This report was generated on Wednesday, 23-Feb-22 22:48:15 CET using arduino-testlib.
Version: 2.0.0
More details
| Board | Claims compatibility | Inclusion | ATtinySerialOutExample |
OpenWindowAlarm |
|---|---|---|---|---|
|
arduino:avr:uno
1.8.4 |
Yes | PASS | FAIL | FAIL |
|
arduino:mbed_nano:nanorp2040connect
2.7.2 |
No ⚠️ | PASS | FAIL | FAIL |
|
arduino:megaavr:nona4809
1.8.7 |
No ⚠️ | PASS | FAIL | FAIL |
|
arduino:samd:mkrwifi1010
1.8.12 |
No ⚠️ | PASS | FAIL | FAIL |
|
esp32:esp32:d1_mini32
1.0.6 |
No ⚠️ | PASS | FAIL | FAIL |
Result: PASS
Sketch uses 444 bytes (1%) of program storage space. Maximum is 32256 bytes. Global variables use 9 bytes (0%) of dynamic memory, leaving 2039 bytes for local variables. Maximum is 2048 bytes.
Result: FAIL
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/ATtinySerialOut/examples/ATtinySerialOutExample/ATtinySerialOutExample.ino: In function 'void setup()':
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/ATtinySerialOut/examples/ATtinySerialOutExample/ATtinySerialOutExample.ino:38:5: error: 'initTXPin' was not declared in this scope
initTXPin();
^~~~~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/ATtinySerialOut/examples/ATtinySerialOutExample/ATtinySerialOutExample.ino:38:5: note: suggested alternative: 'initVariant'
initTXPin();
^~~~~~~~~
initVariant
In file included from /Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/data/packages/arduino/hardware/avr/1.8.4/cores/arduino/Arduino.h:28:0,
from /Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/ATtinySerialOut/examples/ATtinySerialOutExample/ATtinySerialOutExample.ino:25:
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/ATtinySerialOut/examples/ATtinySerialOutExample/ATtinySerialOutExample.ino:40:87: error: expected ')' before 'VERSION_ATTINY_SERIAL_OUT'
Serial.println(F("START " __FILE__ " from " __DATE__ "\r\nUsing library version " VERSION_ATTINY_SERIAL_OUT));
^
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/ATtinySerialOut/examples/ATtinySerialOutExample/ATtinySerialOutExample.ino:40:20: note: in expansion of macro 'F'
Serial.println(F("START " __FILE__ " from " __DATE__ "\r\nUsing library version " VERSION_ATTINY_SERIAL_OUT));
^
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/ATtinySerialOut/examples/ATtinySerialOutExample/ATtinySerialOutExample.ino:42:5: error: 'writeString' was not declared in this scope
writeString("OSCCAL=");
^~~~~~~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/ATtinySerialOut/examples/ATtinySerialOutExample/ATtinySerialOutExample.ino:42:5: note: suggested alternative: 'String'
writeString("OSCCAL=");
^~~~~~~~~~~
String
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/ATtinySerialOut/examples/ATtinySerialOutExample/ATtinySerialOutExample.ino:43:5: error: 'writeUnsignedByteHexWithPrefix' was not declared in this scope
writeUnsignedByteHexWithPrefix(OSCCAL);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/ATtinySerialOut/examples/ATtinySerialOutExample/ATtinySerialOutExample.ino: In function 'void loop()':
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/ATtinySerialOut/examples/ATtinySerialOutExample/ATtinySerialOutExample.ino:52:5: error: 'write1Start8Data1StopNoParityWithCliSei' was not declared in this scope
write1Start8Data1StopNoParityWithCliSei('I');
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/ATtinySerialOut/examples/ATtinySerialOutExample/ATtinySerialOutExample.ino:53:5: error: 'writeBinary' was not declared in this scope
writeBinary(tIndex); // 1 Byte binary output
^~~~~~~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/ATtinySerialOut/examples/ATtinySerialOutExample/ATtinySerialOutExample.ino:54:5: error: 'writeUnsignedByte' was not declared in this scope
writeUnsignedByte(tIndex); // 1-3 Byte ASCII output
^~~~~~~~~~~~~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/ATtinySerialOut/examples/ATtinySerialOutExample/ATtinySerialOutExample.ino:55:5: error: 'writeUnsignedByteHexWithPrefix' was not declared in this scope
writeUnsignedByteHexWithPrefix(tIndex); // 4 Byte output
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/ATtinySerialOut/examples/ATtinySerialOutExample/ATtinySerialOutExample.ino:56:5: error: 'writeUnsignedByteHex' was not declared in this scope
writeUnsignedByteHex(tIndex); // 2 Byte output
^~~~~~~~~~~~~~~~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/ATtinySerialOut/examples/ATtinySerialOutExample/ATtinySerialOutExample.ino:68:12: error: 'class HardwareSerial' has no member named 'printHex'; did you mean 'print'?
Serial.printHex(tIndex);
^~~~~~~~
print
Result: FAIL
In file included from /Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/data/packages/arduino/tools/avr-gcc/7.3.0-atmel3.6.1-arduino7/avr/include/avr/io.h:99:0,
from /Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/data/packages/arduino/tools/avr-gcc/7.3.0-atmel3.6.1-arduino7/avr/include/avr/pgmspace.h:90,
from /Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/data/packages/arduino/hardware/avr/1.8.4/cores/arduino/Arduino.h:28,
from /Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/ATtinySerialOut/examples/OpenWindowAlarm/OpenWindowAlarm.ino:56:
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/ATtinySerialOut/examples/OpenWindowAlarm/OpenWindowAlarm.ino: In function 'void setup()':
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/ATtinySerialOut/examples/OpenWindowAlarm/OpenWindowAlarm.ino:341:29: error: 'PRUSI' was not declared in this scope
PRR = _BV(PRTIM0) | _BV(PRUSI); // Disable timer 0 and USI - has no effect on Power Down current
^
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/ATtinySerialOut/examples/OpenWindowAlarm/OpenWindowAlarm.ino:341:29: note: suggested alternative: 'PRTWI'
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/ATtinySerialOut/examples/OpenWindowAlarm/OpenWindowAlarm.ino: In function 'void PWMtone(unsigned int, unsigned int)':
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/ATtinySerialOut/examples/OpenWindowAlarm/OpenWindowAlarm.ino:476:5: error: 'OCR1C' was not declared in this scope
OCR1C = tOCR - 1; // The frequency of the PWM will be Timer Clock 1 Frequency divided by (OCR1C value + 1).
^~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/ATtinySerialOut/examples/OpenWindowAlarm/OpenWindowAlarm.ino:476:5: note: suggested alternative: 'OCR1A'
OCR1C = tOCR - 1; // The frequency of the PWM will be Timer Clock 1 Frequency divided by (OCR1C value + 1).
^~~~~
OCR1A
In file included from /Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/data/packages/arduino/tools/avr-gcc/7.3.0-atmel3.6.1-arduino7/avr/include/avr/io.h:99:0,
from /Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/data/packages/arduino/tools/avr-gcc/7.3.0-atmel3.6.1-arduino7/avr/include/avr/pgmspace.h:90,
from /Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/data/packages/arduino/hardware/avr/1.8.4/cores/arduino/Arduino.h:28,
from /Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/ATtinySerialOut/examples/OpenWindowAlarm/OpenWindowAlarm.ino:56:
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/ATtinySerialOut/examples/OpenWindowAlarm/OpenWindowAlarm.ino:478:17: error: 'PWM1B' was not declared in this scope
GTCCR = _BV(PWM1B) | _BV(COM1B0); // Switch to PWM Mode with OC1B (PB4) + !OC1B (PB3) outputs enabled
^
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/ATtinySerialOut/examples/OpenWindowAlarm/OpenWindowAlarm.ino:479:5: error: 'TCCR1' was not declared in this scope
TCCR1 = (tPrescaler << CS10);
^~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/ATtinySerialOut/examples/OpenWindowAlarm/OpenWindowAlarm.ino:479:5: note: suggested alternative: 'TCCR1A'
TCCR1 = (tPrescaler << CS10);
^~~~~
TCCR1A
Result: PASS
WARNING: library ATtinySerialOut claims to run on avr architecture(s) and may be incompatible with your current board which runs on mbed_nano architecture(s). Sketch uses 78756 bytes (0%) of program storage space. Maximum is 16777216 bytes. Global variables use 43444 bytes (16%) of dynamic memory, leaving 226892 bytes for local variables. Maximum is 270336 bytes.
Result: FAIL
WARNING: library ATtinySerialOut claims to run on avr architecture(s) and may be incompatible with your current board which runs on mbed_nano architecture(s).
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ATtinySerialOut/examples/ATtinySerialOutExample/ATtinySerialOutExample.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ATtinySerialOut/examples/ATtinySerialOutExample/ATtinySerialOutExample.ino:38:5: error: 'initTXPin' was not declared in this scope
initTXPin();
^~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ATtinySerialOut/examples/ATtinySerialOutExample/ATtinySerialOutExample.ino:40:87: error: expected ')' before 'VERSION_ATTINY_SERIAL_OUT'
Serial.println(F("START " __FILE__ " from " __DATE__ "\r\nUsing library version " VERSION_ATTINY_SERIAL_OUT));
^~~~~~~~~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ATtinySerialOut/examples/ATtinySerialOutExample/ATtinySerialOutExample.ino:42:5: error: 'writeString' was not declared in this scope
writeString("OSCCAL=");
^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ATtinySerialOut/examples/ATtinySerialOutExample/ATtinySerialOutExample.ino:43:36: error: 'OSCCAL' was not declared in this scope
writeUnsignedByteHexWithPrefix(OSCCAL);
^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ATtinySerialOut/examples/ATtinySerialOutExample/ATtinySerialOutExample.ino:43:5: error: 'writeUnsignedByteHexWithPrefix' was not declared in this scope
writeUnsignedByteHexWithPrefix(OSCCAL);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ATtinySerialOut/examples/ATtinySerialOutExample/ATtinySerialOutExample.ino: In function 'void loop()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ATtinySerialOut/examples/ATtinySerialOutExample/ATtinySerialOutExample.ino:52:5: error: 'write1Start8Data1StopNoParityWithCliSei' was not declared in this scope
write1Start8Data1StopNoParityWithCliSei('I');
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ATtinySerialOut/examples/ATtinySerialOutExample/ATtinySerialOutExample.ino:53:5: error: 'writeBinary' was not declared in this scope
writeBinary(tIndex); // 1 Byte binary output
^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ATtinySerialOut/examples/ATtinySerialOutExample/ATtinySerialOutExample.ino:54:5: error: 'writeUnsignedByte' was not declared in this scope
writeUnsignedByte(tIndex); // 1-3 Byte ASCII output
^~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ATtinySerialOut/examples/ATtinySerialOutExample/ATtinySerialOutExample.ino:55:5: error: 'writeUnsignedByteHexWithPrefix' was not declared in this scope
writeUnsignedByteHexWithPrefix(tIndex); // 4 Byte output
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ATtinySerialOut/examples/ATtinySerialOutExample/ATtinySerialOutExample.ino:56:5: error: 'writeUnsignedByteHex' was not declared in this scope
writeUnsignedByteHex(tIndex); // 2 Byte output
^~~~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ATtinySerialOut/examples/ATtinySerialOutExample/ATtinySerialOutExample.ino:68:12: error: 'class arduino::UART' has no member named 'printHex'; did you mean 'print'?
Serial.printHex(tIndex);
^~~~~~~~
print
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ATtinySerialOut/examples/OpenWindowAlarm/OpenWindowAlarm.ino:73:10: fatal error: avr/boot.h: No such file or directory
#include <avr/boot.h> // required for boot_signature_byte_get()
^~~~~~~~~~~~
compilation terminated.
Result: PASS
WARNING: library ATtinySerialOut claims to run on avr architecture(s) and may be incompatible with your current board which runs on megaavr architecture(s). Sketch uses 802 bytes (1%) of program storage space. Maximum is 49152 bytes. Global variables use 22 bytes (0%) of dynamic memory, leaving 6122 bytes for local variables. Maximum is 6144 bytes.
Result: FAIL
WARNING: library ATtinySerialOut claims to run on avr architecture(s) and may be incompatible with your current board which runs on megaavr architecture(s).
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ATtinySerialOut/examples/ATtinySerialOutExample/ATtinySerialOutExample.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ATtinySerialOut/examples/ATtinySerialOutExample/ATtinySerialOutExample.ino:38:5: error: 'initTXPin' was not declared in this scope
initTXPin();
^~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ATtinySerialOut/examples/ATtinySerialOutExample/ATtinySerialOutExample.ino:38:5: note: suggested alternative: 'initVariant'
initTXPin();
^~~~~~~~~
initVariant
In file included from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/cores/arduino/api/String.h:31:0,
from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/cores/arduino/api/IPAddress.h:24,
from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/cores/arduino/api/ArduinoAPI.h:30,
from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/cores/arduino/Arduino.h:23,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ATtinySerialOut/examples/ATtinySerialOutExample/ATtinySerialOutExample.ino:25:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ATtinySerialOut/examples/ATtinySerialOutExample/ATtinySerialOutExample.ino:40:87: error: expected ')' before 'VERSION_ATTINY_SERIAL_OUT'
Serial.println(F("START " __FILE__ " from " __DATE__ "\r\nUsing library version " VERSION_ATTINY_SERIAL_OUT));
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ATtinySerialOut/examples/ATtinySerialOutExample/ATtinySerialOutExample.ino:40:20: note: in expansion of macro 'F'
Serial.println(F("START " __FILE__ " from " __DATE__ "\r\nUsing library version " VERSION_ATTINY_SERIAL_OUT));
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ATtinySerialOut/examples/ATtinySerialOutExample/ATtinySerialOutExample.ino:42:5: error: 'writeString' was not declared in this scope
writeString("OSCCAL=");
^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ATtinySerialOut/examples/ATtinySerialOutExample/ATtinySerialOutExample.ino:43:36: error: 'OSCCAL' was not declared in this scope
writeUnsignedByteHexWithPrefix(OSCCAL);
^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ATtinySerialOut/examples/ATtinySerialOutExample/ATtinySerialOutExample.ino:43:36: note: suggested alternative: 'SCL'
writeUnsignedByteHexWithPrefix(OSCCAL);
^~~~~~
SCL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ATtinySerialOut/examples/ATtinySerialOutExample/ATtinySerialOutExample.ino:43:5: error: 'writeUnsignedByteHexWithPrefix' was not declared in this scope
writeUnsignedByteHexWithPrefix(OSCCAL);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ATtinySerialOut/examples/ATtinySerialOutExample/ATtinySerialOutExample.ino: In function 'void loop()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ATtinySerialOut/examples/ATtinySerialOutExample/ATtinySerialOutExample.ino:52:5: error: 'write1Start8Data1StopNoParityWithCliSei' was not declared in this scope
write1Start8Data1StopNoParityWithCliSei('I');
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ATtinySerialOut/examples/ATtinySerialOutExample/ATtinySerialOutExample.ino:53:5: error: 'writeBinary' was not declared in this scope
writeBinary(tIndex); // 1 Byte binary output
^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ATtinySerialOut/examples/ATtinySerialOutExample/ATtinySerialOutExample.ino:54:5: error: 'writeUnsignedByte' was not declared in this scope
writeUnsignedByte(tIndex); // 1-3 Byte ASCII output
^~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ATtinySerialOut/examples/ATtinySerialOutExample/ATtinySerialOutExample.ino:55:5: error: 'writeUnsignedByteHexWithPrefix' was not declared in this scope
writeUnsignedByteHexWithPrefix(tIndex); // 4 Byte output
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ATtinySerialOut/examples/ATtinySerialOutExample/ATtinySerialOutExample.ino:56:5: error: 'writeUnsignedByteHex' was not declared in this scope
writeUnsignedByteHex(tIndex); // 2 Byte output
^~~~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ATtinySerialOut/examples/ATtinySerialOutExample/ATtinySerialOutExample.ino:68:12: error: 'class UartClass' has no member named 'printHex'; did you mean 'print'?
Serial.printHex(tIndex);
^~~~~~~~
print
Result: FAIL
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ATtinySerialOut/examples/OpenWindowAlarm/OpenWindowAlarm.ino:73:0:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/tools/avr-gcc/7.3.0-atmel3.6.1-arduino5/avr/include/avr/boot.h:116:6: error: #error AVR processor does not provide bootloader support!
# error AVR processor does not provide bootloader support!
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/tools/avr-gcc/7.3.0-atmel3.6.1-arduino5/avr/include/avr/boot.h:127:4: error: #error Cannot find SPM Enable bit definition!
# error Cannot find SPM Enable bit definition!
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ATtinySerialOut/examples/OpenWindowAlarm/OpenWindowAlarm.ino:179:2: error: #error LED pin must not be equal TX pin.
#error LED pin must not be equal TX pin.
^~~~~
Result: PASS
WARNING: library ATtinySerialOut claims to run on avr architecture(s) and may be incompatible with your current board which runs on samd architecture(s). Sketch uses 12156 bytes (4%) of program storage space. Maximum is 262144 bytes. Global variables use 2996 bytes (9%) of dynamic memory, leaving 29772 bytes for local variables. Maximum is 32768 bytes.
Result: FAIL
WARNING: library ATtinySerialOut claims to run on avr architecture(s) and may be incompatible with your current board which runs on samd architecture(s).
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/ATtinySerialOut/examples/ATtinySerialOutExample/ATtinySerialOutExample.ino: In function 'void setup()':
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/ATtinySerialOut/examples/ATtinySerialOutExample/ATtinySerialOutExample.ino:38:5: error: 'initTXPin' was not declared in this scope
initTXPin();
^~~~~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/ATtinySerialOut/examples/ATtinySerialOutExample/ATtinySerialOutExample.ino:38:5: note: suggested alternative: 'initVariant'
initTXPin();
^~~~~~~~~
initVariant
In file included from /Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/cores/arduino/api/String.h:33:0,
from /Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/cores/arduino/api/IPAddress.h:24,
from /Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/cores/arduino/api/ArduinoAPI.h:30,
from /Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/cores/arduino/Arduino.h:23,
from /Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/ATtinySerialOut/examples/ATtinySerialOutExample/ATtinySerialOutExample.ino:25:
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/ATtinySerialOut/examples/ATtinySerialOutExample/ATtinySerialOutExample.ino:40:87: error: expected ')' before 'VERSION_ATTINY_SERIAL_OUT'
Serial.println(F("START " __FILE__ " from " __DATE__ "\r\nUsing library version " VERSION_ATTINY_SERIAL_OUT));
^
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/cores/arduino/api/deprecated-avr-comp/avr/pgmspace.h:34:20: note: in definition of macro 'PSTR'
#define PSTR(str) (str)
^~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/ATtinySerialOut/examples/ATtinySerialOutExample/ATtinySerialOutExample.ino:40:20: note: in expansion of macro 'F'
Serial.println(F("START " __FILE__ " from " __DATE__ "\r\nUsing library version " VERSION_ATTINY_SERIAL_OUT));
^
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/ATtinySerialOut/examples/ATtinySerialOutExample/ATtinySerialOutExample.ino:40:114: error: expected ')' before ';' token
Serial.println(F("START " __FILE__ " from " __DATE__ "\r\nUsing library version " VERSION_ATTINY_SERIAL_OUT));
^
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/ATtinySerialOut/examples/ATtinySerialOutExample/ATtinySerialOutExample.ino:40:114: error: expected ')' before ';' token
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/ATtinySerialOut/examples/ATtinySerialOutExample/ATtinySerialOutExample.ino:40:114: error: expected ')' before ';' token
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/ATtinySerialOut/examples/ATtinySerialOutExample/ATtinySerialOutExample.ino:42:5: error: 'writeString' was not declared in this scope
writeString("OSCCAL=");
^~~~~~~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/ATtinySerialOut/examples/ATtinySerialOutExample/ATtinySerialOutExample.ino:43:36: error: 'OSCCAL' was not declared in this scope
writeUnsignedByteHexWithPrefix(OSCCAL);
^~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/ATtinySerialOut/examples/ATtinySerialOutExample/ATtinySerialOutExample.ino:43:36: note: suggested alternative: 'SCL'
writeUnsignedByteHexWithPrefix(OSCCAL);
^~~~~~
SCL
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/ATtinySerialOut/examples/ATtinySerialOutExample/ATtinySerialOutExample.ino:43:5: error: 'writeUnsignedByteHexWithPrefix' was not declared in this scope
writeUnsignedByteHexWithPrefix(OSCCAL);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/ATtinySerialOut/examples/ATtinySerialOutExample/ATtinySerialOutExample.ino: In function 'void loop()':
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/ATtinySerialOut/examples/ATtinySerialOutExample/ATtinySerialOutExample.ino:52:5: error: 'write1Start8Data1StopNoParityWithCliSei' was not declared in this scope
write1Start8Data1StopNoParityWithCliSei('I');
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/ATtinySerialOut/examples/ATtinySerialOutExample/ATtinySerialOutExample.ino:53:5: error: 'writeBinary' was not declared in this scope
writeBinary(tIndex); // 1 Byte binary output
^~~~~~~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/ATtinySerialOut/examples/ATtinySerialOutExample/ATtinySerialOutExample.ino:54:5: error: 'writeUnsignedByte' was not declared in this scope
writeUnsignedByte(tIndex); // 1-3 Byte ASCII output
^~~~~~~~~~~~~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/ATtinySerialOut/examples/ATtinySerialOutExample/ATtinySerialOutExample.ino:55:5: error: 'writeUnsignedByteHexWithPrefix' was not declared in this scope
writeUnsignedByteHexWithPrefix(tIndex); // 4 Byte output
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/ATtinySerialOut/examples/ATtinySerialOutExample/ATtinySerialOutExample.ino:56:5: error: 'writeUnsignedByteHex' was not declared in this scope
writeUnsignedByteHex(tIndex); // 2 Byte output
^~~~~~~~~~~~~~~~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/ATtinySerialOut/examples/ATtinySerialOutExample/ATtinySerialOutExample.ino:68:12: error: 'class Serial_' has no member named 'printHex'; did you mean 'print'?
Serial.printHex(tIndex);
^~~~~~~~
print
Result: FAIL
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/ATtinySerialOut/examples/OpenWindowAlarm/OpenWindowAlarm.ino:73:10: fatal error: avr/boot.h: No such file or directory
#include <avr/boot.h> // required for boot_signature_byte_get()
^~~~~~~~~~~~
compilation terminated.
Result: PASS
WARNING: library ATtinySerialOut claims to run on avr architecture(s) and may be incompatible with your current board which runs on esp32 architecture(s). Sketch uses 197736 bytes (15%) of program storage space. Maximum is 1310720 bytes. Global variables use 13084 bytes (3%) of dynamic memory, leaving 314596 bytes for local variables. Maximum is 327680 bytes.
Result: FAIL
WARNING: library ATtinySerialOut claims to run on avr architecture(s) and may be incompatible with your current board which runs on esp32 architecture(s).
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ATtinySerialOut/examples/ATtinySerialOutExample/ATtinySerialOutExample.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ATtinySerialOut/examples/ATtinySerialOutExample/ATtinySerialOutExample.ino:38:15: error: 'initTXPin' was not declared in this scope
initTXPin();
^
In file included from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/esp32/hardware/esp32/1.0.6/cores/esp32/Arduino.h:146:0,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ATtinySerialOut/examples/ATtinySerialOutExample/ATtinySerialOutExample.ino:25:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ATtinySerialOut/examples/ATtinySerialOutExample/ATtinySerialOutExample.ino:40:87: error: expected ')' before 'VERSION_ATTINY_SERIAL_OUT'
Serial.println(F("START " __FILE__ " from " __DATE__ "\r\nUsing library version " VERSION_ATTINY_SERIAL_OUT));
^
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/esp32/hardware/esp32/1.0.6/cores/esp32/WString.h:39:76: note: in definition of macro 'FPSTR'
#define FPSTR(pstr_pointer) (reinterpret_cast<const __FlashStringHelper *>(pstr_pointer))
^
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/esp32/hardware/esp32/1.0.6/cores/esp32/WString.h:40:34: note: in expansion of macro 'PSTR'
#define F(string_literal) (FPSTR(PSTR(string_literal)))
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ATtinySerialOut/examples/ATtinySerialOutExample/ATtinySerialOutExample.ino:40:20: note: in expansion of macro 'F'
Serial.println(F("START " __FILE__ " from " __DATE__ "\r\nUsing library version " VERSION_ATTINY_SERIAL_OUT));
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ATtinySerialOut/examples/ATtinySerialOutExample/ATtinySerialOutExample.ino:40:114: error: expected ')' before ';' token
Serial.println(F("START " __FILE__ " from " __DATE__ "\r\nUsing library version " VERSION_ATTINY_SERIAL_OUT));
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ATtinySerialOut/examples/ATtinySerialOutExample/ATtinySerialOutExample.ino:40:114: error: expected ')' before ';' token
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ATtinySerialOut/examples/ATtinySerialOutExample/ATtinySerialOutExample.ino:40:114: error: expected ')' before ';' token
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ATtinySerialOut/examples/ATtinySerialOutExample/ATtinySerialOutExample.ino:40:114: error: expected ')' before ';' token
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ATtinySerialOut/examples/ATtinySerialOutExample/ATtinySerialOutExample.ino:42:26: error: 'writeString' was not declared in this scope
writeString("OSCCAL=");
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ATtinySerialOut/examples/ATtinySerialOutExample/ATtinySerialOutExample.ino:43:36: error: 'OSCCAL' was not declared in this scope
writeUnsignedByteHexWithPrefix(OSCCAL);
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ATtinySerialOut/examples/ATtinySerialOutExample/ATtinySerialOutExample.ino:43:42: error: 'writeUnsignedByteHexWithPrefix' was not declared in this scope
writeUnsignedByteHexWithPrefix(OSCCAL);
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ATtinySerialOut/examples/ATtinySerialOutExample/ATtinySerialOutExample.ino: In function 'void loop()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ATtinySerialOut/examples/ATtinySerialOutExample/ATtinySerialOutExample.ino:52:48: error: 'write1Start8Data1StopNoParityWithCliSei' was not declared in this scope
write1Start8Data1StopNoParityWithCliSei('I');
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ATtinySerialOut/examples/ATtinySerialOutExample/ATtinySerialOutExample.ino:53:23: error: 'writeBinary' was not declared in this scope
writeBinary(tIndex); // 1 Byte binary output
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ATtinySerialOut/examples/ATtinySerialOutExample/ATtinySerialOutExample.ino:54:29: error: 'writeUnsignedByte' was not declared in this scope
writeUnsignedByte(tIndex); // 1-3 Byte ASCII output
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ATtinySerialOut/examples/ATtinySerialOutExample/ATtinySerialOutExample.ino:55:42: error: 'writeUnsignedByteHexWithPrefix' was not declared in this scope
writeUnsignedByteHexWithPrefix(tIndex); // 4 Byte output
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ATtinySerialOut/examples/ATtinySerialOutExample/ATtinySerialOutExample.ino:56:32: error: 'writeUnsignedByteHex' was not declared in this scope
writeUnsignedByteHex(tIndex); // 2 Byte output
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ATtinySerialOut/examples/ATtinySerialOutExample/ATtinySerialOutExample.ino:68:12: error: 'class HardwareSerial' has no member named 'printHex'
Serial.printHex(tIndex);
^
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ATtinySerialOut/examples/OpenWindowAlarm/OpenWindowAlarm.ino:73:65: fatal error: avr/boot.h: No such file or directory compilation terminated.