BME280_Zanshin - compatibility matrix

This report was generated on Wednesday, 23-Feb-22 22:48:15 CET using arduino-testlib.

BME280_Zanshin

Version: 1.0.4
More details

Compatibility matrix

Board	Claims compatibility	Inclusion	I2CDemo	SPIDemo	SoftSPIDemo
arduino:avr:uno 1.8.4	Yes	PASS	FAIL	FAIL	FAIL
arduino:mbed_nano:nanorp2040connect 2.7.2	Yes	PASS	FAIL	FAIL	FAIL
arduino:megaavr:nona4809 1.8.7	Yes	PASS	FAIL	FAIL	FAIL
arduino:samd:mkrwifi1010 1.8.12	Yes	PASS	FAIL	FAIL	FAIL
esp32:esp32:d1_mini32 1.0.6	Yes	PASS	FAIL	FAIL	FAIL

Compilation logs

arduino:avr:uno @ 1.8.4

Inclusion

Result: PASS
This library has no main header file so an empty one was created.

Sketch uses 1636 bytes (5%) of program storage space. Maximum is 32256 bytes.
Global variables use 122 bytes (5%) of dynamic memory, leaving 1926 bytes for local variables. Maximum is 2048 bytes.

examples/I2CDemo

Result: FAIL

/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BME280_Zanshin/examples/I2CDemo/I2CDemo.ino:61:1: error: 'BME280_Class' does not name a type; did you mean 'BME280'?
 BME280_Class   BME280; ///< Create an instance of the BME280 class
 ^~~~~~~~~~~~
 BME280
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BME280_Zanshin/examples/I2CDemo/I2CDemo.ino: In function 'float altitude(float)':
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BME280_Zanshin/examples/I2CDemo/I2CDemo.ino:74:9: error: expected unqualified-id before '.' token
   BME280.getSensorData(temp, hum, press); // Get the most recent values from the device
         ^
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BME280_Zanshin/examples/I2CDemo/I2CDemo.ino: In function 'void setup()':
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BME280_Zanshin/examples/I2CDemo/I2CDemo.ino:94:17: error: expected primary-expression before '.' token
   while (!BME280.begin(I2C_FAST_MODE_PLUS_MODE)) // Start BME280 using I2C protocol
                 ^
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BME280_Zanshin/examples/I2CDemo/I2CDemo.ino:94:24: error: 'I2C_FAST_MODE_PLUS_MODE' was not declared in this scope
   while (!BME280.begin(I2C_FAST_MODE_PLUS_MODE)) // Start BME280 using I2C protocol
                        ^~~~~~~~~~~~~~~~~~~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BME280_Zanshin/examples/I2CDemo/I2CDemo.ino:99:9: error: expected unqualified-id before '.' token
   BME280.mode(SleepMode);
         ^
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BME280_Zanshin/examples/I2CDemo/I2CDemo.ino:101:22: error: expected primary-expression before '.' token
   Serial.print(BME280.mode());
                      ^
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BME280_Zanshin/examples/I2CDemo/I2CDemo.ino:103:12: error: expected primary-expression before '.' token
   if(BME280.mode()==0)
            ^
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BME280_Zanshin/examples/I2CDemo/I2CDemo.ino:106:24: error: expected primary-expression before '.' token
     Serial.print(BME280.mode(NormalMode)); // Use enumerated type values
                        ^
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BME280_Zanshin/examples/I2CDemo/I2CDemo.ino:106:30: error: 'NormalMode' was not declared in this scope
     Serial.print(BME280.mode(NormalMode)); // Use enumerated type values
                              ^~~~~~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BME280_Zanshin/examples/I2CDemo/I2CDemo.ino:110:9: error: expected unqualified-id before '.' token
   BME280.setOversampling(TemperatureSensor,Oversample16);
         ^
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BME280_Zanshin/examples/I2CDemo/I2CDemo.ino:111:9: error: expected unqualified-id before '.' token
   BME280.setOversampling(HumiditySensor,   Oversample16);
         ^
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BME280_Zanshin/examples/I2CDemo/I2CDemo.ino:112:9: error: expected unqualified-id before '.' token
   BME280.setOversampling(PressureSensor,   Oversample16);
         ^
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BME280_Zanshin/examples/I2CDemo/I2CDemo.ino:114:9: error: expected unqualified-id before '.' token
   BME280.iirFilter(IIR16);
         ^
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BME280_Zanshin/examples/I2CDemo/I2CDemo.ino:116:9: error: expected unqualified-id before '.' token
   BME280.inactiveTime(inactive1000ms);
         ^
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BME280_Zanshin/examples/I2CDemo/I2CDemo.ino:118:22: error: expected primary-expression before '.' token
   Serial.print(BME280.measurementTime(MaximumMeasure)/1000);
                      ^
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BME280_Zanshin/examples/I2CDemo/I2CDemo.ino:118:39: error: 'MaximumMeasure' was not declared in this scope
   Serial.print(BME280.measurementTime(MaximumMeasure)/1000);
                                       ^~~~~~~~~~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BME280_Zanshin/examples/I2CDemo/I2CDemo.ino: In function 'void loop()':
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BME280_Zanshin/examples/I2CDemo/I2CDemo.ino:131:9: error: expected unqualified-id before '.' token
   BME280.getSensorData(temperature,humidity,pressure); // Get most recent readings
         ^
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BME280_Zanshin/examples/I2CDemo/I2CDemo.ino:135:13: error: expected primary-expression before '.' token
   if (BME280.getOversampling(HumiditySensor)!=0)
             ^
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BME280_Zanshin/examples/I2CDemo/I2CDemo.ino:135:30: error: 'HumiditySensor' was not declared in this scope
   if (BME280.getOversampling(HumiditySensor)!=0)
                              ^~~~~~~~~~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BME280_Zanshin/examples/I2CDemo/I2CDemo.ino:135:30: note: suggested alternative: 'humidity'
   if (BME280.getOversampling(HumiditySensor)!=0)
                              ^~~~~~~~~~~~~~
                              humidity
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BME280_Zanshin/examples/I2CDemo/I2CDemo.ino:150:15: error: expected primary-expression before '.' token
     if (BME280.getOversampling(HumiditySensor)==0)
               ^
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BME280_Zanshin/examples/I2CDemo/I2CDemo.ino:150:32: error: 'HumiditySensor' was not declared in this scope
     if (BME280.getOversampling(HumiditySensor)==0)
                                ^~~~~~~~~~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BME280_Zanshin/examples/I2CDemo/I2CDemo.ino:150:32: note: suggested alternative: 'humidity'
     if (BME280.getOversampling(HumiditySensor)==0)
                                ^~~~~~~~~~~~~~
                                humidity
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BME280_Zanshin/examples/I2CDemo/I2CDemo.ino:152:13: error: expected unqualified-id before '.' token
       BME280.setOversampling(HumiditySensor,Oversample16); // Turn humidity sensing on
             ^
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BME280_Zanshin/examples/I2CDemo/I2CDemo.ino:156:13: error: expected unqualified-id before '.' token
       BME280.setOversampling(HumiditySensor,SensorOff);
             ^
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BME280_Zanshin/examples/I2CDemo/I2CDemo.ino:160:11: error: expected unqualified-id before '.' token
     BME280.setOversampling(HumiditySensor,SensorOff); // No longer interested in humidity
           ^
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BME280_Zanshin/examples/I2CDemo/I2CDemo.ino:162:24: error: expected primary-expression before '.' token
     Serial.print(BME280.measurementTime(MaximumMeasure)/1000.0); // returns microseconds
                        ^
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BME280_Zanshin/examples/I2CDemo/I2CDemo.ino:162:41: error: 'MaximumMeasure' was not declared in this scope
     Serial.print(BME280.measurementTime(MaximumMeasure)/1000.0); // returns microseconds
                                         ^~~~~~~~~~~~~~
Multiple libraries were found for "BME280.h"
  Used: /Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BME280
  Not used: /Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BME280_Zanshin

examples/SPIDemo

Result: FAIL

/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BME280_Zanshin/examples/SPIDemo/SPIDemo.ino:66:1: error: 'BME280_Class' does not name a type; did you mean 'BME280'?
 BME280_Class   BME280; ///< Create an instance of the BME280 class
 ^~~~~~~~~~~~
 BME280
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BME280_Zanshin/examples/SPIDemo/SPIDemo.ino: In function 'float altitude(float)':
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BME280_Zanshin/examples/SPIDemo/SPIDemo.ino:79:9: error: expected unqualified-id before '.' token
   BME280.getSensorData(temp, hum, press); // Get the most recent values from the device
         ^
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BME280_Zanshin/examples/SPIDemo/SPIDemo.ino: In function 'void setup()':
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BME280_Zanshin/examples/SPIDemo/SPIDemo.ino:99:17: error: expected primary-expression before '.' token
   while (!BME280.begin(SPI_CS_PIN))
                 ^
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BME280_Zanshin/examples/SPIDemo/SPIDemo.ino:104:9: error: expected unqualified-id before '.' token
   BME280.mode(SleepMode);
         ^
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BME280_Zanshin/examples/SPIDemo/SPIDemo.ino:106:22: error: expected primary-expression before '.' token
   Serial.print(BME280.mode());
                      ^
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BME280_Zanshin/examples/SPIDemo/SPIDemo.ino:108:12: error: expected primary-expression before '.' token
   if(BME280.mode()==0)
            ^
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BME280_Zanshin/examples/SPIDemo/SPIDemo.ino:111:24: error: expected primary-expression before '.' token
     Serial.print(BME280.mode(NormalMode));
                        ^
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BME280_Zanshin/examples/SPIDemo/SPIDemo.ino:111:30: error: 'NormalMode' was not declared in this scope
     Serial.print(BME280.mode(NormalMode));
                              ^~~~~~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BME280_Zanshin/examples/SPIDemo/SPIDemo.ino:115:9: error: expected unqualified-id before '.' token
   BME280.setOversampling(TemperatureSensor,Oversample16);
         ^
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BME280_Zanshin/examples/SPIDemo/SPIDemo.ino:116:9: error: expected unqualified-id before '.' token
   BME280.setOversampling(HumiditySensor,   Oversample16);
         ^
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BME280_Zanshin/examples/SPIDemo/SPIDemo.ino:117:9: error: expected unqualified-id before '.' token
   BME280.setOversampling(PressureSensor,   Oversample16);
         ^
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BME280_Zanshin/examples/SPIDemo/SPIDemo.ino:119:9: error: expected unqualified-id before '.' token
   BME280.iirFilter(IIR16); // Use enumerated type values
         ^
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BME280_Zanshin/examples/SPIDemo/SPIDemo.ino:121:9: error: expected unqualified-id before '.' token
   BME280.inactiveTime(inactive1000ms);
         ^
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BME280_Zanshin/examples/SPIDemo/SPIDemo.ino:123:22: error: expected primary-expression before '.' token
   Serial.print(BME280.measurementTime(MaximumMeasure)/1000); // returns microseconds
                      ^
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BME280_Zanshin/examples/SPIDemo/SPIDemo.ino:123:39: error: 'MaximumMeasure' was not declared in this scope
   Serial.print(BME280.measurementTime(MaximumMeasure)/1000); // returns microseconds
                                       ^~~~~~~~~~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BME280_Zanshin/examples/SPIDemo/SPIDemo.ino: In function 'void loop()':
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BME280_Zanshin/examples/SPIDemo/SPIDemo.ino:136:9: error: expected unqualified-id before '.' token
   BME280.getSensorData(temperature,humidity,pressure); // Get most recent readings
         ^
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BME280_Zanshin/examples/SPIDemo/SPIDemo.ino:140:13: error: expected primary-expression before '.' token
   if (BME280.getOversampling(HumiditySensor)!=0)
             ^
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BME280_Zanshin/examples/SPIDemo/SPIDemo.ino:140:30: error: 'HumiditySensor' was not declared in this scope
   if (BME280.getOversampling(HumiditySensor)!=0)
                              ^~~~~~~~~~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BME280_Zanshin/examples/SPIDemo/SPIDemo.ino:140:30: note: suggested alternative: 'humidity'
   if (BME280.getOversampling(HumiditySensor)!=0)
                              ^~~~~~~~~~~~~~
                              humidity
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BME280_Zanshin/examples/SPIDemo/SPIDemo.ino:155:15: error: expected primary-expression before '.' token
     if (BME280.getOversampling(HumiditySensor)==0)
               ^
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BME280_Zanshin/examples/SPIDemo/SPIDemo.ino:155:32: error: 'HumiditySensor' was not declared in this scope
     if (BME280.getOversampling(HumiditySensor)==0)
                                ^~~~~~~~~~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BME280_Zanshin/examples/SPIDemo/SPIDemo.ino:155:32: note: suggested alternative: 'humidity'
     if (BME280.getOversampling(HumiditySensor)==0)
                                ^~~~~~~~~~~~~~
                                humidity
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BME280_Zanshin/examples/SPIDemo/SPIDemo.ino:157:13: error: expected unqualified-id before '.' token
       BME280.setOversampling(HumiditySensor,Oversample16); // Turn humidity sensing on
             ^
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BME280_Zanshin/examples/SPIDemo/SPIDemo.ino:161:13: error: expected unqualified-id before '.' token
       BME280.setOversampling(HumiditySensor,SensorOff); // No longer interested in humidity
             ^
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BME280_Zanshin/examples/SPIDemo/SPIDemo.ino:166:24: error: expected primary-expression before '.' token
     Serial.print(BME280.measurementTime(MaximumMeasure)/1000.0); // returns microseconds
                        ^
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BME280_Zanshin/examples/SPIDemo/SPIDemo.ino:166:41: error: 'MaximumMeasure' was not declared in this scope
     Serial.print(BME280.measurementTime(MaximumMeasure)/1000.0); // returns microseconds
                                         ^~~~~~~~~~~~~~
Multiple libraries were found for "BME280.h"
  Used: /Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BME280
  Not used: /Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BME280_Zanshin

examples/SoftSPIDemo

Result: FAIL

/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BME280_Zanshin/examples/SoftSPIDemo/SoftSPIDemo.ino:75:1: error: 'BME280_Class' does not name a type; did you mean 'BME280'?
 BME280_Class   BME280;   // Create an instance of the BME280 //
 ^~~~~~~~~~~~
 BME280
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BME280_Zanshin/examples/SoftSPIDemo/SoftSPIDemo.ino: In function 'float altitude(float)':
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BME280_Zanshin/examples/SoftSPIDemo/SoftSPIDemo.ino:88:9: error: expected unqualified-id before '.' token
   BME280.getSensorData(temp, hum, press); // Get the most recent values from the device
         ^
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BME280_Zanshin/examples/SoftSPIDemo/SoftSPIDemo.ino: In function 'void setup()':
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BME280_Zanshin/examples/SoftSPIDemo/SoftSPIDemo.ino:108:17: error: expected primary-expression before '.' token
   while (!BME280.begin(SPI_CS_PIN,SPI_MOSI_PIN,SPI_MISO_PIN,SPI_SCK_PIN)) // Start using software SPI protocol//
                 ^
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BME280_Zanshin/examples/SoftSPIDemo/SoftSPIDemo.ino:113:9: error: expected unqualified-id before '.' token
   BME280.mode(SleepMode);
         ^
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BME280_Zanshin/examples/SoftSPIDemo/SoftSPIDemo.ino:115:22: error: expected primary-expression before '.' token
   Serial.print(BME280.mode());
                      ^
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BME280_Zanshin/examples/SoftSPIDemo/SoftSPIDemo.ino:117:12: error: expected primary-expression before '.' token
   if(BME280.mode()==0)
            ^
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BME280_Zanshin/examples/SoftSPIDemo/SoftSPIDemo.ino:120:24: error: expected primary-expression before '.' token
     Serial.print(BME280.mode(NormalMode));
                        ^
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BME280_Zanshin/examples/SoftSPIDemo/SoftSPIDemo.ino:120:30: error: 'NormalMode' was not declared in this scope
     Serial.print(BME280.mode(NormalMode));
                              ^~~~~~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BME280_Zanshin/examples/SoftSPIDemo/SoftSPIDemo.ino:124:9: error: expected unqualified-id before '.' token
   BME280.setOversampling(TemperatureSensor,Oversample16);
         ^
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BME280_Zanshin/examples/SoftSPIDemo/SoftSPIDemo.ino:125:9: error: expected unqualified-id before '.' token
   BME280.setOversampling(HumiditySensor,   Oversample16);
         ^
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BME280_Zanshin/examples/SoftSPIDemo/SoftSPIDemo.ino:126:9: error: expected unqualified-id before '.' token
   BME280.setOversampling(PressureSensor,   Oversample16);
         ^
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BME280_Zanshin/examples/SoftSPIDemo/SoftSPIDemo.ino:128:9: error: expected unqualified-id before '.' token
   BME280.iirFilter(IIR16);
         ^
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BME280_Zanshin/examples/SoftSPIDemo/SoftSPIDemo.ino:130:9: error: expected unqualified-id before '.' token
   BME280.inactiveTime(inactive1000ms);
         ^
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BME280_Zanshin/examples/SoftSPIDemo/SoftSPIDemo.ino:132:22: error: expected primary-expression before '.' token
   Serial.print(BME280.measurementTime(MaximumMeasure)/1000);
                      ^
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BME280_Zanshin/examples/SoftSPIDemo/SoftSPIDemo.ino:132:39: error: 'MaximumMeasure' was not declared in this scope
   Serial.print(BME280.measurementTime(MaximumMeasure)/1000);
                                       ^~~~~~~~~~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BME280_Zanshin/examples/SoftSPIDemo/SoftSPIDemo.ino: In function 'void loop()':
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BME280_Zanshin/examples/SoftSPIDemo/SoftSPIDemo.ino:145:9: error: expected unqualified-id before '.' token
   BME280.getSensorData(temperature,humidity,pressure); // Get most recent readings
         ^
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BME280_Zanshin/examples/SoftSPIDemo/SoftSPIDemo.ino:149:13: error: expected primary-expression before '.' token
   if (BME280.getOversampling(HumiditySensor)!=0)
             ^
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BME280_Zanshin/examples/SoftSPIDemo/SoftSPIDemo.ino:149:30: error: 'HumiditySensor' was not declared in this scope
   if (BME280.getOversampling(HumiditySensor)!=0)
                              ^~~~~~~~~~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BME280_Zanshin/examples/SoftSPIDemo/SoftSPIDemo.ino:149:30: note: suggested alternative: 'humidity'
   if (BME280.getOversampling(HumiditySensor)!=0)
                              ^~~~~~~~~~~~~~
                              humidity
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BME280_Zanshin/examples/SoftSPIDemo/SoftSPIDemo.ino:164:15: error: expected primary-expression before '.' token
     if (BME280.getOversampling(HumiditySensor)==0)
               ^
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BME280_Zanshin/examples/SoftSPIDemo/SoftSPIDemo.ino:164:32: error: 'HumiditySensor' was not declared in this scope
     if (BME280.getOversampling(HumiditySensor)==0)
                                ^~~~~~~~~~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BME280_Zanshin/examples/SoftSPIDemo/SoftSPIDemo.ino:164:32: note: suggested alternative: 'humidity'
     if (BME280.getOversampling(HumiditySensor)==0)
                                ^~~~~~~~~~~~~~
                                humidity
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BME280_Zanshin/examples/SoftSPIDemo/SoftSPIDemo.ino:166:13: error: expected unqualified-id before '.' token
       BME280.setOversampling(HumiditySensor,Oversample16);
             ^
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BME280_Zanshin/examples/SoftSPIDemo/SoftSPIDemo.ino:170:13: error: expected unqualified-id before '.' token
       BME280.setOversampling(HumiditySensor,SensorOff);
             ^
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BME280_Zanshin/examples/SoftSPIDemo/SoftSPIDemo.ino:175:24: error: expected primary-expression before '.' token
     Serial.print(BME280.measurementTime(MaximumMeasure)/1000.0); // returns microseconds
                        ^
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BME280_Zanshin/examples/SoftSPIDemo/SoftSPIDemo.ino:175:41: error: 'MaximumMeasure' was not declared in this scope
     Serial.print(BME280.measurementTime(MaximumMeasure)/1000.0); // returns microseconds
                                         ^~~~~~~~~~~~~~
Multiple libraries were found for "BME280.h"
  Used: /Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BME280
  Not used: /Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BME280_Zanshin

arduino:mbed_nano:nanorp2040connect @ 2.7.2

Inclusion

Result: PASS

Sketch uses 83608 bytes (0%) of program storage space. Maximum is 16777216 bytes.
Global variables use 44392 bytes (16%) of dynamic memory, leaving 225944 bytes for local variables. Maximum is 270336 bytes.

examples/I2CDemo

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BME280_Zanshin/examples/I2CDemo/I2CDemo.ino:61:1: error: 'BME280_Class' does not name a type; did you mean 'BME280'?
 BME280_Class   BME280; ///< Create an instance of the BME280 class
 ^~~~~~~~~~~~
 BME280
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BME280_Zanshin/examples/I2CDemo/I2CDemo.ino: In function 'float altitude(float)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BME280_Zanshin/examples/I2CDemo/I2CDemo.ino:74:9: error: expected unqualified-id before '.' token
   BME280.getSensorData(temp, hum, press); // Get the most recent values from the device
         ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BME280_Zanshin/examples/I2CDemo/I2CDemo.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BME280_Zanshin/examples/I2CDemo/I2CDemo.ino:94:17: error: expected primary-expression before '.' token
   while (!BME280.begin(I2C_FAST_MODE_PLUS_MODE)) // Start BME280 using I2C protocol
                 ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BME280_Zanshin/examples/I2CDemo/I2CDemo.ino:94:24: error: 'I2C_FAST_MODE_PLUS_MODE' was not declared in this scope
   while (!BME280.begin(I2C_FAST_MODE_PLUS_MODE)) // Start BME280 using I2C protocol
                        ^~~~~~~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BME280_Zanshin/examples/I2CDemo/I2CDemo.ino:99:9: error: expected unqualified-id before '.' token
   BME280.mode(SleepMode);
         ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BME280_Zanshin/examples/I2CDemo/I2CDemo.ino:101:22: error: expected primary-expression before '.' token
   Serial.print(BME280.mode());
                      ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BME280_Zanshin/examples/I2CDemo/I2CDemo.ino:103:12: error: expected primary-expression before '.' token
   if(BME280.mode()==0)
            ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BME280_Zanshin/examples/I2CDemo/I2CDemo.ino:106:24: error: expected primary-expression before '.' token
     Serial.print(BME280.mode(NormalMode)); // Use enumerated type values
                        ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BME280_Zanshin/examples/I2CDemo/I2CDemo.ino:106:30: error: 'NormalMode' was not declared in this scope
     Serial.print(BME280.mode(NormalMode)); // Use enumerated type values
                              ^~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BME280_Zanshin/examples/I2CDemo/I2CDemo.ino:110:9: error: expected unqualified-id before '.' token
   BME280.setOversampling(TemperatureSensor,Oversample16);
         ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BME280_Zanshin/examples/I2CDemo/I2CDemo.ino:111:9: error: expected unqualified-id before '.' token
   BME280.setOversampling(HumiditySensor,   Oversample16);
         ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BME280_Zanshin/examples/I2CDemo/I2CDemo.ino:112:9: error: expected unqualified-id before '.' token
   BME280.setOversampling(PressureSensor,   Oversample16);
         ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BME280_Zanshin/examples/I2CDemo/I2CDemo.ino:114:9: error: expected unqualified-id before '.' token
   BME280.iirFilter(IIR16);
         ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BME280_Zanshin/examples/I2CDemo/I2CDemo.ino:116:9: error: expected unqualified-id before '.' token
   BME280.inactiveTime(inactive1000ms);
         ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BME280_Zanshin/examples/I2CDemo/I2CDemo.ino:118:22: error: expected primary-expression before '.' token
   Serial.print(BME280.measurementTime(MaximumMeasure)/1000);
                      ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BME280_Zanshin/examples/I2CDemo/I2CDemo.ino:118:39: error: 'MaximumMeasure' was not declared in this scope
   Serial.print(BME280.measurementTime(MaximumMeasure)/1000);
                                       ^~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BME280_Zanshin/examples/I2CDemo/I2CDemo.ino: In function 'void loop()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BME280_Zanshin/examples/I2CDemo/I2CDemo.ino:131:9: error: expected unqualified-id before '.' token
   BME280.getSensorData(temperature,humidity,pressure); // Get most recent readings
         ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BME280_Zanshin/examples/I2CDemo/I2CDemo.ino:135:13: error: expected primary-expression before '.' token
   if (BME280.getOversampling(HumiditySensor)!=0)
             ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BME280_Zanshin/examples/I2CDemo/I2CDemo.ino:135:30: error: 'HumiditySensor' was not declared in this scope
   if (BME280.getOversampling(HumiditySensor)!=0)
                              ^~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BME280_Zanshin/examples/I2CDemo/I2CDemo.ino:135:30: note: suggested alternative: 'humidity'
   if (BME280.getOversampling(HumiditySensor)!=0)
                              ^~~~~~~~~~~~~~
                              humidity
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BME280_Zanshin/examples/I2CDemo/I2CDemo.ino:150:15: error: expected primary-expression before '.' token
     if (BME280.getOversampling(HumiditySensor)==0)
               ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BME280_Zanshin/examples/I2CDemo/I2CDemo.ino:150:32: error: 'HumiditySensor' was not declared in this scope
     if (BME280.getOversampling(HumiditySensor)==0)
                                ^~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BME280_Zanshin/examples/I2CDemo/I2CDemo.ino:150:32: note: suggested alternative: 'humidity'
     if (BME280.getOversampling(HumiditySensor)==0)
                                ^~~~~~~~~~~~~~
                                humidity
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BME280_Zanshin/examples/I2CDemo/I2CDemo.ino:152:13: error: expected unqualified-id before '.' token
       BME280.setOversampling(HumiditySensor,Oversample16); // Turn humidity sensing on
             ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BME280_Zanshin/examples/I2CDemo/I2CDemo.ino:156:13: error: expected unqualified-id before '.' token
       BME280.setOversampling(HumiditySensor,SensorOff);
             ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BME280_Zanshin/examples/I2CDemo/I2CDemo.ino:160:11: error: expected unqualified-id before '.' token
     BME280.setOversampling(HumiditySensor,SensorOff); // No longer interested in humidity
           ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BME280_Zanshin/examples/I2CDemo/I2CDemo.ino:162:24: error: expected primary-expression before '.' token
     Serial.print(BME280.measurementTime(MaximumMeasure)/1000.0); // returns microseconds
                        ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BME280_Zanshin/examples/I2CDemo/I2CDemo.ino:162:41: error: 'MaximumMeasure' was not declared in this scope
     Serial.print(BME280.measurementTime(MaximumMeasure)/1000.0); // returns microseconds
                                         ^~~~~~~~~~~~~~
Multiple libraries were found for "BME280.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BME280
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BME280_Zanshin

examples/SPIDemo

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BME280_Zanshin/examples/SPIDemo/SPIDemo.ino:66:1: error: 'BME280_Class' does not name a type; did you mean 'BME280'?
 BME280_Class   BME280; ///< Create an instance of the BME280 class
 ^~~~~~~~~~~~
 BME280
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BME280_Zanshin/examples/SPIDemo/SPIDemo.ino: In function 'float altitude(float)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BME280_Zanshin/examples/SPIDemo/SPIDemo.ino:79:9: error: expected unqualified-id before '.' token
   BME280.getSensorData(temp, hum, press); // Get the most recent values from the device
         ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BME280_Zanshin/examples/SPIDemo/SPIDemo.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BME280_Zanshin/examples/SPIDemo/SPIDemo.ino:99:17: error: expected primary-expression before '.' token
   while (!BME280.begin(SPI_CS_PIN))
                 ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BME280_Zanshin/examples/SPIDemo/SPIDemo.ino:104:9: error: expected unqualified-id before '.' token
   BME280.mode(SleepMode);
         ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BME280_Zanshin/examples/SPIDemo/SPIDemo.ino:106:22: error: expected primary-expression before '.' token
   Serial.print(BME280.mode());
                      ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BME280_Zanshin/examples/SPIDemo/SPIDemo.ino:108:12: error: expected primary-expression before '.' token
   if(BME280.mode()==0)
            ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BME280_Zanshin/examples/SPIDemo/SPIDemo.ino:111:24: error: expected primary-expression before '.' token
     Serial.print(BME280.mode(NormalMode));
                        ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BME280_Zanshin/examples/SPIDemo/SPIDemo.ino:111:30: error: 'NormalMode' was not declared in this scope
     Serial.print(BME280.mode(NormalMode));
                              ^~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BME280_Zanshin/examples/SPIDemo/SPIDemo.ino:115:9: error: expected unqualified-id before '.' token
   BME280.setOversampling(TemperatureSensor,Oversample16);
         ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BME280_Zanshin/examples/SPIDemo/SPIDemo.ino:116:9: error: expected unqualified-id before '.' token
   BME280.setOversampling(HumiditySensor,   Oversample16);
         ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BME280_Zanshin/examples/SPIDemo/SPIDemo.ino:117:9: error: expected unqualified-id before '.' token
   BME280.setOversampling(PressureSensor,   Oversample16);
         ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BME280_Zanshin/examples/SPIDemo/SPIDemo.ino:119:9: error: expected unqualified-id before '.' token
   BME280.iirFilter(IIR16); // Use enumerated type values
         ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BME280_Zanshin/examples/SPIDemo/SPIDemo.ino:121:9: error: expected unqualified-id before '.' token
   BME280.inactiveTime(inactive1000ms);
         ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BME280_Zanshin/examples/SPIDemo/SPIDemo.ino:123:22: error: expected primary-expression before '.' token
   Serial.print(BME280.measurementTime(MaximumMeasure)/1000); // returns microseconds
                      ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BME280_Zanshin/examples/SPIDemo/SPIDemo.ino:123:39: error: 'MaximumMeasure' was not declared in this scope
   Serial.print(BME280.measurementTime(MaximumMeasure)/1000); // returns microseconds
                                       ^~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BME280_Zanshin/examples/SPIDemo/SPIDemo.ino: In function 'void loop()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BME280_Zanshin/examples/SPIDemo/SPIDemo.ino:136:9: error: expected unqualified-id before '.' token
   BME280.getSensorData(temperature,humidity,pressure); // Get most recent readings
         ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BME280_Zanshin/examples/SPIDemo/SPIDemo.ino:140:13: error: expected primary-expression before '.' token
   if (BME280.getOversampling(HumiditySensor)!=0)
             ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BME280_Zanshin/examples/SPIDemo/SPIDemo.ino:140:30: error: 'HumiditySensor' was not declared in this scope
   if (BME280.getOversampling(HumiditySensor)!=0)
                              ^~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BME280_Zanshin/examples/SPIDemo/SPIDemo.ino:140:30: note: suggested alternative: 'humidity'
   if (BME280.getOversampling(HumiditySensor)!=0)
                              ^~~~~~~~~~~~~~
                              humidity
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BME280_Zanshin/examples/SPIDemo/SPIDemo.ino:155:15: error: expected primary-expression before '.' token
     if (BME280.getOversampling(HumiditySensor)==0)
               ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BME280_Zanshin/examples/SPIDemo/SPIDemo.ino:155:32: error: 'HumiditySensor' was not declared in this scope
     if (BME280.getOversampling(HumiditySensor)==0)
                                ^~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BME280_Zanshin/examples/SPIDemo/SPIDemo.ino:155:32: note: suggested alternative: 'humidity'
     if (BME280.getOversampling(HumiditySensor)==0)
                                ^~~~~~~~~~~~~~
                                humidity
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BME280_Zanshin/examples/SPIDemo/SPIDemo.ino:157:13: error: expected unqualified-id before '.' token
       BME280.setOversampling(HumiditySensor,Oversample16); // Turn humidity sensing on
             ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BME280_Zanshin/examples/SPIDemo/SPIDemo.ino:161:13: error: expected unqualified-id before '.' token
       BME280.setOversampling(HumiditySensor,SensorOff); // No longer interested in humidity
             ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BME280_Zanshin/examples/SPIDemo/SPIDemo.ino:166:24: error: expected primary-expression before '.' token
     Serial.print(BME280.measurementTime(MaximumMeasure)/1000.0); // returns microseconds
                        ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BME280_Zanshin/examples/SPIDemo/SPIDemo.ino:166:41: error: 'MaximumMeasure' was not declared in this scope
     Serial.print(BME280.measurementTime(MaximumMeasure)/1000.0); // returns microseconds
                                         ^~~~~~~~~~~~~~
Multiple libraries were found for "BME280.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BME280
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BME280_Zanshin

examples/SoftSPIDemo

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BME280_Zanshin/examples/SoftSPIDemo/SoftSPIDemo.ino:75:1: error: 'BME280_Class' does not name a type; did you mean 'BME280'?
 BME280_Class   BME280;   // Create an instance of the BME280 //
 ^~~~~~~~~~~~
 BME280
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BME280_Zanshin/examples/SoftSPIDemo/SoftSPIDemo.ino: In function 'float altitude(float)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BME280_Zanshin/examples/SoftSPIDemo/SoftSPIDemo.ino:88:9: error: expected unqualified-id before '.' token
   BME280.getSensorData(temp, hum, press); // Get the most recent values from the device
         ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BME280_Zanshin/examples/SoftSPIDemo/SoftSPIDemo.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BME280_Zanshin/examples/SoftSPIDemo/SoftSPIDemo.ino:108:17: error: expected primary-expression before '.' token
   while (!BME280.begin(SPI_CS_PIN,SPI_MOSI_PIN,SPI_MISO_PIN,SPI_SCK_PIN)) // Start using software SPI protocol//
                 ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BME280_Zanshin/examples/SoftSPIDemo/SoftSPIDemo.ino:113:9: error: expected unqualified-id before '.' token
   BME280.mode(SleepMode);
         ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BME280_Zanshin/examples/SoftSPIDemo/SoftSPIDemo.ino:115:22: error: expected primary-expression before '.' token
   Serial.print(BME280.mode());
                      ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BME280_Zanshin/examples/SoftSPIDemo/SoftSPIDemo.ino:117:12: error: expected primary-expression before '.' token
   if(BME280.mode()==0)
            ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BME280_Zanshin/examples/SoftSPIDemo/SoftSPIDemo.ino:120:24: error: expected primary-expression before '.' token
     Serial.print(BME280.mode(NormalMode));
                        ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BME280_Zanshin/examples/SoftSPIDemo/SoftSPIDemo.ino:120:30: error: 'NormalMode' was not declared in this scope
     Serial.print(BME280.mode(NormalMode));
                              ^~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BME280_Zanshin/examples/SoftSPIDemo/SoftSPIDemo.ino:124:9: error: expected unqualified-id before '.' token
   BME280.setOversampling(TemperatureSensor,Oversample16);
         ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BME280_Zanshin/examples/SoftSPIDemo/SoftSPIDemo.ino:125:9: error: expected unqualified-id before '.' token
   BME280.setOversampling(HumiditySensor,   Oversample16);
         ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BME280_Zanshin/examples/SoftSPIDemo/SoftSPIDemo.ino:126:9: error: expected unqualified-id before '.' token
   BME280.setOversampling(PressureSensor,   Oversample16);
         ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BME280_Zanshin/examples/SoftSPIDemo/SoftSPIDemo.ino:128:9: error: expected unqualified-id before '.' token
   BME280.iirFilter(IIR16);
         ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BME280_Zanshin/examples/SoftSPIDemo/SoftSPIDemo.ino:130:9: error: expected unqualified-id before '.' token
   BME280.inactiveTime(inactive1000ms);
         ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BME280_Zanshin/examples/SoftSPIDemo/SoftSPIDemo.ino:132:22: error: expected primary-expression before '.' token
   Serial.print(BME280.measurementTime(MaximumMeasure)/1000);
                      ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BME280_Zanshin/examples/SoftSPIDemo/SoftSPIDemo.ino:132:39: error: 'MaximumMeasure' was not declared in this scope
   Serial.print(BME280.measurementTime(MaximumMeasure)/1000);
                                       ^~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BME280_Zanshin/examples/SoftSPIDemo/SoftSPIDemo.ino: In function 'void loop()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BME280_Zanshin/examples/SoftSPIDemo/SoftSPIDemo.ino:145:9: error: expected unqualified-id before '.' token
   BME280.getSensorData(temperature,humidity,pressure); // Get most recent readings
         ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BME280_Zanshin/examples/SoftSPIDemo/SoftSPIDemo.ino:149:13: error: expected primary-expression before '.' token
   if (BME280.getOversampling(HumiditySensor)!=0)
             ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BME280_Zanshin/examples/SoftSPIDemo/SoftSPIDemo.ino:149:30: error: 'HumiditySensor' was not declared in this scope
   if (BME280.getOversampling(HumiditySensor)!=0)
                              ^~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BME280_Zanshin/examples/SoftSPIDemo/SoftSPIDemo.ino:149:30: note: suggested alternative: 'humidity'
   if (BME280.getOversampling(HumiditySensor)!=0)
                              ^~~~~~~~~~~~~~
                              humidity
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BME280_Zanshin/examples/SoftSPIDemo/SoftSPIDemo.ino:164:15: error: expected primary-expression before '.' token
     if (BME280.getOversampling(HumiditySensor)==0)
               ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BME280_Zanshin/examples/SoftSPIDemo/SoftSPIDemo.ino:164:32: error: 'HumiditySensor' was not declared in this scope
     if (BME280.getOversampling(HumiditySensor)==0)
                                ^~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BME280_Zanshin/examples/SoftSPIDemo/SoftSPIDemo.ino:164:32: note: suggested alternative: 'humidity'
     if (BME280.getOversampling(HumiditySensor)==0)
                                ^~~~~~~~~~~~~~
                                humidity
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BME280_Zanshin/examples/SoftSPIDemo/SoftSPIDemo.ino:166:13: error: expected unqualified-id before '.' token
       BME280.setOversampling(HumiditySensor,Oversample16);
             ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BME280_Zanshin/examples/SoftSPIDemo/SoftSPIDemo.ino:170:13: error: expected unqualified-id before '.' token
       BME280.setOversampling(HumiditySensor,SensorOff);
             ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BME280_Zanshin/examples/SoftSPIDemo/SoftSPIDemo.ino:175:24: error: expected primary-expression before '.' token
     Serial.print(BME280.measurementTime(MaximumMeasure)/1000.0); // returns microseconds
                        ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BME280_Zanshin/examples/SoftSPIDemo/SoftSPIDemo.ino:175:41: error: 'MaximumMeasure' was not declared in this scope
     Serial.print(BME280.measurementTime(MaximumMeasure)/1000.0); // returns microseconds
                                         ^~~~~~~~~~~~~~
Multiple libraries were found for "BME280.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BME280
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BME280_Zanshin

arduino:megaavr:nona4809 @ 1.8.7

Inclusion

Result: PASS

Sketch uses 5482 bytes (11%) of program storage space. Maximum is 49152 bytes.
Global variables use 335 bytes (5%) of dynamic memory, leaving 5809 bytes for local variables. Maximum is 6144 bytes.

examples/I2CDemo

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BME280_Zanshin/examples/I2CDemo/I2CDemo.ino:61:1: error: 'BME280_Class' does not name a type; did you mean 'BME280'?
 BME280_Class   BME280; ///< Create an instance of the BME280 class
 ^~~~~~~~~~~~
 BME280
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BME280_Zanshin/examples/I2CDemo/I2CDemo.ino: In function 'float altitude(float)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BME280_Zanshin/examples/I2CDemo/I2CDemo.ino:74:9: error: expected unqualified-id before '.' token
   BME280.getSensorData(temp, hum, press); // Get the most recent values from the device
         ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BME280_Zanshin/examples/I2CDemo/I2CDemo.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BME280_Zanshin/examples/I2CDemo/I2CDemo.ino:94:17: error: expected primary-expression before '.' token
   while (!BME280.begin(I2C_FAST_MODE_PLUS_MODE)) // Start BME280 using I2C protocol
                 ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BME280_Zanshin/examples/I2CDemo/I2CDemo.ino:94:24: error: 'I2C_FAST_MODE_PLUS_MODE' was not declared in this scope
   while (!BME280.begin(I2C_FAST_MODE_PLUS_MODE)) // Start BME280 using I2C protocol
                        ^~~~~~~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BME280_Zanshin/examples/I2CDemo/I2CDemo.ino:99:9: error: expected unqualified-id before '.' token
   BME280.mode(SleepMode);
         ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BME280_Zanshin/examples/I2CDemo/I2CDemo.ino:101:22: error: expected primary-expression before '.' token
   Serial.print(BME280.mode());
                      ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BME280_Zanshin/examples/I2CDemo/I2CDemo.ino:103:12: error: expected primary-expression before '.' token
   if(BME280.mode()==0)
            ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BME280_Zanshin/examples/I2CDemo/I2CDemo.ino:106:24: error: expected primary-expression before '.' token
     Serial.print(BME280.mode(NormalMode)); // Use enumerated type values
                        ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BME280_Zanshin/examples/I2CDemo/I2CDemo.ino:106:30: error: 'NormalMode' was not declared in this scope
     Serial.print(BME280.mode(NormalMode)); // Use enumerated type values
                              ^~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BME280_Zanshin/examples/I2CDemo/I2CDemo.ino:110:9: error: expected unqualified-id before '.' token
   BME280.setOversampling(TemperatureSensor,Oversample16);
         ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BME280_Zanshin/examples/I2CDemo/I2CDemo.ino:111:9: error: expected unqualified-id before '.' token
   BME280.setOversampling(HumiditySensor,   Oversample16);
         ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BME280_Zanshin/examples/I2CDemo/I2CDemo.ino:112:9: error: expected unqualified-id before '.' token
   BME280.setOversampling(PressureSensor,   Oversample16);
         ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BME280_Zanshin/examples/I2CDemo/I2CDemo.ino:114:9: error: expected unqualified-id before '.' token
   BME280.iirFilter(IIR16);
         ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BME280_Zanshin/examples/I2CDemo/I2CDemo.ino:116:9: error: expected unqualified-id before '.' token
   BME280.inactiveTime(inactive1000ms);
         ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BME280_Zanshin/examples/I2CDemo/I2CDemo.ino:118:22: error: expected primary-expression before '.' token
   Serial.print(BME280.measurementTime(MaximumMeasure)/1000);
                      ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BME280_Zanshin/examples/I2CDemo/I2CDemo.ino:118:39: error: 'MaximumMeasure' was not declared in this scope
   Serial.print(BME280.measurementTime(MaximumMeasure)/1000);
                                       ^~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BME280_Zanshin/examples/I2CDemo/I2CDemo.ino: In function 'void loop()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BME280_Zanshin/examples/I2CDemo/I2CDemo.ino:131:9: error: expected unqualified-id before '.' token
   BME280.getSensorData(temperature,humidity,pressure); // Get most recent readings
         ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BME280_Zanshin/examples/I2CDemo/I2CDemo.ino:135:13: error: expected primary-expression before '.' token
   if (BME280.getOversampling(HumiditySensor)!=0)
             ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BME280_Zanshin/examples/I2CDemo/I2CDemo.ino:135:30: error: 'HumiditySensor' was not declared in this scope
   if (BME280.getOversampling(HumiditySensor)!=0)
                              ^~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BME280_Zanshin/examples/I2CDemo/I2CDemo.ino:135:30: note: suggested alternative: 'humidity'
   if (BME280.getOversampling(HumiditySensor)!=0)
                              ^~~~~~~~~~~~~~
                              humidity
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BME280_Zanshin/examples/I2CDemo/I2CDemo.ino:150:15: error: expected primary-expression before '.' token
     if (BME280.getOversampling(HumiditySensor)==0)
               ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BME280_Zanshin/examples/I2CDemo/I2CDemo.ino:150:32: error: 'HumiditySensor' was not declared in this scope
     if (BME280.getOversampling(HumiditySensor)==0)
                                ^~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BME280_Zanshin/examples/I2CDemo/I2CDemo.ino:150:32: note: suggested alternative: 'humidity'
     if (BME280.getOversampling(HumiditySensor)==0)
                                ^~~~~~~~~~~~~~
                                humidity
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BME280_Zanshin/examples/I2CDemo/I2CDemo.ino:152:13: error: expected unqualified-id before '.' token
       BME280.setOversampling(HumiditySensor,Oversample16); // Turn humidity sensing on
             ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BME280_Zanshin/examples/I2CDemo/I2CDemo.ino:156:13: error: expected unqualified-id before '.' token
       BME280.setOversampling(HumiditySensor,SensorOff);
             ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BME280_Zanshin/examples/I2CDemo/I2CDemo.ino:160:11: error: expected unqualified-id before '.' token
     BME280.setOversampling(HumiditySensor,SensorOff); // No longer interested in humidity
           ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BME280_Zanshin/examples/I2CDemo/I2CDemo.ino:162:24: error: expected primary-expression before '.' token
     Serial.print(BME280.measurementTime(MaximumMeasure)/1000.0); // returns microseconds
                        ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BME280_Zanshin/examples/I2CDemo/I2CDemo.ino:162:41: error: 'MaximumMeasure' was not declared in this scope
     Serial.print(BME280.measurementTime(MaximumMeasure)/1000.0); // returns microseconds
                                         ^~~~~~~~~~~~~~
Multiple libraries were found for "BME280.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BME280
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BME280_Zanshin

examples/SPIDemo

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BME280_Zanshin/examples/SPIDemo/SPIDemo.ino:66:1: error: 'BME280_Class' does not name a type; did you mean 'BME280'?
 BME280_Class   BME280; ///< Create an instance of the BME280 class
 ^~~~~~~~~~~~
 BME280
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BME280_Zanshin/examples/SPIDemo/SPIDemo.ino: In function 'float altitude(float)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BME280_Zanshin/examples/SPIDemo/SPIDemo.ino:79:9: error: expected unqualified-id before '.' token
   BME280.getSensorData(temp, hum, press); // Get the most recent values from the device
         ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BME280_Zanshin/examples/SPIDemo/SPIDemo.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BME280_Zanshin/examples/SPIDemo/SPIDemo.ino:99:17: error: expected primary-expression before '.' token
   while (!BME280.begin(SPI_CS_PIN))
                 ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BME280_Zanshin/examples/SPIDemo/SPIDemo.ino:104:9: error: expected unqualified-id before '.' token
   BME280.mode(SleepMode);
         ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BME280_Zanshin/examples/SPIDemo/SPIDemo.ino:106:22: error: expected primary-expression before '.' token
   Serial.print(BME280.mode());
                      ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BME280_Zanshin/examples/SPIDemo/SPIDemo.ino:108:12: error: expected primary-expression before '.' token
   if(BME280.mode()==0)
            ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BME280_Zanshin/examples/SPIDemo/SPIDemo.ino:111:24: error: expected primary-expression before '.' token
     Serial.print(BME280.mode(NormalMode));
                        ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BME280_Zanshin/examples/SPIDemo/SPIDemo.ino:111:30: error: 'NormalMode' was not declared in this scope
     Serial.print(BME280.mode(NormalMode));
                              ^~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BME280_Zanshin/examples/SPIDemo/SPIDemo.ino:115:9: error: expected unqualified-id before '.' token
   BME280.setOversampling(TemperatureSensor,Oversample16);
         ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BME280_Zanshin/examples/SPIDemo/SPIDemo.ino:116:9: error: expected unqualified-id before '.' token
   BME280.setOversampling(HumiditySensor,   Oversample16);
         ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BME280_Zanshin/examples/SPIDemo/SPIDemo.ino:117:9: error: expected unqualified-id before '.' token
   BME280.setOversampling(PressureSensor,   Oversample16);
         ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BME280_Zanshin/examples/SPIDemo/SPIDemo.ino:119:9: error: expected unqualified-id before '.' token
   BME280.iirFilter(IIR16); // Use enumerated type values
         ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BME280_Zanshin/examples/SPIDemo/SPIDemo.ino:121:9: error: expected unqualified-id before '.' token
   BME280.inactiveTime(inactive1000ms);
         ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BME280_Zanshin/examples/SPIDemo/SPIDemo.ino:123:22: error: expected primary-expression before '.' token
   Serial.print(BME280.measurementTime(MaximumMeasure)/1000); // returns microseconds
                      ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BME280_Zanshin/examples/SPIDemo/SPIDemo.ino:123:39: error: 'MaximumMeasure' was not declared in this scope
   Serial.print(BME280.measurementTime(MaximumMeasure)/1000); // returns microseconds
                                       ^~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BME280_Zanshin/examples/SPIDemo/SPIDemo.ino: In function 'void loop()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BME280_Zanshin/examples/SPIDemo/SPIDemo.ino:136:9: error: expected unqualified-id before '.' token
   BME280.getSensorData(temperature,humidity,pressure); // Get most recent readings
         ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BME280_Zanshin/examples/SPIDemo/SPIDemo.ino:140:13: error: expected primary-expression before '.' token
   if (BME280.getOversampling(HumiditySensor)!=0)
             ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BME280_Zanshin/examples/SPIDemo/SPIDemo.ino:140:30: error: 'HumiditySensor' was not declared in this scope
   if (BME280.getOversampling(HumiditySensor)!=0)
                              ^~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BME280_Zanshin/examples/SPIDemo/SPIDemo.ino:140:30: note: suggested alternative: 'humidity'
   if (BME280.getOversampling(HumiditySensor)!=0)
                              ^~~~~~~~~~~~~~
                              humidity
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BME280_Zanshin/examples/SPIDemo/SPIDemo.ino:155:15: error: expected primary-expression before '.' token
     if (BME280.getOversampling(HumiditySensor)==0)
               ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BME280_Zanshin/examples/SPIDemo/SPIDemo.ino:155:32: error: 'HumiditySensor' was not declared in this scope
     if (BME280.getOversampling(HumiditySensor)==0)
                                ^~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BME280_Zanshin/examples/SPIDemo/SPIDemo.ino:155:32: note: suggested alternative: 'humidity'
     if (BME280.getOversampling(HumiditySensor)==0)
                                ^~~~~~~~~~~~~~
                                humidity
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BME280_Zanshin/examples/SPIDemo/SPIDemo.ino:157:13: error: expected unqualified-id before '.' token
       BME280.setOversampling(HumiditySensor,Oversample16); // Turn humidity sensing on
             ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BME280_Zanshin/examples/SPIDemo/SPIDemo.ino:161:13: error: expected unqualified-id before '.' token
       BME280.setOversampling(HumiditySensor,SensorOff); // No longer interested in humidity
             ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BME280_Zanshin/examples/SPIDemo/SPIDemo.ino:166:24: error: expected primary-expression before '.' token
     Serial.print(BME280.measurementTime(MaximumMeasure)/1000.0); // returns microseconds
                        ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BME280_Zanshin/examples/SPIDemo/SPIDemo.ino:166:41: error: 'MaximumMeasure' was not declared in this scope
     Serial.print(BME280.measurementTime(MaximumMeasure)/1000.0); // returns microseconds
                                         ^~~~~~~~~~~~~~
Multiple libraries were found for "BME280.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BME280
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BME280_Zanshin

examples/SoftSPIDemo

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BME280_Zanshin/examples/SoftSPIDemo/SoftSPIDemo.ino:75:1: error: 'BME280_Class' does not name a type; did you mean 'BME280'?
 BME280_Class   BME280;   // Create an instance of the BME280 //
 ^~~~~~~~~~~~
 BME280
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BME280_Zanshin/examples/SoftSPIDemo/SoftSPIDemo.ino: In function 'float altitude(float)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BME280_Zanshin/examples/SoftSPIDemo/SoftSPIDemo.ino:88:9: error: expected unqualified-id before '.' token
   BME280.getSensorData(temp, hum, press); // Get the most recent values from the device
         ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BME280_Zanshin/examples/SoftSPIDemo/SoftSPIDemo.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BME280_Zanshin/examples/SoftSPIDemo/SoftSPIDemo.ino:108:17: error: expected primary-expression before '.' token
   while (!BME280.begin(SPI_CS_PIN,SPI_MOSI_PIN,SPI_MISO_PIN,SPI_SCK_PIN)) // Start using software SPI protocol//
                 ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BME280_Zanshin/examples/SoftSPIDemo/SoftSPIDemo.ino:113:9: error: expected unqualified-id before '.' token
   BME280.mode(SleepMode);
         ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BME280_Zanshin/examples/SoftSPIDemo/SoftSPIDemo.ino:115:22: error: expected primary-expression before '.' token
   Serial.print(BME280.mode());
                      ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BME280_Zanshin/examples/SoftSPIDemo/SoftSPIDemo.ino:117:12: error: expected primary-expression before '.' token
   if(BME280.mode()==0)
            ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BME280_Zanshin/examples/SoftSPIDemo/SoftSPIDemo.ino:120:24: error: expected primary-expression before '.' token
     Serial.print(BME280.mode(NormalMode));
                        ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BME280_Zanshin/examples/SoftSPIDemo/SoftSPIDemo.ino:120:30: error: 'NormalMode' was not declared in this scope
     Serial.print(BME280.mode(NormalMode));
                              ^~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BME280_Zanshin/examples/SoftSPIDemo/SoftSPIDemo.ino:124:9: error: expected unqualified-id before '.' token
   BME280.setOversampling(TemperatureSensor,Oversample16);
         ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BME280_Zanshin/examples/SoftSPIDemo/SoftSPIDemo.ino:125:9: error: expected unqualified-id before '.' token
   BME280.setOversampling(HumiditySensor,   Oversample16);
         ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BME280_Zanshin/examples/SoftSPIDemo/SoftSPIDemo.ino:126:9: error: expected unqualified-id before '.' token
   BME280.setOversampling(PressureSensor,   Oversample16);
         ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BME280_Zanshin/examples/SoftSPIDemo/SoftSPIDemo.ino:128:9: error: expected unqualified-id before '.' token
   BME280.iirFilter(IIR16);
         ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BME280_Zanshin/examples/SoftSPIDemo/SoftSPIDemo.ino:130:9: error: expected unqualified-id before '.' token
   BME280.inactiveTime(inactive1000ms);
         ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BME280_Zanshin/examples/SoftSPIDemo/SoftSPIDemo.ino:132:22: error: expected primary-expression before '.' token
   Serial.print(BME280.measurementTime(MaximumMeasure)/1000);
                      ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BME280_Zanshin/examples/SoftSPIDemo/SoftSPIDemo.ino:132:39: error: 'MaximumMeasure' was not declared in this scope
   Serial.print(BME280.measurementTime(MaximumMeasure)/1000);
                                       ^~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BME280_Zanshin/examples/SoftSPIDemo/SoftSPIDemo.ino: In function 'void loop()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BME280_Zanshin/examples/SoftSPIDemo/SoftSPIDemo.ino:145:9: error: expected unqualified-id before '.' token
   BME280.getSensorData(temperature,humidity,pressure); // Get most recent readings
         ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BME280_Zanshin/examples/SoftSPIDemo/SoftSPIDemo.ino:149:13: error: expected primary-expression before '.' token
   if (BME280.getOversampling(HumiditySensor)!=0)
             ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BME280_Zanshin/examples/SoftSPIDemo/SoftSPIDemo.ino:149:30: error: 'HumiditySensor' was not declared in this scope
   if (BME280.getOversampling(HumiditySensor)!=0)
                              ^~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BME280_Zanshin/examples/SoftSPIDemo/SoftSPIDemo.ino:149:30: note: suggested alternative: 'humidity'
   if (BME280.getOversampling(HumiditySensor)!=0)
                              ^~~~~~~~~~~~~~
                              humidity
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BME280_Zanshin/examples/SoftSPIDemo/SoftSPIDemo.ino:164:15: error: expected primary-expression before '.' token
     if (BME280.getOversampling(HumiditySensor)==0)
               ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BME280_Zanshin/examples/SoftSPIDemo/SoftSPIDemo.ino:164:32: error: 'HumiditySensor' was not declared in this scope
     if (BME280.getOversampling(HumiditySensor)==0)
                                ^~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BME280_Zanshin/examples/SoftSPIDemo/SoftSPIDemo.ino:164:32: note: suggested alternative: 'humidity'
     if (BME280.getOversampling(HumiditySensor)==0)
                                ^~~~~~~~~~~~~~
                                humidity
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BME280_Zanshin/examples/SoftSPIDemo/SoftSPIDemo.ino:166:13: error: expected unqualified-id before '.' token
       BME280.setOversampling(HumiditySensor,Oversample16);
             ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BME280_Zanshin/examples/SoftSPIDemo/SoftSPIDemo.ino:170:13: error: expected unqualified-id before '.' token
       BME280.setOversampling(HumiditySensor,SensorOff);
             ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BME280_Zanshin/examples/SoftSPIDemo/SoftSPIDemo.ino:175:24: error: expected primary-expression before '.' token
     Serial.print(BME280.measurementTime(MaximumMeasure)/1000.0); // returns microseconds
                        ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BME280_Zanshin/examples/SoftSPIDemo/SoftSPIDemo.ino:175:41: error: 'MaximumMeasure' was not declared in this scope
     Serial.print(BME280.measurementTime(MaximumMeasure)/1000.0); // returns microseconds
                                         ^~~~~~~~~~~~~~
Multiple libraries were found for "BME280.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BME280
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BME280_Zanshin

arduino:samd:mkrwifi1010 @ 1.8.12

Inclusion

Result: PASS
This library has no main header file so an empty one was created.

Sketch uses 14780 bytes (5%) of program storage space. Maximum is 262144 bytes.
Global variables use 3656 bytes (11%) of dynamic memory, leaving 29112 bytes for local variables. Maximum is 32768 bytes.

examples/I2CDemo

Result: FAIL

/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BME280_Zanshin/examples/I2CDemo/I2CDemo.ino:61:1: error: 'BME280_Class' does not name a type; did you mean 'BME280'?
 BME280_Class   BME280; ///< Create an instance of the BME280 class
 ^~~~~~~~~~~~
 BME280
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BME280_Zanshin/examples/I2CDemo/I2CDemo.ino: In function 'float altitude(float)':
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BME280_Zanshin/examples/I2CDemo/I2CDemo.ino:74:9: error: expected unqualified-id before '.' token
   BME280.getSensorData(temp, hum, press); // Get the most recent values from the device
         ^
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BME280_Zanshin/examples/I2CDemo/I2CDemo.ino: In function 'void setup()':
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BME280_Zanshin/examples/I2CDemo/I2CDemo.ino:94:17: error: expected primary-expression before '.' token
   while (!BME280.begin(I2C_FAST_MODE_PLUS_MODE)) // Start BME280 using I2C protocol
                 ^
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BME280_Zanshin/examples/I2CDemo/I2CDemo.ino:94:24: error: 'I2C_FAST_MODE_PLUS_MODE' was not declared in this scope
   while (!BME280.begin(I2C_FAST_MODE_PLUS_MODE)) // Start BME280 using I2C protocol
                        ^~~~~~~~~~~~~~~~~~~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BME280_Zanshin/examples/I2CDemo/I2CDemo.ino:99:9: error: expected unqualified-id before '.' token
   BME280.mode(SleepMode);
         ^
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BME280_Zanshin/examples/I2CDemo/I2CDemo.ino:101:22: error: expected primary-expression before '.' token
   Serial.print(BME280.mode());
                      ^
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BME280_Zanshin/examples/I2CDemo/I2CDemo.ino:103:12: error: expected primary-expression before '.' token
   if(BME280.mode()==0)
            ^
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BME280_Zanshin/examples/I2CDemo/I2CDemo.ino:106:24: error: expected primary-expression before '.' token
     Serial.print(BME280.mode(NormalMode)); // Use enumerated type values
                        ^
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BME280_Zanshin/examples/I2CDemo/I2CDemo.ino:106:30: error: 'NormalMode' was not declared in this scope
     Serial.print(BME280.mode(NormalMode)); // Use enumerated type values
                              ^~~~~~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BME280_Zanshin/examples/I2CDemo/I2CDemo.ino:110:9: error: expected unqualified-id before '.' token
   BME280.setOversampling(TemperatureSensor,Oversample16);
         ^
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BME280_Zanshin/examples/I2CDemo/I2CDemo.ino:111:9: error: expected unqualified-id before '.' token
   BME280.setOversampling(HumiditySensor,   Oversample16);
         ^
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BME280_Zanshin/examples/I2CDemo/I2CDemo.ino:112:9: error: expected unqualified-id before '.' token
   BME280.setOversampling(PressureSensor,   Oversample16);
         ^
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BME280_Zanshin/examples/I2CDemo/I2CDemo.ino:114:9: error: expected unqualified-id before '.' token
   BME280.iirFilter(IIR16);
         ^
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BME280_Zanshin/examples/I2CDemo/I2CDemo.ino:116:9: error: expected unqualified-id before '.' token
   BME280.inactiveTime(inactive1000ms);
         ^
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BME280_Zanshin/examples/I2CDemo/I2CDemo.ino:118:22: error: expected primary-expression before '.' token
   Serial.print(BME280.measurementTime(MaximumMeasure)/1000);
                      ^
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BME280_Zanshin/examples/I2CDemo/I2CDemo.ino:118:39: error: 'MaximumMeasure' was not declared in this scope
   Serial.print(BME280.measurementTime(MaximumMeasure)/1000);
                                       ^~~~~~~~~~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BME280_Zanshin/examples/I2CDemo/I2CDemo.ino: In function 'void loop()':
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BME280_Zanshin/examples/I2CDemo/I2CDemo.ino:131:9: error: expected unqualified-id before '.' token
   BME280.getSensorData(temperature,humidity,pressure); // Get most recent readings
         ^
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BME280_Zanshin/examples/I2CDemo/I2CDemo.ino:135:13: error: expected primary-expression before '.' token
   if (BME280.getOversampling(HumiditySensor)!=0)
             ^
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BME280_Zanshin/examples/I2CDemo/I2CDemo.ino:135:30: error: 'HumiditySensor' was not declared in this scope
   if (BME280.getOversampling(HumiditySensor)!=0)
                              ^~~~~~~~~~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BME280_Zanshin/examples/I2CDemo/I2CDemo.ino:135:30: note: suggested alternative: 'humidity'
   if (BME280.getOversampling(HumiditySensor)!=0)
                              ^~~~~~~~~~~~~~
                              humidity
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BME280_Zanshin/examples/I2CDemo/I2CDemo.ino:150:15: error: expected primary-expression before '.' token
     if (BME280.getOversampling(HumiditySensor)==0)
               ^
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BME280_Zanshin/examples/I2CDemo/I2CDemo.ino:150:32: error: 'HumiditySensor' was not declared in this scope
     if (BME280.getOversampling(HumiditySensor)==0)
                                ^~~~~~~~~~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BME280_Zanshin/examples/I2CDemo/I2CDemo.ino:150:32: note: suggested alternative: 'humidity'
     if (BME280.getOversampling(HumiditySensor)==0)
                                ^~~~~~~~~~~~~~
                                humidity
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BME280_Zanshin/examples/I2CDemo/I2CDemo.ino:152:13: error: expected unqualified-id before '.' token
       BME280.setOversampling(HumiditySensor,Oversample16); // Turn humidity sensing on
             ^
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BME280_Zanshin/examples/I2CDemo/I2CDemo.ino:156:13: error: expected unqualified-id before '.' token
       BME280.setOversampling(HumiditySensor,SensorOff);
             ^
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BME280_Zanshin/examples/I2CDemo/I2CDemo.ino:160:11: error: expected unqualified-id before '.' token
     BME280.setOversampling(HumiditySensor,SensorOff); // No longer interested in humidity
           ^
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BME280_Zanshin/examples/I2CDemo/I2CDemo.ino:162:24: error: expected primary-expression before '.' token
     Serial.print(BME280.measurementTime(MaximumMeasure)/1000.0); // returns microseconds
                        ^
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BME280_Zanshin/examples/I2CDemo/I2CDemo.ino:162:41: error: 'MaximumMeasure' was not declared in this scope
     Serial.print(BME280.measurementTime(MaximumMeasure)/1000.0); // returns microseconds
                                         ^~~~~~~~~~~~~~
Multiple libraries were found for "BME280.h"
  Used: /Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BME280
  Not used: /Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BME280_Zanshin

examples/SPIDemo

Result: FAIL

/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BME280_Zanshin/examples/SPIDemo/SPIDemo.ino:66:1: error: 'BME280_Class' does not name a type; did you mean 'BME280'?
 BME280_Class   BME280; ///< Create an instance of the BME280 class
 ^~~~~~~~~~~~
 BME280
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BME280_Zanshin/examples/SPIDemo/SPIDemo.ino: In function 'float altitude(float)':
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BME280_Zanshin/examples/SPIDemo/SPIDemo.ino:79:9: error: expected unqualified-id before '.' token
   BME280.getSensorData(temp, hum, press); // Get the most recent values from the device
         ^
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BME280_Zanshin/examples/SPIDemo/SPIDemo.ino: In function 'void setup()':
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BME280_Zanshin/examples/SPIDemo/SPIDemo.ino:99:17: error: expected primary-expression before '.' token
   while (!BME280.begin(SPI_CS_PIN))
                 ^
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BME280_Zanshin/examples/SPIDemo/SPIDemo.ino:104:9: error: expected unqualified-id before '.' token
   BME280.mode(SleepMode);
         ^
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BME280_Zanshin/examples/SPIDemo/SPIDemo.ino:106:22: error: expected primary-expression before '.' token
   Serial.print(BME280.mode());
                      ^
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BME280_Zanshin/examples/SPIDemo/SPIDemo.ino:108:12: error: expected primary-expression before '.' token
   if(BME280.mode()==0)
            ^
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BME280_Zanshin/examples/SPIDemo/SPIDemo.ino:111:24: error: expected primary-expression before '.' token
     Serial.print(BME280.mode(NormalMode));
                        ^
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BME280_Zanshin/examples/SPIDemo/SPIDemo.ino:111:30: error: 'NormalMode' was not declared in this scope
     Serial.print(BME280.mode(NormalMode));
                              ^~~~~~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BME280_Zanshin/examples/SPIDemo/SPIDemo.ino:115:9: error: expected unqualified-id before '.' token
   BME280.setOversampling(TemperatureSensor,Oversample16);
         ^
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BME280_Zanshin/examples/SPIDemo/SPIDemo.ino:116:9: error: expected unqualified-id before '.' token
   BME280.setOversampling(HumiditySensor,   Oversample16);
         ^
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BME280_Zanshin/examples/SPIDemo/SPIDemo.ino:117:9: error: expected unqualified-id before '.' token
   BME280.setOversampling(PressureSensor,   Oversample16);
         ^
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BME280_Zanshin/examples/SPIDemo/SPIDemo.ino:119:9: error: expected unqualified-id before '.' token
   BME280.iirFilter(IIR16); // Use enumerated type values
         ^
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BME280_Zanshin/examples/SPIDemo/SPIDemo.ino:121:9: error: expected unqualified-id before '.' token
   BME280.inactiveTime(inactive1000ms);
         ^
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BME280_Zanshin/examples/SPIDemo/SPIDemo.ino:123:22: error: expected primary-expression before '.' token
   Serial.print(BME280.measurementTime(MaximumMeasure)/1000); // returns microseconds
                      ^
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BME280_Zanshin/examples/SPIDemo/SPIDemo.ino:123:39: error: 'MaximumMeasure' was not declared in this scope
   Serial.print(BME280.measurementTime(MaximumMeasure)/1000); // returns microseconds
                                       ^~~~~~~~~~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BME280_Zanshin/examples/SPIDemo/SPIDemo.ino: In function 'void loop()':
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BME280_Zanshin/examples/SPIDemo/SPIDemo.ino:136:9: error: expected unqualified-id before '.' token
   BME280.getSensorData(temperature,humidity,pressure); // Get most recent readings
         ^
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BME280_Zanshin/examples/SPIDemo/SPIDemo.ino:140:13: error: expected primary-expression before '.' token
   if (BME280.getOversampling(HumiditySensor)!=0)
             ^
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BME280_Zanshin/examples/SPIDemo/SPIDemo.ino:140:30: error: 'HumiditySensor' was not declared in this scope
   if (BME280.getOversampling(HumiditySensor)!=0)
                              ^~~~~~~~~~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BME280_Zanshin/examples/SPIDemo/SPIDemo.ino:140:30: note: suggested alternative: 'humidity'
   if (BME280.getOversampling(HumiditySensor)!=0)
                              ^~~~~~~~~~~~~~
                              humidity
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BME280_Zanshin/examples/SPIDemo/SPIDemo.ino:155:15: error: expected primary-expression before '.' token
     if (BME280.getOversampling(HumiditySensor)==0)
               ^
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BME280_Zanshin/examples/SPIDemo/SPIDemo.ino:155:32: error: 'HumiditySensor' was not declared in this scope
     if (BME280.getOversampling(HumiditySensor)==0)
                                ^~~~~~~~~~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BME280_Zanshin/examples/SPIDemo/SPIDemo.ino:155:32: note: suggested alternative: 'humidity'
     if (BME280.getOversampling(HumiditySensor)==0)
                                ^~~~~~~~~~~~~~
                                humidity
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BME280_Zanshin/examples/SPIDemo/SPIDemo.ino:157:13: error: expected unqualified-id before '.' token
       BME280.setOversampling(HumiditySensor,Oversample16); // Turn humidity sensing on
             ^
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BME280_Zanshin/examples/SPIDemo/SPIDemo.ino:161:13: error: expected unqualified-id before '.' token
       BME280.setOversampling(HumiditySensor,SensorOff); // No longer interested in humidity
             ^
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BME280_Zanshin/examples/SPIDemo/SPIDemo.ino:166:24: error: expected primary-expression before '.' token
     Serial.print(BME280.measurementTime(MaximumMeasure)/1000.0); // returns microseconds
                        ^
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BME280_Zanshin/examples/SPIDemo/SPIDemo.ino:166:41: error: 'MaximumMeasure' was not declared in this scope
     Serial.print(BME280.measurementTime(MaximumMeasure)/1000.0); // returns microseconds
                                         ^~~~~~~~~~~~~~
Multiple libraries were found for "BME280.h"
  Used: /Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BME280
  Not used: /Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BME280_Zanshin

examples/SoftSPIDemo

Result: FAIL

/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BME280_Zanshin/examples/SoftSPIDemo/SoftSPIDemo.ino:75:1: error: 'BME280_Class' does not name a type; did you mean 'BME280'?
 BME280_Class   BME280;   // Create an instance of the BME280 //
 ^~~~~~~~~~~~
 BME280
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BME280_Zanshin/examples/SoftSPIDemo/SoftSPIDemo.ino: In function 'float altitude(float)':
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BME280_Zanshin/examples/SoftSPIDemo/SoftSPIDemo.ino:88:9: error: expected unqualified-id before '.' token
   BME280.getSensorData(temp, hum, press); // Get the most recent values from the device
         ^
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BME280_Zanshin/examples/SoftSPIDemo/SoftSPIDemo.ino: In function 'void setup()':
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BME280_Zanshin/examples/SoftSPIDemo/SoftSPIDemo.ino:108:17: error: expected primary-expression before '.' token
   while (!BME280.begin(SPI_CS_PIN,SPI_MOSI_PIN,SPI_MISO_PIN,SPI_SCK_PIN)) // Start using software SPI protocol//
                 ^
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BME280_Zanshin/examples/SoftSPIDemo/SoftSPIDemo.ino:113:9: error: expected unqualified-id before '.' token
   BME280.mode(SleepMode);
         ^
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BME280_Zanshin/examples/SoftSPIDemo/SoftSPIDemo.ino:115:22: error: expected primary-expression before '.' token
   Serial.print(BME280.mode());
                      ^
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BME280_Zanshin/examples/SoftSPIDemo/SoftSPIDemo.ino:117:12: error: expected primary-expression before '.' token
   if(BME280.mode()==0)
            ^
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BME280_Zanshin/examples/SoftSPIDemo/SoftSPIDemo.ino:120:24: error: expected primary-expression before '.' token
     Serial.print(BME280.mode(NormalMode));
                        ^
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BME280_Zanshin/examples/SoftSPIDemo/SoftSPIDemo.ino:120:30: error: 'NormalMode' was not declared in this scope
     Serial.print(BME280.mode(NormalMode));
                              ^~~~~~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BME280_Zanshin/examples/SoftSPIDemo/SoftSPIDemo.ino:124:9: error: expected unqualified-id before '.' token
   BME280.setOversampling(TemperatureSensor,Oversample16);
         ^
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BME280_Zanshin/examples/SoftSPIDemo/SoftSPIDemo.ino:125:9: error: expected unqualified-id before '.' token
   BME280.setOversampling(HumiditySensor,   Oversample16);
         ^
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BME280_Zanshin/examples/SoftSPIDemo/SoftSPIDemo.ino:126:9: error: expected unqualified-id before '.' token
   BME280.setOversampling(PressureSensor,   Oversample16);
         ^
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BME280_Zanshin/examples/SoftSPIDemo/SoftSPIDemo.ino:128:9: error: expected unqualified-id before '.' token
   BME280.iirFilter(IIR16);
         ^
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BME280_Zanshin/examples/SoftSPIDemo/SoftSPIDemo.ino:130:9: error: expected unqualified-id before '.' token
   BME280.inactiveTime(inactive1000ms);
         ^
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BME280_Zanshin/examples/SoftSPIDemo/SoftSPIDemo.ino:132:22: error: expected primary-expression before '.' token
   Serial.print(BME280.measurementTime(MaximumMeasure)/1000);
                      ^
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BME280_Zanshin/examples/SoftSPIDemo/SoftSPIDemo.ino:132:39: error: 'MaximumMeasure' was not declared in this scope
   Serial.print(BME280.measurementTime(MaximumMeasure)/1000);
                                       ^~~~~~~~~~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BME280_Zanshin/examples/SoftSPIDemo/SoftSPIDemo.ino: In function 'void loop()':
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BME280_Zanshin/examples/SoftSPIDemo/SoftSPIDemo.ino:145:9: error: expected unqualified-id before '.' token
   BME280.getSensorData(temperature,humidity,pressure); // Get most recent readings
         ^
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BME280_Zanshin/examples/SoftSPIDemo/SoftSPIDemo.ino:149:13: error: expected primary-expression before '.' token
   if (BME280.getOversampling(HumiditySensor)!=0)
             ^
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BME280_Zanshin/examples/SoftSPIDemo/SoftSPIDemo.ino:149:30: error: 'HumiditySensor' was not declared in this scope
   if (BME280.getOversampling(HumiditySensor)!=0)
                              ^~~~~~~~~~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BME280_Zanshin/examples/SoftSPIDemo/SoftSPIDemo.ino:149:30: note: suggested alternative: 'humidity'
   if (BME280.getOversampling(HumiditySensor)!=0)
                              ^~~~~~~~~~~~~~
                              humidity
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BME280_Zanshin/examples/SoftSPIDemo/SoftSPIDemo.ino:164:15: error: expected primary-expression before '.' token
     if (BME280.getOversampling(HumiditySensor)==0)
               ^
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BME280_Zanshin/examples/SoftSPIDemo/SoftSPIDemo.ino:164:32: error: 'HumiditySensor' was not declared in this scope
     if (BME280.getOversampling(HumiditySensor)==0)
                                ^~~~~~~~~~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BME280_Zanshin/examples/SoftSPIDemo/SoftSPIDemo.ino:164:32: note: suggested alternative: 'humidity'
     if (BME280.getOversampling(HumiditySensor)==0)
                                ^~~~~~~~~~~~~~
                                humidity
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BME280_Zanshin/examples/SoftSPIDemo/SoftSPIDemo.ino:166:13: error: expected unqualified-id before '.' token
       BME280.setOversampling(HumiditySensor,Oversample16);
             ^
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BME280_Zanshin/examples/SoftSPIDemo/SoftSPIDemo.ino:170:13: error: expected unqualified-id before '.' token
       BME280.setOversampling(HumiditySensor,SensorOff);
             ^
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BME280_Zanshin/examples/SoftSPIDemo/SoftSPIDemo.ino:175:24: error: expected primary-expression before '.' token
     Serial.print(BME280.measurementTime(MaximumMeasure)/1000.0); // returns microseconds
                        ^
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BME280_Zanshin/examples/SoftSPIDemo/SoftSPIDemo.ino:175:41: error: 'MaximumMeasure' was not declared in this scope
     Serial.print(BME280.measurementTime(MaximumMeasure)/1000.0); // returns microseconds
                                         ^~~~~~~~~~~~~~
Multiple libraries were found for "BME280.h"
  Used: /Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BME280
  Not used: /Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BME280_Zanshin

esp32:esp32:d1_mini32 @ 1.0.6

Inclusion

Result: PASS

Sketch uses 203554 bytes (15%) of program storage space. Maximum is 1310720 bytes.
Global variables use 13912 bytes (4%) of dynamic memory, leaving 313768 bytes for local variables. Maximum is 327680 bytes.

examples/I2CDemo

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BME280_Zanshin/examples/I2CDemo/I2CDemo.ino:61:1: error: 'BME280_Class' does not name a type
 BME280_Class   BME280; ///< Create an instance of the BME280 class
 ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BME280_Zanshin/examples/I2CDemo/I2CDemo.ino: In function 'float altitude(float)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BME280_Zanshin/examples/I2CDemo/I2CDemo.ino:74:9: error: expected unqualified-id before '.' token
   BME280.getSensorData(temp, hum, press); // Get the most recent values from the device
         ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BME280_Zanshin/examples/I2CDemo/I2CDemo.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BME280_Zanshin/examples/I2CDemo/I2CDemo.ino:94:17: error: expected primary-expression before '.' token
   while (!BME280.begin(I2C_FAST_MODE_PLUS_MODE)) // Start BME280 using I2C protocol
                 ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BME280_Zanshin/examples/I2CDemo/I2CDemo.ino:94:24: error: 'I2C_FAST_MODE_PLUS_MODE' was not declared in this scope
   while (!BME280.begin(I2C_FAST_MODE_PLUS_MODE)) // Start BME280 using I2C protocol
                        ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BME280_Zanshin/examples/I2CDemo/I2CDemo.ino:99:9: error: expected unqualified-id before '.' token
   BME280.mode(SleepMode);
         ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BME280_Zanshin/examples/I2CDemo/I2CDemo.ino:101:22: error: expected primary-expression before '.' token
   Serial.print(BME280.mode());
                      ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BME280_Zanshin/examples/I2CDemo/I2CDemo.ino:103:12: error: expected primary-expression before '.' token
   if(BME280.mode()==0) 
            ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BME280_Zanshin/examples/I2CDemo/I2CDemo.ino:106:24: error: expected primary-expression before '.' token
     Serial.print(BME280.mode(NormalMode)); // Use enumerated type values
                        ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BME280_Zanshin/examples/I2CDemo/I2CDemo.ino:106:30: error: 'NormalMode' was not declared in this scope
     Serial.print(BME280.mode(NormalMode)); // Use enumerated type values
                              ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BME280_Zanshin/examples/I2CDemo/I2CDemo.ino:110:9: error: expected unqualified-id before '.' token
   BME280.setOversampling(TemperatureSensor,Oversample16);
         ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BME280_Zanshin/examples/I2CDemo/I2CDemo.ino:111:9: error: expected unqualified-id before '.' token
   BME280.setOversampling(HumiditySensor,   Oversample16);
         ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BME280_Zanshin/examples/I2CDemo/I2CDemo.ino:112:9: error: expected unqualified-id before '.' token
   BME280.setOversampling(PressureSensor,   Oversample16);
         ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BME280_Zanshin/examples/I2CDemo/I2CDemo.ino:114:9: error: expected unqualified-id before '.' token
   BME280.iirFilter(IIR16);
         ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BME280_Zanshin/examples/I2CDemo/I2CDemo.ino:116:9: error: expected unqualified-id before '.' token
   BME280.inactiveTime(inactive1000ms);
         ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BME280_Zanshin/examples/I2CDemo/I2CDemo.ino:118:22: error: expected primary-expression before '.' token
   Serial.print(BME280.measurementTime(MaximumMeasure)/1000);
                      ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BME280_Zanshin/examples/I2CDemo/I2CDemo.ino:118:39: error: 'MaximumMeasure' was not declared in this scope
   Serial.print(BME280.measurementTime(MaximumMeasure)/1000);
                                       ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BME280_Zanshin/examples/I2CDemo/I2CDemo.ino: In function 'void loop()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BME280_Zanshin/examples/I2CDemo/I2CDemo.ino:131:9: error: expected unqualified-id before '.' token
   BME280.getSensorData(temperature,humidity,pressure); // Get most recent readings
         ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BME280_Zanshin/examples/I2CDemo/I2CDemo.ino:135:13: error: expected primary-expression before '.' token
   if (BME280.getOversampling(HumiditySensor)!=0) 
             ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BME280_Zanshin/examples/I2CDemo/I2CDemo.ino:135:30: error: 'HumiditySensor' was not declared in this scope
   if (BME280.getOversampling(HumiditySensor)!=0) 
                              ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BME280_Zanshin/examples/I2CDemo/I2CDemo.ino:150:15: error: expected primary-expression before '.' token
     if (BME280.getOversampling(HumiditySensor)==0)
               ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BME280_Zanshin/examples/I2CDemo/I2CDemo.ino:150:32: error: 'HumiditySensor' was not declared in this scope
     if (BME280.getOversampling(HumiditySensor)==0)
                                ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BME280_Zanshin/examples/I2CDemo/I2CDemo.ino:152:13: error: expected unqualified-id before '.' token
       BME280.setOversampling(HumiditySensor,Oversample16); // Turn humidity sensing on
             ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BME280_Zanshin/examples/I2CDemo/I2CDemo.ino:156:13: error: expected unqualified-id before '.' token
       BME280.setOversampling(HumiditySensor,SensorOff);
             ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BME280_Zanshin/examples/I2CDemo/I2CDemo.ino:160:11: error: expected unqualified-id before '.' token
     BME280.setOversampling(HumiditySensor,SensorOff); // No longer interested in humidity
           ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BME280_Zanshin/examples/I2CDemo/I2CDemo.ino:162:24: error: expected primary-expression before '.' token
     Serial.print(BME280.measurementTime(MaximumMeasure)/1000.0); // returns microseconds
                        ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BME280_Zanshin/examples/I2CDemo/I2CDemo.ino:162:41: error: 'MaximumMeasure' was not declared in this scope
     Serial.print(BME280.measurementTime(MaximumMeasure)/1000.0); // returns microseconds
                                         ^
Multiple libraries were found for "BME280.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BME280
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BME280_Zanshin

examples/SPIDemo

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BME280_Zanshin/examples/SPIDemo/SPIDemo.ino:66:1: error: 'BME280_Class' does not name a type
 BME280_Class   BME280; ///< Create an instance of the BME280 class
 ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BME280_Zanshin/examples/SPIDemo/SPIDemo.ino: In function 'float altitude(float)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BME280_Zanshin/examples/SPIDemo/SPIDemo.ino:79:9: error: expected unqualified-id before '.' token
   BME280.getSensorData(temp, hum, press); // Get the most recent values from the device
         ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BME280_Zanshin/examples/SPIDemo/SPIDemo.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BME280_Zanshin/examples/SPIDemo/SPIDemo.ino:99:17: error: expected primary-expression before '.' token
   while (!BME280.begin(SPI_CS_PIN))
                 ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BME280_Zanshin/examples/SPIDemo/SPIDemo.ino:104:9: error: expected unqualified-id before '.' token
   BME280.mode(SleepMode);
         ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BME280_Zanshin/examples/SPIDemo/SPIDemo.ino:106:22: error: expected primary-expression before '.' token
   Serial.print(BME280.mode());
                      ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BME280_Zanshin/examples/SPIDemo/SPIDemo.ino:108:12: error: expected primary-expression before '.' token
   if(BME280.mode()==0) 
            ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BME280_Zanshin/examples/SPIDemo/SPIDemo.ino:111:24: error: expected primary-expression before '.' token
     Serial.print(BME280.mode(NormalMode));
                        ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BME280_Zanshin/examples/SPIDemo/SPIDemo.ino:111:30: error: 'NormalMode' was not declared in this scope
     Serial.print(BME280.mode(NormalMode));
                              ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BME280_Zanshin/examples/SPIDemo/SPIDemo.ino:115:9: error: expected unqualified-id before '.' token
   BME280.setOversampling(TemperatureSensor,Oversample16);
         ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BME280_Zanshin/examples/SPIDemo/SPIDemo.ino:116:9: error: expected unqualified-id before '.' token
   BME280.setOversampling(HumiditySensor,   Oversample16);
         ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BME280_Zanshin/examples/SPIDemo/SPIDemo.ino:117:9: error: expected unqualified-id before '.' token
   BME280.setOversampling(PressureSensor,   Oversample16);
         ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BME280_Zanshin/examples/SPIDemo/SPIDemo.ino:119:9: error: expected unqualified-id before '.' token
   BME280.iirFilter(IIR16); // Use enumerated type values
         ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BME280_Zanshin/examples/SPIDemo/SPIDemo.ino:121:9: error: expected unqualified-id before '.' token
   BME280.inactiveTime(inactive1000ms);
         ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BME280_Zanshin/examples/SPIDemo/SPIDemo.ino:123:22: error: expected primary-expression before '.' token
   Serial.print(BME280.measurementTime(MaximumMeasure)/1000); // returns microseconds
                      ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BME280_Zanshin/examples/SPIDemo/SPIDemo.ino:123:39: error: 'MaximumMeasure' was not declared in this scope
   Serial.print(BME280.measurementTime(MaximumMeasure)/1000); // returns microseconds
                                       ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BME280_Zanshin/examples/SPIDemo/SPIDemo.ino: In function 'void loop()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BME280_Zanshin/examples/SPIDemo/SPIDemo.ino:136:9: error: expected unqualified-id before '.' token
   BME280.getSensorData(temperature,humidity,pressure); // Get most recent readings
         ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BME280_Zanshin/examples/SPIDemo/SPIDemo.ino:140:13: error: expected primary-expression before '.' token
   if (BME280.getOversampling(HumiditySensor)!=0)
             ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BME280_Zanshin/examples/SPIDemo/SPIDemo.ino:140:30: error: 'HumiditySensor' was not declared in this scope
   if (BME280.getOversampling(HumiditySensor)!=0)
                              ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BME280_Zanshin/examples/SPIDemo/SPIDemo.ino:155:15: error: expected primary-expression before '.' token
     if (BME280.getOversampling(HumiditySensor)==0)
               ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BME280_Zanshin/examples/SPIDemo/SPIDemo.ino:155:32: error: 'HumiditySensor' was not declared in this scope
     if (BME280.getOversampling(HumiditySensor)==0)
                                ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BME280_Zanshin/examples/SPIDemo/SPIDemo.ino:157:13: error: expected unqualified-id before '.' token
       BME280.setOversampling(HumiditySensor,Oversample16); // Turn humidity sensing on
             ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BME280_Zanshin/examples/SPIDemo/SPIDemo.ino:161:13: error: expected unqualified-id before '.' token
       BME280.setOversampling(HumiditySensor,SensorOff); // No longer interested in humidity
             ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BME280_Zanshin/examples/SPIDemo/SPIDemo.ino:166:24: error: expected primary-expression before '.' token
     Serial.print(BME280.measurementTime(MaximumMeasure)/1000.0); // returns microseconds
                        ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BME280_Zanshin/examples/SPIDemo/SPIDemo.ino:166:41: error: 'MaximumMeasure' was not declared in this scope
     Serial.print(BME280.measurementTime(MaximumMeasure)/1000.0); // returns microseconds
                                         ^
Multiple libraries were found for "BME280.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BME280
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BME280_Zanshin

examples/SoftSPIDemo

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BME280_Zanshin/examples/SoftSPIDemo/SoftSPIDemo.ino:75:1: error: 'BME280_Class' does not name a type
 BME280_Class   BME280;   // Create an instance of the BME280 //
 ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BME280_Zanshin/examples/SoftSPIDemo/SoftSPIDemo.ino: In function 'float altitude(float)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BME280_Zanshin/examples/SoftSPIDemo/SoftSPIDemo.ino:88:9: error: expected unqualified-id before '.' token
   BME280.getSensorData(temp, hum, press); // Get the most recent values from the device
         ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BME280_Zanshin/examples/SoftSPIDemo/SoftSPIDemo.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BME280_Zanshin/examples/SoftSPIDemo/SoftSPIDemo.ino:108:17: error: expected primary-expression before '.' token
   while (!BME280.begin(SPI_CS_PIN,SPI_MOSI_PIN,SPI_MISO_PIN,SPI_SCK_PIN)) // Start using software SPI protocol//
                 ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BME280_Zanshin/examples/SoftSPIDemo/SoftSPIDemo.ino:113:9: error: expected unqualified-id before '.' token
   BME280.mode(SleepMode);
         ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BME280_Zanshin/examples/SoftSPIDemo/SoftSPIDemo.ino:115:22: error: expected primary-expression before '.' token
   Serial.print(BME280.mode());
                      ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BME280_Zanshin/examples/SoftSPIDemo/SoftSPIDemo.ino:117:12: error: expected primary-expression before '.' token
   if(BME280.mode()==0) 
            ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BME280_Zanshin/examples/SoftSPIDemo/SoftSPIDemo.ino:120:24: error: expected primary-expression before '.' token
     Serial.print(BME280.mode(NormalMode));
                        ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BME280_Zanshin/examples/SoftSPIDemo/SoftSPIDemo.ino:120:30: error: 'NormalMode' was not declared in this scope
     Serial.print(BME280.mode(NormalMode));
                              ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BME280_Zanshin/examples/SoftSPIDemo/SoftSPIDemo.ino:124:9: error: expected unqualified-id before '.' token
   BME280.setOversampling(TemperatureSensor,Oversample16);
         ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BME280_Zanshin/examples/SoftSPIDemo/SoftSPIDemo.ino:125:9: error: expected unqualified-id before '.' token
   BME280.setOversampling(HumiditySensor,   Oversample16);
         ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BME280_Zanshin/examples/SoftSPIDemo/SoftSPIDemo.ino:126:9: error: expected unqualified-id before '.' token
   BME280.setOversampling(PressureSensor,   Oversample16);
         ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BME280_Zanshin/examples/SoftSPIDemo/SoftSPIDemo.ino:128:9: error: expected unqualified-id before '.' token
   BME280.iirFilter(IIR16);
         ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BME280_Zanshin/examples/SoftSPIDemo/SoftSPIDemo.ino:130:9: error: expected unqualified-id before '.' token
   BME280.inactiveTime(inactive1000ms);
         ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BME280_Zanshin/examples/SoftSPIDemo/SoftSPIDemo.ino:132:22: error: expected primary-expression before '.' token
   Serial.print(BME280.measurementTime(MaximumMeasure)/1000);
                      ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BME280_Zanshin/examples/SoftSPIDemo/SoftSPIDemo.ino:132:39: error: 'MaximumMeasure' was not declared in this scope
   Serial.print(BME280.measurementTime(MaximumMeasure)/1000);
                                       ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BME280_Zanshin/examples/SoftSPIDemo/SoftSPIDemo.ino: In function 'void loop()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BME280_Zanshin/examples/SoftSPIDemo/SoftSPIDemo.ino:145:9: error: expected unqualified-id before '.' token
   BME280.getSensorData(temperature,humidity,pressure); // Get most recent readings
         ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BME280_Zanshin/examples/SoftSPIDemo/SoftSPIDemo.ino:149:13: error: expected primary-expression before '.' token
   if (BME280.getOversampling(HumiditySensor)!=0)
             ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BME280_Zanshin/examples/SoftSPIDemo/SoftSPIDemo.ino:149:30: error: 'HumiditySensor' was not declared in this scope
   if (BME280.getOversampling(HumiditySensor)!=0)
                              ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BME280_Zanshin/examples/SoftSPIDemo/SoftSPIDemo.ino:164:15: error: expected primary-expression before '.' token
     if (BME280.getOversampling(HumiditySensor)==0)
               ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BME280_Zanshin/examples/SoftSPIDemo/SoftSPIDemo.ino:164:32: error: 'HumiditySensor' was not declared in this scope
     if (BME280.getOversampling(HumiditySensor)==0)
                                ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BME280_Zanshin/examples/SoftSPIDemo/SoftSPIDemo.ino:166:13: error: expected unqualified-id before '.' token
       BME280.setOversampling(HumiditySensor,Oversample16);
             ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BME280_Zanshin/examples/SoftSPIDemo/SoftSPIDemo.ino:170:13: error: expected unqualified-id before '.' token
       BME280.setOversampling(HumiditySensor,SensorOff);
             ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BME280_Zanshin/examples/SoftSPIDemo/SoftSPIDemo.ino:175:24: error: expected primary-expression before '.' token
     Serial.print(BME280.measurementTime(MaximumMeasure)/1000.0); // returns microseconds
                        ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BME280_Zanshin/examples/SoftSPIDemo/SoftSPIDemo.ino:175:41: error: 'MaximumMeasure' was not declared in this scope
     Serial.print(BME280.measurementTime(MaximumMeasure)/1000.0); // returns microseconds
                                         ^
Multiple libraries were found for "BME280.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BME280
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BME280_Zanshin