Adafruit UNTZtrument - compatibility matrix

This report was generated on Wednesday, 23-Feb-22 22:48:15 CET using arduino-testlib.

Adafruit UNTZtrument

Version: 2.0.1
More details

Compatibility matrix

Board	Claims compatibility	Inclusion	BLE_UNTZtrument_Hello_World	BLE_UNTZtrument_Step_Seq	UNTZtrument_Hello_World	UNTZtrument_Step_Seq
arduino:avr:uno 1.8.4	Yes	PASS	PASS	PASS	FAIL	FAIL
arduino:mbed_nano:nanorp2040connect 2.7.2	Yes ⚠️	FAIL	FAIL	FAIL	FAIL	FAIL
arduino:megaavr:nona4809 1.8.7	Yes	PASS	FAIL	FAIL	FAIL	FAIL
arduino:samd:mkrwifi1010 1.8.12	Yes	PASS	PASS	PASS	PASS	PASS
esp32:esp32:d1_mini32 1.0.6	Yes ⚠️	FAIL	FAIL	FAIL	FAIL	FAIL

Compilation logs

arduino:avr:uno @ 1.8.4

Inclusion

Result: PASS

Sketch uses 1636 bytes (5%) of program storage space. Maximum is 32256 bytes.
Global variables use 122 bytes (5%) of dynamic memory, leaving 1926 bytes for local variables. Maximum is 2048 bytes.

examples/BLE_UNTZtrument_Hello_World

Result: PASS

Sketch uses 14546 bytes (45%) of program storage space. Maximum is 32256 bytes.
Global variables use 857 bytes (41%) of dynamic memory, leaving 1191 bytes for local variables. Maximum is 2048 bytes.

examples/BLE_UNTZtrument_Step_Seq

Result: PASS

Sketch uses 16174 bytes (50%) of program storage space. Maximum is 32256 bytes.
Global variables use 897 bytes (43%) of dynamic memory, leaving 1151 bytes for local variables. Maximum is 2048 bytes.

examples/UNTZtrument_Hello_World

Result: FAIL

In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Adafruit_UNTZtrument/examples/UNTZtrument_Hello_World/UNTZtrument_Hello_World.ino:9:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MIDIUSB/src/MIDIUSB.h:18:2: error: #error MIDIUSB can only be used with an USB MCU.
 #error MIDIUSB can only be used with an USB MCU.
  ^~~~~

examples/UNTZtrument_Step_Seq

Result: FAIL

In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Adafruit_UNTZtrument/examples/UNTZtrument_Step_Seq/UNTZtrument_Step_Seq.ino:8:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MIDIUSB/src/MIDIUSB.h:18:2: error: #error MIDIUSB can only be used with an USB MCU.
 #error MIDIUSB can only be used with an USB MCU.
  ^~~~~

arduino:mbed_nano:nanorp2040connect @ 2.7.2

Inclusion

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Adafruit_UNTZtrument/Adafruit_UNTZtrument.cpp: In constructor 'enc::enc(uint8_t, uint8_t, boolean)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Adafruit_UNTZtrument/Adafruit_UNTZtrument.cpp:128:13: error: 'portInputRegister' was not declared in this scope
   pinRegA = portInputRegister(digitalPinToPort(pinA));
             ^~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Adafruit_UNTZtrument/Adafruit_UNTZtrument.cpp:130:14: error: 'digitalPinToBitMask' was not declared in this scope
   pinMaskA = digitalPinToBitMask(pinA);
              ^~~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Adafruit_UNTZtrument/Adafruit_UNTZtrument.cpp:130:14: note: suggested alternative: 'digitalPinToPinName'
   pinMaskA = digitalPinToBitMask(pinA);
              ^~~~~~~~~~~~~~~~~~~
              digitalPinToPinName

examples/BLE_UNTZtrument_Hello_World

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Dabble/src/SoftwareSerial.cpp:45:10: fatal error: util/delay_basic.h: No such file or directory
 #include <util/delay_basic.h>
          ^~~~~~~~~~~~~~~~~~~~
compilation terminated.
Multiple libraries were found for "SoftwareSerial.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Dabble
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EspSoftwareSerial
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Printoo_Library

examples/BLE_UNTZtrument_Step_Seq

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Dabble/src/SoftwareSerial.cpp:45:10: fatal error: util/delay_basic.h: No such file or directory
 #include <util/delay_basic.h>
          ^~~~~~~~~~~~~~~~~~~~
compilation terminated.
Multiple libraries were found for "SoftwareSerial.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Dabble
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Printoo_Library
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EspSoftwareSerial

examples/UNTZtrument_Hello_World

Result: FAIL

WARNING: library MIDIUSB claims to run on avr, sam, samd architecture(s) and may be incompatible with your current board which runs on mbed_nano architecture(s).
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Adafruit_UNTZtrument/examples/UNTZtrument_Hello_World/UNTZtrument_Hello_World.ino:9:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MIDIUSB/src/MIDIUSB.h:18:2: error: #error MIDIUSB can only be used with an USB MCU.
 #error MIDIUSB can only be used with an USB MCU.
  ^~~~~
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Adafruit_UNTZtrument/examples/UNTZtrument_Hello_World/UNTZtrument_Hello_World.ino:9:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MIDIUSB/src/MIDIUSB.h:78:2: error: #error "Unsupported architecture"
 #error "Unsupported architecture"
  ^~~~~

examples/UNTZtrument_Step_Seq

Result: FAIL

WARNING: library MIDIUSB claims to run on avr, sam, samd architecture(s) and may be incompatible with your current board which runs on mbed_nano architecture(s).
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Adafruit_UNTZtrument/examples/UNTZtrument_Step_Seq/UNTZtrument_Step_Seq.ino:8:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MIDIUSB/src/MIDIUSB.h:18:2: error: #error MIDIUSB can only be used with an USB MCU.
 #error MIDIUSB can only be used with an USB MCU.
  ^~~~~
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Adafruit_UNTZtrument/examples/UNTZtrument_Step_Seq/UNTZtrument_Step_Seq.ino:8:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MIDIUSB/src/MIDIUSB.h:78:2: error: #error "Unsupported architecture"
 #error "Unsupported architecture"
  ^~~~~

arduino:megaavr:nona4809 @ 1.8.7

Inclusion

Result: PASS

Sketch uses 3104 bytes (6%) of program storage space. Maximum is 49152 bytes.
Global variables use 317 bytes (5%) of dynamic memory, leaving 5827 bytes for local variables. Maximum is 6144 bytes.
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Adafruit_Trellis_Library/Adafruit_Trellis.cpp:22:0:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h: In member function 'boolean Adafruit_Trellis::readSwitches()':
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:63:12: note: candidate 1: size_t TwoWire::requestFrom(int, int)
     size_t requestFrom(int, int);
            ^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:61:12: note: candidate 2: virtual size_t TwoWire::requestFrom(uint8_t, size_t)
     size_t requestFrom(uint8_t, size_t);
            ^~~~~~~~~~~

examples/BLE_UNTZtrument_Hello_World

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Adafruit_UNTZtrument/examples/BLE_UNTZtrument_Hello_World/BLE_UNTZtrument_Hello_World.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Adafruit_UNTZtrument/examples/BLE_UNTZtrument_Hello_World/BLE_UNTZtrument_Hello_World.ino:116:7: error: 'TWBR' was not declared in this scope
       TWBR = 12; // 400 KHz I2C on 16 MHz AVR
       ^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Adafruit_UNTZtrument/examples/BLE_UNTZtrument_Hello_World/BLE_UNTZtrument_Hello_World.ino:116:7: note: suggested alternative: 'TWI0'
       TWBR = 12; // 400 KHz I2C on 16 MHz AVR
       ^~~~
       TWI0
Multiple libraries were found for "SoftwareSerial.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/SoftwareSerial
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EspSoftwareSerial
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Printoo_Library
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Dabble

examples/BLE_UNTZtrument_Step_Seq

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Adafruit_UNTZtrument/examples/BLE_UNTZtrument_Step_Seq/BLE_UNTZtrument_Step_Seq.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Adafruit_UNTZtrument/examples/BLE_UNTZtrument_Step_Seq/BLE_UNTZtrument_Step_Seq.ino:123:7: error: 'TWBR' was not declared in this scope
       TWBR = 12; // 400 KHz I2C on 16 MHz AVR
       ^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Adafruit_UNTZtrument/examples/BLE_UNTZtrument_Step_Seq/BLE_UNTZtrument_Step_Seq.ino:123:7: note: suggested alternative: 'TWI0'
       TWBR = 12; // 400 KHz I2C on 16 MHz AVR
       ^~~~
       TWI0
Multiple libraries were found for "SoftwareSerial.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/SoftwareSerial
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Dabble
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EspSoftwareSerial
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Printoo_Library

examples/UNTZtrument_Hello_World

Result: FAIL

WARNING: library MIDIUSB claims to run on avr, sam, samd architecture(s) and may be incompatible with your current board which runs on megaavr architecture(s).
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Adafruit_UNTZtrument/examples/UNTZtrument_Hello_World/UNTZtrument_Hello_World.ino:9:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MIDIUSB/src/MIDIUSB.h:18:2: error: #error MIDIUSB can only be used with an USB MCU.
 #error MIDIUSB can only be used with an USB MCU.
  ^~~~~
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Adafruit_UNTZtrument/examples/UNTZtrument_Hello_World/UNTZtrument_Hello_World.ino:9:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MIDIUSB/src/MIDIUSB.h:78:2: error: #error "Unsupported architecture"
 #error "Unsupported architecture"
  ^~~~~

examples/UNTZtrument_Step_Seq

Result: FAIL

WARNING: library MIDIUSB claims to run on avr, sam, samd architecture(s) and may be incompatible with your current board which runs on megaavr architecture(s).
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Adafruit_UNTZtrument/examples/UNTZtrument_Step_Seq/UNTZtrument_Step_Seq.ino:8:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MIDIUSB/src/MIDIUSB.h:18:2: error: #error MIDIUSB can only be used with an USB MCU.
 #error MIDIUSB can only be used with an USB MCU.
  ^~~~~
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Adafruit_UNTZtrument/examples/UNTZtrument_Step_Seq/UNTZtrument_Step_Seq.ino:8:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MIDIUSB/src/MIDIUSB.h:78:2: error: #error "Unsupported architecture"
 #error "Unsupported architecture"
  ^~~~~

arduino:samd:mkrwifi1010 @ 1.8.12

Inclusion

Result: PASS

Sketch uses 13588 bytes (5%) of program storage space. Maximum is 262144 bytes.
Global variables use 3568 bytes (10%) of dynamic memory, leaving 29200 bytes for local variables. Maximum is 32768 bytes.

examples/BLE_UNTZtrument_Hello_World

Result: PASS

Sketch uses 24040 bytes (9%) of program storage space. Maximum is 262144 bytes.
Global variables use 4428 bytes (13%) of dynamic memory, leaving 28340 bytes for local variables. Maximum is 32768 bytes.

examples/BLE_UNTZtrument_Step_Seq

Result: PASS

Sketch uses 25228 bytes (9%) of program storage space. Maximum is 262144 bytes.
Global variables use 4484 bytes (13%) of dynamic memory, leaving 28284 bytes for local variables. Maximum is 32768 bytes.

examples/UNTZtrument_Hello_World

Result: PASS

Sketch uses 15984 bytes (6%) of program storage space. Maximum is 262144 bytes.
Global variables use 3772 bytes (11%) of dynamic memory, leaving 28996 bytes for local variables. Maximum is 32768 bytes.

examples/UNTZtrument_Step_Seq

Result: PASS

Sketch uses 17704 bytes (6%) of program storage space. Maximum is 262144 bytes.
Global variables use 3828 bytes (11%) of dynamic memory, leaving 28940 bytes for local variables. Maximum is 32768 bytes.

esp32:esp32:d1_mini32 @ 1.0.6

Inclusion

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Adafruit_UNTZtrument/Adafruit_UNTZtrument.cpp: In constructor 'enc::enc(uint8_t, uint8_t, boolean)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Adafruit_UNTZtrument/Adafruit_UNTZtrument.cpp:128:11: error: cannot convert 'volatile uint32_t* {aka volatile unsigned int*}' to 'volatile uint8_t* {aka volatile unsigned char*}' in assignment
   pinRegA = portInputRegister(digitalPinToPort(pinA));
           ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Adafruit_UNTZtrument/Adafruit_UNTZtrument.cpp:129:11: error: cannot convert 'volatile uint32_t* {aka volatile unsigned int*}' to 'volatile uint8_t* {aka volatile unsigned char*}' in assignment
   pinRegB = portInputRegister(digitalPinToPort(pinB));
           ^

examples/BLE_UNTZtrument_Hello_World

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Adafruit_UNTZtrument/Adafruit_UNTZtrument.cpp: In constructor 'enc::enc(uint8_t, uint8_t, boolean)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Adafruit_UNTZtrument/Adafruit_UNTZtrument.cpp:128:11: error: cannot convert 'volatile uint32_t* {aka volatile unsigned int*}' to 'volatile uint8_t* {aka volatile unsigned char*}' in assignment
   pinRegA = portInputRegister(digitalPinToPort(pinA));
           ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Adafruit_UNTZtrument/Adafruit_UNTZtrument.cpp:129:11: error: cannot convert 'volatile uint32_t* {aka volatile unsigned int*}' to 'volatile uint8_t* {aka volatile unsigned char*}' in assignment
   pinRegB = portInputRegister(digitalPinToPort(pinB));
           ^
Multiple libraries were found for "SoftwareSerial.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EspSoftwareSerial
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Dabble
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Printoo_Library

examples/BLE_UNTZtrument_Step_Seq

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Adafruit_UNTZtrument/Adafruit_UNTZtrument.cpp: In constructor 'enc::enc(uint8_t, uint8_t, boolean)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Adafruit_UNTZtrument/Adafruit_UNTZtrument.cpp:128:11: error: cannot convert 'volatile uint32_t* {aka volatile unsigned int*}' to 'volatile uint8_t* {aka volatile unsigned char*}' in assignment
   pinRegA = portInputRegister(digitalPinToPort(pinA));
           ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Adafruit_UNTZtrument/Adafruit_UNTZtrument.cpp:129:11: error: cannot convert 'volatile uint32_t* {aka volatile unsigned int*}' to 'volatile uint8_t* {aka volatile unsigned char*}' in assignment
   pinRegB = portInputRegister(digitalPinToPort(pinB));
           ^
Multiple libraries were found for "SoftwareSerial.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EspSoftwareSerial
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Printoo_Library
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Dabble

examples/UNTZtrument_Hello_World

Result: FAIL

WARNING: library MIDIUSB claims to run on avr, sam, samd architecture(s) and may be incompatible with your current board which runs on esp32 architecture(s).
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Adafruit_UNTZtrument/examples/UNTZtrument_Hello_World/UNTZtrument_Hello_World.ino:9:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MIDIUSB/src/MIDIUSB.h:18:2: error: #error MIDIUSB can only be used with an USB MCU.
 #error MIDIUSB can only be used with an USB MCU.
  ^
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Adafruit_UNTZtrument/examples/UNTZtrument_Hello_World/UNTZtrument_Hello_World.ino:9:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MIDIUSB/src/MIDIUSB.h:78:2: error: #error "Unsupported architecture"
 #error "Unsupported architecture"
  ^

examples/UNTZtrument_Step_Seq

Result: FAIL

WARNING: library MIDIUSB claims to run on avr, sam, samd architecture(s) and may be incompatible with your current board which runs on esp32 architecture(s).
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Adafruit_UNTZtrument/examples/UNTZtrument_Step_Seq/UNTZtrument_Step_Seq.ino:8:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MIDIUSB/src/MIDIUSB.h:18:2: error: #error MIDIUSB can only be used with an USB MCU.
 #error MIDIUSB can only be used with an USB MCU.
  ^
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Adafruit_UNTZtrument/examples/UNTZtrument_Step_Seq/UNTZtrument_Step_Seq.ino:8:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MIDIUSB/src/MIDIUSB.h:78:2: error: #error "Unsupported architecture"
 #error "Unsupported architecture"
  ^