Arduino Smart Watch - compatibility matrix

This report was generated on Wednesday, 23-Feb-22 22:48:15 CET using arduino-testlib.

Arduino Smart Watch

Compatibility matrix

Board	Claims compatibility	Inclusion
arduino:avr:uno 1.8.4	Yes	PASS
arduino:mbed_nano:nanorp2040connect 2.7.2	No	FAIL
arduino:megaavr:nona4809 1.8.7	No	FAIL
arduino:samd:mkrwifi1010 1.8.12	No	FAIL
esp32:esp32:d1_mini32 1.0.6	No ⚠️	PASS

Compilation logs

arduino:avr:uno @ 1.8.4

Inclusion

Result: PASS
This library has no main header file so an empty one was created.

Sketch uses 4476 bytes (13%) of program storage space. Maximum is 32256 bytes.
Global variables use 348 bytes (16%) of dynamic memory, leaving 1700 bytes for local variables. Maximum is 2048 bytes.

arduino:mbed_nano:nanorp2040connect @ 2.7.2

Inclusion

Result: FAIL

WARNING: library Arduino_Smart_Watch claims to run on avr architecture(s) and may be incompatible with your current board which runs on mbed_nano architecture(s).
WARNING: library U8glib claims to run on avr, sam architecture(s) and may be incompatible with your current board which runs on mbed_nano architecture(s).

arduino:megaavr:nona4809 @ 1.8.7

Inclusion

Result: FAIL

WARNING: library Arduino_Smart_Watch claims to run on avr architecture(s) and may be incompatible with your current board which runs on megaavr architecture(s).
WARNING: library U8glib claims to run on avr, sam architecture(s) and may be incompatible with your current board which runs on megaavr architecture(s).
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Arduino_Smart_Watch/src/watch.cpp:40:0:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h: In member function 'void Watch::mpu6050Read()':
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:64:12: note: candidate 1: size_t TwoWire::requestFrom(int, int, int)
     size_t requestFrom(int, int, int);
            ^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:62:12: note: candidate 2: virtual size_t TwoWire::requestFrom(uint8_t, size_t, bool)
     size_t requestFrom(uint8_t, size_t, bool);
            ^~~~~~~~~~~

arduino:samd:mkrwifi1010 @ 1.8.12

Inclusion

Result: FAIL
This library has no main header file so an empty one was created.

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/U8glib/src/clib/u8g_delay.c:57:14: fatal error: delay.h: No such file or directory
 #    include <delay.h>
              ^~~~~~~~~
compilation terminated.

esp32:esp32:d1_mini32 @ 1.0.6

Inclusion

Result: PASS

WARNING: library Arduino_Smart_Watch claims to run on avr architecture(s) and may be incompatible with your current board which runs on esp32 architecture(s).
WARNING: library U8glib claims to run on avr, sam architecture(s) and may be incompatible with your current board which runs on esp32 architecture(s).
Sketch uses 206246 bytes (15%) of program storage space. Maximum is 1310720 bytes.
Global variables use 14128 bytes (4%) of dynamic memory, leaving 313552 bytes for local variables. Maximum is 327680 bytes.
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Arduino_Smart_Watch/src/watch.cpp:40:0:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/esp32/hardware/esp32/1.0.6/libraries/Wire/src/Wire.h: In member function 'void Watch::mpu6050Read()':
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/esp32/hardware/esp32/1.0.6/libraries/Wire/src/Wire.h:102:13: note: candidate 1: uint8_t TwoWire::requestFrom(int, int, int)
     uint8_t requestFrom(int address, int size, int sendStop);
             ^
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/esp32/hardware/esp32/1.0.6/libraries/Wire/src/Wire.h:97:13: note: candidate 2: uint8_t TwoWire::requestFrom(uint16_t, uint8_t, bool)
     uint8_t requestFrom(uint16_t address, uint8_t size, bool sendStop);
             ^
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/esp32/hardware/esp32/1.0.6/libraries/Wire/src/Wire.h:102:13: note: candidate 1: uint8_t TwoWire::requestFrom(int, int, int)
     uint8_t requestFrom(int address, int size, int sendStop);
             ^
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/esp32/hardware/esp32/1.0.6/libraries/Wire/src/Wire.h:97:13: note: candidate 2: uint8_t TwoWire::requestFrom(uint16_t, uint8_t, bool)
     uint8_t requestFrom(uint16_t address, uint8_t size, bool sendStop);
             ^