BBQ10Keyboard - compatibility matrix

This report was generated on Wednesday, 23-Feb-22 22:48:15 CET using arduino-testlib.

BBQ10Keyboard

Version: 1.1.0
More details

Compatibility matrix

Board	Claims compatibility	Inclusion	GPIOExpander	InterruptDriven	Polling
arduino:avr:uno 1.8.4	Yes	PASS	FAIL	FAIL	FAIL
arduino:mbed_nano:nanorp2040connect 2.7.2	Yes	PASS	FAIL	FAIL	FAIL
arduino:megaavr:nona4809 1.8.7	Yes	PASS	FAIL	FAIL	FAIL
arduino:samd:mkrwifi1010 1.8.12	Yes	PASS	FAIL	FAIL	FAIL
esp32:esp32:d1_mini32 1.0.6	Yes	PASS	PASS	PASS	PASS

Compilation logs

arduino:avr:uno @ 1.8.4

Inclusion

Result: PASS

Sketch uses 1820 bytes (5%) of program storage space. Maximum is 32256 bytes.
Global variables use 126 bytes (6%) of dynamic memory, leaving 1922 bytes for local variables. Maximum is 2048 bytes.
In file included from /Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BBQ10Keyboard/src/BBQ10Keyboard.h:1:0,
                 from /Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BBQ10Keyboard/src/BBQ10Keyboard.cpp:3:
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/data/packages/arduino/hardware/avr/1.8.4/libraries/Wire/src/Wire.h: In member function 'uint8_t BBQ10Keyboard::readRegister8(uint8_t) const':
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/data/packages/arduino/hardware/avr/1.8.4/libraries/Wire/src/Wire.h:68:13: note: candidate 1: uint8_t TwoWire::requestFrom(int, int)
     uint8_t requestFrom(int, int);
             ^~~~~~~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/data/packages/arduino/hardware/avr/1.8.4/libraries/Wire/src/Wire.h:65:13: note: candidate 2: uint8_t TwoWire::requestFrom(uint8_t, uint8_t)
     uint8_t requestFrom(uint8_t, uint8_t);
             ^~~~~~~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/data/packages/arduino/hardware/avr/1.8.4/libraries/Wire/src/Wire.h: In member function 'uint16_t BBQ10Keyboard::readRegister16(uint8_t) const':
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/data/packages/arduino/hardware/avr/1.8.4/libraries/Wire/src/Wire.h:68:13: note: candidate 1: uint8_t TwoWire::requestFrom(int, int)
     uint8_t requestFrom(int, int);
             ^~~~~~~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/data/packages/arduino/hardware/avr/1.8.4/libraries/Wire/src/Wire.h:65:13: note: candidate 2: uint8_t TwoWire::requestFrom(uint8_t, uint8_t)
     uint8_t requestFrom(uint8_t, uint8_t);
             ^~~~~~~~~~~

examples/GPIOExpander

Result: FAIL

/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BBQ10Keyboard/examples/GPIOExpander/GPIOExpander.ino: In function 'void loop()':
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BBQ10Keyboard/examples/GPIOExpander/GPIOExpander.ino:24:10: error: 'class HardwareSerial' has no member named 'printf'; did you mean 'print'?
   Serial.printf("Card Detect: %d \r\n", value);
          ^~~~~~
          print

examples/InterruptDriven

Result: FAIL

/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BBQ10Keyboard/examples/InterruptDriven/InterruptDriven.ino: In function 'void loop()':
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BBQ10Keyboard/examples/InterruptDriven/InterruptDriven.ino:35:10: error: 'class HardwareSerial' has no member named 'printf'; did you mean 'print'?
   Serial.printf("key: '%c' (dec %d, hex %02x) %s\r\n", key.key, key.key, key.key, state.c_str());
          ^~~~~~
          print

examples/Polling

Result: FAIL

/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BBQ10Keyboard/examples/Polling/Polling.ino: In function 'void loop()':
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BBQ10Keyboard/examples/Polling/Polling.ino:27:10: error: 'class HardwareSerial' has no member named 'printf'; did you mean 'print'?
   Serial.printf("key: '%c' (dec %d, hex %02x) %s\r\n", key.key, key.key, key.key, state.c_str());
          ^~~~~~
          print

arduino:mbed_nano:nanorp2040connect @ 2.7.2

Inclusion

Result: PASS

Sketch uses 81706 bytes (0%) of program storage space. Maximum is 16777216 bytes.
Global variables use 44220 bytes (16%) of dynamic memory, leaving 226116 bytes for local variables. Maximum is 270336 bytes.

examples/GPIOExpander

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BBQ10Keyboard/examples/GPIOExpander/GPIOExpander.ino: In function 'void loop()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BBQ10Keyboard/examples/GPIOExpander/GPIOExpander.ino:24:10: error: 'class arduino::UART' has no member named 'printf'; did you mean 'print'?
   Serial.printf("Card Detect: %d \r\n", value);
          ^~~~~~
          print

examples/InterruptDriven

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BBQ10Keyboard/examples/InterruptDriven/InterruptDriven.ino: In function 'void loop()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BBQ10Keyboard/examples/InterruptDriven/InterruptDriven.ino:35:10: error: 'class arduino::UART' has no member named 'printf'; did you mean 'print'?
   Serial.printf("key: '%c' (dec %d, hex %02x) %s\r\n", key.key, key.key, key.key, state.c_str());
          ^~~~~~
          print

examples/Polling

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BBQ10Keyboard/examples/Polling/Polling.ino: In function 'void loop()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BBQ10Keyboard/examples/Polling/Polling.ino:27:10: error: 'class arduino::UART' has no member named 'printf'; did you mean 'print'?
   Serial.printf("key: '%c' (dec %d, hex %02x) %s\r\n", key.key, key.key, key.key, state.c_str());
          ^~~~~~
          print

arduino:megaavr:nona4809 @ 1.8.7

Inclusion

Result: PASS

Sketch uses 3656 bytes (7%) of program storage space. Maximum is 49152 bytes.
Global variables use 413 bytes (6%) of dynamic memory, leaving 5731 bytes for local variables. Maximum is 6144 bytes.
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BBQ10Keyboard/src/BBQ10Keyboard.h:1:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BBQ10Keyboard/src/BBQ10Keyboard.cpp:3:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h: In member function 'uint8_t BBQ10Keyboard::readRegister8(uint8_t) const':
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:63:12: note: candidate 1: size_t TwoWire::requestFrom(int, int)
     size_t requestFrom(int, int);
            ^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:61:12: note: candidate 2: virtual size_t TwoWire::requestFrom(uint8_t, size_t)
     size_t requestFrom(uint8_t, size_t);
            ^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h: In member function 'uint16_t BBQ10Keyboard::readRegister16(uint8_t) const':
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:63:12: note: candidate 1: size_t TwoWire::requestFrom(int, int)
     size_t requestFrom(int, int);
            ^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:61:12: note: candidate 2: virtual size_t TwoWire::requestFrom(uint8_t, size_t)
     size_t requestFrom(uint8_t, size_t);
            ^~~~~~~~~~~

examples/GPIOExpander

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BBQ10Keyboard/examples/GPIOExpander/GPIOExpander.ino: In function 'void loop()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BBQ10Keyboard/examples/GPIOExpander/GPIOExpander.ino:24:10: error: 'class UartClass' has no member named 'printf'; did you mean 'print'?
   Serial.printf("Card Detect: %d \r\n", value);
          ^~~~~~
          print

examples/InterruptDriven

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BBQ10Keyboard/examples/InterruptDriven/InterruptDriven.ino: In function 'void loop()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BBQ10Keyboard/examples/InterruptDriven/InterruptDriven.ino:35:10: error: 'class UartClass' has no member named 'printf'; did you mean 'print'?
   Serial.printf("key: '%c' (dec %d, hex %02x) %s\r\n", key.key, key.key, key.key, state.c_str());
          ^~~~~~
          print

examples/Polling

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BBQ10Keyboard/examples/Polling/Polling.ino: In function 'void loop()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BBQ10Keyboard/examples/Polling/Polling.ino:27:10: error: 'class UartClass' has no member named 'printf'; did you mean 'print'?
   Serial.printf("key: '%c' (dec %d, hex %02x) %s\r\n", key.key, key.key, key.key, state.c_str());
          ^~~~~~
          print

arduino:samd:mkrwifi1010 @ 1.8.12

Inclusion

Result: PASS

Sketch uses 13648 bytes (5%) of program storage space. Maximum is 262144 bytes.
Global variables use 3708 bytes (11%) of dynamic memory, leaving 29060 bytes for local variables. Maximum is 32768 bytes.

examples/GPIOExpander

Result: FAIL

/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BBQ10Keyboard/examples/GPIOExpander/GPIOExpander.ino: In function 'void loop()':
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BBQ10Keyboard/examples/GPIOExpander/GPIOExpander.ino:24:10: error: 'class Serial_' has no member named 'printf'; did you mean 'print'?
   Serial.printf("Card Detect: %d \r\n", value);
          ^~~~~~
          print

examples/InterruptDriven

Result: FAIL

/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BBQ10Keyboard/examples/InterruptDriven/InterruptDriven.ino: In function 'void loop()':
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BBQ10Keyboard/examples/InterruptDriven/InterruptDriven.ino:35:10: error: 'class Serial_' has no member named 'printf'; did you mean 'print'?
   Serial.printf("key: '%c' (dec %d, hex %02x) %s\r\n", key.key, key.key, key.key, state.c_str());
          ^~~~~~
          print

examples/Polling

Result: FAIL

/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BBQ10Keyboard/examples/Polling/Polling.ino: In function 'void loop()':
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BBQ10Keyboard/examples/Polling/Polling.ino:27:10: error: 'class Serial_' has no member named 'printf'; did you mean 'print'?
   Serial.printf("key: '%c' (dec %d, hex %02x) %s\r\n", key.key, key.key, key.key, state.c_str());
          ^~~~~~
          print

esp32:esp32:d1_mini32 @ 1.0.6

Inclusion

Result: PASS

Sketch uses 202850 bytes (15%) of program storage space. Maximum is 1310720 bytes.
Global variables use 13880 bytes (4%) of dynamic memory, leaving 313800 bytes for local variables. Maximum is 327680 bytes.
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BBQ10Keyboard/src/BBQ10Keyboard.h:1:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BBQ10Keyboard/src/BBQ10Keyboard.cpp:3:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/esp32/hardware/esp32/1.0.6/libraries/Wire/src/Wire.h: In member function 'uint8_t BBQ10Keyboard::readRegister8(uint8_t) const':
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/esp32/hardware/esp32/1.0.6/libraries/Wire/src/Wire.h:103:13: note: candidate 1: uint8_t TwoWire::requestFrom(int, int)
     uint8_t requestFrom(int address, int size);
             ^
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/esp32/hardware/esp32/1.0.6/libraries/Wire/src/Wire.h:101:13: note: candidate 2: uint8_t TwoWire::requestFrom(uint8_t, uint8_t)
     uint8_t requestFrom(uint8_t address, uint8_t size);
             ^
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/esp32/hardware/esp32/1.0.6/libraries/Wire/src/Wire.h: In member function 'uint16_t BBQ10Keyboard::readRegister16(uint8_t) const':
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/esp32/hardware/esp32/1.0.6/libraries/Wire/src/Wire.h:103:13: note: candidate 1: uint8_t TwoWire::requestFrom(int, int)
     uint8_t requestFrom(int address, int size);
             ^
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/esp32/hardware/esp32/1.0.6/libraries/Wire/src/Wire.h:101:13: note: candidate 2: uint8_t TwoWire::requestFrom(uint8_t, uint8_t)
     uint8_t requestFrom(uint8_t address, uint8_t size);
             ^

examples/GPIOExpander

Result: PASS

Sketch uses 214070 bytes (16%) of program storage space. Maximum is 1310720 bytes.
Global variables use 14144 bytes (4%) of dynamic memory, leaving 313536 bytes for local variables. Maximum is 327680 bytes.
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BBQ10Keyboard/src/BBQ10Keyboard.h:1:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BBQ10Keyboard/src/BBQ10Keyboard.cpp:3:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/esp32/hardware/esp32/1.0.6/libraries/Wire/src/Wire.h: In member function 'uint8_t BBQ10Keyboard::readRegister8(uint8_t) const':
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/esp32/hardware/esp32/1.0.6/libraries/Wire/src/Wire.h:103:13: note: candidate 1: uint8_t TwoWire::requestFrom(int, int)
     uint8_t requestFrom(int address, int size);
             ^
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/esp32/hardware/esp32/1.0.6/libraries/Wire/src/Wire.h:101:13: note: candidate 2: uint8_t TwoWire::requestFrom(uint8_t, uint8_t)
     uint8_t requestFrom(uint8_t address, uint8_t size);
             ^
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/esp32/hardware/esp32/1.0.6/libraries/Wire/src/Wire.h: In member function 'uint16_t BBQ10Keyboard::readRegister16(uint8_t) const':
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/esp32/hardware/esp32/1.0.6/libraries/Wire/src/Wire.h:103:13: note: candidate 1: uint8_t TwoWire::requestFrom(int, int)
     uint8_t requestFrom(int address, int size);
             ^
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/esp32/hardware/esp32/1.0.6/libraries/Wire/src/Wire.h:101:13: note: candidate 2: uint8_t TwoWire::requestFrom(uint8_t, uint8_t)
     uint8_t requestFrom(uint8_t address, uint8_t size);
             ^

examples/InterruptDriven

Result: PASS

Sketch uses 214858 bytes (16%) of program storage space. Maximum is 1310720 bytes.
Global variables use 14632 bytes (4%) of dynamic memory, leaving 313048 bytes for local variables. Maximum is 327680 bytes.
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BBQ10Keyboard/src/BBQ10Keyboard.h:1:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BBQ10Keyboard/src/BBQ10Keyboard.cpp:3:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/esp32/hardware/esp32/1.0.6/libraries/Wire/src/Wire.h: In member function 'uint8_t BBQ10Keyboard::readRegister8(uint8_t) const':
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/esp32/hardware/esp32/1.0.6/libraries/Wire/src/Wire.h:103:13: note: candidate 1: uint8_t TwoWire::requestFrom(int, int)
     uint8_t requestFrom(int address, int size);
             ^
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/esp32/hardware/esp32/1.0.6/libraries/Wire/src/Wire.h:101:13: note: candidate 2: uint8_t TwoWire::requestFrom(uint8_t, uint8_t)
     uint8_t requestFrom(uint8_t address, uint8_t size);
             ^
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/esp32/hardware/esp32/1.0.6/libraries/Wire/src/Wire.h: In member function 'uint16_t BBQ10Keyboard::readRegister16(uint8_t) const':
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/esp32/hardware/esp32/1.0.6/libraries/Wire/src/Wire.h:103:13: note: candidate 1: uint8_t TwoWire::requestFrom(int, int)
     uint8_t requestFrom(int address, int size);
             ^
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/esp32/hardware/esp32/1.0.6/libraries/Wire/src/Wire.h:101:13: note: candidate 2: uint8_t TwoWire::requestFrom(uint8_t, uint8_t)
     uint8_t requestFrom(uint8_t address, uint8_t size);
             ^

examples/Polling

Result: PASS

Sketch uses 214342 bytes (16%) of program storage space. Maximum is 1310720 bytes.
Global variables use 14144 bytes (4%) of dynamic memory, leaving 313536 bytes for local variables. Maximum is 327680 bytes.
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BBQ10Keyboard/src/BBQ10Keyboard.h:1:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BBQ10Keyboard/src/BBQ10Keyboard.cpp:3:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/esp32/hardware/esp32/1.0.6/libraries/Wire/src/Wire.h: In member function 'uint8_t BBQ10Keyboard::readRegister8(uint8_t) const':
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/esp32/hardware/esp32/1.0.6/libraries/Wire/src/Wire.h:103:13: note: candidate 1: uint8_t TwoWire::requestFrom(int, int)
     uint8_t requestFrom(int address, int size);
             ^
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/esp32/hardware/esp32/1.0.6/libraries/Wire/src/Wire.h:101:13: note: candidate 2: uint8_t TwoWire::requestFrom(uint8_t, uint8_t)
     uint8_t requestFrom(uint8_t address, uint8_t size);
             ^
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/esp32/hardware/esp32/1.0.6/libraries/Wire/src/Wire.h: In member function 'uint16_t BBQ10Keyboard::readRegister16(uint8_t) const':
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/esp32/hardware/esp32/1.0.6/libraries/Wire/src/Wire.h:103:13: note: candidate 1: uint8_t TwoWire::requestFrom(int, int)
     uint8_t requestFrom(int address, int size);
             ^
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/esp32/hardware/esp32/1.0.6/libraries/Wire/src/Wire.h:101:13: note: candidate 2: uint8_t TwoWire::requestFrom(uint8_t, uint8_t)
     uint8_t requestFrom(uint8_t address, uint8_t size);
             ^