This report was generated on Wednesday, 23-Feb-22 22:48:15 CET using arduino-testlib.
Version: 2.1.3
More details
| Board | Claims compatibility | Inclusion | ADXL345_pitch_roll_corrected_angles |
ADXL345_angles_orientation |
ADXL345_data_ready_interrupt |
ADXL345_fifo_stream |
ADXL345_fifo_trigger |
ADXL345_free_fall_interrupt |
ADXL345_SPI_basic_data |
ADXL345_activity_inactivity_interrupt |
ADXL345_auto_sleep |
ADXL345_calibration |
ADXL345_double_tap |
ADXL345_single_tap |
ADXL345_sleep |
ADXL345_basic_data |
ADXL345_fifo_fifo |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
arduino:avr:uno
1.8.4 |
Yes | PASS | PASS | PASS | PASS | PASS | PASS | PASS | PASS | PASS | PASS | PASS | PASS | PASS | PASS | PASS | PASS |
|
arduino:mbed_nano:nanorp2040connect
2.7.2 |
Yes ⚠️ | FAIL | FAIL | FAIL | FAIL | FAIL | FAIL | FAIL | FAIL | FAIL | FAIL | FAIL | FAIL | FAIL | FAIL | FAIL | FAIL |
|
arduino:megaavr:nona4809
1.8.7 |
Yes | PASS | PASS | PASS | PASS | PASS | PASS | PASS | PASS | PASS | PASS | PASS | PASS | PASS | PASS | PASS | PASS |
|
arduino:samd:mkrwifi1010
1.8.12 |
Yes ⚠️ | FAIL | FAIL | FAIL | FAIL | FAIL | FAIL | FAIL | FAIL | FAIL | FAIL | FAIL | FAIL | FAIL | FAIL | FAIL | FAIL |
|
esp32:esp32:d1_mini32
1.0.6 |
Yes | PASS | PASS | PASS | PASS | PASS | PASS | PASS | PASS | PASS | PASS | PASS | PASS | PASS | PASS | PASS | PASS |
Result: PASS
Sketch uses 1636 bytes (5%) of program storage space. Maximum is 32256 bytes. Global variables use 122 bytes (5%) of dynamic memory, leaving 1926 bytes for local variables. Maximum is 2048 bytes.
Result: PASS
Sketch uses 10670 bytes (33%) of program storage space. Maximum is 32256 bytes. Global variables use 751 bytes (36%) of dynamic memory, leaving 1297 bytes for local variables. Maximum is 2048 bytes.
Result: PASS
Sketch uses 11052 bytes (34%) of program storage space. Maximum is 32256 bytes. Global variables use 843 bytes (41%) of dynamic memory, leaving 1205 bytes for local variables. Maximum is 2048 bytes.
Result: PASS
Sketch uses 12960 bytes (40%) of program storage space. Maximum is 32256 bytes. Global variables use 1000 bytes (48%) of dynamic memory, leaving 1048 bytes for local variables. Maximum is 2048 bytes.
Result: PASS
Sketch uses 10750 bytes (33%) of program storage space. Maximum is 32256 bytes. Global variables use 803 bytes (39%) of dynamic memory, leaving 1245 bytes for local variables. Maximum is 2048 bytes.
Result: PASS
Sketch uses 10698 bytes (33%) of program storage space. Maximum is 32256 bytes. Global variables use 784 bytes (38%) of dynamic memory, leaving 1264 bytes for local variables. Maximum is 2048 bytes.
Result: PASS
Sketch uses 7922 bytes (24%) of program storage space. Maximum is 32256 bytes. Global variables use 1142 bytes (55%) of dynamic memory, leaving 906 bytes for local variables. Maximum is 2048 bytes.
Result: PASS
Sketch uses 10384 bytes (32%) of program storage space. Maximum is 32256 bytes. Global variables use 761 bytes (37%) of dynamic memory, leaving 1287 bytes for local variables. Maximum is 2048 bytes.
Result: PASS
Sketch uses 11042 bytes (34%) of program storage space. Maximum is 32256 bytes. Global variables use 819 bytes (39%) of dynamic memory, leaving 1229 bytes for local variables. Maximum is 2048 bytes.
Result: PASS
Sketch uses 10876 bytes (33%) of program storage space. Maximum is 32256 bytes. Global variables use 915 bytes (44%) of dynamic memory, leaving 1133 bytes for local variables. Maximum is 2048 bytes.
Result: PASS
Sketch uses 11080 bytes (34%) of program storage space. Maximum is 32256 bytes. Global variables use 963 bytes (47%) of dynamic memory, leaving 1085 bytes for local variables. Maximum is 2048 bytes.
Result: PASS
Sketch uses 11042 bytes (34%) of program storage space. Maximum is 32256 bytes. Global variables use 903 bytes (44%) of dynamic memory, leaving 1145 bytes for local variables. Maximum is 2048 bytes.
Result: PASS
Sketch uses 11140 bytes (34%) of program storage space. Maximum is 32256 bytes. Global variables use 835 bytes (40%) of dynamic memory, leaving 1213 bytes for local variables. Maximum is 2048 bytes.
Result: PASS
Sketch uses 12350 bytes (38%) of program storage space. Maximum is 32256 bytes. Global variables use 858 bytes (41%) of dynamic memory, leaving 1190 bytes for local variables. Maximum is 2048 bytes.
Result: PASS
Sketch uses 10930 bytes (33%) of program storage space. Maximum is 32256 bytes. Global variables use 813 bytes (39%) of dynamic memory, leaving 1235 bytes for local variables. Maximum is 2048 bytes.
Result: PASS
Sketch uses 10426 bytes (32%) of program storage space. Maximum is 32256 bytes. Global variables use 788 bytes (38%) of dynamic memory, leaving 1260 bytes for local variables. Maximum is 2048 bytes.
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ADXL345_WE/src/ADXL345_WE.cpp: In member function 'bool ADXL345_WE::init()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ADXL345_WE/src/ADXL345_WE.cpp:62:15: error: 'arduino::SPIClass {aka class arduino::HardwareSPI}' has no member named 'setDataMode'
_spi->setDataMode(SPI_MODE3);
^~~~~~~~~~~
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ADXL345_WE/src/ADXL345_WE.cpp: In member function 'bool ADXL345_WE::init()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ADXL345_WE/src/ADXL345_WE.cpp:62:15: error: 'arduino::SPIClass {aka class arduino::HardwareSPI}' has no member named 'setDataMode'
_spi->setDataMode(SPI_MODE3);
^~~~~~~~~~~
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ADXL345_WE/src/ADXL345_WE.cpp: In member function 'bool ADXL345_WE::init()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ADXL345_WE/src/ADXL345_WE.cpp:62:15: error: 'arduino::SPIClass {aka class arduino::HardwareSPI}' has no member named 'setDataMode'
_spi->setDataMode(SPI_MODE3);
^~~~~~~~~~~
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ADXL345_WE/src/ADXL345_WE.cpp: In member function 'bool ADXL345_WE::init()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ADXL345_WE/src/ADXL345_WE.cpp:62:15: error: 'arduino::SPIClass {aka class arduino::HardwareSPI}' has no member named 'setDataMode'
_spi->setDataMode(SPI_MODE3);
^~~~~~~~~~~
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ADXL345_WE/src/ADXL345_WE.cpp: In member function 'bool ADXL345_WE::init()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ADXL345_WE/src/ADXL345_WE.cpp:62:15: error: 'arduino::SPIClass {aka class arduino::HardwareSPI}' has no member named 'setDataMode'
_spi->setDataMode(SPI_MODE3);
^~~~~~~~~~~
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ADXL345_WE/src/ADXL345_WE.cpp: In member function 'bool ADXL345_WE::init()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ADXL345_WE/src/ADXL345_WE.cpp:62:15: error: 'arduino::SPIClass {aka class arduino::HardwareSPI}' has no member named 'setDataMode'
_spi->setDataMode(SPI_MODE3);
^~~~~~~~~~~
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ADXL345_WE/src/ADXL345_WE.cpp: In member function 'bool ADXL345_WE::init()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ADXL345_WE/src/ADXL345_WE.cpp:62:15: error: 'arduino::SPIClass {aka class arduino::HardwareSPI}' has no member named 'setDataMode'
_spi->setDataMode(SPI_MODE3);
^~~~~~~~~~~
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ADXL345_WE/src/ADXL345_WE.cpp: In member function 'bool ADXL345_WE::init()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ADXL345_WE/src/ADXL345_WE.cpp:62:15: error: 'arduino::SPIClass {aka class arduino::HardwareSPI}' has no member named 'setDataMode'
_spi->setDataMode(SPI_MODE3);
^~~~~~~~~~~
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ADXL345_WE/src/ADXL345_WE.cpp: In member function 'bool ADXL345_WE::init()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ADXL345_WE/src/ADXL345_WE.cpp:62:15: error: 'arduino::SPIClass {aka class arduino::HardwareSPI}' has no member named 'setDataMode'
_spi->setDataMode(SPI_MODE3);
^~~~~~~~~~~
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ADXL345_WE/src/ADXL345_WE.cpp: In member function 'bool ADXL345_WE::init()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ADXL345_WE/src/ADXL345_WE.cpp:62:15: error: 'arduino::SPIClass {aka class arduino::HardwareSPI}' has no member named 'setDataMode'
_spi->setDataMode(SPI_MODE3);
^~~~~~~~~~~
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ADXL345_WE/src/ADXL345_WE.cpp: In member function 'bool ADXL345_WE::init()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ADXL345_WE/src/ADXL345_WE.cpp:62:15: error: 'arduino::SPIClass {aka class arduino::HardwareSPI}' has no member named 'setDataMode'
_spi->setDataMode(SPI_MODE3);
^~~~~~~~~~~
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ADXL345_WE/src/ADXL345_WE.cpp: In member function 'bool ADXL345_WE::init()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ADXL345_WE/src/ADXL345_WE.cpp:62:15: error: 'arduino::SPIClass {aka class arduino::HardwareSPI}' has no member named 'setDataMode'
_spi->setDataMode(SPI_MODE3);
^~~~~~~~~~~
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ADXL345_WE/src/ADXL345_WE.cpp: In member function 'bool ADXL345_WE::init()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ADXL345_WE/src/ADXL345_WE.cpp:62:15: error: 'arduino::SPIClass {aka class arduino::HardwareSPI}' has no member named 'setDataMode'
_spi->setDataMode(SPI_MODE3);
^~~~~~~~~~~
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ADXL345_WE/src/ADXL345_WE.cpp: In member function 'bool ADXL345_WE::init()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ADXL345_WE/src/ADXL345_WE.cpp:62:15: error: 'arduino::SPIClass {aka class arduino::HardwareSPI}' has no member named 'setDataMode'
_spi->setDataMode(SPI_MODE3);
^~~~~~~~~~~
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ADXL345_WE/src/ADXL345_WE.cpp: In member function 'bool ADXL345_WE::init()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ADXL345_WE/src/ADXL345_WE.cpp:62:15: error: 'arduino::SPIClass {aka class arduino::HardwareSPI}' has no member named 'setDataMode'
_spi->setDataMode(SPI_MODE3);
^~~~~~~~~~~
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ADXL345_WE/src/ADXL345_WE.cpp: In member function 'bool ADXL345_WE::init()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ADXL345_WE/src/ADXL345_WE.cpp:62:15: error: 'arduino::SPIClass {aka class arduino::HardwareSPI}' has no member named 'setDataMode'
_spi->setDataMode(SPI_MODE3);
^~~~~~~~~~~
Result: PASS
Sketch uses 5482 bytes (11%) of program storage space. Maximum is 49152 bytes. Global variables use 335 bytes (5%) of dynamic memory, leaving 5809 bytes for local variables. Maximum is 6144 bytes.
Result: PASS
Sketch uses 13445 bytes (27%) of program storage space. Maximum is 49152 bytes. Global variables use 641 bytes (10%) of dynamic memory, leaving 5503 bytes for local variables. Maximum is 6144 bytes.
Result: PASS
Sketch uses 14080 bytes (28%) of program storage space. Maximum is 49152 bytes. Global variables use 780 bytes (12%) of dynamic memory, leaving 5364 bytes for local variables. Maximum is 6144 bytes.
Result: PASS
Sketch uses 15549 bytes (31%) of program storage space. Maximum is 49152 bytes. Global variables use 587 bytes (9%) of dynamic memory, leaving 5557 bytes for local variables. Maximum is 6144 bytes.
Result: PASS
Sketch uses 13689 bytes (27%) of program storage space. Maximum is 49152 bytes. Global variables use 780 bytes (12%) of dynamic memory, leaving 5364 bytes for local variables. Maximum is 6144 bytes.
Result: PASS
Sketch uses 13383 bytes (27%) of program storage space. Maximum is 49152 bytes. Global variables use 587 bytes (9%) of dynamic memory, leaving 5557 bytes for local variables. Maximum is 6144 bytes.
Result: PASS
Sketch uses 10934 bytes (22%) of program storage space. Maximum is 49152 bytes. Global variables use 587 bytes (9%) of dynamic memory, leaving 5557 bytes for local variables. Maximum is 6144 bytes.
Result: PASS
Sketch uses 13326 bytes (27%) of program storage space. Maximum is 49152 bytes. Global variables use 780 bytes (12%) of dynamic memory, leaving 5364 bytes for local variables. Maximum is 6144 bytes.
Result: PASS
Sketch uses 14070 bytes (28%) of program storage space. Maximum is 49152 bytes. Global variables use 780 bytes (12%) of dynamic memory, leaving 5364 bytes for local variables. Maximum is 6144 bytes.
Result: PASS
Sketch uses 13887 bytes (28%) of program storage space. Maximum is 49152 bytes. Global variables use 780 bytes (12%) of dynamic memory, leaving 5364 bytes for local variables. Maximum is 6144 bytes.
Result: PASS
Sketch uses 14021 bytes (28%) of program storage space. Maximum is 49152 bytes. Global variables use 780 bytes (12%) of dynamic memory, leaving 5364 bytes for local variables. Maximum is 6144 bytes.
Result: PASS
Sketch uses 13983 bytes (28%) of program storage space. Maximum is 49152 bytes. Global variables use 780 bytes (12%) of dynamic memory, leaving 5364 bytes for local variables. Maximum is 6144 bytes.
Result: PASS
Sketch uses 14214 bytes (28%) of program storage space. Maximum is 49152 bytes. Global variables use 780 bytes (12%) of dynamic memory, leaving 5364 bytes for local variables. Maximum is 6144 bytes.
Result: PASS
Sketch uses 14970 bytes (30%) of program storage space. Maximum is 49152 bytes. Global variables use 587 bytes (9%) of dynamic memory, leaving 5557 bytes for local variables. Maximum is 6144 bytes.
Result: PASS
Sketch uses 13957 bytes (28%) of program storage space. Maximum is 49152 bytes. Global variables use 780 bytes (12%) of dynamic memory, leaving 5364 bytes for local variables. Maximum is 6144 bytes.
Result: PASS
Sketch uses 13064 bytes (26%) of program storage space. Maximum is 49152 bytes. Global variables use 587 bytes (9%) of dynamic memory, leaving 5557 bytes for local variables. Maximum is 6144 bytes.
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ADXL345_WE/src/ADXL345_WE.cpp: In member function 'bool ADXL345_WE::init()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ADXL345_WE/src/ADXL345_WE.cpp:62:15: error: 'arduino::SPIClass {aka class arduino::HardwareSPI}' has no member named 'setDataMode'
_spi->setDataMode(SPI_MODE3);
^~~~~~~~~~~
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ADXL345_WE/src/ADXL345_WE.cpp: In member function 'bool ADXL345_WE::init()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ADXL345_WE/src/ADXL345_WE.cpp:62:15: error: 'arduino::SPIClass {aka class arduino::HardwareSPI}' has no member named 'setDataMode'
_spi->setDataMode(SPI_MODE3);
^~~~~~~~~~~
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ADXL345_WE/src/ADXL345_WE.cpp: In member function 'bool ADXL345_WE::init()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ADXL345_WE/src/ADXL345_WE.cpp:62:15: error: 'arduino::SPIClass {aka class arduino::HardwareSPI}' has no member named 'setDataMode'
_spi->setDataMode(SPI_MODE3);
^~~~~~~~~~~
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ADXL345_WE/src/ADXL345_WE.cpp: In member function 'bool ADXL345_WE::init()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ADXL345_WE/src/ADXL345_WE.cpp:62:15: error: 'arduino::SPIClass {aka class arduino::HardwareSPI}' has no member named 'setDataMode'
_spi->setDataMode(SPI_MODE3);
^~~~~~~~~~~
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ADXL345_WE/src/ADXL345_WE.cpp: In member function 'bool ADXL345_WE::init()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ADXL345_WE/src/ADXL345_WE.cpp:62:15: error: 'arduino::SPIClass {aka class arduino::HardwareSPI}' has no member named 'setDataMode'
_spi->setDataMode(SPI_MODE3);
^~~~~~~~~~~
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ADXL345_WE/src/ADXL345_WE.cpp: In member function 'bool ADXL345_WE::init()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ADXL345_WE/src/ADXL345_WE.cpp:62:15: error: 'arduino::SPIClass {aka class arduino::HardwareSPI}' has no member named 'setDataMode'
_spi->setDataMode(SPI_MODE3);
^~~~~~~~~~~
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ADXL345_WE/src/ADXL345_WE.cpp: In member function 'bool ADXL345_WE::init()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ADXL345_WE/src/ADXL345_WE.cpp:62:15: error: 'arduino::SPIClass {aka class arduino::HardwareSPI}' has no member named 'setDataMode'
_spi->setDataMode(SPI_MODE3);
^~~~~~~~~~~
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ADXL345_WE/src/ADXL345_WE.cpp: In member function 'bool ADXL345_WE::init()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ADXL345_WE/src/ADXL345_WE.cpp:62:15: error: 'arduino::SPIClass {aka class arduino::HardwareSPI}' has no member named 'setDataMode'
_spi->setDataMode(SPI_MODE3);
^~~~~~~~~~~
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ADXL345_WE/src/ADXL345_WE.cpp: In member function 'bool ADXL345_WE::init()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ADXL345_WE/src/ADXL345_WE.cpp:62:15: error: 'arduino::SPIClass {aka class arduino::HardwareSPI}' has no member named 'setDataMode'
_spi->setDataMode(SPI_MODE3);
^~~~~~~~~~~
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ADXL345_WE/src/ADXL345_WE.cpp: In member function 'bool ADXL345_WE::init()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ADXL345_WE/src/ADXL345_WE.cpp:62:15: error: 'arduino::SPIClass {aka class arduino::HardwareSPI}' has no member named 'setDataMode'
_spi->setDataMode(SPI_MODE3);
^~~~~~~~~~~
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ADXL345_WE/src/ADXL345_WE.cpp: In member function 'bool ADXL345_WE::init()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ADXL345_WE/src/ADXL345_WE.cpp:62:15: error: 'arduino::SPIClass {aka class arduino::HardwareSPI}' has no member named 'setDataMode'
_spi->setDataMode(SPI_MODE3);
^~~~~~~~~~~
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ADXL345_WE/src/ADXL345_WE.cpp: In member function 'bool ADXL345_WE::init()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ADXL345_WE/src/ADXL345_WE.cpp:62:15: error: 'arduino::SPIClass {aka class arduino::HardwareSPI}' has no member named 'setDataMode'
_spi->setDataMode(SPI_MODE3);
^~~~~~~~~~~
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ADXL345_WE/src/ADXL345_WE.cpp: In member function 'bool ADXL345_WE::init()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ADXL345_WE/src/ADXL345_WE.cpp:62:15: error: 'arduino::SPIClass {aka class arduino::HardwareSPI}' has no member named 'setDataMode'
_spi->setDataMode(SPI_MODE3);
^~~~~~~~~~~
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ADXL345_WE/src/ADXL345_WE.cpp: In member function 'bool ADXL345_WE::init()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ADXL345_WE/src/ADXL345_WE.cpp:62:15: error: 'arduino::SPIClass {aka class arduino::HardwareSPI}' has no member named 'setDataMode'
_spi->setDataMode(SPI_MODE3);
^~~~~~~~~~~
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ADXL345_WE/src/ADXL345_WE.cpp: In member function 'bool ADXL345_WE::init()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ADXL345_WE/src/ADXL345_WE.cpp:62:15: error: 'arduino::SPIClass {aka class arduino::HardwareSPI}' has no member named 'setDataMode'
_spi->setDataMode(SPI_MODE3);
^~~~~~~~~~~
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ADXL345_WE/src/ADXL345_WE.cpp: In member function 'bool ADXL345_WE::init()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ADXL345_WE/src/ADXL345_WE.cpp:62:15: error: 'arduino::SPIClass {aka class arduino::HardwareSPI}' has no member named 'setDataMode'
_spi->setDataMode(SPI_MODE3);
^~~~~~~~~~~
Result: PASS
Sketch uses 204302 bytes (15%) of program storage space. Maximum is 1310720 bytes. Global variables use 13912 bytes (4%) of dynamic memory, leaving 313768 bytes for local variables. Maximum is 327680 bytes.
Result: PASS
Sketch uses 220110 bytes (16%) of program storage space. Maximum is 1310720 bytes. Global variables use 14328 bytes (4%) of dynamic memory, leaving 313352 bytes for local variables. Maximum is 327680 bytes.
Result: PASS
Sketch uses 221526 bytes (16%) of program storage space. Maximum is 1310720 bytes. Global variables use 14800 bytes (4%) of dynamic memory, leaving 312880 bytes for local variables. Maximum is 327680 bytes.
Result: PASS
Sketch uses 223614 bytes (17%) of program storage space. Maximum is 1310720 bytes. Global variables use 14328 bytes (4%) of dynamic memory, leaving 313352 bytes for local variables. Maximum is 327680 bytes.
Result: PASS
Sketch uses 221250 bytes (16%) of program storage space. Maximum is 1310720 bytes. Global variables use 14800 bytes (4%) of dynamic memory, leaving 312880 bytes for local variables. Maximum is 327680 bytes.
Result: PASS
Sketch uses 220226 bytes (16%) of program storage space. Maximum is 1310720 bytes. Global variables use 14312 bytes (4%) of dynamic memory, leaving 313368 bytes for local variables. Maximum is 327680 bytes.
Result: PASS
Sketch uses 219102 bytes (16%) of program storage space. Maximum is 1310720 bytes. Global variables use 14312 bytes (4%) of dynamic memory, leaving 313368 bytes for local variables. Maximum is 327680 bytes.
Result: PASS
Sketch uses 220454 bytes (16%) of program storage space. Maximum is 1310720 bytes. Global variables use 14800 bytes (4%) of dynamic memory, leaving 312880 bytes for local variables. Maximum is 327680 bytes.
Result: PASS
Sketch uses 221650 bytes (16%) of program storage space. Maximum is 1310720 bytes. Global variables use 14800 bytes (4%) of dynamic memory, leaving 312880 bytes for local variables. Maximum is 327680 bytes.
Result: PASS
Sketch uses 220930 bytes (16%) of program storage space. Maximum is 1310720 bytes. Global variables use 14800 bytes (4%) of dynamic memory, leaving 312880 bytes for local variables. Maximum is 327680 bytes.
Result: PASS
Sketch uses 221674 bytes (16%) of program storage space. Maximum is 1310720 bytes. Global variables use 14800 bytes (4%) of dynamic memory, leaving 312880 bytes for local variables. Maximum is 327680 bytes.
Result: PASS
Sketch uses 221670 bytes (16%) of program storage space. Maximum is 1310720 bytes. Global variables use 14800 bytes (4%) of dynamic memory, leaving 312880 bytes for local variables. Maximum is 327680 bytes.
Result: PASS
Sketch uses 221218 bytes (16%) of program storage space. Maximum is 1310720 bytes. Global variables use 14800 bytes (4%) of dynamic memory, leaving 312880 bytes for local variables. Maximum is 327680 bytes.
Result: PASS
Sketch uses 224434 bytes (17%) of program storage space. Maximum is 1310720 bytes. Global variables use 14328 bytes (4%) of dynamic memory, leaving 313352 bytes for local variables. Maximum is 327680 bytes.
Result: PASS
Sketch uses 221466 bytes (16%) of program storage space. Maximum is 1310720 bytes. Global variables use 14800 bytes (4%) of dynamic memory, leaving 312880 bytes for local variables. Maximum is 327680 bytes.
Result: PASS
Sketch uses 220178 bytes (16%) of program storage space. Maximum is 1310720 bytes. Global variables use 14312 bytes (4%) of dynamic memory, leaving 313368 bytes for local variables. Maximum is 327680 bytes.