AskSinPP - compatibility matrix

This report was generated on Wednesday, 23-Feb-22 22:48:15 CET using arduino-testlib.

AskSinPP

Version: 5.0.0
More details

Compatibility matrix

Board	Claims compatibility	Inclusion	HM-RC-4	HM-RC-8	HM-RC-P1	HM-SEC-SD	HM-SEC-WDS	HM-LC-Bl1-FM	HM-LC-Dim1PWM-CV	HM-LC-Dim1TPBU-FM	HM-SEC-RHS	HM-SEN-MDIR-WM55	HM-WDS10-TH-O	HM-WDS40-TH-I	HM-ES-TX-WM	max	stm32	custom	FreqTest	HM-DW-WM	HM-LC-DW-WM	HM-LC-SW1-BA-PCB	HM-LC-SWX-SM	HM-SEC-MDIR	HM-WDS100-C6-O-2	tests
arduino:avr:uno 1.8.4	Yes	PASS	PASS	PASS	PASS	PASS	PASS	PASS	PASS	PASS	PASS	FAIL	FAIL	PASS	PASS	FAIL	FAIL	FAIL	PASS	PASS	PASS	PASS	PASS	PASS	PASS	FAIL
arduino:mbed_nano:nanorp2040connect 2.7.2	No	FAIL	FAIL	FAIL	FAIL	FAIL	FAIL	FAIL	FAIL	FAIL	FAIL	FAIL	FAIL	FAIL	FAIL	FAIL	FAIL	FAIL	FAIL	FAIL	FAIL	FAIL	FAIL	FAIL	FAIL	FAIL
arduino:megaavr:nona4809 1.8.7	No	FAIL	FAIL	FAIL	FAIL	FAIL	FAIL	FAIL	FAIL	FAIL	FAIL	FAIL	FAIL	FAIL	FAIL	FAIL	FAIL	FAIL	FAIL	FAIL	FAIL	FAIL	FAIL	FAIL	FAIL	FAIL
arduino:samd:mkrwifi1010 1.8.12	No	FAIL	FAIL	FAIL	FAIL	FAIL	FAIL	FAIL	FAIL	FAIL	FAIL	FAIL	FAIL	FAIL	FAIL	FAIL	FAIL	FAIL	FAIL	FAIL	FAIL	FAIL	FAIL	FAIL	FAIL	FAIL
esp32:esp32:d1_mini32 1.0.6	No	FAIL	FAIL	FAIL	FAIL	FAIL	FAIL	FAIL	FAIL	FAIL	FAIL	FAIL	FAIL	FAIL	FAIL	FAIL	FAIL	FAIL	FAIL	FAIL	FAIL	FAIL	FAIL	FAIL	FAIL	FAIL

Compilation logs

arduino:avr:uno @ 1.8.4

Inclusion

Result: PASS

Sketch uses 1670 bytes (5%) of program storage space. Maximum is 32256 bytes.
Global variables use 36 bytes (1%) of dynamic memory, leaving 2012 bytes for local variables. Maximum is 2048 bytes.

examples/FreqTest

Result: PASS

Sketch uses 11406 bytes (35%) of program storage space. Maximum is 32256 bytes.
Global variables use 666 bytes (32%) of dynamic memory, leaving 1382 bytes for local variables. Maximum is 2048 bytes.

examples/HM-DW-WM

Result: PASS

Sketch uses 23546 bytes (72%) of program storage space. Maximum is 32256 bytes.
Global variables use 1030 bytes (50%) of dynamic memory, leaving 1018 bytes for local variables. Maximum is 2048 bytes.

examples/HM-ES-TX-WM

Result: PASS

Sketch uses 20224 bytes (62%) of program storage space. Maximum is 32256 bytes.
Global variables use 794 bytes (38%) of dynamic memory, leaving 1254 bytes for local variables. Maximum is 2048 bytes.

examples/HM-LC-Bl1-FM

Result: PASS

Sketch uses 22074 bytes (68%) of program storage space. Maximum is 32256 bytes.
Global variables use 707 bytes (34%) of dynamic memory, leaving 1341 bytes for local variables. Maximum is 2048 bytes.

examples/HM-LC-DW-WM

Result: PASS

Sketch uses 23684 bytes (73%) of program storage space. Maximum is 32256 bytes.
Global variables use 1030 bytes (50%) of dynamic memory, leaving 1018 bytes for local variables. Maximum is 2048 bytes.

examples/HM-LC-Dim1PWM-CV

Result: PASS

Sketch uses 23408 bytes (72%) of program storage space. Maximum is 32256 bytes.
Global variables use 835 bytes (40%) of dynamic memory, leaving 1213 bytes for local variables. Maximum is 2048 bytes.

examples/HM-LC-Dim1TPBU-FM

Result: PASS

Sketch uses 27298 bytes (84%) of program storage space. Maximum is 32256 bytes.
Global variables use 1182 bytes (57%) of dynamic memory, leaving 866 bytes for local variables. Maximum is 2048 bytes.

examples/HM-LC-SW1-BA-PCB

Result: PASS

Sketch uses 21076 bytes (65%) of program storage space. Maximum is 32256 bytes.
Global variables use 667 bytes (32%) of dynamic memory, leaving 1381 bytes for local variables. Maximum is 2048 bytes.

examples/HM-LC-SWX-SM

Result: PASS

Sketch uses 20092 bytes (62%) of program storage space. Maximum is 32256 bytes.
Global variables use 704 bytes (34%) of dynamic memory, leaving 1344 bytes for local variables. Maximum is 2048 bytes.

examples/HM-RC-4

Result: PASS

Sketch uses 18986 bytes (58%) of program storage space. Maximum is 32256 bytes.
Global variables use 730 bytes (35%) of dynamic memory, leaving 1318 bytes for local variables. Maximum is 2048 bytes.

examples/HM-RC-8

Result: PASS

Sketch uses 19096 bytes (59%) of program storage space. Maximum is 32256 bytes.
Global variables use 857 bytes (41%) of dynamic memory, leaving 1191 bytes for local variables. Maximum is 2048 bytes.

examples/HM-RC-P1

Result: PASS

Sketch uses 18396 bytes (57%) of program storage space. Maximum is 32256 bytes.
Global variables use 633 bytes (30%) of dynamic memory, leaving 1415 bytes for local variables. Maximum is 2048 bytes.

examples/HM-SEC-MDIR

Result: PASS

Sketch uses 18670 bytes (57%) of program storage space. Maximum is 32256 bytes.
Global variables use 664 bytes (32%) of dynamic memory, leaving 1384 bytes for local variables. Maximum is 2048 bytes.

examples/HM-SEC-RHS

Result: PASS

Sketch uses 19762 bytes (61%) of program storage space. Maximum is 32256 bytes.
Global variables use 675 bytes (32%) of dynamic memory, leaving 1373 bytes for local variables. Maximum is 2048 bytes.

examples/HM-SEC-SD

Result: PASS

Sketch uses 17502 bytes (54%) of program storage space. Maximum is 32256 bytes.
Global variables use 628 bytes (30%) of dynamic memory, leaving 1420 bytes for local variables. Maximum is 2048 bytes.

examples/HM-SEC-WDS

Result: PASS

Sketch uses 19542 bytes (60%) of program storage space. Maximum is 32256 bytes.
Global variables use 681 bytes (33%) of dynamic memory, leaving 1367 bytes for local variables. Maximum is 2048 bytes.

examples/HM-SEN-MDIR-WM55

Result: FAIL

Multiple libraries were found for "LowPower.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/LowPower_LowPowerLab
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Low-Power

examples/HM-WDS10-TH-O

Result: FAIL

In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AskSinPP/examples/HM-WDS10-TH-O/HM-WDS10-TH-O.ino:18:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AskSinPP/sensors/Sht10.h:10:10: fatal error: Sensirion.h: No such file or directory
 #include <Sensirion.h>
          ^~~~~~~~~~~~~
compilation terminated.
Multiple libraries were found for "LowPower.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/LowPower_LowPowerLab
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Low-Power

examples/HM-WDS100-C6-O-2

Result: PASS

Sketch uses 17572 bytes (54%) of program storage space. Maximum is 32256 bytes.
Global variables use 646 bytes (31%) of dynamic memory, leaving 1402 bytes for local variables. Maximum is 2048 bytes.

examples/HM-WDS40-TH-I

Result: PASS

Sketch uses 25168 bytes (78%) of program storage space. Maximum is 32256 bytes.
Global variables use 962 bytes (46%) of dynamic memory, leaving 1086 bytes for local variables. Maximum is 2048 bytes.

examples/custom

Result: FAIL

examples/max

Result: FAIL

examples/stm32

Result: FAIL

examples/tests

Result: FAIL

arduino:mbed_nano:nanorp2040connect @ 2.7.2

Inclusion

Result: FAIL

WARNING: library AskSinPP claims to run on avr, STM32F1 architecture(s) and may be incompatible with your current board which runs on mbed_nano architecture(s).
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AskSinPP/AskSinPP.h:51:0,
                 from /tmp/arduino-testlib265429828/test/test.ino:1:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AskSinPP/Storage.h: In member function 'uint16_t as::InternalEprom::size()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AskSinPP/Storage.h:93:12: error: 'E2END' was not declared in this scope
     return E2END + 1; // last EEPROM address + 1
            ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AskSinPP/Storage.h: In member function 'uint8_t as::InternalEprom::getByte(uint16_t)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AskSinPP/Storage.h:112:5: error: 'eeprom_read_block' was not declared in this scope
     eeprom_read_block(&b,(void*)(uintptr_t)addr,1);
     ^~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AskSinPP/Storage.h:112:5: note: suggested alternative: 'pgm_read_float'
     eeprom_read_block(&b,(void*)(uintptr_t)addr,1);
     ^~~~~~~~~~~~~~~~~
     pgm_read_float
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AskSinPP/Storage.h: In member function 'bool as::InternalEprom::setByte(uint16_t, uint8_t)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AskSinPP/Storage.h:118:5: error: 'eeprom_write_block' was not declared in this scope
     eeprom_write_block(&b,(void*)(uintptr_t)addr,1);
     ^~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AskSinPP/Storage.h:118:5: note: suggested alternative: 'spi_write_blocking'
     eeprom_write_block(&b,(void*)(uintptr_t)addr,1);
     ^~~~~~~~~~~~~~~~~~
     spi_write_blocking
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AskSinPP/Storage.h: In member function 'bool as::InternalEprom::setData(uint16_t, uint8_t*, uint16_t)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AskSinPP/Storage.h:123:5: error: 'eeprom_write_block' was not declared in this scope
     eeprom_write_block(buf,(void*)(uintptr_t)addr,size);
     ^~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AskSinPP/Storage.h:123:5: note: suggested alternative: 'spi_write_blocking'
     eeprom_write_block(buf,(void*)(uintptr_t)addr,size);
     ^~~~~~~~~~~~~~~~~~
     spi_write_blocking
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AskSinPP/Storage.h: In member function 'bool as::InternalEprom::getData(uint16_t, uint8_t*, uint16_t)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AskSinPP/Storage.h:128:5: error: 'eeprom_read_block' was not declared in this scope
     eeprom_read_block(buf,(const void*)(uintptr_t)addr,size);
     ^~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AskSinPP/Storage.h:128:5: note: suggested alternative: 'pgm_read_float'
     eeprom_read_block(buf,(const void*)(uintptr_t)addr,size);
     ^~~~~~~~~~~~~~~~~
     pgm_read_float
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AskSinPP/Activity.h:11:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AskSinPP/AskSinPP.h:54,
                 from /tmp/arduino-testlib265429828/test/test.ino:1:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AskSinPP/Radio.h: In member function 'void as::CC1101<SPIType>::setIdle()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AskSinPP/Radio.h:404:7: error: there are no arguments to '_delay_us' that depend on a template parameter, so a declaration of '_delay_us' must be available [-fpermissive]
       _delay_us(10);
       ^~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AskSinPP/Radio.h:404:7: note: (if you use '-fpermissive', G++ will accept your code, but allowing the use of an undeclared name is deprecated)
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AskSinPP/Radio.h: In member function 'uint8_t as::CC1101<SPIType>::reset()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AskSinPP/Radio.h:446:5: error: there are no arguments to '_delay_us' that depend on a template parameter, so a declaration of '_delay_us' must be available [-fpermissive]
     _delay_us(50);
     ^~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AskSinPP/Radio.h: In member function 'bool as::CC1101<SPIType>::init()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AskSinPP/Radio.h:626:5: error: there are no arguments to '_delay_ms' that depend on a template parameter, so a declaration of '_delay_ms' must be available [-fpermissive]
     _delay_ms(23);
     ^~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AskSinPP/Radio.h: In member function 'bool as::CC1101<SPIType>::initReg(uint8_t, uint8_t, uint8_t)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AskSinPP/Radio.h:647:9: error: there are no arguments to '_delay_ms' that depend on a template parameter, so a declaration of '_delay_ms' must be available [-fpermissive]
         _delay_ms(1);
         ^~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AskSinPP/Radio.h: In member function 'uint8_t as::CC1101<SPIType>::sndData(uint8_t*, uint8_t, uint8_t)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AskSinPP/Radio.h:694:7: error: there are no arguments to '_delay_us' that depend on a template parameter, so a declaration of '_delay_us' must be available [-fpermissive]
       _delay_us(100);
       ^~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AskSinPP/Radio.h:708:5: error: there are no arguments to '_delay_ms' that depend on a template parameter, so a declaration of '_delay_ms' must be available [-fpermissive]
     _delay_ms(10);
     ^~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AskSinPP/Radio.h:710:7: error: there are no arguments to '_delay_ms' that depend on a template parameter, so a declaration of '_delay_ms' must be available [-fpermissive]
       _delay_ms(350);    // according to ELV, devices get activated every 300ms, so send burst for 360ms
       ^~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AskSinPP/Radio.h:719:7: error: there are no arguments to '_delay_us' that depend on a template parameter, so a declaration of '_delay_us' must be available [-fpermissive]
       _delay_us(100);
       ^~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AskSinPP/Radio.h: In member function 'uint8_t as::CC1101<SPIType>::rcvData(uint8_t*, uint8_t)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AskSinPP/Radio.h:756:5: error: there are no arguments to '_delay_us' that depend on a template parameter, so a declaration of '_delay_us' must be available [-fpermissive]
     _delay_us(190);
     ^~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AskSinPP/Radio.h: In member function 'void as::Radio<SPIType, GDO0, SENDDELAY, HWRADIO>::MinSendTimeout::waitTimeout()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AskSinPP/Radio.h:782:11: error: there are no arguments to '_delay_ms' that depend on a template parameter, so a declaration of '_delay_ms' must be available [-fpermissive]
           _delay_ms(1);
           ^~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AskSinPP/Radio.h: In member function 'bool as::Radio<SPIType, GDO0, SENDDELAY, HWRADIO>::detectBurst()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AskSinPP/Radio.h:876:7: error: there are no arguments to '_delay_ms' that depend on a template parameter, so a declaration of '_delay_ms' must be available [-fpermissive]
       _delay_ms(3);
       ^~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AskSinPP/Radio.h: In member function 'uint8_t as::Radio<SPIType, GDO0, SENDDELAY, HWRADIO>::read(as::Message&, uint32_t)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AskSinPP/Radio.h:931:9: error: there are no arguments to '_delay_ms' that depend on a template parameter, so a declaration of '_delay_ms' must be available [-fpermissive]
         _delay_ms(50); // wait 50ms
         ^~~~~~~~~
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AskSinPP/AskSinPP.h:59:0,
                 from /tmp/arduino-testlib265429828/test/test.ino:1:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AskSinPP/Button.h: At global scope:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AskSinPP/Button.h:17:53: error: 'WiringPinMode' has not been declared
 template <uint8_t OFFSTATE=HIGH,uint8_t ONSTATE=LOW,WiringPinMode MODE=INPUT_PULLUP>
                                                     ^~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AskSinPP/Button.h: In member function 'void as::StateButton<OFFSTATE, ONSTATE, <declaration error> >::init(uint8_t)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AskSinPP/Button.h:161:18: error: 'MODE' was not declared in this scope
     pinMode(pin, MODE);
                  ^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AskSinPP/Button.h:161:18: note: suggested alternative: 'MOSI'
     pinMode(pin, MODE);
                  ^~~~
                  MOSI
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AskSinPP/Button.h: At global scope:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AskSinPP/Button.h:168:67: error: 'WiringPinMode' has not been declared
 template <class DEVTYPE,uint8_t OFFSTATE=HIGH,uint8_t ONSTATE=LOW,WiringPinMode MODE=INPUT_PULLUP>
                                                                   ^~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AskSinPP/Button.h:169:58: error: 'MODE' was not declared in this scope
 class ConfigButton : public StateButton<OFFSTATE,ONSTATE,MOD

examples/FreqTest

Result: FAIL

WARNING: library AskSinPP claims to run on avr, STM32F1 architecture(s) and may be incompatible with your current board which runs on mbed_nano architecture(s).
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AskSinPP/AskSinPP.h:51:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AskSinPP/examples/FreqTest/FreqTest.ino:20:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AskSinPP/Storage.h: In member function 'uint16_t as::InternalEprom::size()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AskSinPP/Storage.h:93:12: error: 'E2END' was not declared in this scope
     return E2END + 1; // last EEPROM address + 1
            ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AskSinPP/Storage.h: In member function 'uint8_t as::InternalEprom::getByte(uint16_t)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AskSinPP/Storage.h:112:5: error: 'eeprom_read_block' was not declared in this scope
     eeprom_read_block(&b,(void*)(uintptr_t)addr,1);
     ^~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AskSinPP/Storage.h:112:5: note: suggested alternative: 'pgm_read_float'
     eeprom_read_block(&b,(void*)(uintptr_t)addr,1);
     ^~~~~~~~~~~~~~~~~
     pgm_read_float
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AskSinPP/Storage.h: In member function 'bool as::InternalEprom::setByte(uint16_t, uint8_t)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AskSinPP/Storage.h:118:5: error: 'eeprom_write_block' was not declared in this scope
     eeprom_write_block(&b,(void*)(uintptr_t)addr,1);
     ^~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AskSinPP/Storage.h:118:5: note: suggested alternative: 'spi_write_blocking'
     eeprom_write_block(&b,(void*)(uintptr_t)addr,1);
     ^~~~~~~~~~~~~~~~~~
     spi_write_blocking
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AskSinPP/Storage.h: In member function 'bool as::InternalEprom::setData(uint16_t, uint8_t*, uint16_t)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AskSinPP/Storage.h:123:5: error: 'eeprom_write_block' was not declared in this scope
     eeprom_write_block(buf,(void*)(uintptr_t)addr,size);
     ^~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AskSinPP/Storage.h:123:5: note: suggested alternative: 'spi_write_blocking'
     eeprom_write_block(buf,(void*)(uintptr_t)addr,size);
     ^~~~~~~~~~~~~~~~~~
     spi_write_blocking
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AskSinPP/Storage.h: In member function 'bool as::InternalEprom::getData(uint16_t, uint8_t*, uint16_t)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AskSinPP/Storage.h:128:5: error: 'eeprom_read_block' was not declared in this scope
     eeprom_read_block(buf,(const void*)(uintptr_t)addr,size);
     ^~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AskSinPP/Storage.h:128:5: note: suggested alternative: 'pgm_read_float'
     eeprom_read_block(buf,(const void*)(uintptr_t)addr,size);
     ^~~~~~~~~~~~~~~~~
     pgm_read_float
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AskSinPP/Activity.h:11:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AskSinPP/AskSinPP.h:54,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AskSinPP/examples/FreqTest/FreqTest.ino:20:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AskSinPP/Radio.h: In member function 'void as::CC1101<SPIType>::setIdle()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AskSinPP/Radio.h:404:7: error: there are no arguments to '_delay_us' that depend on a template parameter, so a declaration of '_delay_us' must be available [-fpermissive]
       _delay_us(10);
       ^~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AskSinPP/Radio.h:404:7: note: (if you use '-fpermissive', G++ will accept your code, but allowing the use of an undeclared name is deprecated)
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AskSinPP/Radio.h: In member function 'uint8_t as::CC1101<SPIType>::reset()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AskSinPP/Radio.h:446:5: error: there are no arguments to '_delay_us' that depend on a template parameter, so a declaration of '_delay_us' must be available [-fpermissive]
     _delay_us(50);
     ^~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AskSinPP/Radio.h: In member function 'bool as::CC1101<SPIType>::init()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AskSinPP/Radio.h:626:5: error: there are no arguments to '_delay_ms' that depend on a template parameter, so a declaration of '_delay_ms' must be available [-fpermissive]
     _delay_ms(23);
     ^~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AskSinPP/Radio.h: In member function 'bool as::CC1101<SPIType>::initReg(uint8_t, uint8_t, uint8_t)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AskSinPP/Radio.h:647:9: error: there are no arguments to '_delay_ms' that depend on a template parameter, so a declaration of '_delay_ms' must be available [-fpermissive]
         _delay_ms(1);
         ^~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AskSinPP/Radio.h: In member function 'uint8_t as::CC1101<SPIType>::sndData(uint8_t*, uint8_t, uint8_t)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AskSinPP/Radio.h:694:7: error: there are no arguments to '_delay_us' that depend on a template parameter, so a declaration of '_delay_us' must be available [-fpermissive]
       _delay_us(100);
       ^~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AskSinPP/Radio.h:708:5: error: there are no arguments to '_delay_ms' that depend on a template parameter, so a declaration of '_delay_ms' must be available [-fpermissive]
     _delay_ms(10);
     ^~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AskSinPP/Radio.h:710:7: error: there are no arguments to '_delay_ms' that depend on a template parameter, so a declaration of '_delay_ms' must be available [-fpermissive]
       _delay_ms(350);    // according to ELV, devices get activated every 300ms, so send burst for 360ms
       ^~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AskSinPP/Radio.h:719:7: error: there are no arguments to '_delay_us' that depend on a template parameter, so a declaration of '_delay_us' must be available [-fpermissive]
       _delay_us(100);
       ^~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AskSinPP/Radio.h: In member function 'uint8_t as::CC1101<SPIType>::rcvData(uint8_t*, uint8_t)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AskSinPP/Radio.h:756:5: error: there are no arguments to '_delay_us' that depend on a template parameter, so a declaration of '_delay_us' must be available [-fpermissive]
     _delay_us(190);
     ^~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AskSinPP/Radio.h: In member function 'void as::Radio<SPIType, GDO0, SENDDELAY, HWRADIO>::MinSendTimeout::waitTimeout()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AskSinPP/Radio.h:782:11: error: there are no arguments to '_delay_ms' that depend on a template parameter, so a declaration of '_delay_ms' must be available [-fpermissive]
           _delay_ms(1);
           ^~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AskSinPP/Radio.h: In member function 'bool as::Radio<SPIType, GDO0, SENDDELAY, HWRADIO>::detectBurst()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AskSinPP/Radio.h:876:7: error: there are no arguments to '_delay_ms' that depend on a template parameter, so a declaration of '_delay_ms' must be available [-fpermissive]
       _delay_ms(3);
       ^~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AskSinPP/Radio.h: In member function 'uint8_t as::Radio<SPIType, GDO0, SENDDELAY, HWRADIO>::read(as::Message&, uint32_t)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AskSinPP/Radio.h:931:9: error: there are no arguments to '_delay_ms' that depend on a template parameter, so a declaration of '_delay_ms' must be available [-fpermissive]
         _delay_ms(50); // wait 50ms
         ^~~~~~~~~
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AskSinPP/AskSinPP.h:59:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AskSinPP/examples/FreqTest/FreqTest.ino:20:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AskSinPP/Button.h: At global scope:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AskSinPP/Button.h:17:53: error: 'WiringPinMode' has not been declared
 template <uint8_t OFFSTATE=HIGH,uint8_t ONSTATE=LOW,WiringPinMode MODE=INPUT_PULLUP>
                                                     ^~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AskSinPP/Button.h: In member function 'void as::StateButton<OFFSTATE, ONSTATE, <declaration error> >::init(uint8_t)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AskSinPP/Button.h:161:18: error: 'MODE' was not declared in this scope
     pinMode(pin, MODE);
                  ^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AskSinPP/Button.h:161:18: note: suggested alternative: 'MOSI'
     pinMode(pin, MODE);
                  ^~~~
                  MOSI
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AskSinPP/Button.h: At global scope:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AskSinPP/Button.h:168:67: error: 'WiringPinMode' has not been declared
 template <class DEVTYPE,uint8_t OFFSTATE=HIGH,uint8_t ONSTATE=LOW,WiringPinMode MODE=INPUT_PULLUP>
                                                                   ^~~~~~~~~~~~~
/home/ec2-user/arduino-te

examples/HM-DW-WM

Result: FAIL

WARNING: library AskSinPP claims to run on avr, STM32F1 architecture(s) and may be incompatible with your current board which runs on mbed_nano architecture(s).
WARNING: library LowPower_LowPowerLab claims to run on avr, samd architecture(s) and may be incompatible with your current board which runs on mbed_nano architecture(s).
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AskSinPP/examples/HM-DW-WM/HM-DW-WM.ino:10:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EnableInterrupt/EnableInterrupt.h:1279:2: error: #error Unsupported Arduino platform
 #error Unsupported Arduino platform
  ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EnableInterrupt/EnableInterrupt.h:1450:2: error: #error Unsupported Arduino platform
 #error Unsupported Arduino platform
  ^~~~~
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AskSinPP/examples/HM-DW-WM/HM-DW-WM.ino:12:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/LowPower_LowPowerLab/LowPower.h:161:6: error: #error "Please ensure chosen MCU is a SAMD21"
     #error "Please ensure chosen MCU is a SAMD21"
      ^~~~~
Multiple libraries were found for "LowPower.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/LowPower_LowPowerLab
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Low-Power

examples/HM-ES-TX-WM

Result: FAIL

WARNING: library AskSinPP claims to run on avr, STM32F1 architecture(s) and may be incompatible with your current board which runs on mbed_nano architecture(s).
WARNING: library LowPower_LowPowerLab claims to run on avr, samd architecture(s) and may be incompatible with your current board which runs on mbed_nano architecture(s).
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AskSinPP/examples/HM-ES-TX-WM/HM-ES-TX-WM.ino:10:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EnableInterrupt/EnableInterrupt.h:1279:2: error: #error Unsupported Arduino platform
 #error Unsupported Arduino platform
  ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EnableInterrupt/EnableInterrupt.h:1450:2: error: #error Unsupported Arduino platform
 #error Unsupported Arduino platform
  ^~~~~
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AskSinPP/examples/HM-ES-TX-WM/HM-ES-TX-WM.ino:12:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/LowPower_LowPowerLab/LowPower.h:161:6: error: #error "Please ensure chosen MCU is a SAMD21"
     #error "Please ensure chosen MCU is a SAMD21"
      ^~~~~
Multiple libraries were found for "LowPower.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/LowPower_LowPowerLab
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Low-Power

examples/HM-LC-Bl1-FM

Result: FAIL

WARNING: library AskSinPP claims to run on avr, STM32F1 architecture(s) and may be incompatible with your current board which runs on mbed_nano architecture(s).
WARNING: library LowPower_LowPowerLab claims to run on avr, samd architecture(s) and may be incompatible with your current board which runs on mbed_nano architecture(s).
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AskSinPP/examples/HM-LC-Bl1-FM/HM-LC-Bl1-FM.ino:10:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EnableInterrupt/EnableInterrupt.h:1279:2: error: #error Unsupported Arduino platform
 #error Unsupported Arduino platform
  ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EnableInterrupt/EnableInterrupt.h:1450:2: error: #error Unsupported Arduino platform
 #error Unsupported Arduino platform
  ^~~~~
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AskSinPP/examples/HM-LC-Bl1-FM/HM-LC-Bl1-FM.ino:12:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/LowPower_LowPowerLab/LowPower.h:161:6: error: #error "Please ensure chosen MCU is a SAMD21"
     #error "Please ensure chosen MCU is a SAMD21"
      ^~~~~
Multiple libraries were found for "LowPower.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/LowPower_LowPowerLab
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Low-Power

examples/HM-LC-DW-WM

Result: FAIL

WARNING: library AskSinPP claims to run on avr, STM32F1 architecture(s) and may be incompatible with your current board which runs on mbed_nano architecture(s).
WARNING: library LowPower_LowPowerLab claims to run on avr, samd architecture(s) and may be incompatible with your current board which runs on mbed_nano architecture(s).
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AskSinPP/examples/HM-LC-DW-WM/HM-LC-DW-WM.ino:10:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EnableInterrupt/EnableInterrupt.h:1279:2: error: #error Unsupported Arduino platform
 #error Unsupported Arduino platform
  ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EnableInterrupt/EnableInterrupt.h:1450:2: error: #error Unsupported Arduino platform
 #error Unsupported Arduino platform
  ^~~~~
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AskSinPP/examples/HM-LC-DW-WM/HM-LC-DW-WM.ino:12:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/LowPower_LowPowerLab/LowPower.h:161:6: error: #error "Please ensure chosen MCU is a SAMD21"
     #error "Please ensure chosen MCU is a SAMD21"
      ^~~~~
Multiple libraries were found for "LowPower.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/LowPower_LowPowerLab
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Low-Power

examples/HM-LC-Dim1PWM-CV

Result: FAIL

WARNING: library AskSinPP claims to run on avr, STM32F1 architecture(s) and may be incompatible with your current board which runs on mbed_nano architecture(s).
WARNING: library LowPower_LowPowerLab claims to run on avr, samd architecture(s) and may be incompatible with your current board which runs on mbed_nano architecture(s).
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AskSinPP/examples/HM-LC-Dim1PWM-CV/HM-LC-Dim1PWM-CV.ino:10:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EnableInterrupt/EnableInterrupt.h:1279:2: error: #error Unsupported Arduino platform
 #error Unsupported Arduino platform
  ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EnableInterrupt/EnableInterrupt.h:1450:2: error: #error Unsupported Arduino platform
 #error Unsupported Arduino platform
  ^~~~~
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AskSinPP/examples/HM-LC-Dim1PWM-CV/HM-LC-Dim1PWM-CV.ino:12:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/LowPower_LowPowerLab/LowPower.h:161:6: error: #error "Please ensure chosen MCU is a SAMD21"
     #error "Please ensure chosen MCU is a SAMD21"
      ^~~~~
Multiple libraries were found for "LowPower.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/LowPower_LowPowerLab
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Low-Power

examples/HM-LC-Dim1TPBU-FM

Result: FAIL

WARNING: library AskSinPP claims to run on avr, STM32F1 architecture(s) and may be incompatible with your current board which runs on mbed_nano architecture(s).
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AskSinPP/examples/HM-LC-Dim1TPBU-FM/HM-LC-Dim1TPBU-FM.ino:28:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EnableInterrupt/EnableInterrupt.h:1279:2: error: #error Unsupported Arduino platform
 #error Unsupported Arduino platform
  ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EnableInterrupt/EnableInterrupt.h:1450:2: error: #error Unsupported Arduino platform
 #error Unsupported Arduino platform
  ^~~~~

examples/HM-LC-SW1-BA-PCB

Result: FAIL

WARNING: library AskSinPP claims to run on avr, STM32F1 architecture(s) and may be incompatible with your current board which runs on mbed_nano architecture(s).
WARNING: library LowPower_LowPowerLab claims to run on avr, samd architecture(s) and may be incompatible with your current board which runs on mbed_nano architecture(s).
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AskSinPP/examples/HM-LC-SW1-BA-PCB/HM-LC-SW1-BA-PCB.ino:11:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EnableInterrupt/EnableInterrupt.h:1279:2: error: #error Unsupported Arduino platform
 #error Unsupported Arduino platform
  ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EnableInterrupt/EnableInterrupt.h:1450:2: error: #error Unsupported Arduino platform
 #error Unsupported Arduino platform
  ^~~~~
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AskSinPP/examples/HM-LC-SW1-BA-PCB/HM-LC-SW1-BA-PCB.ino:13:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/LowPower_LowPowerLab/LowPower.h:161:6: error: #error "Please ensure chosen MCU is a SAMD21"
     #error "Please ensure chosen MCU is a SAMD21"
      ^~~~~
Multiple libraries were found for "LowPower.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/LowPower_LowPowerLab
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Low-Power

examples/HM-LC-SWX-SM

Result: FAIL

WARNING: library AskSinPP claims to run on avr, STM32F1 architecture(s) and may be incompatible with your current board which runs on mbed_nano architecture(s).
WARNING: library LowPower_LowPowerLab claims to run on avr, samd architecture(s) and may be incompatible with your current board which runs on mbed_nano architecture(s).
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AskSinPP/examples/HM-LC-SWX-SM/HM-LC-SWX-SM.ino:23:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EnableInterrupt/EnableInterrupt.h:1279:2: error: #error Unsupported Arduino platform
 #error Unsupported Arduino platform
  ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EnableInterrupt/EnableInterrupt.h:1450:2: error: #error Unsupported Arduino platform
 #error Unsupported Arduino platform
  ^~~~~
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AskSinPP/examples/HM-LC-SWX-SM/HM-LC-SWX-SM.ino:25:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/LowPower_LowPowerLab/LowPower.h:161:6: error: #error "Please ensure chosen MCU is a SAMD21"
     #error "Please ensure chosen MCU is a SAMD21"
      ^~~~~
Multiple libraries were found for "LowPower.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/LowPower_LowPowerLab
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Low-Power

examples/HM-RC-4

Result: FAIL

WARNING: library AskSinPP claims to run on avr, STM32F1 architecture(s) and may be incompatible with your current board which runs on mbed_nano architecture(s).
WARNING: library LowPower_LowPowerLab claims to run on avr, samd architecture(s) and may be incompatible with your current board which runs on mbed_nano architecture(s).
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AskSinPP/examples/HM-RC-4/HM-RC-4.ino:10:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EnableInterrupt/EnableInterrupt.h:1279:2: error: #error Unsupported Arduino platform
 #error Unsupported Arduino platform
  ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EnableInterrupt/EnableInterrupt.h:1450:2: error: #error Unsupported Arduino platform
 #error Unsupported Arduino platform
  ^~~~~
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AskSinPP/examples/HM-RC-4/HM-RC-4.ino:13:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/LowPower_LowPowerLab/LowPower.h:161:6: error: #error "Please ensure chosen MCU is a SAMD21"
     #error "Please ensure chosen MCU is a SAMD21"
      ^~~~~
Multiple libraries were found for "LowPower.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/LowPower_LowPowerLab
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Low-Power

examples/HM-RC-8

Result: FAIL

WARNING: library AskSinPP claims to run on avr, STM32F1 architecture(s) and may be incompatible with your current board which runs on mbed_nano architecture(s).
WARNING: library LowPower_LowPowerLab claims to run on avr, samd architecture(s) and may be incompatible with your current board which runs on mbed_nano architecture(s).
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AskSinPP/examples/HM-RC-8/HM-RC-8.ino:10:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EnableInterrupt/EnableInterrupt.h:1279:2: error: #error Unsupported Arduino platform
 #error Unsupported Arduino platform
  ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EnableInterrupt/EnableInterrupt.h:1450:2: error: #error Unsupported Arduino platform
 #error Unsupported Arduino platform
  ^~~~~
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AskSinPP/examples/HM-RC-8/HM-RC-8.ino:12:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/LowPower_LowPowerLab/LowPower.h:161:6: error: #error "Please ensure chosen MCU is a SAMD21"
     #error "Please ensure chosen MCU is a SAMD21"
      ^~~~~
Multiple libraries were found for "LowPower.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/LowPower_LowPowerLab
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Low-Power

examples/HM-RC-P1

Result: FAIL

WARNING: library AskSinPP claims to run on avr, STM32F1 architecture(s) and may be incompatible with your current board which runs on mbed_nano architecture(s).
WARNING: library LowPower_LowPowerLab claims to run on avr, samd architecture(s) and may be incompatible with your current board which runs on mbed_nano architecture(s).
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AskSinPP/examples/HM-RC-P1/HM-RC-P1.ino:10:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EnableInterrupt/EnableInterrupt.h:1279:2: error: #error Unsupported Arduino platform
 #error Unsupported Arduino platform
  ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EnableInterrupt/EnableInterrupt.h:1450:2: error: #error Unsupported Arduino platform
 #error Unsupported Arduino platform
  ^~~~~
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AskSinPP/examples/HM-RC-P1/HM-RC-P1.ino:12:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/LowPower_LowPowerLab/LowPower.h:161:6: error: #error "Please ensure chosen MCU is a SAMD21"
     #error "Please ensure chosen MCU is a SAMD21"
      ^~~~~
Multiple libraries were found for "LowPower.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/LowPower_LowPowerLab
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Low-Power

examples/HM-SEC-MDIR

Result: FAIL

WARNING: library AskSinPP claims to run on avr, STM32F1 architecture(s) and may be incompatible with your current board which runs on mbed_nano architecture(s).
WARNING: library LowPower_LowPowerLab claims to run on avr, samd architecture(s) and may be incompatible with your current board which runs on mbed_nano architecture(s).
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AskSinPP/examples/HM-SEC-MDIR/HM-SEC-MDIR.ino:10:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EnableInterrupt/EnableInterrupt.h:1279:2: error: #error Unsupported Arduino platform
 #error Unsupported Arduino platform
  ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EnableInterrupt/EnableInterrupt.h:1450:2: error: #error Unsupported Arduino platform
 #error Unsupported Arduino platform
  ^~~~~
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AskSinPP/examples/HM-SEC-MDIR/HM-SEC-MDIR.ino:12:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/LowPower_LowPowerLab/LowPower.h:161:6: error: #error "Please ensure chosen MCU is a SAMD21"
     #error "Please ensure chosen MCU is a SAMD21"
      ^~~~~
Multiple libraries were found for "LowPower.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/LowPower_LowPowerLab
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Low-Power

examples/HM-SEC-RHS

Result: FAIL

WARNING: library AskSinPP claims to run on avr, STM32F1 architecture(s) and may be incompatible with your current board which runs on mbed_nano architecture(s).
WARNING: library LowPower_LowPowerLab claims to run on avr, samd architecture(s) and may be incompatible with your current board which runs on mbed_nano architecture(s).
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AskSinPP/examples/HM-SEC-RHS/HM-SEC-RHS.ino:34:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EnableInterrupt/EnableInterrupt.h:1279:2: error: #error Unsupported Arduino platform
 #error Unsupported Arduino platform
  ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EnableInterrupt/EnableInterrupt.h:1450:2: error: #error Unsupported Arduino platform
 #error Unsupported Arduino platform
  ^~~~~
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AskSinPP/examples/HM-SEC-RHS/HM-SEC-RHS.ino:36:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/LowPower_LowPowerLab/LowPower.h:161:6: error: #error "Please ensure chosen MCU is a SAMD21"
     #error "Please ensure chosen MCU is a SAMD21"
      ^~~~~
Multiple libraries were found for "LowPower.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/LowPower_LowPowerLab
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Low-Power

examples/HM-SEC-SD

Result: FAIL

WARNING: library AskSinPP claims to run on avr, STM32F1 architecture(s) and may be incompatible with your current board which runs on mbed_nano architecture(s).
WARNING: library LowPower_LowPowerLab claims to run on avr, samd architecture(s) and may be incompatible with your current board which runs on mbed_nano architecture(s).
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AskSinPP/examples/HM-SEC-SD/HM-SEC-SD.ino:11:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EnableInterrupt/EnableInterrupt.h:1279:2: error: #error Unsupported Arduino platform
 #error Unsupported Arduino platform
  ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EnableInterrupt/EnableInterrupt.h:1450:2: error: #error Unsupported Arduino platform
 #error Unsupported Arduino platform
  ^~~~~
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AskSinPP/examples/HM-SEC-SD/HM-SEC-SD.ino:13:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/LowPower_LowPowerLab/LowPower.h:161:6: error: #error "Please ensure chosen MCU is a SAMD21"
     #error "Please ensure chosen MCU is a SAMD21"
      ^~~~~
Multiple libraries were found for "LowPower.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/LowPower_LowPowerLab
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Low-Power

examples/HM-SEC-WDS

Result: FAIL

WARNING: library AskSinPP claims to run on avr, STM32F1 architecture(s) and may be incompatible with your current board which runs on mbed_nano architecture(s).
WARNING: library LowPower_LowPowerLab claims to run on avr, samd architecture(s) and may be incompatible with your current board which runs on mbed_nano architecture(s).
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AskSinPP/examples/HM-SEC-WDS/HM-SEC-WDS.ino:10:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EnableInterrupt/EnableInterrupt.h:1279:2: error: #error Unsupported Arduino platform
 #error Unsupported Arduino platform
  ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EnableInterrupt/EnableInterrupt.h:1450:2: error: #error Unsupported Arduino platform
 #error Unsupported Arduino platform
  ^~~~~
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AskSinPP/examples/HM-SEC-WDS/HM-SEC-WDS.ino:12:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/LowPower_LowPowerLab/LowPower.h:161:6: error: #error "Please ensure chosen MCU is a SAMD21"
     #error "Please ensure chosen MCU is a SAMD21"
      ^~~~~
Multiple libraries were found for "LowPower.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/LowPower_LowPowerLab
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Low-Power

examples/HM-SEN-MDIR-WM55

Result: FAIL

WARNING: library AskSinPP claims to run on avr, STM32F1 architecture(s) and may be incompatible with your current board which runs on mbed_nano architecture(s).
WARNING: library LowPower_LowPowerLab claims to run on avr, samd architecture(s) and may be incompatible with your current board which runs on mbed_nano architecture(s).
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AskSinPP/examples/HM-SEN-MDIR-WM55/HM-SEN-MDIR-WM55.ino:12:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EnableInterrupt/EnableInterrupt.h:1279:2: error: #error Unsupported Arduino platform
 #error Unsupported Arduino platform
  ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EnableInterrupt/EnableInterrupt.h:1450:2: error: #error Unsupported Arduino platform
 #error Unsupported Arduino platform
  ^~~~~
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AskSinPP/examples/HM-SEN-MDIR-WM55/HM-SEN-MDIR-WM55.ino:14:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/LowPower_LowPowerLab/LowPower.h:161:6: error: #error "Please ensure chosen MCU is a SAMD21"
     #error "Please ensure chosen MCU is a SAMD21"
      ^~~~~
Multiple libraries were found for "LowPower.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/LowPower_LowPowerLab
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Low-Power

examples/HM-WDS10-TH-O

Result: FAIL

In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AskSinPP/examples/HM-WDS10-TH-O/HM-WDS10-TH-O.ino:11:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EnableInterrupt/EnableInterrupt.h:1279:2: error: #error Unsupported Arduino platform
 #error Unsupported Arduino platform
  ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EnableInterrupt/EnableInterrupt.h:1450:2: error: #error Unsupported Arduino platform
 #error Unsupported Arduino platform
  ^~~~~
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AskSinPP/examples/HM-WDS10-TH-O/HM-WDS10-TH-O.ino:13:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/LowPower_LowPowerLab/LowPower.h:161:6: error: #error "Please ensure chosen MCU is a SAMD21"
     #error "Please ensure chosen MCU is a SAMD21"
      ^~~~~
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AskSinPP/examples/HM-WDS10-TH-O/HM-WDS10-TH-O.ino:18:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AskSinPP/sensors/Sht10.h:10:10: fatal error: Sensirion.h: No such file or directory
 #include <Sensirion.h>
          ^~~~~~~~~~~~~
compilation terminated.
Multiple libraries were found for "LowPower.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/LowPower_LowPowerLab
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Low-Power

examples/HM-WDS100-C6-O-2

Result: FAIL

WARNING: library AskSinPP claims to run on avr, STM32F1 architecture(s) and may be incompatible with your current board which runs on mbed_nano architecture(s).
WARNING: library LowPower_LowPowerLab claims to run on avr, samd architecture(s) and may be incompatible with your current board which runs on mbed_nano architecture(s).
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AskSinPP/examples/HM-WDS100-C6-O-2/HM-WDS100-C6-O-2.ino:10:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EnableInterrupt/EnableInterrupt.h:1279:2: error: #error Unsupported Arduino platform
 #error Unsupported Arduino platform
  ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EnableInterrupt/EnableInterrupt.h:1450:2: error: #error Unsupported Arduino platform
 #error Unsupported Arduino platform
  ^~~~~
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AskSinPP/examples/HM-WDS100-C6-O-2/HM-WDS100-C6-O-2.ino:12:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/LowPower_LowPowerLab/LowPower.h:161:6: error: #error "Please ensure chosen MCU is a SAMD21"
     #error "Please ensure chosen MCU is a SAMD21"
      ^~~~~
Multiple libraries were found for "LowPower.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/LowPower_LowPowerLab
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Low-Power

examples/HM-WDS40-TH-I

Result: FAIL

WARNING: library AskSinPP claims to run on avr, STM32F1 architecture(s) and may be incompatible with your current board which runs on mbed_nano architecture(s).
WARNING: library LowPower_LowPowerLab claims to run on avr, samd architecture(s) and may be incompatible with your current board which runs on mbed_nano architecture(s).
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AskSinPP/examples/HM-WDS40-TH-I/HM-WDS40-TH-I.ino:11:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EnableInterrupt/EnableInterrupt.h:1279:2: error: #error Unsupported Arduino platform
 #error Unsupported Arduino platform
  ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EnableInterrupt/EnableInterrupt.h:1450:2: error: #error Unsupported Arduino platform
 #error Unsupported Arduino platform
  ^~~~~
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AskSinPP/examples/HM-WDS40-TH-I/HM-WDS40-TH-I.ino:13:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/LowPower_LowPowerLab/LowPower.h:161:6: error: #error "Please ensure chosen MCU is a SAMD21"
     #error "Please ensure chosen MCU is a SAMD21"
      ^~~~~
Multiple libraries were found for "LowPower.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/LowPower_LowPowerLab
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Low-Power

examples/custom

Result: FAIL

examples/max

Result: FAIL

examples/stm32

Result: FAIL

examples/tests

Result: FAIL

arduino:megaavr:nona4809 @ 1.8.7

Inclusion

Result: FAIL

WARNING: library AskSinPP claims to run on avr, STM32F1 architecture(s) and may be incompatible with your current board which runs on megaavr architecture(s).
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AskSinPP/AskSinPP.h:51:0,
                 from /tmp/arduino-testlib265429828/test/test.ino:1:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AskSinPP/Storage.h: In member function 'uint8_t as::InternalEprom::getByte(uint16_t)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AskSinPP/Storage.h:112:5: error: 'eeprom_read_block' was not declared in this scope
     eeprom_read_block(&b,(void*)(uintptr_t)addr,1);
     ^~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AskSinPP/Storage.h:112:5: note: suggested alternative: 'pgm_read_float'
     eeprom_read_block(&b,(void*)(uintptr_t)addr,1);
     ^~~~~~~~~~~~~~~~~
     pgm_read_float
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AskSinPP/Storage.h: In member function 'bool as::InternalEprom::setByte(uint16_t, uint8_t)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AskSinPP/Storage.h:118:5: error: 'eeprom_write_block' was not declared in this scope
     eeprom_write_block(&b,(void*)(uintptr_t)addr,1);
     ^~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AskSinPP/Storage.h: In member function 'bool as::InternalEprom::setData(uint16_t, uint8_t*, uint16_t)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AskSinPP/Storage.h:123:5: error: 'eeprom_write_block' was not declared in this scope
     eeprom_write_block(buf,(void*)(uintptr_t)addr,size);
     ^~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AskSinPP/Storage.h: In member function 'bool as::InternalEprom::getData(uint16_t, uint8_t*, uint16_t)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AskSinPP/Storage.h:128:5: error: 'eeprom_read_block' was not declared in this scope
     eeprom_read_block(buf,(const void*)(uintptr_t)addr,size);
     ^~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AskSinPP/Storage.h:128:5: note: suggested alternative: 'pgm_read_float'
     eeprom_read_block(buf,(const void*)(uintptr_t)addr,size);
     ^~~~~~~~~~~~~~~~~
     pgm_read_float
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AskSinPP/Alarm.h:9:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AskSinPP/Pins.h:6,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AskSinPP/AskSinPP.h:52,
                 from /tmp/arduino-testlib265429828/test/test.ino:1:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AskSinPP/Link.h: In member function 'as::Link* as::Link::select() const':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AskSinPP/Link.h:23:19: error: 'ATOMIC_RESTORESTATE' was not declared in this scope
     ATOMIC_BLOCK( ATOMIC_RESTORESTATE ) {
                   ^~~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AskSinPP/Link.h:23:19: note: suggested alternative: '__ATOMIC_RELEASE'
     ATOMIC_BLOCK( ATOMIC_RESTORESTATE ) {
                   ^~~~~~~~~~~~~~~~~~~
                   __ATOMIC_RELEASE
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AskSinPP/Link.h:23:5: error: 'ATOMIC_BLOCK' was not declared in this scope
     ATOMIC_BLOCK( ATOMIC_RESTORESTATE ) {
     ^~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AskSinPP/Link.h:23:5: note: suggested alternative: 'ISR_BLOCK'
     ATOMIC_BLOCK( ATOMIC_RESTORESTATE ) {
     ^~~~~~~~~~~~
     ISR_BLOCK
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AskSinPP/Link.h: In member function 'void as::Link::select(as::Link*)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AskSinPP/Link.h:31:19: error: 'ATOMIC_RESTORESTATE' was not declared in this scope
     ATOMIC_BLOCK( ATOMIC_RESTORESTATE ) {
                   ^~~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AskSinPP/Link.h:31:19: note: suggested alternative: '__ATOMIC_RELEASE'
     ATOMIC_BLOCK( ATOMIC_RESTORESTATE ) {
                   ^~~~~~~~~~~~~~~~~~~
                   __ATOMIC_RELEASE
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AskSinPP/Link.h:31:5: error: 'ATOMIC_BLOCK' was not declared in this scope
     ATOMIC_BLOCK( ATOMIC_RESTORESTATE ) {
     ^~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AskSinPP/Link.h:31:5: note: suggested alternative: 'ISR_BLOCK'
     ATOMIC_BLOCK( ATOMIC_RESTORESTATE ) {
     ^~~~~~~~~~~~
     ISR_BLOCK
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AskSinPP/Link.h: In member function 'void as::Link::append(as::Link&)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AskSinPP/Link.h:38:19: error: 'ATOMIC_RESTORESTATE' was not declared in this scope
     ATOMIC_BLOCK( ATOMIC_RESTORESTATE ) {
                   ^~~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AskSinPP/Link.h:38:19: note: suggested alternative: '__ATOMIC_RELEASE'
     ATOMIC_BLOCK( ATOMIC_RESTORESTATE ) {
                   ^~~~~~~~~~~~~~~~~~~
                   __ATOMIC_RELEASE
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AskSinPP/Link.h:38:5: error: 'ATOMIC_BLOCK' was not declared in this scope
     ATOMIC_BLOCK( ATOMIC_RESTORESTATE ) {
     ^~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AskSinPP/Link.h:38:5: note: suggested alternative: 'ISR_BLOCK'
     ATOMIC_BLOCK( ATOMIC_RESTORESTATE ) {
     ^~~~~~~~~~~~
     ISR_BLOCK
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AskSinPP/Link.h: In member function 'as::Link* as::Link::ending() const':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AskSinPP/Link.h:47:19: error: 'ATOMIC_RESTORESTATE' was not declared in this scope
     ATOMIC_BLOCK( ATOMIC_RESTORESTATE ) {
                   ^~~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AskSinPP/Link.h:47:19: note: suggested alternative: '__ATOMIC_RELEASE'
     ATOMIC_BLOCK( ATOMIC_RESTORESTATE ) {
                   ^~~~~~~~~~~~~~~~~~~
                   __ATOMIC_RELEASE
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AskSinPP/Link.h:47:5: error: 'ATOMIC_BLOCK' was not declared in this scope
     ATOMIC_BLOCK( ATOMIC_RESTORESTATE ) {
     ^~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AskSinPP/Link.h:47:5: note: suggested alternative: 'ISR_BLOCK'
     ATOMIC_BLOCK( ATOMIC_RESTORESTATE ) {
     ^~~~~~~~~~~~
     ISR_BLOCK
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AskSinPP/Link.h: In member function 'as::Link* as::Link::unlink()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AskSinPP/Link.h:59:19: error: 'ATOMIC_RESTORESTATE' was not declared in this scope
     ATOMIC_BLOCK( ATOMIC_RESTORESTATE ) {
                   ^~~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AskSinPP/Link.h:59:19: note: suggested alternative: '__ATOMIC_RELEASE'
     ATOMIC_BLOCK( ATOMIC_RESTORESTATE ) {
                   ^~~~~~~~~~~~~~~~~~~
                   __ATOMIC_RELEASE
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AskSinPP/Link.h:59:5: error: 'ATOMIC_BLOCK' was not declared in this scope
     ATOMIC_BLOCK( ATOMIC_RESTORESTATE ) {
     ^~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AskSinPP/Link.h:59:5: note: suggested alternative: 'ISR_BLOCK'
     ATOMIC_BLOCK( ATOMIC_RESTORESTATE ) {
     ^~~~~~~~~~~~
     ISR_BLOCK
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AskSinPP/Link.h: In member function 'as::Link* as::Link::remove()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AskSinPP/Link.h:71:19: error: 'ATOMIC_RESTORESTATE' was not declared in this scope
     ATOMIC_BLOCK( ATOMIC_RESTORESTATE ) {
                   ^~~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AskSinPP/Link.h:71:19: note: suggested alternative: '__ATOMIC_RELEASE'
     ATOMIC_BLOCK( ATOMIC_RESTORESTATE ) {
                   ^~~~~~~~~~~~~~~~~~~
                   __ATOMIC_RELEASE
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AskSinPP/Link.h:71:5: error: 'ATOMIC_BLOCK' was not declared in this scope
     ATOMIC_BLOCK( ATOMIC_RESTORESTATE ) {
     ^~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AskSinPP/Link.h:71:5: note: suggested alternative: 'ISR_BLOCK'
     ATOMIC_BLOCK( ATOMIC_RESTORESTATE ) {
     ^~~~~~~~~~~~
     ISR_BLOCK
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AskSinPP/Link.h: In member function 'void as::Link::detach()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AskSinPP/Link.h:80:19: error: 'ATOMIC_RESTORESTATE' was not declared in this scope
     ATOMIC_BLOCK( ATOMIC_RESTORESTATE ) {
                   ^~~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AskSinPP/Link.h:80:19: note: suggested alternative: '__ATOMIC_RELEASE'
     ATOMIC_BLOCK( ATOMIC_RESTORESTATE ) {
                   ^~~~~~~~~~~~~~~~~~~
                   __ATOMIC_RELEASE
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AskSinPP/Link.h:80:5: error: 'ATOMIC_BLOCK' was not declared in this scope
     ATOMIC_BLOCK( ATOMIC_RESTORESTATE ) {
     ^~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AskSinPP/Link.h:80:5: note: suggested alternative: 'ISR_BLOCK'
     ATOMIC_BLOCK( ATOMIC_RESTORESTATE ) {
     ^~~~~~~~~~~~
     ISR_BLOCK
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AskSinPP/Link.h: In member function 'as::Link* as::Link::search(const as::Link*) const':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AskSinPP/Link.h:88:19: error: 'ATOMIC_RESTORESTATE' was not declared in this scope
     ATOMIC_BLOCK( ATOMIC_RESTORESTATE ) {
                   ^~~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-t

examples/FreqTest

Result: FAIL

WARNING: library AskSinPP claims to run on avr, STM32F1 architecture(s) and may be incompatible with your current board which runs on megaavr architecture(s).
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AskSinPP/AskSinPP.h:51:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AskSinPP/examples/FreqTest/FreqTest.ino:20:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AskSinPP/Storage.h: In member function 'uint8_t as::InternalEprom::getByte(uint16_t)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AskSinPP/Storage.h:112:5: error: 'eeprom_read_block' was not declared in this scope
     eeprom_read_block(&b,(void*)(uintptr_t)addr,1);
     ^~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AskSinPP/Storage.h:112:5: note: suggested alternative: 'pgm_read_float'
     eeprom_read_block(&b,(void*)(uintptr_t)addr,1);
     ^~~~~~~~~~~~~~~~~
     pgm_read_float
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AskSinPP/Storage.h: In member function 'bool as::InternalEprom::setByte(uint16_t, uint8_t)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AskSinPP/Storage.h:118:5: error: 'eeprom_write_block' was not declared in this scope
     eeprom_write_block(&b,(void*)(uintptr_t)addr,1);
     ^~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AskSinPP/Storage.h: In member function 'bool as::InternalEprom::setData(uint16_t, uint8_t*, uint16_t)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AskSinPP/Storage.h:123:5: error: 'eeprom_write_block' was not declared in this scope
     eeprom_write_block(buf,(void*)(uintptr_t)addr,size);
     ^~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AskSinPP/Storage.h: In member function 'bool as::InternalEprom::getData(uint16_t, uint8_t*, uint16_t)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AskSinPP/Storage.h:128:5: error: 'eeprom_read_block' was not declared in this scope
     eeprom_read_block(buf,(const void*)(uintptr_t)addr,size);
     ^~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AskSinPP/Storage.h:128:5: note: suggested alternative: 'pgm_read_float'
     eeprom_read_block(buf,(const void*)(uintptr_t)addr,size);
     ^~~~~~~~~~~~~~~~~
     pgm_read_float
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AskSinPP/Alarm.h:9:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AskSinPP/Pins.h:6,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AskSinPP/AskSinPP.h:52,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AskSinPP/examples/FreqTest/FreqTest.ino:20:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AskSinPP/Link.h: In member function 'as::Link* as::Link::select() const':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AskSinPP/Link.h:23:19: error: 'ATOMIC_RESTORESTATE' was not declared in this scope
     ATOMIC_BLOCK( ATOMIC_RESTORESTATE ) {
                   ^~~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AskSinPP/Link.h:23:19: note: suggested alternative: '__ATOMIC_RELEASE'
     ATOMIC_BLOCK( ATOMIC_RESTORESTATE ) {
                   ^~~~~~~~~~~~~~~~~~~
                   __ATOMIC_RELEASE
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AskSinPP/Link.h:23:5: error: 'ATOMIC_BLOCK' was not declared in this scope
     ATOMIC_BLOCK( ATOMIC_RESTORESTATE ) {
     ^~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AskSinPP/Link.h:23:5: note: suggested alternative: 'ISR_BLOCK'
     ATOMIC_BLOCK( ATOMIC_RESTORESTATE ) {
     ^~~~~~~~~~~~
     ISR_BLOCK
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AskSinPP/Link.h: In member function 'void as::Link::select(as::Link*)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AskSinPP/Link.h:31:19: error: 'ATOMIC_RESTORESTATE' was not declared in this scope
     ATOMIC_BLOCK( ATOMIC_RESTORESTATE ) {
                   ^~~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AskSinPP/Link.h:31:19: note: suggested alternative: '__ATOMIC_RELEASE'
     ATOMIC_BLOCK( ATOMIC_RESTORESTATE ) {
                   ^~~~~~~~~~~~~~~~~~~
                   __ATOMIC_RELEASE
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AskSinPP/Link.h:31:5: error: 'ATOMIC_BLOCK' was not declared in this scope
     ATOMIC_BLOCK( ATOMIC_RESTORESTATE ) {
     ^~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AskSinPP/Link.h:31:5: note: suggested alternative: 'ISR_BLOCK'
     ATOMIC_BLOCK( ATOMIC_RESTORESTATE ) {
     ^~~~~~~~~~~~
     ISR_BLOCK
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AskSinPP/Link.h: In member function 'void as::Link::append(as::Link&)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AskSinPP/Link.h:38:19: error: 'ATOMIC_RESTORESTATE' was not declared in this scope
     ATOMIC_BLOCK( ATOMIC_RESTORESTATE ) {
                   ^~~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AskSinPP/Link.h:38:19: note: suggested alternative: '__ATOMIC_RELEASE'
     ATOMIC_BLOCK( ATOMIC_RESTORESTATE ) {
                   ^~~~~~~~~~~~~~~~~~~
                   __ATOMIC_RELEASE
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AskSinPP/Link.h:38:5: error: 'ATOMIC_BLOCK' was not declared in this scope
     ATOMIC_BLOCK( ATOMIC_RESTORESTATE ) {
     ^~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AskSinPP/Link.h:38:5: note: suggested alternative: 'ISR_BLOCK'
     ATOMIC_BLOCK( ATOMIC_RESTORESTATE ) {
     ^~~~~~~~~~~~
     ISR_BLOCK
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AskSinPP/Link.h: In member function 'as::Link* as::Link::ending() const':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AskSinPP/Link.h:47:19: error: 'ATOMIC_RESTORESTATE' was not declared in this scope
     ATOMIC_BLOCK( ATOMIC_RESTORESTATE ) {
                   ^~~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AskSinPP/Link.h:47:19: note: suggested alternative: '__ATOMIC_RELEASE'
     ATOMIC_BLOCK( ATOMIC_RESTORESTATE ) {
                   ^~~~~~~~~~~~~~~~~~~
                   __ATOMIC_RELEASE
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AskSinPP/Link.h:47:5: error: 'ATOMIC_BLOCK' was not declared in this scope
     ATOMIC_BLOCK( ATOMIC_RESTORESTATE ) {
     ^~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AskSinPP/Link.h:47:5: note: suggested alternative: 'ISR_BLOCK'
     ATOMIC_BLOCK( ATOMIC_RESTORESTATE ) {
     ^~~~~~~~~~~~
     ISR_BLOCK
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AskSinPP/Link.h: In member function 'as::Link* as::Link::unlink()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AskSinPP/Link.h:59:19: error: 'ATOMIC_RESTORESTATE' was not declared in this scope
     ATOMIC_BLOCK( ATOMIC_RESTORESTATE ) {
                   ^~~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AskSinPP/Link.h:59:19: note: suggested alternative: '__ATOMIC_RELEASE'
     ATOMIC_BLOCK( ATOMIC_RESTORESTATE ) {
                   ^~~~~~~~~~~~~~~~~~~
                   __ATOMIC_RELEASE
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AskSinPP/Link.h:59:5: error: 'ATOMIC_BLOCK' was not declared in this scope
     ATOMIC_BLOCK( ATOMIC_RESTORESTATE ) {
     ^~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AskSinPP/Link.h:59:5: note: suggested alternative: 'ISR_BLOCK'
     ATOMIC_BLOCK( ATOMIC_RESTORESTATE ) {
     ^~~~~~~~~~~~
     ISR_BLOCK
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AskSinPP/Link.h: In member function 'as::Link* as::Link::remove()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AskSinPP/Link.h:71:19: error: 'ATOMIC_RESTORESTATE' was not declared in this scope
     ATOMIC_BLOCK( ATOMIC_RESTORESTATE ) {
                   ^~~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AskSinPP/Link.h:71:19: note: suggested alternative: '__ATOMIC_RELEASE'
     ATOMIC_BLOCK( ATOMIC_RESTORESTATE ) {
                   ^~~~~~~~~~~~~~~~~~~
                   __ATOMIC_RELEASE
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AskSinPP/Link.h:71:5: error: 'ATOMIC_BLOCK' was not declared in this scope
     ATOMIC_BLOCK( ATOMIC_RESTORESTATE ) {
     ^~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AskSinPP/Link.h:71:5: note: suggested alternative: 'ISR_BLOCK'
     ATOMIC_BLOCK( ATOMIC_RESTORESTATE ) {
     ^~~~~~~~~~~~
     ISR_BLOCK
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AskSinPP/Link.h: In member function 'void as::Link::detach()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AskSinPP/Link.h:80:19: error: 'ATOMIC_RESTORESTATE' was not declared in this scope
     ATOMIC_BLOCK( ATOMIC_RESTORESTATE ) {
                   ^~~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AskSinPP/Link.h:80:19: note: suggested alternative: '__ATOMIC_RELEASE'
     ATOMIC_BLOCK( ATOMIC_RESTORESTATE ) {
                   ^~~~~~~~~~~~~~~~~~~
                   __ATOMIC_RELEASE
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AskSinPP/Link.h:80:5: error: 'ATOMIC_BLOCK' was not declared in this scope
     ATOMIC_BLOCK( ATOMIC_RESTORESTATE ) {
     ^~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AskSinPP/Link.h:80:5: note: suggested alternative: 'ISR_BLOCK'
     ATOMIC_BLOCK( ATOMIC_RESTORESTATE ) {
     ^~~~~~~~~~~~
     ISR_BLOCK
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AskSinPP/Link.h: In member function 'as::Link* as::Link::search(const as::Link*) const':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AskSinPP/Link.h:88:19: error: 'ATOMIC_RESTORESTATE' was not declared in this sc

examples/HM-DW-WM

Result: FAIL

WARNING: library AskSinPP claims to run on avr, STM32F1 architecture(s) and may be incompatible with your current board which runs on megaavr architecture(s).
WARNING: library LowPower_LowPowerLab claims to run on avr, samd architecture(s) and may be incompatible with your current board which runs on megaavr architecture(s).
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AskSinPP/examples/HM-DW-WM/HM-DW-WM.ino:10:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EnableInterrupt/EnableInterrupt.h:1279:2: error: #error Unsupported Arduino platform
 #error Unsupported Arduino platform
  ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EnableInterrupt/EnableInterrupt.h:1450:2: error: #error Unsupported Arduino platform
 #error Unsupported Arduino platform
  ^~~~~
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AskSinPP/examples/HM-DW-WM/HM-DW-WM.ino:12:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/LowPower_LowPowerLab/LowPower.h:148:6: error: #error "Please ensure chosen MCU is either 88, 168, 168P, 328P, 32U4, 2560 or 256RFR2."
     #error "Please ensure chosen MCU is either 88, 168, 168P, 328P, 32U4, 2560 or 256RFR2."
      ^~~~~
Multiple libraries were found for "LowPower.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/LowPower_LowPowerLab
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Low-Power

examples/HM-ES-TX-WM

Result: FAIL

WARNING: library AskSinPP claims to run on avr, STM32F1 architecture(s) and may be incompatible with your current board which runs on megaavr architecture(s).
WARNING: library LowPower_LowPowerLab claims to run on avr, samd architecture(s) and may be incompatible with your current board which runs on megaavr architecture(s).
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AskSinPP/examples/HM-ES-TX-WM/HM-ES-TX-WM.ino:10:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EnableInterrupt/EnableInterrupt.h:1279:2: error: #error Unsupported Arduino platform
 #error Unsupported Arduino platform
  ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EnableInterrupt/EnableInterrupt.h:1450:2: error: #error Unsupported Arduino platform
 #error Unsupported Arduino platform
  ^~~~~
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AskSinPP/examples/HM-ES-TX-WM/HM-ES-TX-WM.ino:12:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/LowPower_LowPowerLab/LowPower.h:148:6: error: #error "Please ensure chosen MCU is either 88, 168, 168P, 328P, 32U4, 2560 or 256RFR2."
     #error "Please ensure chosen MCU is either 88, 168, 168P, 328P, 32U4, 2560 or 256RFR2."
      ^~~~~
Multiple libraries were found for "LowPower.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/LowPower_LowPowerLab
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Low-Power

examples/HM-LC-Bl1-FM

Result: FAIL

WARNING: library AskSinPP claims to run on avr, STM32F1 architecture(s) and may be incompatible with your current board which runs on megaavr architecture(s).
WARNING: library LowPower_LowPowerLab claims to run on avr, samd architecture(s) and may be incompatible with your current board which runs on megaavr architecture(s).
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AskSinPP/examples/HM-LC-Bl1-FM/HM-LC-Bl1-FM.ino:10:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EnableInterrupt/EnableInterrupt.h:1279:2: error: #error Unsupported Arduino platform
 #error Unsupported Arduino platform
  ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EnableInterrupt/EnableInterrupt.h:1450:2: error: #error Unsupported Arduino platform
 #error Unsupported Arduino platform
  ^~~~~
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AskSinPP/examples/HM-LC-Bl1-FM/HM-LC-Bl1-FM.ino:12:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/LowPower_LowPowerLab/LowPower.h:148:6: error: #error "Please ensure chosen MCU is either 88, 168, 168P, 328P, 32U4, 2560 or 256RFR2."
     #error "Please ensure chosen MCU is either 88, 168, 168P, 328P, 32U4, 2560 or 256RFR2."
      ^~~~~
Multiple libraries were found for "LowPower.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/LowPower_LowPowerLab
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Low-Power

examples/HM-LC-DW-WM

Result: FAIL

WARNING: library AskSinPP claims to run on avr, STM32F1 architecture(s) and may be incompatible with your current board which runs on megaavr architecture(s).
WARNING: library LowPower_LowPowerLab claims to run on avr, samd architecture(s) and may be incompatible with your current board which runs on megaavr architecture(s).
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AskSinPP/examples/HM-LC-DW-WM/HM-LC-DW-WM.ino:10:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EnableInterrupt/EnableInterrupt.h:1279:2: error: #error Unsupported Arduino platform
 #error Unsupported Arduino platform
  ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EnableInterrupt/EnableInterrupt.h:1450:2: error: #error Unsupported Arduino platform
 #error Unsupported Arduino platform
  ^~~~~
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AskSinPP/examples/HM-LC-DW-WM/HM-LC-DW-WM.ino:12:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/LowPower_LowPowerLab/LowPower.h:148:6: error: #error "Please ensure chosen MCU is either 88, 168, 168P, 328P, 32U4, 2560 or 256RFR2."
     #error "Please ensure chosen MCU is either 88, 168, 168P, 328P, 32U4, 2560 or 256RFR2."
      ^~~~~
Multiple libraries were found for "LowPower.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/LowPower_LowPowerLab
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Low-Power

examples/HM-LC-Dim1PWM-CV

Result: FAIL

WARNING: library AskSinPP claims to run on avr, STM32F1 architecture(s) and may be incompatible with your current board which runs on megaavr architecture(s).
WARNING: library LowPower_LowPowerLab claims to run on avr, samd architecture(s) and may be incompatible with your current board which runs on megaavr architecture(s).
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AskSinPP/examples/HM-LC-Dim1PWM-CV/HM-LC-Dim1PWM-CV.ino:10:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EnableInterrupt/EnableInterrupt.h:1279:2: error: #error Unsupported Arduino platform
 #error Unsupported Arduino platform
  ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EnableInterrupt/EnableInterrupt.h:1450:2: error: #error Unsupported Arduino platform
 #error Unsupported Arduino platform
  ^~~~~
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AskSinPP/examples/HM-LC-Dim1PWM-CV/HM-LC-Dim1PWM-CV.ino:12:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/LowPower_LowPowerLab/LowPower.h:148:6: error: #error "Please ensure chosen MCU is either 88, 168, 168P, 328P, 32U4, 2560 or 256RFR2."
     #error "Please ensure chosen MCU is either 88, 168, 168P, 328P, 32U4, 2560 or 256RFR2."
      ^~~~~
Multiple libraries were found for "LowPower.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/LowPower_LowPowerLab
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Low-Power

examples/HM-LC-Dim1TPBU-FM

Result: FAIL

WARNING: library AskSinPP claims to run on avr, STM32F1 architecture(s) and may be incompatible with your current board which runs on megaavr architecture(s).
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AskSinPP/examples/HM-LC-Dim1TPBU-FM/HM-LC-Dim1TPBU-FM.ino:28:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EnableInterrupt/EnableInterrupt.h:1279:2: error: #error Unsupported Arduino platform
 #error Unsupported Arduino platform
  ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EnableInterrupt/EnableInterrupt.h:1450:2: error: #error Unsupported Arduino platform
 #error Unsupported Arduino platform
  ^~~~~

examples/HM-LC-SW1-BA-PCB

Result: FAIL

WARNING: library AskSinPP claims to run on avr, STM32F1 architecture(s) and may be incompatible with your current board which runs on megaavr architecture(s).
WARNING: library LowPower_LowPowerLab claims to run on avr, samd architecture(s) and may be incompatible with your current board which runs on megaavr architecture(s).
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AskSinPP/examples/HM-LC-SW1-BA-PCB/HM-LC-SW1-BA-PCB.ino:11:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EnableInterrupt/EnableInterrupt.h:1279:2: error: #error Unsupported Arduino platform
 #error Unsupported Arduino platform
  ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EnableInterrupt/EnableInterrupt.h:1450:2: error: #error Unsupported Arduino platform
 #error Unsupported Arduino platform
  ^~~~~
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AskSinPP/examples/HM-LC-SW1-BA-PCB/HM-LC-SW1-BA-PCB.ino:13:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/LowPower_LowPowerLab/LowPower.h:148:6: error: #error "Please ensure chosen MCU is either 88, 168, 168P, 328P, 32U4, 2560 or 256RFR2."
     #error "Please ensure chosen MCU is either 88, 168, 168P, 328P, 32U4, 2560 or 256RFR2."
      ^~~~~
Multiple libraries were found for "LowPower.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/LowPower_LowPowerLab
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Low-Power

examples/HM-LC-SWX-SM

Result: FAIL

WARNING: library AskSinPP claims to run on avr, STM32F1 architecture(s) and may be incompatible with your current board which runs on megaavr architecture(s).
WARNING: library LowPower_LowPowerLab claims to run on avr, samd architecture(s) and may be incompatible with your current board which runs on megaavr architecture(s).
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AskSinPP/examples/HM-LC-SWX-SM/HM-LC-SWX-SM.ino:23:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EnableInterrupt/EnableInterrupt.h:1279:2: error: #error Unsupported Arduino platform
 #error Unsupported Arduino platform
  ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EnableInterrupt/EnableInterrupt.h:1450:2: error: #error Unsupported Arduino platform
 #error Unsupported Arduino platform
  ^~~~~
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AskSinPP/examples/HM-LC-SWX-SM/HM-LC-SWX-SM.ino:25:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/LowPower_LowPowerLab/LowPower.h:148:6: error: #error "Please ensure chosen MCU is either 88, 168, 168P, 328P, 32U4, 2560 or 256RFR2."
     #error "Please ensure chosen MCU is either 88, 168, 168P, 328P, 32U4, 2560 or 256RFR2."
      ^~~~~
Multiple libraries were found for "LowPower.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/LowPower_LowPowerLab
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Low-Power

examples/HM-RC-4

Result: FAIL

WARNING: library AskSinPP claims to run on avr, STM32F1 architecture(s) and may be incompatible with your current board which runs on megaavr architecture(s).
WARNING: library LowPower_LowPowerLab claims to run on avr, samd architecture(s) and may be incompatible with your current board which runs on megaavr architecture(s).
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AskSinPP/examples/HM-RC-4/HM-RC-4.ino:10:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EnableInterrupt/EnableInterrupt.h:1279:2: error: #error Unsupported Arduino platform
 #error Unsupported Arduino platform
  ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EnableInterrupt/EnableInterrupt.h:1450:2: error: #error Unsupported Arduino platform
 #error Unsupported Arduino platform
  ^~~~~
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AskSinPP/examples/HM-RC-4/HM-RC-4.ino:13:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/LowPower_LowPowerLab/LowPower.h:148:6: error: #error "Please ensure chosen MCU is either 88, 168, 168P, 328P, 32U4, 2560 or 256RFR2."
     #error "Please ensure chosen MCU is either 88, 168, 168P, 328P, 32U4, 2560 or 256RFR2."
      ^~~~~
Multiple libraries were found for "LowPower.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/LowPower_LowPowerLab
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Low-Power

examples/HM-RC-8

Result: FAIL

WARNING: library AskSinPP claims to run on avr, STM32F1 architecture(s) and may be incompatible with your current board which runs on megaavr architecture(s).
WARNING: library LowPower_LowPowerLab claims to run on avr, samd architecture(s) and may be incompatible with your current board which runs on megaavr architecture(s).
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AskSinPP/examples/HM-RC-8/HM-RC-8.ino:10:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EnableInterrupt/EnableInterrupt.h:1279:2: error: #error Unsupported Arduino platform
 #error Unsupported Arduino platform
  ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EnableInterrupt/EnableInterrupt.h:1450:2: error: #error Unsupported Arduino platform
 #error Unsupported Arduino platform
  ^~~~~
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AskSinPP/examples/HM-RC-8/HM-RC-8.ino:12:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/LowPower_LowPowerLab/LowPower.h:148:6: error: #error "Please ensure chosen MCU is either 88, 168, 168P, 328P, 32U4, 2560 or 256RFR2."
     #error "Please ensure chosen MCU is either 88, 168, 168P, 328P, 32U4, 2560 or 256RFR2."
      ^~~~~
Multiple libraries were found for "LowPower.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/LowPower_LowPowerLab
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Low-Power

examples/HM-RC-P1

Result: FAIL

WARNING: library AskSinPP claims to run on avr, STM32F1 architecture(s) and may be incompatible with your current board which runs on megaavr architecture(s).
WARNING: library LowPower_LowPowerLab claims to run on avr, samd architecture(s) and may be incompatible with your current board which runs on megaavr architecture(s).
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AskSinPP/examples/HM-RC-P1/HM-RC-P1.ino:10:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EnableInterrupt/EnableInterrupt.h:1279:2: error: #error Unsupported Arduino platform
 #error Unsupported Arduino platform
  ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EnableInterrupt/EnableInterrupt.h:1450:2: error: #error Unsupported Arduino platform
 #error Unsupported Arduino platform
  ^~~~~
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AskSinPP/examples/HM-RC-P1/HM-RC-P1.ino:12:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/LowPower_LowPowerLab/LowPower.h:148:6: error: #error "Please ensure chosen MCU is either 88, 168, 168P, 328P, 32U4, 2560 or 256RFR2."
     #error "Please ensure chosen MCU is either 88, 168, 168P, 328P, 32U4, 2560 or 256RFR2."
      ^~~~~
Multiple libraries were found for "LowPower.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/LowPower_LowPowerLab
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Low-Power

examples/HM-SEC-MDIR

Result: FAIL

WARNING: library AskSinPP claims to run on avr, STM32F1 architecture(s) and may be incompatible with your current board which runs on megaavr architecture(s).
WARNING: library LowPower_LowPowerLab claims to run on avr, samd architecture(s) and may be incompatible with your current board which runs on megaavr architecture(s).
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AskSinPP/examples/HM-SEC-MDIR/HM-SEC-MDIR.ino:10:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EnableInterrupt/EnableInterrupt.h:1279:2: error: #error Unsupported Arduino platform
 #error Unsupported Arduino platform
  ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EnableInterrupt/EnableInterrupt.h:1450:2: error: #error Unsupported Arduino platform
 #error Unsupported Arduino platform
  ^~~~~
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AskSinPP/examples/HM-SEC-MDIR/HM-SEC-MDIR.ino:12:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/LowPower_LowPowerLab/LowPower.h:148:6: error: #error "Please ensure chosen MCU is either 88, 168, 168P, 328P, 32U4, 2560 or 256RFR2."
     #error "Please ensure chosen MCU is either 88, 168, 168P, 328P, 32U4, 2560 or 256RFR2."
      ^~~~~
Multiple libraries were found for "LowPower.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/LowPower_LowPowerLab
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Low-Power

examples/HM-SEC-RHS

Result: FAIL

WARNING: library AskSinPP claims to run on avr, STM32F1 architecture(s) and may be incompatible with your current board which runs on megaavr architecture(s).
WARNING: library LowPower_LowPowerLab claims to run on avr, samd architecture(s) and may be incompatible with your current board which runs on megaavr architecture(s).
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AskSinPP/examples/HM-SEC-RHS/HM-SEC-RHS.ino:34:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EnableInterrupt/EnableInterrupt.h:1279:2: error: #error Unsupported Arduino platform
 #error Unsupported Arduino platform
  ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EnableInterrupt/EnableInterrupt.h:1450:2: error: #error Unsupported Arduino platform
 #error Unsupported Arduino platform
  ^~~~~
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AskSinPP/examples/HM-SEC-RHS/HM-SEC-RHS.ino:36:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/LowPower_LowPowerLab/LowPower.h:148:6: error: #error "Please ensure chosen MCU is either 88, 168, 168P, 328P, 32U4, 2560 or 256RFR2."
     #error "Please ensure chosen MCU is either 88, 168, 168P, 328P, 32U4, 2560 or 256RFR2."
      ^~~~~
Multiple libraries were found for "LowPower.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/LowPower_LowPowerLab
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Low-Power

examples/HM-SEC-SD

Result: FAIL

WARNING: library AskSinPP claims to run on avr, STM32F1 architecture(s) and may be incompatible with your current board which runs on megaavr architecture(s).
WARNING: library LowPower_LowPowerLab claims to run on avr, samd architecture(s) and may be incompatible with your current board which runs on megaavr architecture(s).
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AskSinPP/examples/HM-SEC-SD/HM-SEC-SD.ino:11:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EnableInterrupt/EnableInterrupt.h:1279:2: error: #error Unsupported Arduino platform
 #error Unsupported Arduino platform
  ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EnableInterrupt/EnableInterrupt.h:1450:2: error: #error Unsupported Arduino platform
 #error Unsupported Arduino platform
  ^~~~~
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AskSinPP/examples/HM-SEC-SD/HM-SEC-SD.ino:13:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/LowPower_LowPowerLab/LowPower.h:148:6: error: #error "Please ensure chosen MCU is either 88, 168, 168P, 328P, 32U4, 2560 or 256RFR2."
     #error "Please ensure chosen MCU is either 88, 168, 168P, 328P, 32U4, 2560 or 256RFR2."
      ^~~~~
Multiple libraries were found for "LowPower.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/LowPower_LowPowerLab
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Low-Power

examples/HM-SEC-WDS

Result: FAIL

WARNING: library AskSinPP claims to run on avr, STM32F1 architecture(s) and may be incompatible with your current board which runs on megaavr architecture(s).
WARNING: library LowPower_LowPowerLab claims to run on avr, samd architecture(s) and may be incompatible with your current board which runs on megaavr architecture(s).
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AskSinPP/examples/HM-SEC-WDS/HM-SEC-WDS.ino:10:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EnableInterrupt/EnableInterrupt.h:1279:2: error: #error Unsupported Arduino platform
 #error Unsupported Arduino platform
  ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EnableInterrupt/EnableInterrupt.h:1450:2: error: #error Unsupported Arduino platform
 #error Unsupported Arduino platform
  ^~~~~
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AskSinPP/examples/HM-SEC-WDS/HM-SEC-WDS.ino:12:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/LowPower_LowPowerLab/LowPower.h:148:6: error: #error "Please ensure chosen MCU is either 88, 168, 168P, 328P, 32U4, 2560 or 256RFR2."
     #error "Please ensure chosen MCU is either 88, 168, 168P, 328P, 32U4, 2560 or 256RFR2."
      ^~~~~
Multiple libraries were found for "LowPower.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/LowPower_LowPowerLab
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Low-Power

examples/HM-SEN-MDIR-WM55

Result: FAIL

WARNING: library AskSinPP claims to run on avr, STM32F1 architecture(s) and may be incompatible with your current board which runs on megaavr architecture(s).
WARNING: library LowPower_LowPowerLab claims to run on avr, samd architecture(s) and may be incompatible with your current board which runs on megaavr architecture(s).
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AskSinPP/examples/HM-SEN-MDIR-WM55/HM-SEN-MDIR-WM55.ino:12:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EnableInterrupt/EnableInterrupt.h:1279:2: error: #error Unsupported Arduino platform
 #error Unsupported Arduino platform
  ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EnableInterrupt/EnableInterrupt.h:1450:2: error: #error Unsupported Arduino platform
 #error Unsupported Arduino platform
  ^~~~~
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AskSinPP/examples/HM-SEN-MDIR-WM55/HM-SEN-MDIR-WM55.ino:14:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/LowPower_LowPowerLab/LowPower.h:148:6: error: #error "Please ensure chosen MCU is either 88, 168, 168P, 328P, 32U4, 2560 or 256RFR2."
     #error "Please ensure chosen MCU is either 88, 168, 168P, 328P, 32U4, 2560 or 256RFR2."
      ^~~~~
Multiple libraries were found for "LowPower.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/LowPower_LowPowerLab
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Low-Power

examples/HM-WDS10-TH-O

Result: FAIL

In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AskSinPP/examples/HM-WDS10-TH-O/HM-WDS10-TH-O.ino:11:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EnableInterrupt/EnableInterrupt.h:1279:2: error: #error Unsupported Arduino platform
 #error Unsupported Arduino platform
  ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EnableInterrupt/EnableInterrupt.h:1450:2: error: #error Unsupported Arduino platform
 #error Unsupported Arduino platform
  ^~~~~
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AskSinPP/examples/HM-WDS10-TH-O/HM-WDS10-TH-O.ino:13:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/LowPower_LowPowerLab/LowPower.h:148:6: error: #error "Please ensure chosen MCU is either 88, 168, 168P, 328P, 32U4, 2560 or 256RFR2."
     #error "Please ensure chosen MCU is either 88, 168, 168P, 328P, 32U4, 2560 or 256RFR2."
      ^~~~~
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AskSinPP/examples/HM-WDS10-TH-O/HM-WDS10-TH-O.ino:18:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AskSinPP/sensors/Sht10.h:10:10: fatal error: Sensirion.h: No such file or directory
 #include <Sensirion.h>
          ^~~~~~~~~~~~~
compilation terminated.
Multiple libraries were found for "LowPower.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/LowPower_LowPowerLab
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Low-Power

examples/HM-WDS100-C6-O-2

Result: FAIL

WARNING: library AskSinPP claims to run on avr, STM32F1 architecture(s) and may be incompatible with your current board which runs on megaavr architecture(s).
WARNING: library LowPower_LowPowerLab claims to run on avr, samd architecture(s) and may be incompatible with your current board which runs on megaavr architecture(s).
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AskSinPP/examples/HM-WDS100-C6-O-2/HM-WDS100-C6-O-2.ino:10:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EnableInterrupt/EnableInterrupt.h:1279:2: error: #error Unsupported Arduino platform
 #error Unsupported Arduino platform
  ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EnableInterrupt/EnableInterrupt.h:1450:2: error: #error Unsupported Arduino platform
 #error Unsupported Arduino platform
  ^~~~~
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AskSinPP/examples/HM-WDS100-C6-O-2/HM-WDS100-C6-O-2.ino:12:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/LowPower_LowPowerLab/LowPower.h:148:6: error: #error "Please ensure chosen MCU is either 88, 168, 168P, 328P, 32U4, 2560 or 256RFR2."
     #error "Please ensure chosen MCU is either 88, 168, 168P, 328P, 32U4, 2560 or 256RFR2."
      ^~~~~
Multiple libraries were found for "LowPower.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/LowPower_LowPowerLab
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Low-Power

examples/HM-WDS40-TH-I

Result: FAIL

WARNING: library AskSinPP claims to run on avr, STM32F1 architecture(s) and may be incompatible with your current board which runs on megaavr architecture(s).
WARNING: library LowPower_LowPowerLab claims to run on avr, samd architecture(s) and may be incompatible with your current board which runs on megaavr architecture(s).
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AskSinPP/examples/HM-WDS40-TH-I/HM-WDS40-TH-I.ino:11:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EnableInterrupt/EnableInterrupt.h:1279:2: error: #error Unsupported Arduino platform
 #error Unsupported Arduino platform
  ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EnableInterrupt/EnableInterrupt.h:1450:2: error: #error Unsupported Arduino platform
 #error Unsupported Arduino platform
  ^~~~~
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AskSinPP/examples/HM-WDS40-TH-I/HM-WDS40-TH-I.ino:13:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/LowPower_LowPowerLab/LowPower.h:148:6: error: #error "Please ensure chosen MCU is either 88, 168, 168P, 328P, 32U4, 2560 or 256RFR2."
     #error "Please ensure chosen MCU is either 88, 168, 168P, 328P, 32U4, 2560 or 256RFR2."
      ^~~~~
Multiple libraries were found for "LowPower.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/LowPower_LowPowerLab
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Low-Power

examples/custom

Result: FAIL

examples/max

Result: FAIL

examples/stm32

Result: FAIL

examples/tests

Result: FAIL

arduino:samd:mkrwifi1010 @ 1.8.12

Inclusion

Result: FAIL

WARNING: library AskSinPP claims to run on avr, STM32F1 architecture(s) and may be incompatible with your current board which runs on samd architecture(s).
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AskSinPP/AskSinPP.h:51:0,
                 from /tmp/arduino-testlib1768633516/test/test.ino:1:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AskSinPP/Storage.h: In member function 'uint16_t as::InternalEprom::size()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AskSinPP/Storage.h:93:12: error: 'E2END' was not declared in this scope
     return E2END + 1; // last EEPROM address + 1
            ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AskSinPP/Storage.h: In member function 'uint8_t as::InternalEprom::getByte(uint16_t)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AskSinPP/Storage.h:112:5: error: 'eeprom_read_block' was not declared in this scope
     eeprom_read_block(&b,(void*)(uintptr_t)addr,1);
     ^~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AskSinPP/Storage.h:112:5: note: suggested alternative: 'pgm_read_float'
     eeprom_read_block(&b,(void*)(uintptr_t)addr,1);
     ^~~~~~~~~~~~~~~~~
     pgm_read_float
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AskSinPP/Storage.h: In member function 'bool as::InternalEprom::setByte(uint16_t, uint8_t)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AskSinPP/Storage.h:118:5: error: 'eeprom_write_block' was not declared in this scope
     eeprom_write_block(&b,(void*)(uintptr_t)addr,1);
     ^~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AskSinPP/Storage.h: In member function 'bool as::InternalEprom::setData(uint16_t, uint8_t*, uint16_t)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AskSinPP/Storage.h:123:5: error: 'eeprom_write_block' was not declared in this scope
     eeprom_write_block(buf,(void*)(uintptr_t)addr,size);
     ^~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AskSinPP/Storage.h: In member function 'bool as::InternalEprom::getData(uint16_t, uint8_t*, uint16_t)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AskSinPP/Storage.h:128:5: error: 'eeprom_read_block' was not declared in this scope
     eeprom_read_block(buf,(const void*)(uintptr_t)addr,size);
     ^~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AskSinPP/Storage.h:128:5: note: suggested alternative: 'pgm_read_float'
     eeprom_read_block(buf,(const void*)(uintptr_t)addr,size);
     ^~~~~~~~~~~~~~~~~
     pgm_read_float
In file included from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/tools/CMSIS-Atmel/1.2.0/CMSIS/Device/ATMEL/samd21/include/samd21.h:69:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/tools/CMSIS-Atmel/1.2.0/CMSIS/Device/ATMEL/samd.h:105,
                 from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/cores/arduino/Arduino.h:38,
                 from /tmp/arduino-sketch-9C708279C12C8E7A918ECFBA9803C6AD/sketch/test.ino.cpp:1:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AskSinPP/AlarmClock.h: At global scope:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/tools/CMSIS-Atmel/1.2.0/CMSIS/Device/ATMEL/samd21/include/samd21g18a.h:487:27: error: expected identifier before '(' token
 #define RTC               ((Rtc      *)0x40001400UL) /**< \brief (RTC) APB Base Address */
                           ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AskSinPP/AlarmClock.h:185:7: note: in expansion of macro 'RTC'
 class RTC : public AlarmClock {
       ^~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/tools/CMSIS-Atmel/1.2.0/CMSIS/Device/ATMEL/samd21/include/samd21g18a.h:487:38: error: expected ')' before '*' token
 #define RTC               ((Rtc      *)0x40001400UL) /**< \brief (RTC) APB Base Address */
                                      ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AskSinPP/AlarmClock.h:185:7: note: in expansion of macro 'RTC'
 class RTC : public AlarmClock {
       ^~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/tools/CMSIS-Atmel/1.2.0/CMSIS/Device/ATMEL/samd21/include/samd21g18a.h:487:38: error: expected ')' before '*' token
 #define RTC               ((Rtc      *)0x40001400UL) /**< \brief (RTC) APB Base Address */
                                      ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AskSinPP/AlarmClock.h:185:7: note: in expansion of macro 'RTC'
 class RTC : public AlarmClock {
       ^~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/tools/CMSIS-Atmel/1.2.0/CMSIS/Device/ATMEL/samd21/include/samd21g18a.h:487:38: error: expected ')' before '*' token
 #define RTC               ((Rtc      *)0x40001400UL) /**< \brief (RTC) APB Base Address */
                                      ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AskSinPP/AlarmClock.h:283:8: note: in expansion of macro 'RTC'
 extern RTC rtc;
        ^~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/tools/CMSIS-Atmel/1.2.0/CMSIS/Device/ATMEL/samd21/include/samd21g18a.h:487:38: error: expected ')' before '*' token
 #define RTC               ((Rtc      *)0x40001400UL) /**< \brief (RTC) APB Base Address */
                                      ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AskSinPP/AlarmClock.h:283:8: note: in expansion of macro 'RTC'
 extern RTC rtc;
        ^~~
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AskSinPP/Activity.h:11:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AskSinPP/AskSinPP.h:54,
                 from /tmp/arduino-testlib1768633516/test/test.ino:1:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AskSinPP/Radio.h: In member function 'void as::CC1101<SPIType>::setIdle()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AskSinPP/Radio.h:404:7: error: there are no arguments to '_delay_us' that depend on a template parameter, so a declaration of '_delay_us' must be available [-fpermissive]
       _delay_us(10);
       ^~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AskSinPP/Radio.h:404:7: note: (if you use '-fpermissive', G++ will accept your code, but allowing the use of an undeclared name is deprecated)
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AskSinPP/Radio.h: In member function 'uint8_t as::CC1101<SPIType>::reset()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AskSinPP/Radio.h:446:5: error: there are no arguments to '_delay_us' that depend on a template parameter, so a declaration of '_delay_us' must be available [-fpermissive]
     _delay_us(50);
     ^~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AskSinPP/Radio.h: In member function 'bool as::CC1101<SPIType>::init()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AskSinPP/Radio.h:626:5: error: there are no arguments to '_delay_ms' that depend on a template parameter, so a declaration of '_delay_ms' must be available [-fpermissive]
     _delay_ms(23);
     ^~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AskSinPP/Radio.h: In member function 'bool as::CC1101<SPIType>::initReg(uint8_t, uint8_t, uint8_t)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AskSinPP/Radio.h:647:9: error: there are no arguments to '_delay_ms' that depend on a template parameter, so a declaration of '_delay_ms' must be available [-fpermissive]
         _delay_ms(1);
         ^~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AskSinPP/Radio.h: In member function 'uint8_t as::CC1101<SPIType>::sndData(uint8_t*, uint8_t, uint8_t)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AskSinPP/Radio.h:694:7: error: there are no arguments to '_delay_us' that depend on a template parameter, so a declaration of '_delay_us' must be available [-fpermissive]
       _delay_us(100);
       ^~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AskSinPP/Radio.h:708:5: error: there are no arguments to '_delay_ms' that depend on a template parameter, so a declaration of '_delay_ms' must be available [-fpermissive]
     _delay_ms(10);
     ^~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AskSinPP/Radio.h:710:7: error: there are no arguments to '_delay_ms' that depend on a template parameter, so a declaration of '_delay_ms' must be available [-fpermissive]
       _delay_ms(350);    // according to ELV, devices get activated every 300ms, so send burst for 360ms
       ^~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AskSinPP/Radio.h:719:7: error: there are no arguments to '_delay_us' that depend on a template parameter, so a declaration of '_delay_us' must be available [-fpermissive]
       _delay_us(100);
       ^~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AskSinPP/Radio.h: In member function 'uint8_t as::CC1101<SPIType>::rcvData(uint8_t*, uint8_t)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AskSinPP/Radio.h:756:5: error: there are no arguments to '_delay_us' that depend on a template parameter, so a declaration of '_delay_us' must be available [-fpermissive]
     _delay_us(190);
     ^~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AskSinPP/Radio.h: In member function 'void as::Radio<SPIType, GDO0, SENDDELAY, HWRADIO>::MinSendTimeout::waitTimeout()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AskSinPP/Radio.h:782:11: error: there are no arguments to '_delay_ms' that depend on a template parameter, so a declaration of '_delay_ms' must be available [-fpermissive]
           _delay_ms(1);
           ^~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AskSinPP/Radio.

examples/FreqTest

Result: FAIL

WARNING: library AskSinPP claims to run on avr, STM32F1 architecture(s) and may be incompatible with your current board which runs on samd architecture(s).
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AskSinPP/AskSinPP.h:51:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AskSinPP/examples/FreqTest/FreqTest.ino:20:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AskSinPP/Storage.h: In member function 'uint16_t as::InternalEprom::size()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AskSinPP/Storage.h:93:12: error: 'E2END' was not declared in this scope
     return E2END + 1; // last EEPROM address + 1
            ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AskSinPP/Storage.h: In member function 'uint8_t as::InternalEprom::getByte(uint16_t)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AskSinPP/Storage.h:112:5: error: 'eeprom_read_block' was not declared in this scope
     eeprom_read_block(&b,(void*)(uintptr_t)addr,1);
     ^~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AskSinPP/Storage.h:112:5: note: suggested alternative: 'pgm_read_float'
     eeprom_read_block(&b,(void*)(uintptr_t)addr,1);
     ^~~~~~~~~~~~~~~~~
     pgm_read_float
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AskSinPP/Storage.h: In member function 'bool as::InternalEprom::setByte(uint16_t, uint8_t)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AskSinPP/Storage.h:118:5: error: 'eeprom_write_block' was not declared in this scope
     eeprom_write_block(&b,(void*)(uintptr_t)addr,1);
     ^~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AskSinPP/Storage.h: In member function 'bool as::InternalEprom::setData(uint16_t, uint8_t*, uint16_t)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AskSinPP/Storage.h:123:5: error: 'eeprom_write_block' was not declared in this scope
     eeprom_write_block(buf,(void*)(uintptr_t)addr,size);
     ^~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AskSinPP/Storage.h: In member function 'bool as::InternalEprom::getData(uint16_t, uint8_t*, uint16_t)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AskSinPP/Storage.h:128:5: error: 'eeprom_read_block' was not declared in this scope
     eeprom_read_block(buf,(const void*)(uintptr_t)addr,size);
     ^~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AskSinPP/Storage.h:128:5: note: suggested alternative: 'pgm_read_float'
     eeprom_read_block(buf,(const void*)(uintptr_t)addr,size);
     ^~~~~~~~~~~~~~~~~
     pgm_read_float
In file included from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/tools/CMSIS-Atmel/1.2.0/CMSIS/Device/ATMEL/samd21/include/samd21.h:69:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/tools/CMSIS-Atmel/1.2.0/CMSIS/Device/ATMEL/samd.h:105,
                 from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/cores/arduino/Arduino.h:38,
                 from /tmp/arduino-sketch-43A61E002DB32EF29CCA4F5E3BBD3A69/sketch/FreqTest.ino.cpp:1:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AskSinPP/AlarmClock.h: At global scope:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/tools/CMSIS-Atmel/1.2.0/CMSIS/Device/ATMEL/samd21/include/samd21g18a.h:487:27: error: expected identifier before '(' token
 #define RTC               ((Rtc      *)0x40001400UL) /**< \brief (RTC) APB Base Address */
                           ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AskSinPP/AlarmClock.h:185:7: note: in expansion of macro 'RTC'
 class RTC : public AlarmClock {
       ^~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/tools/CMSIS-Atmel/1.2.0/CMSIS/Device/ATMEL/samd21/include/samd21g18a.h:487:38: error: expected ')' before '*' token
 #define RTC               ((Rtc      *)0x40001400UL) /**< \brief (RTC) APB Base Address */
                                      ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AskSinPP/AlarmClock.h:185:7: note: in expansion of macro 'RTC'
 class RTC : public AlarmClock {
       ^~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/tools/CMSIS-Atmel/1.2.0/CMSIS/Device/ATMEL/samd21/include/samd21g18a.h:487:38: error: expected ')' before '*' token
 #define RTC               ((Rtc      *)0x40001400UL) /**< \brief (RTC) APB Base Address */
                                      ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AskSinPP/AlarmClock.h:185:7: note: in expansion of macro 'RTC'
 class RTC : public AlarmClock {
       ^~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/tools/CMSIS-Atmel/1.2.0/CMSIS/Device/ATMEL/samd21/include/samd21g18a.h:487:38: error: expected ')' before '*' token
 #define RTC               ((Rtc      *)0x40001400UL) /**< \brief (RTC) APB Base Address */
                                      ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AskSinPP/AlarmClock.h:283:8: note: in expansion of macro 'RTC'
 extern RTC rtc;
        ^~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/tools/CMSIS-Atmel/1.2.0/CMSIS/Device/ATMEL/samd21/include/samd21g18a.h:487:38: error: expected ')' before '*' token
 #define RTC               ((Rtc      *)0x40001400UL) /**< \brief (RTC) APB Base Address */
                                      ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AskSinPP/AlarmClock.h:283:8: note: in expansion of macro 'RTC'
 extern RTC rtc;
        ^~~
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AskSinPP/Activity.h:11:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AskSinPP/AskSinPP.h:54,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AskSinPP/examples/FreqTest/FreqTest.ino:20:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AskSinPP/Radio.h: In member function 'void as::CC1101<SPIType>::setIdle()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AskSinPP/Radio.h:404:7: error: there are no arguments to '_delay_us' that depend on a template parameter, so a declaration of '_delay_us' must be available [-fpermissive]
       _delay_us(10);
       ^~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AskSinPP/Radio.h:404:7: note: (if you use '-fpermissive', G++ will accept your code, but allowing the use of an undeclared name is deprecated)
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AskSinPP/Radio.h: In member function 'uint8_t as::CC1101<SPIType>::reset()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AskSinPP/Radio.h:446:5: error: there are no arguments to '_delay_us' that depend on a template parameter, so a declaration of '_delay_us' must be available [-fpermissive]
     _delay_us(50);
     ^~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AskSinPP/Radio.h: In member function 'bool as::CC1101<SPIType>::init()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AskSinPP/Radio.h:626:5: error: there are no arguments to '_delay_ms' that depend on a template parameter, so a declaration of '_delay_ms' must be available [-fpermissive]
     _delay_ms(23);
     ^~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AskSinPP/Radio.h: In member function 'bool as::CC1101<SPIType>::initReg(uint8_t, uint8_t, uint8_t)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AskSinPP/Radio.h:647:9: error: there are no arguments to '_delay_ms' that depend on a template parameter, so a declaration of '_delay_ms' must be available [-fpermissive]
         _delay_ms(1);
         ^~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AskSinPP/Radio.h: In member function 'uint8_t as::CC1101<SPIType>::sndData(uint8_t*, uint8_t, uint8_t)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AskSinPP/Radio.h:694:7: error: there are no arguments to '_delay_us' that depend on a template parameter, so a declaration of '_delay_us' must be available [-fpermissive]
       _delay_us(100);
       ^~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AskSinPP/Radio.h:708:5: error: there are no arguments to '_delay_ms' that depend on a template parameter, so a declaration of '_delay_ms' must be available [-fpermissive]
     _delay_ms(10);
     ^~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AskSinPP/Radio.h:710:7: error: there are no arguments to '_delay_ms' that depend on a template parameter, so a declaration of '_delay_ms' must be available [-fpermissive]
       _delay_ms(350);    // according to ELV, devices get activated every 300ms, so send burst for 360ms
       ^~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AskSinPP/Radio.h:719:7: error: there are no arguments to '_delay_us' that depend on a template parameter, so a declaration of '_delay_us' must be available [-fpermissive]
       _delay_us(100);
       ^~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AskSinPP/Radio.h: In member function 'uint8_t as::CC1101<SPIType>::rcvData(uint8_t*, uint8_t)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AskSinPP/Radio.h:756:5: error: there are no arguments to '_delay_us' that depend on a template parameter, so a declaration of '_delay_us' must be available [-fpermissive]
     _delay_us(190);
     ^~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AskSinPP/Radio.h: In member function 'void as::Radio<SPIType, GDO0, SENDDELAY, HWRADIO>::MinSendTimeout::waitTimeout()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AskSinPP/Radio.h:782:11: error: there are no arguments to '_delay_ms' that depend on a template parameter, so a declaration of '_delay_ms' must be available [-fpermissive]

examples/HM-DW-WM

Result: FAIL

WARNING: library AskSinPP claims to run on avr, STM32F1 architecture(s) and may be incompatible with your current board which runs on samd architecture(s).
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AskSinPP/examples/HM-DW-WM/HM-DW-WM.ino:12:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/LowPower_LowPowerLab/LowPower.h:161:6: error: #error "Please ensure chosen MCU is a SAMD21"
     #error "Please ensure chosen MCU is a SAMD21"
      ^~~~~
Multiple libraries were found for "LowPower.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/LowPower_LowPowerLab
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Low-Power

examples/HM-ES-TX-WM

Result: FAIL

WARNING: library AskSinPP claims to run on avr, STM32F1 architecture(s) and may be incompatible with your current board which runs on samd architecture(s).
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AskSinPP/examples/HM-ES-TX-WM/HM-ES-TX-WM.ino:12:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/LowPower_LowPowerLab/LowPower.h:161:6: error: #error "Please ensure chosen MCU is a SAMD21"
     #error "Please ensure chosen MCU is a SAMD21"
      ^~~~~
Multiple libraries were found for "LowPower.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/LowPower_LowPowerLab
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Low-Power

examples/HM-LC-Bl1-FM

Result: FAIL

WARNING: library AskSinPP claims to run on avr, STM32F1 architecture(s) and may be incompatible with your current board which runs on samd architecture(s).
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AskSinPP/examples/HM-LC-Bl1-FM/HM-LC-Bl1-FM.ino:12:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/LowPower_LowPowerLab/LowPower.h:161:6: error: #error "Please ensure chosen MCU is a SAMD21"
     #error "Please ensure chosen MCU is a SAMD21"
      ^~~~~
Multiple libraries were found for "LowPower.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/LowPower_LowPowerLab
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Low-Power

examples/HM-LC-DW-WM

Result: FAIL

WARNING: library AskSinPP claims to run on avr, STM32F1 architecture(s) and may be incompatible with your current board which runs on samd architecture(s).
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AskSinPP/examples/HM-LC-DW-WM/HM-LC-DW-WM.ino:12:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/LowPower_LowPowerLab/LowPower.h:161:6: error: #error "Please ensure chosen MCU is a SAMD21"
     #error "Please ensure chosen MCU is a SAMD21"
      ^~~~~
Multiple libraries were found for "LowPower.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/LowPower_LowPowerLab
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Low-Power

examples/HM-LC-Dim1PWM-CV

Result: FAIL

WARNING: library AskSinPP claims to run on avr, STM32F1 architecture(s) and may be incompatible with your current board which runs on samd architecture(s).
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AskSinPP/examples/HM-LC-Dim1PWM-CV/HM-LC-Dim1PWM-CV.ino:12:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/LowPower_LowPowerLab/LowPower.h:161:6: error: #error "Please ensure chosen MCU is a SAMD21"
     #error "Please ensure chosen MCU is a SAMD21"
      ^~~~~
Multiple libraries were found for "LowPower.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/LowPower_LowPowerLab
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Low-Power

examples/HM-LC-Dim1TPBU-FM

Result: FAIL

WARNING: library AskSinPP claims to run on avr, STM32F1 architecture(s) and may be incompatible with your current board which runs on samd architecture(s).
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AskSinPP/AskSinPP.h:51:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AskSinPP/examples/HM-LC-Dim1TPBU-FM/HM-LC-Dim1TPBU-FM.ino:29:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AskSinPP/Storage.h: In member function 'uint16_t as::InternalEprom::size()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AskSinPP/Storage.h:93:12: error: 'E2END' was not declared in this scope
     return E2END + 1; // last EEPROM address + 1
            ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AskSinPP/Storage.h: In member function 'uint8_t as::InternalEprom::getByte(uint16_t)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AskSinPP/Storage.h:112:5: error: 'eeprom_read_block' was not declared in this scope
     eeprom_read_block(&b,(void*)(uintptr_t)addr,1);
     ^~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AskSinPP/Storage.h:112:5: note: suggested alternative: 'pgm_read_float'
     eeprom_read_block(&b,(void*)(uintptr_t)addr,1);
     ^~~~~~~~~~~~~~~~~
     pgm_read_float
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AskSinPP/Storage.h: In member function 'bool as::InternalEprom::setByte(uint16_t, uint8_t)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AskSinPP/Storage.h:118:5: error: 'eeprom_write_block' was not declared in this scope
     eeprom_write_block(&b,(void*)(uintptr_t)addr,1);
     ^~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AskSinPP/Storage.h: In member function 'bool as::InternalEprom::setData(uint16_t, uint8_t*, uint16_t)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AskSinPP/Storage.h:123:5: error: 'eeprom_write_block' was not declared in this scope
     eeprom_write_block(buf,(void*)(uintptr_t)addr,size);
     ^~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AskSinPP/Storage.h: In member function 'bool as::InternalEprom::getData(uint16_t, uint8_t*, uint16_t)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AskSinPP/Storage.h:128:5: error: 'eeprom_read_block' was not declared in this scope
     eeprom_read_block(buf,(const void*)(uintptr_t)addr,size);
     ^~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AskSinPP/Storage.h:128:5: note: suggested alternative: 'pgm_read_float'
     eeprom_read_block(buf,(const void*)(uintptr_t)addr,size);
     ^~~~~~~~~~~~~~~~~
     pgm_read_float
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AskSinPP/Storage.h: In member function 'bool as::at24cX<ID, PAGES, PAGESIZE>::waitComplete()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AskSinPP/Storage.h:288:7: error: there are no arguments to '_delay_ms' that depend on a template parameter, so a declaration of '_delay_ms' must be available [-fpermissive]
       _delay_ms(2); //no point in waiting too fast
       ^~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AskSinPP/Storage.h:288:7: note: (if you use '-fpermissive', G++ will accept your code, but allowing the use of an undeclared name is deprecated)
In file included from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/tools/CMSIS-Atmel/1.2.0/CMSIS/Device/ATMEL/samd21/include/samd21.h:69:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/tools/CMSIS-Atmel/1.2.0/CMSIS/Device/ATMEL/samd.h:105,
                 from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/cores/arduino/Arduino.h:38,
                 from /tmp/arduino-sketch-223181DF744E81D5FB09CD8D898B9100/sketch/HM-LC-Dim1TPBU-FM.ino.cpp:1:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AskSinPP/AlarmClock.h: At global scope:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/tools/CMSIS-Atmel/1.2.0/CMSIS/Device/ATMEL/samd21/include/samd21g18a.h:487:27: error: expected identifier before '(' token
 #define RTC               ((Rtc      *)0x40001400UL) /**< \brief (RTC) APB Base Address */
                           ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AskSinPP/AlarmClock.h:185:7: note: in expansion of macro 'RTC'
 class RTC : public AlarmClock {
       ^~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/tools/CMSIS-Atmel/1.2.0/CMSIS/Device/ATMEL/samd21/include/samd21g18a.h:487:38: error: expected ')' before '*' token
 #define RTC               ((Rtc      *)0x40001400UL) /**< \brief (RTC) APB Base Address */
                                      ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AskSinPP/AlarmClock.h:185:7: note: in expansion of macro 'RTC'
 class RTC : public AlarmClock {
       ^~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/tools/CMSIS-Atmel/1.2.0/CMSIS/Device/ATMEL/samd21/include/samd21g18a.h:487:38: error: expected ')' before '*' token
 #define RTC               ((Rtc      *)0x40001400UL) /**< \brief (RTC) APB Base Address */
                                      ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AskSinPP/AlarmClock.h:185:7: note: in expansion of macro 'RTC'
 class RTC : public AlarmClock {
       ^~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/tools/CMSIS-Atmel/1.2.0/CMSIS/Device/ATMEL/samd21/include/samd21g18a.h:487:38: error: expected ')' before '*' token
 #define RTC               ((Rtc      *)0x40001400UL) /**< \brief (RTC) APB Base Address */
                                      ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AskSinPP/AlarmClock.h:283:8: note: in expansion of macro 'RTC'
 extern RTC rtc;
        ^~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/tools/CMSIS-Atmel/1.2.0/CMSIS/Device/ATMEL/samd21/include/samd21g18a.h:487:38: error: expected ')' before '*' token
 #define RTC               ((Rtc      *)0x40001400UL) /**< \brief (RTC) APB Base Address */
                                      ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AskSinPP/AlarmClock.h:283:8: note: in expansion of macro 'RTC'
 extern RTC rtc;
        ^~~
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AskSinPP/Activity.h:11:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AskSinPP/AskSinPP.h:54,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AskSinPP/examples/HM-LC-Dim1TPBU-FM/HM-LC-Dim1TPBU-FM.ino:29:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AskSinPP/Radio.h: In member function 'void as::CC1101<SPIType>::setIdle()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AskSinPP/Radio.h:404:7: error: there are no arguments to '_delay_us' that depend on a template parameter, so a declaration of '_delay_us' must be available [-fpermissive]
       _delay_us(10);
       ^~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AskSinPP/Radio.h: In member function 'uint8_t as::CC1101<SPIType>::reset()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AskSinPP/Radio.h:446:5: error: there are no arguments to '_delay_us' that depend on a template parameter, so a declaration of '_delay_us' must be available [-fpermissive]
     _delay_us(50);
     ^~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AskSinPP/Radio.h: In member function 'bool as::CC1101<SPIType>::init()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AskSinPP/Radio.h:626:5: error: there are no arguments to '_delay_ms' that depend on a template parameter, so a declaration of '_delay_ms' must be available [-fpermissive]
     _delay_ms(23);
     ^~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AskSinPP/Radio.h: In member function 'bool as::CC1101<SPIType>::initReg(uint8_t, uint8_t, uint8_t)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AskSinPP/Radio.h:647:9: error: there are no arguments to '_delay_ms' that depend on a template parameter, so a declaration of '_delay_ms' must be available [-fpermissive]
         _delay_ms(1);
         ^~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AskSinPP/Radio.h: In member function 'uint8_t as::CC1101<SPIType>::sndData(uint8_t*, uint8_t, uint8_t)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AskSinPP/Radio.h:694:7: error: there are no arguments to '_delay_us' that depend on a template parameter, so a declaration of '_delay_us' must be available [-fpermissive]
       _delay_us(100);
       ^~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AskSinPP/Radio.h:708:5: error: there are no arguments to '_delay_ms' that depend on a template parameter, so a declaration of '_delay_ms' must be available [-fpermissive]
     _delay_ms(10);
     ^~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AskSinPP/Radio.h:710:7: error: there are no arguments to '_delay_ms' that depend on a template parameter, so a declaration of '_delay_ms' must be available [-fpermissive]
       _delay_ms(350);    // according to ELV, devices get activated every 300ms, so send burst for 360ms
       ^~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AskSinPP/Radio.h:719:7: error: there are no arguments to '_delay_us' that depend on a template parameter, so a declaration of '_delay_us' must be available [-fpermissive]
       _delay_us(100);
       ^~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AskSinPP/Radio.h: In member function 'uint8_t as::CC1101<SPIType>::rcvData(uint8_t*, uint8_t)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AskSinPP/Radio.h:756:5: error: there are no arguments to '_delay_us' that depend on a template parameter, so a declaration

examples/HM-LC-SW1-BA-PCB

Result: FAIL

WARNING: library AskSinPP claims to run on avr, STM32F1 architecture(s) and may be incompatible with your current board which runs on samd architecture(s).
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AskSinPP/examples/HM-LC-SW1-BA-PCB/HM-LC-SW1-BA-PCB.ino:13:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/LowPower_LowPowerLab/LowPower.h:161:6: error: #error "Please ensure chosen MCU is a SAMD21"
     #error "Please ensure chosen MCU is a SAMD21"
      ^~~~~
Multiple libraries were found for "LowPower.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/LowPower_LowPowerLab
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Low-Power

examples/HM-LC-SWX-SM

Result: FAIL

WARNING: library AskSinPP claims to run on avr, STM32F1 architecture(s) and may be incompatible with your current board which runs on samd architecture(s).
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AskSinPP/examples/HM-LC-SWX-SM/HM-LC-SWX-SM.ino:25:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/LowPower_LowPowerLab/LowPower.h:161:6: error: #error "Please ensure chosen MCU is a SAMD21"
     #error "Please ensure chosen MCU is a SAMD21"
      ^~~~~
Multiple libraries were found for "LowPower.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/LowPower_LowPowerLab
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Low-Power

examples/HM-RC-4

Result: FAIL

WARNING: library AskSinPP claims to run on avr, STM32F1 architecture(s) and may be incompatible with your current board which runs on samd architecture(s).
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AskSinPP/examples/HM-RC-4/HM-RC-4.ino:13:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/LowPower_LowPowerLab/LowPower.h:161:6: error: #error "Please ensure chosen MCU is a SAMD21"
     #error "Please ensure chosen MCU is a SAMD21"
      ^~~~~
Multiple libraries were found for "LowPower.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/LowPower_LowPowerLab
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Low-Power

examples/HM-RC-8

Result: FAIL

WARNING: library AskSinPP claims to run on avr, STM32F1 architecture(s) and may be incompatible with your current board which runs on samd architecture(s).
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AskSinPP/examples/HM-RC-8/HM-RC-8.ino:12:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/LowPower_LowPowerLab/LowPower.h:161:6: error: #error "Please ensure chosen MCU is a SAMD21"
     #error "Please ensure chosen MCU is a SAMD21"
      ^~~~~
Multiple libraries were found for "LowPower.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/LowPower_LowPowerLab
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Low-Power

examples/HM-RC-P1

Result: FAIL

WARNING: library AskSinPP claims to run on avr, STM32F1 architecture(s) and may be incompatible with your current board which runs on samd architecture(s).
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AskSinPP/examples/HM-RC-P1/HM-RC-P1.ino:12:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/LowPower_LowPowerLab/LowPower.h:161:6: error: #error "Please ensure chosen MCU is a SAMD21"
     #error "Please ensure chosen MCU is a SAMD21"
      ^~~~~
Multiple libraries were found for "LowPower.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/LowPower_LowPowerLab
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Low-Power

examples/HM-SEC-MDIR

Result: FAIL

WARNING: library AskSinPP claims to run on avr, STM32F1 architecture(s) and may be incompatible with your current board which runs on samd architecture(s).
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AskSinPP/examples/HM-SEC-MDIR/HM-SEC-MDIR.ino:12:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/LowPower_LowPowerLab/LowPower.h:161:6: error: #error "Please ensure chosen MCU is a SAMD21"
     #error "Please ensure chosen MCU is a SAMD21"
      ^~~~~
Multiple libraries were found for "LowPower.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/LowPower_LowPowerLab
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Low-Power

examples/HM-SEC-RHS

Result: FAIL

WARNING: library AskSinPP claims to run on avr, STM32F1 architecture(s) and may be incompatible with your current board which runs on samd architecture(s).
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AskSinPP/examples/HM-SEC-RHS/HM-SEC-RHS.ino:36:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/LowPower_LowPowerLab/LowPower.h:161:6: error: #error "Please ensure chosen MCU is a SAMD21"
     #error "Please ensure chosen MCU is a SAMD21"
      ^~~~~
Multiple libraries were found for "LowPower.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/LowPower_LowPowerLab
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Low-Power

examples/HM-SEC-SD

Result: FAIL

WARNING: library AskSinPP claims to run on avr, STM32F1 architecture(s) and may be incompatible with your current board which runs on samd architecture(s).
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AskSinPP/examples/HM-SEC-SD/HM-SEC-SD.ino:13:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/LowPower_LowPowerLab/LowPower.h:161:6: error: #error "Please ensure chosen MCU is a SAMD21"
     #error "Please ensure chosen MCU is a SAMD21"
      ^~~~~
Multiple libraries were found for "LowPower.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/LowPower_LowPowerLab
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Low-Power

examples/HM-SEC-WDS

Result: FAIL

WARNING: library AskSinPP claims to run on avr, STM32F1 architecture(s) and may be incompatible with your current board which runs on samd architecture(s).
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AskSinPP/examples/HM-SEC-WDS/HM-SEC-WDS.ino:12:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/LowPower_LowPowerLab/LowPower.h:161:6: error: #error "Please ensure chosen MCU is a SAMD21"
     #error "Please ensure chosen MCU is a SAMD21"
      ^~~~~
Multiple libraries were found for "LowPower.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/LowPower_LowPowerLab
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Low-Power

examples/HM-SEN-MDIR-WM55

Result: FAIL

WARNING: library AskSinPP claims to run on avr, STM32F1 architecture(s) and may be incompatible with your current board which runs on samd architecture(s).
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AskSinPP/examples/HM-SEN-MDIR-WM55/HM-SEN-MDIR-WM55.ino:14:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/LowPower_LowPowerLab/LowPower.h:161:6: error: #error "Please ensure chosen MCU is a SAMD21"
     #error "Please ensure chosen MCU is a SAMD21"
      ^~~~~
Multiple libraries were found for "LowPower.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/LowPower_LowPowerLab
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Low-Power

examples/HM-WDS10-TH-O

Result: FAIL

In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AskSinPP/examples/HM-WDS10-TH-O/HM-WDS10-TH-O.ino:13:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/LowPower_LowPowerLab/LowPower.h:161:6: error: #error "Please ensure chosen MCU is a SAMD21"
     #error "Please ensure chosen MCU is a SAMD21"
      ^~~~~
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AskSinPP/examples/HM-WDS10-TH-O/HM-WDS10-TH-O.ino:18:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AskSinPP/sensors/Sht10.h:10:10: fatal error: Sensirion.h: No such file or directory
 #include <Sensirion.h>
          ^~~~~~~~~~~~~
compilation terminated.
Multiple libraries were found for "LowPower.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/LowPower_LowPowerLab
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Low-Power

examples/HM-WDS100-C6-O-2

Result: FAIL

WARNING: library AskSinPP claims to run on avr, STM32F1 architecture(s) and may be incompatible with your current board which runs on samd architecture(s).
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AskSinPP/examples/HM-WDS100-C6-O-2/HM-WDS100-C6-O-2.ino:12:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/LowPower_LowPowerLab/LowPower.h:161:6: error: #error "Please ensure chosen MCU is a SAMD21"
     #error "Please ensure chosen MCU is a SAMD21"
      ^~~~~
Multiple libraries were found for "LowPower.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/LowPower_LowPowerLab
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Low-Power

examples/HM-WDS40-TH-I

Result: FAIL

WARNING: library AskSinPP claims to run on avr, STM32F1 architecture(s) and may be incompatible with your current board which runs on samd architecture(s).
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AskSinPP/examples/HM-WDS40-TH-I/HM-WDS40-TH-I.ino:13:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/LowPower_LowPowerLab/LowPower.h:161:6: error: #error "Please ensure chosen MCU is a SAMD21"
     #error "Please ensure chosen MCU is a SAMD21"
      ^~~~~
Multiple libraries were found for "LowPower.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/LowPower_LowPowerLab
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Low-Power

examples/custom

Result: FAIL

examples/max

Result: FAIL

examples/stm32

Result: FAIL

examples/tests

Result: FAIL

esp32:esp32:d1_mini32 @ 1.0.6

Inclusion

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AskSinPP/aes_dec.cpp:26:26: fatal error: avr/pgmspace.h: No such file or directory
compilation terminated.

examples/FreqTest

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AskSinPP/aes_dec.cpp:26:26: fatal error: avr/pgmspace.h: No such file or directory
compilation terminated.

examples/HM-DW-WM

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AskSinPP/aes_dec.cpp:26:26: fatal error: avr/pgmspace.h: No such file or directory
compilation terminated.
Multiple libraries were found for "LowPower.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/LowPower_LowPowerLab
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Low-Power

examples/HM-ES-TX-WM

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AskSinPP/aes_dec.cpp:26:26: fatal error: avr/pgmspace.h: No such file or directory
compilation terminated.
Multiple libraries were found for "LowPower.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/LowPower_LowPowerLab
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Low-Power

examples/HM-LC-Bl1-FM

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AskSinPP/aes_dec.cpp:26:26: fatal error: avr/pgmspace.h: No such file or directory
compilation terminated.
Multiple libraries were found for "LowPower.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/LowPower_LowPowerLab
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Low-Power

examples/HM-LC-DW-WM

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AskSinPP/aes_dec.cpp:26:26: fatal error: avr/pgmspace.h: No such file or directory
compilation terminated.
Multiple libraries were found for "LowPower.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/LowPower_LowPowerLab
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Low-Power

examples/HM-LC-Dim1PWM-CV

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AskSinPP/aes_dec.cpp:26:26: fatal error: avr/pgmspace.h: No such file or directory
compilation terminated.
Multiple libraries were found for "LowPower.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/LowPower_LowPowerLab
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Low-Power

examples/HM-LC-Dim1TPBU-FM

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AskSinPP/aes_dec.cpp:26:26: fatal error: avr/pgmspace.h: No such file or directory
compilation terminated.

examples/HM-LC-SW1-BA-PCB

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AskSinPP/aes_dec.cpp:26:26: fatal error: avr/pgmspace.h: No such file or directory
compilation terminated.
Multiple libraries were found for "LowPower.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/LowPower_LowPowerLab
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Low-Power

examples/HM-LC-SWX-SM

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AskSinPP/aes_dec.cpp:26:26: fatal error: avr/pgmspace.h: No such file or directory
compilation terminated.
Multiple libraries were found for "LowPower.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/LowPower_LowPowerLab
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Low-Power

examples/HM-RC-4

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AskSinPP/aes_dec.cpp:26:26: fatal error: avr/pgmspace.h: No such file or directory
compilation terminated.
Multiple libraries were found for "LowPower.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/LowPower_LowPowerLab
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Low-Power

examples/HM-RC-8

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AskSinPP/aes_dec.cpp:26:26: fatal error: avr/pgmspace.h: No such file or directory
compilation terminated.
Multiple libraries were found for "LowPower.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/LowPower_LowPowerLab
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Low-Power

examples/HM-RC-P1

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AskSinPP/aes_dec.cpp:26:26: fatal error: avr/pgmspace.h: No such file or directory
compilation terminated.
Multiple libraries were found for "LowPower.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/LowPower_LowPowerLab
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Low-Power

examples/HM-SEC-MDIR

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AskSinPP/aes_dec.cpp:26:26: fatal error: avr/pgmspace.h: No such file or directory
compilation terminated.
Multiple libraries were found for "LowPower.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/LowPower_LowPowerLab
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Low-Power

examples/HM-SEC-RHS

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AskSinPP/aes_dec.cpp:26:26: fatal error: avr/pgmspace.h: No such file or directory
compilation terminated.
Multiple libraries were found for "LowPower.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/LowPower_LowPowerLab
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Low-Power

examples/HM-SEC-SD

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AskSinPP/aes_dec.cpp:26:26: fatal error: avr/pgmspace.h: No such file or directory
compilation terminated.
Multiple libraries were found for "LowPower.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/LowPower_LowPowerLab
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Low-Power

examples/HM-SEC-WDS

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AskSinPP/aes_dec.cpp:26:26: fatal error: avr/pgmspace.h: No such file or directory
compilation terminated.
Multiple libraries were found for "LowPower.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/LowPower_LowPowerLab
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Low-Power

examples/HM-SEN-MDIR-WM55

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AskSinPP/aes_dec.cpp:26:26: fatal error: avr/pgmspace.h: No such file or directory
compilation terminated.
Multiple libraries were found for "LowPower.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/LowPower_LowPowerLab
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Low-Power

examples/HM-WDS10-TH-O

Result: FAIL

In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AskSinPP/examples/HM-WDS10-TH-O/HM-WDS10-TH-O.ino:11:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EnableInterrupt/EnableInterrupt.h:1279:2: error: #error Unsupported Arduino platform
 #error Unsupported Arduino platform
  ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EnableInterrupt/EnableInterrupt.h:1450:2: error: #error Unsupported Arduino platform
 #error Unsupported Arduino platform
  ^
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AskSinPP/examples/HM-WDS10-TH-O/HM-WDS10-TH-O.ino:13:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/LowPower_LowPowerLab/LowPower.h:166:5: error: #error "Processor architecture is not supported."
    #error "Processor architecture is not supported."
     ^
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AskSinPP/examples/HM-WDS10-TH-O/HM-WDS10-TH-O.ino:18:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AskSinPP/sensors/Sht10.h:10:23: fatal error: Sensirion.h: No such file or directory
 #include <Sensirion.h>
                       ^
compilation terminated.
Multiple libraries were found for "LowPower.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/LowPower_LowPowerLab
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Low-Power

examples/HM-WDS100-C6-O-2

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AskSinPP/aes_dec.cpp:26:26: fatal error: avr/pgmspace.h: No such file or directory
compilation terminated.
Multiple libraries were found for "LowPower.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/LowPower_LowPowerLab
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Low-Power

examples/HM-WDS40-TH-I

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AskSinPP/aes_dec.cpp:26:26: fatal error: avr/pgmspace.h: No such file or directory
compilation terminated.
Multiple libraries were found for "LowPower.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/LowPower_LowPowerLab
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Low-Power

examples/custom

Result: FAIL

examples/max

Result: FAIL

examples/stm32

Result: FAIL

examples/tests

Result: FAIL