This report was generated on Wednesday, 23-Feb-22 22:48:15 CET using arduino-testlib.
Version: 1.0.18
More details
| Board | Claims compatibility | Inclusion | BMP280_ESP32_HSPI_Normal |
BMP280_I2C_Alt_Normal |
BMP280_SPI_Forced |
BMP280_SPI_Normal |
BMP280_ESP32_I2C_Normal_DefinedPins |
BMP280_ESP8266_I2C_Normal_DefinedPins |
BMP280_I2C_Forced |
BMP280_I2C_Normal |
BMP280_SPI_Normal_Multiple |
|---|---|---|---|---|---|---|---|---|---|---|---|
|
arduino:avr:uno
1.8.4 |
Yes | PASS | FAIL | PASS | PASS | PASS | FAIL | FAIL | PASS | PASS | PASS |
|
arduino:mbed_nano:nanorp2040connect
2.7.2 |
Yes | PASS | FAIL | PASS | PASS | PASS | FAIL | FAIL | PASS | PASS | PASS |
|
arduino:megaavr:nona4809
1.8.7 |
Yes | PASS | FAIL | PASS | PASS | PASS | FAIL | FAIL | PASS | PASS | PASS |
|
arduino:samd:mkrwifi1010
1.8.12 |
Yes | PASS | FAIL | PASS | PASS | PASS | FAIL | FAIL | PASS | PASS | PASS |
|
esp32:esp32:d1_mini32
1.0.6 |
Yes | PASS | PASS | PASS | PASS | PASS | PASS | PASS | PASS | PASS | PASS |
Result: PASS
Sketch uses 1636 bytes (5%) of program storage space. Maximum is 32256 bytes. Global variables use 122 bytes (5%) of dynamic memory, leaving 1926 bytes for local variables. Maximum is 2048 bytes.
Result: FAIL
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BMP280_DEV/examples/BMP280_ESP32_HSPI_Normal/BMP280_ESP32_HSPI_Normal.ino:9:15: error: 'HSPI' was not declared in this scope
SPIClass SPI1(HSPI); // Create (instantiate) the SPI1 object for HSPI operation
^~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BMP280_DEV/examples/BMP280_ESP32_HSPI_Normal/BMP280_ESP32_HSPI_Normal.ino:9:15: note: suggested alternative: 'SPI'
SPIClass SPI1(HSPI); // Create (instantiate) the SPI1 object for HSPI operation
^~~~
SPI
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BMP280_DEV/examples/BMP280_ESP32_HSPI_Normal/BMP280_ESP32_HSPI_Normal.ino:10:23: error: 'HSPI' was not declared in this scope
BMP280_DEV bmp280(21, HSPI, SPI1); // Create BMP280_DEV object and set-up for HSPI operation, SCK 14, MOSI 13, MISO 27, SS 21
^~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BMP280_DEV/examples/BMP280_ESP32_HSPI_Normal/BMP280_ESP32_HSPI_Normal.ino:10:23: note: suggested alternative: 'SPI'
BMP280_DEV bmp280(21, HSPI, SPI1); // Create BMP280_DEV object and set-up for HSPI operation, SCK 14, MOSI 13, MISO 27, SS 21
^~~~
SPI
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BMP280_DEV/examples/BMP280_ESP32_HSPI_Normal/BMP280_ESP32_HSPI_Normal.ino: In function 'void setup()':
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BMP280_DEV/examples/BMP280_ESP32_HSPI_Normal/BMP280_ESP32_HSPI_Normal.ino:19:3: error: 'xTaskCreatePinnedToCore' was not declared in this scope
xTaskCreatePinnedToCore( // Kick-off "TaskOne" pinned to core 1
^~~~~~~~~~~~~~~~~~~~~~~
Result: FAIL
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BMP280_DEV/examples/BMP280_ESP32_I2C_Normal_DefinedPins/BMP280_ESP32_I2C_Normal_DefinedPins.ino:8:25: error: no matching function for call to 'BMP280_DEV::BMP280_DEV(const uint8_t&, const uint8_t&)'
BMP280_DEV bmp280(A6, A7); // Instantiate (create) a BMP280 object and set-up for I2C operation on pins SDA: A6, SCL: A7
^
In file included from /Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BMP280_DEV/examples/BMP280_ESP32_I2C_Normal_DefinedPins/BMP280_ESP32_I2C_Normal_DefinedPins.ino:5:0:
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BMP280_DEV/BMP280_DEV.h:130:3: note: candidate: BMP280_DEV::BMP280_DEV(uint8_t)
BMP280_DEV(uint8_t cs); // BMP280_DEV object for SPI operation
^~~~~~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BMP280_DEV/BMP280_DEV.h:130:3: note: candidate expects 1 argument, 2 provided
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BMP280_DEV/BMP280_DEV.h:126:3: note: candidate: BMP280_DEV::BMP280_DEV()
BMP280_DEV(); // BMP280_DEV object for I2C operation
^~~~~~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BMP280_DEV/BMP280_DEV.h:126:3: note: candidate expects 0 arguments, 2 provided
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BMP280_DEV/BMP280_DEV.h:124:7: note: candidate: constexpr BMP280_DEV::BMP280_DEV(const BMP280_DEV&)
class BMP280_DEV : public Device { // Derive the BMP280_DEV class from the Device class
^~~~~~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BMP280_DEV/BMP280_DEV.h:124:7: note: candidate expects 1 argument, 2 provided
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BMP280_DEV/BMP280_DEV.h:124:7: note: candidate: constexpr BMP280_DEV::BMP280_DEV(BMP280_DEV&&)
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BMP280_DEV/BMP280_DEV.h:124:7: note: candidate expects 1 argument, 2 provided
Result: FAIL
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BMP280_DEV/examples/BMP280_ESP8266_I2C_Normal_DefinedPins/BMP280_ESP8266_I2C_Normal_DefinedPins.ino:8:23: error: no matching function for call to 'BMP280_DEV::BMP280_DEV(int, int)'
BMP280_DEV bmp280(6, 7); // Instantiate (create) a BMP280 object and set-up for I2C operation on pins SDA: 6, SCL: 7
^
In file included from /Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BMP280_DEV/examples/BMP280_ESP8266_I2C_Normal_DefinedPins/BMP280_ESP8266_I2C_Normal_DefinedPins.ino:5:0:
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BMP280_DEV/BMP280_DEV.h:130:3: note: candidate: BMP280_DEV::BMP280_DEV(uint8_t)
BMP280_DEV(uint8_t cs); // BMP280_DEV object for SPI operation
^~~~~~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BMP280_DEV/BMP280_DEV.h:130:3: note: candidate expects 1 argument, 2 provided
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BMP280_DEV/BMP280_DEV.h:126:3: note: candidate: BMP280_DEV::BMP280_DEV()
BMP280_DEV(); // BMP280_DEV object for I2C operation
^~~~~~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BMP280_DEV/BMP280_DEV.h:126:3: note: candidate expects 0 arguments, 2 provided
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BMP280_DEV/BMP280_DEV.h:124:7: note: candidate: constexpr BMP280_DEV::BMP280_DEV(const BMP280_DEV&)
class BMP280_DEV : public Device { // Derive the BMP280_DEV class from the Device class
^~~~~~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BMP280_DEV/BMP280_DEV.h:124:7: note: candidate expects 1 argument, 2 provided
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BMP280_DEV/BMP280_DEV.h:124:7: note: candidate: constexpr BMP280_DEV::BMP280_DEV(BMP280_DEV&&)
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BMP280_DEV/BMP280_DEV.h:124:7: note: candidate expects 1 argument, 2 provided
Result: PASS
Sketch uses 10276 bytes (31%) of program storage space. Maximum is 32256 bytes. Global variables use 478 bytes (23%) of dynamic memory, leaving 1570 bytes for local variables. Maximum is 2048 bytes.
Result: PASS
Sketch uses 10268 bytes (31%) of program storage space. Maximum is 32256 bytes. Global variables use 478 bytes (23%) of dynamic memory, leaving 1570 bytes for local variables. Maximum is 2048 bytes.
Result: PASS
Sketch uses 10270 bytes (31%) of program storage space. Maximum is 32256 bytes. Global variables use 478 bytes (23%) of dynamic memory, leaving 1570 bytes for local variables. Maximum is 2048 bytes.
Result: PASS
Sketch uses 10288 bytes (31%) of program storage space. Maximum is 32256 bytes. Global variables use 478 bytes (23%) of dynamic memory, leaving 1570 bytes for local variables. Maximum is 2048 bytes.
Result: PASS
Sketch uses 10290 bytes (31%) of program storage space. Maximum is 32256 bytes. Global variables use 478 bytes (23%) of dynamic memory, leaving 1570 bytes for local variables. Maximum is 2048 bytes.
Result: PASS
Sketch uses 10726 bytes (33%) of program storage space. Maximum is 32256 bytes. Global variables use 526 bytes (25%) of dynamic memory, leaving 1522 bytes for local variables. Maximum is 2048 bytes.
Result: PASS
Sketch uses 83608 bytes (0%) of program storage space. Maximum is 16777216 bytes. Global variables use 44392 bytes (16%) of dynamic memory, leaving 225944 bytes for local variables. Maximum is 270336 bytes.
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BMP280_DEV/examples/BMP280_ESP32_HSPI_Normal/BMP280_ESP32_HSPI_Normal.ino:9:19: error: conflicting declaration 'arduino::SPIClass SPI1'
SPIClass SPI1(HSPI); // Create (instantiate) the SPI1 object for HSPI operation
^
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BMP280_DEV/Device.h:37:0,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BMP280_DEV/BMP280_DEV.h:46,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BMP280_DEV/examples/BMP280_ESP32_HSPI_Normal/BMP280_ESP32_HSPI_Normal.ino:5:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/libraries/SPI/SPI.h:66:25: note: previous declaration as 'arduino::MbedSPI SPI1'
extern arduino::MbedSPI SPI1;
^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BMP280_DEV/examples/BMP280_ESP32_HSPI_Normal/BMP280_ESP32_HSPI_Normal.ino:9:15: error: 'HSPI' was not declared in this scope
SPIClass SPI1(HSPI); // Create (instantiate) the SPI1 object for HSPI operation
^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BMP280_DEV/examples/BMP280_ESP32_HSPI_Normal/BMP280_ESP32_HSPI_Normal.ino:9:15: note: suggested alternative: 'SPI'
SPIClass SPI1(HSPI); // Create (instantiate) the SPI1 object for HSPI operation
^~~~
SPI
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BMP280_DEV/examples/BMP280_ESP32_HSPI_Normal/BMP280_ESP32_HSPI_Normal.ino:10:23: error: 'HSPI' was not declared in this scope
BMP280_DEV bmp280(21, HSPI, SPI1); // Create BMP280_DEV object and set-up for HSPI operation, SCK 14, MOSI 13, MISO 27, SS 21
^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BMP280_DEV/examples/BMP280_ESP32_HSPI_Normal/BMP280_ESP32_HSPI_Normal.ino:10:23: note: suggested alternative: 'SPI'
BMP280_DEV bmp280(21, HSPI, SPI1); // Create BMP280_DEV object and set-up for HSPI operation, SCK 14, MOSI 13, MISO 27, SS 21
^~~~
SPI
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BMP280_DEV/examples/BMP280_ESP32_HSPI_Normal/BMP280_ESP32_HSPI_Normal.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BMP280_DEV/examples/BMP280_ESP32_HSPI_Normal/BMP280_ESP32_HSPI_Normal.ino:19:3: error: 'xTaskCreatePinnedToCore' was not declared in this scope
xTaskCreatePinnedToCore( // Kick-off "TaskOne" pinned to core 1
^~~~~~~~~~~~~~~~~~~~~~~
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BMP280_DEV/examples/BMP280_ESP32_I2C_Normal_DefinedPins/BMP280_ESP32_I2C_Normal_DefinedPins.ino:8:25: error: no matching function for call to 'BMP280_DEV::BMP280_DEV(NinaPin&, NinaPin&)'
BMP280_DEV bmp280(A6, A7); // Instantiate (create) a BMP280 object and set-up for I2C operation on pins SDA: A6, SCL: A7
^
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BMP280_DEV/examples/BMP280_ESP32_I2C_Normal_DefinedPins/BMP280_ESP32_I2C_Normal_DefinedPins.ino:5:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BMP280_DEV/BMP280_DEV.h:130:3: note: candidate: BMP280_DEV::BMP280_DEV(uint8_t)
BMP280_DEV(uint8_t cs); // BMP280_DEV object for SPI operation
^~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BMP280_DEV/BMP280_DEV.h:130:3: note: candidate expects 1 argument, 2 provided
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BMP280_DEV/BMP280_DEV.h:126:3: note: candidate: BMP280_DEV::BMP280_DEV()
BMP280_DEV(); // BMP280_DEV object for I2C operation
^~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BMP280_DEV/BMP280_DEV.h:126:3: note: candidate expects 0 arguments, 2 provided
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BMP280_DEV/BMP280_DEV.h:124:7: note: candidate: constexpr BMP280_DEV::BMP280_DEV(const BMP280_DEV&)
class BMP280_DEV : public Device { // Derive the BMP280_DEV class from the Device class
^~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BMP280_DEV/BMP280_DEV.h:124:7: note: candidate expects 1 argument, 2 provided
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BMP280_DEV/BMP280_DEV.h:124:7: note: candidate: constexpr BMP280_DEV::BMP280_DEV(BMP280_DEV&&)
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BMP280_DEV/BMP280_DEV.h:124:7: note: candidate expects 1 argument, 2 provided
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BMP280_DEV/examples/BMP280_ESP8266_I2C_Normal_DefinedPins/BMP280_ESP8266_I2C_Normal_DefinedPins.ino:8:23: error: no matching function for call to 'BMP280_DEV::BMP280_DEV(int, int)'
BMP280_DEV bmp280(6, 7); // Instantiate (create) a BMP280 object and set-up for I2C operation on pins SDA: 6, SCL: 7
^
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BMP280_DEV/examples/BMP280_ESP8266_I2C_Normal_DefinedPins/BMP280_ESP8266_I2C_Normal_DefinedPins.ino:5:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BMP280_DEV/BMP280_DEV.h:130:3: note: candidate: BMP280_DEV::BMP280_DEV(uint8_t)
BMP280_DEV(uint8_t cs); // BMP280_DEV object for SPI operation
^~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BMP280_DEV/BMP280_DEV.h:130:3: note: candidate expects 1 argument, 2 provided
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BMP280_DEV/BMP280_DEV.h:126:3: note: candidate: BMP280_DEV::BMP280_DEV()
BMP280_DEV(); // BMP280_DEV object for I2C operation
^~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BMP280_DEV/BMP280_DEV.h:126:3: note: candidate expects 0 arguments, 2 provided
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BMP280_DEV/BMP280_DEV.h:124:7: note: candidate: constexpr BMP280_DEV::BMP280_DEV(const BMP280_DEV&)
class BMP280_DEV : public Device { // Derive the BMP280_DEV class from the Device class
^~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BMP280_DEV/BMP280_DEV.h:124:7: note: candidate expects 1 argument, 2 provided
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BMP280_DEV/BMP280_DEV.h:124:7: note: candidate: constexpr BMP280_DEV::BMP280_DEV(BMP280_DEV&&)
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BMP280_DEV/BMP280_DEV.h:124:7: note: candidate expects 1 argument, 2 provided
Result: PASS
Sketch uses 90790 bytes (0%) of program storage space. Maximum is 16777216 bytes. Global variables use 44464 bytes (16%) of dynamic memory, leaving 225872 bytes for local variables. Maximum is 270336 bytes.
Result: PASS
Sketch uses 90758 bytes (0%) of program storage space. Maximum is 16777216 bytes. Global variables use 44464 bytes (16%) of dynamic memory, leaving 225872 bytes for local variables. Maximum is 270336 bytes.
Result: PASS
Sketch uses 90772 bytes (0%) of program storage space. Maximum is 16777216 bytes. Global variables use 44464 bytes (16%) of dynamic memory, leaving 225872 bytes for local variables. Maximum is 270336 bytes.
Result: PASS
Sketch uses 90754 bytes (0%) of program storage space. Maximum is 16777216 bytes. Global variables use 44464 bytes (16%) of dynamic memory, leaving 225872 bytes for local variables. Maximum is 270336 bytes.
Result: PASS
Sketch uses 90768 bytes (0%) of program storage space. Maximum is 16777216 bytes. Global variables use 44464 bytes (16%) of dynamic memory, leaving 225872 bytes for local variables. Maximum is 270336 bytes.
Result: PASS
Sketch uses 90944 bytes (0%) of program storage space. Maximum is 16777216 bytes. Global variables use 44520 bytes (16%) of dynamic memory, leaving 225816 bytes for local variables. Maximum is 270336 bytes.
Result: PASS
Sketch uses 5482 bytes (11%) of program storage space. Maximum is 49152 bytes. Global variables use 335 bytes (5%) of dynamic memory, leaving 5809 bytes for local variables. Maximum is 6144 bytes.
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BMP280_DEV/examples/BMP280_ESP32_HSPI_Normal/BMP280_ESP32_HSPI_Normal.ino:9:15: error: 'HSPI' was not declared in this scope
SPIClass SPI1(HSPI); // Create (instantiate) the SPI1 object for HSPI operation
^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BMP280_DEV/examples/BMP280_ESP32_HSPI_Normal/BMP280_ESP32_HSPI_Normal.ino:9:15: note: suggested alternative: 'SPI'
SPIClass SPI1(HSPI); // Create (instantiate) the SPI1 object for HSPI operation
^~~~
SPI
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BMP280_DEV/examples/BMP280_ESP32_HSPI_Normal/BMP280_ESP32_HSPI_Normal.ino:10:23: error: 'HSPI' was not declared in this scope
BMP280_DEV bmp280(21, HSPI, SPI1); // Create BMP280_DEV object and set-up for HSPI operation, SCK 14, MOSI 13, MISO 27, SS 21
^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BMP280_DEV/examples/BMP280_ESP32_HSPI_Normal/BMP280_ESP32_HSPI_Normal.ino:10:23: note: suggested alternative: 'SPI'
BMP280_DEV bmp280(21, HSPI, SPI1); // Create BMP280_DEV object and set-up for HSPI operation, SCK 14, MOSI 13, MISO 27, SS 21
^~~~
SPI
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BMP280_DEV/examples/BMP280_ESP32_HSPI_Normal/BMP280_ESP32_HSPI_Normal.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BMP280_DEV/examples/BMP280_ESP32_HSPI_Normal/BMP280_ESP32_HSPI_Normal.ino:19:3: error: 'xTaskCreatePinnedToCore' was not declared in this scope
xTaskCreatePinnedToCore( // Kick-off "TaskOne" pinned to core 1
^~~~~~~~~~~~~~~~~~~~~~~
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BMP280_DEV/examples/BMP280_ESP32_I2C_Normal_DefinedPins/BMP280_ESP32_I2C_Normal_DefinedPins.ino:8:25: error: no matching function for call to 'BMP280_DEV::BMP280_DEV(const uint8_t&, const uint8_t&)'
BMP280_DEV bmp280(A6, A7); // Instantiate (create) a BMP280 object and set-up for I2C operation on pins SDA: A6, SCL: A7
^
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BMP280_DEV/examples/BMP280_ESP32_I2C_Normal_DefinedPins/BMP280_ESP32_I2C_Normal_DefinedPins.ino:5:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BMP280_DEV/BMP280_DEV.h:130:3: note: candidate: BMP280_DEV::BMP280_DEV(uint8_t)
BMP280_DEV(uint8_t cs); // BMP280_DEV object for SPI operation
^~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BMP280_DEV/BMP280_DEV.h:130:3: note: candidate expects 1 argument, 2 provided
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BMP280_DEV/BMP280_DEV.h:126:3: note: candidate: BMP280_DEV::BMP280_DEV()
BMP280_DEV(); // BMP280_DEV object for I2C operation
^~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BMP280_DEV/BMP280_DEV.h:126:3: note: candidate expects 0 arguments, 2 provided
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BMP280_DEV/BMP280_DEV.h:124:7: note: candidate: constexpr BMP280_DEV::BMP280_DEV(const BMP280_DEV&)
class BMP280_DEV : public Device { // Derive the BMP280_DEV class from the Device class
^~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BMP280_DEV/BMP280_DEV.h:124:7: note: candidate expects 1 argument, 2 provided
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BMP280_DEV/BMP280_DEV.h:124:7: note: candidate: constexpr BMP280_DEV::BMP280_DEV(BMP280_DEV&&)
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BMP280_DEV/BMP280_DEV.h:124:7: note: candidate expects 1 argument, 2 provided
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BMP280_DEV/examples/BMP280_ESP8266_I2C_Normal_DefinedPins/BMP280_ESP8266_I2C_Normal_DefinedPins.ino:8:23: error: no matching function for call to 'BMP280_DEV::BMP280_DEV(int, int)'
BMP280_DEV bmp280(6, 7); // Instantiate (create) a BMP280 object and set-up for I2C operation on pins SDA: 6, SCL: 7
^
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BMP280_DEV/examples/BMP280_ESP8266_I2C_Normal_DefinedPins/BMP280_ESP8266_I2C_Normal_DefinedPins.ino:5:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BMP280_DEV/BMP280_DEV.h:130:3: note: candidate: BMP280_DEV::BMP280_DEV(uint8_t)
BMP280_DEV(uint8_t cs); // BMP280_DEV object for SPI operation
^~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BMP280_DEV/BMP280_DEV.h:130:3: note: candidate expects 1 argument, 2 provided
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BMP280_DEV/BMP280_DEV.h:126:3: note: candidate: BMP280_DEV::BMP280_DEV()
BMP280_DEV(); // BMP280_DEV object for I2C operation
^~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BMP280_DEV/BMP280_DEV.h:126:3: note: candidate expects 0 arguments, 2 provided
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BMP280_DEV/BMP280_DEV.h:124:7: note: candidate: constexpr BMP280_DEV::BMP280_DEV(const BMP280_DEV&)
class BMP280_DEV : public Device { // Derive the BMP280_DEV class from the Device class
^~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BMP280_DEV/BMP280_DEV.h:124:7: note: candidate expects 1 argument, 2 provided
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BMP280_DEV/BMP280_DEV.h:124:7: note: candidate: constexpr BMP280_DEV::BMP280_DEV(BMP280_DEV&&)
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BMP280_DEV/BMP280_DEV.h:124:7: note: candidate expects 1 argument, 2 provided
Result: PASS
Sketch uses 13417 bytes (27%) of program storage space. Maximum is 49152 bytes. Global variables use 628 bytes (10%) of dynamic memory, leaving 5516 bytes for local variables. Maximum is 6144 bytes.
Result: PASS
Sketch uses 13409 bytes (27%) of program storage space. Maximum is 49152 bytes. Global variables use 628 bytes (10%) of dynamic memory, leaving 5516 bytes for local variables. Maximum is 6144 bytes.
Result: PASS
Sketch uses 13411 bytes (27%) of program storage space. Maximum is 49152 bytes. Global variables use 628 bytes (10%) of dynamic memory, leaving 5516 bytes for local variables. Maximum is 6144 bytes.
Result: PASS
Sketch uses 13425 bytes (27%) of program storage space. Maximum is 49152 bytes. Global variables use 628 bytes (10%) of dynamic memory, leaving 5516 bytes for local variables. Maximum is 6144 bytes.
Result: PASS
Sketch uses 13427 bytes (27%) of program storage space. Maximum is 49152 bytes. Global variables use 628 bytes (10%) of dynamic memory, leaving 5516 bytes for local variables. Maximum is 6144 bytes.
Result: PASS
Sketch uses 13917 bytes (28%) of program storage space. Maximum is 49152 bytes. Global variables use 676 bytes (11%) of dynamic memory, leaving 5468 bytes for local variables. Maximum is 6144 bytes.
Result: PASS
Sketch uses 14780 bytes (5%) of program storage space. Maximum is 262144 bytes. Global variables use 3656 bytes (11%) of dynamic memory, leaving 29112 bytes for local variables. Maximum is 32768 bytes.
Result: FAIL
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BMP280_DEV/examples/BMP280_ESP32_HSPI_Normal/BMP280_ESP32_HSPI_Normal.ino:9:19: error: conflicting declaration 'arduino::SPIClass SPI1'
SPIClass SPI1(HSPI); // Create (instantiate) the SPI1 object for HSPI operation
^
In file included from /Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BMP280_DEV/Device.h:37:0,
from /Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BMP280_DEV/BMP280_DEV.h:46,
from /Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BMP280_DEV/examples/BMP280_ESP32_HSPI_Normal/BMP280_ESP32_HSPI_Normal.ino:5:
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/libraries/SPI/SPI.h:96:23: note: previous declaration as 'SPIClassSAMD SPI1'
extern SPIClassSAMD SPI1;
^~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BMP280_DEV/examples/BMP280_ESP32_HSPI_Normal/BMP280_ESP32_HSPI_Normal.ino:9:15: error: 'HSPI' was not declared in this scope
SPIClass SPI1(HSPI); // Create (instantiate) the SPI1 object for HSPI operation
^~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BMP280_DEV/examples/BMP280_ESP32_HSPI_Normal/BMP280_ESP32_HSPI_Normal.ino:9:15: note: suggested alternative: 'SPI'
SPIClass SPI1(HSPI); // Create (instantiate) the SPI1 object for HSPI operation
^~~~
SPI
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BMP280_DEV/examples/BMP280_ESP32_HSPI_Normal/BMP280_ESP32_HSPI_Normal.ino:10:23: error: 'HSPI' was not declared in this scope
BMP280_DEV bmp280(21, HSPI, SPI1); // Create BMP280_DEV object and set-up for HSPI operation, SCK 14, MOSI 13, MISO 27, SS 21
^~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BMP280_DEV/examples/BMP280_ESP32_HSPI_Normal/BMP280_ESP32_HSPI_Normal.ino:10:23: note: suggested alternative: 'SPI'
BMP280_DEV bmp280(21, HSPI, SPI1); // Create BMP280_DEV object and set-up for HSPI operation, SCK 14, MOSI 13, MISO 27, SS 21
^~~~
SPI
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BMP280_DEV/examples/BMP280_ESP32_HSPI_Normal/BMP280_ESP32_HSPI_Normal.ino: In function 'void setup()':
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BMP280_DEV/examples/BMP280_ESP32_HSPI_Normal/BMP280_ESP32_HSPI_Normal.ino:19:3: error: 'xTaskCreatePinnedToCore' was not declared in this scope
xTaskCreatePinnedToCore( // Kick-off "TaskOne" pinned to core 1
^~~~~~~~~~~~~~~~~~~~~~~
Result: FAIL
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BMP280_DEV/examples/BMP280_ESP32_I2C_Normal_DefinedPins/BMP280_ESP32_I2C_Normal_DefinedPins.ino:8:23: error: 'A7' was not declared in this scope
BMP280_DEV bmp280(A6, A7); // Instantiate (create) a BMP280 object and set-up for I2C operation on pins SDA: A6, SCL: A7
^~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BMP280_DEV/examples/BMP280_ESP32_I2C_Normal_DefinedPins/BMP280_ESP32_I2C_Normal_DefinedPins.ino:8:23: note: suggested alternative: 'A6'
BMP280_DEV bmp280(A6, A7); // Instantiate (create) a BMP280 object and set-up for I2C operation on pins SDA: A6, SCL: A7
^~
A6
Result: FAIL
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BMP280_DEV/examples/BMP280_ESP8266_I2C_Normal_DefinedPins/BMP280_ESP8266_I2C_Normal_DefinedPins.ino:8:23: error: no matching function for call to 'BMP280_DEV::BMP280_DEV(int, int)'
BMP280_DEV bmp280(6, 7); // Instantiate (create) a BMP280 object and set-up for I2C operation on pins SDA: 6, SCL: 7
^
In file included from /Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BMP280_DEV/examples/BMP280_ESP8266_I2C_Normal_DefinedPins/BMP280_ESP8266_I2C_Normal_DefinedPins.ino:5:0:
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BMP280_DEV/BMP280_DEV.h:130:3: note: candidate: BMP280_DEV::BMP280_DEV(uint8_t)
BMP280_DEV(uint8_t cs); // BMP280_DEV object for SPI operation
^~~~~~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BMP280_DEV/BMP280_DEV.h:130:3: note: candidate expects 1 argument, 2 provided
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BMP280_DEV/BMP280_DEV.h:126:3: note: candidate: BMP280_DEV::BMP280_DEV()
BMP280_DEV(); // BMP280_DEV object for I2C operation
^~~~~~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BMP280_DEV/BMP280_DEV.h:126:3: note: candidate expects 0 arguments, 2 provided
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BMP280_DEV/BMP280_DEV.h:124:7: note: candidate: constexpr BMP280_DEV::BMP280_DEV(const BMP280_DEV&)
class BMP280_DEV : public Device { // Derive the BMP280_DEV class from the Device class
^~~~~~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BMP280_DEV/BMP280_DEV.h:124:7: note: candidate expects 1 argument, 2 provided
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BMP280_DEV/BMP280_DEV.h:124:7: note: candidate: constexpr BMP280_DEV::BMP280_DEV(BMP280_DEV&&)
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BMP280_DEV/BMP280_DEV.h:124:7: note: candidate expects 1 argument, 2 provided
Result: PASS
Sketch uses 30676 bytes (11%) of program storage space. Maximum is 262144 bytes. Global variables use 3724 bytes (11%) of dynamic memory, leaving 29044 bytes for local variables. Maximum is 32768 bytes.
Result: PASS
Sketch uses 30644 bytes (11%) of program storage space. Maximum is 262144 bytes. Global variables use 3724 bytes (11%) of dynamic memory, leaving 29044 bytes for local variables. Maximum is 32768 bytes.
Result: PASS
Sketch uses 30660 bytes (11%) of program storage space. Maximum is 262144 bytes. Global variables use 3724 bytes (11%) of dynamic memory, leaving 29044 bytes for local variables. Maximum is 32768 bytes.
Result: PASS
Sketch uses 30644 bytes (11%) of program storage space. Maximum is 262144 bytes. Global variables use 3724 bytes (11%) of dynamic memory, leaving 29044 bytes for local variables. Maximum is 32768 bytes.
Result: PASS
Sketch uses 30660 bytes (11%) of program storage space. Maximum is 262144 bytes. Global variables use 3724 bytes (11%) of dynamic memory, leaving 29044 bytes for local variables. Maximum is 32768 bytes.
Result: PASS
Sketch uses 30852 bytes (11%) of program storage space. Maximum is 262144 bytes. Global variables use 3780 bytes (11%) of dynamic memory, leaving 28988 bytes for local variables. Maximum is 32768 bytes.
Result: PASS
Sketch uses 203866 bytes (15%) of program storage space. Maximum is 1310720 bytes. Global variables use 13920 bytes (4%) of dynamic memory, leaving 313760 bytes for local variables. Maximum is 327680 bytes.
Result: PASS
Sketch uses 223030 bytes (17%) of program storage space. Maximum is 1310720 bytes. Global variables use 14336 bytes (4%) of dynamic memory, leaving 313344 bytes for local variables. Maximum is 327680 bytes.
Result: PASS
Sketch uses 222946 bytes (17%) of program storage space. Maximum is 1310720 bytes. Global variables use 14304 bytes (4%) of dynamic memory, leaving 313376 bytes for local variables. Maximum is 327680 bytes.
Result: PASS
Sketch uses 222946 bytes (17%) of program storage space. Maximum is 1310720 bytes. Global variables use 14304 bytes (4%) of dynamic memory, leaving 313376 bytes for local variables. Maximum is 327680 bytes.
Result: PASS
Sketch uses 222954 bytes (17%) of program storage space. Maximum is 1310720 bytes. Global variables use 14304 bytes (4%) of dynamic memory, leaving 313376 bytes for local variables. Maximum is 327680 bytes.
Result: PASS
Sketch uses 222914 bytes (17%) of program storage space. Maximum is 1310720 bytes. Global variables use 14304 bytes (4%) of dynamic memory, leaving 313376 bytes for local variables. Maximum is 327680 bytes.
Result: PASS
Sketch uses 222930 bytes (17%) of program storage space. Maximum is 1310720 bytes. Global variables use 14304 bytes (4%) of dynamic memory, leaving 313376 bytes for local variables. Maximum is 327680 bytes.
Result: PASS
Sketch uses 222914 bytes (17%) of program storage space. Maximum is 1310720 bytes. Global variables use 14304 bytes (4%) of dynamic memory, leaving 313376 bytes for local variables. Maximum is 327680 bytes.
Result: PASS
Sketch uses 222930 bytes (17%) of program storage space. Maximum is 1310720 bytes. Global variables use 14304 bytes (4%) of dynamic memory, leaving 313376 bytes for local variables. Maximum is 327680 bytes.
Result: PASS
Sketch uses 223114 bytes (17%) of program storage space. Maximum is 1310720 bytes. Global variables use 14368 bytes (4%) of dynamic memory, leaving 313312 bytes for local variables. Maximum is 327680 bytes.