Arduino_NineAxesMotion - compatibility matrix

This report was generated on Wednesday, 23-Feb-22 22:48:15 CET using arduino-testlib.

Arduino_NineAxesMotion

Version: 1.1.1
More details

Compatibility matrix

Board Claims compatibility Inclusion 
Accelerometer
 
BareMinimum
 
Euler
 
Motion
arduino:avr:uno
1.8.4 		Yes PASS PASS PASS PASS PASS
arduino:mbed_nano:nanorp2040connect
2.7.2 		Yes ⚠️ FAIL FAIL FAIL FAIL FAIL
arduino:megaavr:nona4809
1.8.7 		Yes PASS PASS PASS PASS PASS
arduino:samd:mkrwifi1010
1.8.12 		Yes ⚠️ FAIL FAIL FAIL FAIL FAIL
esp32:esp32:d1_mini32
1.0.6 		Yes ⚠️ FAIL FAIL FAIL FAIL FAIL

Compilation logs

arduino:avr:uno @ 1.8.4

Inclusion

Result: PASS 

Sketch uses 1636 bytes (5%) of program storage space. Maximum is 32256 bytes.
Global variables use 122 bytes (5%) of dynamic memory, leaving 1926 bytes for local variables. Maximum is 2048 bytes.

examples/Accelerometer

Result: PASS 

Sketch uses 10040 bytes (31%) of program storage space. Maximum is 32256 bytes.
Global variables use 735 bytes (35%) of dynamic memory, leaving 1313 bytes for local variables. Maximum is 2048 bytes.

examples/BareMinimum

Result: PASS 

Sketch uses 4412 bytes (13%) of program storage space. Maximum is 32256 bytes.
Global variables use 330 bytes (16%) of dynamic memory, leaving 1718 bytes for local variables. Maximum is 2048 bytes.

examples/Euler

Result: PASS 

Sketch uses 8632 bytes (26%) of program storage space. Maximum is 32256 bytes.
Global variables use 579 bytes (28%) of dynamic memory, leaving 1469 bytes for local variables. Maximum is 2048 bytes.

examples/Motion

Result: PASS 

Sketch uses 8208 bytes (25%) of program storage space. Maximum is 32256 bytes.
Global variables use 1000 bytes (48%) of dynamic memory, leaving 1048 bytes for local variables. Maximum is 2048 bytes.

arduino:mbed_nano:nanorp2040connect @ 2.7.2

Inclusion

Result: FAIL 

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Arduino_NineAxesMotion/src/Arduino_NineAxesMotion.cpp:1013:55: error: default argument given for parameter 1 of 'void NineAxesMotion::begin(unsigned int)' [-fpermissive]
 void NineAxesMotion::begin(unsigned int address = 0x28)
                                                       ^
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Arduino_NineAxesMotion/src/Arduino_NineAxesMotion.cpp:64:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Arduino_NineAxesMotion/src/Arduino_NineAxesMotion.h:722:7: note: previous specification in 'void NineAxesMotion::begin(unsigned int)' here
  void begin(unsigned int address = 0x28);
       ^~~~~

examples/Accelerometer

Result: FAIL 

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Arduino_NineAxesMotion/src/Arduino_NineAxesMotion.cpp:1013:55: error: default argument given for parameter 1 of 'void NineAxesMotion::begin(unsigned int)' [-fpermissive]
 void NineAxesMotion::begin(unsigned int address = 0x28)
                                                       ^
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Arduino_NineAxesMotion/src/Arduino_NineAxesMotion.cpp:64:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Arduino_NineAxesMotion/src/Arduino_NineAxesMotion.h:722:7: note: previous specification in 'void NineAxesMotion::begin(unsigned int)' here
  void begin(unsigned int address = 0x28);
       ^~~~~

examples/BareMinimum

Result: FAIL 

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Arduino_NineAxesMotion/src/Arduino_NineAxesMotion.cpp:1013:55: error: default argument given for parameter 1 of 'void NineAxesMotion::begin(unsigned int)' [-fpermissive]
 void NineAxesMotion::begin(unsigned int address = 0x28)
                                                       ^
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Arduino_NineAxesMotion/src/Arduino_NineAxesMotion.cpp:64:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Arduino_NineAxesMotion/src/Arduino_NineAxesMotion.h:722:7: note: previous specification in 'void NineAxesMotion::begin(unsigned int)' here
  void begin(unsigned int address = 0x28);
       ^~~~~

examples/Euler

Result: FAIL 

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Arduino_NineAxesMotion/src/Arduino_NineAxesMotion.cpp:1013:55: error: default argument given for parameter 1 of 'void NineAxesMotion::begin(unsigned int)' [-fpermissive]
 void NineAxesMotion::begin(unsigned int address = 0x28)
                                                       ^
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Arduino_NineAxesMotion/src/Arduino_NineAxesMotion.cpp:64:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Arduino_NineAxesMotion/src/Arduino_NineAxesMotion.h:722:7: note: previous specification in 'void NineAxesMotion::begin(unsigned int)' here
  void begin(unsigned int address = 0x28);
       ^~~~~

examples/Motion

Result: FAIL 

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Arduino_NineAxesMotion/src/Arduino_NineAxesMotion.cpp:1013:55: error: default argument given for parameter 1 of 'void NineAxesMotion::begin(unsigned int)' [-fpermissive]
 void NineAxesMotion::begin(unsigned int address = 0x28)
                                                       ^
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Arduino_NineAxesMotion/src/Arduino_NineAxesMotion.cpp:64:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Arduino_NineAxesMotion/src/Arduino_NineAxesMotion.h:722:7: note: previous specification in 'void NineAxesMotion::begin(unsigned int)' here
  void begin(unsigned int address = 0x28);
       ^~~~~

arduino:megaavr:nona4809 @ 1.8.7

Inclusion

Result: PASS 

Sketch uses 3104 bytes (6%) of program storage space. Maximum is 49152 bytes.
Global variables use 317 bytes (5%) of dynamic memory, leaving 5827 bytes for local variables. Maximum is 6144 bytes.
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Arduino_NineAxesMotion/src/Arduino_NineAxesMotion.h:72:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Arduino_NineAxesMotion/src/Arduino_NineAxesMotion.cpp:64:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h: In function 'signed char BNO055_I2C_bus_read(unsigned char, unsigned char, unsigned char*, unsigned char)':
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:63:12: note: candidate 1: size_t TwoWire::requestFrom(int, int)
     size_t requestFrom(int, int);
            ^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:61:12: note: candidate 2: virtual size_t TwoWire::requestFrom(uint8_t, size_t)
     size_t requestFrom(uint8_t, size_t);
            ^~~~~~~~~~~

examples/Accelerometer

Result: PASS 

Sketch uses 10784 bytes (21%) of program storage space. Maximum is 49152 bytes.
Global variables use 595 bytes (9%) of dynamic memory, leaving 5549 bytes for local variables. Maximum is 6144 bytes.
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Arduino_NineAxesMotion/src/Arduino_NineAxesMotion.h:72:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Arduino_NineAxesMotion/src/Arduino_NineAxesMotion.cpp:64:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h: In function 'signed char BNO055_I2C_bus_read(unsigned char, unsigned char, unsigned char*, unsigned char)':
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:63:12: note: candidate 1: size_t TwoWire::requestFrom(int, int)
     size_t requestFrom(int, int);
            ^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:61:12: note: candidate 2: virtual size_t TwoWire::requestFrom(uint8_t, size_t)
     size_t requestFrom(uint8_t, size_t);
            ^~~~~~~~~~~

examples/BareMinimum

Result: PASS 

Sketch uses 4754 bytes (9%) of program storage space. Maximum is 49152 bytes.
Global variables use 434 bytes (7%) of dynamic memory, leaving 5710 bytes for local variables. Maximum is 6144 bytes.
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Arduino_NineAxesMotion/src/Arduino_NineAxesMotion.h:72:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Arduino_NineAxesMotion/src/Arduino_NineAxesMotion.cpp:64:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h: In function 'signed char BNO055_I2C_bus_read(unsigned char, unsigned char, unsigned char*, unsigned char)':
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:63:12: note: candidate 1: size_t TwoWire::requestFrom(int, int)
     size_t requestFrom(int, int);
            ^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:61:12: note: candidate 2: virtual size_t TwoWire::requestFrom(uint8_t, size_t)
     size_t requestFrom(uint8_t, size_t);
            ^~~~~~~~~~~

examples/Euler

Result: PASS 

Sketch uses 9168 bytes (18%) of program storage space. Maximum is 49152 bytes.
Global variables use 593 bytes (9%) of dynamic memory, leaving 5551 bytes for local variables. Maximum is 6144 bytes.
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Arduino_NineAxesMotion/src/Arduino_NineAxesMotion.h:72:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Arduino_NineAxesMotion/src/Arduino_NineAxesMotion.cpp:64:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h: In function 'signed char BNO055_I2C_bus_read(unsigned char, unsigned char, unsigned char*, unsigned char)':
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:63:12: note: candidate 1: size_t TwoWire::requestFrom(int, int)
     size_t requestFrom(int, int);
            ^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:61:12: note: candidate 2: virtual size_t TwoWire::requestFrom(uint8_t, size_t)
     size_t requestFrom(uint8_t, size_t);
            ^~~~~~~~~~~

examples/Motion

Result: PASS 

Sketch uses 9509 bytes (19%) of program storage space. Maximum is 49152 bytes.
Global variables use 784 bytes (12%) of dynamic memory, leaving 5360 bytes for local variables. Maximum is 6144 bytes.
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Arduino_NineAxesMotion/src/Arduino_NineAxesMotion.h:72:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Arduino_NineAxesMotion/src/Arduino_NineAxesMotion.cpp:64:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h: In function 'signed char BNO055_I2C_bus_read(unsigned char, unsigned char, unsigned char*, unsigned char)':
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:63:12: note: candidate 1: size_t TwoWire::requestFrom(int, int)
     size_t requestFrom(int, int);
            ^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:61:12: note: candidate 2: virtual size_t TwoWire::requestFrom(uint8_t, size_t)
     size_t requestFrom(uint8_t, size_t);
            ^~~~~~~~~~~

arduino:samd:mkrwifi1010 @ 1.8.12

Inclusion

Result: FAIL 

/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/Arduino_NineAxesMotion/src/Arduino_NineAxesMotion.cpp:1013:55: error: default argument given for parameter 1 of 'void NineAxesMotion::begin(unsigned int)' [-fpermissive]
 void NineAxesMotion::begin(unsigned int address = 0x28)
                                                       ^
In file included from /Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/Arduino_NineAxesMotion/src/Arduino_NineAxesMotion.cpp:64:0:
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/Arduino_NineAxesMotion/src/Arduino_NineAxesMotion.h:722:7: note: previous specification in 'void NineAxesMotion::begin(unsigned int)' here
  void begin(unsigned int address = 0x28);
       ^~~~~

examples/Accelerometer

Result: FAIL 

/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/Arduino_NineAxesMotion/src/Arduino_NineAxesMotion.cpp:1013:55: error: default argument given for parameter 1 of 'void NineAxesMotion::begin(unsigned int)' [-fpermissive]
 void NineAxesMotion::begin(unsigned int address = 0x28)
                                                       ^
In file included from /Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/Arduino_NineAxesMotion/src/Arduino_NineAxesMotion.cpp:64:0:
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/Arduino_NineAxesMotion/src/Arduino_NineAxesMotion.h:722:7: note: previous specification in 'void NineAxesMotion::begin(unsigned int)' here
  void begin(unsigned int address = 0x28);
       ^~~~~

examples/BareMinimum

Result: FAIL 

/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/Arduino_NineAxesMotion/src/Arduino_NineAxesMotion.cpp:1013:55: error: default argument given for parameter 1 of 'void NineAxesMotion::begin(unsigned int)' [-fpermissive]
 void NineAxesMotion::begin(unsigned int address = 0x28)
                                                       ^
In file included from /Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/Arduino_NineAxesMotion/src/Arduino_NineAxesMotion.cpp:64:0:
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/Arduino_NineAxesMotion/src/Arduino_NineAxesMotion.h:722:7: note: previous specification in 'void NineAxesMotion::begin(unsigned int)' here
  void begin(unsigned int address = 0x28);
       ^~~~~

examples/Euler

Result: FAIL 

/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/Arduino_NineAxesMotion/src/Arduino_NineAxesMotion.cpp:1013:55: error: default argument given for parameter 1 of 'void NineAxesMotion::begin(unsigned int)' [-fpermissive]
 void NineAxesMotion::begin(unsigned int address = 0x28)
                                                       ^
In file included from /Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/Arduino_NineAxesMotion/src/Arduino_NineAxesMotion.cpp:64:0:
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/Arduino_NineAxesMotion/src/Arduino_NineAxesMotion.h:722:7: note: previous specification in 'void NineAxesMotion::begin(unsigned int)' here
  void begin(unsigned int address = 0x28);
       ^~~~~

examples/Motion

Result: FAIL 

/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/Arduino_NineAxesMotion/src/Arduino_NineAxesMotion.cpp:1013:55: error: default argument given for parameter 1 of 'void NineAxesMotion::begin(unsigned int)' [-fpermissive]
 void NineAxesMotion::begin(unsigned int address = 0x28)
                                                       ^
In file included from /Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/Arduino_NineAxesMotion/src/Arduino_NineAxesMotion.cpp:64:0:
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/Arduino_NineAxesMotion/src/Arduino_NineAxesMotion.h:722:7: note: previous specification in 'void NineAxesMotion::begin(unsigned int)' here
  void begin(unsigned int address = 0x28);
       ^~~~~

esp32:esp32:d1_mini32 @ 1.0.6

Inclusion

Result: FAIL 



					
					
examples/Accelerometer

					

						Result: FAIL
					

					

					
					
examples/BareMinimum

					

						Result: FAIL
					

					

					
					
examples/Euler

					

						Result: FAIL
					

					

					
					
examples/Motion

					

						Result: FAIL