This report was generated on Wednesday, 23-Feb-22 22:48:15 CET using arduino-testlib.
Version: 1.10.4
More details
| Board | Claims compatibility | Inclusion | StrandtestArduinoBLECallback |
StrandtestBLE_nodelay |
strandtest |
simple_new_operator |
strandtest_nodelay |
strandtest_wheel |
RGBWstrandtest |
StrandtestArduinoBLE |
StrandtestBLE |
buttoncycler |
simple |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
arduino:avr:uno
1.8.4 |
Yes | PASS | FAIL | FAIL | PASS | PASS | PASS | PASS | PASS | FAIL | PASS | PASS | PASS |
|
arduino:mbed_nano:nanorp2040connect
2.7.2 |
Yes | PASS | PASS | FAIL | PASS | PASS | PASS | PASS | PASS | PASS | FAIL | PASS | PASS |
|
arduino:megaavr:nona4809
1.8.7 |
Yes | PASS | FAIL | FAIL | PASS | PASS | PASS | PASS | PASS | FAIL | PASS | PASS | PASS |
|
arduino:samd:mkrwifi1010
1.8.12 |
Yes | PASS | PASS | FAIL | PASS | PASS | PASS | PASS | PASS | PASS | FAIL | PASS | PASS |
|
esp32:esp32:d1_mini32
1.0.6 |
Yes | PASS | FAIL | FAIL | PASS | PASS | PASS | PASS | PASS | FAIL | FAIL | PASS | PASS |
Result: PASS
Sketch uses 444 bytes (1%) of program storage space. Maximum is 32256 bytes. Global variables use 9 bytes (0%) of dynamic memory, leaving 2039 bytes for local variables. Maximum is 2048 bytes.
Result: PASS
Sketch uses 4660 bytes (14%) of program storage space. Maximum is 32256 bytes. Global variables use 41 bytes (2%) of dynamic memory, leaving 2007 bytes for local variables. Maximum is 2048 bytes.
Result: FAIL
WARNING: library ArduinoBLE claims to run on samd, megaavr, mbed, apollo3, mbed_nano, mbed_portenta architecture(s) and may be incompatible with your current board which runs on avr architecture(s). Multiple libraries were found for "Adafruit_NeoPixel.h" Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Adafruit_NeoPixel Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Leaphy_Extra_Extension Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Pinduino
Result: FAIL
WARNING: library ArduinoBLE claims to run on samd, megaavr, mbed, apollo3, mbed_nano, mbed_portenta architecture(s) and may be incompatible with your current board which runs on avr architecture(s). Multiple libraries were found for "Adafruit_NeoPixel.h" Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Adafruit_NeoPixel Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Leaphy_Extra_Extension Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Pinduino
Result: PASS
Sketch uses 20218 bytes (62%) of program storage space. Maximum is 32256 bytes.
Global variables use 1446 bytes (70%) of dynamic memory, leaving 602 bytes for local variables. Maximum is 2048 bytes.
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BLEPeripheral/src/utility/hal_aci_tl.h:86:3: note: type 'struct aci_pins_t' should match type 'struct aci_pins_t'
} aci_pins_t;
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BLEPeripheral/src/utility/lib_aci.h:65:16: note: type 'struct aci_state_t' itself violates the C++ One Definition Rule
typedef struct aci_state_t
^
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Adafruit_NeoPixel/examples/StrandtestBLE_nodelay/StrandtestBLE_nodelay.ino: In function 'void colorWipe(uint32_t, int)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Adafruit_NeoPixel/examples/StrandtestBLE_nodelay/StrandtestBLE_nodelay.ino:126:6: error: 'pixelInterval' was not declared in this scope
if(pixelInterval != wait)
^~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Adafruit_NeoPixel/examples/StrandtestBLE_nodelay/StrandtestBLE_nodelay.ino:128:23: error: 'pixelCurrent' was not declared in this scope
strip.setPixelColor(pixelCurrent, color); // Set pixel's color (in RAM)
^~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Adafruit_NeoPixel/examples/StrandtestBLE_nodelay/StrandtestBLE_nodelay.ino:131:22: error: 'pixelNumber' was not declared in this scope
if(pixelCurrent >= pixelNumber) // Loop the pattern from the first LED
^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Adafruit_NeoPixel/examples/StrandtestBLE_nodelay/StrandtestBLE_nodelay.ino: In function 'void theaterChase(uint32_t, int)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Adafruit_NeoPixel/examples/StrandtestBLE_nodelay/StrandtestBLE_nodelay.ino:139:6: error: 'pixelInterval' was not declared in this scope
if(pixelInterval != wait)
^~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Adafruit_NeoPixel/examples/StrandtestBLE_nodelay/StrandtestBLE_nodelay.ino:141:22: error: 'pixelNumber' was not declared in this scope
for(int i = 0; i < pixelNumber; i++) {
^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Adafruit_NeoPixel/examples/StrandtestBLE_nodelay/StrandtestBLE_nodelay.ino:142:29: error: 'pixelQueue' was not declared in this scope
strip.setPixelColor(i + pixelQueue, color); // Set pixel's color (in RAM)
^~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Adafruit_NeoPixel/examples/StrandtestBLE_nodelay/StrandtestBLE_nodelay.ino:145:20: error: 'pixelNumber' was not declared in this scope
for(int i=0; i < pixelNumber; i+3) {
^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Adafruit_NeoPixel/examples/StrandtestBLE_nodelay/StrandtestBLE_nodelay.ino:146:29: error: 'pixelQueue' was not declared in this scope
strip.setPixelColor(i + pixelQueue, strip.Color(0, 0, 0)); // Set pixel's color (in RAM)
^~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Adafruit_NeoPixel/examples/StrandtestBLE_nodelay/StrandtestBLE_nodelay.ino:148:3: error: 'pixelQueue' was not declared in this scope
pixelQueue++; // Advance current pixel
^~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Adafruit_NeoPixel/examples/StrandtestBLE_nodelay/StrandtestBLE_nodelay.ino: In function 'void rainbow(uint8_t)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Adafruit_NeoPixel/examples/StrandtestBLE_nodelay/StrandtestBLE_nodelay.ino:155:6: error: 'pixelInterval' was not declared in this scope
if(pixelInterval != wait)
^~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Adafruit_NeoPixel/examples/StrandtestBLE_nodelay/StrandtestBLE_nodelay.ino:157:25: error: 'pixelNumber' was not declared in this scope
for(uint16_t i=0; i < pixelNumber; i++) {
^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Adafruit_NeoPixel/examples/StrandtestBLE_nodelay/StrandtestBLE_nodelay.ino:158:39: error: 'pixelCycle' was not declared in this scope
strip.setPixelColor(i, Wheel((i + pixelCycle) & 255)); // Update delay time
^~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Adafruit_NeoPixel/examples/StrandtestBLE_nodelay/StrandtestBLE_nodelay.ino:161:3: error: 'pixelCycle' was not declared in this scope
pixelCycle++; // Advance current cycle
^~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Adafruit_NeoPixel/examples/StrandtestBLE_nodelay/StrandtestBLE_nodelay.ino: In function 'void theaterChaseRainbow(uint8_t)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Adafruit_NeoPixel/examples/StrandtestBLE_nodelay/StrandtestBLE_nodelay.ino:168:6: error: 'pixelInterval' was not declared in this scope
if(pixelInterval != wait)
^~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Adafruit_NeoPixel/examples/StrandtestBLE_nodelay/StrandtestBLE_nodelay.ino:170:20: error: 'pixelNumber' was not declared in this scope
for(int i=0; i < pixelNumber; i+3) {
^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Adafruit_NeoPixel/examples/StrandtestBLE_nodelay/StrandtestBLE_nodelay.ino:171:29: error: 'pixelQueue' was not declared in this scope
strip.setPixelColor(i + pixelQueue, Wheel((i + pixelCycle) % 255)); // Update delay time
^~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Adafruit_NeoPixel/examples/StrandtestBLE_nodelay/StrandtestBLE_nodelay.ino:171:52: error: 'pixelCycle' was not declared in this scope
strip.setPixelColor(i + pixelQueue, Wheel((i + pixelCycle) % 255)); // Update delay time
^~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Adafruit_NeoPixel/examples/StrandtestBLE_nodelay/StrandtestBLE_nodelay.ino:174:20: error: 'pixelNumber' was not declared in this scope
for(int i=0; i < pixelNumber; i+3) {
^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Adafruit_NeoPixel/examples/StrandtestBLE_nodelay/StrandtestBLE_nodelay.ino:175:29: error: 'pixelQueue' was not declared in this scope
strip.setPixelColor(i + pixelQueue, strip.Color(0, 0, 0)); // Update delay time
^~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Adafruit_NeoPixel/examples/StrandtestBLE_nodelay/StrandtestBLE_nodelay.ino:177:3: error: 'pixelQueue' was not declared in this scope
pixelQueue++; // Advance current queue
^~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Adafruit_NeoPixel/examples/StrandtestBLE_nodelay/StrandtestBLE_nodelay.ino:178:3: error: 'pixelCycle' was not declared in this scope
pixelCycle++; // Advance current cycle
^~~~~~~~~~
Multiple libraries were found for "Adafruit_NeoPixel.h"
Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Adafruit_NeoPixel
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Pinduino
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Leaphy_Extra_Extension
Result: PASS
Sketch uses 4126 bytes (12%) of program storage space. Maximum is 32256 bytes. Global variables use 45 bytes (2%) of dynamic memory, leaving 2003 bytes for local variables. Maximum is 2048 bytes.
Result: PASS
Sketch uses 2430 bytes (7%) of program storage space. Maximum is 32256 bytes. Global variables use 41 bytes (2%) of dynamic memory, leaving 2007 bytes for local variables. Maximum is 2048 bytes.
Result: PASS
Sketch uses 2346 bytes (7%) of program storage space. Maximum is 32256 bytes. Global variables use 21 bytes (1%) of dynamic memory, leaving 2027 bytes for local variables. Maximum is 2048 bytes.
Result: PASS
Sketch uses 3984 bytes (12%) of program storage space. Maximum is 32256 bytes. Global variables use 41 bytes (2%) of dynamic memory, leaving 2007 bytes for local variables. Maximum is 2048 bytes.
Result: PASS
Sketch uses 3324 bytes (10%) of program storage space. Maximum is 32256 bytes. Global variables use 59 bytes (2%) of dynamic memory, leaving 1989 bytes for local variables. Maximum is 2048 bytes.
Result: PASS
Sketch uses 3392 bytes (10%) of program storage space. Maximum is 32256 bytes. Global variables use 41 bytes (2%) of dynamic memory, leaving 2007 bytes for local variables. Maximum is 2048 bytes.
Result: PASS
Sketch uses 78756 bytes (0%) of program storage space. Maximum is 16777216 bytes. Global variables use 43444 bytes (16%) of dynamic memory, leaving 226892 bytes for local variables. Maximum is 270336 bytes.
Result: PASS
Sketch uses 84940 bytes (0%) of program storage space. Maximum is 16777216 bytes. Global variables use 43492 bytes (16%) of dynamic memory, leaving 226844 bytes for local variables. Maximum is 270336 bytes.
Result: PASS
Sketch uses 106198 bytes (0%) of program storage space. Maximum is 16777216 bytes. Global variables use 44608 bytes (16%) of dynamic memory, leaving 225728 bytes for local variables. Maximum is 270336 bytes.
Result: PASS
Sketch uses 106322 bytes (0%) of program storage space. Maximum is 16777216 bytes. Global variables use 44608 bytes (16%) of dynamic memory, leaving 225728 bytes for local variables. Maximum is 270336 bytes.
Result: FAIL
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BLEPeripheral/src/utility/lib_aci.h:34:0,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BLEPeripheral/src/nRF8001.h:9,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BLEPeripheral/src/BLEPeripheral.h:26,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Adafruit_NeoPixel/examples/StrandtestBLE/StrandtestBLE.ino:20:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BLEPeripheral/src/utility/hal_platform.h:75:6: error: #error "Unsupported platform"
#error "Unsupported platform"
^~~~~
Multiple libraries were found for "Adafruit_NeoPixel.h"
Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Adafruit_NeoPixel
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Pinduino
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Leaphy_Extra_Extension
Result: FAIL
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BLEPeripheral/src/utility/lib_aci.h:34:0,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BLEPeripheral/src/nRF8001.h:9,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BLEPeripheral/src/BLEPeripheral.h:26,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Adafruit_NeoPixel/examples/StrandtestBLE_nodelay/StrandtestBLE_nodelay.ino:20:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BLEPeripheral/src/utility/hal_platform.h:75:6: error: #error "Unsupported platform"
#error "Unsupported platform"
^~~~~
Multiple libraries were found for "Adafruit_NeoPixel.h"
Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Adafruit_NeoPixel
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Leaphy_Extra_Extension
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Pinduino
Result: PASS
Sketch uses 84786 bytes (0%) of program storage space. Maximum is 16777216 bytes. Global variables use 43496 bytes (16%) of dynamic memory, leaving 226840 bytes for local variables. Maximum is 270336 bytes.
Result: PASS
Sketch uses 83990 bytes (0%) of program storage space. Maximum is 16777216 bytes. Global variables use 43492 bytes (16%) of dynamic memory, leaving 226844 bytes for local variables. Maximum is 270336 bytes.
Result: PASS
Sketch uses 83968 bytes (0%) of program storage space. Maximum is 16777216 bytes. Global variables use 43456 bytes (16%) of dynamic memory, leaving 226880 bytes for local variables. Maximum is 270336 bytes.
Result: PASS
Sketch uses 84742 bytes (0%) of program storage space. Maximum is 16777216 bytes. Global variables use 43492 bytes (16%) of dynamic memory, leaving 226844 bytes for local variables. Maximum is 270336 bytes.
Result: PASS
Sketch uses 84652 bytes (0%) of program storage space. Maximum is 16777216 bytes. Global variables use 43512 bytes (16%) of dynamic memory, leaving 226824 bytes for local variables. Maximum is 270336 bytes.
Result: PASS
Sketch uses 84580 bytes (0%) of program storage space. Maximum is 16777216 bytes. Global variables use 43492 bytes (16%) of dynamic memory, leaving 226844 bytes for local variables. Maximum is 270336 bytes.
Result: PASS
Sketch uses 802 bytes (1%) of program storage space. Maximum is 49152 bytes. Global variables use 22 bytes (0%) of dynamic memory, leaving 6122 bytes for local variables. Maximum is 6144 bytes.
Result: PASS
Sketch uses 5012 bytes (10%) of program storage space. Maximum is 49152 bytes. Global variables use 54 bytes (0%) of dynamic memory, leaving 6090 bytes for local variables. Maximum is 6144 bytes.
Result: FAIL
Multiple libraries were found for "Adafruit_NeoPixel.h" Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Adafruit_NeoPixel Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Leaphy_Extra_Extension Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Pinduino
Result: FAIL
Multiple libraries were found for "Adafruit_NeoPixel.h" Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Adafruit_NeoPixel Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Pinduino Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Leaphy_Extra_Extension
Result: PASS
Sketch uses 22588 bytes (45%) of program storage space. Maximum is 49152 bytes.
Global variables use 986 bytes (16%) of dynamic memory, leaving 5158 bytes for local variables. Maximum is 6144 bytes.
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BLEPeripheral/src/utility/hal_aci_tl.h:86:3: note: type 'struct aci_pins_t' should match type 'struct aci_pins_t'
} aci_pins_t;
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BLEPeripheral/src/utility/lib_aci.h:65:16: note: type 'struct aci_state_t' itself violates the C++ One Definition Rule
typedef struct aci_state_t
^
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Adafruit_NeoPixel/examples/StrandtestBLE_nodelay/StrandtestBLE_nodelay.ino: In function 'void colorWipe(uint32_t, int)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Adafruit_NeoPixel/examples/StrandtestBLE_nodelay/StrandtestBLE_nodelay.ino:126:6: error: 'pixelInterval' was not declared in this scope
if(pixelInterval != wait)
^~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Adafruit_NeoPixel/examples/StrandtestBLE_nodelay/StrandtestBLE_nodelay.ino:128:23: error: 'pixelCurrent' was not declared in this scope
strip.setPixelColor(pixelCurrent, color); // Set pixel's color (in RAM)
^~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Adafruit_NeoPixel/examples/StrandtestBLE_nodelay/StrandtestBLE_nodelay.ino:131:22: error: 'pixelNumber' was not declared in this scope
if(pixelCurrent >= pixelNumber) // Loop the pattern from the first LED
^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Adafruit_NeoPixel/examples/StrandtestBLE_nodelay/StrandtestBLE_nodelay.ino: In function 'void theaterChase(uint32_t, int)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Adafruit_NeoPixel/examples/StrandtestBLE_nodelay/StrandtestBLE_nodelay.ino:139:6: error: 'pixelInterval' was not declared in this scope
if(pixelInterval != wait)
^~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Adafruit_NeoPixel/examples/StrandtestBLE_nodelay/StrandtestBLE_nodelay.ino:141:22: error: 'pixelNumber' was not declared in this scope
for(int i = 0; i < pixelNumber; i++) {
^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Adafruit_NeoPixel/examples/StrandtestBLE_nodelay/StrandtestBLE_nodelay.ino:142:29: error: 'pixelQueue' was not declared in this scope
strip.setPixelColor(i + pixelQueue, color); // Set pixel's color (in RAM)
^~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Adafruit_NeoPixel/examples/StrandtestBLE_nodelay/StrandtestBLE_nodelay.ino:145:20: error: 'pixelNumber' was not declared in this scope
for(int i=0; i < pixelNumber; i+3) {
^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Adafruit_NeoPixel/examples/StrandtestBLE_nodelay/StrandtestBLE_nodelay.ino:146:29: error: 'pixelQueue' was not declared in this scope
strip.setPixelColor(i + pixelQueue, strip.Color(0, 0, 0)); // Set pixel's color (in RAM)
^~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Adafruit_NeoPixel/examples/StrandtestBLE_nodelay/StrandtestBLE_nodelay.ino:148:3: error: 'pixelQueue' was not declared in this scope
pixelQueue++; // Advance current pixel
^~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Adafruit_NeoPixel/examples/StrandtestBLE_nodelay/StrandtestBLE_nodelay.ino: In function 'void rainbow(uint8_t)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Adafruit_NeoPixel/examples/StrandtestBLE_nodelay/StrandtestBLE_nodelay.ino:155:6: error: 'pixelInterval' was not declared in this scope
if(pixelInterval != wait)
^~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Adafruit_NeoPixel/examples/StrandtestBLE_nodelay/StrandtestBLE_nodelay.ino:157:25: error: 'pixelNumber' was not declared in this scope
for(uint16_t i=0; i < pixelNumber; i++) {
^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Adafruit_NeoPixel/examples/StrandtestBLE_nodelay/StrandtestBLE_nodelay.ino:158:39: error: 'pixelCycle' was not declared in this scope
strip.setPixelColor(i, Wheel((i + pixelCycle) & 255)); // Update delay time
^~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Adafruit_NeoPixel/examples/StrandtestBLE_nodelay/StrandtestBLE_nodelay.ino:161:3: error: 'pixelCycle' was not declared in this scope
pixelCycle++; // Advance current cycle
^~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Adafruit_NeoPixel/examples/StrandtestBLE_nodelay/StrandtestBLE_nodelay.ino: In function 'void theaterChaseRainbow(uint8_t)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Adafruit_NeoPixel/examples/StrandtestBLE_nodelay/StrandtestBLE_nodelay.ino:168:6: error: 'pixelInterval' was not declared in this scope
if(pixelInterval != wait)
^~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Adafruit_NeoPixel/examples/StrandtestBLE_nodelay/StrandtestBLE_nodelay.ino:170:20: error: 'pixelNumber' was not declared in this scope
for(int i=0; i < pixelNumber; i+3) {
^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Adafruit_NeoPixel/examples/StrandtestBLE_nodelay/StrandtestBLE_nodelay.ino:171:29: error: 'pixelQueue' was not declared in this scope
strip.setPixelColor(i + pixelQueue, Wheel((i + pixelCycle) % 255)); // Update delay time
^~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Adafruit_NeoPixel/examples/StrandtestBLE_nodelay/StrandtestBLE_nodelay.ino:171:52: error: 'pixelCycle' was not declared in this scope
strip.setPixelColor(i + pixelQueue, Wheel((i + pixelCycle) % 255)); // Update delay time
^~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Adafruit_NeoPixel/examples/StrandtestBLE_nodelay/StrandtestBLE_nodelay.ino:174:20: error: 'pixelNumber' was not declared in this scope
for(int i=0; i < pixelNumber; i+3) {
^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Adafruit_NeoPixel/examples/StrandtestBLE_nodelay/StrandtestBLE_nodelay.ino:175:29: error: 'pixelQueue' was not declared in this scope
strip.setPixelColor(i + pixelQueue, strip.Color(0, 0, 0)); // Update delay time
^~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Adafruit_NeoPixel/examples/StrandtestBLE_nodelay/StrandtestBLE_nodelay.ino:177:3: error: 'pixelQueue' was not declared in this scope
pixelQueue++; // Advance current queue
^~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Adafruit_NeoPixel/examples/StrandtestBLE_nodelay/StrandtestBLE_nodelay.ino:178:3: error: 'pixelCycle' was not declared in this scope
pixelCycle++; // Advance current cycle
^~~~~~~~~~
Multiple libraries were found for "Adafruit_NeoPixel.h"
Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Adafruit_NeoPixel
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Leaphy_Extra_Extension
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Pinduino
Result: PASS
Sketch uses 4454 bytes (9%) of program storage space. Maximum is 49152 bytes. Global variables use 58 bytes (0%) of dynamic memory, leaving 6086 bytes for local variables. Maximum is 6144 bytes.
Result: PASS
Sketch uses 2868 bytes (5%) of program storage space. Maximum is 49152 bytes. Global variables use 54 bytes (0%) of dynamic memory, leaving 6090 bytes for local variables. Maximum is 6144 bytes.
Result: PASS
Sketch uses 2704 bytes (5%) of program storage space. Maximum is 49152 bytes. Global variables use 34 bytes (0%) of dynamic memory, leaving 6110 bytes for local variables. Maximum is 6144 bytes.
Result: PASS
Sketch uses 4342 bytes (8%) of program storage space. Maximum is 49152 bytes. Global variables use 54 bytes (0%) of dynamic memory, leaving 6090 bytes for local variables. Maximum is 6144 bytes.
Result: PASS
Sketch uses 3724 bytes (7%) of program storage space. Maximum is 49152 bytes. Global variables use 72 bytes (1%) of dynamic memory, leaving 6072 bytes for local variables. Maximum is 6144 bytes.
Result: PASS
Sketch uses 3786 bytes (7%) of program storage space. Maximum is 49152 bytes. Global variables use 54 bytes (0%) of dynamic memory, leaving 6090 bytes for local variables. Maximum is 6144 bytes.
Result: PASS
Sketch uses 12156 bytes (4%) of program storage space. Maximum is 262144 bytes. Global variables use 2996 bytes (9%) of dynamic memory, leaving 29772 bytes for local variables. Maximum is 32768 bytes.
Result: PASS
Sketch uses 15180 bytes (5%) of program storage space. Maximum is 262144 bytes. Global variables use 3020 bytes (9%) of dynamic memory, leaving 29748 bytes for local variables. Maximum is 32768 bytes.
Result: PASS
Sketch uses 53860 bytes (20%) of program storage space. Maximum is 262144 bytes. Global variables use 4512 bytes (13%) of dynamic memory, leaving 28256 bytes for local variables. Maximum is 32768 bytes.
Result: PASS
Sketch uses 54060 bytes (20%) of program storage space. Maximum is 262144 bytes. Global variables use 4512 bytes (13%) of dynamic memory, leaving 28256 bytes for local variables. Maximum is 32768 bytes.
Result: FAIL
Multiple libraries were found for "Adafruit_NeoPixel.h" Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Adafruit_NeoPixel Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Pinduino Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Leaphy_Extra_Extension
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Adafruit_NeoPixel/examples/StrandtestBLE_nodelay/StrandtestBLE_nodelay.ino: In function 'void colorWipe(uint32_t, int)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Adafruit_NeoPixel/examples/StrandtestBLE_nodelay/StrandtestBLE_nodelay.ino:126:6: error: 'pixelInterval' was not declared in this scope
if(pixelInterval != wait)
^~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Adafruit_NeoPixel/examples/StrandtestBLE_nodelay/StrandtestBLE_nodelay.ino:128:23: error: 'pixelCurrent' was not declared in this scope
strip.setPixelColor(pixelCurrent, color); // Set pixel's color (in RAM)
^~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Adafruit_NeoPixel/examples/StrandtestBLE_nodelay/StrandtestBLE_nodelay.ino:131:22: error: 'pixelNumber' was not declared in this scope
if(pixelCurrent >= pixelNumber) // Loop the pattern from the first LED
^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Adafruit_NeoPixel/examples/StrandtestBLE_nodelay/StrandtestBLE_nodelay.ino:131:22: note: suggested alternative: 'GetTCNumber'
if(pixelCurrent >= pixelNumber) // Loop the pattern from the first LED
^~~~~~~~~~~
GetTCNumber
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Adafruit_NeoPixel/examples/StrandtestBLE_nodelay/StrandtestBLE_nodelay.ino: In function 'void theaterChase(uint32_t, int)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Adafruit_NeoPixel/examples/StrandtestBLE_nodelay/StrandtestBLE_nodelay.ino:139:6: error: 'pixelInterval' was not declared in this scope
if(pixelInterval != wait)
^~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Adafruit_NeoPixel/examples/StrandtestBLE_nodelay/StrandtestBLE_nodelay.ino:141:22: error: 'pixelNumber' was not declared in this scope
for(int i = 0; i < pixelNumber; i++) {
^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Adafruit_NeoPixel/examples/StrandtestBLE_nodelay/StrandtestBLE_nodelay.ino:141:22: note: suggested alternative: 'GetTCNumber'
for(int i = 0; i < pixelNumber; i++) {
^~~~~~~~~~~
GetTCNumber
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Adafruit_NeoPixel/examples/StrandtestBLE_nodelay/StrandtestBLE_nodelay.ino:142:29: error: 'pixelQueue' was not declared in this scope
strip.setPixelColor(i + pixelQueue, color); // Set pixel's color (in RAM)
^~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Adafruit_NeoPixel/examples/StrandtestBLE_nodelay/StrandtestBLE_nodelay.ino:145:20: error: 'pixelNumber' was not declared in this scope
for(int i=0; i < pixelNumber; i+3) {
^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Adafruit_NeoPixel/examples/StrandtestBLE_nodelay/StrandtestBLE_nodelay.ino:145:20: note: suggested alternative: 'GetTCNumber'
for(int i=0; i < pixelNumber; i+3) {
^~~~~~~~~~~
GetTCNumber
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Adafruit_NeoPixel/examples/StrandtestBLE_nodelay/StrandtestBLE_nodelay.ino:146:29: error: 'pixelQueue' was not declared in this scope
strip.setPixelColor(i + pixelQueue, strip.Color(0, 0, 0)); // Set pixel's color (in RAM)
^~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Adafruit_NeoPixel/examples/StrandtestBLE_nodelay/StrandtestBLE_nodelay.ino:148:3: error: 'pixelQueue' was not declared in this scope
pixelQueue++; // Advance current pixel
^~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Adafruit_NeoPixel/examples/StrandtestBLE_nodelay/StrandtestBLE_nodelay.ino: In function 'void rainbow(uint8_t)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Adafruit_NeoPixel/examples/StrandtestBLE_nodelay/StrandtestBLE_nodelay.ino:155:6: error: 'pixelInterval' was not declared in this scope
if(pixelInterval != wait)
^~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Adafruit_NeoPixel/examples/StrandtestBLE_nodelay/StrandtestBLE_nodelay.ino:157:25: error: 'pixelNumber' was not declared in this scope
for(uint16_t i=0; i < pixelNumber; i++) {
^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Adafruit_NeoPixel/examples/StrandtestBLE_nodelay/StrandtestBLE_nodelay.ino:157:25: note: suggested alternative: 'GetTCNumber'
for(uint16_t i=0; i < pixelNumber; i++) {
^~~~~~~~~~~
GetTCNumber
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Adafruit_NeoPixel/examples/StrandtestBLE_nodelay/StrandtestBLE_nodelay.ino:158:39: error: 'pixelCycle' was not declared in this scope
strip.setPixelColor(i, Wheel((i + pixelCycle) & 255)); // Update delay time
^~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Adafruit_NeoPixel/examples/StrandtestBLE_nodelay/StrandtestBLE_nodelay.ino:161:3: error: 'pixelCycle' was not declared in this scope
pixelCycle++; // Advance current cycle
^~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Adafruit_NeoPixel/examples/StrandtestBLE_nodelay/StrandtestBLE_nodelay.ino: In function 'void theaterChaseRainbow(uint8_t)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Adafruit_NeoPixel/examples/StrandtestBLE_nodelay/StrandtestBLE_nodelay.ino:168:6: error: 'pixelInterval' was not declared in this scope
if(pixelInterval != wait)
^~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Adafruit_NeoPixel/examples/StrandtestBLE_nodelay/StrandtestBLE_nodelay.ino:170:20: error: 'pixelNumber' was not declared in this scope
for(int i=0; i < pixelNumber; i+3) {
^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Adafruit_NeoPixel/examples/StrandtestBLE_nodelay/StrandtestBLE_nodelay.ino:170:20: note: suggested alternative: 'GetTCNumber'
for(int i=0; i < pixelNumber; i+3) {
^~~~~~~~~~~
GetTCNumber
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Adafruit_NeoPixel/examples/StrandtestBLE_nodelay/StrandtestBLE_nodelay.ino:171:29: error: 'pixelQueue' was not declared in this scope
strip.setPixelColor(i + pixelQueue, Wheel((i + pixelCycle) % 255)); // Update delay time
^~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Adafruit_NeoPixel/examples/StrandtestBLE_nodelay/StrandtestBLE_nodelay.ino:171:52: error: 'pixelCycle' was not declared in this scope
strip.setPixelColor(i + pixelQueue, Wheel((i + pixelCycle) % 255)); // Update delay time
^~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Adafruit_NeoPixel/examples/StrandtestBLE_nodelay/StrandtestBLE_nodelay.ino:174:20: error: 'pixelNumber' was not declared in this scope
for(int i=0; i < pixelNumber; i+3) {
^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Adafruit_NeoPixel/examples/StrandtestBLE_nodelay/StrandtestBLE_nodelay.ino:174:20: note: suggested alternative: 'GetTCNumber'
for(int i=0; i < pixelNumber; i+3) {
^~~~~~~~~~~
GetTCNumber
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Adafruit_NeoPixel/examples/StrandtestBLE_nodelay/StrandtestBLE_nodelay.ino:175:29: error: 'pixelQueue' was not declared in this scope
strip.setPixelColor(i + pixelQueue, strip.Color(0, 0, 0)); // Update delay time
^~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Adafruit_NeoPixel/examples/StrandtestBLE_nodelay/StrandtestBLE_nodelay.ino:177:3: error: 'pixelQueue' was not declared in this scope
pixelQueue++; // Advance current queue
^~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Adafruit_NeoPixel/examples/StrandtestBLE_nodelay/StrandtestBLE_nodelay.ino:178:3: error: 'pixelCycle' was not declared in this scope
pixelCycle++; // Advance current cycle
^~~~~~~~~~
Multiple libraries were found for "Adafruit_NeoPixel.h"
Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Adafruit_NeoPixel
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Pinduino
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Leaphy_Extra_Extension
Result: PASS
Sketch uses 14736 bytes (5%) of program storage space. Maximum is 262144 bytes. Global variables use 3040 bytes (9%) of dynamic memory, leaving 29728 bytes for local variables. Maximum is 32768 bytes.
Result: PASS
Sketch uses 13236 bytes (5%) of program storage space. Maximum is 262144 bytes. Global variables use 3020 bytes (9%) of dynamic memory, leaving 29748 bytes for local variables. Maximum is 32768 bytes.
Result: PASS
Sketch uses 13188 bytes (5%) of program storage space. Maximum is 262144 bytes. Global variables use 3016 bytes (9%) of dynamic memory, leaving 29752 bytes for local variables. Maximum is 32768 bytes.
Result: PASS
Sketch uses 14716 bytes (5%) of program storage space. Maximum is 262144 bytes. Global variables use 3020 bytes (9%) of dynamic memory, leaving 29748 bytes for local variables. Maximum is 32768 bytes.
Result: PASS
Sketch uses 14396 bytes (5%) of program storage space. Maximum is 262144 bytes. Global variables use 3060 bytes (9%) of dynamic memory, leaving 29708 bytes for local variables. Maximum is 32768 bytes.
Result: PASS
Sketch uses 14296 bytes (5%) of program storage space. Maximum is 262144 bytes. Global variables use 3020 bytes (9%) of dynamic memory, leaving 29748 bytes for local variables. Maximum is 32768 bytes.
Result: PASS
Sketch uses 198102 bytes (15%) of program storage space. Maximum is 1310720 bytes. Global variables use 13096 bytes (3%) of dynamic memory, leaving 314584 bytes for local variables. Maximum is 327680 bytes.
Result: PASS
Sketch uses 217266 bytes (16%) of program storage space. Maximum is 1310720 bytes. Global variables use 13376 bytes (4%) of dynamic memory, leaving 314304 bytes for local variables. Maximum is 327680 bytes.
Result: FAIL
WARNING: library ArduinoBLE claims to run on samd, megaavr, mbed, apollo3, mbed_nano, mbed_portenta architecture(s) and may be incompatible with your current board which runs on esp32 architecture(s). Multiple libraries were found for "Adafruit_NeoPixel.h" Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Adafruit_NeoPixel Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Pinduino Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Leaphy_Extra_Extension
Result: FAIL
WARNING: library ArduinoBLE claims to run on samd, megaavr, mbed, apollo3, mbed_nano, mbed_portenta architecture(s) and may be incompatible with your current board which runs on esp32 architecture(s). Multiple libraries were found for "Adafruit_NeoPixel.h" Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Adafruit_NeoPixel Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Leaphy_Extra_Extension Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Pinduino
Result: FAIL
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BLEPeripheral/src/utility/lib_aci.h:34:0,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BLEPeripheral/src/nRF8001.h:9,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BLEPeripheral/src/BLEPeripheral.h:26,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Adafruit_NeoPixel/examples/StrandtestBLE/StrandtestBLE.ino:20:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BLEPeripheral/src/utility/hal_platform.h:75:6: error: #error "Unsupported platform"
#error "Unsupported platform"
^
Multiple libraries were found for "Adafruit_NeoPixel.h"
Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Adafruit_NeoPixel
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Leaphy_Extra_Extension
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Pinduino
Result: FAIL
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BLEPeripheral/src/utility/lib_aci.h:34:0,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BLEPeripheral/src/nRF8001.h:9,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BLEPeripheral/src/BLEPeripheral.h:26,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Adafruit_NeoPixel/examples/StrandtestBLE_nodelay/StrandtestBLE_nodelay.ino:20:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BLEPeripheral/src/utility/hal_platform.h:75:6: error: #error "Unsupported platform"
#error "Unsupported platform"
^
Multiple libraries were found for "Adafruit_NeoPixel.h"
Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Adafruit_NeoPixel
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Leaphy_Extra_Extension
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Pinduino
Result: PASS
Sketch uses 216830 bytes (16%) of program storage space. Maximum is 1310720 bytes. Global variables use 13384 bytes (4%) of dynamic memory, leaving 314296 bytes for local variables. Maximum is 327680 bytes.
Result: PASS
Sketch uses 215642 bytes (16%) of program storage space. Maximum is 1310720 bytes. Global variables use 13376 bytes (4%) of dynamic memory, leaving 314304 bytes for local variables. Maximum is 327680 bytes.
Result: PASS
Sketch uses 216846 bytes (16%) of program storage space. Maximum is 1310720 bytes. Global variables use 13376 bytes (4%) of dynamic memory, leaving 314304 bytes for local variables. Maximum is 327680 bytes.
Result: PASS
Sketch uses 216770 bytes (16%) of program storage space. Maximum is 1310720 bytes. Global variables use 13376 bytes (4%) of dynamic memory, leaving 314304 bytes for local variables. Maximum is 327680 bytes.
Result: PASS
Sketch uses 216430 bytes (16%) of program storage space. Maximum is 1310720 bytes. Global variables use 13416 bytes (4%) of dynamic memory, leaving 314264 bytes for local variables. Maximum is 327680 bytes.
Result: PASS
Sketch uses 216442 bytes (16%) of program storage space. Maximum is 1310720 bytes. Global variables use 13376 bytes (4%) of dynamic memory, leaving 314304 bytes for local variables. Maximum is 327680 bytes.