AnalogIO-Arduino - compatibility matrix

This report was generated on Wednesday, 23-Feb-22 22:48:15 CET using arduino-testlib.

AnalogIO-Arduino

Version: 1.1.1
More details

Compatibility matrix

controllerLed

controllerLedWithPercent

readFromDevice

writeToDevice

blinkLed

changeSpeed

Compilation logs

arduino:avr:uno @ 1.8.4

Inclusion

Result: PASS
This library has no main header file so an empty one was created.

Sketch uses 466 bytes (1%) of program storage space. Maximum is 32256 bytes.
Global variables use 9 bytes (0%) of dynamic memory, leaving 2039 bytes for local variables. Maximum is 2048 bytes.

examples/blinkLed

Result: PASS

Sketch uses 2448 bytes (7%) of program storage space. Maximum is 32256 bytes.
Global variables use 196 bytes (9%) of dynamic memory, leaving 1852 bytes for local variables. Maximum is 2048 bytes.

examples/changeSpeed

Result: PASS

Sketch uses 2410 bytes (7%) of program storage space. Maximum is 32256 bytes.
Global variables use 214 bytes (10%) of dynamic memory, leaving 1834 bytes for local variables. Maximum is 2048 bytes.

examples/controllerLed

Result: PASS

Sketch uses 3382 bytes (10%) of program storage space. Maximum is 32256 bytes.
Global variables use 244 bytes (11%) of dynamic memory, leaving 1804 bytes for local variables. Maximum is 2048 bytes.

examples/controllerLedWithPercent

Result: PASS

Sketch uses 4248 bytes (13%) of program storage space. Maximum is 32256 bytes.
Global variables use 244 bytes (11%) of dynamic memory, leaving 1804 bytes for local variables. Maximum is 2048 bytes.

examples/readFromDevice

Result: PASS

Sketch uses 3028 bytes (9%) of program storage space. Maximum is 32256 bytes.
Global variables use 280 bytes (13%) of dynamic memory, leaving 1768 bytes for local variables. Maximum is 2048 bytes.

examples/writeToDevice

Result: PASS

Sketch uses 2442 bytes (7%) of program storage space. Maximum is 32256 bytes.
Global variables use 258 bytes (12%) of dynamic memory, leaving 1790 bytes for local variables. Maximum is 2048 bytes.

arduino:mbed_nano:nanorp2040connect @ 2.7.2

Inclusion

Result: PASS

Sketch uses 78756 bytes (0%) of program storage space. Maximum is 16777216 bytes.
Global variables use 43444 bytes (16%) of dynamic memory, leaving 226892 bytes for local variables. Maximum is 270336 bytes.

examples/blinkLed

Result: PASS

Sketch uses 83096 bytes (0%) of program storage space. Maximum is 16777216 bytes.
Global variables use 43464 bytes (16%) of dynamic memory, leaving 226872 bytes for local variables. Maximum is 270336 bytes.

examples/changeSpeed

Result: PASS

Sketch uses 80138 bytes (0%) of program storage space. Maximum is 16777216 bytes.
Global variables use 43532 bytes (16%) of dynamic memory, leaving 226804 bytes for local variables. Maximum is 270336 bytes.

examples/controllerLed

Result: PASS

Sketch uses 84468 bytes (0%) of program storage space. Maximum is 16777216 bytes.
Global variables use 43548 bytes (16%) of dynamic memory, leaving 226788 bytes for local variables. Maximum is 270336 bytes.

examples/controllerLedWithPercent

Result: PASS

Sketch uses 84460 bytes (0%) of program storage space. Maximum is 16777216 bytes.
Global variables use 43548 bytes (16%) of dynamic memory, leaving 226788 bytes for local variables. Maximum is 270336 bytes.

examples/readFromDevice

Result: PASS

Sketch uses 80366 bytes (0%) of program storage space. Maximum is 16777216 bytes.
Global variables use 43564 bytes (16%) of dynamic memory, leaving 226772 bytes for local variables. Maximum is 270336 bytes.

examples/writeToDevice

Result: PASS

Sketch uses 83008 bytes (0%) of program storage space. Maximum is 16777216 bytes.
Global variables use 43452 bytes (16%) of dynamic memory, leaving 226884 bytes for local variables. Maximum is 270336 bytes.

arduino:megaavr:nona4809 @ 1.8.7

Inclusion

Result: PASS

Sketch uses 802 bytes (1%) of program storage space. Maximum is 49152 bytes.
Global variables use 22 bytes (0%) of dynamic memory, leaving 6122 bytes for local variables. Maximum is 6144 bytes.

examples/blinkLed

Result: PASS

Sketch uses 3240 bytes (6%) of program storage space. Maximum is 49152 bytes.
Global variables use 189 bytes (3%) of dynamic memory, leaving 5955 bytes for local variables. Maximum is 6144 bytes.

examples/changeSpeed

Result: PASS

Sketch uses 3398 bytes (6%) of program storage space. Maximum is 49152 bytes.
Global variables use 191 bytes (3%) of dynamic memory, leaving 5953 bytes for local variables. Maximum is 6144 bytes.

examples/controllerLed

Result: PASS

Sketch uses 4137 bytes (8%) of program storage space. Maximum is 49152 bytes.
Global variables use 201 bytes (3%) of dynamic memory, leaving 5943 bytes for local variables. Maximum is 6144 bytes.

examples/controllerLedWithPercent

Result: PASS

Sketch uses 5013 bytes (10%) of program storage space. Maximum is 49152 bytes.
Global variables use 201 bytes (3%) of dynamic memory, leaving 5943 bytes for local variables. Maximum is 6144 bytes.

examples/readFromDevice

Result: PASS

Sketch uses 3897 bytes (7%) of program storage space. Maximum is 49152 bytes.
Global variables use 219 bytes (3%) of dynamic memory, leaving 5925 bytes for local variables. Maximum is 6144 bytes.

examples/writeToDevice

Result: PASS

Sketch uses 3191 bytes (6%) of program storage space. Maximum is 49152 bytes.
Global variables use 183 bytes (2%) of dynamic memory, leaving 5961 bytes for local variables. Maximum is 6144 bytes.

arduino:samd:mkrwifi1010 @ 1.8.12

Inclusion

Result: PASS
This library has no main header file so an empty one was created.

Sketch uses 12156 bytes (4%) of program storage space. Maximum is 262144 bytes.
Global variables use 2996 bytes (9%) of dynamic memory, leaving 29772 bytes for local variables. Maximum is 32768 bytes.

examples/blinkLed

Result: PASS

Sketch uses 13620 bytes (5%) of program storage space. Maximum is 262144 bytes.
Global variables use 3052 bytes (9%) of dynamic memory, leaving 29716 bytes for local variables. Maximum is 32768 bytes.

examples/changeSpeed

Result: PASS

Sketch uses 12840 bytes (4%) of program storage space. Maximum is 262144 bytes.
Global variables use 3012 bytes (9%) of dynamic memory, leaving 29756 bytes for local variables. Maximum is 32768 bytes.

examples/controllerLed

Result: PASS

Sketch uses 18368 bytes (7%) of program storage space. Maximum is 262144 bytes.
Global variables use 3064 bytes (9%) of dynamic memory, leaving 29704 bytes for local variables. Maximum is 32768 bytes.

examples/controllerLedWithPercent

Result: PASS

Sketch uses 18360 bytes (7%) of program storage space. Maximum is 262144 bytes.
Global variables use 3064 bytes (9%) of dynamic memory, leaving 29704 bytes for local variables. Maximum is 32768 bytes.

examples/readFromDevice

Result: PASS

Sketch uses 13656 bytes (5%) of program storage space. Maximum is 262144 bytes.
Global variables use 3044 bytes (9%) of dynamic memory, leaving 29724 bytes for local variables. Maximum is 32768 bytes.

examples/writeToDevice

Result: PASS

Sketch uses 13728 bytes (5%) of program storage space. Maximum is 262144 bytes.
Global variables use 3044 bytes (9%) of dynamic memory, leaving 29724 bytes for local variables. Maximum is 32768 bytes.

esp32:esp32:d1_mini32 @ 1.0.6

Inclusion

Result: FAIL

In file included from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/esp32/hardware/esp32/1.0.6/tools/sdk/include/esp32/rom/ets_sys.h:21:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/esp32/hardware/esp32/1.0.6/tools/sdk/include/freertos/freertos/FreeRTOSConfig.h:120,
                 from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/esp32/hardware/esp32/1.0.6/tools/sdk/include/freertos/freertos/FreeRTOS.h:99,
                 from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/esp32/hardware/esp32/1.0.6/cores/esp32/Arduino.h:32,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AnalogIO-Arduino/src/incl/globalData.h:4,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AnalogIO-Arduino/src/incl/AnalogIn.h:27,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AnalogIO-Arduino/src/incl/AnalogIn.cpp:1:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/esp32/hardware/esp32/1.0.6/tools/sdk/include/soc/soc/soc.h:51:18: error: expected identifier before numeric constant
 #define BIT4     0x00000010
                  ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AnalogIO-Arduino/src/incl/globalData.h:24:5: note: in expansion of macro 'BIT4'
     BIT4 = 4,
     ^
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/esp32/hardware/esp32/1.0.6/tools/sdk/include/soc/soc/soc.h:51:18: error: expected '}' before numeric constant
 #define BIT4     0x00000010
                  ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AnalogIO-Arduino/src/incl/globalData.h:24:5: note: in expansion of macro 'BIT4'
     BIT4 = 4,
     ^
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/esp32/hardware/esp32/1.0.6/tools/sdk/include/soc/soc/soc.h:51:18: error: expecte/home/ec2-user/arduino-testlib/cli-datadir/data/packages/esp32/hardware/esp32/1.0.6/tools/sdk/include/soc/soc/soc.h:51:18: error: expected unqualified-id before numeric constant
 #define BIT4     0x00000010
                  ^
/home/ec2-user/arduino-In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AnalogIO-Arduino/src/incl/AnalogIn.h:27:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AnalogIO-Arduino/src/incl/AnalogIn.cpp:1:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AnalogIO-Arduino/src/incl/globalData.h:29:1: error: expected declaration before '}' token
 } resolution_t;
 ^
ome/ec2-user/arduino-testlib/cli-datadir/user/libraries/AnalogIO-Arduino/src/incl/AnalogController.cpp:1:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AnalogIO-Arduino/src/incl/globalData.h:29:1: error: expected declaration before '}' token
 } resolution_t;
 ^

examples/blinkLed

Result: FAIL

In file included from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/esp32/hardware/esp32/1.0.6/tools/sdk/include/esp32/rom/ets_sys.h:21:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/esp32/hardware/esp32/1.0.6/tools/sdk/include/freertos/freertos/FreeRTOSConfig.h:120,
                 from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/esp32/hardware/esp32/1.0.6/tools/sdk/include/freertos/freertos/FreeRTOS.h:99,
                 from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/esp32/hardware/esp32/1.0.6/cores/esp32/Arduino.h:32,
                 from /tmp/arduino-sketch-EB600F65FA8CFC146663C686C548C265/sketch/blinkLed.ino.cpp:1:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/esp32/hardware/esp32/1.0.6/tools/sdk/include/soc/soc/soc.h:51:18: error: expected identifier before numeric constant
 #define BIT4     0x00000010
                  ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AnalogIO-Arduino/src/incl/globalData.h:24:5: note: in expansion of macro 'BIT4'
     BIT4 = 4,
     ^
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/esp32/hardware/esp32/1.0.6/tools/sdk/include/soc/soc/soc.h:51:18: error: expected '}' before numeric constant
 #define BIT4     0x00000010
                  ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AnalogIO-Arduino/src/incl/globalData.h:24:5: note: in expansion of macro 'BIT4'
     BIT4 = 4,
     ^
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/esp32/hardware/esp32/1.0.6/tools/sdk/include/soc/soc/soc.h:51:18: error: expected unqualified-id before numeric constant
 #define BIT4     0x00000010
                  ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AnalogIO-Arduino/src/incl/globalData.h:24:5: note: in expansion of macro 'BIT4'
     BIT4 = 4,
     ^
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AnalogIO-Arduino/src/incl/AnalogIn.h:27:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AnalogIO-Arduino/src/incl/AnalogController.h:29,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AnalogIO-Arduino/src/AnalogIO.h:26,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AnalogIO-Arduino/examples/blinkLed/blinkLed.ino:8:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AnalogIO-Arduino/src/incl/globalData.h:29:1: error: expected declaration before '}' token
 } resolution_t;
 ^

examples/changeSpeed

Result: FAIL

In file included from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/esp32/hardware/esp32/1.0.6/tools/sdk/include/esp32/rom/ets_sys.h:21:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/esp32/hardware/esp32/1.0.6/tools/sdk/include/freertos/freertos/FreeRTOSConfig.h:120,
                 from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/esp32/hardware/esp32/1.0.6/tools/sdk/include/freertos/freertos/FreeRTOS.h:99,
                 from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/esp32/hardware/esp32/1.0.6/cores/esp32/Arduino.h:32,
                 from /tmp/arduino-sketch-DFC6DA0FB0016BF9DC0EF9D22ABD1A91/sketch/changeSpeed.ino.cpp:1:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/esp32/hardware/esp32/1.0.6/tools/sdk/include/soc/soc/soc.h:51:18: error: expected identifier before numeric constant
 #define BIT4     0x00000010
                  ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AnalogIO-Arduino/src/incl/globalData.h:24:5: note: in expansion of macro 'BIT4'
     BIT4 = 4,
     ^
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/esp32/hardware/esp32/1.0.6/tools/sdk/include/soc/soc/soc.h:51:18: error: expected '}' before numeric constant
 #define BIT4     0x00000010
                  ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AnalogIO-Arduino/src/incl/globalData.h:24:5: note: in expansion of macro 'BIT4'
     BIT4 = 4,
     ^
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/esp32/hardware/esp32/1.0.6/tools/sdk/include/soc/soc/soc.h:51:18: error: expected unqualified-id before numeric constant
 #define BIT4     0x00000010
                  ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AnalogIO-Arduino/src/incl/globalData.h:24:5: note: in expansion of macro 'BIT4'
     BIT4 = 4,
     ^
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AnalogIO-Arduino/src/incl/AnalogIn.h:27:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AnalogIO-Arduino/src/incl/AnalogController.h:29,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AnalogIO-Arduino/src/AnalogIO.h:26,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AnalogIO-Arduino/examples/changeSpeed/changeSpeed.ino:8:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AnalogIO-Arduino/src/incl/globalData.h:29:1: error: expected declaration before '}' token
 } resolution_t;
 ^

examples/controllerLed

Result: FAIL

In file included from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/esp32/hardware/esp32/1.0.6/tools/sdk/include/esp32/rom/ets_sys.h:21:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/esp32/hardware/esp32/1.0.6/tools/sdk/include/freertos/freertos/FreeRTOSConfig.h:120,
                 from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/esp32/hardware/esp32/1.0.6/tools/sdk/include/freertos/freertos/FreeRTOS.h:99,
                 from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/esp32/hardware/esp32/1.0.6/cores/esp32/Arduino.h:32,
                 from /tmp/arduino-sketch-70A657EDE7D236F7F679DC81866FBB8A/sketch/controllerLed.ino.cpp:1:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/esp32/hardware/esp32/1.0.6/tools/sdk/include/soc/soc/soc.h:51:18: error: expected identifier before numeric constant
 #define BIT4     0x00000010
                  ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AnalogIO-Arduino/src/incl/globalData.h:24:5: note: in expansion of macro 'BIT4'
     BIT4 = 4,
     ^
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/esp32/hardware/esp32/1.0.6/tools/sdk/include/soc/soc/soc.h:51:18: error: expected '}' before numeric constant
 #define BIT4     0x00000010
                  ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AnalogIO-Arduino/src/incl/globalData.h:24:5: note: in expansion of macro 'BIT4'
     BIT4 = 4,
     ^
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/esp32/hardware/esp32/1.0.6/tools/sdk/include/soc/soc/soc.h:51:18: error: expected unqualified-id before numeric constant
 #define BIT4     0x00000010
                  ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AnalogIO-Arduino/src/incl/globalData.h:24:5: note: in expansion of macro 'BIT4'
     BIT4 = 4,
     ^
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AnalogIO-Arduino/src/incl/AnalogIn.h:27:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AnalogIO-Arduino/src/incl/AnalogController.h:29,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AnalogIO-Arduino/src/AnalogIO.h:26,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AnalogIO-Arduino/examples/controllerLed/controllerLed.ino:8:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AnalogIO-Arduino/src/incl/globalData.h:29:1: error: expected declaration before '}' token
 } resolution_t;
 ^

examples/controllerLedWithPercent

Result: FAIL

In file included from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/esp32/hardware/esp32/1.0.6/tools/sdk/include/esp32/rom/ets_sys.h:21:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/esp32/hardware/esp32/1.0.6/tools/sdk/include/freertos/freertos/FreeRTOSConfig.h:120,
                 from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/esp32/hardware/esp32/1.0.6/tools/sdk/include/freertos/freertos/FreeRTOS.h:99,
                 from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/esp32/hardware/esp32/1.0.6/cores/esp32/Arduino.h:32,
                 from /tmp/arduino-sketch-D764DFD5ED491CF2F436A5DB312429F2/sketch/controllerLedWithPercent.ino.cpp:1:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/esp32/hardware/esp32/1.0.6/tools/sdk/include/soc/soc/soc.h:51:18: error: expected identifier before numeric constant
 #define BIT4     0x00000010
                  ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AnalogIO-Arduino/src/incl/globalData.h:24:5: note: in expansion of macro 'BIT4'
     BIT4 = 4,
     ^
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/esp32/hardware/esp32/1.0.6/tools/sdk/include/soc/soc/soc.h:51:18: error: expected '}' before numeric constant
 #define BIT4     0x00000010
                  ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AnalogIO-Arduino/src/incl/globalData.h:24:5: note: in expansion of macro 'BIT4'
     BIT4 = 4,
     ^
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/esp32/hardware/esp32/1.0.6/tools/sdk/include/soc/soc/soc.h:51:18: error: expected unqualified-id before numeric constant
 #define BIT4     0x00000010
                  ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AnalogIO-Arduino/src/incl/globalData.h:24:5: note: in expansion of macro 'BIT4'
     BIT4 = 4,
     ^
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AnalogIO-Arduino/src/incl/AnalogIn.h:27:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AnalogIO-Arduino/src/incl/AnalogController.h:29,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AnalogIO-Arduino/src/AnalogIO.h:26,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AnalogIO-Arduino/examples/controllerLedWithPercent/controllerLedWithPercent.ino:8:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AnalogIO-Arduino/src/incl/globalData.h:29:1: error: expected declaration before '}' token
 } resolution_t;
 ^

examples/readFromDevice

Result: FAIL

In file included from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/esp32/hardware/esp32/1.0.6/tools/sdk/include/esp32/rom/ets_sys.h:21:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/esp32/hardware/esp32/1.0.6/tools/sdk/include/freertos/freertos/FreeRTOSConfig.h:120,
                 from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/esp32/hardware/esp32/1.0.6/tools/sdk/include/freertos/freertos/FreeRTOS.h:99,
                 from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/esp32/hardware/esp32/1.0.6/cores/esp32/Arduino.h:32,
                 from /tmp/arduino-sketch-5F732D81B897A46983D219D61FC8611D/sketch/readFromDevice.ino.cpp:1:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/esp32/hardware/esp32/1.0.6/tools/sdk/include/soc/soc/soc.h:51:18: error: expected identifier before numeric constant
 #define BIT4     0x00000010
                  ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AnalogIO-Arduino/src/incl/globalData.h:24:5: note: in expansion of macro 'BIT4'
     BIT4 = 4,
     ^
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/esp32/hardware/esp32/1.0.6/tools/sdk/include/soc/soc/soc.h:51:18: error: expected '}' before numeric constant
 #define BIT4     0x00000010
                  ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AnalogIO-Arduino/src/incl/globalData.h:24:5: note: in expansion of macro 'BIT4'
     BIT4 = 4,
     ^
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/esp32/hardware/esp32/1.0.6/tools/sdk/include/soc/soc/soc.h:51:18: error: expected unqualified-id before numeric constant
 #define BIT4     0x00000010
                  ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AnalogIO-Arduino/src/incl/globalData.h:24:5: note: in expansion of macro 'BIT4'
     BIT4 = 4,
     ^
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AnalogIO-Arduino/src/incl/AnalogIn.h:27:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AnalogIO-Arduino/src/incl/AnalogController.h:29,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AnalogIO-Arduino/src/AnalogIO.h:26,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AnalogIO-Arduino/examples/readFromDevice/readFromDevice.ino:8:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AnalogIO-Arduino/src/incl/globalData.h:29:1: error: expected declaration before '}' token
 } resolution_t;
 ^

examples/writeToDevice

Result: FAIL

In file included from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/esp32/hardware/esp32/1.0.6/tools/sdk/include/esp32/rom/ets_sys.h:21:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/esp32/hardware/esp32/1.0.6/tools/sdk/include/freertos/freertos/FreeRTOSConfig.h:120,
                 from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/esp32/hardware/esp32/1.0.6/tools/sdk/include/freertos/freertos/FreeRTOS.h:99,
                 from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/esp32/hardware/esp32/1.0.6/cores/esp32/Arduino.h:32,
                 from /tmp/arduino-sketch-2EC311B2EFC67B392D3827DEB2D5BB00/sketch/writeToDevice.ino.cpp:1:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/esp32/hardware/esp32/1.0.6/tools/sdk/include/soc/soc/soc.h:51:18: error: expected identifier before numeric constant
 #define BIT4     0x00000010
                  ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AnalogIO-Arduino/src/incl/globalData.h:24:5: note: in expansion of macro 'BIT4'
     BIT4 = 4,
     ^
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/esp32/hardware/esp32/1.0.6/tools/sdk/include/soc/soc/soc.h:51:18: error: expected '}' before numeric constant
 #define BIT4     0x00000010
                  ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AnalogIO-Arduino/src/incl/globalData.h:24:5: note: in expansion of macro 'BIT4'
     BIT4 = 4,
     ^
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/esp32/hardware/esp32/1.0.6/tools/sdk/include/soc/soc/soc.h:51:18: error: expected unqualified-id before numeric constant
 #define BIT4     0x00000010
                  ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AnalogIO-Arduino/src/incl/globalData.h:24:5: note: in expansion of macro 'BIT4'
     BIT4 = 4,
     ^
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AnalogIO-Arduino/src/incl/AnalogIn.h:27:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AnalogIO-Arduino/src/incl/AnalogController.h:29,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AnalogIO-Arduino/src/AnalogIO.h:26,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AnalogIO-Arduino/examples/writeToDevice/writeToDevice.ino:8:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AnalogIO-Arduino/src/incl/globalData.h:29:1: error: expected declaration before '}' token
 } resolution_t;
 ^