This report was generated on Wednesday, 23-Feb-22 22:48:15 CET using arduino-testlib.
Version: 1.25
More details
| Board | Claims compatibility | Inclusion | getTime_Location |
httpClientwithUserName |
CheckingNewSMS |
PubNub_Post |
ReadBatteryLevel |
ReceiveSMS |
SendSMS |
SleepMode |
httpClient |
|---|---|---|---|---|---|---|---|---|---|---|---|
|
arduino:avr:uno
1.8.4 |
Yes | PASS | PASS | PASS | PASS | PASS | PASS | PASS | PASS | PASS | PASS |
|
arduino:mbed_nano:nanorp2040connect
2.7.2 |
Yes ⚠️ | FAIL | FAIL | FAIL | FAIL | FAIL | FAIL | FAIL | FAIL | FAIL | FAIL |
|
arduino:megaavr:nona4809
1.8.7 |
Yes ⚠️ | FAIL | FAIL | FAIL | FAIL | FAIL | FAIL | FAIL | FAIL | FAIL | FAIL |
|
arduino:samd:mkrwifi1010
1.8.12 |
Yes ⚠️ | FAIL | FAIL | FAIL | FAIL | FAIL | FAIL | FAIL | FAIL | FAIL | FAIL |
|
esp32:esp32:d1_mini32
1.0.6 |
Yes ⚠️ | FAIL | FAIL | FAIL | FAIL | FAIL | FAIL | FAIL | FAIL | FAIL | FAIL |
Result: PASS
Sketch uses 1504 bytes (4%) of program storage space. Maximum is 32256 bytes. Global variables use 169 bytes (8%) of dynamic memory, leaving 1879 bytes for local variables. Maximum is 2048 bytes.
Result: PASS
Sketch uses 7378 bytes (22%) of program storage space. Maximum is 32256 bytes. Global variables use 730 bytes (35%) of dynamic memory, leaving 1318 bytes for local variables. Maximum is 2048 bytes.
Result: PASS
Sketch uses 12812 bytes (39%) of program storage space. Maximum is 32256 bytes. Global variables use 886 bytes (43%) of dynamic memory, leaving 1162 bytes for local variables. Maximum is 2048 bytes.
Result: PASS
Sketch uses 7114 bytes (22%) of program storage space. Maximum is 32256 bytes. Global variables use 682 bytes (33%) of dynamic memory, leaving 1366 bytes for local variables. Maximum is 2048 bytes.
Result: PASS
Sketch uses 6994 bytes (21%) of program storage space. Maximum is 32256 bytes. Global variables use 666 bytes (32%) of dynamic memory, leaving 1382 bytes for local variables. Maximum is 2048 bytes.
Result: PASS
Sketch uses 6822 bytes (21%) of program storage space. Maximum is 32256 bytes. Global variables use 732 bytes (35%) of dynamic memory, leaving 1316 bytes for local variables. Maximum is 2048 bytes.
Result: PASS
Sketch uses 6958 bytes (21%) of program storage space. Maximum is 32256 bytes. Global variables use 756 bytes (36%) of dynamic memory, leaving 1292 bytes for local variables. Maximum is 2048 bytes.
Result: PASS
Sketch uses 8096 bytes (25%) of program storage space. Maximum is 32256 bytes. Global variables use 720 bytes (35%) of dynamic memory, leaving 1328 bytes for local variables. Maximum is 2048 bytes.
Result: PASS
Sketch uses 8244 bytes (25%) of program storage space. Maximum is 32256 bytes. Global variables use 812 bytes (39%) of dynamic memory, leaving 1236 bytes for local variables. Maximum is 2048 bytes.
Result: PASS
Sketch uses 8276 bytes (25%) of program storage space. Maximum is 32256 bytes. Global variables use 840 bytes (41%) of dynamic memory, leaving 1208 bytes for local variables. Maximum is 2048 bytes.
Result: FAIL
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/BareBoneSim800.h:51:0,
from /tmp/arduino-testlib80559481/test/test.ino:1:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.h: In static member function 'static void AltSoftSerial::begin(uint32_t)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.h:39:25: error: 'F_CPU' was not declared in this scope
#define ALTSS_BASE_FREQ F_CPU
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.h:47:43: note: in expansion of macro 'ALTSS_BASE_FREQ'
static void begin(uint32_t baud) { init((ALTSS_BASE_FREQ + baud / 2) / baud); }
^~~~~~~~~~~~~~~
Result: FAIL
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/BareBoneSim800.h:51:0,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/examples/CheckingNewSMS/CheckingNewSMS.ino:38:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.h: In static member function 'static void AltSoftSerial::begin(uint32_t)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.h:39:25: error: 'F_CPU' was not declared in this scope
#define ALTSS_BASE_FREQ F_CPU
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.h:47:43: note: in expansion of macro 'ALTSS_BASE_FREQ'
static void begin(uint32_t baud) { init((ALTSS_BASE_FREQ + baud / 2) / baud); }
^~~~~~~~~~~~~~~
Result: FAIL
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/BareBoneSim800.h:51:0,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/examples/PubNub_Post/PubNub_Post.ino:41:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.h: In static member function 'static void AltSoftSerial::begin(uint32_t)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.h:39:25: error: 'F_CPU' was not declared in this scope
#define ALTSS_BASE_FREQ F_CPU
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.h:47:43: note: in expansion of macro 'ALTSS_BASE_FREQ'
static void begin(uint32_t baud) { init((ALTSS_BASE_FREQ + baud / 2) / baud); }
^~~~~~~~~~~~~~~
Result: FAIL
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/BareBoneSim800.h:51:0,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/examples/ReadBatteryLevel/ReadBatteryLevel.ino:38:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.h: In static member function 'static void AltSoftSerial::begin(uint32_t)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.h:39:25: error: 'F_CPU' was not declared in this scope
#define ALTSS_BASE_FREQ F_CPU
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.h:47:43: note: in expansion of macro 'ALTSS_BASE_FREQ'
static void begin(uint32_t baud) { init((ALTSS_BASE_FREQ + baud / 2) / baud); }
^~~~~~~~~~~~~~~
Result: FAIL
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/BareBoneSim800.h:51:0,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/examples/ReceiveSMS/ReceiveSMS.ino:38:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.h: In static member function 'static void AltSoftSerial::begin(uint32_t)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.h:39:25: error: 'F_CPU' was not declared in this scope
#define ALTSS_BASE_FREQ F_CPU
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.h:47:43: note: in expansion of macro 'ALTSS_BASE_FREQ'
static void begin(uint32_t baud) { init((ALTSS_BASE_FREQ + baud / 2) / baud); }
^~~~~~~~~~~~~~~
Result: FAIL
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/BareBoneSim800.h:51:0,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/examples/SendSMS/SendSMS.ino:38:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.h: In static member function 'static void AltSoftSerial::begin(uint32_t)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.h:39:25: error: 'F_CPU' was not declared in this scope
#define ALTSS_BASE_FREQ F_CPU
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.h:47:43: note: in expansion of macro 'ALTSS_BASE_FREQ'
static void begin(uint32_t baud) { init((ALTSS_BASE_FREQ + baud / 2) / baud); }
^~~~~~~~~~~~~~~
Result: FAIL
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/BareBoneSim800.h:51:0,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/examples/SleepMode/SleepMode.ino:38:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.h: In static member function 'static void AltSoftSerial::begin(uint32_t)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.h:39:25: error: 'F_CPU' was not declared in this scope
#define ALTSS_BASE_FREQ F_CPU
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.h:47:43: note: in expansion of macro 'ALTSS_BASE_FREQ'
static void begin(uint32_t baud) { init((ALTSS_BASE_FREQ + baud / 2) / baud); }
^~~~~~~~~~~~~~~
Result: FAIL
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/BareBoneSim800.h:51:0,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/examples/getTime_Location/getTime_Location.ino:38:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.h: In static member function 'static void AltSoftSerial::begin(uint32_t)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.h:39:25: error: 'F_CPU' was not declared in this scope
#define ALTSS_BASE_FREQ F_CPU
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.h:47:43: note: in expansion of macro 'ALTSS_BASE_FREQ'
static void begin(uint32_t baud) { init((ALTSS_BASE_FREQ + baud / 2) / baud); }
^~~~~~~~~~~~~~~
Result: FAIL
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/BareBoneSim800.h:51:0,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/examples/httpClient/httpClient.ino:38:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.h: In static member function 'static void AltSoftSerial::begin(uint32_t)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.h:39:25: error: 'F_CPU' was not declared in this scope
#define ALTSS_BASE_FREQ F_CPU
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.h:47:43: note: in expansion of macro 'ALTSS_BASE_FREQ'
static void begin(uint32_t baud) { init((ALTSS_BASE_FREQ + baud / 2) / baud); }
^~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/examples/httpClient/httpClient.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/examples/httpClient/httpClient.ino:76:49: error: invalid conversion from 'const char*' to 'char*' [-fpermissive]
String result = sim800.sendHTTPData(resource);
^
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/examples/httpClient/httpClient.ino:38:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/BareBoneSim800.h:146:10: note: initializing argument 1 of 'arduino::String BareBoneSim800::sendHTTPData(char*)'
String sendHTTPData(char* data);
^~~~~~~~~~~~
Result: FAIL
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/BareBoneSim800.h:51:0,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/examples/httpClientwithUserName/httpClientwithUserName.ino:38:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.h: In static member function 'static void AltSoftSerial::begin(uint32_t)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.h:39:25: error: 'F_CPU' was not declared in this scope
#define ALTSS_BASE_FREQ F_CPU
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.h:47:43: note: in expansion of macro 'ALTSS_BASE_FREQ'
static void begin(uint32_t baud) { init((ALTSS_BASE_FREQ + baud / 2) / baud); }
^~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/examples/httpClientwithUserName/httpClientwithUserName.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/examples/httpClientwithUserName/httpClientwithUserName.ino:76:49: error: invalid conversion from 'const char*' to 'char*' [-fpermissive]
String result = sim800.sendHTTPData(resource);
^
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/examples/httpClientwithUserName/httpClientwithUserName.ino:38:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/BareBoneSim800.h:146:10: note: initializing argument 1 of 'arduino::String BareBoneSim800::sendHTTPData(char*)'
String sendHTTPData(char* data);
^~~~~~~~~~~~
Result: FAIL
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:35:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/config/AltSoftSerial_Boards.h:146:2: error: #error "Please define your board timer and pins"
#error "Please define your board timer and pins"
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp: In static member function 'static void AltSoftSerial::init(uint32_t)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:74:3: error: 'CONFIG_TIMER_NOPRESCALE' was not declared in this scope
CONFIG_TIMER_NOPRESCALE();
^~~~~~~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:79:4: error: 'CONFIG_TIMER_PRESCALE_8' was not declared in this scope
CONFIG_TIMER_PRESCALE_8();
^~~~~~~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:104:10: error: 'INPUT_CAPTURE_PIN' was not declared in this scope
pinMode(INPUT_CAPTURE_PIN, INPUT_PULLUP);
^~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:104:10: note: suggested alternative: 'INPUT_PULLDOWN'
pinMode(INPUT_CAPTURE_PIN, INPUT_PULLUP);
^~~~~~~~~~~~~~~~~
INPUT_PULLDOWN
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:105:15: error: 'OUTPUT_COMPARE_A_PIN' was not declared in this scope
digitalWrite(OUTPUT_COMPARE_A_PIN, HIGH);
^~~~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:113:2: error: 'ENABLE_INT_INPUT_CAPTURE' was not declared in this scope
ENABLE_INT_INPUT_CAPTURE();
^~~~~~~~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp: In static member function 'static void AltSoftSerial::end()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:118:2: error: 'DISABLE_INT_COMPARE_B' was not declared in this scope
DISABLE_INT_COMPARE_B();
^~~~~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:119:2: error: 'DISABLE_INT_INPUT_CAPTURE' was not declared in this scope
DISABLE_INT_INPUT_CAPTURE();
^~~~~~~~~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:122:2: error: 'DISABLE_INT_COMPARE_A' was not declared in this scope
DISABLE_INT_COMPARE_A();
^~~~~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp: In static member function 'static void AltSoftSerial::writeByte(uint8_t)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:147:3: error: 'ENABLE_INT_COMPARE_A' was not declared in this scope
ENABLE_INT_COMPARE_A();
^~~~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:148:3: error: 'CONFIG_MATCH_CLEAR' was not declared in this scope
CONFIG_MATCH_CLEAR();
^~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:149:17: error: 'GET_TIMER_COUNT' was not declared in this scope
SET_COMPARE_A(GET_TIMER_COUNT() + 16);
^~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:149:17: note: suggested alternative: 'PWM_TIMER_COMPARE'
SET_COMPARE_A(GET_TIMER_COUNT() + 16);
^~~~~~~~~~~~~~~
PWM_TIMER_COMPARE
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:149:3: error: 'SET_COMPARE_A' was not declared in this scope
SET_COMPARE_A(GET_TIMER_COUNT() + 16);
^~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp: In function 'void COMPARE_A_INTERRUPT()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:162:11: error: 'GET_COMPARE_A' was not declared in this scope
target = GET_COMPARE_A();
^~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:173:5: error: 'CONFIG_MATCH_SET' was not declared in this scope
CONFIG_MATCH_SET();
^~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:175:5: error: 'CONFIG_MATCH_CLEAR' was not declared in this scope
CONFIG_MATCH_CLEAR();
^~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:177:4: error: 'SET_COMPARE_A' was not declared in this scope
SET_COMPARE_A(target);
^~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:191:4: error: 'SET_COMPARE_A' was not declared in this scope
SET_COMPARE_A(target + ticks_per_bit);
^~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:194:4: error: 'CONFIG_MATCH_NORMAL' was not declared in this scope
CONFIG_MATCH_NORMAL();
^~~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:195:4: error: 'DISABLE_INT_COMPARE_A' was not declared in this scope
DISABLE_INT_COMPARE_A();
^~~~~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:202:3: error: 'CONFIG_MATCH_CLEAR' was not declared in this scope
CONFIG_MATCH_CLEAR();
^~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:204:4: error: 'SET_COMPARE_A' was not declared in this scope
SET_COMPARE_A(target + ticks_per_bit);
^~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:206:18: error: 'GET_TIMER_COUNT' was not declared in this scope
SET_COMPARE_A(GET_TIMER_COUNT() + 16);
^~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:206:18: note: suggested alternative: 'PWM_TIMER_COMPARE'
SET_COMPARE_A(GET_TIMER_COUNT() + 16);
^~~~~~~~~~~~~~~
PWM_TIMER_COMPARE
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:206:4: error: 'SET_COMPARE_A' was not declared in this scope
SET_COMPARE_A(GET_TIMER_COUNT() + 16);
^~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp: In function 'void CAPTURE_INTERRUPT()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:228:12: error: 'GET_INPUT_CAPTURE' was not declared in this scope
capture = GET_INPUT_CAPTURE();
^~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:231:3: error: 'CONFIG_CAPTURE_FALLING_EDGE' was not declared in this scope
CONFIG_CAPTURE_FALLING_EDGE();
^~~~~~~~~~~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:234:3: error: 'CONFIG_CAPTURE_RISING_EDGE' was not declared in this scope
CONFIG_CAPTURE_RISING_EDGE();
^~~~~~~~~~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:241:4: error: 'SET_COMPARE_B' was not declared in this scope
SET_COMPARE_B(end);
^~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:242:4: error: 'ENABLE_INT_COMPARE_B' was not declared in this scope
ENABLE_INT_COMPARE_B();
^~~~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:256:5: error: 'DISABLE_INT_COMPARE_B' was not declared in this scope
DISABLE_INT_COMPARE_B();
^~~~~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:263:5: error: 'CONFIG_CAPTURE_FALLING_EDGE' was not declared in this scope
CONFIG_CAPTURE_FALLING_EDGE();
^~~~~~~~~~~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp: In function 'void COMPARE_B_INTERRUPT()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:279:2: error: 'DISABLE_INT_COMPARE_B' was not declared in this scope
DISABLE_INT_COMPARE_B();
^~~~~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:280:2: error: 'CONFIG_CAPTURE_FALLING_EDGE' was not declared in this scope
CONFIG_CAPTURE_FALLING_EDGE();
^~~~~~~~~~~~~~~~~~~~~~~~~~~
Result: FAIL
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:35:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/config/AltSoftSerial_Boards.h:146:2: error: #error "Please define your board timer and pins"
#error "Please define your board timer and pins"
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp: In static member function 'static void AltSoftSerial::init(uint32_t)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:74:3: error: 'CONFIG_TIMER_NOPRESCALE' was not declared in this scope
CONFIG_TIMER_NOPRESCALE();
^~~~~~~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:79:4: error: 'CONFIG_TIMER_PRESCALE_8' was not declared in this scope
CONFIG_TIMER_PRESCALE_8();
^~~~~~~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:104:10: error: 'INPUT_CAPTURE_PIN' was not declared in this scope
pinMode(INPUT_CAPTURE_PIN, INPUT_PULLUP);
^~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:104:10: note: suggested alternative: 'INPUT_PULLDOWN'
pinMode(INPUT_CAPTURE_PIN, INPUT_PULLUP);
^~~~~~~~~~~~~~~~~
INPUT_PULLDOWN
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:105:15: error: 'OUTPUT_COMPARE_A_PIN' was not declared in this scope
digitalWrite(OUTPUT_COMPARE_A_PIN, HIGH);
^~~~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:113:2: error: 'ENABLE_INT_INPUT_CAPTURE' was not declared in this scope
ENABLE_INT_INPUT_CAPTURE();
^~~~~~~~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp: In static member function 'static void AltSoftSerial::end()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:118:2: error: 'DISABLE_INT_COMPARE_B' was not declared in this scope
DISABLE_INT_COMPARE_B();
^~~~~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:119:2: error: 'DISABLE_INT_INPUT_CAPTURE' was not declared in this scope
DISABLE_INT_INPUT_CAPTURE();
^~~~~~~~~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:122:2: error: 'DISABLE_INT_COMPARE_A' was not declared in this scope
DISABLE_INT_COMPARE_A();
^~~~~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp: In static member function 'static void AltSoftSerial::writeByte(uint8_t)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:147:3: error: 'ENABLE_INT_COMPARE_A' was not declared in this scope
ENABLE_INT_COMPARE_A();
^~~~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:148:3: error: 'CONFIG_MATCH_CLEAR' was not declared in this scope
CONFIG_MATCH_CLEAR();
^~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:149:17: error: 'GET_TIMER_COUNT' was not declared in this scope
SET_COMPARE_A(GET_TIMER_COUNT() + 16);
^~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:149:17: note: suggested alternative: 'PWM_TIMER_COMPARE'
SET_COMPARE_A(GET_TIMER_COUNT() + 16);
^~~~~~~~~~~~~~~
PWM_TIMER_COMPARE
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:149:3: error: 'SET_COMPARE_A' was not declared in this scope
SET_COMPARE_A(GET_TIMER_COUNT() + 16);
^~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp: In function 'void COMPARE_A_INTERRUPT()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:162:11: error: 'GET_COMPARE_A' was not declared in this scope
target = GET_COMPARE_A();
^~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:173:5: error: 'CONFIG_MATCH_SET' was not declared in this scope
CONFIG_MATCH_SET();
^~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:175:5: error: 'CONFIG_MATCH_CLEAR' was not declared in this scope
CONFIG_MATCH_CLEAR();
^~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:177:4: error: 'SET_COMPARE_A' was not declared in this scope
SET_COMPARE_A(target);
^~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:191:4: error: 'SET_COMPARE_A' was not declared in this scope
SET_COMPARE_A(target + ticks_per_bit);
^~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:194:4: error: 'CONFIG_MATCH_NORMAL' was not declared in this scope
CONFIG_MATCH_NORMAL();
^~~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:195:4: error: 'DISABLE_INT_COMPARE_A' was not declared in this scope
DISABLE_INT_COMPARE_A();
^~~~~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:202:3: error: 'CONFIG_MATCH_CLEAR' was not declared in this scope
CONFIG_MATCH_CLEAR();
^~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:204:4: error: 'SET_COMPARE_A' was not declared in this scope
SET_COMPARE_A(target + ticks_per_bit);
^~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:206:18: error: 'GET_TIMER_COUNT' was not declared in this scope
SET_COMPARE_A(GET_TIMER_COUNT() + 16);
^~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:206:18: note: suggested alternative: 'PWM_TIMER_COMPARE'
SET_COMPARE_A(GET_TIMER_COUNT() + 16);
^~~~~~~~~~~~~~~
PWM_TIMER_COMPARE
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:206:4: error: 'SET_COMPARE_A' was not declared in this scope
SET_COMPARE_A(GET_TIMER_COUNT() + 16);
^~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp: In function 'void CAPTURE_INTERRUPT()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:228:12: error: 'GET_INPUT_CAPTURE' was not declared in this scope
capture = GET_INPUT_CAPTURE();
^~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:231:3: error: 'CONFIG_CAPTURE_FALLING_EDGE' was not declared in this scope
CONFIG_CAPTURE_FALLING_EDGE();
^~~~~~~~~~~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:234:3: error: 'CONFIG_CAPTURE_RISING_EDGE' was not declared in this scope
CONFIG_CAPTURE_RISING_EDGE();
^~~~~~~~~~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:241:4: error: 'SET_COMPARE_B' was not declared in this scope
SET_COMPARE_B(end);
^~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:242:4: error: 'ENABLE_INT_COMPARE_B' was not declared in this scope
ENABLE_INT_COMPARE_B();
^~~~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:256:5: error: 'DISABLE_INT_COMPARE_B' was not declared in this scope
DISABLE_INT_COMPARE_B();
^~~~~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:263:5: error: 'CONFIG_CAPTURE_FALLING_EDGE' was not declared in this scope
CONFIG_CAPTURE_FALLING_EDGE();
^~~~~~~~~~~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp: In function 'void COMPARE_B_INTERRUPT()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:279:2: error: 'DISABLE_INT_COMPARE_B' was not declared in this scope
DISABLE_INT_COMPARE_B();
^~~~~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:280:2: error: 'CONFIG_CAPTURE_FALLING_EDGE' was not declared in this scope
CONFIG_CAPTURE_FALLING_EDGE();
^~~~~~~~~~~~~~~~~~~~~~~~~~~
Result: FAIL
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:35:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/config/AltSoftSerial_Boards.h:146:2: error: #error "Please define your board timer and pins"
#error "Please define your board timer and pins"
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp: In static member function 'static void AltSoftSerial::init(uint32_t)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:74:3: error: 'CONFIG_TIMER_NOPRESCALE' was not declared in this scope
CONFIG_TIMER_NOPRESCALE();
^~~~~~~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:79:4: error: 'CONFIG_TIMER_PRESCALE_8' was not declared in this scope
CONFIG_TIMER_PRESCALE_8();
^~~~~~~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:104:10: error: 'INPUT_CAPTURE_PIN' was not declared in this scope
pinMode(INPUT_CAPTURE_PIN, INPUT_PULLUP);
^~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:104:10: note: suggested alternative: 'INPUT_PULLDOWN'
pinMode(INPUT_CAPTURE_PIN, INPUT_PULLUP);
^~~~~~~~~~~~~~~~~
INPUT_PULLDOWN
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:105:15: error: 'OUTPUT_COMPARE_A_PIN' was not declared in this scope
digitalWrite(OUTPUT_COMPARE_A_PIN, HIGH);
^~~~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:113:2: error: 'ENABLE_INT_INPUT_CAPTURE' was not declared in this scope
ENABLE_INT_INPUT_CAPTURE();
^~~~~~~~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp: In static member function 'static void AltSoftSerial::end()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:118:2: error: 'DISABLE_INT_COMPARE_B' was not declared in this scope
DISABLE_INT_COMPARE_B();
^~~~~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:119:2: error: 'DISABLE_INT_INPUT_CAPTURE' was not declared in this scope
DISABLE_INT_INPUT_CAPTURE();
^~~~~~~~~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:122:2: error: 'DISABLE_INT_COMPARE_A' was not declared in this scope
DISABLE_INT_COMPARE_A();
^~~~~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp: In static member function 'static void AltSoftSerial::writeByte(uint8_t)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:147:3: error: 'ENABLE_INT_COMPARE_A' was not declared in this scope
ENABLE_INT_COMPARE_A();
^~~~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:148:3: error: 'CONFIG_MATCH_CLEAR' was not declared in this scope
CONFIG_MATCH_CLEAR();
^~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:149:17: error: 'GET_TIMER_COUNT' was not declared in this scope
SET_COMPARE_A(GET_TIMER_COUNT() + 16);
^~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:149:17: note: suggested alternative: 'PWM_TIMER_COMPARE'
SET_COMPARE_A(GET_TIMER_COUNT() + 16);
^~~~~~~~~~~~~~~
PWM_TIMER_COMPARE
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:149:3: error: 'SET_COMPARE_A' was not declared in this scope
SET_COMPARE_A(GET_TIMER_COUNT() + 16);
^~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp: In function 'void COMPARE_A_INTERRUPT()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:162:11: error: 'GET_COMPARE_A' was not declared in this scope
target = GET_COMPARE_A();
^~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:173:5: error: 'CONFIG_MATCH_SET' was not declared in this scope
CONFIG_MATCH_SET();
^~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:175:5: error: 'CONFIG_MATCH_CLEAR' was not declared in this scope
CONFIG_MATCH_CLEAR();
^~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:177:4: error: 'SET_COMPARE_A' was not declared in this scope
SET_COMPARE_A(target);
^~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:191:4: error: 'SET_COMPARE_A' was not declared in this scope
SET_COMPARE_A(target + ticks_per_bit);
^~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:194:4: error: 'CONFIG_MATCH_NORMAL' was not declared in this scope
CONFIG_MATCH_NORMAL();
^~~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:195:4: error: 'DISABLE_INT_COMPARE_A' was not declared in this scope
DISABLE_INT_COMPARE_A();
^~~~~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:202:3: error: 'CONFIG_MATCH_CLEAR' was not declared in this scope
CONFIG_MATCH_CLEAR();
^~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:204:4: error: 'SET_COMPARE_A' was not declared in this scope
SET_COMPARE_A(target + ticks_per_bit);
^~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:206:18: error: 'GET_TIMER_COUNT' was not declared in this scope
SET_COMPARE_A(GET_TIMER_COUNT() + 16);
^~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:206:18: note: suggested alternative: 'PWM_TIMER_COMPARE'
SET_COMPARE_A(GET_TIMER_COUNT() + 16);
^~~~~~~~~~~~~~~
PWM_TIMER_COMPARE
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:206:4: error: 'SET_COMPARE_A' was not declared in this scope
SET_COMPARE_A(GET_TIMER_COUNT() + 16);
^~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp: In function 'void CAPTURE_INTERRUPT()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:228:12: error: 'GET_INPUT_CAPTURE' was not declared in this scope
capture = GET_INPUT_CAPTURE();
^~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:231:3: error: 'CONFIG_CAPTURE_FALLING_EDGE' was not declared in this scope
CONFIG_CAPTURE_FALLING_EDGE();
^~~~~~~~~~~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:234:3: error: 'CONFIG_CAPTURE_RISING_EDGE' was not declared in this scope
CONFIG_CAPTURE_RISING_EDGE();
^~~~~~~~~~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:241:4: error: 'SET_COMPARE_B' was not declared in this scope
SET_COMPARE_B(end);
^~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:242:4: error: 'ENABLE_INT_COMPARE_B' was not declared in this scope
ENABLE_INT_COMPARE_B();
^~~~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:256:5: error: 'DISABLE_INT_COMPARE_B' was not declared in this scope
DISABLE_INT_COMPARE_B();
^~~~~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:263:5: error: 'CONFIG_CAPTURE_FALLING_EDGE' was not declared in this scope
CONFIG_CAPTURE_FALLING_EDGE();
^~~~~~~~~~~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp: In function 'void COMPARE_B_INTERRUPT()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:279:2: error: 'DISABLE_INT_COMPARE_B' was not declared in this scope
DISABLE_INT_COMPARE_B();
^~~~~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:280:2: error: 'CONFIG_CAPTURE_FALLING_EDGE' was not declared in this scope
CONFIG_CAPTURE_FALLING_EDGE();
^~~~~~~~~~~~~~~~~~~~~~~~~~~
Result: FAIL
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:35:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/config/AltSoftSerial_Boards.h:146:2: error: #error "Please define your board timer and pins"
#error "Please define your board timer and pins"
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp: In static member function 'static void AltSoftSerial::init(uint32_t)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:74:3: error: 'CONFIG_TIMER_NOPRESCALE' was not declared in this scope
CONFIG_TIMER_NOPRESCALE();
^~~~~~~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:79:4: error: 'CONFIG_TIMER_PRESCALE_8' was not declared in this scope
CONFIG_TIMER_PRESCALE_8();
^~~~~~~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:104:10: error: 'INPUT_CAPTURE_PIN' was not declared in this scope
pinMode(INPUT_CAPTURE_PIN, INPUT_PULLUP);
^~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:104:10: note: suggested alternative: 'INPUT_PULLDOWN'
pinMode(INPUT_CAPTURE_PIN, INPUT_PULLUP);
^~~~~~~~~~~~~~~~~
INPUT_PULLDOWN
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:105:15: error: 'OUTPUT_COMPARE_A_PIN' was not declared in this scope
digitalWrite(OUTPUT_COMPARE_A_PIN, HIGH);
^~~~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:113:2: error: 'ENABLE_INT_INPUT_CAPTURE' was not declared in this scope
ENABLE_INT_INPUT_CAPTURE();
^~~~~~~~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp: In static member function 'static void AltSoftSerial::end()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:118:2: error: 'DISABLE_INT_COMPARE_B' was not declared in this scope
DISABLE_INT_COMPARE_B();
^~~~~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:119:2: error: 'DISABLE_INT_INPUT_CAPTURE' was not declared in this scope
DISABLE_INT_INPUT_CAPTURE();
^~~~~~~~~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:122:2: error: 'DISABLE_INT_COMPARE_A' was not declared in this scope
DISABLE_INT_COMPARE_A();
^~~~~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp: In static member function 'static void AltSoftSerial::writeByte(uint8_t)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:147:3: error: 'ENABLE_INT_COMPARE_A' was not declared in this scope
ENABLE_INT_COMPARE_A();
^~~~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:148:3: error: 'CONFIG_MATCH_CLEAR' was not declared in this scope
CONFIG_MATCH_CLEAR();
^~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:149:17: error: 'GET_TIMER_COUNT' was not declared in this scope
SET_COMPARE_A(GET_TIMER_COUNT() + 16);
^~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:149:17: note: suggested alternative: 'PWM_TIMER_COMPARE'
SET_COMPARE_A(GET_TIMER_COUNT() + 16);
^~~~~~~~~~~~~~~
PWM_TIMER_COMPARE
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:149:3: error: 'SET_COMPARE_A' was not declared in this scope
SET_COMPARE_A(GET_TIMER_COUNT() + 16);
^~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp: In function 'void COMPARE_A_INTERRUPT()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:162:11: error: 'GET_COMPARE_A' was not declared in this scope
target = GET_COMPARE_A();
^~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:173:5: error: 'CONFIG_MATCH_SET' was not declared in this scope
CONFIG_MATCH_SET();
^~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:175:5: error: 'CONFIG_MATCH_CLEAR' was not declared in this scope
CONFIG_MATCH_CLEAR();
^~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:177:4: error: 'SET_COMPARE_A' was not declared in this scope
SET_COMPARE_A(target);
^~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:191:4: error: 'SET_COMPARE_A' was not declared in this scope
SET_COMPARE_A(target + ticks_per_bit);
^~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:194:4: error: 'CONFIG_MATCH_NORMAL' was not declared in this scope
CONFIG_MATCH_NORMAL();
^~~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:195:4: error: 'DISABLE_INT_COMPARE_A' was not declared in this scope
DISABLE_INT_COMPARE_A();
^~~~~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:202:3: error: 'CONFIG_MATCH_CLEAR' was not declared in this scope
CONFIG_MATCH_CLEAR();
^~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:204:4: error: 'SET_COMPARE_A' was not declared in this scope
SET_COMPARE_A(target + ticks_per_bit);
^~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:206:18: error: 'GET_TIMER_COUNT' was not declared in this scope
SET_COMPARE_A(GET_TIMER_COUNT() + 16);
^~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:206:18: note: suggested alternative: 'PWM_TIMER_COMPARE'
SET_COMPARE_A(GET_TIMER_COUNT() + 16);
^~~~~~~~~~~~~~~
PWM_TIMER_COMPARE
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:206:4: error: 'SET_COMPARE_A' was not declared in this scope
SET_COMPARE_A(GET_TIMER_COUNT() + 16);
^~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp: In function 'void CAPTURE_INTERRUPT()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:228:12: error: 'GET_INPUT_CAPTURE' was not declared in this scope
capture = GET_INPUT_CAPTURE();
^~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:231:3: error: 'CONFIG_CAPTURE_FALLING_EDGE' was not declared in this scope
CONFIG_CAPTURE_FALLING_EDGE();
^~~~~~~~~~~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:234:3: error: 'CONFIG_CAPTURE_RISING_EDGE' was not declared in this scope
CONFIG_CAPTURE_RISING_EDGE();
^~~~~~~~~~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:241:4: error: 'SET_COMPARE_B' was not declared in this scope
SET_COMPARE_B(end);
^~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:242:4: error: 'ENABLE_INT_COMPARE_B' was not declared in this scope
ENABLE_INT_COMPARE_B();
^~~~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:256:5: error: 'DISABLE_INT_COMPARE_B' was not declared in this scope
DISABLE_INT_COMPARE_B();
^~~~~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:263:5: error: 'CONFIG_CAPTURE_FALLING_EDGE' was not declared in this scope
CONFIG_CAPTURE_FALLING_EDGE();
^~~~~~~~~~~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp: In function 'void COMPARE_B_INTERRUPT()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:279:2: error: 'DISABLE_INT_COMPARE_B' was not declared in this scope
DISABLE_INT_COMPARE_B();
^~~~~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:280:2: error: 'CONFIG_CAPTURE_FALLING_EDGE' was not declared in this scope
CONFIG_CAPTURE_FALLING_EDGE();
^~~~~~~~~~~~~~~~~~~~~~~~~~~
Result: FAIL
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:35:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/config/AltSoftSerial_Boards.h:146:2: error: #error "Please define your board timer and pins"
#error "Please define your board timer and pins"
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp: In static member function 'static void AltSoftSerial::init(uint32_t)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:74:3: error: 'CONFIG_TIMER_NOPRESCALE' was not declared in this scope
CONFIG_TIMER_NOPRESCALE();
^~~~~~~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:79:4: error: 'CONFIG_TIMER_PRESCALE_8' was not declared in this scope
CONFIG_TIMER_PRESCALE_8();
^~~~~~~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:104:10: error: 'INPUT_CAPTURE_PIN' was not declared in this scope
pinMode(INPUT_CAPTURE_PIN, INPUT_PULLUP);
^~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:104:10: note: suggested alternative: 'INPUT_PULLDOWN'
pinMode(INPUT_CAPTURE_PIN, INPUT_PULLUP);
^~~~~~~~~~~~~~~~~
INPUT_PULLDOWN
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:105:15: error: 'OUTPUT_COMPARE_A_PIN' was not declared in this scope
digitalWrite(OUTPUT_COMPARE_A_PIN, HIGH);
^~~~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:113:2: error: 'ENABLE_INT_INPUT_CAPTURE' was not declared in this scope
ENABLE_INT_INPUT_CAPTURE();
^~~~~~~~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp: In static member function 'static void AltSoftSerial::end()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:118:2: error: 'DISABLE_INT_COMPARE_B' was not declared in this scope
DISABLE_INT_COMPARE_B();
^~~~~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:119:2: error: 'DISABLE_INT_INPUT_CAPTURE' was not declared in this scope
DISABLE_INT_INPUT_CAPTURE();
^~~~~~~~~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:122:2: error: 'DISABLE_INT_COMPARE_A' was not declared in this scope
DISABLE_INT_COMPARE_A();
^~~~~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp: In static member function 'static void AltSoftSerial::writeByte(uint8_t)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:147:3: error: 'ENABLE_INT_COMPARE_A' was not declared in this scope
ENABLE_INT_COMPARE_A();
^~~~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:148:3: error: 'CONFIG_MATCH_CLEAR' was not declared in this scope
CONFIG_MATCH_CLEAR();
^~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:149:17: error: 'GET_TIMER_COUNT' was not declared in this scope
SET_COMPARE_A(GET_TIMER_COUNT() + 16);
^~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:149:17: note: suggested alternative: 'PWM_TIMER_COMPARE'
SET_COMPARE_A(GET_TIMER_COUNT() + 16);
^~~~~~~~~~~~~~~
PWM_TIMER_COMPARE
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:149:3: error: 'SET_COMPARE_A' was not declared in this scope
SET_COMPARE_A(GET_TIMER_COUNT() + 16);
^~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp: In function 'void COMPARE_A_INTERRUPT()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:162:11: error: 'GET_COMPARE_A' was not declared in this scope
target = GET_COMPARE_A();
^~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:173:5: error: 'CONFIG_MATCH_SET' was not declared in this scope
CONFIG_MATCH_SET();
^~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:175:5: error: 'CONFIG_MATCH_CLEAR' was not declared in this scope
CONFIG_MATCH_CLEAR();
^~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:177:4: error: 'SET_COMPARE_A' was not declared in this scope
SET_COMPARE_A(target);
^~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:191:4: error: 'SET_COMPARE_A' was not declared in this scope
SET_COMPARE_A(target + ticks_per_bit);
^~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:194:4: error: 'CONFIG_MATCH_NORMAL' was not declared in this scope
CONFIG_MATCH_NORMAL();
^~~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:195:4: error: 'DISABLE_INT_COMPARE_A' was not declared in this scope
DISABLE_INT_COMPARE_A();
^~~~~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:202:3: error: 'CONFIG_MATCH_CLEAR' was not declared in this scope
CONFIG_MATCH_CLEAR();
^~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:204:4: error: 'SET_COMPARE_A' was not declared in this scope
SET_COMPARE_A(target + ticks_per_bit);
^~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:206:18: error: 'GET_TIMER_COUNT' was not declared in this scope
SET_COMPARE_A(GET_TIMER_COUNT() + 16);
^~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:206:18: note: suggested alternative: 'PWM_TIMER_COMPARE'
SET_COMPARE_A(GET_TIMER_COUNT() + 16);
^~~~~~~~~~~~~~~
PWM_TIMER_COMPARE
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:206:4: error: 'SET_COMPARE_A' was not declared in this scope
SET_COMPARE_A(GET_TIMER_COUNT() + 16);
^~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp: In function 'void CAPTURE_INTERRUPT()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:228:12: error: 'GET_INPUT_CAPTURE' was not declared in this scope
capture = GET_INPUT_CAPTURE();
^~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:231:3: error: 'CONFIG_CAPTURE_FALLING_EDGE' was not declared in this scope
CONFIG_CAPTURE_FALLING_EDGE();
^~~~~~~~~~~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:234:3: error: 'CONFIG_CAPTURE_RISING_EDGE' was not declared in this scope
CONFIG_CAPTURE_RISING_EDGE();
^~~~~~~~~~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:241:4: error: 'SET_COMPARE_B' was not declared in this scope
SET_COMPARE_B(end);
^~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:242:4: error: 'ENABLE_INT_COMPARE_B' was not declared in this scope
ENABLE_INT_COMPARE_B();
^~~~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:256:5: error: 'DISABLE_INT_COMPARE_B' was not declared in this scope
DISABLE_INT_COMPARE_B();
^~~~~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:263:5: error: 'CONFIG_CAPTURE_FALLING_EDGE' was not declared in this scope
CONFIG_CAPTURE_FALLING_EDGE();
^~~~~~~~~~~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp: In function 'void COMPARE_B_INTERRUPT()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:279:2: error: 'DISABLE_INT_COMPARE_B' was not declared in this scope
DISABLE_INT_COMPARE_B();
^~~~~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:280:2: error: 'CONFIG_CAPTURE_FALLING_EDGE' was not declared in this scope
CONFIG_CAPTURE_FALLING_EDGE();
^~~~~~~~~~~~~~~~~~~~~~~~~~~
Result: FAIL
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:35:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/config/AltSoftSerial_Boards.h:146:2: error: #error "Please define your board timer and pins"
#error "Please define your board timer and pins"
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp: In static member function 'static void AltSoftSerial::init(uint32_t)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:74:3: error: 'CONFIG_TIMER_NOPRESCALE' was not declared in this scope
CONFIG_TIMER_NOPRESCALE();
^~~~~~~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:79:4: error: 'CONFIG_TIMER_PRESCALE_8' was not declared in this scope
CONFIG_TIMER_PRESCALE_8();
^~~~~~~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:104:10: error: 'INPUT_CAPTURE_PIN' was not declared in this scope
pinMode(INPUT_CAPTURE_PIN, INPUT_PULLUP);
^~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:104:10: note: suggested alternative: 'INPUT_PULLDOWN'
pinMode(INPUT_CAPTURE_PIN, INPUT_PULLUP);
^~~~~~~~~~~~~~~~~
INPUT_PULLDOWN
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:105:15: error: 'OUTPUT_COMPARE_A_PIN' was not declared in this scope
digitalWrite(OUTPUT_COMPARE_A_PIN, HIGH);
^~~~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:113:2: error: 'ENABLE_INT_INPUT_CAPTURE' was not declared in this scope
ENABLE_INT_INPUT_CAPTURE();
^~~~~~~~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp: In static member function 'static void AltSoftSerial::end()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:118:2: error: 'DISABLE_INT_COMPARE_B' was not declared in this scope
DISABLE_INT_COMPARE_B();
^~~~~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:119:2: error: 'DISABLE_INT_INPUT_CAPTURE' was not declared in this scope
DISABLE_INT_INPUT_CAPTURE();
^~~~~~~~~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:122:2: error: 'DISABLE_INT_COMPARE_A' was not declared in this scope
DISABLE_INT_COMPARE_A();
^~~~~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp: In static member function 'static void AltSoftSerial::writeByte(uint8_t)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:147:3: error: 'ENABLE_INT_COMPARE_A' was not declared in this scope
ENABLE_INT_COMPARE_A();
^~~~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:148:3: error: 'CONFIG_MATCH_CLEAR' was not declared in this scope
CONFIG_MATCH_CLEAR();
^~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:149:17: error: 'GET_TIMER_COUNT' was not declared in this scope
SET_COMPARE_A(GET_TIMER_COUNT() + 16);
^~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:149:17: note: suggested alternative: 'PWM_TIMER_COMPARE'
SET_COMPARE_A(GET_TIMER_COUNT() + 16);
^~~~~~~~~~~~~~~
PWM_TIMER_COMPARE
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:149:3: error: 'SET_COMPARE_A' was not declared in this scope
SET_COMPARE_A(GET_TIMER_COUNT() + 16);
^~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp: In function 'void COMPARE_A_INTERRUPT()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:162:11: error: 'GET_COMPARE_A' was not declared in this scope
target = GET_COMPARE_A();
^~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:173:5: error: 'CONFIG_MATCH_SET' was not declared in this scope
CONFIG_MATCH_SET();
^~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:175:5: error: 'CONFIG_MATCH_CLEAR' was not declared in this scope
CONFIG_MATCH_CLEAR();
^~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:177:4: error: 'SET_COMPARE_A' was not declared in this scope
SET_COMPARE_A(target);
^~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:191:4: error: 'SET_COMPARE_A' was not declared in this scope
SET_COMPARE_A(target + ticks_per_bit);
^~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:194:4: error: 'CONFIG_MATCH_NORMAL' was not declared in this scope
CONFIG_MATCH_NORMAL();
^~~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:195:4: error: 'DISABLE_INT_COMPARE_A' was not declared in this scope
DISABLE_INT_COMPARE_A();
^~~~~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:202:3: error: 'CONFIG_MATCH_CLEAR' was not declared in this scope
CONFIG_MATCH_CLEAR();
^~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:204:4: error: 'SET_COMPARE_A' was not declared in this scope
SET_COMPARE_A(target + ticks_per_bit);
^~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:206:18: error: 'GET_TIMER_COUNT' was not declared in this scope
SET_COMPARE_A(GET_TIMER_COUNT() + 16);
^~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:206:18: note: suggested alternative: 'PWM_TIMER_COMPARE'
SET_COMPARE_A(GET_TIMER_COUNT() + 16);
^~~~~~~~~~~~~~~
PWM_TIMER_COMPARE
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:206:4: error: 'SET_COMPARE_A' was not declared in this scope
SET_COMPARE_A(GET_TIMER_COUNT() + 16);
^~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp: In function 'void CAPTURE_INTERRUPT()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:228:12: error: 'GET_INPUT_CAPTURE' was not declared in this scope
capture = GET_INPUT_CAPTURE();
^~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:231:3: error: 'CONFIG_CAPTURE_FALLING_EDGE' was not declared in this scope
CONFIG_CAPTURE_FALLING_EDGE();
^~~~~~~~~~~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:234:3: error: 'CONFIG_CAPTURE_RISING_EDGE' was not declared in this scope
CONFIG_CAPTURE_RISING_EDGE();
^~~~~~~~~~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:241:4: error: 'SET_COMPARE_B' was not declared in this scope
SET_COMPARE_B(end);
^~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:242:4: error: 'ENABLE_INT_COMPARE_B' was not declared in this scope
ENABLE_INT_COMPARE_B();
^~~~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:256:5: error: 'DISABLE_INT_COMPARE_B' was not declared in this scope
DISABLE_INT_COMPARE_B();
^~~~~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:263:5: error: 'CONFIG_CAPTURE_FALLING_EDGE' was not declared in this scope
CONFIG_CAPTURE_FALLING_EDGE();
^~~~~~~~~~~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp: In function 'void COMPARE_B_INTERRUPT()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:279:2: error: 'DISABLE_INT_COMPARE_B' was not declared in this scope
DISABLE_INT_COMPARE_B();
^~~~~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:280:2: error: 'CONFIG_CAPTURE_FALLING_EDGE' was not declared in this scope
CONFIG_CAPTURE_FALLING_EDGE();
^~~~~~~~~~~~~~~~~~~~~~~~~~~
Result: FAIL
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:35:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/config/AltSoftSerial_Boards.h:146:2: error: #error "Please define your board timer and pins"
#error "Please define your board timer and pins"
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp: In static member function 'static void AltSoftSerial::init(uint32_t)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:74:3: error: 'CONFIG_TIMER_NOPRESCALE' was not declared in this scope
CONFIG_TIMER_NOPRESCALE();
^~~~~~~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:79:4: error: 'CONFIG_TIMER_PRESCALE_8' was not declared in this scope
CONFIG_TIMER_PRESCALE_8();
^~~~~~~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:104:10: error: 'INPUT_CAPTURE_PIN' was not declared in this scope
pinMode(INPUT_CAPTURE_PIN, INPUT_PULLUP);
^~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:104:10: note: suggested alternative: 'INPUT_PULLDOWN'
pinMode(INPUT_CAPTURE_PIN, INPUT_PULLUP);
^~~~~~~~~~~~~~~~~
INPUT_PULLDOWN
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:105:15: error: 'OUTPUT_COMPARE_A_PIN' was not declared in this scope
digitalWrite(OUTPUT_COMPARE_A_PIN, HIGH);
^~~~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:113:2: error: 'ENABLE_INT_INPUT_CAPTURE' was not declared in this scope
ENABLE_INT_INPUT_CAPTURE();
^~~~~~~~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp: In static member function 'static void AltSoftSerial::end()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:118:2: error: 'DISABLE_INT_COMPARE_B' was not declared in this scope
DISABLE_INT_COMPARE_B();
^~~~~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:119:2: error: 'DISABLE_INT_INPUT_CAPTURE' was not declared in this scope
DISABLE_INT_INPUT_CAPTURE();
^~~~~~~~~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:122:2: error: 'DISABLE_INT_COMPARE_A' was not declared in this scope
DISABLE_INT_COMPARE_A();
^~~~~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp: In static member function 'static void AltSoftSerial::writeByte(uint8_t)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:147:3: error: 'ENABLE_INT_COMPARE_A' was not declared in this scope
ENABLE_INT_COMPARE_A();
^~~~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:148:3: error: 'CONFIG_MATCH_CLEAR' was not declared in this scope
CONFIG_MATCH_CLEAR();
^~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:149:17: error: 'GET_TIMER_COUNT' was not declared in this scope
SET_COMPARE_A(GET_TIMER_COUNT() + 16);
^~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:149:17: note: suggested alternative: 'PWM_TIMER_COMPARE'
SET_COMPARE_A(GET_TIMER_COUNT() + 16);
^~~~~~~~~~~~~~~
PWM_TIMER_COMPARE
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:149:3: error: 'SET_COMPARE_A' was not declared in this scope
SET_COMPARE_A(GET_TIMER_COUNT() + 16);
^~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp: In function 'void COMPARE_A_INTERRUPT()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:162:11: error: 'GET_COMPARE_A' was not declared in this scope
target = GET_COMPARE_A();
^~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:173:5: error: 'CONFIG_MATCH_SET' was not declared in this scope
CONFIG_MATCH_SET();
^~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:175:5: error: 'CONFIG_MATCH_CLEAR' was not declared in this scope
CONFIG_MATCH_CLEAR();
^~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:177:4: error: 'SET_COMPARE_A' was not declared in this scope
SET_COMPARE_A(target);
^~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:191:4: error: 'SET_COMPARE_A' was not declared in this scope
SET_COMPARE_A(target + ticks_per_bit);
^~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:194:4: error: 'CONFIG_MATCH_NORMAL' was not declared in this scope
CONFIG_MATCH_NORMAL();
^~~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:195:4: error: 'DISABLE_INT_COMPARE_A' was not declared in this scope
DISABLE_INT_COMPARE_A();
^~~~~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:202:3: error: 'CONFIG_MATCH_CLEAR' was not declared in this scope
CONFIG_MATCH_CLEAR();
^~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:204:4: error: 'SET_COMPARE_A' was not declared in this scope
SET_COMPARE_A(target + ticks_per_bit);
^~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:206:18: error: 'GET_TIMER_COUNT' was not declared in this scope
SET_COMPARE_A(GET_TIMER_COUNT() + 16);
^~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:206:18: note: suggested alternative: 'PWM_TIMER_COMPARE'
SET_COMPARE_A(GET_TIMER_COUNT() + 16);
^~~~~~~~~~~~~~~
PWM_TIMER_COMPARE
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:206:4: error: 'SET_COMPARE_A' was not declared in this scope
SET_COMPARE_A(GET_TIMER_COUNT() + 16);
^~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp: In function 'void CAPTURE_INTERRUPT()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:228:12: error: 'GET_INPUT_CAPTURE' was not declared in this scope
capture = GET_INPUT_CAPTURE();
^~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:231:3: error: 'CONFIG_CAPTURE_FALLING_EDGE' was not declared in this scope
CONFIG_CAPTURE_FALLING_EDGE();
^~~~~~~~~~~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:234:3: error: 'CONFIG_CAPTURE_RISING_EDGE' was not declared in this scope
CONFIG_CAPTURE_RISING_EDGE();
^~~~~~~~~~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:241:4: error: 'SET_COMPARE_B' was not declared in this scope
SET_COMPARE_B(end);
^~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:242:4: error: 'ENABLE_INT_COMPARE_B' was not declared in this scope
ENABLE_INT_COMPARE_B();
^~~~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:256:5: error: 'DISABLE_INT_COMPARE_B' was not declared in this scope
DISABLE_INT_COMPARE_B();
^~~~~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:263:5: error: 'CONFIG_CAPTURE_FALLING_EDGE' was not declared in this scope
CONFIG_CAPTURE_FALLING_EDGE();
^~~~~~~~~~~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp: In function 'void COMPARE_B_INTERRUPT()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:279:2: error: 'DISABLE_INT_COMPARE_B' was not declared in this scope
DISABLE_INT_COMPARE_B();
^~~~~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:280:2: error: 'CONFIG_CAPTURE_FALLING_EDGE' was not declared in this scope
CONFIG_CAPTURE_FALLING_EDGE();
^~~~~~~~~~~~~~~~~~~~~~~~~~~
Result: FAIL
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:35:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/config/AltSoftSerial_Boards.h:146:2: error: #error "Please define your board timer and pins"
#error "Please define your board timer and pins"
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp: In static member function 'static void AltSoftSerial::init(uint32_t)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:74:3: error: 'CONFIG_TIMER_NOPRESCALE' was not declared in this scope
CONFIG_TIMER_NOPRESCALE();
^~~~~~~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:79:4: error: 'CONFIG_TIMER_PRESCALE_8' was not declared in this scope
CONFIG_TIMER_PRESCALE_8();
^~~~~~~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:104:10: error: 'INPUT_CAPTURE_PIN' was not declared in this scope
pinMode(INPUT_CAPTURE_PIN, INPUT_PULLUP);
^~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:104:10: note: suggested alternative: 'INPUT_PULLDOWN'
pinMode(INPUT_CAPTURE_PIN, INPUT_PULLUP);
^~~~~~~~~~~~~~~~~
INPUT_PULLDOWN
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:105:15: error: 'OUTPUT_COMPARE_A_PIN' was not declared in this scope
digitalWrite(OUTPUT_COMPARE_A_PIN, HIGH);
^~~~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:113:2: error: 'ENABLE_INT_INPUT_CAPTURE' was not declared in this scope
ENABLE_INT_INPUT_CAPTURE();
^~~~~~~~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp: In static member function 'static void AltSoftSerial::end()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:118:2: error: 'DISABLE_INT_COMPARE_B' was not declared in this scope
DISABLE_INT_COMPARE_B();
^~~~~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:119:2: error: 'DISABLE_INT_INPUT_CAPTURE' was not declared in this scope
DISABLE_INT_INPUT_CAPTURE();
^~~~~~~~~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:122:2: error: 'DISABLE_INT_COMPARE_A' was not declared in this scope
DISABLE_INT_COMPARE_A();
^~~~~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp: In static member function 'static void AltSoftSerial::writeByte(uint8_t)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:147:3: error: 'ENABLE_INT_COMPARE_A' was not declared in this scope
ENABLE_INT_COMPARE_A();
^~~~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:148:3: error: 'CONFIG_MATCH_CLEAR' was not declared in this scope
CONFIG_MATCH_CLEAR();
^~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:149:17: error: 'GET_TIMER_COUNT' was not declared in this scope
SET_COMPARE_A(GET_TIMER_COUNT() + 16);
^~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:149:17: note: suggested alternative: 'PWM_TIMER_COMPARE'
SET_COMPARE_A(GET_TIMER_COUNT() + 16);
^~~~~~~~~~~~~~~
PWM_TIMER_COMPARE
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:149:3: error: 'SET_COMPARE_A' was not declared in this scope
SET_COMPARE_A(GET_TIMER_COUNT() + 16);
^~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp: In function 'void COMPARE_A_INTERRUPT()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:162:11: error: 'GET_COMPARE_A' was not declared in this scope
target = GET_COMPARE_A();
^~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:173:5: error: 'CONFIG_MATCH_SET' was not declared in this scope
CONFIG_MATCH_SET();
^~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:175:5: error: 'CONFIG_MATCH_CLEAR' was not declared in this scope
CONFIG_MATCH_CLEAR();
^~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:177:4: error: 'SET_COMPARE_A' was not declared in this scope
SET_COMPARE_A(target);
^~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:191:4: error: 'SET_COMPARE_A' was not declared in this scope
SET_COMPARE_A(target + ticks_per_bit);
^~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:194:4: error: 'CONFIG_MATCH_NORMAL' was not declared in this scope
CONFIG_MATCH_NORMAL();
^~~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:195:4: error: 'DISABLE_INT_COMPARE_A' was not declared in this scope
DISABLE_INT_COMPARE_A();
^~~~~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:202:3: error: 'CONFIG_MATCH_CLEAR' was not declared in this scope
CONFIG_MATCH_CLEAR();
^~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:204:4: error: 'SET_COMPARE_A' was not declared in this scope
SET_COMPARE_A(target + ticks_per_bit);
^~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:206:18: error: 'GET_TIMER_COUNT' was not declared in this scope
SET_COMPARE_A(GET_TIMER_COUNT() + 16);
^~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:206:18: note: suggested alternative: 'PWM_TIMER_COMPARE'
SET_COMPARE_A(GET_TIMER_COUNT() + 16);
^~~~~~~~~~~~~~~
PWM_TIMER_COMPARE
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:206:4: error: 'SET_COMPARE_A' was not declared in this scope
SET_COMPARE_A(GET_TIMER_COUNT() + 16);
^~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp: In function 'void CAPTURE_INTERRUPT()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:228:12: error: 'GET_INPUT_CAPTURE' was not declared in this scope
capture = GET_INPUT_CAPTURE();
^~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:231:3: error: 'CONFIG_CAPTURE_FALLING_EDGE' was not declared in this scope
CONFIG_CAPTURE_FALLING_EDGE();
^~~~~~~~~~~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:234:3: error: 'CONFIG_CAPTURE_RISING_EDGE' was not declared in this scope
CONFIG_CAPTURE_RISING_EDGE();
^~~~~~~~~~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:241:4: error: 'SET_COMPARE_B' was not declared in this scope
SET_COMPARE_B(end);
^~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:242:4: error: 'ENABLE_INT_COMPARE_B' was not declared in this scope
ENABLE_INT_COMPARE_B();
^~~~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:256:5: error: 'DISABLE_INT_COMPARE_B' was not declared in this scope
DISABLE_INT_COMPARE_B();
^~~~~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:263:5: error: 'CONFIG_CAPTURE_FALLING_EDGE' was not declared in this scope
CONFIG_CAPTURE_FALLING_EDGE();
^~~~~~~~~~~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp: In function 'void COMPARE_B_INTERRUPT()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:279:2: error: 'DISABLE_INT_COMPARE_B' was not declared in this scope
DISABLE_INT_COMPARE_B();
^~~~~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:280:2: error: 'CONFIG_CAPTURE_FALLING_EDGE' was not declared in this scope
CONFIG_CAPTURE_FALLING_EDGE();
^~~~~~~~~~~~~~~~~~~~~~~~~~~
Result: FAIL
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:35:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/config/AltSoftSerial_Boards.h:146:2: error: #error "Please define your board timer and pins"
#error "Please define your board timer and pins"
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp: In static member function 'static void AltSoftSerial::init(uint32_t)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:74:3: error: 'CONFIG_TIMER_NOPRESCALE' was not declared in this scope
CONFIG_TIMER_NOPRESCALE();
^~~~~~~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:79:4: error: 'CONFIG_TIMER_PRESCALE_8' was not declared in this scope
CONFIG_TIMER_PRESCALE_8();
^~~~~~~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:104:10: error: 'INPUT_CAPTURE_PIN' was not declared in this scope
pinMode(INPUT_CAPTURE_PIN, INPUT_PULLUP);
^~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:104:10: note: suggested alternative: 'INPUT_PULLDOWN'
pinMode(INPUT_CAPTURE_PIN, INPUT_PULLUP);
^~~~~~~~~~~~~~~~~
INPUT_PULLDOWN
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:105:15: error: 'OUTPUT_COMPARE_A_PIN' was not declared in this scope
digitalWrite(OUTPUT_COMPARE_A_PIN, HIGH);
^~~~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:113:2: error: 'ENABLE_INT_INPUT_CAPTURE' was not declared in this scope
ENABLE_INT_INPUT_CAPTURE();
^~~~~~~~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp: In static member function 'static void AltSoftSerial::end()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:118:2: error: 'DISABLE_INT_COMPARE_B' was not declared in this scope
DISABLE_INT_COMPARE_B();
^~~~~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:119:2: error: 'DISABLE_INT_INPUT_CAPTURE' was not declared in this scope
DISABLE_INT_INPUT_CAPTURE();
^~~~~~~~~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:122:2: error: 'DISABLE_INT_COMPARE_A' was not declared in this scope
DISABLE_INT_COMPARE_A();
^~~~~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp: In static member function 'static void AltSoftSerial::writeByte(uint8_t)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:147:3: error: 'ENABLE_INT_COMPARE_A' was not declared in this scope
ENABLE_INT_COMPARE_A();
^~~~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:148:3: error: 'CONFIG_MATCH_CLEAR' was not declared in this scope
CONFIG_MATCH_CLEAR();
^~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:149:17: error: 'GET_TIMER_COUNT' was not declared in this scope
SET_COMPARE_A(GET_TIMER_COUNT() + 16);
^~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:149:17: note: suggested alternative: 'PWM_TIMER_COMPARE'
SET_COMPARE_A(GET_TIMER_COUNT() + 16);
^~~~~~~~~~~~~~~
PWM_TIMER_COMPARE
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:149:3: error: 'SET_COMPARE_A' was not declared in this scope
SET_COMPARE_A(GET_TIMER_COUNT() + 16);
^~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp: In function 'void COMPARE_A_INTERRUPT()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:162:11: error: 'GET_COMPARE_A' was not declared in this scope
target = GET_COMPARE_A();
^~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:173:5: error: 'CONFIG_MATCH_SET' was not declared in this scope
CONFIG_MATCH_SET();
^~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:175:5: error: 'CONFIG_MATCH_CLEAR' was not declared in this scope
CONFIG_MATCH_CLEAR();
^~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:177:4: error: 'SET_COMPARE_A' was not declared in this scope
SET_COMPARE_A(target);
^~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:191:4: error: 'SET_COMPARE_A' was not declared in this scope
SET_COMPARE_A(target + ticks_per_bit);
^~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:194:4: error: 'CONFIG_MATCH_NORMAL' was not declared in this scope
CONFIG_MATCH_NORMAL();
^~~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:195:4: error: 'DISABLE_INT_COMPARE_A' was not declared in this scope
DISABLE_INT_COMPARE_A();
^~~~~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:202:3: error: 'CONFIG_MATCH_CLEAR' was not declared in this scope
CONFIG_MATCH_CLEAR();
^~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:204:4: error: 'SET_COMPARE_A' was not declared in this scope
SET_COMPARE_A(target + ticks_per_bit);
^~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:206:18: error: 'GET_TIMER_COUNT' was not declared in this scope
SET_COMPARE_A(GET_TIMER_COUNT() + 16);
^~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:206:18: note: suggested alternative: 'PWM_TIMER_COMPARE'
SET_COMPARE_A(GET_TIMER_COUNT() + 16);
^~~~~~~~~~~~~~~
PWM_TIMER_COMPARE
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:206:4: error: 'SET_COMPARE_A' was not declared in this scope
SET_COMPARE_A(GET_TIMER_COUNT() + 16);
^~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp: In function 'void CAPTURE_INTERRUPT()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:228:12: error: 'GET_INPUT_CAPTURE' was not declared in this scope
capture = GET_INPUT_CAPTURE();
^~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:231:3: error: 'CONFIG_CAPTURE_FALLING_EDGE' was not declared in this scope
CONFIG_CAPTURE_FALLING_EDGE();
^~~~~~~~~~~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:234:3: error: 'CONFIG_CAPTURE_RISING_EDGE' was not declared in this scope
CONFIG_CAPTURE_RISING_EDGE();
^~~~~~~~~~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:241:4: error: 'SET_COMPARE_B' was not declared in this scope
SET_COMPARE_B(end);
^~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:242:4: error: 'ENABLE_INT_COMPARE_B' was not declared in this scope
ENABLE_INT_COMPARE_B();
^~~~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:256:5: error: 'DISABLE_INT_COMPARE_B' was not declared in this scope
DISABLE_INT_COMPARE_B();
^~~~~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:263:5: error: 'CONFIG_CAPTURE_FALLING_EDGE' was not declared in this scope
CONFIG_CAPTURE_FALLING_EDGE();
^~~~~~~~~~~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp: In function 'void COMPARE_B_INTERRUPT()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:279:2: error: 'DISABLE_INT_COMPARE_B' was not declared in this scope
DISABLE_INT_COMPARE_B();
^~~~~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:280:2: error: 'CONFIG_CAPTURE_FALLING_EDGE' was not declared in this scope
CONFIG_CAPTURE_FALLING_EDGE();
^~~~~~~~~~~~~~~~~~~~~~~~~~~
Result: FAIL
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:35:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/config/AltSoftSerial_Boards.h:146:2: error: #error "Please define your board timer and pins"
#error "Please define your board timer and pins"
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp: In static member function 'static void AltSoftSerial::init(uint32_t)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:74:3: error: 'CONFIG_TIMER_NOPRESCALE' was not declared in this scope
CONFIG_TIMER_NOPRESCALE();
^~~~~~~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:79:4: error: 'CONFIG_TIMER_PRESCALE_8' was not declared in this scope
CONFIG_TIMER_PRESCALE_8();
^~~~~~~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:104:10: error: 'INPUT_CAPTURE_PIN' was not declared in this scope
pinMode(INPUT_CAPTURE_PIN, INPUT_PULLUP);
^~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:104:10: note: suggested alternative: 'INPUT_PULLDOWN'
pinMode(INPUT_CAPTURE_PIN, INPUT_PULLUP);
^~~~~~~~~~~~~~~~~
INPUT_PULLDOWN
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:105:15: error: 'OUTPUT_COMPARE_A_PIN' was not declared in this scope
digitalWrite(OUTPUT_COMPARE_A_PIN, HIGH);
^~~~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:113:2: error: 'ENABLE_INT_INPUT_CAPTURE' was not declared in this scope
ENABLE_INT_INPUT_CAPTURE();
^~~~~~~~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp: In static member function 'static void AltSoftSerial::end()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:118:2: error: 'DISABLE_INT_COMPARE_B' was not declared in this scope
DISABLE_INT_COMPARE_B();
^~~~~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:119:2: error: 'DISABLE_INT_INPUT_CAPTURE' was not declared in this scope
DISABLE_INT_INPUT_CAPTURE();
^~~~~~~~~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:122:2: error: 'DISABLE_INT_COMPARE_A' was not declared in this scope
DISABLE_INT_COMPARE_A();
^~~~~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp: In static member function 'static void AltSoftSerial::writeByte(uint8_t)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:147:3: error: 'ENABLE_INT_COMPARE_A' was not declared in this scope
ENABLE_INT_COMPARE_A();
^~~~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:148:3: error: 'CONFIG_MATCH_CLEAR' was not declared in this scope
CONFIG_MATCH_CLEAR();
^~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:149:17: error: 'GET_TIMER_COUNT' was not declared in this scope
SET_COMPARE_A(GET_TIMER_COUNT() + 16);
^~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:149:17: note: suggested alternative: 'PWM_TIMER_COMPARE'
SET_COMPARE_A(GET_TIMER_COUNT() + 16);
^~~~~~~~~~~~~~~
PWM_TIMER_COMPARE
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:149:3: error: 'SET_COMPARE_A' was not declared in this scope
SET_COMPARE_A(GET_TIMER_COUNT() + 16);
^~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp: In function 'void COMPARE_A_INTERRUPT()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:162:11: error: 'GET_COMPARE_A' was not declared in this scope
target = GET_COMPARE_A();
^~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:173:5: error: 'CONFIG_MATCH_SET' was not declared in this scope
CONFIG_MATCH_SET();
^~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:175:5: error: 'CONFIG_MATCH_CLEAR' was not declared in this scope
CONFIG_MATCH_CLEAR();
^~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:177:4: error: 'SET_COMPARE_A' was not declared in this scope
SET_COMPARE_A(target);
^~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:191:4: error: 'SET_COMPARE_A' was not declared in this scope
SET_COMPARE_A(target + ticks_per_bit);
^~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:194:4: error: 'CONFIG_MATCH_NORMAL' was not declared in this scope
CONFIG_MATCH_NORMAL();
^~~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:195:4: error: 'DISABLE_INT_COMPARE_A' was not declared in this scope
DISABLE_INT_COMPARE_A();
^~~~~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:202:3: error: 'CONFIG_MATCH_CLEAR' was not declared in this scope
CONFIG_MATCH_CLEAR();
^~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:204:4: error: 'SET_COMPARE_A' was not declared in this scope
SET_COMPARE_A(target + ticks_per_bit);
^~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:206:18: error: 'GET_TIMER_COUNT' was not declared in this scope
SET_COMPARE_A(GET_TIMER_COUNT() + 16);
^~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:206:18: note: suggested alternative: 'PWM_TIMER_COMPARE'
SET_COMPARE_A(GET_TIMER_COUNT() + 16);
^~~~~~~~~~~~~~~
PWM_TIMER_COMPARE
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:206:4: error: 'SET_COMPARE_A' was not declared in this scope
SET_COMPARE_A(GET_TIMER_COUNT() + 16);
^~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp: In function 'void CAPTURE_INTERRUPT()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:228:12: error: 'GET_INPUT_CAPTURE' was not declared in this scope
capture = GET_INPUT_CAPTURE();
^~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:231:3: error: 'CONFIG_CAPTURE_FALLING_EDGE' was not declared in this scope
CONFIG_CAPTURE_FALLING_EDGE();
^~~~~~~~~~~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:234:3: error: 'CONFIG_CAPTURE_RISING_EDGE' was not declared in this scope
CONFIG_CAPTURE_RISING_EDGE();
^~~~~~~~~~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:241:4: error: 'SET_COMPARE_B' was not declared in this scope
SET_COMPARE_B(end);
^~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:242:4: error: 'ENABLE_INT_COMPARE_B' was not declared in this scope
ENABLE_INT_COMPARE_B();
^~~~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:256:5: error: 'DISABLE_INT_COMPARE_B' was not declared in this scope
DISABLE_INT_COMPARE_B();
^~~~~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:263:5: error: 'CONFIG_CAPTURE_FALLING_EDGE' was not declared in this scope
CONFIG_CAPTURE_FALLING_EDGE();
^~~~~~~~~~~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp: In function 'void COMPARE_B_INTERRUPT()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:279:2: error: 'DISABLE_INT_COMPARE_B' was not declared in this scope
DISABLE_INT_COMPARE_B();
^~~~~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:280:2: error: 'CONFIG_CAPTURE_FALLING_EDGE' was not declared in this scope
CONFIG_CAPTURE_FALLING_EDGE();
^~~~~~~~~~~~~~~~~~~~~~~~~~~
Result: FAIL
In file included from /Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:35:0:
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/config/AltSoftSerial_Boards.h:146:2: error: #error "Please define your board timer and pins"
#error "Please define your board timer and pins"
^~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp: In static member function 'static void AltSoftSerial::init(uint32_t)':
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:74:3: error: 'CONFIG_TIMER_NOPRESCALE' was not declared in this scope
CONFIG_TIMER_NOPRESCALE();
^~~~~~~~~~~~~~~~~~~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:79:4: error: 'CONFIG_TIMER_PRESCALE_8' was not declared in this scope
CONFIG_TIMER_PRESCALE_8();
^~~~~~~~~~~~~~~~~~~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:104:10: error: 'INPUT_CAPTURE_PIN' was not declared in this scope
pinMode(INPUT_CAPTURE_PIN, INPUT_PULLUP);
^~~~~~~~~~~~~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:104:10: note: suggested alternative: 'INPUT_PULLDOWN'
pinMode(INPUT_CAPTURE_PIN, INPUT_PULLUP);
^~~~~~~~~~~~~~~~~
INPUT_PULLDOWN
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:105:15: error: 'OUTPUT_COMPARE_A_PIN' was not declared in this scope
digitalWrite(OUTPUT_COMPARE_A_PIN, HIGH);
^~~~~~~~~~~~~~~~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:113:2: error: 'ENABLE_INT_INPUT_CAPTURE' was not declared in this scope
ENABLE_INT_INPUT_CAPTURE();
^~~~~~~~~~~~~~~~~~~~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp: In static member function 'static void AltSoftSerial::end()':
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:118:2: error: 'DISABLE_INT_COMPARE_B' was not declared in this scope
DISABLE_INT_COMPARE_B();
^~~~~~~~~~~~~~~~~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:119:2: error: 'DISABLE_INT_INPUT_CAPTURE' was not declared in this scope
DISABLE_INT_INPUT_CAPTURE();
^~~~~~~~~~~~~~~~~~~~~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:122:2: error: 'DISABLE_INT_COMPARE_A' was not declared in this scope
DISABLE_INT_COMPARE_A();
^~~~~~~~~~~~~~~~~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp: In static member function 'static void AltSoftSerial::writeByte(uint8_t)':
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:138:15: error: 'SREG' was not declared in this scope
intr_state = SREG;
^~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:138:15: note: suggested alternative: 'SING'
intr_state = SREG;
^~~~
SING
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:139:2: error: 'cli' was not declared in this scope
cli();
^~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:139:2: note: suggested alternative: 'Gclk'
cli();
^~~
Gclk
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:147:3: error: 'ENABLE_INT_COMPARE_A' was not declared in this scope
ENABLE_INT_COMPARE_A();
^~~~~~~~~~~~~~~~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:148:3: error: 'CONFIG_MATCH_CLEAR' was not declared in this scope
CONFIG_MATCH_CLEAR();
^~~~~~~~~~~~~~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:148:3: note: suggested alternative: 'REG_WDT_CLEAR'
CONFIG_MATCH_CLEAR();
^~~~~~~~~~~~~~~~~~
REG_WDT_CLEAR
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:149:17: error: 'GET_TIMER_COUNT' was not declared in this scope
SET_COMPARE_A(GET_TIMER_COUNT() + 16);
^~~~~~~~~~~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:149:17: note: suggested alternative: 'REG_TCC1_COUNT'
SET_COMPARE_A(GET_TIMER_COUNT() + 16);
^~~~~~~~~~~~~~~
REG_TCC1_COUNT
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:149:3: error: 'SET_COMPARE_A' was not declared in this scope
SET_COMPARE_A(GET_TIMER_COUNT() + 16);
^~~~~~~~~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp: At global scope:
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:155:4: error: expected constructor, destructor, or type conversion before '(' token
ISR(COMPARE_A_INTERRUPT)
^
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:222:4: error: expected constructor, destructor, or type conversion before '(' token
ISR(CAPTURE_INTERRUPT)
^
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:275:4: error: expected constructor, destructor, or type conversion before '(' token
ISR(COMPARE_B_INTERRUPT)
^
Result: FAIL
In file included from /Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:35:0:
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/config/AltSoftSerial_Boards.h:146:2: error: #error "Please define your board timer and pins"
#error "Please define your board timer and pins"
^~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp: In static member function 'static void AltSoftSerial::init(uint32_t)':
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:74:3: error: 'CONFIG_TIMER_NOPRESCALE' was not declared in this scope
CONFIG_TIMER_NOPRESCALE();
^~~~~~~~~~~~~~~~~~~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:79:4: error: 'CONFIG_TIMER_PRESCALE_8' was not declared in this scope
CONFIG_TIMER_PRESCALE_8();
^~~~~~~~~~~~~~~~~~~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:104:10: error: 'INPUT_CAPTURE_PIN' was not declared in this scope
pinMode(INPUT_CAPTURE_PIN, INPUT_PULLUP);
^~~~~~~~~~~~~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:104:10: note: suggested alternative: 'INPUT_PULLDOWN'
pinMode(INPUT_CAPTURE_PIN, INPUT_PULLUP);
^~~~~~~~~~~~~~~~~
INPUT_PULLDOWN
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:105:15: error: 'OUTPUT_COMPARE_A_PIN' was not declared in this scope
digitalWrite(OUTPUT_COMPARE_A_PIN, HIGH);
^~~~~~~~~~~~~~~~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:113:2: error: 'ENABLE_INT_INPUT_CAPTURE' was not declared in this scope
ENABLE_INT_INPUT_CAPTURE();
^~~~~~~~~~~~~~~~~~~~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp: In static member function 'static void AltSoftSerial::end()':
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:118:2: error: 'DISABLE_INT_COMPARE_B' was not declared in this scope
DISABLE_INT_COMPARE_B();
^~~~~~~~~~~~~~~~~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:119:2: error: 'DISABLE_INT_INPUT_CAPTURE' was not declared in this scope
DISABLE_INT_INPUT_CAPTURE();
^~~~~~~~~~~~~~~~~~~~~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:122:2: error: 'DISABLE_INT_COMPARE_A' was not declared in this scope
DISABLE_INT_COMPARE_A();
^~~~~~~~~~~~~~~~~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp: In static member function 'static void AltSoftSerial::writeByte(uint8_t)':
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:138:15: error: 'SREG' was not declared in this scope
intr_state = SREG;
^~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:138:15: note: suggested alternative: 'SING'
intr_state = SREG;
^~~~
SING
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:139:2: error: 'cli' was not declared in this scope
cli();
^~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:139:2: note: suggested alternative: 'Gclk'
cli();
^~~
Gclk
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:147:3: error: 'ENABLE_INT_COMPARE_A' was not declared in this scope
ENABLE_INT_COMPARE_A();
^~~~~~~~~~~~~~~~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:148:3: error: 'CONFIG_MATCH_CLEAR' was not declared in this scope
CONFIG_MATCH_CLEAR();
^~~~~~~~~~~~~~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:148:3: note: suggested alternative: 'REG_WDT_CLEAR'
CONFIG_MATCH_CLEAR();
^~~~~~~~~~~~~~~~~~
REG_WDT_CLEAR
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:149:17: error: 'GET_TIMER_COUNT' was not declared in this scope
SET_COMPARE_A(GET_TIMER_COUNT() + 16);
^~~~~~~~~~~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:149:17: note: suggested alternative: 'REG_TCC1_COUNT'
SET_COMPARE_A(GET_TIMER_COUNT() + 16);
^~~~~~~~~~~~~~~
REG_TCC1_COUNT
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:149:3: error: 'SET_COMPARE_A' was not declared in this scope
SET_COMPARE_A(GET_TIMER_COUNT() + 16);
^~~~~~~~~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp: At global scope:
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:155:4: error: expected constructor, destructor, or type conversion before '(' token
ISR(COMPARE_A_INTERRUPT)
^
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:222:4: error: expected constructor, destructor, or type conversion before '(' token
ISR(CAPTURE_INTERRUPT)
^
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:275:4: error: expected constructor, destructor, or type conversion before '(' token
ISR(COMPARE_B_INTERRUPT)
^
Result: FAIL
In file included from /Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:35:0:
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/config/AltSoftSerial_Boards.h:146:2: error: #error "Please define your board timer and pins"
#error "Please define your board timer and pins"
^~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp: In static member function 'static void AltSoftSerial::init(uint32_t)':
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:74:3: error: 'CONFIG_TIMER_NOPRESCALE' was not declared in this scope
CONFIG_TIMER_NOPRESCALE();
^~~~~~~~~~~~~~~~~~~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:79:4: error: 'CONFIG_TIMER_PRESCALE_8' was not declared in this scope
CONFIG_TIMER_PRESCALE_8();
^~~~~~~~~~~~~~~~~~~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:104:10: error: 'INPUT_CAPTURE_PIN' was not declared in this scope
pinMode(INPUT_CAPTURE_PIN, INPUT_PULLUP);
^~~~~~~~~~~~~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:104:10: note: suggested alternative: 'INPUT_PULLDOWN'
pinMode(INPUT_CAPTURE_PIN, INPUT_PULLUP);
^~~~~~~~~~~~~~~~~
INPUT_PULLDOWN
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:105:15: error: 'OUTPUT_COMPARE_A_PIN' was not declared in this scope
digitalWrite(OUTPUT_COMPARE_A_PIN, HIGH);
^~~~~~~~~~~~~~~~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:113:2: error: 'ENABLE_INT_INPUT_CAPTURE' was not declared in this scope
ENABLE_INT_INPUT_CAPTURE();
^~~~~~~~~~~~~~~~~~~~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp: In static member function 'static void AltSoftSerial::end()':
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:118:2: error: 'DISABLE_INT_COMPARE_B' was not declared in this scope
DISABLE_INT_COMPARE_B();
^~~~~~~~~~~~~~~~~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:119:2: error: 'DISABLE_INT_INPUT_CAPTURE' was not declared in this scope
DISABLE_INT_INPUT_CAPTURE();
^~~~~~~~~~~~~~~~~~~~~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:122:2: error: 'DISABLE_INT_COMPARE_A' was not declared in this scope
DISABLE_INT_COMPARE_A();
^~~~~~~~~~~~~~~~~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp: In static member function 'static void AltSoftSerial::writeByte(uint8_t)':
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:138:15: error: 'SREG' was not declared in this scope
intr_state = SREG;
^~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:138:15: note: suggested alternative: 'SING'
intr_state = SREG;
^~~~
SING
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:139:2: error: 'cli' was not declared in this scope
cli();
^~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:139:2: note: suggested alternative: 'Gclk'
cli();
^~~
Gclk
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:147:3: error: 'ENABLE_INT_COMPARE_A' was not declared in this scope
ENABLE_INT_COMPARE_A();
^~~~~~~~~~~~~~~~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:148:3: error: 'CONFIG_MATCH_CLEAR' was not declared in this scope
CONFIG_MATCH_CLEAR();
^~~~~~~~~~~~~~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:148:3: note: suggested alternative: 'REG_WDT_CLEAR'
CONFIG_MATCH_CLEAR();
^~~~~~~~~~~~~~~~~~
REG_WDT_CLEAR
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:149:17: error: 'GET_TIMER_COUNT' was not declared in this scope
SET_COMPARE_A(GET_TIMER_COUNT() + 16);
^~~~~~~~~~~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:149:17: note: suggested alternative: 'REG_TCC1_COUNT'
SET_COMPARE_A(GET_TIMER_COUNT() + 16);
^~~~~~~~~~~~~~~
REG_TCC1_COUNT
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:149:3: error: 'SET_COMPARE_A' was not declared in this scope
SET_COMPARE_A(GET_TIMER_COUNT() + 16);
^~~~~~~~~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp: At global scope:
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:155:4: error: expected constructor, destructor, or type conversion before '(' token
ISR(COMPARE_A_INTERRUPT)
^
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:222:4: error: expected constructor, destructor, or type conversion before '(' token
ISR(CAPTURE_INTERRUPT)
^
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:275:4: error: expected constructor, destructor, or type conversion before '(' token
ISR(COMPARE_B_INTERRUPT)
^
Result: FAIL
In file included from /Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:35:0:
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/config/AltSoftSerial_Boards.h:146:2: error: #error "Please define your board timer and pins"
#error "Please define your board timer and pins"
^~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp: In static member function 'static void AltSoftSerial::init(uint32_t)':
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:74:3: error: 'CONFIG_TIMER_NOPRESCALE' was not declared in this scope
CONFIG_TIMER_NOPRESCALE();
^~~~~~~~~~~~~~~~~~~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:79:4: error: 'CONFIG_TIMER_PRESCALE_8' was not declared in this scope
CONFIG_TIMER_PRESCALE_8();
^~~~~~~~~~~~~~~~~~~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:104:10: error: 'INPUT_CAPTURE_PIN' was not declared in this scope
pinMode(INPUT_CAPTURE_PIN, INPUT_PULLUP);
^~~~~~~~~~~~~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:104:10: note: suggested alternative: 'INPUT_PULLDOWN'
pinMode(INPUT_CAPTURE_PIN, INPUT_PULLUP);
^~~~~~~~~~~~~~~~~
INPUT_PULLDOWN
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:105:15: error: 'OUTPUT_COMPARE_A_PIN' was not declared in this scope
digitalWrite(OUTPUT_COMPARE_A_PIN, HIGH);
^~~~~~~~~~~~~~~~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:113:2: error: 'ENABLE_INT_INPUT_CAPTURE' was not declared in this scope
ENABLE_INT_INPUT_CAPTURE();
^~~~~~~~~~~~~~~~~~~~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp: In static member function 'static void AltSoftSerial::end()':
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:118:2: error: 'DISABLE_INT_COMPARE_B' was not declared in this scope
DISABLE_INT_COMPARE_B();
^~~~~~~~~~~~~~~~~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:119:2: error: 'DISABLE_INT_INPUT_CAPTURE' was not declared in this scope
DISABLE_INT_INPUT_CAPTURE();
^~~~~~~~~~~~~~~~~~~~~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:122:2: error: 'DISABLE_INT_COMPARE_A' was not declared in this scope
DISABLE_INT_COMPARE_A();
^~~~~~~~~~~~~~~~~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp: In static member function 'static void AltSoftSerial::writeByte(uint8_t)':
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:138:15: error: 'SREG' was not declared in this scope
intr_state = SREG;
^~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:138:15: note: suggested alternative: 'SING'
intr_state = SREG;
^~~~
SING
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:139:2: error: 'cli' was not declared in this scope
cli();
^~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:139:2: note: suggested alternative: 'Gclk'
cli();
^~~
Gclk
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:147:3: error: 'ENABLE_INT_COMPARE_A' was not declared in this scope
ENABLE_INT_COMPARE_A();
^~~~~~~~~~~~~~~~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:148:3: error: 'CONFIG_MATCH_CLEAR' was not declared in this scope
CONFIG_MATCH_CLEAR();
^~~~~~~~~~~~~~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:148:3: note: suggested alternative: 'REG_WDT_CLEAR'
CONFIG_MATCH_CLEAR();
^~~~~~~~~~~~~~~~~~
REG_WDT_CLEAR
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:149:17: error: 'GET_TIMER_COUNT' was not declared in this scope
SET_COMPARE_A(GET_TIMER_COUNT() + 16);
^~~~~~~~~~~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:149:17: note: suggested alternative: 'REG_TCC1_COUNT'
SET_COMPARE_A(GET_TIMER_COUNT() + 16);
^~~~~~~~~~~~~~~
REG_TCC1_COUNT
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:149:3: error: 'SET_COMPARE_A' was not declared in this scope
SET_COMPARE_A(GET_TIMER_COUNT() + 16);
^~~~~~~~~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp: At global scope:
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:155:4: error: expected constructor, destructor, or type conversion before '(' token
ISR(COMPARE_A_INTERRUPT)
^
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:222:4: error: expected constructor, destructor, or type conversion before '(' token
ISR(CAPTURE_INTERRUPT)
^
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:275:4: error: expected constructor, destructor, or type conversion before '(' token
ISR(COMPARE_B_INTERRUPT)
^
Result: FAIL
In file included from /Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:35:0:
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/config/AltSoftSerial_Boards.h:146:2: error: #error "Please define your board timer and pins"
#error "Please define your board timer and pins"
^~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp: In static member function 'static void AltSoftSerial::init(uint32_t)':
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:74:3: error: 'CONFIG_TIMER_NOPRESCALE' was not declared in this scope
CONFIG_TIMER_NOPRESCALE();
^~~~~~~~~~~~~~~~~~~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:79:4: error: 'CONFIG_TIMER_PRESCALE_8' was not declared in this scope
CONFIG_TIMER_PRESCALE_8();
^~~~~~~~~~~~~~~~~~~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:104:10: error: 'INPUT_CAPTURE_PIN' was not declared in this scope
pinMode(INPUT_CAPTURE_PIN, INPUT_PULLUP);
^~~~~~~~~~~~~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:104:10: note: suggested alternative: 'INPUT_PULLDOWN'
pinMode(INPUT_CAPTURE_PIN, INPUT_PULLUP);
^~~~~~~~~~~~~~~~~
INPUT_PULLDOWN
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:105:15: error: 'OUTPUT_COMPARE_A_PIN' was not declared in this scope
digitalWrite(OUTPUT_COMPARE_A_PIN, HIGH);
^~~~~~~~~~~~~~~~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:113:2: error: 'ENABLE_INT_INPUT_CAPTURE' was not declared in this scope
ENABLE_INT_INPUT_CAPTURE();
^~~~~~~~~~~~~~~~~~~~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp: In static member function 'static void AltSoftSerial::end()':
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:118:2: error: 'DISABLE_INT_COMPARE_B' was not declared in this scope
DISABLE_INT_COMPARE_B();
^~~~~~~~~~~~~~~~~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:119:2: error: 'DISABLE_INT_INPUT_CAPTURE' was not declared in this scope
DISABLE_INT_INPUT_CAPTURE();
^~~~~~~~~~~~~~~~~~~~~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:122:2: error: 'DISABLE_INT_COMPARE_A' was not declared in this scope
DISABLE_INT_COMPARE_A();
^~~~~~~~~~~~~~~~~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp: In static member function 'static void AltSoftSerial::writeByte(uint8_t)':
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:138:15: error: 'SREG' was not declared in this scope
intr_state = SREG;
^~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:138:15: note: suggested alternative: 'SING'
intr_state = SREG;
^~~~
SING
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:139:2: error: 'cli' was not declared in this scope
cli();
^~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:139:2: note: suggested alternative: 'Gclk'
cli();
^~~
Gclk
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:147:3: error: 'ENABLE_INT_COMPARE_A' was not declared in this scope
ENABLE_INT_COMPARE_A();
^~~~~~~~~~~~~~~~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:148:3: error: 'CONFIG_MATCH_CLEAR' was not declared in this scope
CONFIG_MATCH_CLEAR();
^~~~~~~~~~~~~~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:148:3: note: suggested alternative: 'REG_WDT_CLEAR'
CONFIG_MATCH_CLEAR();
^~~~~~~~~~~~~~~~~~
REG_WDT_CLEAR
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:149:17: error: 'GET_TIMER_COUNT' was not declared in this scope
SET_COMPARE_A(GET_TIMER_COUNT() + 16);
^~~~~~~~~~~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:149:17: note: suggested alternative: 'REG_TCC1_COUNT'
SET_COMPARE_A(GET_TIMER_COUNT() + 16);
^~~~~~~~~~~~~~~
REG_TCC1_COUNT
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:149:3: error: 'SET_COMPARE_A' was not declared in this scope
SET_COMPARE_A(GET_TIMER_COUNT() + 16);
^~~~~~~~~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp: At global scope:
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:155:4: error: expected constructor, destructor, or type conversion before '(' token
ISR(COMPARE_A_INTERRUPT)
^
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:222:4: error: expected constructor, destructor, or type conversion before '(' token
ISR(CAPTURE_INTERRUPT)
^
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:275:4: error: expected constructor, destructor, or type conversion before '(' token
ISR(COMPARE_B_INTERRUPT)
^
Result: FAIL
In file included from /Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:35:0:
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/config/AltSoftSerial_Boards.h:146:2: error: #error "Please define your board timer and pins"
#error "Please define your board timer and pins"
^~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp: In static member function 'static void AltSoftSerial::init(uint32_t)':
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:74:3: error: 'CONFIG_TIMER_NOPRESCALE' was not declared in this scope
CONFIG_TIMER_NOPRESCALE();
^~~~~~~~~~~~~~~~~~~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:79:4: error: 'CONFIG_TIMER_PRESCALE_8' was not declared in this scope
CONFIG_TIMER_PRESCALE_8();
^~~~~~~~~~~~~~~~~~~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:104:10: error: 'INPUT_CAPTURE_PIN' was not declared in this scope
pinMode(INPUT_CAPTURE_PIN, INPUT_PULLUP);
^~~~~~~~~~~~~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:104:10: note: suggested alternative: 'INPUT_PULLDOWN'
pinMode(INPUT_CAPTURE_PIN, INPUT_PULLUP);
^~~~~~~~~~~~~~~~~
INPUT_PULLDOWN
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:105:15: error: 'OUTPUT_COMPARE_A_PIN' was not declared in this scope
digitalWrite(OUTPUT_COMPARE_A_PIN, HIGH);
^~~~~~~~~~~~~~~~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:113:2: error: 'ENABLE_INT_INPUT_CAPTURE' was not declared in this scope
ENABLE_INT_INPUT_CAPTURE();
^~~~~~~~~~~~~~~~~~~~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp: In static member function 'static void AltSoftSerial::end()':
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:118:2: error: 'DISABLE_INT_COMPARE_B' was not declared in this scope
DISABLE_INT_COMPARE_B();
^~~~~~~~~~~~~~~~~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:119:2: error: 'DISABLE_INT_INPUT_CAPTURE' was not declared in this scope
DISABLE_INT_INPUT_CAPTURE();
^~~~~~~~~~~~~~~~~~~~~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:122:2: error: 'DISABLE_INT_COMPARE_A' was not declared in this scope
DISABLE_INT_COMPARE_A();
^~~~~~~~~~~~~~~~~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp: In static member function 'static void AltSoftSerial::writeByte(uint8_t)':
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:138:15: error: 'SREG' was not declared in this scope
intr_state = SREG;
^~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:138:15: note: suggested alternative: 'SING'
intr_state = SREG;
^~~~
SING
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:139:2: error: 'cli' was not declared in this scope
cli();
^~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:139:2: note: suggested alternative: 'Gclk'
cli();
^~~
Gclk
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:147:3: error: 'ENABLE_INT_COMPARE_A' was not declared in this scope
ENABLE_INT_COMPARE_A();
^~~~~~~~~~~~~~~~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:148:3: error: 'CONFIG_MATCH_CLEAR' was not declared in this scope
CONFIG_MATCH_CLEAR();
^~~~~~~~~~~~~~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:148:3: note: suggested alternative: 'REG_WDT_CLEAR'
CONFIG_MATCH_CLEAR();
^~~~~~~~~~~~~~~~~~
REG_WDT_CLEAR
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:149:17: error: 'GET_TIMER_COUNT' was not declared in this scope
SET_COMPARE_A(GET_TIMER_COUNT() + 16);
^~~~~~~~~~~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:149:17: note: suggested alternative: 'REG_TCC1_COUNT'
SET_COMPARE_A(GET_TIMER_COUNT() + 16);
^~~~~~~~~~~~~~~
REG_TCC1_COUNT
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:149:3: error: 'SET_COMPARE_A' was not declared in this scope
SET_COMPARE_A(GET_TIMER_COUNT() + 16);
^~~~~~~~~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp: At global scope:
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:155:4: error: expected constructor, destructor, or type conversion before '(' token
ISR(COMPARE_A_INTERRUPT)
^
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:222:4: error: expected constructor, destructor, or type conversion before '(' token
ISR(CAPTURE_INTERRUPT)
^
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:275:4: error: expected constructor, destructor, or type conversion before '(' token
ISR(COMPARE_B_INTERRUPT)
^
Result: FAIL
In file included from /Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:35:0:
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/config/AltSoftSerial_Boards.h:146:2: error: #error "Please define your board timer and pins"
#error "Please define your board timer and pins"
^~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp: In static member function 'static void AltSoftSerial::init(uint32_t)':
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:74:3: error: 'CONFIG_TIMER_NOPRESCALE' was not declared in this scope
CONFIG_TIMER_NOPRESCALE();
^~~~~~~~~~~~~~~~~~~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:79:4: error: 'CONFIG_TIMER_PRESCALE_8' was not declared in this scope
CONFIG_TIMER_PRESCALE_8();
^~~~~~~~~~~~~~~~~~~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:104:10: error: 'INPUT_CAPTURE_PIN' was not declared in this scope
pinMode(INPUT_CAPTURE_PIN, INPUT_PULLUP);
^~~~~~~~~~~~~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:104:10: note: suggested alternative: 'INPUT_PULLDOWN'
pinMode(INPUT_CAPTURE_PIN, INPUT_PULLUP);
^~~~~~~~~~~~~~~~~
INPUT_PULLDOWN
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:105:15: error: 'OUTPUT_COMPARE_A_PIN' was not declared in this scope
digitalWrite(OUTPUT_COMPARE_A_PIN, HIGH);
^~~~~~~~~~~~~~~~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:113:2: error: 'ENABLE_INT_INPUT_CAPTURE' was not declared in this scope
ENABLE_INT_INPUT_CAPTURE();
^~~~~~~~~~~~~~~~~~~~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp: In static member function 'static void AltSoftSerial::end()':
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:118:2: error: 'DISABLE_INT_COMPARE_B' was not declared in this scope
DISABLE_INT_COMPARE_B();
^~~~~~~~~~~~~~~~~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:119:2: error: 'DISABLE_INT_INPUT_CAPTURE' was not declared in this scope
DISABLE_INT_INPUT_CAPTURE();
^~~~~~~~~~~~~~~~~~~~~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:122:2: error: 'DISABLE_INT_COMPARE_A' was not declared in this scope
DISABLE_INT_COMPARE_A();
^~~~~~~~~~~~~~~~~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp: In static member function 'static void AltSoftSerial::writeByte(uint8_t)':
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:138:15: error: 'SREG' was not declared in this scope
intr_state = SREG;
^~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:138:15: note: suggested alternative: 'SING'
intr_state = SREG;
^~~~
SING
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:139:2: error: 'cli' was not declared in this scope
cli();
^~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:139:2: note: suggested alternative: 'Gclk'
cli();
^~~
Gclk
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:147:3: error: 'ENABLE_INT_COMPARE_A' was not declared in this scope
ENABLE_INT_COMPARE_A();
^~~~~~~~~~~~~~~~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:148:3: error: 'CONFIG_MATCH_CLEAR' was not declared in this scope
CONFIG_MATCH_CLEAR();
^~~~~~~~~~~~~~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:148:3: note: suggested alternative: 'REG_WDT_CLEAR'
CONFIG_MATCH_CLEAR();
^~~~~~~~~~~~~~~~~~
REG_WDT_CLEAR
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:149:17: error: 'GET_TIMER_COUNT' was not declared in this scope
SET_COMPARE_A(GET_TIMER_COUNT() + 16);
^~~~~~~~~~~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:149:17: note: suggested alternative: 'REG_TCC1_COUNT'
SET_COMPARE_A(GET_TIMER_COUNT() + 16);
^~~~~~~~~~~~~~~
REG_TCC1_COUNT
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:149:3: error: 'SET_COMPARE_A' was not declared in this scope
SET_COMPARE_A(GET_TIMER_COUNT() + 16);
^~~~~~~~~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp: At global scope:
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:155:4: error: expected constructor, destructor, or type conversion before '(' token
ISR(COMPARE_A_INTERRUPT)
^
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:222:4: error: expected constructor, destructor, or type conversion before '(' token
ISR(CAPTURE_INTERRUPT)
^
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:275:4: error: expected constructor, destructor, or type conversion before '(' token
ISR(COMPARE_B_INTERRUPT)
^
Result: FAIL
In file included from /Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:35:0:
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/config/AltSoftSerial_Boards.h:146:2: error: #error "Please define your board timer and pins"
#error "Please define your board timer and pins"
^~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp: In static member function 'static void AltSoftSerial::init(uint32_t)':
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:74:3: error: 'CONFIG_TIMER_NOPRESCALE' was not declared in this scope
CONFIG_TIMER_NOPRESCALE();
^~~~~~~~~~~~~~~~~~~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:79:4: error: 'CONFIG_TIMER_PRESCALE_8' was not declared in this scope
CONFIG_TIMER_PRESCALE_8();
^~~~~~~~~~~~~~~~~~~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:104:10: error: 'INPUT_CAPTURE_PIN' was not declared in this scope
pinMode(INPUT_CAPTURE_PIN, INPUT_PULLUP);
^~~~~~~~~~~~~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:104:10: note: suggested alternative: 'INPUT_PULLDOWN'
pinMode(INPUT_CAPTURE_PIN, INPUT_PULLUP);
^~~~~~~~~~~~~~~~~
INPUT_PULLDOWN
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:105:15: error: 'OUTPUT_COMPARE_A_PIN' was not declared in this scope
digitalWrite(OUTPUT_COMPARE_A_PIN, HIGH);
^~~~~~~~~~~~~~~~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:113:2: error: 'ENABLE_INT_INPUT_CAPTURE' was not declared in this scope
ENABLE_INT_INPUT_CAPTURE();
^~~~~~~~~~~~~~~~~~~~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp: In static member function 'static void AltSoftSerial::end()':
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:118:2: error: 'DISABLE_INT_COMPARE_B' was not declared in this scope
DISABLE_INT_COMPARE_B();
^~~~~~~~~~~~~~~~~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:119:2: error: 'DISABLE_INT_INPUT_CAPTURE' was not declared in this scope
DISABLE_INT_INPUT_CAPTURE();
^~~~~~~~~~~~~~~~~~~~~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:122:2: error: 'DISABLE_INT_COMPARE_A' was not declared in this scope
DISABLE_INT_COMPARE_A();
^~~~~~~~~~~~~~~~~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp: In static member function 'static void AltSoftSerial::writeByte(uint8_t)':
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:138:15: error: 'SREG' was not declared in this scope
intr_state = SREG;
^~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:138:15: note: suggested alternative: 'SING'
intr_state = SREG;
^~~~
SING
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:139:2: error: 'cli' was not declared in this scope
cli();
^~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:139:2: note: suggested alternative: 'Gclk'
cli();
^~~
Gclk
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:147:3: error: 'ENABLE_INT_COMPARE_A' was not declared in this scope
ENABLE_INT_COMPARE_A();
^~~~~~~~~~~~~~~~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:148:3: error: 'CONFIG_MATCH_CLEAR' was not declared in this scope
CONFIG_MATCH_CLEAR();
^~~~~~~~~~~~~~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:148:3: note: suggested alternative: 'REG_WDT_CLEAR'
CONFIG_MATCH_CLEAR();
^~~~~~~~~~~~~~~~~~
REG_WDT_CLEAR
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:149:17: error: 'GET_TIMER_COUNT' was not declared in this scope
SET_COMPARE_A(GET_TIMER_COUNT() + 16);
^~~~~~~~~~~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:149:17: note: suggested alternative: 'REG_TCC1_COUNT'
SET_COMPARE_A(GET_TIMER_COUNT() + 16);
^~~~~~~~~~~~~~~
REG_TCC1_COUNT
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:149:3: error: 'SET_COMPARE_A' was not declared in this scope
SET_COMPARE_A(GET_TIMER_COUNT() + 16);
^~~~~~~~~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp: At global scope:
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:155:4: error: expected constructor, destructor, or type conversion before '(' token
ISR(COMPARE_A_INTERRUPT)
^
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:222:4: error: expected constructor, destructor, or type conversion before '(' token
ISR(CAPTURE_INTERRUPT)
^
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/AltSoftSerial.cpp:275:4: error: expected constructor, destructor, or type conversion before '(' token
ISR(COMPARE_B_INTERRUPT)
^
Result: FAIL
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/examples/httpClient/httpClient.ino: In function 'void setup()':
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/examples/httpClient/httpClient.ino:76:49: error: invalid conversion from 'const char*' to 'char*' [-fpermissive]
String result = sim800.sendHTTPData(resource);
^
In file included from /Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/examples/httpClient/httpClient.ino:38:0:
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/BareBoneSim800.h:146:10: note: initializing argument 1 of 'arduino::String BareBoneSim800::sendHTTPData(char*)'
String sendHTTPData(char* data);
^~~~~~~~~~~~
Result: FAIL
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/examples/httpClientwithUserName/httpClientwithUserName.ino: In function 'void setup()':
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/examples/httpClientwithUserName/httpClientwithUserName.ino:76:49: error: invalid conversion from 'const char*' to 'char*' [-fpermissive]
String result = sim800.sendHTTPData(resource);
^
In file included from /Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/examples/httpClientwithUserName/httpClientwithUserName.ino:38:0:
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/BareBoneSim800.h:146:10: note: initializing argument 1 of 'arduino::String BareBoneSim800::sendHTTPData(char*)'
String sendHTTPData(char* data);
^~~~~~~~~~~~
Result: FAIL
Result: FAIL
Result: FAIL
Result: FAIL
Result: FAIL
Result: FAIL
Result: FAIL
Result: FAIL
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/examples/httpClient/httpClient.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/examples/httpClient/httpClient.ino:76:49: error: invalid conversion from 'const char*' to 'char*' [-fpermissive]
String result = sim800.sendHTTPData(resource);
^
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/examples/httpClient/httpClient.ino:38:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/BareBoneSim800.h:146:10: note: initializing argument 1 of 'String BareBoneSim800::sendHTTPData(char*)'
String sendHTTPData(char* data);
^
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/examples/httpClientwithUserName/httpClientwithUserName.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/examples/httpClientwithUserName/httpClientwithUserName.ino:76:49: error: invalid conversion from 'const char*' to 'char*' [-fpermissive]
String result = sim800.sendHTTPData(resource);
^
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/examples/httpClientwithUserName/httpClientwithUserName.ino:38:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800/BareBoneSim800.h:146:10: note: initializing argument 1 of 'String BareBoneSim800::sendHTTPData(char*)'
String sendHTTPData(char* data);
^