Arduino_MCHPTouch - compatibility matrix

This report was generated on Wednesday, 23-Feb-22 22:48:15 CET using arduino-testlib.

Arduino_MCHPTouch

Version: 1.2.1
More details

Compatibility matrix

Board Claims compatibility Inclusion 
ReadSensors
 
setCustomSensitivity
arduino:avr:uno
1.8.4 		No FAIL FAIL FAIL
arduino:mbed_nano:nanorp2040connect
2.7.2 		No FAIL FAIL FAIL
arduino:megaavr:nona4809
1.8.7 		No FAIL FAIL FAIL
arduino:samd:mkrwifi1010
1.8.12 		Yes PASS PASS PASS
esp32:esp32:d1_mini32
1.0.6 		No FAIL FAIL FAIL

Compilation logs

arduino:avr:uno @ 1.8.4

Inclusion

Result: FAIL 

WARNING: library Arduino_MCHPTouch claims to run on samd architecture(s) and may be incompatible with your current board which runs on avr architecture(s).
Library Arduino_MCHPTouch has been declared precompiled:
Precompiled library in "/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/Arduino_MCHPTouch/src/atmega328p" not found
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/Arduino_MCHPTouch/src/touch.c: In function 'touch_configure_ptc_clock':
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/Arduino_MCHPTouch/src/touch.c:209:20: error: 'PTC_GCLK_ID' undeclared (first use in this function)
  uint8_t channel = PTC_GCLK_ID;
                    ^~~~~~~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/Arduino_MCHPTouch/src/touch.c:209:20: note: each undeclared identifier is reported only once for each function it appears in
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/Arduino_MCHPTouch/src/touch.c:212:44: error: 'GCLK_CLKCTRL_ID_Pos' undeclared (first use in this function)
  uint32_t new_clkctrl_config = (channel << GCLK_CLKCTRL_ID_Pos);
                                            ^~~~~~~~~~~~~~~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/Arduino_MCHPTouch/src/touch.c:213:44: error: 'GCLK_CLKCTRL_GEN_Pos' undeclared (first use in this function); did you mean 'GCLK_CLKCTRL_ID_Pos'?
  new_clkctrl_config |= source_generator << GCLK_CLKCTRL_GEN_Pos;
                                            ^~~~~~~~~~~~~~~~~~~~
                                            GCLK_CLKCTRL_ID_Pos
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/Arduino_MCHPTouch/src/touch.c:219:15: error: 'GCLK' undeclared (first use in this function); did you mean 'SCL'?
  *((uint8_t*)&GCLK->CLKCTRL.reg) = channel;
               ^~~~
               SCL
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/Arduino_MCHPTouch/src/touch.c:226:24: error: 'GCLK_CLKCTRL_CLKEN' undeclared (first use in this function); did you mean 'GCLK_CLKCTRL_ID_Pos'?
  GCLK->CLKCTRL.reg &= ~GCLK_CLKCTRL_CLKEN;
                        ^~~~~~~~~~~~~~~~~~
                        GCLK_CLKCTRL_ID_Pos
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/Arduino_MCHPTouch/src/touch.c:245:2: error: 'PM' undeclared (first use in this function); did you mean 'PI'?
  PM->APBCMASK.reg |= PM_APBCMASK_PTC;
  ^~
  PI
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/Arduino_MCHPTouch/src/touch.c:245:22: error: 'PM_APBCMASK_PTC' undeclared (first use in this function)
  PM->APBCMASK.reg |= PM_APBCMASK_PTC;
                      ^~~~~~~~~~~~~~~

examples/ReadSensors

Result: FAIL 

WARNING: library Arduino_MCHPTouch claims to run on samd architecture(s) and may be incompatible with your current board which runs on avr architecture(s).
Library Arduino_MCHPTouch has been declared precompiled:
Precompiled library in "/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/Arduino_MCHPTouch/src/atmega328p" not found
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/Arduino_MCHPTouch/src/touch.c: In function 'touch_configure_ptc_clock':
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/Arduino_MCHPTouch/src/touch.c:209:20: error: 'PTC_GCLK_ID' undeclared (first use in this function)
  uint8_t channel = PTC_GCLK_ID;
                    ^~~~~~~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/Arduino_MCHPTouch/src/touch.c:209:20: note: each undeclared identifier is reported only once for each function it appears in
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/Arduino_MCHPTouch/src/touch.c:212:44: error: 'GCLK_CLKCTRL_ID_Pos' undeclared (first use in this function)
  uint32_t new_clkctrl_config = (channel << GCLK_CLKCTRL_ID_Pos);
                                            ^~~~~~~~~~~~~~~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/Arduino_MCHPTouch/src/touch.c:213:44: error: 'GCLK_CLKCTRL_GEN_Pos' undeclared (first use in this function); did you mean 'GCLK_CLKCTRL_ID_Pos'?
  new_clkctrl_config |= source_generator << GCLK_CLKCTRL_GEN_Pos;
                                            ^~~~~~~~~~~~~~~~~~~~
                                            GCLK_CLKCTRL_ID_Pos
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/Arduino_MCHPTouch/src/touch.c:219:15: error: 'GCLK' undeclared (first use in this function); did you mean 'SCL'?
  *((uint8_t*)&GCLK->CLKCTRL.reg) = channel;
               ^~~~
               SCL
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/Arduino_MCHPTouch/src/touch.c:226:24: error: 'GCLK_CLKCTRL_CLKEN' undeclared (first use in this function); did you mean 'GCLK_CLKCTRL_ID_Pos'?
  GCLK->CLKCTRL.reg &= ~GCLK_CLKCTRL_CLKEN;
                        ^~~~~~~~~~~~~~~~~~
                        GCLK_CLKCTRL_ID_Pos
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/Arduino_MCHPTouch/src/touch.c:245:2: error: 'PM' undeclared (first use in this function); did you mean 'PI'?
  PM->APBCMASK.reg |= PM_APBCMASK_PTC;
  ^~
  PI
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/Arduino_MCHPTouch/src/touch.c:245:22: error: 'PM_APBCMASK_PTC' undeclared (first use in this function)
  PM->APBCMASK.reg |= PM_APBCMASK_PTC;
                      ^~~~~~~~~~~~~~~

examples/setCustomSensitivity

Result: FAIL 

WARNING: library Arduino_MCHPTouch claims to run on samd architecture(s) and may be incompatible with your current board which runs on avr architecture(s).
Library Arduino_MCHPTouch has been declared precompiled:
Precompiled library in "/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/Arduino_MCHPTouch/src/atmega328p" not found
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/Arduino_MCHPTouch/src/touch.c: In function 'touch_configure_ptc_clock':
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/Arduino_MCHPTouch/src/touch.c:209:20: error: 'PTC_GCLK_ID' undeclared (first use in this function)
  uint8_t channel = PTC_GCLK_ID;
                    ^~~~~~~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/Arduino_MCHPTouch/src/touch.c:209:20: note: each undeclared identifier is reported only once for each function it appears in
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/Arduino_MCHPTouch/src/touch.c:212:44: error: 'GCLK_CLKCTRL_ID_Pos' undeclared (first use in this function)
  uint32_t new_clkctrl_config = (channel << GCLK_CLKCTRL_ID_Pos);
                                            ^~~~~~~~~~~~~~~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/Arduino_MCHPTouch/src/touch.c:213:44: error: 'GCLK_CLKCTRL_GEN_Pos' undeclared (first use in this function); did you mean 'GCLK_CLKCTRL_ID_Pos'?
  new_clkctrl_config |= source_generator << GCLK_CLKCTRL_GEN_Pos;
                                            ^~~~~~~~~~~~~~~~~~~~
                                            GCLK_CLKCTRL_ID_Pos
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/Arduino_MCHPTouch/src/touch.c:219:15: error: 'GCLK' undeclared (first use in this function); did you mean 'SCL'?
  *((uint8_t*)&GCLK->CLKCTRL.reg) = channel;
               ^~~~
               SCL
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/Arduino_MCHPTouch/src/touch.c:226:24: error: 'GCLK_CLKCTRL_CLKEN' undeclared (first use in this function); did you mean 'GCLK_CLKCTRL_ID_Pos'?
  GCLK->CLKCTRL.reg &= ~GCLK_CLKCTRL_CLKEN;
                        ^~~~~~~~~~~~~~~~~~
                        GCLK_CLKCTRL_ID_Pos
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/Arduino_MCHPTouch/src/touch.c:245:2: error: 'PM' undeclared (first use in this function); did you mean 'PI'?
  PM->APBCMASK.reg |= PM_APBCMASK_PTC;
  ^~
  PI
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/Arduino_MCHPTouch/src/touch.c:245:22: error: 'PM_APBCMASK_PTC' undeclared (first use in this function)
  PM->APBCMASK.reg |= PM_APBCMASK_PTC;
                      ^~~~~~~~~~~~~~~

arduino:mbed_nano:nanorp2040connect @ 2.7.2

Inclusion

Result: FAIL 

WARNING: library Arduino_MCHPTouch claims to run on samd architecture(s) and may be incompatible with your current board which runs on mbed_nano architecture(s).
Library Arduino_MCHPTouch has been declared precompiled:
Using precompiled library in /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Arduino_MCHPTouch/src/cortex-m0plus
In file included from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/variants/NANO_RP2040_CONNECT/pinmode_arduino.h:30:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/cores/arduino/Arduino.h:26,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Arduino_MCHPTouch/src/touch.c:47:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/cores/arduino/api/Common.h:76:9: error: unknown type name 'bool'
 typedef bool      boolean;
         ^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Arduino_MCHPTouch/src/touch.c: In function 'touch_configure_ptc_clock':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Arduino_MCHPTouch/src/touch.c:209:20: error: 'PTC_GCLK_ID' undeclared (first use in this function)
  uint8_t channel = PTC_GCLK_ID;
                    ^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Arduino_MCHPTouch/src/touch.c:209:20: note: each undeclared identifier is reported only once for each function it appears in
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Arduino_MCHPTouch/src/touch.c:212:44: error: 'GCLK_CLKCTRL_ID_Pos' undeclared (first use in this function)
  uint32_t new_clkctrl_config = (channel << GCLK_CLKCTRL_ID_Pos);
                                            ^~~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Arduino_MCHPTouch/src/touch.c:213:44: error: 'GCLK_CLKCTRL_GEN_Pos' undeclared (first use in this function); did you mean 'GCLK_CLKCTRL_ID_Pos'?
  new_clkctrl_config |= source_generator << GCLK_CLKCTRL_GEN_Pos;
                                            ^~~~~~~~~~~~~~~~~~~~
                                            GCLK_CLKCTRL_ID_Pos
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Arduino_MCHPTouch/src/touch.c:219:15: error: 'GCLK' undeclared (first use in this function); did you mean 'SCK'?
  *((uint8_t*)&GCLK->CLKCTRL.reg) = channel;
               ^~~~
               SCK
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Arduino_MCHPTouch/src/touch.c:226:24: error: 'GCLK_CLKCTRL_CLKEN' undeclared (first use in this function); did you mean 'GCLK_CLKCTRL_ID_Pos'?
  GCLK->CLKCTRL.reg &= ~GCLK_CLKCTRL_CLKEN;
                        ^~~~~~~~~~~~~~~~~~
                        GCLK_CLKCTRL_ID_Pos
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Arduino_MCHPTouch/src/touch.c:245:2: error: 'PM' undeclared (first use in this function); did you mean 'PI'?
  PM->APBCMASK.reg |= PM_APBCMASK_PTC;
  ^~
  PI
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Arduino_MCHPTouch/src/touch.c:245:22: error: 'PM_APBCMASK_PTC' undeclared (first use in this function)
  PM->APBCMASK.reg |= PM_APBCMASK_PTC;
                      ^~~~~~~~~~~~~~~

examples/ReadSensors

Result: FAIL 

WARNING: library Arduino_MCHPTouch claims to run on samd architecture(s) and may be incompatible with your current board which runs on mbed_nano architecture(s).
Library Arduino_MCHPTouch has been declared precompiled:
Using precompiled library in /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Arduino_MCHPTouch/src/cortex-m0plus
In file included from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/variants/NANO_RP2040_CONNECT/pinmode_arduino.h:30:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/cores/arduino/Arduino.h:26,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Arduino_MCHPTouch/src/touch.c:47:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/cores/arduino/api/Common.h:76:9: error: unknown type name 'bool'
 typedef bool      boolean;
         ^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Arduino_MCHPTouch/src/touch.c: In function 'touch_configure_ptc_clock':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Arduino_MCHPTouch/src/touch.c:209:20: error: 'PTC_GCLK_ID' undeclared (first use in this function)
  uint8_t channel = PTC_GCLK_ID;
                    ^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Arduino_MCHPTouch/src/touch.c:209:20: note: each undeclared identifier is reported only once for each function it appears in
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Arduino_MCHPTouch/src/touch.c:212:44: error: 'GCLK_CLKCTRL_ID_Pos' undeclared (first use in this function)
  uint32_t new_clkctrl_config = (channel << GCLK_CLKCTRL_ID_Pos);
                                            ^~~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Arduino_MCHPTouch/src/touch.c:213:44: error: 'GCLK_CLKCTRL_GEN_Pos' undeclared (first use in this function); did you mean 'GCLK_CLKCTRL_ID_Pos'?
  new_clkctrl_config |= source_generator << GCLK_CLKCTRL_GEN_Pos;
                                            ^~~~~~~~~~~~~~~~~~~~
                                            GCLK_CLKCTRL_ID_Pos
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Arduino_MCHPTouch/src/touch.c:219:15: error: 'GCLK' undeclared (first use in this function); did you mean 'SCK'?
  *((uint8_t*)&GCLK->CLKCTRL.reg) = channel;
               ^~~~
               SCK
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Arduino_MCHPTouch/src/touch.c:226:24: error: 'GCLK_CLKCTRL_CLKEN' undeclared (first use in this function); did you mean 'GCLK_CLKCTRL_ID_Pos'?
  GCLK->CLKCTRL.reg &= ~GCLK_CLKCTRL_CLKEN;
                        ^~~~~~~~~~~~~~~~~~
                        GCLK_CLKCTRL_ID_Pos
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Arduino_MCHPTouch/src/touch.c:245:2: error: 'PM' undeclared (first use in this function); did you mean 'PI'?
  PM->APBCMASK.reg |= PM_APBCMASK_PTC;
  ^~
  PI
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Arduino_MCHPTouch/src/touch.c:245:22: error: 'PM_APBCMASK_PTC' undeclared (first use in this function)
  PM->APBCMASK.reg |= PM_APBCMASK_PTC;
                      ^~~~~~~~~~~~~~~

examples/setCustomSensitivity

Result: FAIL 

WARNING: library Arduino_MCHPTouch claims to run on samd architecture(s) and may be incompatible with your current board which runs on mbed_nano architecture(s).
Library Arduino_MCHPTouch has been declared precompiled:
Using precompiled library in /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Arduino_MCHPTouch/src/cortex-m0plus
In file included from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/variants/NANO_RP2040_CONNECT/pinmode_arduino.h:30:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/cores/arduino/Arduino.h:26,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Arduino_MCHPTouch/src/touch.c:47:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/cores/arduino/api/Common.h:76:9: error: unknown type name 'bool'
 typedef bool      boolean;
         ^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Arduino_MCHPTouch/src/touch.c: In function 'touch_configure_ptc_clock':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Arduino_MCHPTouch/src/touch.c:209:20: error: 'PTC_GCLK_ID' undeclared (first use in this function)
  uint8_t channel = PTC_GCLK_ID;
                    ^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Arduino_MCHPTouch/src/touch.c:209:20: note: each undeclared identifier is reported only once for each function it appears in
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Arduino_MCHPTouch/src/touch.c:212:44: error: 'GCLK_CLKCTRL_ID_Pos' undeclared (first use in this function)
  uint32_t new_clkctrl_config = (channel << GCLK_CLKCTRL_ID_Pos);
                                            ^~~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Arduino_MCHPTouch/src/touch.c:213:44: error: 'GCLK_CLKCTRL_GEN_Pos' undeclared (first use in this function); did you mean 'GCLK_CLKCTRL_ID_Pos'?
  new_clkctrl_config |= source_generator << GCLK_CLKCTRL_GEN_Pos;
                                            ^~~~~~~~~~~~~~~~~~~~
                                            GCLK_CLKCTRL_ID_Pos
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Arduino_MCHPTouch/src/touch.c:219:15: error: 'GCLK' undeclared (first use in this function); did you mean 'SCK'?
  *((uint8_t*)&GCLK->CLKCTRL.reg) = channel;
               ^~~~
               SCK
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Arduino_MCHPTouch/src/touch.c:226:24: error: 'GCLK_CLKCTRL_CLKEN' undeclared (first use in this function); did you mean 'GCLK_CLKCTRL_ID_Pos'?
  GCLK->CLKCTRL.reg &= ~GCLK_CLKCTRL_CLKEN;
                        ^~~~~~~~~~~~~~~~~~
                        GCLK_CLKCTRL_ID_Pos
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Arduino_MCHPTouch/src/touch.c:245:2: error: 'PM' undeclared (first use in this function); did you mean 'PI'?
  PM->APBCMASK.reg |= PM_APBCMASK_PTC;
  ^~
  PI
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Arduino_MCHPTouch/src/touch.c:245:22: error: 'PM_APBCMASK_PTC' undeclared (first use in this function)
  PM->APBCMASK.reg |= PM_APBCMASK_PTC;
                      ^~~~~~~~~~~~~~~

arduino:megaavr:nona4809 @ 1.8.7

Inclusion

Result: FAIL 

WARNING: library Arduino_MCHPTouch claims to run on samd architecture(s) and may be incompatible with your current board which runs on megaavr architecture(s).
Library Arduino_MCHPTouch has been declared precompiled:
Precompiled library in "/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Arduino_MCHPTouch/src/atmega4809" not found
The platform does not support 'compiler.libraries.ldflags' for precompiled libraries.
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Arduino_MCHPTouch/src/touch.c: In function 'touch_configure_ptc_clock':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Arduino_MCHPTouch/src/touch.c:209:20: error: 'PTC_GCLK_ID' undeclared (first use in this function); did you mean 'RTC_CLKSEL'?
  uint8_t channel = PTC_GCLK_ID;
                    ^~~~~~~~~~~
                    RTC_CLKSEL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Arduino_MCHPTouch/src/touch.c:209:20: note: each undeclared identifier is reported only once for each function it appears in
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Arduino_MCHPTouch/src/touch.c:212:44: error: 'GCLK_CLKCTRL_ID_Pos' undeclared (first use in this function)
  uint32_t new_clkctrl_config = (channel << GCLK_CLKCTRL_ID_Pos);
                                            ^~~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Arduino_MCHPTouch/src/touch.c:213:44: error: 'GCLK_CLKCTRL_GEN_Pos' undeclared (first use in this function); did you mean 'GCLK_CLKCTRL_ID_Pos'?
  new_clkctrl_config |= source_generator << GCLK_CLKCTRL_GEN_Pos;
                                            ^~~~~~~~~~~~~~~~~~~~
                                            GCLK_CLKCTRL_ID_Pos
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Arduino_MCHPTouch/src/touch.c:219:15: error: 'GCLK' undeclared (first use in this function); did you mean 'SCL'?
  *((uint8_t*)&GCLK->CLKCTRL.reg) = channel;
               ^~~~
               SCL
In file included from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/tools/avr-gcc/7.3.0-atmel3.6.1-arduino5/avr/include/avr/io.h:677:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/tools/avr-gcc/7.3.0-atmel3.6.1-arduino5/avr/include/avr/pgmspace.h:90,
                 from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/cores/arduino/Arduino.h:25,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Arduino_MCHPTouch/src/touch.c:47:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Arduino_MCHPTouch/src/touch.c:219:21: error: expected identifier before '(' token
  *((uint8_t*)&GCLK->CLKCTRL.reg) = channel;
                     ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Arduino_MCHPTouch/src/touch.c:222:31: error: expected identifier before '(' token
  uint32_t prev_gen_id = GCLK->CLKCTRL.bit.GEN;
                               ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Arduino_MCHPTouch/src/touch.c:223:8: error: expected identifier before '(' token
  GCLK->CLKCTRL.bit.GEN = 0;
        ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Arduino_MCHPTouch/src/touch.c:226:8: error: expected identifier before '(' token
  GCLK->CLKCTRL.reg &= ~GCLK_CLKCTRL_CLKEN;
        ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Arduino_MCHPTouch/src/touch.c:229:15: error: expected identifier before '(' token
  while (GCLK->CLKCTRL.reg & GCLK_CLKCTRL_CLKEN);
               ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Arduino_MCHPTouch/src/touch.c:232:8: error: expected identifier before '(' token
  GCLK->CLKCTRL.bit.GEN = prev_gen_id;
        ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Arduino_MCHPTouch/src/touch.c:238:8: error: expected identifier before '(' token
  GCLK->CLKCTRL.reg = new_clkctrl_config;
        ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Arduino_MCHPTouch/src/touch.c:240:21: error: expected identifier before '(' token
  *((uint8_t*)&GCLK->CLKCTRL.reg) = channel;
                     ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Arduino_MCHPTouch/src/touch.c:243:8: error: expected identifier before '(' token
  GCLK->CLKCTRL.reg |= GCLK_CLKCTRL_CLKEN;
        ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Arduino_MCHPTouch/src/touch.c:245:2: error: 'PM' undeclared (first use in this function); did you mean 'PE'?
  PM->APBCMASK.reg |= PM_APBCMASK_PTC;
  ^~
  PE
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Arduino_MCHPTouch/src/touch.c:245:22: error: 'PM_APBCMASK_PTC' undeclared (first use in this function)
  PM->APBCMASK.reg |= PM_APBCMASK_PTC;
                      ^~~~~~~~~~~~~~~

examples/ReadSensors

Result: FAIL 

WARNING: library Arduino_MCHPTouch claims to run on samd architecture(s) and may be incompatible with your current board which runs on megaavr architecture(s).
Library Arduino_MCHPTouch has been declared precompiled:
Precompiled library in "/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Arduino_MCHPTouch/src/atmega4809" not found
The platform does not support 'compiler.libraries.ldflags' for precompiled libraries.
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Arduino_MCHPTouch/src/touch.c: In function 'touch_configure_ptc_clock':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Arduino_MCHPTouch/src/touch.c:209:20: error: 'PTC_GCLK_ID' undeclared (first use in this function); did you mean 'RTC_CLKSEL'?
  uint8_t channel = PTC_GCLK_ID;
                    ^~~~~~~~~~~
                    RTC_CLKSEL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Arduino_MCHPTouch/src/touch.c:209:20: note: each undeclared identifier is reported only once for each function it appears in
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Arduino_MCHPTouch/src/touch.c:212:44: error: 'GCLK_CLKCTRL_ID_Pos' undeclared (first use in this function)
  uint32_t new_clkctrl_config = (channel << GCLK_CLKCTRL_ID_Pos);
                                            ^~~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Arduino_MCHPTouch/src/touch.c:213:44: error: 'GCLK_CLKCTRL_GEN_Pos' undeclared (first use in this function); did you mean 'GCLK_CLKCTRL_ID_Pos'?
  new_clkctrl_config |= source_generator << GCLK_CLKCTRL_GEN_Pos;
                                            ^~~~~~~~~~~~~~~~~~~~
                                            GCLK_CLKCTRL_ID_Pos
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Arduino_MCHPTouch/src/touch.c:219:15: error: 'GCLK' undeclared (first use in this function); did you mean 'SCL'?
  *((uint8_t*)&GCLK->CLKCTRL.reg) = channel;
               ^~~~
               SCL
In file included from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/tools/avr-gcc/7.3.0-atmel3.6.1-arduino5/avr/include/avr/io.h:677:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/tools/avr-gcc/7.3.0-atmel3.6.1-arduino5/avr/include/avr/pgmspace.h:90,
                 from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/cores/arduino/Arduino.h:25,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Arduino_MCHPTouch/src/touch.c:47:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Arduino_MCHPTouch/src/touch.c:219:21: error: expected identifier before '(' token
  *((uint8_t*)&GCLK->CLKCTRL.reg) = channel;
                     ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Arduino_MCHPTouch/src/touch.c:222:31: error: expected identifier before '(' token
  uint32_t prev_gen_id = GCLK->CLKCTRL.bit.GEN;
                               ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Arduino_MCHPTouch/src/touch.c:223:8: error: expected identifier before '(' token
  GCLK->CLKCTRL.bit.GEN = 0;
        ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Arduino_MCHPTouch/src/touch.c:226:8: error: expected identifier before '(' token
  GCLK->CLKCTRL.reg &= ~GCLK_CLKCTRL_CLKEN;
        ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Arduino_MCHPTouch/src/touch.c:229:15: error: expected identifier before '(' token
  while (GCLK->CLKCTRL.reg & GCLK_CLKCTRL_CLKEN);
               ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Arduino_MCHPTouch/src/touch.c:232:8: error: expected identifier before '(' token
  GCLK->CLKCTRL.bit.GEN = prev_gen_id;
        ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Arduino_MCHPTouch/src/touch.c:238:8: error: expected identifier before '(' token
  GCLK->CLKCTRL.reg = new_clkctrl_config;
        ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Arduino_MCHPTouch/src/touch.c:240:21: error: expected identifier before '(' token
  *((uint8_t*)&GCLK->CLKCTRL.reg) = channel;
                     ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Arduino_MCHPTouch/src/touch.c:243:8: error: expected identifier before '(' token
  GCLK->CLKCTRL.reg |= GCLK_CLKCTRL_CLKEN;
        ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Arduino_MCHPTouch/src/touch.c:245:2: error: 'PM' undeclared (first use in this function); did you mean 'PE'?
  PM->APBCMASK.reg |= PM_APBCMASK_PTC;
  ^~
  PE
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Arduino_MCHPTouch/src/touch.c:245:22: error: 'PM_APBCMASK_PTC' undeclared (first use in this function)
  PM->APBCMASK.reg |= PM_APBCMASK_PTC;
                      ^~~~~~~~~~~~~~~

examples/setCustomSensitivity

Result: FAIL 

WARNING: library Arduino_MCHPTouch claims to run on samd architecture(s) and may be incompatible with your current board which runs on megaavr architecture(s).
Library Arduino_MCHPTouch has been declared precompiled:
Precompiled library in "/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Arduino_MCHPTouch/src/atmega4809" not found
The platform does not support 'compiler.libraries.ldflags' for precompiled libraries.
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Arduino_MCHPTouch/src/touch.c: In function 'touch_configure_ptc_clock':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Arduino_MCHPTouch/src/touch.c:209:20: error: 'PTC_GCLK_ID' undeclared (first use in this function); did you mean 'RTC_CLKSEL'?
  uint8_t channel = PTC_GCLK_ID;
                    ^~~~~~~~~~~
                    RTC_CLKSEL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Arduino_MCHPTouch/src/touch.c:209:20: note: each undeclared identifier is reported only once for each function it appears in
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Arduino_MCHPTouch/src/touch.c:212:44: error: 'GCLK_CLKCTRL_ID_Pos' undeclared (first use in this function)
  uint32_t new_clkctrl_config = (channel << GCLK_CLKCTRL_ID_Pos);
                                            ^~~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Arduino_MCHPTouch/src/touch.c:213:44: error: 'GCLK_CLKCTRL_GEN_Pos' undeclared (first use in this function); did you mean 'GCLK_CLKCTRL_ID_Pos'?
  new_clkctrl_config |= source_generator << GCLK_CLKCTRL_GEN_Pos;
                                            ^~~~~~~~~~~~~~~~~~~~
                                            GCLK_CLKCTRL_ID_Pos
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Arduino_MCHPTouch/src/touch.c:219:15: error: 'GCLK' undeclared (first use in this function); did you mean 'SCL'?
  *((uint8_t*)&GCLK->CLKCTRL.reg) = channel;
               ^~~~
               SCL
In file included from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/tools/avr-gcc/7.3.0-atmel3.6.1-arduino5/avr/include/avr/io.h:677:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/tools/avr-gcc/7.3.0-atmel3.6.1-arduino5/avr/include/avr/pgmspace.h:90,
                 from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/cores/arduino/Arduino.h:25,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Arduino_MCHPTouch/src/touch.c:47:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Arduino_MCHPTouch/src/touch.c:219:21: error: expected identifier before '(' token
  *((uint8_t*)&GCLK->CLKCTRL.reg) = channel;
                     ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Arduino_MCHPTouch/src/touch.c:222:31: error: expected identifier before '(' token
  uint32_t prev_gen_id = GCLK->CLKCTRL.bit.GEN;
                               ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Arduino_MCHPTouch/src/touch.c:223:8: error: expected identifier before '(' token
  GCLK->CLKCTRL.bit.GEN = 0;
        ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Arduino_MCHPTouch/src/touch.c:226:8: error: expected identifier before '(' token
  GCLK->CLKCTRL.reg &= ~GCLK_CLKCTRL_CLKEN;
        ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Arduino_MCHPTouch/src/touch.c:229:15: error: expected identifier before '(' token
  while (GCLK->CLKCTRL.reg & GCLK_CLKCTRL_CLKEN);
               ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Arduino_MCHPTouch/src/touch.c:232:8: error: expected identifier before '(' token
  GCLK->CLKCTRL.bit.GEN = prev_gen_id;
        ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Arduino_MCHPTouch/src/touch.c:238:8: error: expected identifier before '(' token
  GCLK->CLKCTRL.reg = new_clkctrl_config;
        ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Arduino_MCHPTouch/src/touch.c:240:21: error: expected identifier before '(' token
  *((uint8_t*)&GCLK->CLKCTRL.reg) = channel;
                     ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Arduino_MCHPTouch/src/touch.c:243:8: error: expected identifier before '(' token
  GCLK->CLKCTRL.reg |= GCLK_CLKCTRL_CLKEN;
        ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Arduino_MCHPTouch/src/touch.c:245:2: error: 'PM' undeclared (first use in this function); did you mean 'PE'?
  PM->APBCMASK.reg |= PM_APBCMASK_PTC;
  ^~
  PE
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Arduino_MCHPTouch/src/touch.c:245:22: error: 'PM_APBCMASK_PTC' undeclared (first use in this function)
  PM->APBCMASK.reg |= PM_APBCMASK_PTC;
                      ^~~~~~~~~~~~~~~

arduino:samd:mkrwifi1010 @ 1.8.12

Inclusion

Result: PASS 

Library Arduino_MCHPTouch has been declared precompiled:
Using precompiled library in /Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/Arduino_MCHPTouch/src/cortex-m0plus
Sketch uses 19256 bytes (7%) of program storage space. Maximum is 262144 bytes.
Global variables use 3140 bytes (9%) of dynamic memory, leaving 29628 bytes for local variables. Maximum is 32768 bytes.

examples/ReadSensors

Result: PASS 

Library Arduino_MCHPTouch has been declared precompiled:
Using precompiled library in /Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/Arduino_MCHPTouch/src/cortex-m0plus
Sketch uses 21720 bytes (8%) of program storage space. Maximum is 262144 bytes.
Global variables use 3692 bytes (11%) of dynamic memory, leaving 29076 bytes for local variables. Maximum is 32768 bytes.

examples/setCustomSensitivity

Result: PASS 

Library Arduino_MCHPTouch has been declared precompiled:
Using precompiled library in /Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/Arduino_MCHPTouch/src/cortex-m0plus
Sketch uses 21756 bytes (8%) of program storage space. Maximum is 262144 bytes.
Global variables use 3692 bytes (11%) of dynamic memory, leaving 29076 bytes for local variables. Maximum is 32768 bytes.

esp32:esp32:d1_mini32 @ 1.0.6

Inclusion

Result: FAIL 

WARNING: library Arduino_MCHPTouch claims to run on samd architecture(s) and may be incompatible with your current board which runs on esp32 architecture(s).
Library Arduino_MCHPTouch has been declared precompiled:
Precompiled library in "/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Arduino_MCHPTouch/src/esp32" not found

examples/ReadSensors

Result: FAIL 

WARNING: library Arduino_MCHPTouch claims to run on samd architecture(s) and may be incompatible with your current board which runs on esp32 architecture(s).
Library Arduino_MCHPTouch has been declared precompiled:
Precompiled library in "/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Arduino_MCHPTouch/src/esp32" not found

examples/setCustomSensitivity

Result: FAIL 

WARNING: library Arduino_MCHPTouch claims to run on samd architecture(s) and may be incompatible with your current board which runs on esp32 architecture(s).
Library Arduino_MCHPTouch has been declared precompiled:
Precompiled library in "/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Arduino_MCHPTouch/src/esp32" not found