This report was generated on Wednesday, 23-Feb-22 22:48:15 CET using arduino-testlib.
Version: 1.2.0
More details
| Board | Claims compatibility | Inclusion | BicycleSpeedDisplay |
DeviceSearch |
EnvironmentDisplay |
FecBikeTrainerDisplay |
LEVDisplay |
MuscleOxygenMonitor |
BicyclePowerDisplay |
BicyclePowerSensor |
DynamicProfiles |
HeartRateDisplay |
HeartRateMonitor |
ShiftingShifter |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
arduino:avr:uno
1.8.4 |
Yes | PASS | FAIL | FAIL | FAIL | FAIL | FAIL | FAIL | FAIL | FAIL | FAIL | FAIL | FAIL | FAIL |
|
arduino:mbed_nano:nanorp2040connect
2.7.2 |
Yes ⚠️ | FAIL | FAIL | FAIL | FAIL | FAIL | FAIL | FAIL | FAIL | FAIL | FAIL | FAIL | FAIL | FAIL |
|
arduino:megaavr:nona4809
1.8.7 |
Yes | PASS | PASS | PASS | PASS | PASS | FAIL | FAIL | FAIL | FAIL | PASS | PASS | PASS | PASS |
|
arduino:samd:mkrwifi1010
1.8.12 |
Yes | PASS | PASS | PASS | PASS | PASS | PASS | PASS | PASS | PASS | PASS | PASS | PASS | PASS |
|
esp32:esp32:d1_mini32
1.0.6 |
Yes | PASS | PASS | PASS | PASS | PASS | PASS | PASS | PASS | PASS | PASS | PASS | PASS | PASS |
Result: PASS
This library has no main header file so an empty one was created.
Sketch uses 1332 bytes (4%) of program storage space. Maximum is 32256 bytes. Global variables use 184 bytes (8%) of dynamic memory, leaving 1864 bytes for local variables. Maximum is 2048 bytes.
Result: FAIL
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/ANTPLUS-Arduino/examples/BicyclePowerDisplay/BicyclePowerDisplay.ino: In function 'void setup()':
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/ANTPLUS-Arduino/examples/BicyclePowerDisplay/BicyclePowerDisplay.ino:21:19: error: 'Serial2' was not declared in this scope
#define antSerial Serial2
^
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/ANTPLUS-Arduino/examples/BicyclePowerDisplay/BicyclePowerDisplay.ino:68:5: note: in expansion of macro 'antSerial'
antSerial.begin(BAUD_RATE);
^~~~~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/ANTPLUS-Arduino/examples/BicyclePowerDisplay/BicyclePowerDisplay.ino:21:19: note: suggested alternative: 'Serial'
#define antSerial Serial2
^
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/ANTPLUS-Arduino/examples/BicyclePowerDisplay/BicyclePowerDisplay.ino:68:5: note: in expansion of macro 'antSerial'
antSerial.begin(BAUD_RATE);
^~~~~~~~~
Result: FAIL
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/ANTPLUS-Arduino/examples/BicyclePowerSensor/BicyclePowerSensor.ino: In function 'void setup()':
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/ANTPLUS-Arduino/examples/BicyclePowerSensor/BicyclePowerSensor.ino:18:19: error: 'Serial2' was not declared in this scope
#define antSerial Serial2
^
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/ANTPLUS-Arduino/examples/BicyclePowerSensor/BicyclePowerSensor.ino:60:5: note: in expansion of macro 'antSerial'
antSerial.begin(BAUD_RATE);
^~~~~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/ANTPLUS-Arduino/examples/BicyclePowerSensor/BicyclePowerSensor.ino:18:19: note: suggested alternative: 'Serial'
#define antSerial Serial2
^
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/ANTPLUS-Arduino/examples/BicyclePowerSensor/BicyclePowerSensor.ino:60:5: note: in expansion of macro 'antSerial'
antSerial.begin(BAUD_RATE);
^~~~~~~~~
Result: FAIL
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/ANTPLUS-Arduino/examples/BicycleSpeedDisplay/BicycleSpeedDisplay.ino: In function 'void setup()':
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/ANTPLUS-Arduino/examples/BicycleSpeedDisplay/BicycleSpeedDisplay.ino:36:5: error: 'Serial1' was not declared in this scope
Serial1.begin(BAUD_RATE);
^~~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/ANTPLUS-Arduino/examples/BicycleSpeedDisplay/BicycleSpeedDisplay.ino:36:5: note: suggested alternative: 'Serial'
Serial1.begin(BAUD_RATE);
^~~~~~~
Serial
Result: FAIL
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/ANTPLUS-Arduino/examples/DeviceSearch/DeviceSearch.ino: In function 'void setup()':
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/ANTPLUS-Arduino/examples/DeviceSearch/DeviceSearch.ino:30:5: error: 'Serial1' was not declared in this scope
Serial1.begin(BAUD_RATE);
^~~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/ANTPLUS-Arduino/examples/DeviceSearch/DeviceSearch.ino:30:5: note: suggested alternative: 'Serial'
Serial1.begin(BAUD_RATE);
^~~~~~~
Serial
Result: FAIL
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/ANTPLUS-Arduino/examples/DynamicProfiles/DynamicProfiles.ino: In function 'void setup()':
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/ANTPLUS-Arduino/examples/DynamicProfiles/DynamicProfiles.ino:58:5: error: 'Serial1' was not declared in this scope
Serial1.begin(BAUD_RATE);
^~~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/ANTPLUS-Arduino/examples/DynamicProfiles/DynamicProfiles.ino:58:5: note: suggested alternative: 'Serial'
Serial1.begin(BAUD_RATE);
^~~~~~~
Serial
Result: FAIL
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/ANTPLUS-Arduino/examples/EnvironmentDisplay/EnvironmentDisplay.ino: In function 'void setup()':
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/ANTPLUS-Arduino/examples/EnvironmentDisplay/EnvironmentDisplay.ino:32:5: error: 'Serial1' was not declared in this scope
Serial1.begin(BAUD_RATE);
^~~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/ANTPLUS-Arduino/examples/EnvironmentDisplay/EnvironmentDisplay.ino:32:5: note: suggested alternative: 'Serial'
Serial1.begin(BAUD_RATE);
^~~~~~~
Serial
Result: FAIL
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/ANTPLUS-Arduino/examples/FecBikeTrainerDisplay/FecBikeTrainerDisplay.ino: In function 'void setup()':
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/ANTPLUS-Arduino/examples/FecBikeTrainerDisplay/FecBikeTrainerDisplay.ino:38:5: error: 'Serial1' was not declared in this scope
Serial1.begin(BAUD_RATE);
^~~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/ANTPLUS-Arduino/examples/FecBikeTrainerDisplay/FecBikeTrainerDisplay.ino:38:5: note: suggested alternative: 'Serial'
Serial1.begin(BAUD_RATE);
^~~~~~~
Serial
Result: FAIL
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/ANTPLUS-Arduino/examples/HeartRateDisplay/HeartRateDisplay.ino: In function 'void setup()':
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/ANTPLUS-Arduino/examples/HeartRateDisplay/HeartRateDisplay.ino:37:5: error: 'Serial1' was not declared in this scope
Serial1.begin(BAUD_RATE);
^~~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/ANTPLUS-Arduino/examples/HeartRateDisplay/HeartRateDisplay.ino:37:5: note: suggested alternative: 'Serial'
Serial1.begin(BAUD_RATE);
^~~~~~~
Serial
Result: FAIL
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/ANTPLUS-Arduino/examples/HeartRateMonitor/HeartRateMonitor.ino: In function 'void setup()':
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/ANTPLUS-Arduino/examples/HeartRateMonitor/HeartRateMonitor.ino:44:5: error: 'Serial1' was not declared in this scope
Serial1.begin(BAUD_RATE);
^~~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/ANTPLUS-Arduino/examples/HeartRateMonitor/HeartRateMonitor.ino:44:5: note: suggested alternative: 'Serial'
Serial1.begin(BAUD_RATE);
^~~~~~~
Serial
Result: FAIL
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/ANTPLUS-Arduino/examples/LEVDisplay/LEVDisplay.ino: In function 'void setup()':
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/ANTPLUS-Arduino/examples/LEVDisplay/LEVDisplay.ino:46:5: error: 'Serial2' was not declared in this scope
Serial2.begin(BAUD_RATE);
^~~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/ANTPLUS-Arduino/examples/LEVDisplay/LEVDisplay.ino:46:5: note: suggested alternative: 'Serial'
Serial2.begin(BAUD_RATE);
^~~~~~~
Serial
Result: FAIL
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/ANTPLUS-Arduino/examples/MuscleOxygenMonitor/MuscleOxygenMonitor.ino: In function 'void setup()':
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/ANTPLUS-Arduino/examples/MuscleOxygenMonitor/MuscleOxygenMonitor.ino:28:5: error: 'Serial2' was not declared in this scope
Serial2.begin(BAUD_RATE);
^~~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/ANTPLUS-Arduino/examples/MuscleOxygenMonitor/MuscleOxygenMonitor.ino:28:5: note: suggested alternative: 'Serial'
Serial2.begin(BAUD_RATE);
^~~~~~~
Serial
Result: FAIL
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/ANTPLUS-Arduino/examples/ShiftingShifter/ShiftingShifter.ino: In function 'void setup()':
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/ANTPLUS-Arduino/examples/ShiftingShifter/ShiftingShifter.ino:29:5: error: 'Serial1' was not declared in this scope
Serial1.begin(BAUD_RATE);
^~~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/ANTPLUS-Arduino/examples/ShiftingShifter/ShiftingShifter.ino:29:5: note: suggested alternative: 'Serial'
Serial1.begin(BAUD_RATE);
^~~~~~~
Serial
Result: FAIL
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ANT-Arduino/src/ANT.h:31:0,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ANTPLUS-Arduino/src/BaseClasses/ANTPLUS_BaseProfile.h:5,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ANTPLUS-Arduino/src/MainClasses/ANTPLUS_AntPlusRouter.h:5,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ANTPLUS-Arduino/src/ANTPLUS.h:5,
from /tmp/arduino-testlib1436546859/test/test.ino:1:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ANT-Arduino/src/MainClasses/ANT_MbedSerialAnt.h:8:44: error: 'UARTSerial' was not declared in this scope
class MbedSerialAnt : public BaseSerialAnt<UARTSerial> {
^~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ANT-Arduino/src/MainClasses/ANT_MbedSerialAnt.h:8:44: note: suggested alternative: 'Serial'
class MbedSerialAnt : public BaseSerialAnt<UARTSerial> {
^~~~~~~~~~
Serial
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ANT-Arduino/src/MainClasses/ANT_MbedSerialAnt.h:8:54: error: template argument 1 is invalid
class MbedSerialAnt : public BaseSerialAnt<UARTSerial> {
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ANT-Arduino/src/MainClasses/ANT_MbedSerialAnt.h:11:20: error: 'UARTSerial' has not been declared
void setSerial(UARTSerial &serial) override;
^~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ANT-Arduino/src/MainClasses/ANT_MbedSerialAnt.h:17:5: error: 'UARTSerial' does not name a type; did you mean 'Serial'?
UARTSerial* _serial;
^~~~~~~~~~
Serial
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ANT-Arduino/src/MainClasses/ANT_MbedSerialAnt.h:11:10: error: 'void MbedSerialAnt::setSerial(int&)' marked 'override', but does not override
void setSerial(UARTSerial &serial) override;
^~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ANT-Arduino/src/MainClasses/ANT_MbedSerialAnt.h:13:13: error: 'uint8_t MbedSerialAnt::available()' marked 'override', but does not override
uint8_t available() override;
^~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ANT-Arduino/src/MainClasses/ANT_MbedSerialAnt.h:14:13: error: 'uint8_t MbedSerialAnt::read()' marked 'override', but does not override
uint8_t read() override;
^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ANT-Arduino/src/MainClasses/ANT_MbedSerialAnt.h:15:10: error: 'void MbedSerialAnt::write(uint8_t*, uint8_t)' marked 'override', but does not override
void write(uint8_t *buf, uint8_t len) override;
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ANT-Arduino/src/MainClasses/ANT_MbedSerialAnt.h:16:14: error: 'uint32_t MbedSerialAnt::getMs()' marked 'override', but does not override
uint32_t getMs() override;
^~~~~
Result: FAIL
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ANT-Arduino/src/ANT.h:31:0,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ANTPLUS-Arduino/examples/BicyclePowerDisplay/BicyclePowerDisplay.ino:15:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ANT-Arduino/src/MainClasses/ANT_MbedSerialAnt.h:8:44: error: 'UARTSerial' was not declared in this scope
class MbedSerialAnt : public BaseSerialAnt<UARTSerial> {
^~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ANT-Arduino/src/MainClasses/ANT_MbedSerialAnt.h:8:44: note: suggested alternative: 'Serial'
class MbedSerialAnt : public BaseSerialAnt<UARTSerial> {
^~~~~~~~~~
Serial
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ANT-Arduino/src/MainClasses/ANT_MbedSerialAnt.h:8:54: error: template argument 1 is invalid
class MbedSerialAnt : public BaseSerialAnt<UARTSerial> {
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ANT-Arduino/src/MainClasses/ANT_MbedSerialAnt.h:11:20: error: 'UARTSerial' has not been declared
void setSerial(UARTSerial &serial) override;
^~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ANT-Arduino/src/MainClasses/ANT_MbedSerialAnt.h:17:5: error: 'UARTSerial' does not name a type; did you mean 'Serial'?
UARTSerial* _serial;
^~~~~~~~~~
Serial
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ANT-Arduino/src/MainClasses/ANT_MbedSerialAnt.h:11:10: error: 'void MbedSerialAnt::setSerial(int&)' marked 'override', but does not override
void setSerial(UARTSerial &serial) override;
^~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ANT-Arduino/src/MainClasses/ANT_MbedSerialAnt.h:13:13: error: 'uint8_t MbedSerialAnt::available()' marked 'override', but does not override
uint8_t available() override;
^~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ANT-Arduino/src/MainClasses/ANT_MbedSerialAnt.h:14:13: error: 'uint8_t MbedSerialAnt::read()' marked 'override', but does not override
uint8_t read() override;
^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ANT-Arduino/src/MainClasses/ANT_MbedSerialAnt.h:15:10: error: 'void MbedSerialAnt::write(uint8_t*, uint8_t)' marked 'override', but does not override
void write(uint8_t *buf, uint8_t len) override;
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ANT-Arduino/src/MainClasses/ANT_MbedSerialAnt.h:16:14: error: 'uint32_t MbedSerialAnt::getMs()' marked 'override', but does not override
uint32_t getMs() override;
^~~~~
Result: FAIL
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ANT-Arduino/src/ANT.h:31:0,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ANTPLUS-Arduino/examples/BicyclePowerSensor/BicyclePowerSensor.ino:13:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ANT-Arduino/src/MainClasses/ANT_MbedSerialAnt.h:8:44: error: 'UARTSerial' was not declared in this scope
class MbedSerialAnt : public BaseSerialAnt<UARTSerial> {
^~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ANT-Arduino/src/MainClasses/ANT_MbedSerialAnt.h:8:44: note: suggested alternative: 'Serial'
class MbedSerialAnt : public BaseSerialAnt<UARTSerial> {
^~~~~~~~~~
Serial
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ANT-Arduino/src/MainClasses/ANT_MbedSerialAnt.h:8:54: error: template argument 1 is invalid
class MbedSerialAnt : public BaseSerialAnt<UARTSerial> {
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ANT-Arduino/src/MainClasses/ANT_MbedSerialAnt.h:11:20: error: 'UARTSerial' has not been declared
void setSerial(UARTSerial &serial) override;
^~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ANT-Arduino/src/MainClasses/ANT_MbedSerialAnt.h:17:5: error: 'UARTSerial' does not name a type; did you mean 'Serial'?
UARTSerial* _serial;
^~~~~~~~~~
Serial
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ANT-Arduino/src/MainClasses/ANT_MbedSerialAnt.h:11:10: error: 'void MbedSerialAnt::setSerial(int&)' marked 'override', but does not override
void setSerial(UARTSerial &serial) override;
^~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ANT-Arduino/src/MainClasses/ANT_MbedSerialAnt.h:13:13: error: 'uint8_t MbedSerialAnt::available()' marked 'override', but does not override
uint8_t available() override;
^~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ANT-Arduino/src/MainClasses/ANT_MbedSerialAnt.h:14:13: error: 'uint8_t MbedSerialAnt::read()' marked 'override', but does not override
uint8_t read() override;
^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ANT-Arduino/src/MainClasses/ANT_MbedSerialAnt.h:15:10: error: 'void MbedSerialAnt::write(uint8_t*, uint8_t)' marked 'override', but does not override
void write(uint8_t *buf, uint8_t len) override;
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ANT-Arduino/src/MainClasses/ANT_MbedSerialAnt.h:16:14: error: 'uint32_t MbedSerialAnt::getMs()' marked 'override', but does not override
uint32_t getMs() override;
^~~~~
Result: FAIL
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ANT-Arduino/src/ANT.h:31:0,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ANTPLUS-Arduino/examples/BicycleSpeedDisplay/BicycleSpeedDisplay.ino:11:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ANT-Arduino/src/MainClasses/ANT_MbedSerialAnt.h:8:44: error: 'UARTSerial' was not declared in this scope
class MbedSerialAnt : public BaseSerialAnt<UARTSerial> {
^~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ANT-Arduino/src/MainClasses/ANT_MbedSerialAnt.h:8:44: note: suggested alternative: 'Serial'
class MbedSerialAnt : public BaseSerialAnt<UARTSerial> {
^~~~~~~~~~
Serial
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ANT-Arduino/src/MainClasses/ANT_MbedSerialAnt.h:8:54: error: template argument 1 is invalid
class MbedSerialAnt : public BaseSerialAnt<UARTSerial> {
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ANT-Arduino/src/MainClasses/ANT_MbedSerialAnt.h:11:20: error: 'UARTSerial' has not been declared
void setSerial(UARTSerial &serial) override;
^~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ANT-Arduino/src/MainClasses/ANT_MbedSerialAnt.h:17:5: error: 'UARTSerial' does not name a type; did you mean 'Serial'?
UARTSerial* _serial;
^~~~~~~~~~
Serial
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ANT-Arduino/src/MainClasses/ANT_MbedSerialAnt.h:11:10: error: 'void MbedSerialAnt::setSerial(int&)' marked 'override', but does not override
void setSerial(UARTSerial &serial) override;
^~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ANT-Arduino/src/MainClasses/ANT_MbedSerialAnt.h:13:13: error: 'uint8_t MbedSerialAnt::available()' marked 'override', but does not override
uint8_t available() override;
^~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ANT-Arduino/src/MainClasses/ANT_MbedSerialAnt.h:14:13: error: 'uint8_t MbedSerialAnt::read()' marked 'override', but does not override
uint8_t read() override;
^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ANT-Arduino/src/MainClasses/ANT_MbedSerialAnt.h:15:10: error: 'void MbedSerialAnt::write(uint8_t*, uint8_t)' marked 'override', but does not override
void write(uint8_t *buf, uint8_t len) override;
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ANT-Arduino/src/MainClasses/ANT_MbedSerialAnt.h:16:14: error: 'uint32_t MbedSerialAnt::getMs()' marked 'override', but does not override
uint32_t getMs() override;
^~~~~
Result: FAIL
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ANT-Arduino/src/ANT.h:31:0,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ANTPLUS-Arduino/examples/DeviceSearch/DeviceSearch.ino:10:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ANT-Arduino/src/MainClasses/ANT_MbedSerialAnt.h:8:44: error: 'UARTSerial' was not declared in this scope
class MbedSerialAnt : public BaseSerialAnt<UARTSerial> {
^~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ANT-Arduino/src/MainClasses/ANT_MbedSerialAnt.h:8:44: note: suggested alternative: 'Serial'
class MbedSerialAnt : public BaseSerialAnt<UARTSerial> {
^~~~~~~~~~
Serial
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ANT-Arduino/src/MainClasses/ANT_MbedSerialAnt.h:8:54: error: template argument 1 is invalid
class MbedSerialAnt : public BaseSerialAnt<UARTSerial> {
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ANT-Arduino/src/MainClasses/ANT_MbedSerialAnt.h:11:20: error: 'UARTSerial' has not been declared
void setSerial(UARTSerial &serial) override;
^~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ANT-Arduino/src/MainClasses/ANT_MbedSerialAnt.h:17:5: error: 'UARTSerial' does not name a type; did you mean 'Serial'?
UARTSerial* _serial;
^~~~~~~~~~
Serial
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ANT-Arduino/src/MainClasses/ANT_MbedSerialAnt.h:11:10: error: 'void MbedSerialAnt::setSerial(int&)' marked 'override', but does not override
void setSerial(UARTSerial &serial) override;
^~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ANT-Arduino/src/MainClasses/ANT_MbedSerialAnt.h:13:13: error: 'uint8_t MbedSerialAnt::available()' marked 'override', but does not override
uint8_t available() override;
^~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ANT-Arduino/src/MainClasses/ANT_MbedSerialAnt.h:14:13: error: 'uint8_t MbedSerialAnt::read()' marked 'override', but does not override
uint8_t read() override;
^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ANT-Arduino/src/MainClasses/ANT_MbedSerialAnt.h:15:10: error: 'void MbedSerialAnt::write(uint8_t*, uint8_t)' marked 'override', but does not override
void write(uint8_t *buf, uint8_t len) override;
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ANT-Arduino/src/MainClasses/ANT_MbedSerialAnt.h:16:14: error: 'uint32_t MbedSerialAnt::getMs()' marked 'override', but does not override
uint32_t getMs() override;
^~~~~
Result: FAIL
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ANT-Arduino/src/ANT.h:31:0,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ANTPLUS-Arduino/examples/DynamicProfiles/DynamicProfiles.ino:13:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ANT-Arduino/src/MainClasses/ANT_MbedSerialAnt.h:8:44: error: 'UARTSerial' was not declared in this scope
class MbedSerialAnt : public BaseSerialAnt<UARTSerial> {
^~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ANT-Arduino/src/MainClasses/ANT_MbedSerialAnt.h:8:44: note: suggested alternative: 'Serial'
class MbedSerialAnt : public BaseSerialAnt<UARTSerial> {
^~~~~~~~~~
Serial
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ANT-Arduino/src/MainClasses/ANT_MbedSerialAnt.h:8:54: error: template argument 1 is invalid
class MbedSerialAnt : public BaseSerialAnt<UARTSerial> {
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ANT-Arduino/src/MainClasses/ANT_MbedSerialAnt.h:11:20: error: 'UARTSerial' has not been declared
void setSerial(UARTSerial &serial) override;
^~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ANT-Arduino/src/MainClasses/ANT_MbedSerialAnt.h:17:5: error: 'UARTSerial' does not name a type; did you mean 'Serial'?
UARTSerial* _serial;
^~~~~~~~~~
Serial
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ANT-Arduino/src/MainClasses/ANT_MbedSerialAnt.h:11:10: error: 'void MbedSerialAnt::setSerial(int&)' marked 'override', but does not override
void setSerial(UARTSerial &serial) override;
^~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ANT-Arduino/src/MainClasses/ANT_MbedSerialAnt.h:13:13: error: 'uint8_t MbedSerialAnt::available()' marked 'override', but does not override
uint8_t available() override;
^~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ANT-Arduino/src/MainClasses/ANT_MbedSerialAnt.h:14:13: error: 'uint8_t MbedSerialAnt::read()' marked 'override', but does not override
uint8_t read() override;
^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ANT-Arduino/src/MainClasses/ANT_MbedSerialAnt.h:15:10: error: 'void MbedSerialAnt::write(uint8_t*, uint8_t)' marked 'override', but does not override
void write(uint8_t *buf, uint8_t len) override;
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ANT-Arduino/src/MainClasses/ANT_MbedSerialAnt.h:16:14: error: 'uint32_t MbedSerialAnt::getMs()' marked 'override', but does not override
uint32_t getMs() override;
^~~~~
Result: FAIL
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ANT-Arduino/src/ANT.h:31:0,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ANTPLUS-Arduino/examples/EnvironmentDisplay/EnvironmentDisplay.ino:11:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ANT-Arduino/src/MainClasses/ANT_MbedSerialAnt.h:8:44: error: 'UARTSerial' was not declared in this scope
class MbedSerialAnt : public BaseSerialAnt<UARTSerial> {
^~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ANT-Arduino/src/MainClasses/ANT_MbedSerialAnt.h:8:44: note: suggested alternative: 'Serial'
class MbedSerialAnt : public BaseSerialAnt<UARTSerial> {
^~~~~~~~~~
Serial
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ANT-Arduino/src/MainClasses/ANT_MbedSerialAnt.h:8:54: error: template argument 1 is invalid
class MbedSerialAnt : public BaseSerialAnt<UARTSerial> {
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ANT-Arduino/src/MainClasses/ANT_MbedSerialAnt.h:11:20: error: 'UARTSerial' has not been declared
void setSerial(UARTSerial &serial) override;
^~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ANT-Arduino/src/MainClasses/ANT_MbedSerialAnt.h:17:5: error: 'UARTSerial' does not name a type; did you mean 'Serial'?
UARTSerial* _serial;
^~~~~~~~~~
Serial
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ANT-Arduino/src/MainClasses/ANT_MbedSerialAnt.h:11:10: error: 'void MbedSerialAnt::setSerial(int&)' marked 'override', but does not override
void setSerial(UARTSerial &serial) override;
^~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ANT-Arduino/src/MainClasses/ANT_MbedSerialAnt.h:13:13: error: 'uint8_t MbedSerialAnt::available()' marked 'override', but does not override
uint8_t available() override;
^~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ANT-Arduino/src/MainClasses/ANT_MbedSerialAnt.h:14:13: error: 'uint8_t MbedSerialAnt::read()' marked 'override', but does not override
uint8_t read() override;
^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ANT-Arduino/src/MainClasses/ANT_MbedSerialAnt.h:15:10: error: 'void MbedSerialAnt::write(uint8_t*, uint8_t)' marked 'override', but does not override
void write(uint8_t *buf, uint8_t len) override;
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ANT-Arduino/src/MainClasses/ANT_MbedSerialAnt.h:16:14: error: 'uint32_t MbedSerialAnt::getMs()' marked 'override', but does not override
uint32_t getMs() override;
^~~~~
Result: FAIL
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ANT-Arduino/src/ANT.h:31:0,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ANTPLUS-Arduino/examples/FecBikeTrainerDisplay/FecBikeTrainerDisplay.ino:11:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ANT-Arduino/src/MainClasses/ANT_MbedSerialAnt.h:8:44: error: 'UARTSerial' was not declared in this scope
class MbedSerialAnt : public BaseSerialAnt<UARTSerial> {
^~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ANT-Arduino/src/MainClasses/ANT_MbedSerialAnt.h:8:44: note: suggested alternative: 'Serial'
class MbedSerialAnt : public BaseSerialAnt<UARTSerial> {
^~~~~~~~~~
Serial
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ANT-Arduino/src/MainClasses/ANT_MbedSerialAnt.h:8:54: error: template argument 1 is invalid
class MbedSerialAnt : public BaseSerialAnt<UARTSerial> {
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ANT-Arduino/src/MainClasses/ANT_MbedSerialAnt.h:11:20: error: 'UARTSerial' has not been declared
void setSerial(UARTSerial &serial) override;
^~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ANT-Arduino/src/MainClasses/ANT_MbedSerialAnt.h:17:5: error: 'UARTSerial' does not name a type; did you mean 'Serial'?
UARTSerial* _serial;
^~~~~~~~~~
Serial
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ANT-Arduino/src/MainClasses/ANT_MbedSerialAnt.h:11:10: error: 'void MbedSerialAnt::setSerial(int&)' marked 'override', but does not override
void setSerial(UARTSerial &serial) override;
^~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ANT-Arduino/src/MainClasses/ANT_MbedSerialAnt.h:13:13: error: 'uint8_t MbedSerialAnt::available()' marked 'override', but does not override
uint8_t available() override;
^~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ANT-Arduino/src/MainClasses/ANT_MbedSerialAnt.h:14:13: error: 'uint8_t MbedSerialAnt::read()' marked 'override', but does not override
uint8_t read() override;
^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ANT-Arduino/src/MainClasses/ANT_MbedSerialAnt.h:15:10: error: 'void MbedSerialAnt::write(uint8_t*, uint8_t)' marked 'override', but does not override
void write(uint8_t *buf, uint8_t len) override;
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ANT-Arduino/src/MainClasses/ANT_MbedSerialAnt.h:16:14: error: 'uint32_t MbedSerialAnt::getMs()' marked 'override', but does not override
uint32_t getMs() override;
^~~~~
Result: FAIL
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ANT-Arduino/src/ANT.h:31:0,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ANTPLUS-Arduino/examples/HeartRateDisplay/HeartRateDisplay.ino:11:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ANT-Arduino/src/MainClasses/ANT_MbedSerialAnt.h:8:44: error: 'UARTSerial' was not declared in this scope
class MbedSerialAnt : public BaseSerialAnt<UARTSerial> {
^~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ANT-Arduino/src/MainClasses/ANT_MbedSerialAnt.h:8:44: note: suggested alternative: 'Serial'
class MbedSerialAnt : public BaseSerialAnt<UARTSerial> {
^~~~~~~~~~
Serial
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ANT-Arduino/src/MainClasses/ANT_MbedSerialAnt.h:8:54: error: template argument 1 is invalid
class MbedSerialAnt : public BaseSerialAnt<UARTSerial> {
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ANT-Arduino/src/MainClasses/ANT_MbedSerialAnt.h:11:20: error: 'UARTSerial' has not been declared
void setSerial(UARTSerial &serial) override;
^~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ANT-Arduino/src/MainClasses/ANT_MbedSerialAnt.h:17:5: error: 'UARTSerial' does not name a type; did you mean 'Serial'?
UARTSerial* _serial;
^~~~~~~~~~
Serial
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ANT-Arduino/src/MainClasses/ANT_MbedSerialAnt.h:11:10: error: 'void MbedSerialAnt::setSerial(int&)' marked 'override', but does not override
void setSerial(UARTSerial &serial) override;
^~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ANT-Arduino/src/MainClasses/ANT_MbedSerialAnt.h:13:13: error: 'uint8_t MbedSerialAnt::available()' marked 'override', but does not override
uint8_t available() override;
^~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ANT-Arduino/src/MainClasses/ANT_MbedSerialAnt.h:14:13: error: 'uint8_t MbedSerialAnt::read()' marked 'override', but does not override
uint8_t read() override;
^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ANT-Arduino/src/MainClasses/ANT_MbedSerialAnt.h:15:10: error: 'void MbedSerialAnt::write(uint8_t*, uint8_t)' marked 'override', but does not override
void write(uint8_t *buf, uint8_t len) override;
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ANT-Arduino/src/MainClasses/ANT_MbedSerialAnt.h:16:14: error: 'uint32_t MbedSerialAnt::getMs()' marked 'override', but does not override
uint32_t getMs() override;
^~~~~
Result: FAIL
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ANT-Arduino/src/ANT.h:31:0,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ANTPLUS-Arduino/examples/HeartRateMonitor/HeartRateMonitor.ino:19:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ANT-Arduino/src/MainClasses/ANT_MbedSerialAnt.h:8:44: error: 'UARTSerial' was not declared in this scope
class MbedSerialAnt : public BaseSerialAnt<UARTSerial> {
^~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ANT-Arduino/src/MainClasses/ANT_MbedSerialAnt.h:8:44: note: suggested alternative: 'Serial'
class MbedSerialAnt : public BaseSerialAnt<UARTSerial> {
^~~~~~~~~~
Serial
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ANT-Arduino/src/MainClasses/ANT_MbedSerialAnt.h:8:54: error: template argument 1 is invalid
class MbedSerialAnt : public BaseSerialAnt<UARTSerial> {
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ANT-Arduino/src/MainClasses/ANT_MbedSerialAnt.h:11:20: error: 'UARTSerial' has not been declared
void setSerial(UARTSerial &serial) override;
^~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ANT-Arduino/src/MainClasses/ANT_MbedSerialAnt.h:17:5: error: 'UARTSerial' does not name a type; did you mean 'Serial'?
UARTSerial* _serial;
^~~~~~~~~~
Serial
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ANT-Arduino/src/MainClasses/ANT_MbedSerialAnt.h:11:10: error: 'void MbedSerialAnt::setSerial(int&)' marked 'override', but does not override
void setSerial(UARTSerial &serial) override;
^~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ANT-Arduino/src/MainClasses/ANT_MbedSerialAnt.h:13:13: error: 'uint8_t MbedSerialAnt::available()' marked 'override', but does not override
uint8_t available() override;
^~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ANT-Arduino/src/MainClasses/ANT_MbedSerialAnt.h:14:13: error: 'uint8_t MbedSerialAnt::read()' marked 'override', but does not override
uint8_t read() override;
^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ANT-Arduino/src/MainClasses/ANT_MbedSerialAnt.h:15:10: error: 'void MbedSerialAnt::write(uint8_t*, uint8_t)' marked 'override', but does not override
void write(uint8_t *buf, uint8_t len) override;
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ANT-Arduino/src/MainClasses/ANT_MbedSerialAnt.h:16:14: error: 'uint32_t MbedSerialAnt::getMs()' marked 'override', but does not override
uint32_t getMs() override;
^~~~~
Result: FAIL
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ANT-Arduino/src/ANT.h:31:0,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ANTPLUS-Arduino/examples/LEVDisplay/LEVDisplay.ino:12:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ANT-Arduino/src/MainClasses/ANT_MbedSerialAnt.h:8:44: error: 'UARTSerial' was not declared in this scope
class MbedSerialAnt : public BaseSerialAnt<UARTSerial> {
^~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ANT-Arduino/src/MainClasses/ANT_MbedSerialAnt.h:8:44: note: suggested alternative: 'Serial'
class MbedSerialAnt : public BaseSerialAnt<UARTSerial> {
^~~~~~~~~~
Serial
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ANT-Arduino/src/MainClasses/ANT_MbedSerialAnt.h:8:54: error: template argument 1 is invalid
class MbedSerialAnt : public BaseSerialAnt<UARTSerial> {
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ANT-Arduino/src/MainClasses/ANT_MbedSerialAnt.h:11:20: error: 'UARTSerial' has not been declared
void setSerial(UARTSerial &serial) override;
^~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ANT-Arduino/src/MainClasses/ANT_MbedSerialAnt.h:17:5: error: 'UARTSerial' does not name a type; did you mean 'Serial'?
UARTSerial* _serial;
^~~~~~~~~~
Serial
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ANT-Arduino/src/MainClasses/ANT_MbedSerialAnt.h:11:10: error: 'void MbedSerialAnt::setSerial(int&)' marked 'override', but does not override
void setSerial(UARTSerial &serial) override;
^~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ANT-Arduino/src/MainClasses/ANT_MbedSerialAnt.h:13:13: error: 'uint8_t MbedSerialAnt::available()' marked 'override', but does not override
uint8_t available() override;
^~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ANT-Arduino/src/MainClasses/ANT_MbedSerialAnt.h:14:13: error: 'uint8_t MbedSerialAnt::read()' marked 'override', but does not override
uint8_t read() override;
^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ANT-Arduino/src/MainClasses/ANT_MbedSerialAnt.h:15:10: error: 'void MbedSerialAnt::write(uint8_t*, uint8_t)' marked 'override', but does not override
void write(uint8_t *buf, uint8_t len) override;
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ANT-Arduino/src/MainClasses/ANT_MbedSerialAnt.h:16:14: error: 'uint32_t MbedSerialAnt::getMs()' marked 'override', but does not override
uint32_t getMs() override;
^~~~~
Result: FAIL
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ANT-Arduino/src/ANT.h:31:0,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ANTPLUS-Arduino/examples/MuscleOxygenMonitor/MuscleOxygenMonitor.ino:11:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ANT-Arduino/src/MainClasses/ANT_MbedSerialAnt.h:8:44: error: 'UARTSerial' was not declared in this scope
class MbedSerialAnt : public BaseSerialAnt<UARTSerial> {
^~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ANT-Arduino/src/MainClasses/ANT_MbedSerialAnt.h:8:44: note: suggested alternative: 'Serial'
class MbedSerialAnt : public BaseSerialAnt<UARTSerial> {
^~~~~~~~~~
Serial
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ANT-Arduino/src/MainClasses/ANT_MbedSerialAnt.h:8:54: error: template argument 1 is invalid
class MbedSerialAnt : public BaseSerialAnt<UARTSerial> {
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ANT-Arduino/src/MainClasses/ANT_MbedSerialAnt.h:11:20: error: 'UARTSerial' has not been declared
void setSerial(UARTSerial &serial) override;
^~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ANT-Arduino/src/MainClasses/ANT_MbedSerialAnt.h:17:5: error: 'UARTSerial' does not name a type; did you mean 'Serial'?
UARTSerial* _serial;
^~~~~~~~~~
Serial
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ANT-Arduino/src/MainClasses/ANT_MbedSerialAnt.h:11:10: error: 'void MbedSerialAnt::setSerial(int&)' marked 'override', but does not override
void setSerial(UARTSerial &serial) override;
^~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ANT-Arduino/src/MainClasses/ANT_MbedSerialAnt.h:13:13: error: 'uint8_t MbedSerialAnt::available()' marked 'override', but does not override
uint8_t available() override;
^~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ANT-Arduino/src/MainClasses/ANT_MbedSerialAnt.h:14:13: error: 'uint8_t MbedSerialAnt::read()' marked 'override', but does not override
uint8_t read() override;
^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ANT-Arduino/src/MainClasses/ANT_MbedSerialAnt.h:15:10: error: 'void MbedSerialAnt::write(uint8_t*, uint8_t)' marked 'override', but does not override
void write(uint8_t *buf, uint8_t len) override;
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ANT-Arduino/src/MainClasses/ANT_MbedSerialAnt.h:16:14: error: 'uint32_t MbedSerialAnt::getMs()' marked 'override', but does not override
uint32_t getMs() override;
^~~~~
Result: FAIL
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ANT-Arduino/src/ANT.h:31:0,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ANTPLUS-Arduino/examples/ShiftingShifter/ShiftingShifter.ino:11:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ANT-Arduino/src/MainClasses/ANT_MbedSerialAnt.h:8:44: error: 'UARTSerial' was not declared in this scope
class MbedSerialAnt : public BaseSerialAnt<UARTSerial> {
^~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ANT-Arduino/src/MainClasses/ANT_MbedSerialAnt.h:8:44: note: suggested alternative: 'Serial'
class MbedSerialAnt : public BaseSerialAnt<UARTSerial> {
^~~~~~~~~~
Serial
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ANT-Arduino/src/MainClasses/ANT_MbedSerialAnt.h:8:54: error: template argument 1 is invalid
class MbedSerialAnt : public BaseSerialAnt<UARTSerial> {
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ANT-Arduino/src/MainClasses/ANT_MbedSerialAnt.h:11:20: error: 'UARTSerial' has not been declared
void setSerial(UARTSerial &serial) override;
^~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ANT-Arduino/src/MainClasses/ANT_MbedSerialAnt.h:17:5: error: 'UARTSerial' does not name a type; did you mean 'Serial'?
UARTSerial* _serial;
^~~~~~~~~~
Serial
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ANT-Arduino/src/MainClasses/ANT_MbedSerialAnt.h:11:10: error: 'void MbedSerialAnt::setSerial(int&)' marked 'override', but does not override
void setSerial(UARTSerial &serial) override;
^~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ANT-Arduino/src/MainClasses/ANT_MbedSerialAnt.h:13:13: error: 'uint8_t MbedSerialAnt::available()' marked 'override', but does not override
uint8_t available() override;
^~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ANT-Arduino/src/MainClasses/ANT_MbedSerialAnt.h:14:13: error: 'uint8_t MbedSerialAnt::read()' marked 'override', but does not override
uint8_t read() override;
^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ANT-Arduino/src/MainClasses/ANT_MbedSerialAnt.h:15:10: error: 'void MbedSerialAnt::write(uint8_t*, uint8_t)' marked 'override', but does not override
void write(uint8_t *buf, uint8_t len) override;
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ANT-Arduino/src/MainClasses/ANT_MbedSerialAnt.h:16:14: error: 'uint32_t MbedSerialAnt::getMs()' marked 'override', but does not override
uint32_t getMs() override;
^~~~~
Result: PASS
Sketch uses 2614 bytes (5%) of program storage space. Maximum is 49152 bytes. Global variables use 177 bytes (2%) of dynamic memory, leaving 5967 bytes for local variables. Maximum is 6144 bytes.
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ANTPLUS-Arduino/examples/BicyclePowerDisplay/BicyclePowerDisplay.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ANTPLUS-Arduino/examples/BicyclePowerDisplay/BicyclePowerDisplay.ino:21:19: error: 'Serial2' was not declared in this scope
#define antSerial Serial2
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ANTPLUS-Arduino/examples/BicyclePowerDisplay/BicyclePowerDisplay.ino:68:5: note: in expansion of macro 'antSerial'
antSerial.begin(BAUD_RATE);
^~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ANTPLUS-Arduino/examples/BicyclePowerDisplay/BicyclePowerDisplay.ino:21:19: note: suggested alternative: 'Serial1'
#define antSerial Serial2
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ANTPLUS-Arduino/examples/BicyclePowerDisplay/BicyclePowerDisplay.ino:68:5: note: in expansion of macro 'antSerial'
antSerial.begin(BAUD_RATE);
^~~~~~~~~
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ANTPLUS-Arduino/examples/BicyclePowerSensor/BicyclePowerSensor.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ANTPLUS-Arduino/examples/BicyclePowerSensor/BicyclePowerSensor.ino:18:19: error: 'Serial2' was not declared in this scope
#define antSerial Serial2
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ANTPLUS-Arduino/examples/BicyclePowerSensor/BicyclePowerSensor.ino:60:5: note: in expansion of macro 'antSerial'
antSerial.begin(BAUD_RATE);
^~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ANTPLUS-Arduino/examples/BicyclePowerSensor/BicyclePowerSensor.ino:18:19: note: suggested alternative: 'Serial1'
#define antSerial Serial2
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ANTPLUS-Arduino/examples/BicyclePowerSensor/BicyclePowerSensor.ino:60:5: note: in expansion of macro 'antSerial'
antSerial.begin(BAUD_RATE);
^~~~~~~~~
Result: PASS
Sketch uses 13793 bytes (28%) of program storage space. Maximum is 49152 bytes. Global variables use 540 bytes (8%) of dynamic memory, leaving 5604 bytes for local variables. Maximum is 6144 bytes.
Result: PASS
Sketch uses 9038 bytes (18%) of program storage space. Maximum is 49152 bytes. Global variables use 491 bytes (7%) of dynamic memory, leaving 5653 bytes for local variables. Maximum is 6144 bytes.
Result: PASS
Sketch uses 18017 bytes (36%) of program storage space. Maximum is 49152 bytes. Global variables use 608 bytes (9%) of dynamic memory, leaving 5536 bytes for local variables. Maximum is 6144 bytes.
Result: PASS
Sketch uses 14548 bytes (29%) of program storage space. Maximum is 49152 bytes. Global variables use 532 bytes (8%) of dynamic memory, leaving 5612 bytes for local variables. Maximum is 6144 bytes.
Result: PASS
Sketch uses 18575 bytes (37%) of program storage space. Maximum is 49152 bytes. Global variables use 546 bytes (8%) of dynamic memory, leaving 5598 bytes for local variables. Maximum is 6144 bytes.
Result: PASS
Sketch uses 15076 bytes (30%) of program storage space. Maximum is 49152 bytes. Global variables use 548 bytes (8%) of dynamic memory, leaving 5596 bytes for local variables. Maximum is 6144 bytes.
Result: PASS
Sketch uses 18501 bytes (37%) of program storage space. Maximum is 49152 bytes. Global variables use 574 bytes (9%) of dynamic memory, leaving 5570 bytes for local variables. Maximum is 6144 bytes.
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ANTPLUS-Arduino/examples/LEVDisplay/LEVDisplay.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ANTPLUS-Arduino/examples/LEVDisplay/LEVDisplay.ino:46:5: error: 'Serial2' was not declared in this scope
Serial2.begin(BAUD_RATE);
^~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ANTPLUS-Arduino/examples/LEVDisplay/LEVDisplay.ino:46:5: note: suggested alternative: 'Serial1'
Serial2.begin(BAUD_RATE);
^~~~~~~
Serial1
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ANTPLUS-Arduino/examples/MuscleOxygenMonitor/MuscleOxygenMonitor.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ANTPLUS-Arduino/examples/MuscleOxygenMonitor/MuscleOxygenMonitor.ino:28:5: error: 'Serial2' was not declared in this scope
Serial2.begin(BAUD_RATE);
^~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ANTPLUS-Arduino/examples/MuscleOxygenMonitor/MuscleOxygenMonitor.ino:28:5: note: suggested alternative: 'Serial1'
Serial2.begin(BAUD_RATE);
^~~~~~~
Serial1
Result: PASS
Sketch uses 15593 bytes (31%) of program storage space. Maximum is 49152 bytes. Global variables use 553 bytes (9%) of dynamic memory, leaving 5591 bytes for local variables. Maximum is 6144 bytes.
Result: PASS
This library has no main header file so an empty one was created.
Sketch uses 12152 bytes (4%) of program storage space. Maximum is 262144 bytes. Global variables use 2996 bytes (9%) of dynamic memory, leaving 29772 bytes for local variables. Maximum is 32768 bytes.
Result: PASS
Sketch uses 30104 bytes (11%) of program storage space. Maximum is 262144 bytes. Global variables use 3392 bytes (10%) of dynamic memory, leaving 29376 bytes for local variables. Maximum is 32768 bytes.
Result: PASS
Sketch uses 30964 bytes (11%) of program storage space. Maximum is 262144 bytes. Global variables use 3416 bytes (10%) of dynamic memory, leaving 29352 bytes for local variables. Maximum is 32768 bytes.
Result: PASS
Sketch uses 28052 bytes (10%) of program storage space. Maximum is 262144 bytes. Global variables use 3376 bytes (10%) of dynamic memory, leaving 29392 bytes for local variables. Maximum is 32768 bytes.
Result: PASS
Sketch uses 19328 bytes (7%) of program storage space. Maximum is 262144 bytes. Global variables use 3284 bytes (10%) of dynamic memory, leaving 29484 bytes for local variables. Maximum is 32768 bytes.
Result: PASS
Sketch uses 37696 bytes (14%) of program storage space. Maximum is 262144 bytes. Global variables use 3496 bytes (10%) of dynamic memory, leaving 29272 bytes for local variables. Maximum is 32768 bytes.
Result: PASS
Sketch uses 33300 bytes (12%) of program storage space. Maximum is 262144 bytes. Global variables use 3360 bytes (10%) of dynamic memory, leaving 29408 bytes for local variables. Maximum is 32768 bytes.
Result: PASS
Sketch uses 33208 bytes (12%) of program storage space. Maximum is 262144 bytes. Global variables use 3380 bytes (10%) of dynamic memory, leaving 29388 bytes for local variables. Maximum is 32768 bytes.
Result: PASS
Sketch uses 30716 bytes (11%) of program storage space. Maximum is 262144 bytes. Global variables use 3392 bytes (10%) of dynamic memory, leaving 29376 bytes for local variables. Maximum is 32768 bytes.
Result: PASS
Sketch uses 43900 bytes (16%) of program storage space. Maximum is 262144 bytes. Global variables use 3436 bytes (10%) of dynamic memory, leaving 29332 bytes for local variables. Maximum is 32768 bytes.
Result: PASS
Sketch uses 40956 bytes (15%) of program storage space. Maximum is 262144 bytes. Global variables use 3392 bytes (10%) of dynamic memory, leaving 29376 bytes for local variables. Maximum is 32768 bytes.
Result: PASS
Sketch uses 25600 bytes (9%) of program storage space. Maximum is 262144 bytes. Global variables use 3376 bytes (10%) of dynamic memory, leaving 29392 bytes for local variables. Maximum is 32768 bytes.
Result: PASS
Sketch uses 28276 bytes (10%) of program storage space. Maximum is 262144 bytes. Global variables use 3388 bytes (10%) of dynamic memory, leaving 29380 bytes for local variables. Maximum is 32768 bytes.
Result: PASS
Sketch uses 236270 bytes (18%) of program storage space. Maximum is 1310720 bytes. Global variables use 13872 bytes (4%) of dynamic memory, leaving 313808 bytes for local variables. Maximum is 327680 bytes.
Result: PASS
Sketch uses 259794 bytes (19%) of program storage space. Maximum is 1310720 bytes. Global variables use 14496 bytes (4%) of dynamic memory, leaving 313184 bytes for local variables. Maximum is 327680 bytes.
Result: PASS
Sketch uses 261042 bytes (19%) of program storage space. Maximum is 1310720 bytes. Global variables use 14520 bytes (4%) of dynamic memory, leaving 313160 bytes for local variables. Maximum is 327680 bytes.
Result: PASS
Sketch uses 257462 bytes (19%) of program storage space. Maximum is 1310720 bytes. Global variables use 14480 bytes (4%) of dynamic memory, leaving 313200 bytes for local variables. Maximum is 327680 bytes.
Result: PASS
Sketch uses 248362 bytes (18%) of program storage space. Maximum is 1310720 bytes. Global variables use 14392 bytes (4%) of dynamic memory, leaving 313288 bytes for local variables. Maximum is 327680 bytes.
Result: PASS
Sketch uses 267510 bytes (20%) of program storage space. Maximum is 1310720 bytes. Global variables use 14600 bytes (4%) of dynamic memory, leaving 313080 bytes for local variables. Maximum is 327680 bytes.
Result: PASS
Sketch uses 255258 bytes (19%) of program storage space. Maximum is 1310720 bytes. Global variables use 14464 bytes (4%) of dynamic memory, leaving 313216 bytes for local variables. Maximum is 327680 bytes.
Result: PASS
Sketch uses 263378 bytes (20%) of program storage space. Maximum is 1310720 bytes. Global variables use 14488 bytes (4%) of dynamic memory, leaving 313192 bytes for local variables. Maximum is 327680 bytes.
Result: PASS
Sketch uses 260250 bytes (19%) of program storage space. Maximum is 1310720 bytes. Global variables use 14496 bytes (4%) of dynamic memory, leaving 313184 bytes for local variables. Maximum is 327680 bytes.
Result: PASS
Sketch uses 267734 bytes (20%) of program storage space. Maximum is 1310720 bytes. Global variables use 14544 bytes (4%) of dynamic memory, leaving 313136 bytes for local variables. Maximum is 327680 bytes.
Result: PASS
Sketch uses 262578 bytes (20%) of program storage space. Maximum is 1310720 bytes. Global variables use 14496 bytes (4%) of dynamic memory, leaving 313184 bytes for local variables. Maximum is 327680 bytes.
Result: PASS
Sketch uses 255250 bytes (19%) of program storage space. Maximum is 1310720 bytes. Global variables use 14480 bytes (4%) of dynamic memory, leaving 313200 bytes for local variables. Maximum is 327680 bytes.
Result: PASS
Sketch uses 257670 bytes (19%) of program storage space. Maximum is 1310720 bytes. Global variables use 14496 bytes (4%) of dynamic memory, leaving 313184 bytes for local variables. Maximum is 327680 bytes.