ALLBOT - compatibility matrix

This report was generated on Wednesday, 23-Feb-22 22:48:15 CET using arduino-testlib.

ALLBOT

Version: 1.0.0
More details

Compatibility matrix

Board	Claims compatibility	Inclusion	VR408	VR408-LIGHTSENSOR	VR408-SOUNDSENSOR	VR408-TEMPSENSOR	VR412	VR612	VR618	VR204
arduino:avr:uno 1.8.4	Yes	PASS	PASS	PASS	PASS	PASS	PASS	PASS	PASS	PASS
arduino:mbed_nano:nanorp2040connect 2.7.2	Yes	PASS	PASS	FAIL	FAIL	FAIL	FAIL	PASS	PASS	PASS
arduino:megaavr:nona4809 1.8.7	Yes	PASS	PASS	PASS	PASS	PASS	PASS	PASS	PASS	PASS
arduino:samd:mkrwifi1010 1.8.12	Yes	PASS	PASS	PASS	PASS	PASS	PASS	PASS	PASS	PASS
esp32:esp32:d1_mini32 1.0.6	Yes	PASS	FAIL	FAIL	FAIL	FAIL	FAIL	FAIL	PASS	PASS

Compilation logs

arduino:avr:uno @ 1.8.4

Inclusion

Result: PASS

Sketch uses 888 bytes (2%) of program storage space. Maximum is 32256 bytes.
Global variables use 46 bytes (2%) of dynamic memory, leaving 2002 bytes for local variables. Maximum is 2048 bytes.

examples/VR204

Result: PASS

Sketch uses 9088 bytes (28%) of program storage space. Maximum is 32256 bytes.
Global variables use 264 bytes (12%) of dynamic memory, leaving 1784 bytes for local variables. Maximum is 2048 bytes.

examples/VR408

Result: PASS

Sketch uses 13126 bytes (40%) of program storage space. Maximum is 32256 bytes.
Global variables use 264 bytes (12%) of dynamic memory, leaving 1784 bytes for local variables. Maximum is 2048 bytes.

examples/VR408-LIGHTSENSOR

Result: PASS

Sketch uses 3192 bytes (9%) of program storage space. Maximum is 32256 bytes.
Global variables use 61 bytes (2%) of dynamic memory, leaving 1987 bytes for local variables. Maximum is 2048 bytes.

examples/VR408-SOUNDSENSOR

Result: PASS

Sketch uses 4592 bytes (14%) of program storage space. Maximum is 32256 bytes.
Global variables use 61 bytes (2%) of dynamic memory, leaving 1987 bytes for local variables. Maximum is 2048 bytes.

examples/VR408-TEMPSENSOR

Result: PASS

Sketch uses 3192 bytes (9%) of program storage space. Maximum is 32256 bytes.
Global variables use 61 bytes (2%) of dynamic memory, leaving 1987 bytes for local variables. Maximum is 2048 bytes.

examples/VR412

Result: PASS

Sketch uses 13556 bytes (42%) of program storage space. Maximum is 32256 bytes.
Global variables use 264 bytes (12%) of dynamic memory, leaving 1784 bytes for local variables. Maximum is 2048 bytes.

examples/VR612

Result: PASS

Sketch uses 14808 bytes (45%) of program storage space. Maximum is 32256 bytes.
Global variables use 264 bytes (12%) of dynamic memory, leaving 1784 bytes for local variables. Maximum is 2048 bytes.

examples/VR618

Result: PASS

Sketch uses 14528 bytes (45%) of program storage space. Maximum is 32256 bytes.
Global variables use 264 bytes (12%) of dynamic memory, leaving 1784 bytes for local variables. Maximum is 2048 bytes.

arduino:mbed_nano:nanorp2040connect @ 2.7.2

Inclusion

Result: PASS

Sketch uses 78756 bytes (0%) of program storage space. Maximum is 16777216 bytes.
Global variables use 43444 bytes (16%) of dynamic memory, leaving 226892 bytes for local variables. Maximum is 270336 bytes.

examples/VR204

Result: PASS

Sketch uses 87216 bytes (0%) of program storage space. Maximum is 16777216 bytes.
Global variables use 45108 bytes (16%) of dynamic memory, leaving 225228 bytes for local variables. Maximum is 270336 bytes.

examples/VR408

Result: PASS

Sketch uses 90352 bytes (0%) of program storage space. Maximum is 16777216 bytes.
Global variables use 45108 bytes (16%) of dynamic memory, leaving 225228 bytes for local variables. Maximum is 270336 bytes.

examples/VR408-LIGHTSENSOR

Result: FAIL

In function 'void __static_initialization_and_destruction_0(int, int)',
    inlined from '(static initializers for /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ALLBOT/examples/VR408-LIGHTSENSOR/VR408-LIGHTSENSOR.ino)' at /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ALLBOT/examples/VR408-LIGHTSENSOR/VR408-LIGHTSENSOR.ino:86:1:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ALLBOT/examples/VR408-LIGHTSENSOR/VR408-LIGHTSENSOR.ino:30:19: error: call to 'NinaPin::operator int' declared with attribute error: Change me to a #define
 int lightsensor = A5;                     // The lightsensor needs to be connected to the A5 servo port or A0 -> A5
                   ^~
Multiple libraries were found for "Servo.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Servo
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/evive
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/XMC_Servo
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Printoo_Library
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RokitSmart
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ServoESP32

examples/VR408-SOUNDSENSOR

Result: FAIL

In function 'void __static_initialization_and_destruction_0(int, int)',
    inlined from '(static initializers for /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ALLBOT/examples/VR408-SOUNDSENSOR/VR408-SOUNDSENSOR.ino)' at /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ALLBOT/examples/VR408-SOUNDSENSOR/VR408-SOUNDSENSOR.ino:109:1:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ALLBOT/examples/VR408-SOUNDSENSOR/VR408-SOUNDSENSOR.ino:30:19: error: call to 'NinaPin::operator int' declared with attribute error: Change me to a #define
 int soundsensor = A5;                     // The soundsensor needs to be connected to the A5 servo port or A0 -> A5
                   ^~
Multiple libraries were found for "Servo.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Servo
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/XMC_Servo
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/evive
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ServoESP32
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Printoo_Library
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RokitSmart

examples/VR408-TEMPSENSOR

Result: FAIL

In function 'void __static_initialization_and_destruction_0(int, int)',
    inlined from '(static initializers for /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ALLBOT/examples/VR408-TEMPSENSOR/VR408-TEMPSENSOR.ino)' at /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ALLBOT/examples/VR408-TEMPSENSOR/VR408-TEMPSENSOR.ino:86:1:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ALLBOT/examples/VR408-TEMPSENSOR/VR408-TEMPSENSOR.ino:30:18: error: call to 'NinaPin::operator int' declared with attribute error: Change me to a #define
 int tempsensor = A5;                     // The tempsensor needs to be connected to the A5 servo port or A0 -> A5
                  ^~
Multiple libraries were found for "Servo.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Servo
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Printoo_Library
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/evive
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/XMC_Servo
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ServoESP32
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RokitSmart

examples/VR412

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ALLBOT/examples/VR412/VR412.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ALLBOT/examples/VR412/VR412.ino:44:13: error: call to 'NinaPin::operator int' declared with attribute error: Change me to a #define
   BOT.attach(hipFrontLeft,   A5,  45, 0,  0);
   ~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ALLBOT/examples/VR412/VR412.ino:49:13: error: call to 'NinaPin::operator int' declared with attribute error: Change me to a #define
   BOT.attach(kneeFrontLeft,  A4,  10, 0,  0);
   ~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Multiple libraries were found for "Servo.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Servo
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Printoo_Library
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/XMC_Servo
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/evive
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RokitSmart
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ServoESP32

examples/VR612

Result: PASS

Sketch uses 91724 bytes (0%) of program storage space. Maximum is 16777216 bytes.
Global variables use 45108 bytes (16%) of dynamic memory, leaving 225228 bytes for local variables. Maximum is 270336 bytes.

examples/VR618

Result: PASS

Sketch uses 91200 bytes (0%) of program storage space. Maximum is 16777216 bytes.
Global variables use 45108 bytes (16%) of dynamic memory, leaving 225228 bytes for local variables. Maximum is 270336 bytes.

arduino:megaavr:nona4809 @ 1.8.7

Inclusion

Result: PASS

Sketch uses 1478 bytes (3%) of program storage space. Maximum is 49152 bytes.
Global variables use 59 bytes (0%) of dynamic memory, leaving 6085 bytes for local variables. Maximum is 6144 bytes.

examples/VR204

Result: PASS

Sketch uses 10187 bytes (20%) of program storage space. Maximum is 49152 bytes.
Global variables use 253 bytes (4%) of dynamic memory, leaving 5891 bytes for local variables. Maximum is 6144 bytes.

examples/VR408

Result: PASS

Sketch uses 14225 bytes (28%) of program storage space. Maximum is 49152 bytes.
Global variables use 253 bytes (4%) of dynamic memory, leaving 5891 bytes for local variables. Maximum is 6144 bytes.

examples/VR408-LIGHTSENSOR

Result: PASS

Sketch uses 3886 bytes (7%) of program storage space. Maximum is 49152 bytes.
Global variables use 74 bytes (1%) of dynamic memory, leaving 6070 bytes for local variables. Maximum is 6144 bytes.

examples/VR408-SOUNDSENSOR

Result: PASS

Sketch uses 5278 bytes (10%) of program storage space. Maximum is 49152 bytes.
Global variables use 74 bytes (1%) of dynamic memory, leaving 6070 bytes for local variables. Maximum is 6144 bytes.

examples/VR408-TEMPSENSOR

Result: PASS

Sketch uses 3886 bytes (7%) of program storage space. Maximum is 49152 bytes.
Global variables use 74 bytes (1%) of dynamic memory, leaving 6070 bytes for local variables. Maximum is 6144 bytes.

examples/VR412

Result: PASS

Sketch uses 14663 bytes (29%) of program storage space. Maximum is 49152 bytes.
Global variables use 253 bytes (4%) of dynamic memory, leaving 5891 bytes for local variables. Maximum is 6144 bytes.

examples/VR612

Result: PASS

Sketch uses 15907 bytes (32%) of program storage space. Maximum is 49152 bytes.
Global variables use 253 bytes (4%) of dynamic memory, leaving 5891 bytes for local variables. Maximum is 6144 bytes.

examples/VR618

Result: PASS

Sketch uses 15621 bytes (31%) of program storage space. Maximum is 49152 bytes.
Global variables use 253 bytes (4%) of dynamic memory, leaving 5891 bytes for local variables. Maximum is 6144 bytes.

arduino:samd:mkrwifi1010 @ 1.8.12

Inclusion

Result: PASS

Sketch uses 12464 bytes (4%) of program storage space. Maximum is 262144 bytes.
Global variables use 3096 bytes (9%) of dynamic memory, leaving 29672 bytes for local variables. Maximum is 32768 bytes.

examples/VR204

Result: PASS

Sketch uses 22780 bytes (8%) of program storage space. Maximum is 262144 bytes.
Global variables use 3520 bytes (10%) of dynamic memory, leaving 29248 bytes for local variables. Maximum is 32768 bytes.

examples/VR408

Result: PASS

Sketch uses 25952 bytes (9%) of program storage space. Maximum is 262144 bytes.
Global variables use 3520 bytes (10%) of dynamic memory, leaving 29248 bytes for local variables. Maximum is 32768 bytes.

examples/VR408-LIGHTSENSOR

Result: PASS

Sketch uses 14192 bytes (5%) of program storage space. Maximum is 262144 bytes.
Global variables use 3124 bytes (9%) of dynamic memory, leaving 29644 bytes for local variables. Maximum is 32768 bytes.

examples/VR408-SOUNDSENSOR

Result: PASS

Sketch uses 18080 bytes (6%) of program storage space. Maximum is 262144 bytes.
Global variables use 3124 bytes (9%) of dynamic memory, leaving 29644 bytes for local variables. Maximum is 32768 bytes.

examples/VR408-TEMPSENSOR

Result: PASS

Sketch uses 14192 bytes (5%) of program storage space. Maximum is 262144 bytes.
Global variables use 3124 bytes (9%) of dynamic memory, leaving 29644 bytes for local variables. Maximum is 32768 bytes.

examples/VR412

Result: PASS

Sketch uses 26288 bytes (10%) of program storage space. Maximum is 262144 bytes.
Global variables use 3520 bytes (10%) of dynamic memory, leaving 29248 bytes for local variables. Maximum is 32768 bytes.

examples/VR612

Result: PASS

Sketch uses 27312 bytes (10%) of program storage space. Maximum is 262144 bytes.
Global variables use 3520 bytes (10%) of dynamic memory, leaving 29248 bytes for local variables. Maximum is 32768 bytes.

examples/VR618

Result: PASS

Sketch uses 26788 bytes (10%) of program storage space. Maximum is 262144 bytes.
Global variables use 3520 bytes (10%) of dynamic memory, leaving 29248 bytes for local variables. Maximum is 32768 bytes.

esp32:esp32:d1_mini32 @ 1.0.6

Inclusion

Result: PASS

Sketch uses 198694 bytes (15%) of program storage space. Maximum is 1310720 bytes.
Global variables use 13120 bytes (4%) of dynamic memory, leaving 314560 bytes for local variables. Maximum is 327680 bytes.

examples/VR204

Result: PASS

Sketch uses 228726 bytes (17%) of program storage space. Maximum is 1310720 bytes.
Global variables use 13536 bytes (4%) of dynamic memory, leaving 314144 bytes for local variables. Maximum is 327680 bytes.

examples/VR408

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ALLBOT/examples/VR408/VR408.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ALLBOT/examples/VR408/VR408.ino:40:30: error: 'A1' was not declared in this scope
   BOT.attach(hipFrontLeft,   A1,  45, 0, 0);
                              ^
Multiple libraries were found for "Servo.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ServoESP32
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Printoo_Library
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/XMC_Servo
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RokitSmart
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/evive
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Servo

examples/VR408-LIGHTSENSOR

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ALLBOT/examples/VR408-LIGHTSENSOR/VR408-LIGHTSENSOR.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ALLBOT/examples/VR408-LIGHTSENSOR/VR408-LIGHTSENSOR.ino:39:30: error: 'A1' was not declared in this scope
   BOT.attach(hipFrontLeft,   A1,  45, 0, 0);
                              ^
Multiple libraries were found for "Servo.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ServoESP32
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Printoo_Library
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Servo
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/XMC_Servo
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RokitSmart
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/evive

examples/VR408-SOUNDSENSOR

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ALLBOT/examples/VR408-SOUNDSENSOR/VR408-SOUNDSENSOR.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ALLBOT/examples/VR408-SOUNDSENSOR/VR408-SOUNDSENSOR.ino:39:30: error: 'A1' was not declared in this scope
   BOT.attach(hipFrontLeft,   A1,  45, 0, 0);
                              ^
Multiple libraries were found for "Servo.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ServoESP32
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/XMC_Servo
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RokitSmart
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Printoo_Library
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Servo
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/evive

examples/VR408-TEMPSENSOR

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ALLBOT/examples/VR408-TEMPSENSOR/VR408-TEMPSENSOR.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ALLBOT/examples/VR408-TEMPSENSOR/VR408-TEMPSENSOR.ino:39:30: error: 'A1' was not declared in this scope
   BOT.attach(hipFrontLeft,   A1,  45, 0, 0);
                              ^
Multiple libraries were found for "Servo.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ServoESP32
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RokitSmart
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Printoo_Library
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/XMC_Servo
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/evive
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Servo

examples/VR412

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ALLBOT/examples/VR412/VR412.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ALLBOT/examples/VR412/VR412.ino:45:30: error: 'A2' was not declared in this scope
   BOT.attach(hipFrontRight,  A2,  45, 1,  0);
                              ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ALLBOT/examples/VR412/VR412.ino:50:30: error: 'A1' was not declared in this scope
   BOT.attach(kneeFrontRight, A1,  10, 1,  0);
                              ^
Multiple libraries were found for "Servo.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ServoESP32
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RokitSmart
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/evive
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Servo
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Printoo_Library
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/XMC_Servo

examples/VR612

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ALLBOT/examples/VR612/VR612.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ALLBOT/examples/VR612/VR612.ino:44:31: error: 'A1' was not declared in this scope
   BOT.attach(hipFrontLeft,    A1,  45, 0,  0);
                               ^
Multiple libraries were found for "Servo.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ServoESP32
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RokitSmart
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Servo
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/XMC_Servo
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/evive
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Printoo_Library

examples/VR618

Result: PASS

Sketch uses 232778 bytes (17%) of program storage space. Maximum is 1310720 bytes.
Global variables use 13536 bytes (4%) of dynamic memory, leaving 314144 bytes for local variables. Maximum is 327680 bytes.