This report was generated on Wednesday, 23-Feb-22 22:48:15 CET using arduino-testlib.
Version: 2.1.9
More details
| Board | Claims compatibility | Inclusion | LoopBackDemoTeensy3x |
LoopBackDemoTeensy3xStandardFilterTest |
LoopBackIntensiveTestTeensy3x |
NoRetransmissionAttemptsDemoTeensy3x |
sendfd-even |
sendfd-odd |
LoopBackDemoArduinoUnoNoInt |
LoopBackDemoESP32 |
LoopBackDemoTeensy3xNoInt |
LoopBackDemoArduinoUno |
LoopBackDemoESP32NoInt |
LoopBackDemoTeensy3xExtendedFilterTest |
LoopBackESP32-intensive |
LoopBackDemoTeensy3xWithFilters |
LoopBackTestEndFunctionTeensy3x |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
arduino:avr:uno
1.8.4 |
Yes | PASS | FAIL | FAIL | FAIL | FAIL | FAIL | FAIL | PASS | FAIL | FAIL | PASS | FAIL | FAIL | FAIL | FAIL | FAIL |
|
arduino:mbed_nano:nanorp2040connect
2.7.2 |
Yes | PASS | FAIL | FAIL | FAIL | FAIL | PASS | PASS | PASS | FAIL | FAIL | PASS | FAIL | FAIL | FAIL | FAIL | FAIL |
|
arduino:megaavr:nona4809
1.8.7 |
Yes | PASS | FAIL | FAIL | FAIL | FAIL | FAIL | FAIL | PASS | FAIL | FAIL | PASS | FAIL | FAIL | FAIL | FAIL | FAIL |
|
arduino:samd:mkrwifi1010
1.8.12 |
Yes | PASS | FAIL | FAIL | FAIL | FAIL | PASS | PASS | PASS | FAIL | FAIL | PASS | FAIL | FAIL | FAIL | FAIL | FAIL |
|
esp32:esp32:d1_mini32
1.0.6 |
Yes | PASS | FAIL | FAIL | FAIL | FAIL | FAIL | FAIL | PASS | PASS | FAIL | PASS | PASS | FAIL | PASS | FAIL | FAIL |
Result: PASS
Sketch uses 628 bytes (1%) of program storage space. Maximum is 32256 bytes. Global variables use 13 bytes (0%) of dynamic memory, leaving 2035 bytes for local variables. Maximum is 2048 bytes.
Result: PASS
Sketch uses 10658 bytes (33%) of program storage space. Maximum is 32256 bytes. Global variables use 648 bytes (31%) of dynamic memory, leaving 1400 bytes for local variables. Maximum is 2048 bytes.
Result: PASS
Sketch uses 10658 bytes (33%) of program storage space. Maximum is 32256 bytes. Global variables use 648 bytes (31%) of dynamic memory, leaving 1400 bytes for local variables. Maximum is 2048 bytes.
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ACAN2517FD/examples/LoopBackDemoESP32/LoopBackDemoESP32.ino:6:4: error: #error "Select an ESP32 board"
#error "Select an ESP32 board"
^~~~~
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ACAN2517FD/examples/LoopBackDemoESP32NoInt/LoopBackDemoESP32NoInt.ino:6:4: error: #error "Select an ESP32 board"
#error "Select an ESP32 board"
^~~~~
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ACAN2517FD/examples/LoopBackDemoTeensy3x/LoopBackDemoTeensy3x.ino:30:29: error: 'SPI1' was not declared in this scope
ACAN2517FD can (MCP2517_CS, SPI1, MCP2517_INT) ;
^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ACAN2517FD/examples/LoopBackDemoTeensy3x/LoopBackDemoTeensy3x.ino:30:29: note: suggested alternative: 'SPI'
ACAN2517FD can (MCP2517_CS, SPI1, MCP2517_INT) ;
^~~~
SPI
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ACAN2517FD/examples/LoopBackDemoTeensy3x/LoopBackDemoTeensy3x.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ACAN2517FD/examples/LoopBackDemoTeensy3x/LoopBackDemoTeensy3x.ino:51:19: error: 'SPI1' was not declared in this scope
Serial.println (SPI1.pinIsMOSI (MCP2517_SDI) ? "yes" : "NO!!!") ;
^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ACAN2517FD/examples/LoopBackDemoTeensy3x/LoopBackDemoTeensy3x.ino:51:19: note: suggested alternative: 'SPI'
Serial.println (SPI1.pinIsMOSI (MCP2517_SDI) ? "yes" : "NO!!!") ;
^~~~
SPI
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ACAN2517FD/examples/LoopBackDemoTeensy3xExtendedFilterTest/LoopBackDemoTeensy3xExtendedFilterTest.ino:31:29: error: 'SPI1' was not declared in this scope
ACAN2517FD can (MCP2517_CS, SPI1, MCP2517_INT) ;
^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ACAN2517FD/examples/LoopBackDemoTeensy3xExtendedFilterTest/LoopBackDemoTeensy3xExtendedFilterTest.ino:31:29: note: suggested alternative: 'SPI'
ACAN2517FD can (MCP2517_CS, SPI1, MCP2517_INT) ;
^~~~
SPI
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ACAN2517FD/examples/LoopBackDemoTeensy3xExtendedFilterTest/LoopBackDemoTeensy3xExtendedFilterTest.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ACAN2517FD/examples/LoopBackDemoTeensy3xExtendedFilterTest/LoopBackDemoTeensy3xExtendedFilterTest.ino:49:3: error: 'SPI1' was not declared in this scope
SPI1.setMOSI (MCP2517_SDI) ;
^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ACAN2517FD/examples/LoopBackDemoTeensy3xExtendedFilterTest/LoopBackDemoTeensy3xExtendedFilterTest.ino:49:3: note: suggested alternative: 'SPI'
SPI1.setMOSI (MCP2517_SDI) ;
^~~~
SPI
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ACAN2517FD/examples/LoopBackDemoTeensy3xNoInt/LoopBackDemoTeensy3xNoInt.ino:28:29: error: 'SPI1' was not declared in this scope
ACAN2517FD can (MCP2517_CS, SPI1, 255) ; // Last argument is 255 -> no interrupt pin
^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ACAN2517FD/examples/LoopBackDemoTeensy3xNoInt/LoopBackDemoTeensy3xNoInt.ino:28:29: note: suggested alternative: 'SPI'
ACAN2517FD can (MCP2517_CS, SPI1, 255) ; // Last argument is 255 -> no interrupt pin
^~~~
SPI
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ACAN2517FD/examples/LoopBackDemoTeensy3xNoInt/LoopBackDemoTeensy3xNoInt.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ACAN2517FD/examples/LoopBackDemoTeensy3xNoInt/LoopBackDemoTeensy3xNoInt.ino:49:19: error: 'SPI1' was not declared in this scope
Serial.println (SPI1.pinIsMOSI (MCP2517_SDI) ? "yes" : "NO!!!") ;
^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ACAN2517FD/examples/LoopBackDemoTeensy3xNoInt/LoopBackDemoTeensy3xNoInt.ino:49:19: note: suggested alternative: 'SPI'
Serial.println (SPI1.pinIsMOSI (MCP2517_SDI) ? "yes" : "NO!!!") ;
^~~~
SPI
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ACAN2517FD/examples/LoopBackDemoTeensy3xStandardFilterTest/LoopBackDemoTeensy3xStandardFilterTest.ino:31:29: error: 'SPI1' was not declared in this scope
ACAN2517FD can (MCP2517_CS, SPI1, MCP2517_INT) ;
^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ACAN2517FD/examples/LoopBackDemoTeensy3xStandardFilterTest/LoopBackDemoTeensy3xStandardFilterTest.ino:31:29: note: suggested alternative: 'SPI'
ACAN2517FD can (MCP2517_CS, SPI1, MCP2517_INT) ;
^~~~
SPI
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ACAN2517FD/examples/LoopBackDemoTeensy3xStandardFilterTest/LoopBackDemoTeensy3xStandardFilterTest.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ACAN2517FD/examples/LoopBackDemoTeensy3xStandardFilterTest/LoopBackDemoTeensy3xStandardFilterTest.ino:49:3: error: 'SPI1' was not declared in this scope
SPI1.setMOSI (MCP2517_SDI) ;
^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ACAN2517FD/examples/LoopBackDemoTeensy3xStandardFilterTest/LoopBackDemoTeensy3xStandardFilterTest.ino:49:3: note: suggested alternative: 'SPI'
SPI1.setMOSI (MCP2517_SDI) ;
^~~~
SPI
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ACAN2517FD/examples/LoopBackDemoTeensy3xWithFilters/LoopBackDemoTeensy3xWithFilters.ino:30:29: error: 'SPI1' was not declared in this scope
ACAN2517FD can (MCP2517_CS, SPI1, MCP2517_INT) ;
^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ACAN2517FD/examples/LoopBackDemoTeensy3xWithFilters/LoopBackDemoTeensy3xWithFilters.ino:30:29: note: suggested alternative: 'SPI'
ACAN2517FD can (MCP2517_CS, SPI1, MCP2517_INT) ;
^~~~
SPI
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ACAN2517FD/examples/LoopBackDemoTeensy3xWithFilters/LoopBackDemoTeensy3xWithFilters.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ACAN2517FD/examples/LoopBackDemoTeensy3xWithFilters/LoopBackDemoTeensy3xWithFilters.ino:67:3: error: 'SPI1' was not declared in this scope
SPI1.setMOSI (MCP2517_SDI) ;
^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ACAN2517FD/examples/LoopBackDemoTeensy3xWithFilters/LoopBackDemoTeensy3xWithFilters.ino:67:3: note: suggested alternative: 'SPI'
SPI1.setMOSI (MCP2517_SDI) ;
^~~~
SPI
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ACAN2517FD/examples/LoopBackESP32-intensive/LoopBackESP32-intensive.ino:6:4: error: #error "Select an ESP32 board"
#error "Select an ESP32 board"
^~~~~
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ACAN2517FD/examples/LoopBackIntensiveTestTeensy3x/LoopBackIntensiveTestTeensy3x.ino:30:29: error: 'SPI1' was not declared in this scope
ACAN2517FD can (MCP2517_CS, SPI1, MCP2517_INT) ;
^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ACAN2517FD/examples/LoopBackIntensiveTestTeensy3x/LoopBackIntensiveTestTeensy3x.ino:30:29: note: suggested alternative: 'SPI'
ACAN2517FD can (MCP2517_CS, SPI1, MCP2517_INT) ;
^~~~
SPI
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ACAN2517FD/examples/LoopBackIntensiveTestTeensy3x/LoopBackIntensiveTestTeensy3x.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ACAN2517FD/examples/LoopBackIntensiveTestTeensy3x/LoopBackIntensiveTestTeensy3x.ino:51:19: error: 'SPI1' was not declared in this scope
Serial.println (SPI1.pinIsMOSI (MCP2517_SDI) ? "yes" : "NO!!!") ;
^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ACAN2517FD/examples/LoopBackIntensiveTestTeensy3x/LoopBackIntensiveTestTeensy3x.ino:51:19: note: suggested alternative: 'SPI'
Serial.println (SPI1.pinIsMOSI (MCP2517_SDI) ? "yes" : "NO!!!") ;
^~~~
SPI
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ACAN2517FD/examples/LoopBackTestEndFunctionTeensy3x/LoopBackTestEndFunctionTeensy3x.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ACAN2517FD/examples/LoopBackTestEndFunctionTeensy3x/LoopBackTestEndFunctionTeensy3x.ino:54:19: error: 'SPI1' was not declared in this scope
Serial.println (SPI1.pinIsMOSI (MCP2517_SDI) ? "yes" : "NO!!!") ;
^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ACAN2517FD/examples/LoopBackTestEndFunctionTeensy3x/LoopBackTestEndFunctionTeensy3x.ino:54:19: note: suggested alternative: 'SPI'
Serial.println (SPI1.pinIsMOSI (MCP2517_SDI) ? "yes" : "NO!!!") ;
^~~~
SPI
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ACAN2517FD/examples/LoopBackTestEndFunctionTeensy3x/LoopBackTestEndFunctionTeensy3x.ino: In function 'void loop()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ACAN2517FD/examples/LoopBackTestEndFunctionTeensy3x/LoopBackTestEndFunctionTeensy3x.ino:153:40: error: 'SPI1' was not declared in this scope
can = new ACAN2517FD (MCP2517_CS, SPI1, MCP2517_INT) ;
^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ACAN2517FD/examples/LoopBackTestEndFunctionTeensy3x/LoopBackTestEndFunctionTeensy3x.ino:153:40: note: suggested alternative: 'SPI'
can = new ACAN2517FD (MCP2517_CS, SPI1, MCP2517_INT) ;
^~~~
SPI
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ACAN2517FD/examples/NoRetransmissionAttemptsDemoTeensy3x/NoRetransmissionAttemptsDemoTeensy3x.ino:40:29: error: 'SPI1' was not declared in this scope
ACAN2517FD can (MCP2517_CS, SPI1, MCP2517_INT) ;
^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ACAN2517FD/examples/NoRetransmissionAttemptsDemoTeensy3x/NoRetransmissionAttemptsDemoTeensy3x.ino:40:29: note: suggested alternative: 'SPI'
ACAN2517FD can (MCP2517_CS, SPI1, MCP2517_INT) ;
^~~~
SPI
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ACAN2517FD/examples/NoRetransmissionAttemptsDemoTeensy3x/NoRetransmissionAttemptsDemoTeensy3x.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ACAN2517FD/examples/NoRetransmissionAttemptsDemoTeensy3x/NoRetransmissionAttemptsDemoTeensy3x.ino:61:19: error: 'SPI1' was not declared in this scope
Serial.println (SPI1.pinIsMOSI (MCP2517_SDI) ? "yes" : "NO!!!") ;
^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ACAN2517FD/examples/NoRetransmissionAttemptsDemoTeensy3x/NoRetransmissionAttemptsDemoTeensy3x.ino:61:19: note: suggested alternative: 'SPI'
Serial.println (SPI1.pinIsMOSI (MCP2517_SDI) ? "yes" : "NO!!!") ;
^~~~
SPI
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ACAN2517FD/examples/sendfd-even/sendfd-even.ino:29:29: error: 'SPI1' was not declared in this scope
ACAN2517FD can (MCP2517_CS, SPI1, MCP2517_INT) ;
^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ACAN2517FD/examples/sendfd-even/sendfd-even.ino:29:29: note: suggested alternative: 'SPI'
ACAN2517FD can (MCP2517_CS, SPI1, MCP2517_INT) ;
^~~~
SPI
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ACAN2517FD/examples/sendfd-even/sendfd-even.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ACAN2517FD/examples/sendfd-even/sendfd-even.ino:43:3: error: 'SPI1' was not declared in this scope
SPI1.begin () ;
^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ACAN2517FD/examples/sendfd-even/sendfd-even.ino:43:3: note: suggested alternative: 'SPI'
SPI1.begin () ;
^~~~
SPI
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ACAN2517FD/examples/sendfd-odd/sendfd-odd.ino:29:29: error: 'SPI1' was not declared in this scope
ACAN2517FD can (MCP2517_CS, SPI1, MCP2517_INT) ;
^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ACAN2517FD/examples/sendfd-odd/sendfd-odd.ino:29:29: note: suggested alternative: 'SPI'
ACAN2517FD can (MCP2517_CS, SPI1, MCP2517_INT) ;
^~~~
SPI
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ACAN2517FD/examples/sendfd-odd/sendfd-odd.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ACAN2517FD/examples/sendfd-odd/sendfd-odd.ino:43:3: error: 'SPI1' was not declared in this scope
SPI1.begin () ;
^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ACAN2517FD/examples/sendfd-odd/sendfd-odd.ino:43:3: note: suggested alternative: 'SPI'
SPI1.begin () ;
^~~~
SPI
Result: PASS
Sketch uses 80722 bytes (0%) of program storage space. Maximum is 16777216 bytes. Global variables use 43616 bytes (16%) of dynamic memory, leaving 226720 bytes for local variables. Maximum is 270336 bytes.
Result: PASS
Sketch uses 87754 bytes (0%) of program storage space. Maximum is 16777216 bytes. Global variables use 43956 bytes (16%) of dynamic memory, leaving 226380 bytes for local variables. Maximum is 270336 bytes.
Result: PASS
Sketch uses 87742 bytes (0%) of program storage space. Maximum is 16777216 bytes. Global variables use 43956 bytes (16%) of dynamic memory, leaving 226380 bytes for local variables. Maximum is 270336 bytes.
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ACAN2517FD/examples/LoopBackDemoESP32/LoopBackDemoESP32.ino:6:4: error: #error "Select an ESP32 board"
#error "Select an ESP32 board"
^~~~~
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ACAN2517FD/examples/LoopBackDemoESP32NoInt/LoopBackDemoESP32NoInt.ino:6:4: error: #error "Select an ESP32 board"
#error "Select an ESP32 board"
^~~~~
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ACAN2517FD/examples/LoopBackDemoTeensy3x/LoopBackDemoTeensy3x.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ACAN2517FD/examples/LoopBackDemoTeensy3x/LoopBackDemoTeensy3x.ino:51:24: error: 'class arduino::MbedSPI' has no member named 'pinIsMOSI'
Serial.println (SPI1.pinIsMOSI (MCP2517_SDI) ? "yes" : "NO!!!") ;
^~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ACAN2517FD/examples/LoopBackDemoTeensy3x/LoopBackDemoTeensy3x.ino:55:24: error: 'class arduino::MbedSPI' has no member named 'pinIsMISO'
Serial.println (SPI1.pinIsMISO (MCP2517_SDO) ? "yes" : "NO!!!") ;
^~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ACAN2517FD/examples/LoopBackDemoTeensy3x/LoopBackDemoTeensy3x.ino:59:24: error: 'class arduino::MbedSPI' has no member named 'pinIsSCK'
Serial.println (SPI1.pinIsSCK (MCP2517_SCK) ? "yes" : "NO!!!") ;
^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ACAN2517FD/examples/LoopBackDemoTeensy3x/LoopBackDemoTeensy3x.ino:60:8: error: 'class arduino::MbedSPI' has no member named 'setMOSI'
SPI1.setMOSI (MCP2517_SDI) ;
^~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ACAN2517FD/examples/LoopBackDemoTeensy3x/LoopBackDemoTeensy3x.ino:61:8: error: 'class arduino::MbedSPI' has no member named 'setMISO'
SPI1.setMISO (MCP2517_SDO) ;
^~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ACAN2517FD/examples/LoopBackDemoTeensy3x/LoopBackDemoTeensy3x.ino:62:8: error: 'class arduino::MbedSPI' has no member named 'setSCK'
SPI1.setSCK (MCP2517_SCK) ;
^~~~~~
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ACAN2517FD/examples/LoopBackDemoTeensy3xExtendedFilterTest/LoopBackDemoTeensy3xExtendedFilterTest.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ACAN2517FD/examples/LoopBackDemoTeensy3xExtendedFilterTest/LoopBackDemoTeensy3xExtendedFilterTest.ino:49:8: error: 'class arduino::MbedSPI' has no member named 'setMOSI'
SPI1.setMOSI (MCP2517_SDI) ;
^~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ACAN2517FD/examples/LoopBackDemoTeensy3xExtendedFilterTest/LoopBackDemoTeensy3xExtendedFilterTest.ino:50:8: error: 'class arduino::MbedSPI' has no member named 'setMISO'
SPI1.setMISO (MCP2517_SDO) ;
^~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ACAN2517FD/examples/LoopBackDemoTeensy3xExtendedFilterTest/LoopBackDemoTeensy3xExtendedFilterTest.ino:51:8: error: 'class arduino::MbedSPI' has no member named 'setSCK'
SPI1.setSCK (MCP2517_SCK) ;
^~~~~~
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ACAN2517FD/examples/LoopBackDemoTeensy3xNoInt/LoopBackDemoTeensy3xNoInt.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ACAN2517FD/examples/LoopBackDemoTeensy3xNoInt/LoopBackDemoTeensy3xNoInt.ino:49:24: error: 'class arduino::MbedSPI' has no member named 'pinIsMOSI'
Serial.println (SPI1.pinIsMOSI (MCP2517_SDI) ? "yes" : "NO!!!") ;
^~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ACAN2517FD/examples/LoopBackDemoTeensy3xNoInt/LoopBackDemoTeensy3xNoInt.ino:53:24: error: 'class arduino::MbedSPI' has no member named 'pinIsMISO'
Serial.println (SPI1.pinIsMISO (MCP2517_SDO) ? "yes" : "NO!!!") ;
^~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ACAN2517FD/examples/LoopBackDemoTeensy3xNoInt/LoopBackDemoTeensy3xNoInt.ino:57:24: error: 'class arduino::MbedSPI' has no member named 'pinIsSCK'
Serial.println (SPI1.pinIsSCK (MCP2517_SCK) ? "yes" : "NO!!!") ;
^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ACAN2517FD/examples/LoopBackDemoTeensy3xNoInt/LoopBackDemoTeensy3xNoInt.ino:58:8: error: 'class arduino::MbedSPI' has no member named 'setMOSI'
SPI1.setMOSI (MCP2517_SDI) ;
^~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ACAN2517FD/examples/LoopBackDemoTeensy3xNoInt/LoopBackDemoTeensy3xNoInt.ino:59:8: error: 'class arduino::MbedSPI' has no member named 'setMISO'
SPI1.setMISO (MCP2517_SDO) ;
^~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ACAN2517FD/examples/LoopBackDemoTeensy3xNoInt/LoopBackDemoTeensy3xNoInt.ino:60:8: error: 'class arduino::MbedSPI' has no member named 'setSCK'
SPI1.setSCK (MCP2517_SCK) ;
^~~~~~
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ACAN2517FD/examples/LoopBackDemoTeensy3xStandardFilterTest/LoopBackDemoTeensy3xStandardFilterTest.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ACAN2517FD/examples/LoopBackDemoTeensy3xStandardFilterTest/LoopBackDemoTeensy3xStandardFilterTest.ino:49:8: error: 'class arduino::MbedSPI' has no member named 'setMOSI'
SPI1.setMOSI (MCP2517_SDI) ;
^~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ACAN2517FD/examples/LoopBackDemoTeensy3xStandardFilterTest/LoopBackDemoTeensy3xStandardFilterTest.ino:50:8: error: 'class arduino::MbedSPI' has no member named 'setMISO'
SPI1.setMISO (MCP2517_SDO) ;
^~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ACAN2517FD/examples/LoopBackDemoTeensy3xStandardFilterTest/LoopBackDemoTeensy3xStandardFilterTest.ino:51:8: error: 'class arduino::MbedSPI' has no member named 'setSCK'
SPI1.setSCK (MCP2517_SCK) ;
^~~~~~
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ACAN2517FD/examples/LoopBackDemoTeensy3xWithFilters/LoopBackDemoTeensy3xWithFilters.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ACAN2517FD/examples/LoopBackDemoTeensy3xWithFilters/LoopBackDemoTeensy3xWithFilters.ino:67:8: error: 'class arduino::MbedSPI' has no member named 'setMOSI'
SPI1.setMOSI (MCP2517_SDI) ;
^~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ACAN2517FD/examples/LoopBackDemoTeensy3xWithFilters/LoopBackDemoTeensy3xWithFilters.ino:68:8: error: 'class arduino::MbedSPI' has no member named 'setMISO'
SPI1.setMISO (MCP2517_SDO) ;
^~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ACAN2517FD/examples/LoopBackDemoTeensy3xWithFilters/LoopBackDemoTeensy3xWithFilters.ino:69:8: error: 'class arduino::MbedSPI' has no member named 'setSCK'
SPI1.setSCK (MCP2517_SCK) ;
^~~~~~
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ACAN2517FD/examples/LoopBackESP32-intensive/LoopBackESP32-intensive.ino:6:4: error: #error "Select an ESP32 board"
#error "Select an ESP32 board"
^~~~~
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ACAN2517FD/examples/LoopBackIntensiveTestTeensy3x/LoopBackIntensiveTestTeensy3x.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ACAN2517FD/examples/LoopBackIntensiveTestTeensy3x/LoopBackIntensiveTestTeensy3x.ino:51:24: error: 'class arduino::MbedSPI' has no member named 'pinIsMOSI'
Serial.println (SPI1.pinIsMOSI (MCP2517_SDI) ? "yes" : "NO!!!") ;
^~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ACAN2517FD/examples/LoopBackIntensiveTestTeensy3x/LoopBackIntensiveTestTeensy3x.ino:55:24: error: 'class arduino::MbedSPI' has no member named 'pinIsMISO'
Serial.println (SPI1.pinIsMISO (MCP2517_SDO) ? "yes" : "NO!!!") ;
^~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ACAN2517FD/examples/LoopBackIntensiveTestTeensy3x/LoopBackIntensiveTestTeensy3x.ino:59:24: error: 'class arduino::MbedSPI' has no member named 'pinIsSCK'
Serial.println (SPI1.pinIsSCK (MCP2517_SCK) ? "yes" : "NO!!!") ;
^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ACAN2517FD/examples/LoopBackIntensiveTestTeensy3x/LoopBackIntensiveTestTeensy3x.ino:60:8: error: 'class arduino::MbedSPI' has no member named 'setMOSI'
SPI1.setMOSI (MCP2517_SDI) ;
^~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ACAN2517FD/examples/LoopBackIntensiveTestTeensy3x/LoopBackIntensiveTestTeensy3x.ino:61:8: error: 'class arduino::MbedSPI' has no member named 'setMISO'
SPI1.setMISO (MCP2517_SDO) ;
^~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ACAN2517FD/examples/LoopBackIntensiveTestTeensy3x/LoopBackIntensiveTestTeensy3x.ino:62:8: error: 'class arduino::MbedSPI' has no member named 'setSCK'
SPI1.setSCK (MCP2517_SCK) ;
^~~~~~
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ACAN2517FD/examples/LoopBackTestEndFunctionTeensy3x/LoopBackTestEndFunctionTeensy3x.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ACAN2517FD/examples/LoopBackTestEndFunctionTeensy3x/LoopBackTestEndFunctionTeensy3x.ino:54:24: error: 'class arduino::MbedSPI' has no member named 'pinIsMOSI'
Serial.println (SPI1.pinIsMOSI (MCP2517_SDI) ? "yes" : "NO!!!") ;
^~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ACAN2517FD/examples/LoopBackTestEndFunctionTeensy3x/LoopBackTestEndFunctionTeensy3x.ino:58:24: error: 'class arduino::MbedSPI' has no member named 'pinIsMISO'
Serial.println (SPI1.pinIsMISO (MCP2517_SDO) ? "yes" : "NO!!!") ;
^~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ACAN2517FD/examples/LoopBackTestEndFunctionTeensy3x/LoopBackTestEndFunctionTeensy3x.ino:62:24: error: 'class arduino::MbedSPI' has no member named 'pinIsSCK'
Serial.println (SPI1.pinIsSCK (MCP2517_SCK) ? "yes" : "NO!!!") ;
^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ACAN2517FD/examples/LoopBackTestEndFunctionTeensy3x/LoopBackTestEndFunctionTeensy3x.ino:63:8: error: 'class arduino::MbedSPI' has no member named 'setMOSI'
SPI1.setMOSI (MCP2517_SDI) ;
^~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ACAN2517FD/examples/LoopBackTestEndFunctionTeensy3x/LoopBackTestEndFunctionTeensy3x.ino:64:8: error: 'class arduino::MbedSPI' has no member named 'setMISO'
SPI1.setMISO (MCP2517_SDO) ;
^~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ACAN2517FD/examples/LoopBackTestEndFunctionTeensy3x/LoopBackTestEndFunctionTeensy3x.ino:65:8: error: 'class arduino::MbedSPI' has no member named 'setSCK'
SPI1.setSCK (MCP2517_SCK) ;
^~~~~~
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ACAN2517FD/examples/NoRetransmissionAttemptsDemoTeensy3x/NoRetransmissionAttemptsDemoTeensy3x.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ACAN2517FD/examples/NoRetransmissionAttemptsDemoTeensy3x/NoRetransmissionAttemptsDemoTeensy3x.ino:61:24: error: 'class arduino::MbedSPI' has no member named 'pinIsMOSI'
Serial.println (SPI1.pinIsMOSI (MCP2517_SDI) ? "yes" : "NO!!!") ;
^~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ACAN2517FD/examples/NoRetransmissionAttemptsDemoTeensy3x/NoRetransmissionAttemptsDemoTeensy3x.ino:65:24: error: 'class arduino::MbedSPI' has no member named 'pinIsMISO'
Serial.println (SPI1.pinIsMISO (MCP2517_SDO) ? "yes" : "NO!!!") ;
^~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ACAN2517FD/examples/NoRetransmissionAttemptsDemoTeensy3x/NoRetransmissionAttemptsDemoTeensy3x.ino:69:24: error: 'class arduino::MbedSPI' has no member named 'pinIsSCK'
Serial.println (SPI1.pinIsSCK (MCP2517_SCK) ? "yes" : "NO!!!") ;
^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ACAN2517FD/examples/NoRetransmissionAttemptsDemoTeensy3x/NoRetransmissionAttemptsDemoTeensy3x.ino:70:8: error: 'class arduino::MbedSPI' has no member named 'setMOSI'
SPI1.setMOSI (MCP2517_SDI) ;
^~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ACAN2517FD/examples/NoRetransmissionAttemptsDemoTeensy3x/NoRetransmissionAttemptsDemoTeensy3x.ino:71:8: error: 'class arduino::MbedSPI' has no member named 'setMISO'
SPI1.setMISO (MCP2517_SDO) ;
^~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ACAN2517FD/examples/NoRetransmissionAttemptsDemoTeensy3x/NoRetransmissionAttemptsDemoTeensy3x.ino:72:8: error: 'class arduino::MbedSPI' has no member named 'setSCK'
SPI1.setSCK (MCP2517_SCK) ;
^~~~~~
Result: PASS
Sketch uses 87994 bytes (0%) of program storage space. Maximum is 16777216 bytes. Global variables use 43952 bytes (16%) of dynamic memory, leaving 226384 bytes for local variables. Maximum is 270336 bytes.
Result: PASS
Sketch uses 88206 bytes (0%) of program storage space. Maximum is 16777216 bytes. Global variables use 43960 bytes (16%) of dynamic memory, leaving 226376 bytes for local variables. Maximum is 270336 bytes.
Result: PASS
Sketch uses 3798 bytes (7%) of program storage space. Maximum is 49152 bytes. Global variables use 136 bytes (2%) of dynamic memory, leaving 6008 bytes for local variables. Maximum is 6144 bytes.
Result: PASS
Sketch uses 14218 bytes (28%) of program storage space. Maximum is 49152 bytes. Global variables use 528 bytes (8%) of dynamic memory, leaving 5616 bytes for local variables. Maximum is 6144 bytes.
Result: PASS
Sketch uses 14212 bytes (28%) of program storage space. Maximum is 49152 bytes. Global variables use 528 bytes (8%) of dynamic memory, leaving 5616 bytes for local variables. Maximum is 6144 bytes.
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ACAN2517FD/examples/LoopBackDemoESP32/LoopBackDemoESP32.ino:6:4: error: #error "Select an ESP32 board"
#error "Select an ESP32 board"
^~~~~
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ACAN2517FD/examples/LoopBackDemoESP32NoInt/LoopBackDemoESP32NoInt.ino:6:4: error: #error "Select an ESP32 board"
#error "Select an ESP32 board"
^~~~~
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ACAN2517FD/examples/LoopBackDemoTeensy3x/LoopBackDemoTeensy3x.ino:30:29: error: 'SPI1' was not declared in this scope
ACAN2517FD can (MCP2517_CS, SPI1, MCP2517_INT) ;
^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ACAN2517FD/examples/LoopBackDemoTeensy3x/LoopBackDemoTeensy3x.ino:30:29: note: suggested alternative: 'SPI'
ACAN2517FD can (MCP2517_CS, SPI1, MCP2517_INT) ;
^~~~
SPI
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ACAN2517FD/examples/LoopBackDemoTeensy3x/LoopBackDemoTeensy3x.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ACAN2517FD/examples/LoopBackDemoTeensy3x/LoopBackDemoTeensy3x.ino:51:19: error: 'SPI1' was not declared in this scope
Serial.println (SPI1.pinIsMOSI (MCP2517_SDI) ? "yes" : "NO!!!") ;
^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ACAN2517FD/examples/LoopBackDemoTeensy3x/LoopBackDemoTeensy3x.ino:51:19: note: suggested alternative: 'SPI'
Serial.println (SPI1.pinIsMOSI (MCP2517_SDI) ? "yes" : "NO!!!") ;
^~~~
SPI
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ACAN2517FD/examples/LoopBackDemoTeensy3xExtendedFilterTest/LoopBackDemoTeensy3xExtendedFilterTest.ino:31:29: error: 'SPI1' was not declared in this scope
ACAN2517FD can (MCP2517_CS, SPI1, MCP2517_INT) ;
^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ACAN2517FD/examples/LoopBackDemoTeensy3xExtendedFilterTest/LoopBackDemoTeensy3xExtendedFilterTest.ino:31:29: note: suggested alternative: 'SPI'
ACAN2517FD can (MCP2517_CS, SPI1, MCP2517_INT) ;
^~~~
SPI
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ACAN2517FD/examples/LoopBackDemoTeensy3xExtendedFilterTest/LoopBackDemoTeensy3xExtendedFilterTest.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ACAN2517FD/examples/LoopBackDemoTeensy3xExtendedFilterTest/LoopBackDemoTeensy3xExtendedFilterTest.ino:49:3: error: 'SPI1' was not declared in this scope
SPI1.setMOSI (MCP2517_SDI) ;
^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ACAN2517FD/examples/LoopBackDemoTeensy3xExtendedFilterTest/LoopBackDemoTeensy3xExtendedFilterTest.ino:49:3: note: suggested alternative: 'SPI'
SPI1.setMOSI (MCP2517_SDI) ;
^~~~
SPI
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ACAN2517FD/examples/LoopBackDemoTeensy3xNoInt/LoopBackDemoTeensy3xNoInt.ino:28:29: error: 'SPI1' was not declared in this scope
ACAN2517FD can (MCP2517_CS, SPI1, 255) ; // Last argument is 255 -> no interrupt pin
^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ACAN2517FD/examples/LoopBackDemoTeensy3xNoInt/LoopBackDemoTeensy3xNoInt.ino:28:29: note: suggested alternative: 'SPI'
ACAN2517FD can (MCP2517_CS, SPI1, 255) ; // Last argument is 255 -> no interrupt pin
^~~~
SPI
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ACAN2517FD/examples/LoopBackDemoTeensy3xNoInt/LoopBackDemoTeensy3xNoInt.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ACAN2517FD/examples/LoopBackDemoTeensy3xNoInt/LoopBackDemoTeensy3xNoInt.ino:49:19: error: 'SPI1' was not declared in this scope
Serial.println (SPI1.pinIsMOSI (MCP2517_SDI) ? "yes" : "NO!!!") ;
^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ACAN2517FD/examples/LoopBackDemoTeensy3xNoInt/LoopBackDemoTeensy3xNoInt.ino:49:19: note: suggested alternative: 'SPI'
Serial.println (SPI1.pinIsMOSI (MCP2517_SDI) ? "yes" : "NO!!!") ;
^~~~
SPI
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ACAN2517FD/examples/LoopBackDemoTeensy3xStandardFilterTest/LoopBackDemoTeensy3xStandardFilterTest.ino:31:29: error: 'SPI1' was not declared in this scope
ACAN2517FD can (MCP2517_CS, SPI1, MCP2517_INT) ;
^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ACAN2517FD/examples/LoopBackDemoTeensy3xStandardFilterTest/LoopBackDemoTeensy3xStandardFilterTest.ino:31:29: note: suggested alternative: 'SPI'
ACAN2517FD can (MCP2517_CS, SPI1, MCP2517_INT) ;
^~~~
SPI
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ACAN2517FD/examples/LoopBackDemoTeensy3xStandardFilterTest/LoopBackDemoTeensy3xStandardFilterTest.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ACAN2517FD/examples/LoopBackDemoTeensy3xStandardFilterTest/LoopBackDemoTeensy3xStandardFilterTest.ino:49:3: error: 'SPI1' was not declared in this scope
SPI1.setMOSI (MCP2517_SDI) ;
^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ACAN2517FD/examples/LoopBackDemoTeensy3xStandardFilterTest/LoopBackDemoTeensy3xStandardFilterTest.ino:49:3: note: suggested alternative: 'SPI'
SPI1.setMOSI (MCP2517_SDI) ;
^~~~
SPI
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ACAN2517FD/examples/LoopBackDemoTeensy3xWithFilters/LoopBackDemoTeensy3xWithFilters.ino:30:29: error: 'SPI1' was not declared in this scope
ACAN2517FD can (MCP2517_CS, SPI1, MCP2517_INT) ;
^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ACAN2517FD/examples/LoopBackDemoTeensy3xWithFilters/LoopBackDemoTeensy3xWithFilters.ino:30:29: note: suggested alternative: 'SPI'
ACAN2517FD can (MCP2517_CS, SPI1, MCP2517_INT) ;
^~~~
SPI
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ACAN2517FD/examples/LoopBackDemoTeensy3xWithFilters/LoopBackDemoTeensy3xWithFilters.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ACAN2517FD/examples/LoopBackDemoTeensy3xWithFilters/LoopBackDemoTeensy3xWithFilters.ino:67:3: error: 'SPI1' was not declared in this scope
SPI1.setMOSI (MCP2517_SDI) ;
^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ACAN2517FD/examples/LoopBackDemoTeensy3xWithFilters/LoopBackDemoTeensy3xWithFilters.ino:67:3: note: suggested alternative: 'SPI'
SPI1.setMOSI (MCP2517_SDI) ;
^~~~
SPI
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ACAN2517FD/examples/LoopBackESP32-intensive/LoopBackESP32-intensive.ino:6:4: error: #error "Select an ESP32 board"
#error "Select an ESP32 board"
^~~~~
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ACAN2517FD/examples/LoopBackIntensiveTestTeensy3x/LoopBackIntensiveTestTeensy3x.ino:30:29: error: 'SPI1' was not declared in this scope
ACAN2517FD can (MCP2517_CS, SPI1, MCP2517_INT) ;
^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ACAN2517FD/examples/LoopBackIntensiveTestTeensy3x/LoopBackIntensiveTestTeensy3x.ino:30:29: note: suggested alternative: 'SPI'
ACAN2517FD can (MCP2517_CS, SPI1, MCP2517_INT) ;
^~~~
SPI
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ACAN2517FD/examples/LoopBackIntensiveTestTeensy3x/LoopBackIntensiveTestTeensy3x.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ACAN2517FD/examples/LoopBackIntensiveTestTeensy3x/LoopBackIntensiveTestTeensy3x.ino:51:19: error: 'SPI1' was not declared in this scope
Serial.println (SPI1.pinIsMOSI (MCP2517_SDI) ? "yes" : "NO!!!") ;
^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ACAN2517FD/examples/LoopBackIntensiveTestTeensy3x/LoopBackIntensiveTestTeensy3x.ino:51:19: note: suggested alternative: 'SPI'
Serial.println (SPI1.pinIsMOSI (MCP2517_SDI) ? "yes" : "NO!!!") ;
^~~~
SPI
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ACAN2517FD/examples/LoopBackTestEndFunctionTeensy3x/LoopBackTestEndFunctionTeensy3x.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ACAN2517FD/examples/LoopBackTestEndFunctionTeensy3x/LoopBackTestEndFunctionTeensy3x.ino:54:19: error: 'SPI1' was not declared in this scope
Serial.println (SPI1.pinIsMOSI (MCP2517_SDI) ? "yes" : "NO!!!") ;
^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ACAN2517FD/examples/LoopBackTestEndFunctionTeensy3x/LoopBackTestEndFunctionTeensy3x.ino:54:19: note: suggested alternative: 'SPI'
Serial.println (SPI1.pinIsMOSI (MCP2517_SDI) ? "yes" : "NO!!!") ;
^~~~
SPI
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ACAN2517FD/examples/LoopBackTestEndFunctionTeensy3x/LoopBackTestEndFunctionTeensy3x.ino: In function 'void loop()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ACAN2517FD/examples/LoopBackTestEndFunctionTeensy3x/LoopBackTestEndFunctionTeensy3x.ino:153:40: error: 'SPI1' was not declared in this scope
can = new ACAN2517FD (MCP2517_CS, SPI1, MCP2517_INT) ;
^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ACAN2517FD/examples/LoopBackTestEndFunctionTeensy3x/LoopBackTestEndFunctionTeensy3x.ino:153:40: note: suggested alternative: 'SPI'
can = new ACAN2517FD (MCP2517_CS, SPI1, MCP2517_INT) ;
^~~~
SPI
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ACAN2517FD/examples/NoRetransmissionAttemptsDemoTeensy3x/NoRetransmissionAttemptsDemoTeensy3x.ino:40:29: error: 'SPI1' was not declared in this scope
ACAN2517FD can (MCP2517_CS, SPI1, MCP2517_INT) ;
^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ACAN2517FD/examples/NoRetransmissionAttemptsDemoTeensy3x/NoRetransmissionAttemptsDemoTeensy3x.ino:40:29: note: suggested alternative: 'SPI'
ACAN2517FD can (MCP2517_CS, SPI1, MCP2517_INT) ;
^~~~
SPI
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ACAN2517FD/examples/NoRetransmissionAttemptsDemoTeensy3x/NoRetransmissionAttemptsDemoTeensy3x.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ACAN2517FD/examples/NoRetransmissionAttemptsDemoTeensy3x/NoRetransmissionAttemptsDemoTeensy3x.ino:61:19: error: 'SPI1' was not declared in this scope
Serial.println (SPI1.pinIsMOSI (MCP2517_SDI) ? "yes" : "NO!!!") ;
^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ACAN2517FD/examples/NoRetransmissionAttemptsDemoTeensy3x/NoRetransmissionAttemptsDemoTeensy3x.ino:61:19: note: suggested alternative: 'SPI'
Serial.println (SPI1.pinIsMOSI (MCP2517_SDI) ? "yes" : "NO!!!") ;
^~~~
SPI
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ACAN2517FD/examples/sendfd-even/sendfd-even.ino:29:29: error: 'SPI1' was not declared in this scope
ACAN2517FD can (MCP2517_CS, SPI1, MCP2517_INT) ;
^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ACAN2517FD/examples/sendfd-even/sendfd-even.ino:29:29: note: suggested alternative: 'SPI'
ACAN2517FD can (MCP2517_CS, SPI1, MCP2517_INT) ;
^~~~
SPI
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ACAN2517FD/examples/sendfd-even/sendfd-even.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ACAN2517FD/examples/sendfd-even/sendfd-even.ino:43:3: error: 'SPI1' was not declared in this scope
SPI1.begin () ;
^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ACAN2517FD/examples/sendfd-even/sendfd-even.ino:43:3: note: suggested alternative: 'SPI'
SPI1.begin () ;
^~~~
SPI
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ACAN2517FD/examples/sendfd-odd/sendfd-odd.ino:29:29: error: 'SPI1' was not declared in this scope
ACAN2517FD can (MCP2517_CS, SPI1, MCP2517_INT) ;
^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ACAN2517FD/examples/sendfd-odd/sendfd-odd.ino:29:29: note: suggested alternative: 'SPI'
ACAN2517FD can (MCP2517_CS, SPI1, MCP2517_INT) ;
^~~~
SPI
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ACAN2517FD/examples/sendfd-odd/sendfd-odd.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ACAN2517FD/examples/sendfd-odd/sendfd-odd.ino:43:3: error: 'SPI1' was not declared in this scope
SPI1.begin () ;
^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ACAN2517FD/examples/sendfd-odd/sendfd-odd.ino:43:3: note: suggested alternative: 'SPI'
SPI1.begin () ;
^~~~
SPI
Result: PASS
Sketch uses 13396 bytes (5%) of program storage space. Maximum is 262144 bytes. Global variables use 3208 bytes (9%) of dynamic memory, leaving 29560 bytes for local variables. Maximum is 32768 bytes.
Result: PASS
Sketch uses 20076 bytes (7%) of program storage space. Maximum is 262144 bytes. Global variables use 3312 bytes (10%) of dynamic memory, leaving 29456 bytes for local variables. Maximum is 32768 bytes.
Result: PASS
Sketch uses 20064 bytes (7%) of program storage space. Maximum is 262144 bytes. Global variables use 3312 bytes (10%) of dynamic memory, leaving 29456 bytes for local variables. Maximum is 32768 bytes.
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ACAN2517FD/examples/LoopBackDemoESP32/LoopBackDemoESP32.ino:6:4: error: #error "Select an ESP32 board"
#error "Select an ESP32 board"
^~~~~
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ACAN2517FD/examples/LoopBackDemoESP32NoInt/LoopBackDemoESP32NoInt.ino:6:4: error: #error "Select an ESP32 board"
#error "Select an ESP32 board"
^~~~~
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ACAN2517FD/examples/LoopBackDemoTeensy3x/LoopBackDemoTeensy3x.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ACAN2517FD/examples/LoopBackDemoTeensy3x/LoopBackDemoTeensy3x.ino:51:24: error: 'class SPIClassSAMD' has no member named 'pinIsMOSI'
Serial.println (SPI1.pinIsMOSI (MCP2517_SDI) ? "yes" : "NO!!!") ;
^~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ACAN2517FD/examples/LoopBackDemoTeensy3x/LoopBackDemoTeensy3x.ino:55:24: error: 'class SPIClassSAMD' has no member named 'pinIsMISO'
Serial.println (SPI1.pinIsMISO (MCP2517_SDO) ? "yes" : "NO!!!") ;
^~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ACAN2517FD/examples/LoopBackDemoTeensy3x/LoopBackDemoTeensy3x.ino:59:24: error: 'class SPIClassSAMD' has no member named 'pinIsSCK'
Serial.println (SPI1.pinIsSCK (MCP2517_SCK) ? "yes" : "NO!!!") ;
^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ACAN2517FD/examples/LoopBackDemoTeensy3x/LoopBackDemoTeensy3x.ino:60:8: error: 'class SPIClassSAMD' has no member named 'setMOSI'
SPI1.setMOSI (MCP2517_SDI) ;
^~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ACAN2517FD/examples/LoopBackDemoTeensy3x/LoopBackDemoTeensy3x.ino:61:8: error: 'class SPIClassSAMD' has no member named 'setMISO'
SPI1.setMISO (MCP2517_SDO) ;
^~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ACAN2517FD/examples/LoopBackDemoTeensy3x/LoopBackDemoTeensy3x.ino:62:8: error: 'class SPIClassSAMD' has no member named 'setSCK'
SPI1.setSCK (MCP2517_SCK) ;
^~~~~~
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ACAN2517FD/examples/LoopBackDemoTeensy3xExtendedFilterTest/LoopBackDemoTeensy3xExtendedFilterTest.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ACAN2517FD/examples/LoopBackDemoTeensy3xExtendedFilterTest/LoopBackDemoTeensy3xExtendedFilterTest.ino:49:8: error: 'class SPIClassSAMD' has no member named 'setMOSI'
SPI1.setMOSI (MCP2517_SDI) ;
^~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ACAN2517FD/examples/LoopBackDemoTeensy3xExtendedFilterTest/LoopBackDemoTeensy3xExtendedFilterTest.ino:50:8: error: 'class SPIClassSAMD' has no member named 'setMISO'
SPI1.setMISO (MCP2517_SDO) ;
^~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ACAN2517FD/examples/LoopBackDemoTeensy3xExtendedFilterTest/LoopBackDemoTeensy3xExtendedFilterTest.ino:51:8: error: 'class SPIClassSAMD' has no member named 'setSCK'
SPI1.setSCK (MCP2517_SCK) ;
^~~~~~
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ACAN2517FD/examples/LoopBackDemoTeensy3xNoInt/LoopBackDemoTeensy3xNoInt.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ACAN2517FD/examples/LoopBackDemoTeensy3xNoInt/LoopBackDemoTeensy3xNoInt.ino:49:24: error: 'class SPIClassSAMD' has no member named 'pinIsMOSI'
Serial.println (SPI1.pinIsMOSI (MCP2517_SDI) ? "yes" : "NO!!!") ;
^~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ACAN2517FD/examples/LoopBackDemoTeensy3xNoInt/LoopBackDemoTeensy3xNoInt.ino:53:24: error: 'class SPIClassSAMD' has no member named 'pinIsMISO'
Serial.println (SPI1.pinIsMISO (MCP2517_SDO) ? "yes" : "NO!!!") ;
^~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ACAN2517FD/examples/LoopBackDemoTeensy3xNoInt/LoopBackDemoTeensy3xNoInt.ino:57:24: error: 'class SPIClassSAMD' has no member named 'pinIsSCK'
Serial.println (SPI1.pinIsSCK (MCP2517_SCK) ? "yes" : "NO!!!") ;
^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ACAN2517FD/examples/LoopBackDemoTeensy3xNoInt/LoopBackDemoTeensy3xNoInt.ino:58:8: error: 'class SPIClassSAMD' has no member named 'setMOSI'
SPI1.setMOSI (MCP2517_SDI) ;
^~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ACAN2517FD/examples/LoopBackDemoTeensy3xNoInt/LoopBackDemoTeensy3xNoInt.ino:59:8: error: 'class SPIClassSAMD' has no member named 'setMISO'
SPI1.setMISO (MCP2517_SDO) ;
^~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ACAN2517FD/examples/LoopBackDemoTeensy3xNoInt/LoopBackDemoTeensy3xNoInt.ino:60:8: error: 'class SPIClassSAMD' has no member named 'setSCK'
SPI1.setSCK (MCP2517_SCK) ;
^~~~~~
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ACAN2517FD/examples/LoopBackDemoTeensy3xStandardFilterTest/LoopBackDemoTeensy3xStandardFilterTest.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ACAN2517FD/examples/LoopBackDemoTeensy3xStandardFilterTest/LoopBackDemoTeensy3xStandardFilterTest.ino:49:8: error: 'class SPIClassSAMD' has no member named 'setMOSI'
SPI1.setMOSI (MCP2517_SDI) ;
^~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ACAN2517FD/examples/LoopBackDemoTeensy3xStandardFilterTest/LoopBackDemoTeensy3xStandardFilterTest.ino:50:8: error: 'class SPIClassSAMD' has no member named 'setMISO'
SPI1.setMISO (MCP2517_SDO) ;
^~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ACAN2517FD/examples/LoopBackDemoTeensy3xStandardFilterTest/LoopBackDemoTeensy3xStandardFilterTest.ino:51:8: error: 'class SPIClassSAMD' has no member named 'setSCK'
SPI1.setSCK (MCP2517_SCK) ;
^~~~~~
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ACAN2517FD/examples/LoopBackDemoTeensy3xWithFilters/LoopBackDemoTeensy3xWithFilters.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ACAN2517FD/examples/LoopBackDemoTeensy3xWithFilters/LoopBackDemoTeensy3xWithFilters.ino:67:8: error: 'class SPIClassSAMD' has no member named 'setMOSI'
SPI1.setMOSI (MCP2517_SDI) ;
^~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ACAN2517FD/examples/LoopBackDemoTeensy3xWithFilters/LoopBackDemoTeensy3xWithFilters.ino:68:8: error: 'class SPIClassSAMD' has no member named 'setMISO'
SPI1.setMISO (MCP2517_SDO) ;
^~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ACAN2517FD/examples/LoopBackDemoTeensy3xWithFilters/LoopBackDemoTeensy3xWithFilters.ino:69:8: error: 'class SPIClassSAMD' has no member named 'setSCK'
SPI1.setSCK (MCP2517_SCK) ;
^~~~~~
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ACAN2517FD/examples/LoopBackESP32-intensive/LoopBackESP32-intensive.ino:6:4: error: #error "Select an ESP32 board"
#error "Select an ESP32 board"
^~~~~
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ACAN2517FD/examples/LoopBackIntensiveTestTeensy3x/LoopBackIntensiveTestTeensy3x.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ACAN2517FD/examples/LoopBackIntensiveTestTeensy3x/LoopBackIntensiveTestTeensy3x.ino:51:24: error: 'class SPIClassSAMD' has no member named 'pinIsMOSI'
Serial.println (SPI1.pinIsMOSI (MCP2517_SDI) ? "yes" : "NO!!!") ;
^~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ACAN2517FD/examples/LoopBackIntensiveTestTeensy3x/LoopBackIntensiveTestTeensy3x.ino:55:24: error: 'class SPIClassSAMD' has no member named 'pinIsMISO'
Serial.println (SPI1.pinIsMISO (MCP2517_SDO) ? "yes" : "NO!!!") ;
^~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ACAN2517FD/examples/LoopBackIntensiveTestTeensy3x/LoopBackIntensiveTestTeensy3x.ino:59:24: error: 'class SPIClassSAMD' has no member named 'pinIsSCK'
Serial.println (SPI1.pinIsSCK (MCP2517_SCK) ? "yes" : "NO!!!") ;
^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ACAN2517FD/examples/LoopBackIntensiveTestTeensy3x/LoopBackIntensiveTestTeensy3x.ino:60:8: error: 'class SPIClassSAMD' has no member named 'setMOSI'
SPI1.setMOSI (MCP2517_SDI) ;
^~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ACAN2517FD/examples/LoopBackIntensiveTestTeensy3x/LoopBackIntensiveTestTeensy3x.ino:61:8: error: 'class SPIClassSAMD' has no member named 'setMISO'
SPI1.setMISO (MCP2517_SDO) ;
^~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ACAN2517FD/examples/LoopBackIntensiveTestTeensy3x/LoopBackIntensiveTestTeensy3x.ino:62:8: error: 'class SPIClassSAMD' has no member named 'setSCK'
SPI1.setSCK (MCP2517_SCK) ;
^~~~~~
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ACAN2517FD/examples/LoopBackTestEndFunctionTeensy3x/LoopBackTestEndFunctionTeensy3x.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ACAN2517FD/examples/LoopBackTestEndFunctionTeensy3x/LoopBackTestEndFunctionTeensy3x.ino:54:24: error: 'class SPIClassSAMD' has no member named 'pinIsMOSI'
Serial.println (SPI1.pinIsMOSI (MCP2517_SDI) ? "yes" : "NO!!!") ;
^~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ACAN2517FD/examples/LoopBackTestEndFunctionTeensy3x/LoopBackTestEndFunctionTeensy3x.ino:58:24: error: 'class SPIClassSAMD' has no member named 'pinIsMISO'
Serial.println (SPI1.pinIsMISO (MCP2517_SDO) ? "yes" : "NO!!!") ;
^~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ACAN2517FD/examples/LoopBackTestEndFunctionTeensy3x/LoopBackTestEndFunctionTeensy3x.ino:62:24: error: 'class SPIClassSAMD' has no member named 'pinIsSCK'
Serial.println (SPI1.pinIsSCK (MCP2517_SCK) ? "yes" : "NO!!!") ;
^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ACAN2517FD/examples/LoopBackTestEndFunctionTeensy3x/LoopBackTestEndFunctionTeensy3x.ino:63:8: error: 'class SPIClassSAMD' has no member named 'setMOSI'
SPI1.setMOSI (MCP2517_SDI) ;
^~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ACAN2517FD/examples/LoopBackTestEndFunctionTeensy3x/LoopBackTestEndFunctionTeensy3x.ino:64:8: error: 'class SPIClassSAMD' has no member named 'setMISO'
SPI1.setMISO (MCP2517_SDO) ;
^~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ACAN2517FD/examples/LoopBackTestEndFunctionTeensy3x/LoopBackTestEndFunctionTeensy3x.ino:65:8: error: 'class SPIClassSAMD' has no member named 'setSCK'
SPI1.setSCK (MCP2517_SCK) ;
^~~~~~
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ACAN2517FD/examples/NoRetransmissionAttemptsDemoTeensy3x/NoRetransmissionAttemptsDemoTeensy3x.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ACAN2517FD/examples/NoRetransmissionAttemptsDemoTeensy3x/NoRetransmissionAttemptsDemoTeensy3x.ino:61:24: error: 'class SPIClassSAMD' has no member named 'pinIsMOSI'
Serial.println (SPI1.pinIsMOSI (MCP2517_SDI) ? "yes" : "NO!!!") ;
^~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ACAN2517FD/examples/NoRetransmissionAttemptsDemoTeensy3x/NoRetransmissionAttemptsDemoTeensy3x.ino:65:24: error: 'class SPIClassSAMD' has no member named 'pinIsMISO'
Serial.println (SPI1.pinIsMISO (MCP2517_SDO) ? "yes" : "NO!!!") ;
^~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ACAN2517FD/examples/NoRetransmissionAttemptsDemoTeensy3x/NoRetransmissionAttemptsDemoTeensy3x.ino:69:24: error: 'class SPIClassSAMD' has no member named 'pinIsSCK'
Serial.println (SPI1.pinIsSCK (MCP2517_SCK) ? "yes" : "NO!!!") ;
^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ACAN2517FD/examples/NoRetransmissionAttemptsDemoTeensy3x/NoRetransmissionAttemptsDemoTeensy3x.ino:70:8: error: 'class SPIClassSAMD' has no member named 'setMOSI'
SPI1.setMOSI (MCP2517_SDI) ;
^~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ACAN2517FD/examples/NoRetransmissionAttemptsDemoTeensy3x/NoRetransmissionAttemptsDemoTeensy3x.ino:71:8: error: 'class SPIClassSAMD' has no member named 'setMISO'
SPI1.setMISO (MCP2517_SDO) ;
^~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ACAN2517FD/examples/NoRetransmissionAttemptsDemoTeensy3x/NoRetransmissionAttemptsDemoTeensy3x.ino:72:8: error: 'class SPIClassSAMD' has no member named 'setSCK'
SPI1.setSCK (MCP2517_SCK) ;
^~~~~~
Result: PASS
Sketch uses 20248 bytes (7%) of program storage space. Maximum is 262144 bytes. Global variables use 3312 bytes (10%) of dynamic memory, leaving 29456 bytes for local variables. Maximum is 32768 bytes.
Result: PASS
Sketch uses 20492 bytes (7%) of program storage space. Maximum is 262144 bytes. Global variables use 3316 bytes (10%) of dynamic memory, leaving 29452 bytes for local variables. Maximum is 32768 bytes.
Result: PASS
Sketch uses 199706 bytes (15%) of program storage space. Maximum is 1310720 bytes. Global variables use 13128 bytes (4%) of dynamic memory, leaving 314552 bytes for local variables. Maximum is 327680 bytes.
Result: PASS
Sketch uses 217466 bytes (16%) of program storage space. Maximum is 1310720 bytes. Global variables use 14080 bytes (4%) of dynamic memory, leaving 313600 bytes for local variables. Maximum is 327680 bytes.
Result: PASS
Sketch uses 217438 bytes (16%) of program storage space. Maximum is 1310720 bytes. Global variables use 14080 bytes (4%) of dynamic memory, leaving 313600 bytes for local variables. Maximum is 327680 bytes.
Result: PASS
Sketch uses 217486 bytes (16%) of program storage space. Maximum is 1310720 bytes. Global variables use 14072 bytes (4%) of dynamic memory, leaving 313608 bytes for local variables. Maximum is 327680 bytes.
Result: PASS
Sketch uses 217466 bytes (16%) of program storage space. Maximum is 1310720 bytes. Global variables use 14072 bytes (4%) of dynamic memory, leaving 313608 bytes for local variables. Maximum is 327680 bytes.
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ACAN2517FD/examples/LoopBackDemoTeensy3x/LoopBackDemoTeensy3x.ino:30:29: error: 'SPI1' was not declared in this scope
ACAN2517FD can (MCP2517_CS, SPI1, MCP2517_INT) ;
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ACAN2517FD/examples/LoopBackDemoTeensy3x/LoopBackDemoTeensy3x.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ACAN2517FD/examples/LoopBackDemoTeensy3x/LoopBackDemoTeensy3x.ino:51:19: error: 'SPI1' was not declared in this scope
Serial.println (SPI1.pinIsMOSI (MCP2517_SDI) ? "yes" : "NO!!!") ;
^
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ACAN2517FD/examples/LoopBackDemoTeensy3xExtendedFilterTest/LoopBackDemoTeensy3xExtendedFilterTest.ino:31:29: error: 'SPI1' was not declared in this scope
ACAN2517FD can (MCP2517_CS, SPI1, MCP2517_INT) ;
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ACAN2517FD/examples/LoopBackDemoTeensy3xExtendedFilterTest/LoopBackDemoTeensy3xExtendedFilterTest.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ACAN2517FD/examples/LoopBackDemoTeensy3xExtendedFilterTest/LoopBackDemoTeensy3xExtendedFilterTest.ino:49:3: error: 'SPI1' was not declared in this scope
SPI1.setMOSI (MCP2517_SDI) ;
^
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ACAN2517FD/examples/LoopBackDemoTeensy3xNoInt/LoopBackDemoTeensy3xNoInt.ino:28:29: error: 'SPI1' was not declared in this scope
ACAN2517FD can (MCP2517_CS, SPI1, 255) ; // Last argument is 255 -> no interrupt pin
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ACAN2517FD/examples/LoopBackDemoTeensy3xNoInt/LoopBackDemoTeensy3xNoInt.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ACAN2517FD/examples/LoopBackDemoTeensy3xNoInt/LoopBackDemoTeensy3xNoInt.ino:49:19: error: 'SPI1' was not declared in this scope
Serial.println (SPI1.pinIsMOSI (MCP2517_SDI) ? "yes" : "NO!!!") ;
^
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ACAN2517FD/examples/LoopBackDemoTeensy3xStandardFilterTest/LoopBackDemoTeensy3xStandardFilterTest.ino:31:29: error: 'SPI1' was not declared in this scope
ACAN2517FD can (MCP2517_CS, SPI1, MCP2517_INT) ;
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ACAN2517FD/examples/LoopBackDemoTeensy3xStandardFilterTest/LoopBackDemoTeensy3xStandardFilterTest.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ACAN2517FD/examples/LoopBackDemoTeensy3xStandardFilterTest/LoopBackDemoTeensy3xStandardFilterTest.ino:49:3: error: 'SPI1' was not declared in this scope
SPI1.setMOSI (MCP2517_SDI) ;
^
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ACAN2517FD/examples/LoopBackDemoTeensy3xWithFilters/LoopBackDemoTeensy3xWithFilters.ino:30:29: error: 'SPI1' was not declared in this scope
ACAN2517FD can (MCP2517_CS, SPI1, MCP2517_INT) ;
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ACAN2517FD/examples/LoopBackDemoTeensy3xWithFilters/LoopBackDemoTeensy3xWithFilters.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ACAN2517FD/examples/LoopBackDemoTeensy3xWithFilters/LoopBackDemoTeensy3xWithFilters.ino:67:3: error: 'SPI1' was not declared in this scope
SPI1.setMOSI (MCP2517_SDI) ;
^
Result: PASS
Sketch uses 217386 bytes (16%) of program storage space. Maximum is 1310720 bytes. Global variables use 14104 bytes (4%) of dynamic memory, leaving 313576 bytes for local variables. Maximum is 327680 bytes.
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ACAN2517FD/examples/LoopBackIntensiveTestTeensy3x/LoopBackIntensiveTestTeensy3x.ino:30:29: error: 'SPI1' was not declared in this scope
ACAN2517FD can (MCP2517_CS, SPI1, MCP2517_INT) ;
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ACAN2517FD/examples/LoopBackIntensiveTestTeensy3x/LoopBackIntensiveTestTeensy3x.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ACAN2517FD/examples/LoopBackIntensiveTestTeensy3x/LoopBackIntensiveTestTeensy3x.ino:51:19: error: 'SPI1' was not declared in this scope
Serial.println (SPI1.pinIsMOSI (MCP2517_SDI) ? "yes" : "NO!!!") ;
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ACAN2517FD/examples/LoopBackIntensiveTestTeensy3x/LoopBackIntensiveTestTeensy3x.ino: In function 'void loop()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ACAN2517FD/examples/LoopBackIntensiveTestTeensy3x/LoopBackIntensiveTestTeensy3x.ino:138:34: error: no matching function for call to 'random()'
gCurrentFrame.ext = (random () & 1) == 0 ;
^
In file included from /tmp/arduino-sketch-42A14CA9398182813D64BD4CE180FF43/sketch/LoopBackIntensiveTestTeensy3x.ino.cpp:1:0:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/esp32/hardware/esp32/1.0.6/cores/esp32/Arduino.h:121:6: note: candidate: long int random(long int, long int)
long random(long, long);
^
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/esp32/hardware/esp32/1.0.6/cores/esp32/Arduino.h:121:6: note: candidate expects 2 arguments, 0 provided
In file included from /tmp/arduino-sketch-42A14CA9398182813D64BD4CE180FF43/sketch/LoopBackIntensiveTestTeensy3x.ino.cpp:1:0:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/esp32/hardware/esp32/1.0.6/cores/esp32/Arduino.h:179:6: note: candidate: long int random(long int)
long random(long);
^
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/esp32/hardware/esp32/1.0.6/cores/esp32/Arduino.h:179:6: note: candidate expects 1 argument, 0 provided
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ACAN2517FD/examples/LoopBackIntensiveTestTeensy3x/LoopBackIntensiveTestTeensy3x.ino:139:43: error: no matching function for call to 'random()'
gCurrentFrame.id = (uint32_t) random () ;
^
In file included from /tmp/arduino-sketch-42A14CA9398182813D64BD4CE180FF43/sketch/LoopBackIntensiveTestTeensy3x.ino.cpp:1:0:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/esp32/hardware/esp32/1.0.6/cores/esp32/Arduino.h:121:6: note: candidate: long int random(long int, long int)
long random(long, long);
^
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/esp32/hardware/esp32/1.0.6/cores/esp32/Arduino.h:121:6: note: candidate expects 2 arguments, 0 provided
In file included from /tmp/arduino-sketch-42A14CA9398182813D64BD4CE180FF43/sketch/LoopBackIntensiveTestTeensy3x.ino.cpp:1:0:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/esp32/hardware/esp32/1.0.6/cores/esp32/Arduino.h:179:6: note: candidate: long int random(long int)
long random(long);
^
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/esp32/hardware/esp32/1.0.6/cores/esp32/Arduino.h:179:6: note: candidate expects 1 argument, 0 provided
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ACAN2517FD/examples/LoopBackIntensiveTestTeensy3x/LoopBackIntensiveTestTeensy3x.ino:145:56: error: no matching function for call to 'random()'
gCurrentFrame.len = (uint8_t) (((uint32_t) random ()) % 65) ;
^
In file included from /tmp/arduino-sketch-42A14CA9398182813D64BD4CE180FF43/sketch/LoopBackIntensiveTestTeensy3x.ino.cpp:1:0:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/esp32/hardware/esp32/1.0.6/cores/esp32/Arduino.h:121:6: note: candidate: long int random(long int, long int)
long random(long, long);
^
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/esp32/hardware/esp32/1.0.6/cores/esp32/Arduino.h:121:6: note: candidate expects 2 arguments, 0 provided
In file included from /tmp/arduino-sketch-42A14CA9398182813D64BD4CE180FF43/sketch/LoopBackIntensiveTestTeensy3x.ino.cpp:1:0:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/esp32/hardware/esp32/1.0.6/cores/esp32/Arduino.h:179:6: note: candidate: long int random(long int)
long random(long);
^
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/esp32/hardware/esp32/1.0.6/cores/esp32/Arduino.h:179:6: note: candidate expects 1 argument, 0 provided
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ACAN2517FD/examples/LoopBackIntensiveTestTeensy3x/LoopBackIntensiveTestTeensy3x.ino:147:50: error: no matching function for call to 'random()'
gCurrentFrame.data [i] = (uint8_t) random () ;
^
In file included from /tmp/arduino-sketch-42A14CA9398182813D64BD4CE180FF43/sketch/LoopBackIntensiveTestTeensy3x.ino.cpp:1:0:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/esp32/hardware/esp32/1.0.6/cores/esp32/Arduino.h:121:6: note: candidate: long int random(long int, long int)
long random(long, long);
^
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/esp32/hardware/esp32/1.0.6/cores/esp32/Arduino.h:121:6: note: candidate expects 2 arguments, 0 provided
In file included from /tmp/arduino-sketch-42A14CA9398182813D64BD4CE180FF43/sketch/LoopBackIntensiveTestTeensy3x.ino.cpp:1:0:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/esp32/hardware/esp32/1.0.6/cores/esp32/Arduino.h:179:6: note: candidate: long int random(long int)
long random(long);
^
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/esp32/hardware/esp32/1.0.6/cores/esp32/Arduino.h:179:6: note: candidate expects 1 argument, 0 provided
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ACAN2517FD/examples/LoopBackTestEndFunctionTeensy3x/LoopBackTestEndFunctionTeensy3x.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ACAN2517FD/examples/LoopBackTestEndFunctionTeensy3x/LoopBackTestEndFunctionTeensy3x.ino:54:19: error: 'SPI1' was not declared in this scope
Serial.println (SPI1.pinIsMOSI (MCP2517_SDI) ? "yes" : "NO!!!") ;
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ACAN2517FD/examples/LoopBackTestEndFunctionTeensy3x/LoopBackTestEndFunctionTeensy3x.ino: In function 'void loop()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ACAN2517FD/examples/LoopBackTestEndFunctionTeensy3x/LoopBackTestEndFunctionTeensy3x.ino:153:40: error: 'SPI1' was not declared in this scope
can = new ACAN2517FD (MCP2517_CS, SPI1, MCP2517_INT) ;
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ACAN2517FD/examples/LoopBackTestEndFunctionTeensy3x/LoopBackTestEndFunctionTeensy3x.ino:158:34: error: no matching function for call to 'random()'
gCurrentFrame.ext = (random () & 1) == 0 ;
^
In file included from /tmp/arduino-sketch-3CF9BEB4F75F7121376F1B06A8AFCB39/sketch/LoopBackTestEndFunctionTeensy3x.ino.cpp:1:0:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/esp32/hardware/esp32/1.0.6/cores/esp32/Arduino.h:121:6: note: candidate: long int random(long int, long int)
long random(long, long);
^
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/esp32/hardware/esp32/1.0.6/cores/esp32/Arduino.h:121:6: note: candidate expects 2 arguments, 0 provided
In file included from /tmp/arduino-sketch-3CF9BEB4F75F7121376F1B06A8AFCB39/sketch/LoopBackTestEndFunctionTeensy3x.ino.cpp:1:0:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/esp32/hardware/esp32/1.0.6/cores/esp32/Arduino.h:179:6: note: candidate: long int random(long int)
long random(long);
^
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/esp32/hardware/esp32/1.0.6/cores/esp32/Arduino.h:179:6: note: candidate expects 1 argument, 0 provided
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ACAN2517FD/examples/LoopBackTestEndFunctionTeensy3x/LoopBackTestEndFunctionTeensy3x.ino:159:43: error: no matching function for call to 'random()'
gCurrentFrame.id = (uint32_t) random () ;
^
In file included from /tmp/arduino-sketch-3CF9BEB4F75F7121376F1B06A8AFCB39/sketch/LoopBackTestEndFunctionTeensy3x.ino.cpp:1:0:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/esp32/hardware/esp32/1.0.6/cores/esp32/Arduino.h:121:6: note: candidate: long int random(long int, long int)
long random(long, long);
^
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/esp32/hardware/esp32/1.0.6/cores/esp32/Arduino.h:121:6: note: candidate expects 2 arguments, 0 provided
In file included from /tmp/arduino-sketch-3CF9BEB4F75F7121376F1B06A8AFCB39/sketch/LoopBackTestEndFunctionTeensy3x.ino.cpp:1:0:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/esp32/hardware/esp32/1.0.6/cores/esp32/Arduino.h:179:6: note: candidate: long int random(long int)
long random(long);
^
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/esp32/hardware/esp32/1.0.6/cores/esp32/Arduino.h:179:6: note: candidate expects 1 argument, 0 provided
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ACAN2517FD/examples/LoopBackTestEndFunctionTeensy3x/LoopBackTestEndFunctionTeensy3x.ino:165:56: error: no matching function for call to 'random()'
gCurrentFrame.len = (uint8_t) (((uint32_t) random ()) % 65) ;
^
In file included from /tmp/arduino-sketch-3CF9BEB4F75F7121376F1B06A8AFCB39/sketch/LoopBackTestEndFunctionTeensy3x.ino.cpp:1:0:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/esp32/hardware/esp32/1.0.6/cores/esp32/Arduino.h:121:6: note: candidate: long int random(long int, long int)
long random(long, long);
^
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/esp32/hardware/esp32/1.0.6/cores/esp32/Arduino.h:121:6: note: candidate expects 2 arguments, 0 provided
In file included from /tmp/arduino-sketch-3CF9BEB4F75F7121376F1B06A8AFCB39/sketch/LoopBackTestEndFunctionTeensy3x.ino.cpp:1:0:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/esp32/hardware/esp32/1.0.6/cores/esp32/Arduino.h:179:6: note: candidate: long int random(long int)
long random(long);
^
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/esp32/hardware/esp32/1.0.6/cores/esp32/Arduino.h:179:6: note: candidate expects 1 argument, 0 provided
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ACAN2517FD/examples/LoopBackTestEndFunctionTeensy3x/LoopBackTestEndFunctionTeensy3x.ino:167:50: error: no matching function for call to 'random()'
gCurrentFrame.data [i] = (uint8_t) random () ;
^
In file included from /tmp/arduino-sketch-3CF9BEB4F75F7121376F1B06A8AFCB39/sketch/LoopBackTestEndFunctionTeensy3x.ino.cpp:1:0:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/esp32/hardware/esp32/1.0.6/cores/esp32/Arduino.h:121:6: note: candidate: long int random(long int, long int)
long random(long, long);
^
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/esp32/hardware/esp32/1.0.6/cores/esp32/Arduino.h:121:6: note: candidate expects 2 arguments, 0 provided
In file included from /tmp/arduino-sketch-3CF9BEB4F75F7121376F1B06A8AFCB39/sketch/LoopBackTestEndFunctionTeensy3x.ino.cpp:1:0:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/esp32/hardware/esp32/1.0.6/cores/esp32/Arduino.h:179:6: note: candidate: long int random(long int)
long random(long);
^
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/esp32/hardware/esp32/1.0.6/cores/esp32/Arduino.h:179:6: note: candidate expects 1 argument, 0 provided
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ACAN2517FD/examples/NoRetransmissionAttemptsDemoTeensy3x/NoRetransmissionAttemptsDemoTeensy3x.ino:40:29: error: 'SPI1' was not declared in this scope
ACAN2517FD can (MCP2517_CS, SPI1, MCP2517_INT) ;
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ACAN2517FD/examples/NoRetransmissionAttemptsDemoTeensy3x/NoRetransmissionAttemptsDemoTeensy3x.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ACAN2517FD/examples/NoRetransmissionAttemptsDemoTeensy3x/NoRetransmissionAttemptsDemoTeensy3x.ino:61:19: error: 'SPI1' was not declared in this scope
Serial.println (SPI1.pinIsMOSI (MCP2517_SDI) ? "yes" : "NO!!!") ;
^
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ACAN2517FD/examples/sendfd-even/sendfd-even.ino:29:29: error: 'SPI1' was not declared in this scope
ACAN2517FD can (MCP2517_CS, SPI1, MCP2517_INT) ;
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ACAN2517FD/examples/sendfd-even/sendfd-even.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ACAN2517FD/examples/sendfd-even/sendfd-even.ino:43:3: error: 'SPI1' was not declared in this scope
SPI1.begin () ;
^
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ACAN2517FD/examples/sendfd-odd/sendfd-odd.ino:29:29: error: 'SPI1' was not declared in this scope
ACAN2517FD can (MCP2517_CS, SPI1, MCP2517_INT) ;
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ACAN2517FD/examples/sendfd-odd/sendfd-odd.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ACAN2517FD/examples/sendfd-odd/sendfd-odd.ino:43:3: error: 'SPI1' was not declared in this scope
SPI1.begin () ;
^