BNO055 - compatibility matrix

This report was generated on Wednesday, 23-Feb-22 22:48:15 CET using arduino-testlib.

BNO055

Version: 1.2.1
More details

Compatibility matrix

Board	Claims compatibility	Inclusion	Sensor_Calibration	Basic	Command_Line_Configuration	Euler_Streaming
arduino:avr:uno 1.8.4	No ⚠️	PASS	PASS	PASS	PASS	PASS
arduino:mbed_nano:nanorp2040connect 2.7.2	No ⚠️	PASS	PASS	PASS	PASS	PASS
arduino:megaavr:nona4809 1.8.7	No ⚠️	PASS	PASS	PASS	PASS	PASS
arduino:samd:mkrwifi1010 1.8.12	Yes	PASS	PASS	PASS	PASS	PASS
esp32:esp32:d1_mini32 1.0.6	No ⚠️	PASS	PASS	PASS	PASS	PASS

Compilation logs

arduino:avr:uno @ 1.8.4

Inclusion

Result: PASS

WARNING: library BNO055 claims to run on samd architecture(s) and may be incompatible with your current board which runs on avr architecture(s).
Sketch uses 1636 bytes (5%) of program storage space. Maximum is 32256 bytes.
Global variables use 122 bytes (5%) of dynamic memory, leaving 1926 bytes for local variables. Maximum is 2048 bytes.

examples/Basic

Result: PASS

WARNING: library BNO055 claims to run on samd architecture(s) and may be incompatible with your current board which runs on avr architecture(s).
Sketch uses 5370 bytes (16%) of program storage space. Maximum is 32256 bytes.
Global variables use 584 bytes (28%) of dynamic memory, leaving 1464 bytes for local variables. Maximum is 2048 bytes.

examples/Command_Line_Configuration

Result: PASS

WARNING: library BNO055 claims to run on samd architecture(s) and may be incompatible with your current board which runs on avr architecture(s).
Sketch uses 8716 bytes (27%) of program storage space. Maximum is 32256 bytes.
Global variables use 1399 bytes (68%) of dynamic memory, leaving 649 bytes for local variables. Maximum is 2048 bytes.

examples/Euler_Streaming

Result: PASS

WARNING: library BNO055 claims to run on samd architecture(s) and may be incompatible with your current board which runs on avr architecture(s).
Sketch uses 6890 bytes (21%) of program storage space. Maximum is 32256 bytes.
Global variables use 484 bytes (23%) of dynamic memory, leaving 1564 bytes for local variables. Maximum is 2048 bytes.

examples/Sensor_Calibration

Result: PASS

WARNING: library BNO055 claims to run on samd architecture(s) and may be incompatible with your current board which runs on avr architecture(s).
Sketch uses 5760 bytes (17%) of program storage space. Maximum is 32256 bytes.
Global variables use 568 bytes (27%) of dynamic memory, leaving 1480 bytes for local variables. Maximum is 2048 bytes.

arduino:mbed_nano:nanorp2040connect @ 2.7.2

Inclusion

Result: PASS

WARNING: library BNO055 claims to run on samd architecture(s) and may be incompatible with your current board which runs on mbed_nano architecture(s).
Sketch uses 81706 bytes (0%) of program storage space. Maximum is 16777216 bytes.
Global variables use 44220 bytes (16%) of dynamic memory, leaving 226116 bytes for local variables. Maximum is 270336 bytes.

examples/Basic

Result: PASS

WARNING: library BNO055 claims to run on samd architecture(s) and may be incompatible with your current board which runs on mbed_nano architecture(s).
Sketch uses 82720 bytes (0%) of program storage space. Maximum is 16777216 bytes.
Global variables use 44244 bytes (16%) of dynamic memory, leaving 226092 bytes for local variables. Maximum is 270336 bytes.

examples/Command_Line_Configuration

Result: PASS

WARNING: library BNO055 claims to run on samd architecture(s) and may be incompatible with your current board which runs on mbed_nano architecture(s).
Sketch uses 84450 bytes (0%) of program storage space. Maximum is 16777216 bytes.
Global variables use 44252 bytes (16%) of dynamic memory, leaving 226084 bytes for local variables. Maximum is 270336 bytes.

examples/Euler_Streaming

Result: PASS

WARNING: library BNO055 claims to run on samd architecture(s) and may be incompatible with your current board which runs on mbed_nano architecture(s).
Sketch uses 83618 bytes (0%) of program storage space. Maximum is 16777216 bytes.
Global variables use 44252 bytes (16%) of dynamic memory, leaving 226084 bytes for local variables. Maximum is 270336 bytes.

examples/Sensor_Calibration

Result: PASS

WARNING: library BNO055 claims to run on samd architecture(s) and may be incompatible with your current board which runs on mbed_nano architecture(s).
Sketch uses 82962 bytes (0%) of program storage space. Maximum is 16777216 bytes.
Global variables use 44252 bytes (16%) of dynamic memory, leaving 226084 bytes for local variables. Maximum is 270336 bytes.

arduino:megaavr:nona4809 @ 1.8.7

Inclusion

Result: PASS

WARNING: library BNO055 claims to run on samd architecture(s) and may be incompatible with your current board which runs on megaavr architecture(s).
Sketch uses 3104 bytes (6%) of program storage space. Maximum is 49152 bytes.
Global variables use 317 bytes (5%) of dynamic memory, leaving 5827 bytes for local variables. Maximum is 6144 bytes.
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BNO055/BNO055_support.h:37:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BNO055/BNO055_support.cpp:31:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h: In function 'int BNO055_I2C_bus_read(unsigned char, unsigned char, unsigned char*, unsigned char)':
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:63:12: note: candidate 1: size_t TwoWire::requestFrom(int, int)
     size_t requestFrom(int, int);
            ^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:61:12: note: candidate 2: virtual size_t TwoWire::requestFrom(uint8_t, size_t)
     size_t requestFrom(uint8_t, size_t);
            ^~~~~~~~~~~

examples/Basic

Result: PASS

WARNING: library BNO055 claims to run on samd architecture(s) and may be incompatible with your current board which runs on megaavr architecture(s).
Sketch uses 6251 bytes (12%) of program storage space. Maximum is 49152 bytes.
Global variables use 500 bytes (8%) of dynamic memory, leaving 5644 bytes for local variables. Maximum is 6144 bytes.
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BNO055/BNO055_support.h:37:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BNO055/BNO055_support.cpp:31:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h: In function 'int BNO055_I2C_bus_read(unsigned char, unsigned char, unsigned char*, unsigned char)':
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:63:12: note: candidate 1: size_t TwoWire::requestFrom(int, int)
     size_t requestFrom(int, int);
            ^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:61:12: note: candidate 2: virtual size_t TwoWire::requestFrom(uint8_t, size_t)
     size_t requestFrom(uint8_t, size_t);
            ^~~~~~~~~~~

examples/Command_Line_Configuration

Result: PASS

WARNING: library BNO055 claims to run on samd architecture(s) and may be incompatible with your current board which runs on megaavr architecture(s).
Sketch uses 9588 bytes (19%) of program storage space. Maximum is 49152 bytes.
Global variables use 511 bytes (8%) of dynamic memory, leaving 5633 bytes for local variables. Maximum is 6144 bytes.
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BNO055/BNO055_support.h:37:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BNO055/BNO055_support.cpp:31:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h: In function 'int BNO055_I2C_bus_read(unsigned char, unsigned char, unsigned char*, unsigned char)':
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:63:12: note: candidate 1: size_t TwoWire::requestFrom(int, int)
     size_t requestFrom(int, int);
            ^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:61:12: note: candidate 2: virtual size_t TwoWire::requestFrom(uint8_t, size_t)
     size_t requestFrom(uint8_t, size_t);
            ^~~~~~~~~~~

examples/Euler_Streaming

Result: PASS

WARNING: library BNO055 claims to run on samd architecture(s) and may be incompatible with your current board which runs on megaavr architecture(s).
Sketch uses 7764 bytes (15%) of program storage space. Maximum is 49152 bytes.
Global variables use 510 bytes (8%) of dynamic memory, leaving 5634 bytes for local variables. Maximum is 6144 bytes.
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BNO055/BNO055_support.h:37:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BNO055/BNO055_support.cpp:31:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h: In function 'int BNO055_I2C_bus_read(unsigned char, unsigned char, unsigned char*, unsigned char)':
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:63:12: note: candidate 1: size_t TwoWire::requestFrom(int, int)
     size_t requestFrom(int, int);
            ^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:61:12: note: candidate 2: virtual size_t TwoWire::requestFrom(uint8_t, size_t)
     size_t requestFrom(uint8_t, size_t);
            ^~~~~~~~~~~

examples/Sensor_Calibration

Result: PASS

WARNING: library BNO055 claims to run on samd architecture(s) and may be incompatible with your current board which runs on megaavr architecture(s).
Sketch uses 6640 bytes (13%) of program storage space. Maximum is 49152 bytes.
Global variables use 508 bytes (8%) of dynamic memory, leaving 5636 bytes for local variables. Maximum is 6144 bytes.
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BNO055/BNO055_support.h:37:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BNO055/BNO055_support.cpp:31:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h: In function 'int BNO055_I2C_bus_read(unsigned char, unsigned char, unsigned char*, unsigned char)':
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:63:12: note: candidate 1: size_t TwoWire::requestFrom(int, int)
     size_t requestFrom(int, int);
            ^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:61:12: note: candidate 2: virtual size_t TwoWire::requestFrom(uint8_t, size_t)
     size_t requestFrom(uint8_t, size_t);
            ^~~~~~~~~~~

arduino:samd:mkrwifi1010 @ 1.8.12

Inclusion

Result: PASS

Sketch uses 13588 bytes (5%) of program storage space. Maximum is 262144 bytes.
Global variables use 3568 bytes (10%) of dynamic memory, leaving 29200 bytes for local variables. Maximum is 32768 bytes.

examples/Basic

Result: PASS

Sketch uses 14920 bytes (5%) of program storage space. Maximum is 262144 bytes.
Global variables use 3592 bytes (10%) of dynamic memory, leaving 29176 bytes for local variables. Maximum is 32768 bytes.

examples/Command_Line_Configuration

Result: PASS

Sketch uses 24648 bytes (9%) of program storage space. Maximum is 262144 bytes.
Global variables use 3604 bytes (10%) of dynamic memory, leaving 29164 bytes for local variables. Maximum is 32768 bytes.

examples/Euler_Streaming

Result: PASS

Sketch uses 22900 bytes (8%) of program storage space. Maximum is 262144 bytes.
Global variables use 3604 bytes (10%) of dynamic memory, leaving 29164 bytes for local variables. Maximum is 32768 bytes.

examples/Sensor_Calibration

Result: PASS

Sketch uses 15152 bytes (5%) of program storage space. Maximum is 262144 bytes.
Global variables use 3608 bytes (11%) of dynamic memory, leaving 29160 bytes for local variables. Maximum is 32768 bytes.

esp32:esp32:d1_mini32 @ 1.0.6

Inclusion

Result: PASS

WARNING: library BNO055 claims to run on samd architecture(s) and may be incompatible with your current board which runs on esp32 architecture(s).
Sketch uses 202466 bytes (15%) of program storage space. Maximum is 1310720 bytes.
Global variables use 13880 bytes (4%) of dynamic memory, leaving 313800 bytes for local variables. Maximum is 327680 bytes.

examples/Basic

Result: PASS

WARNING: library BNO055 claims to run on samd architecture(s) and may be incompatible with your current board which runs on esp32 architecture(s).
Sketch uses 214198 bytes (16%) of program storage space. Maximum is 1310720 bytes.
Global variables use 14160 bytes (4%) of dynamic memory, leaving 313520 bytes for local variables. Maximum is 327680 bytes.

examples/Command_Line_Configuration

Result: PASS

WARNING: library BNO055 claims to run on samd architecture(s) and may be incompatible with your current board which runs on esp32 architecture(s).
Sketch uses 216682 bytes (16%) of program storage space. Maximum is 1310720 bytes.
Global variables use 14176 bytes (4%) of dynamic memory, leaving 313504 bytes for local variables. Maximum is 327680 bytes.

examples/Euler_Streaming

Result: PASS

WARNING: library BNO055 claims to run on samd architecture(s) and may be incompatible with your current board which runs on esp32 architecture(s).
Sketch uses 214754 bytes (16%) of program storage space. Maximum is 1310720 bytes.
Global variables use 14168 bytes (4%) of dynamic memory, leaving 313512 bytes for local variables. Maximum is 327680 bytes.

examples/Sensor_Calibration

Result: PASS

WARNING: library BNO055 claims to run on samd architecture(s) and may be incompatible with your current board which runs on esp32 architecture(s).
Sketch uses 214438 bytes (16%) of program storage space. Maximum is 1310720 bytes.
Global variables use 14168 bytes (4%) of dynamic memory, leaving 313512 bytes for local variables. Maximum is 327680 bytes.