This report was generated on Wednesday, 23-Feb-22 22:48:15 CET using arduino-testlib.
Version: 1.0.2
More details
| Board | Claims compatibility | Inclusion | SD_card |
Sensors |
TouchPads |
Actuators |
All_Features |
Display |
Grove_Inputs |
LEDs-Examples |
|---|---|---|---|---|---|---|---|---|---|---|
|
arduino:avr:uno
1.8.4 |
No | FAIL | FAIL | FAIL | FAIL | FAIL | FAIL | FAIL | FAIL | FAIL |
|
arduino:mbed_nano:nanorp2040connect
2.7.2 |
No | FAIL | FAIL | FAIL | FAIL | FAIL | FAIL | FAIL | FAIL | FAIL |
|
arduino:megaavr:nona4809
1.8.7 |
No | FAIL | FAIL | FAIL | FAIL | FAIL | FAIL | FAIL | FAIL | FAIL |
|
arduino:samd:mkrwifi1010
1.8.12 |
Yes | PASS | PASS | FAIL | FAIL | FAIL | PASS | FAIL | PASS | FAIL |
|
esp32:esp32:d1_mini32
1.0.6 |
No | FAIL | FAIL | FAIL | FAIL | FAIL | FAIL | FAIL | FAIL | FAIL |
Result: FAIL
WARNING: library Arduino_MKRIoTCarrier claims to run on samd architecture(s) and may be incompatible with your current board which runs on avr architecture(s).
WARNING: library Arduino_BQ24195 claims to run on samd architecture(s) and may be incompatible with your current board which runs on avr architecture(s).
WARNING: library Arduino_MCHPTouch claims to run on samd architecture(s) and may be incompatible with your current board which runs on avr architecture(s).
Library Arduino_MCHPTouch has been declared precompiled:
Precompiled library in "/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/Arduino_MCHPTouch/src/atmega328p" not found
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/Arduino_MCHPTouch/src/touch.c: In function 'touch_configure_ptc_clock':
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/Arduino_MCHPTouch/src/touch.c:209:20: error: 'PTC_GCLK_ID' undeclared (first use in this function)
uint8_t channel = PTC_GCLK_ID;
^~~~~~~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/Arduino_MCHPTouch/src/touch.c:209:20: note: each undeclared identifier is reported only once for each function it appears in
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/Arduino_MCHPTouch/src/touch.c:212:44: error: 'GCLK_CLKCTRL_ID_Pos' undeclared (first use in this function)
uint32_t new_clkctrl_config = (channel << GCLK_CLKCTRL_ID_Pos);
^~~~~~~~~~~~~~~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/Arduino_MCHPTouch/src/touch.c:213:44: error: 'GCLK_CLKCTRL_GEN_Pos' undeclared (first use in this function); did you mean 'GCLK_CLKCTRL_ID_Pos'?
new_clkctrl_config |= source_generator << GCLK_CLKCTRL_GEN_Pos;
^~~~~~~~~~~~~~~~~~~~
GCLK_CLKCTRL_ID_Pos
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/Arduino_MCHPTouch/src/touch.c:219:15: error: 'GCLK' undeclared (first use in this function); did you mean 'SCL'?
*((uint8_t*)&GCLK->CLKCTRL.reg) = channel;
^~~~
SCL
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/Arduino_MCHPTouch/src/touch.c:226:24: error: 'GCLK_CLKCTRL_CLKEN' undeclared (first use in this function); did you mean 'GCLK_CLKCTRL_ID_Pos'?
GCLK->CLKCTRL.reg &= ~GCLK_CLKCTRL_CLKEN;
^~~~~~~~~~~~~~~~~~
GCLK_CLKCTRL_ID_Pos
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/Arduino_MCHPTouch/src/touch.c:245:2: error: 'PM' undeclared (first use in this function); did you mean 'PI'?
PM->APBCMASK.reg |= PM_APBCMASK_PTC;
^~
PI
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/Arduino_MCHPTouch/src/touch.c:245:22: error: 'PM_APBCMASK_PTC' undeclared (first use in this function)
PM->APBCMASK.reg |= PM_APBCMASK_PTC;
^~~~~~~~~~~~~~~
Result: FAIL
Result: FAIL
WARNING: library Arduino_MKRIoTCarrier claims to run on samd architecture(s) and may be incompatible with your current board which runs on avr architecture(s).
WARNING: library Arduino_BQ24195 claims to run on samd architecture(s) and may be incompatible with your current board which runs on avr architecture(s).
WARNING: library Arduino_MCHPTouch claims to run on samd architecture(s) and may be incompatible with your current board which runs on avr architecture(s).
Library Arduino_MCHPTouch has been declared precompiled:
Precompiled library in "/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/Arduino_MCHPTouch/src/atmega328p" not found
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/Arduino_MCHPTouch/src/touch.c: In function 'touch_configure_ptc_clock':
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/Arduino_MCHPTouch/src/touch.c:209:20: error: 'PTC_GCLK_ID' undeclared (first use in this function)
uint8_t channel = PTC_GCLK_ID;
^~~~~~~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/Arduino_MCHPTouch/src/touch.c:209:20: note: each undeclared identifier is reported only once for each function it appears in
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/Arduino_MCHPTouch/src/touch.c:212:44: error: 'GCLK_CLKCTRL_ID_Pos' undeclared (first use in this function)
uint32_t new_clkctrl_config = (channel << GCLK_CLKCTRL_ID_Pos);
^~~~~~~~~~~~~~~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/Arduino_MCHPTouch/src/touch.c:213:44: error: 'GCLK_CLKCTRL_GEN_Pos' undeclared (first use in this function); did you mean 'GCLK_CLKCTRL_ID_Pos'?
new_clkctrl_config |= source_generator << GCLK_CLKCTRL_GEN_Pos;
^~~~~~~~~~~~~~~~~~~~
GCLK_CLKCTRL_ID_Pos
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/Arduino_MCHPTouch/src/touch.c:219:15: error: 'GCLK' undeclared (first use in this function); did you mean 'SCL'?
*((uint8_t*)&GCLK->CLKCTRL.reg) = channel;
^~~~
SCL
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/Arduino_MCHPTouch/src/touch.c:226:24: error: 'GCLK_CLKCTRL_CLKEN' undeclared (first use in this function); did you mean 'GCLK_CLKCTRL_ID_Pos'?
GCLK->CLKCTRL.reg &= ~GCLK_CLKCTRL_CLKEN;
^~~~~~~~~~~~~~~~~~
GCLK_CLKCTRL_ID_Pos
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/Arduino_MCHPTouch/src/touch.c:245:2: error: 'PM' undeclared (first use in this function); did you mean 'PI'?
PM->APBCMASK.reg |= PM_APBCMASK_PTC;
^~
PI
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/Arduino_MCHPTouch/src/touch.c:245:22: error: 'PM_APBCMASK_PTC' undeclared (first use in this function)
PM->APBCMASK.reg |= PM_APBCMASK_PTC;
^~~~~~~~~~~~~~~
Result: FAIL
Result: FAIL
WARNING: library Arduino_MKRIoTCarrier claims to run on samd architecture(s) and may be incompatible with your current board which runs on avr architecture(s).
WARNING: library Arduino_BQ24195 claims to run on samd architecture(s) and may be incompatible with your current board which runs on avr architecture(s).
WARNING: library Arduino_MCHPTouch claims to run on samd architecture(s) and may be incompatible with your current board which runs on avr architecture(s).
Library Arduino_MCHPTouch has been declared precompiled:
Precompiled library in "/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/Arduino_MCHPTouch/src/atmega328p" not found
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/Arduino_MCHPTouch/src/touch.c: In function 'touch_configure_ptc_clock':
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/Arduino_MCHPTouch/src/touch.c:209:20: error: 'PTC_GCLK_ID' undeclared (first use in this function)
uint8_t channel = PTC_GCLK_ID;
^~~~~~~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/Arduino_MCHPTouch/src/touch.c:209:20: note: each undeclared identifier is reported only once for each function it appears in
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/Arduino_MCHPTouch/src/touch.c:212:44: error: 'GCLK_CLKCTRL_ID_Pos' undeclared (first use in this function)
uint32_t new_clkctrl_config = (channel << GCLK_CLKCTRL_ID_Pos);
^~~~~~~~~~~~~~~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/Arduino_MCHPTouch/src/touch.c:213:44: error: 'GCLK_CLKCTRL_GEN_Pos' undeclared (first use in this function); did you mean 'GCLK_CLKCTRL_ID_Pos'?
new_clkctrl_config |= source_generator << GCLK_CLKCTRL_GEN_Pos;
^~~~~~~~~~~~~~~~~~~~
GCLK_CLKCTRL_ID_Pos
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/Arduino_MCHPTouch/src/touch.c:219:15: error: 'GCLK' undeclared (first use in this function); did you mean 'SCL'?
*((uint8_t*)&GCLK->CLKCTRL.reg) = channel;
^~~~
SCL
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/Arduino_MCHPTouch/src/touch.c:226:24: error: 'GCLK_CLKCTRL_CLKEN' undeclared (first use in this function); did you mean 'GCLK_CLKCTRL_ID_Pos'?
GCLK->CLKCTRL.reg &= ~GCLK_CLKCTRL_CLKEN;
^~~~~~~~~~~~~~~~~~
GCLK_CLKCTRL_ID_Pos
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/Arduino_MCHPTouch/src/touch.c:245:2: error: 'PM' undeclared (first use in this function); did you mean 'PI'?
PM->APBCMASK.reg |= PM_APBCMASK_PTC;
^~
PI
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/Arduino_MCHPTouch/src/touch.c:245:22: error: 'PM_APBCMASK_PTC' undeclared (first use in this function)
PM->APBCMASK.reg |= PM_APBCMASK_PTC;
^~~~~~~~~~~~~~~
Result: FAIL
Result: FAIL
WARNING: library Arduino_MKRIoTCarrier claims to run on samd architecture(s) and may be incompatible with your current board which runs on avr architecture(s).
WARNING: library Arduino_BQ24195 claims to run on samd architecture(s) and may be incompatible with your current board which runs on avr architecture(s).
WARNING: library Arduino_MCHPTouch claims to run on samd architecture(s) and may be incompatible with your current board which runs on avr architecture(s).
Library Arduino_MCHPTouch has been declared precompiled:
Precompiled library in "/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/Arduino_MCHPTouch/src/atmega328p" not found
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/Arduino_MCHPTouch/src/touch.c: In function 'touch_configure_ptc_clock':
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/Arduino_MCHPTouch/src/touch.c:209:20: error: 'PTC_GCLK_ID' undeclared (first use in this function)
uint8_t channel = PTC_GCLK_ID;
^~~~~~~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/Arduino_MCHPTouch/src/touch.c:209:20: note: each undeclared identifier is reported only once for each function it appears in
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/Arduino_MCHPTouch/src/touch.c:212:44: error: 'GCLK_CLKCTRL_ID_Pos' undeclared (first use in this function)
uint32_t new_clkctrl_config = (channel << GCLK_CLKCTRL_ID_Pos);
^~~~~~~~~~~~~~~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/Arduino_MCHPTouch/src/touch.c:213:44: error: 'GCLK_CLKCTRL_GEN_Pos' undeclared (first use in this function); did you mean 'GCLK_CLKCTRL_ID_Pos'?
new_clkctrl_config |= source_generator << GCLK_CLKCTRL_GEN_Pos;
^~~~~~~~~~~~~~~~~~~~
GCLK_CLKCTRL_ID_Pos
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/Arduino_MCHPTouch/src/touch.c:219:15: error: 'GCLK' undeclared (first use in this function); did you mean 'SCL'?
*((uint8_t*)&GCLK->CLKCTRL.reg) = channel;
^~~~
SCL
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/Arduino_MCHPTouch/src/touch.c:226:24: error: 'GCLK_CLKCTRL_CLKEN' undeclared (first use in this function); did you mean 'GCLK_CLKCTRL_ID_Pos'?
GCLK->CLKCTRL.reg &= ~GCLK_CLKCTRL_CLKEN;
^~~~~~~~~~~~~~~~~~
GCLK_CLKCTRL_ID_Pos
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/Arduino_MCHPTouch/src/touch.c:245:2: error: 'PM' undeclared (first use in this function); did you mean 'PI'?
PM->APBCMASK.reg |= PM_APBCMASK_PTC;
^~
PI
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/Arduino_MCHPTouch/src/touch.c:245:22: error: 'PM_APBCMASK_PTC' undeclared (first use in this function)
PM->APBCMASK.reg |= PM_APBCMASK_PTC;
^~~~~~~~~~~~~~~
Result: FAIL
Result: FAIL
Result: FAIL
WARNING: library Arduino_MKRIoTCarrier claims to run on samd architecture(s) and may be incompatible with your current board which runs on mbed_nano architecture(s). WARNING: library Arduino_BQ24195 claims to run on samd architecture(s) and may be incompatible with your current board which runs on mbed_nano architecture(s). WARNING: library Arduino_MCHPTouch claims to run on samd architecture(s) and may be incompatible with your current board which runs on mbed_nano architecture(s). Library Arduino_MCHPTouch has been declared precompiled: Using precompiled library in /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Arduino_MCHPTouch/src/cortex-m0plus
Result: FAIL
Result: FAIL
WARNING: library Arduino_MKRIoTCarrier claims to run on samd architecture(s) and may be incompatible with your current board which runs on mbed_nano architecture(s). WARNING: library Arduino_BQ24195 claims to run on samd architecture(s) and may be incompatible with your current board which runs on mbed_nano architecture(s). WARNING: library Arduino_MCHPTouch claims to run on samd architecture(s) and may be incompatible with your current board which runs on mbed_nano architecture(s). Library Arduino_MCHPTouch has been declared precompiled: Using precompiled library in /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Arduino_MCHPTouch/src/cortex-m0plus
Result: FAIL
Result: FAIL
WARNING: library Arduino_MKRIoTCarrier claims to run on samd architecture(s) and may be incompatible with your current board which runs on mbed_nano architecture(s).
WARNING: library Arduino_BQ24195 claims to run on samd architecture(s) and may be incompatible with your current board which runs on mbed_nano architecture(s).
WARNING: library Arduino_MCHPTouch claims to run on samd architecture(s) and may be incompatible with your current board which runs on mbed_nano architecture(s).
In function 'void __static_initialization_and_destruction_0(int, int)',
inlined from '(static initializers for /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Arduino_MKRIoTCarrier/examples/Grove_Inputs/Grove_Inputs.ino)' at /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Arduino_MKRIoTCarrier/examples/Grove_Inputs/Grove_Inputs.ino:34:1:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Arduino_MKRIoTCarrier/examples/Grove_Inputs/Grove_Inputs.ino:5:16: error: call to 'NinaPin::operator int' declared with attribute error: Change me to a #define
int moisture = A5;
^~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Arduino_MKRIoTCarrier/examples/Grove_Inputs/Grove_Inputs.ino:7:11: error: call to 'NinaPin::operator int' declared with attribute error: Change me to a #define
int pir = A6;
^~
Result: FAIL
Result: FAIL
WARNING: library Arduino_MKRIoTCarrier claims to run on samd architecture(s) and may be incompatible with your current board which runs on mbed_nano architecture(s). WARNING: library Arduino_BQ24195 claims to run on samd architecture(s) and may be incompatible with your current board which runs on mbed_nano architecture(s). WARNING: library Arduino_MCHPTouch claims to run on samd architecture(s) and may be incompatible with your current board which runs on mbed_nano architecture(s). Library Arduino_MCHPTouch has been declared precompiled: Using precompiled library in /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Arduino_MCHPTouch/src/cortex-m0plus
Result: FAIL
Result: FAIL
Result: FAIL
WARNING: library Arduino_MKRIoTCarrier claims to run on samd architecture(s) and may be incompatible with your current board which runs on megaavr architecture(s).
WARNING: library Arduino_BQ24195 claims to run on samd architecture(s) and may be incompatible with your current board which runs on megaavr architecture(s).
WARNING: library Arduino_MCHPTouch claims to run on samd architecture(s) and may be incompatible with your current board which runs on megaavr architecture(s).
Library Arduino_MCHPTouch has been declared precompiled:
Precompiled library in "/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Arduino_MCHPTouch/src/atmega4809" not found
The platform does not support 'compiler.libraries.ldflags' for precompiled libraries.
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Arduino_BQ24195/src/BQ24195.h:20:0,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Arduino_BQ24195/src/BQ24195.cpp:20:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h: In member function 'int PMICClass::readRegister(byte)':
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:64:12: note: candidate 1: size_t TwoWire::requestFrom(int, int, int)
size_t requestFrom(int, int, int);
^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:62:12: note: candidate 2: virtual size_t TwoWire::requestFrom(uint8_t, size_t, bool)
size_t requestFrom(uint8_t, size_t, bool);
^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Arduino_MCHPTouch/src/Arduino_MCHPTouch.cpp: In member function 'bool Qt/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Arduino_MCHPTouch/src/touch.c:209:20: error: 'PTC_GCLK_ID' undeclared (first use in this function); did you mean 'RTC_CLKSEL'?
uint8_t channel = PTC_GCLK_ID;
^~~~~~~~~~~
RTC_CLKSEL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Arduino_MCHPTouch/src/touch.c:209:20: note: each undeclared identifier is reported only once for each function it appears in
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Arduino_MCHPTouch/src/touch.c:212:44: error: 'GCLK_CLKCTRL_ID_Pos' undeclared (first use in this function)
uint32_t new_clkctrl_config = (channel << GCLK_CLKCTRL_ID_Pos);
^~~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Arduino_MCHPTouch/src/touch.c:213:44: error: 'GCLK_CLKCTRL_GEN_Pos' undeclared (first use in this function); did you mean 'GCLK_CLKCTRL_ID_Pos'?
new_clkctrl_config |= source_generator << GCLK_CLKCTRL_GEN_Pos;
^~~~~~~~~~~~~~~~~~~~
GCLK_CLKCTRL_ID_Pos
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Arduino_MCHPTouch/src/touch.c:219:15: error: 'GCLK' undeclared (first use in this function); did you mean 'SCL'?
*((uint8_t*)&GCLK->CLKCTRL.reg) = channel;
^~~~
SCL
In file included from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/tools/avr-gcc/7.3.0-atmel3.6.1-arduino5/avr/include/avr/io.h:677:0,
from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/tools/avr-gcc/7.3.0-atmel3.6.1-arduino5/avr/include/avr/pgmspace.h:90,
from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/cores/arduino/Arduino.h:25,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Arduino_MCHPTouch/src/touch.c:47:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Arduino_MCHPTouch/src/touch.c:219:21: error: expected identifier before '(' token
*((uint8_t*)&GCLK->CLKCTRL.reg) = channel;
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Arduino_MCHPTouch/src/touch.c:222:31: error: expected identifier before '(' token
uint32_t prev_gen_id = GCLK->CLKCTRL.bit.GEN;
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Arduino_MCHPTouch/src/touch.c:223:8: error: expected identifier before '(' token
GCLK->CLKCTRL.bit.GEN = 0;
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Arduino_MCHPTouch/src/touch.c:226:8: error: expected identifier before '(' token
GCLK->CLKCTRL.reg &= ~GCLK_CLKCTRL_CLKEN;
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Arduino_MCHPTouch/src/touch.c:229:15: error: expected identifier before '(' token
while (GCLK->CLKCTRL.reg & GCLK_CLKCTRL_CLKEN);
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Arduino_MCHPTouch/src/touch.c:232:8: error: expected identifier before '(' token
GCLK->CLKCTRL.bit.GEN = prev_gen_id;
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Arduino_MCHPTouch/src/touch.c:238:8: error: expected identifier before '(' token
GCLK->CLKCTRL.reg = new_clkctrl_config;
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Arduino_MCHPTouch/src/touch.c:240:21: error: expected identifier before '(' token
*((uint8_t*)&GCLK->CLKCTRL.reg) = channel;
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Arduino_MCHPTouch/src/touch.c:243:8: error: expected identifier before '(' token
GCLK->CLKCTRL.reg |= GCLK_CLKCTRL_CLKEN;
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Arduino_MCHPTouch/src/touch.c:245:2: error: 'PM' undeclared (first use in this function); did you mean 'PE'?
PM->APBCMASK.reg |= PM_APBCMASK_PTC;
^~
PE
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Arduino_MCHPTouch/src/touch.c:245:22: error: 'PM_APBCMASK_PTC' undeclared (first use in this function)
PM->APBCMASK.reg |= PM_APBCMASK_PTC;
^~~~~~~~~~~~~~~
Result: FAIL
Result: FAIL
WARNING: library Arduino_MKRIoTCarrier claims to run on samd architecture(s) and may be incompatible with your current board which runs on megaavr architecture(s).
WARNING: library Arduino_BQ24195 claims to run on samd architecture(s) and may be incompatible with your current board which runs on megaavr architecture(s).
WARNING: library Arduino_MCHPTouch claims to run on samd architecture(s) and may be incompatible with your current board which runs on megaavr architecture(s).
Library Arduino_MCHPTouch has been declared precompiled:
Precompiled library in "/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Arduino_MCHPTouch/src/atmega4809" not found
The platform does not support 'compiler.libraries.ldflags' for precompiled libraries.
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Arduino_BQ24195/src/BQ24195.h:20:0,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Arduino_BQ24195/src/BQ24195.cpp:20:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h: In member function 'int PMICClass::readRegister(byte)':
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:64:12: note: candidate 1: size_t TwoWire::requestFrom(int, int, int)
size_t requestFrom(int, int, int);
^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:62:12: note: candidate 2: virtual size_t TwoWire::requestFrom(uint8_t, size_t, bool)
size_t requestFrom(uint8_t, size_t, bool);
^~~~~~~~~~~
Result: FAIL
Result: FAIL
WARNING: library Arduino_MKRIoTCarrier claims to run on samd architecture(s) and may be incompatible with your current board which runs on megaavr architecture(s).
WARNING: library Arduino_BQ24195 claims to run on samd architecture(s) and may be incompatible with your current board which runs on megaavr architecture(s).
WARNING: library Arduino_MCHPTouch claims to run on samd architecture(s) and may be incompatible with your current board which runs on megaavr architecture(s).
Library Arduino_MCHPTouch has been declared precompiled:
Precompiled library in "/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Arduino_MCHPTouch/src/atmega4809" not found
The platform does not support 'compiler.libraries.ldflags' for precompiled libraries.
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Arduino_BQ24195/src/BQ24195.h:20:0,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Arduino_BQ24195/src/BQ24195.cpp:20:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h: In member function 'int PMICClass::readRegister(byte)':
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:64:12: note: candidate 1: size_t TwoWire::requestFrom(int, int, int)
size_t requestFrom(int, int, int);
^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:62:12: note: candidate 2: virtual size_t TwoWire::requestFrom(uint8_t, size_t, bool)
size_t requestFrom(uint8_t, size_t, bool);
^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Arduino_MCHPTouch/src/touch.c: In function 'touch_configure_ptc_clock':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Arduino_MCHPTouch/src/touch.c:209:20: error: 'PTC_GCLK_ID' undeclared (first use in this function); did you mean 'RTC_CLKSEL'?
uint8_t channel = PTC_GCLK_ID;
^~~~/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Arduino_MCHPTouch/src/Arduino_MCHPTouch.cpp:34:3: note: suggested alternative: 'analogRead'
analogReadResolution(10);
^~~~~~~~~~~~~~~~~~~~
analogRead
Result: FAIL
Result: FAIL
WARNING: library Arduino_MKRIoTCarrier claims to run on samd architecture(s) and may be incompatible with your current board which runs on megaavr architecture(s).
WARNING: library Arduino_BQ24195 claims to run on samd architecture(s) and may be incompatible with your current board which runs on megaavr architecture(s).
WARNING: library Arduino_MCHPTouch claims to run on samd architecture(s) and may be incompatible with your current board which runs on megaavr architecture(s).
Library Arduino_MCHPTouch has been declared precompiled:
Precompiled library in "/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Arduino_MCHPTouch/src/atmega4809" not found
The platform does not support 'compiler.libraries.ldflags' for precompiled libraries.
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Arduino_BQ24195/src/BQ24195.h:20:0,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Arduino_BQ24195/src/BQ24195.cpp:20:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h: In member function 'int PMICClass::readRegister(byte)':
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:64:12: note: candidate 1: size_t TwoWire::requestFrom(int, int, int)
size_t requestFrom(int, int, int);
^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:62:12: note: candidate 2: virtual size_t TwoWire::requestFrom(uint8_t, size_t, bool)
size_t requestFrom(uint8_t, size_t, bool);
^~~~~~~~~~~
Result: FAIL
Result: FAIL
Result: PASS
Library Arduino_MCHPTouch has been declared precompiled: Using precompiled library in /Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/Arduino_MCHPTouch/src/cortex-m0plus Sketch uses 27004 bytes (10%) of program storage space. Maximum is 262144 bytes. Global variables use 4604 bytes (14%) of dynamic memory, leaving 28164 bytes for local variables. Maximum is 32768 bytes.
Result: FAIL
Result: PASS
Library Arduino_MCHPTouch has been declared precompiled: Using precompiled library in /Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/Arduino_MCHPTouch/src/cortex-m0plus Sketch uses 51672 bytes (19%) of program storage space. Maximum is 262144 bytes. Global variables use 5516 bytes (16%) of dynamic memory, leaving 27252 bytes for local variables. Maximum is 32768 bytes.
Result: FAIL
Result: PASS
Library Arduino_MCHPTouch has been declared precompiled: Using precompiled library in /Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/Arduino_MCHPTouch/src/cortex-m0plus Sketch uses 47700 bytes (18%) of program storage space. Maximum is 262144 bytes. Global variables use 5468 bytes (16%) of dynamic memory, leaving 27300 bytes for local variables. Maximum is 32768 bytes.
Result: FAIL
Result: PASS
Library Arduino_MCHPTouch has been declared precompiled: Using precompiled library in /Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/Arduino_MCHPTouch/src/cortex-m0plus Sketch uses 49804 bytes (18%) of program storage space. Maximum is 262144 bytes. Global variables use 5500 bytes (16%) of dynamic memory, leaving 27268 bytes for local variables. Maximum is 32768 bytes.
Result: FAIL
Result: FAIL
Result: FAIL
WARNING: library Arduino_MKRIoTCarrier claims to run on samd architecture(s) and may be incompatible with your current board which runs on esp32 architecture(s).
WARNING: library Arduino_BQ24195 claims to run on samd architecture(s) and may be incompatible with your current board which runs on esp32 architecture(s).
WARNING: library Arduino_MCHPTouch claims to run on samd architecture(s) and may be incompatible with your current board which runs on esp32 architecture(s).
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SD/src/utility/Sd2Card.h:26:0,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SD/src/utility/SdFat.h:29,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SD/src/SD.h:20,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Arduino_MKRIoTCarrier/src/Arduino_MKRIoTCarrier.h:38,
from /tmp/arduino-testlib355449537/test/test.ino:1:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SD/src/utility/Sd2PinMap.h:524:2: error: #error Architecture or board not supported.
#error Architecture or board not supported.
^
Multiple libraries were found for "SD.h"
Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SD
Not used: /home/ec2-user/arduino-testlib/cli-datadir/data/packages/esp32/hardware/esp32/1.0.6/libraries/SD
Result: FAIL
Result: FAIL
WARNING: library Arduino_MKRIoTCarrier claims to run on samd architecture(s) and may be incompatible with your current board which runs on esp32 architecture(s).
WARNING: library Arduino_BQ24195 claims to run on samd architecture(s) and may be incompatible with your current board which runs on esp32 architecture(s).
WARNING: library Arduino_MCHPTouch claims to run on samd architecture(s) and may be incompatible with your current board which runs on esp32 architecture(s).
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SD/src/utility/Sd2Card.h:26:0,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SD/src/utility/SdFat.h:29,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SD/src/SD.h:20,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Arduino_MKRIoTCarrier/src/Arduino_MKRIoTCarrier.h:38,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Arduino_MKRIoTCarrier/examples/All_Features/All_Features.ino:6:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SD/src/utility/Sd2PinMap.h:524:2: error: #error Architecture or board not supported.
#error Architecture or board not supported.
^
Multiple libraries were found for "SD.h"
Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SD
Not used: /home/ec2-user/arduino-testlib/cli-datadir/data/packages/esp32/hardware/esp32/1.0.6/libraries/SD
Result: FAIL
Result: FAIL
WARNING: library Arduino_MKRIoTCarrier claims to run on samd architecture(s) and may be incompatible with your current board which runs on esp32 architecture(s).
WARNING: library Arduino_BQ24195 claims to run on samd architecture(s) and may be incompatible with your current board which runs on esp32 architecture(s).
WARNING: library Arduino_MCHPTouch claims to run on samd architecture(s) and may be incompatible with your current board which runs on esp32 architecture(s).
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SD/src/utility/Sd2Card.h:26:0,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SD/src/utility/SdFat.h:29,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SD/src/SD.h:20,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Arduino_MKRIoTCarrier/src/Arduino_MKRIoTCarrier.h:38,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Arduino_MKRIoTCarrier/examples/Grove_Inputs/Grove_Inputs.ino:1:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SD/src/utility/Sd2PinMap.h:524:2: error: #error Architecture or board not supported.
#error Architecture or board not supported.
^
Multiple libraries were found for "SD.h"
Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SD
Not used: /home/ec2-user/arduino-testlib/cli-datadir/data/packages/esp32/hardware/esp32/1.0.6/libraries/SD
Result: FAIL
Result: FAIL
WARNING: library Arduino_MKRIoTCarrier claims to run on samd architecture(s) and may be incompatible with your current board which runs on esp32 architecture(s).
WARNING: library Arduino_BQ24195 claims to run on samd architecture(s) and may be incompatible with your current board which runs on esp32 architecture(s).
WARNING: library Arduino_MCHPTouch claims to run on samd architecture(s) and may be incompatible with your current board which runs on esp32 architecture(s).
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SD/src/utility/Sd2Card.h:26:0,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SD/src/utility/SdFat.h:29,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SD/src/SD.h:20,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Arduino_MKRIoTCarrier/src/Arduino_MKRIoTCarrier.h:38,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Arduino_MKRIoTCarrier/examples/SD_card/SD_card.ino:1:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SD/src/utility/Sd2PinMap.h:524:2: error: #error Architecture or board not supported.
#error Architecture or board not supported.
^
Multiple libraries were found for "SD.h"
Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SD
Not used: /home/ec2-user/arduino-testlib/cli-datadir/data/packages/esp32/hardware/esp32/1.0.6/libraries/SD
Result: FAIL
Result: FAIL