BTLE - compatibility matrix

This report was generated on Wednesday, 23-Feb-22 22:48:15 CET using arduino-testlib.

BTLE

Compatibility matrix

Board	Claims compatibility	Inclusion	recv	send	temperature
arduino:avr:uno 1.8.4	Yes	PASS	PASS	PASS	PASS
arduino:mbed_nano:nanorp2040connect 2.7.2	No ⚠️	PASS	PASS	PASS	FAIL
arduino:megaavr:nona4809 1.8.7	No ⚠️	PASS	PASS	PASS	PASS
arduino:samd:mkrwifi1010 1.8.12	No ⚠️	PASS	PASS	PASS	FAIL
esp32:esp32:d1_mini32 1.0.6	No ⚠️	PASS	PASS	PASS	FAIL

Compilation logs

arduino:avr:uno @ 1.8.4

Inclusion

Result: PASS

Sketch uses 444 bytes (1%) of program storage space. Maximum is 32256 bytes.
Global variables use 9 bytes (0%) of dynamic memory, leaving 2039 bytes for local variables. Maximum is 2048 bytes.

examples/recv

Result: PASS

Sketch uses 4246 bytes (13%) of program storage space. Maximum is 32256 bytes.
Global variables use 327 bytes (15%) of dynamic memory, leaving 1721 bytes for local variables. Maximum is 2048 bytes.

examples/send

Result: PASS

Sketch uses 4226 bytes (13%) of program storage space. Maximum is 32256 bytes.
Global variables use 299 bytes (14%) of dynamic memory, leaving 1749 bytes for local variables. Maximum is 2048 bytes.

examples/temperature

Result: PASS

Sketch uses 5504 bytes (17%) of program storage space. Maximum is 32256 bytes.
Global variables use 339 bytes (16%) of dynamic memory, leaving 1709 bytes for local variables. Maximum is 2048 bytes.

arduino:mbed_nano:nanorp2040connect @ 2.7.2

Inclusion

Result: PASS

WARNING: library BTLE claims to run on avr architecture(s) and may be incompatible with your current board which runs on mbed_nano architecture(s).
Sketch uses 80722 bytes (0%) of program storage space. Maximum is 16777216 bytes.
Global variables use 43616 bytes (16%) of dynamic memory, leaving 226720 bytes for local variables. Maximum is 270336 bytes.

examples/recv

Result: PASS

WARNING: library BTLE claims to run on avr architecture(s) and may be incompatible with your current board which runs on mbed_nano architecture(s).
Sketch uses 83560 bytes (0%) of program storage space. Maximum is 16777216 bytes.
Global variables use 43700 bytes (16%) of dynamic memory, leaving 226636 bytes for local variables. Maximum is 270336 bytes.

examples/send

Result: PASS

WARNING: library BTLE claims to run on avr architecture(s) and may be incompatible with your current board which runs on mbed_nano architecture(s).
Sketch uses 83618 bytes (0%) of program storage space. Maximum is 16777216 bytes.
Global variables use 43700 bytes (16%) of dynamic memory, leaving 226636 bytes for local variables. Maximum is 270336 bytes.

examples/temperature

Result: FAIL

WARNING: library BTLE claims to run on avr architecture(s) and may be incompatible with your current board which runs on mbed_nano architecture(s).
WARNING: library DHTlib claims to run on avr architecture(s) and may be incompatible with your current board which runs on mbed_nano architecture(s).
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DHTlib/dht.cpp: In member function 'int8_t dht::_readSensor(uint8_t, uint8_t, uint8_t)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DHTlib/dht.cpp:215:19: error: 'digitalPinToBitMask' was not declared in this scope
     uint8_t bit = digitalPinToBitMask(pin);
                   ^~~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DHTlib/dht.cpp:215:19: note: suggested alternative: 'digitalPinToPinName'
     uint8_t bit = digitalPinToBitMask(pin);
                   ^~~~~~~~~~~~~~~~~~~
                   digitalPinToPinName
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DHTlib/dht.cpp:217:29: error: 'portInputRegister' was not declared in this scope
     volatile uint8_t *PIR = portInputRegister(port);
                             ^~~~~~~~~~~~~~~~~
Multiple libraries were found for "dht.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DHTlib
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/UncleRus

arduino:megaavr:nona4809 @ 1.8.7

Inclusion

Result: PASS

WARNING: library BTLE claims to run on avr architecture(s) and may be incompatible with your current board which runs on megaavr architecture(s).
Sketch uses 3246 bytes (6%) of program storage space. Maximum is 49152 bytes.
Global variables use 40 bytes (0%) of dynamic memory, leaving 6104 bytes for local variables. Maximum is 6144 bytes.

examples/recv

Result: PASS

WARNING: library BTLE claims to run on avr architecture(s) and may be incompatible with your current board which runs on megaavr architecture(s).
Sketch uses 7823 bytes (15%) of program storage space. Maximum is 49152 bytes.
Global variables use 330 bytes (5%) of dynamic memory, leaving 5814 bytes for local variables. Maximum is 6144 bytes.

examples/send

Result: PASS

WARNING: library BTLE claims to run on avr architecture(s) and may be incompatible with your current board which runs on megaavr architecture(s).
Sketch uses 7742 bytes (15%) of program storage space. Maximum is 49152 bytes.
Global variables use 330 bytes (5%) of dynamic memory, leaving 5814 bytes for local variables. Maximum is 6144 bytes.

examples/temperature

Result: PASS

WARNING: library BTLE claims to run on avr architecture(s) and may be incompatible with your current board which runs on megaavr architecture(s).
WARNING: library DHTlib claims to run on avr architecture(s) and may be incompatible with your current board which runs on megaavr architecture(s).
Sketch uses 8951 bytes (18%) of program storage space. Maximum is 49152 bytes.
Global variables use 344 bytes (5%) of dynamic memory, leaving 5800 bytes for local variables. Maximum is 6144 bytes.

arduino:samd:mkrwifi1010 @ 1.8.12

Inclusion

Result: PASS

WARNING: library BTLE claims to run on avr architecture(s) and may be incompatible with your current board which runs on samd architecture(s).
Sketch uses 13336 bytes (5%) of program storage space. Maximum is 262144 bytes.
Global variables use 3068 bytes (9%) of dynamic memory, leaving 29700 bytes for local variables. Maximum is 32768 bytes.

examples/recv

Result: PASS

WARNING: library BTLE claims to run on avr architecture(s) and may be incompatible with your current board which runs on samd architecture(s).
Sketch uses 16152 bytes (6%) of program storage space. Maximum is 262144 bytes.
Global variables use 3164 bytes (9%) of dynamic memory, leaving 29604 bytes for local variables. Maximum is 32768 bytes.

examples/send

Result: PASS

WARNING: library BTLE claims to run on avr architecture(s) and may be incompatible with your current board which runs on samd architecture(s).
Sketch uses 16084 bytes (6%) of program storage space. Maximum is 262144 bytes.
Global variables use 3164 bytes (9%) of dynamic memory, leaving 29604 bytes for local variables. Maximum is 32768 bytes.

examples/temperature

Result: FAIL

WARNING: library BTLE claims to run on avr architecture(s) and may be incompatible with your current board which runs on samd architecture(s).
WARNING: library DHTlib claims to run on avr architecture(s) and may be incompatible with your current board which runs on samd architecture(s).
In file included from /Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/cores/arduino/Arduino.h:51:0,
                 from /Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/DHTlib/dht.h:15,
                 from /Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/DHTlib/dht.cpp:56:
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/DHTlib/dht.cpp: In member function 'int8_t dht::_readSensor(uint8_t, uint8_t, uint8_t)':
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/variants/mkrwifi1010/variant.h:49:35: error: invalid conversion from 'PortGroup*' to 'uint8_t {aka unsigned char}' [-fpermissive]
 #define digitalPinToPort(P)      (&(PORT->Group[g_APinDescription[P].ulPort]))
                                  ~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/DHTlib/dht.cpp:216:20: note: in expansion of macro 'digitalPinToPort'
     uint8_t port = digitalPinToPort(pin);
                    ^~~~~~~~~~~~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/variants/mkrwifi1010/variant.h:53:41: error: base operand of '->' is not a pointer
 #define portInputRegister(port)  (&(port->IN.reg))
                                         ^
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/DHTlib/dht.cpp:217:29: note: in expansion of macro 'portInputRegister'
     volatile uint8_t *PIR = portInputRegister(port);
                             ^~~~~~~~~~~~~~~~~
Multiple libraries were found for "dht.h"
  Used: /Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/DHTlib
  Not used: /Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/UncleRus

esp32:esp32:d1_mini32 @ 1.0.6

Inclusion

Result: PASS

WARNING: library BTLE claims to run on avr architecture(s) and may be incompatible with your current board which runs on esp32 architecture(s).
Sketch uses 200730 bytes (15%) of program storage space. Maximum is 1310720 bytes.
Global variables use 13136 bytes (4%) of dynamic memory, leaving 314544 bytes for local variables. Maximum is 327680 bytes.

examples/recv

Result: PASS

WARNING: library BTLE claims to run on avr architecture(s) and may be incompatible with your current board which runs on esp32 architecture(s).
Sketch uses 212258 bytes (16%) of program storage space. Maximum is 1310720 bytes.
Global variables use 13584 bytes (4%) of dynamic memory, leaving 314096 bytes for local variables. Maximum is 327680 bytes.

examples/send

Result: PASS

WARNING: library BTLE claims to run on avr architecture(s) and may be incompatible with your current board which runs on esp32 architecture(s).
Sketch uses 212310 bytes (16%) of program storage space. Maximum is 1310720 bytes.
Global variables use 13584 bytes (4%) of dynamic memory, leaving 314096 bytes for local variables. Maximum is 327680 bytes.

examples/temperature

Result: FAIL

WARNING: library BTLE claims to run on avr architecture(s) and may be incompatible with your current board which runs on esp32 architecture(s).
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BTLE/examples/temperature/temperature.ino:17:1: error: 'dht' does not name a type
 dht DHT;
 ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BTLE/examples/temperature/temperature.ino: In function 'void loop()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BTLE/examples/temperature/temperature.ino:30:3: error: 'DHT' was not declared in this scope
   DHT.read11(A0);
   ^
Multiple libraries were found for "dht.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/UncleRus
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DHTlib