This report was generated on Wednesday, 23-Feb-22 22:48:15 CET using arduino-testlib.
Version: 1.1.1
More details
| Board | Claims compatibility | Inclusion | two-encoders |
using-pin-change |
using-timerone |
poll-in-loop |
|---|---|---|---|---|---|---|
|
arduino:avr:uno
1.8.4 |
Yes | PASS | PASS | PASS | PASS | PASS |
|
arduino:mbed_nano:nanorp2040connect
2.7.2 |
Yes ⚠️ | FAIL | FAIL | FAIL | FAIL | FAIL |
|
arduino:megaavr:nona4809
1.8.7 |
Yes | PASS | FAIL | FAIL | FAIL | PASS |
|
arduino:samd:mkrwifi1010
1.8.12 |
Yes ⚠️ | FAIL | FAIL | FAIL | FAIL | FAIL |
|
esp32:esp32:d1_mini32
1.0.6 |
Yes ⚠️ | FAIL | FAIL | FAIL | FAIL | FAIL |
Result: PASS
Sketch uses 444 bytes (1%) of program storage space. Maximum is 32256 bytes. Global variables use 9 bytes (0%) of dynamic memory, leaving 2039 bytes for local variables. Maximum is 2048 bytes.
Result: PASS
Sketch uses 2524 bytes (7%) of program storage space. Maximum is 32256 bytes. Global variables use 198 bytes (9%) of dynamic memory, leaving 1850 bytes for local variables. Maximum is 2048 bytes.
Result: PASS
Sketch uses 2758 bytes (8%) of program storage space. Maximum is 32256 bytes. Global variables use 210 bytes (10%) of dynamic memory, leaving 1838 bytes for local variables. Maximum is 2048 bytes.
Result: PASS
Sketch uses 2760 bytes (8%) of program storage space. Maximum is 32256 bytes. Global variables use 208 bytes (10%) of dynamic memory, leaving 1840 bytes for local variables. Maximum is 2048 bytes.
Result: PASS
Sketch uses 2602 bytes (8%) of program storage space. Maximum is 32256 bytes. Global variables use 200 bytes (9%) of dynamic memory, leaving 1848 bytes for local variables. Maximum is 2048 bytes.
Result: FAIL
In file included from /tmp/arduino-testlib724683167/test/test.ino:1:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BasicEncoder/BasicEncoder.h: In member function 'int8_t BasicEncoder::get_change()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BasicEncoder/BasicEncoder.h:93:20: error: 'SREG' was not declared in this scope
uint8_t sreg = SREG;
^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BasicEncoder/BasicEncoder.h:93:20: note: suggested alternative: 'SING'
uint8_t sreg = SREG;
^~~~
SING
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BasicEncoder/BasicEncoder.h: In member function 'int BasicEncoder::get_count()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BasicEncoder/BasicEncoder.h:116:20: error: 'SREG' was not declared in this scope
uint8_t sreg = SREG;
^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BasicEncoder/BasicEncoder.h:116:20: note: suggested alternative: 'SING'
uint8_t sreg = SREG;
^~~~
SING
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BasicEncoder/BasicEncoder.h: In member function 'void BasicEncoder::reset()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BasicEncoder/BasicEncoder.h:124:20: error: 'SREG' was not declared in this scope
uint8_t sreg = SREG;
^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BasicEncoder/BasicEncoder.h:124:20: note: suggested alternative: 'SING'
uint8_t sreg = SREG;
^~~~
SING
Result: FAIL
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BasicEncoder/examples/poll-in-loop/poll-in-loop.ino:27:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BasicEncoder/BasicEncoder.h: In member function 'int8_t BasicEncoder::get_change()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BasicEncoder/BasicEncoder.h:93:20: error: 'SREG' was not declared in this scope
uint8_t sreg = SREG;
^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BasicEncoder/BasicEncoder.h:93:20: note: suggested alternative: 'SING'
uint8_t sreg = SREG;
^~~~
SING
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BasicEncoder/BasicEncoder.h: In member function 'int BasicEncoder::get_count()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BasicEncoder/BasicEncoder.h:116:20: error: 'SREG' was not declared in this scope
uint8_t sreg = SREG;
^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BasicEncoder/BasicEncoder.h:116:20: note: suggested alternative: 'SING'
uint8_t sreg = SREG;
^~~~
SING
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BasicEncoder/BasicEncoder.h: In member function 'void BasicEncoder::reset()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BasicEncoder/BasicEncoder.h:124:20: error: 'SREG' was not declared in this scope
uint8_t sreg = SREG;
^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BasicEncoder/BasicEncoder.h:124:20: note: suggested alternative: 'SING'
uint8_t sreg = SREG;
^~~~
SING
Result: FAIL
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BasicEncoder/examples/two-encoders/two-encoders.ino:23:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AIStarter/src/TimerOne.h:39:10: fatal error: avr/io.h: No such file or directory
#include <avr/io.h>
^~~~~~~~~~
compilation terminated.
Multiple libraries were found for "TimerOne.h"
Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AIStarter
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TimerOne
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MP3Player
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Volume_3
Result: FAIL
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BasicEncoder/examples/using-pin-change/using-pin-change.ino:25:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BasicEncoder/BasicEncoder.h: In member function 'int8_t BasicEncoder::get_change()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BasicEncoder/BasicEncoder.h:93:20: error: 'SREG' was not declared in this scope
uint8_t sreg = SREG;
^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BasicEncoder/BasicEncoder.h:93:20: note: suggested alternative: 'SING'
uint8_t sreg = SREG;
^~~~
SING
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BasicEncoder/BasicEncoder.h: In member function 'int BasicEncoder::get_count()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BasicEncoder/BasicEncoder.h:116:20: error: 'SREG' was not declared in this scope
uint8_t sreg = SREG;
^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BasicEncoder/BasicEncoder.h:116:20: note: suggested alternative: 'SING'
uint8_t sreg = SREG;
^~~~
SING
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BasicEncoder/BasicEncoder.h: In member function 'void BasicEncoder::reset()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BasicEncoder/BasicEncoder.h:124:20: error: 'SREG' was not declared in this scope
uint8_t sreg = SREG;
^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BasicEncoder/BasicEncoder.h:124:20: note: suggested alternative: 'SING'
uint8_t sreg = SREG;
^~~~
SING
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BasicEncoder/examples/using-pin-change/using-pin-change.ino: At global scope:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BasicEncoder/examples/using-pin-change/using-pin-change.ino:48:5: error: expected constructor, destructor, or type conversion before '(' token
ISR(PCINT2_vect) // pin change interrupt for D0 to D7
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BasicEncoder/examples/using-pin-change/using-pin-change.ino: In function 'void pciSetup(byte)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BasicEncoder/examples/using-pin-change/using-pin-change.ino:34:4: error: 'digitalPinToPCMSK' was not declared in this scope
*digitalPinToPCMSK(pin) |= bit(digitalPinToPCMSKbit(pin)); // enable pin
^~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BasicEncoder/examples/using-pin-change/using-pin-change.ino:34:4: note: suggested alternative: 'digitalPinToPort'
*digitalPinToPCMSK(pin) |= bit(digitalPinToPCMSKbit(pin)); // enable pin
^~~~~~~~~~~~~~~~~
digitalPinToPort
In file included from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/variants/NANO_RP2040_CONNECT/pinmode_arduino.h:30:0,
from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/cores/arduino/Arduino.h:26,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BasicEncoder/examples/using-pin-change/using-pin-change.ino:24:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BasicEncoder/examples/using-pin-change/using-pin-change.ino:34:34: error: 'digitalPinToPCMSKbit' was not declared in this scope
*digitalPinToPCMSK(pin) |= bit(digitalPinToPCMSKbit(pin)); // enable pin
^
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/cores/arduino/api/Common.h:72:25: note: in definition of macro 'bit'
#define bit(b) (1UL << (b))
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BasicEncoder/examples/using-pin-change/using-pin-change.ino:34:34: note: suggested alternative: 'digitalPinToPort'
*digitalPinToPCMSK(pin) |= bit(digitalPinToPCMSKbit(pin)); // enable pin
^
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/cores/arduino/api/Common.h:72:25: note: in definition of macro 'bit'
#define bit(b) (1UL << (b))
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BasicEncoder/examples/using-pin-change/using-pin-change.ino:35:3: error: 'PCIFR' was not declared in this scope
PCIFR |= bit(digitalPinToPCICRbit(pin)); // clear outstanding interrupt
^~~~~
In file included from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/variants/NANO_RP2040_CONNECT/pinmode_arduino.h:30:0,
from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/cores/arduino/Arduino.h:26,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BasicEncoder/examples/using-pin-change/using-pin-change.ino:24:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BasicEncoder/examples/using-pin-change/using-pin-change.ino:35:16: error: 'digitalPinToPCICRbit' was not declared in this scope
PCIFR |= bit(digitalPinToPCICRbit(pin)); // clear outstanding interrupt
^
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/cores/arduino/api/Common.h:72:25: note: in definition of macro 'bit'
#define bit(b) (1UL << (b))
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BasicEncoder/examples/using-pin-change/using-pin-change.ino:35:16: note: suggested alternative: 'digitalPinToPort'
PCIFR |= bit(digitalPinToPCICRbit(pin)); // clear outstanding interrupt
^
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/cores/arduino/api/Common.h:72:25: note: in definition of macro 'bit'
#define bit(b) (1UL << (b))
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BasicEncoder/examples/using-pin-change/using-pin-change.ino:36:3: error: 'PCICR' was not declared in this scope
PCICR |= bit(digitalPinToPCICRbit(pin)); // enable interrupt for group
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BasicEncoder/examples/using-pin-change/using-pin-change.ino: In function 'void setup_encoders(int, int)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BasicEncoder/examples/using-pin-change/using-pin-change.ino:40:22: error: 'SREG' was not declared in this scope
uint8_t old_sreg = SREG;
^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BasicEncoder/examples/using-pin-change/using-pin-change.ino:40:22: note: suggested alternative: 'SING'
uint8_t old_sreg = SREG;
^~~~
SING
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BasicEncoder/examples/using-pin-change/using-pin-change.ino: At global scope:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BasicEncoder/examples/using-pin-change/using-pin-change.ino:48:4: error: expected constructor, destructor, or type conversion before '(' token
ISR(PCINT2_vect) // pin change interrupt for D0 to D7
^
Result: FAIL
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BasicEncoder/examples/using-timerone/using-timerone.ino:27:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AIStarter/src/TimerOne.h:39:10: fatal error: avr/io.h: No such file or directory
#include <avr/io.h>
^~~~~~~~~~
compilation terminated.
Multiple libraries were found for "TimerOne.h"
Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AIStarter
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TimerOne
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MP3Player
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Volume_3
Result: PASS
Sketch uses 802 bytes (1%) of program storage space. Maximum is 49152 bytes. Global variables use 22 bytes (0%) of dynamic memory, leaving 6122 bytes for local variables. Maximum is 6144 bytes.
Result: PASS
Sketch uses 3397 bytes (6%) of program storage space. Maximum is 49152 bytes. Global variables use 187 bytes (3%) of dynamic memory, leaving 5957 bytes for local variables. Maximum is 6144 bytes.
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AIStarter/src/Beep.cpp:1:10: fatal error: arduino.h: No such file or directory
#include "arduino.h"
^~~~~~~~~~~
compilation terminated.
Multiple libraries were found for "TimerOne.h"
Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AIStarter
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TimerOne
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Volume_3
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MP3Player
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BasicEncoder/examples/using-pin-change/using-pin-change.ino: In function 'void pciSetup(byte)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BasicEncoder/examples/using-pin-change/using-pin-change.ino:34:4: error: 'digitalPinToPCMSK' was not declared in this scope
*digitalPinToPCMSK(pin) |= bit(digitalPinToPCMSKbit(pin)); // enable pin
^~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BasicEncoder/examples/using-pin-change/using-pin-change.ino:34:4: note: suggested alternative: 'digitalPinToPort'
*digitalPinToPCMSK(pin) |= bit(digitalPinToPCMSKbit(pin)); // enable pin
^~~~~~~~~~~~~~~~~
digitalPinToPort
In file included from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/cores/arduino/api/Interrupts.h:8:0,
from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/cores/arduino/api/ArduinoAPI.h:29,
from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/cores/arduino/Arduino.h:23,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BasicEncoder/examples/using-pin-change/using-pin-change.ino:24:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BasicEncoder/examples/using-pin-change/using-pin-change.ino:34:34: error: 'digitalPinToPCMSKbit' was not declared in this scope
*digitalPinToPCMSK(pin) |= bit(digitalPinToPCMSKbit(pin)); // enable pin
^
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/cores/arduino/api/Common.h:71:25: note: in definition of macro 'bit'
#define bit(b) (1UL << (b))
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BasicEncoder/examples/using-pin-change/using-pin-change.ino:34:34: note: suggested alternative: 'digitalPinToPort'
*digitalPinToPCMSK(pin) |= bit(digitalPinToPCMSKbit(pin)); // enable pin
^
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/cores/arduino/api/Common.h:71:25: note: in definition of macro 'bit'
#define bit(b) (1UL << (b))
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BasicEncoder/examples/using-pin-change/using-pin-change.ino:35:3: error: 'PCIFR' was not declared in this scope
PCIFR |= bit(digitalPinToPCICRbit(pin)); // clear outstanding interrupt
^~~~~
In file included from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/cores/arduino/api/Interrupts.h:8:0,
from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/cores/arduino/api/ArduinoAPI.h:29,
from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/cores/arduino/Arduino.h:23,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BasicEncoder/examples/using-pin-change/using-pin-change.ino:24:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BasicEncoder/examples/using-pin-change/using-pin-change.ino:35:16: error: 'digitalPinToPCICRbit' was not declared in this scope
PCIFR |= bit(digitalPinToPCICRbit(pin)); // clear outstanding interrupt
^
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/cores/arduino/api/Common.h:71:25: note: in definition of macro 'bit'
#define bit(b) (1UL << (b))
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BasicEncoder/examples/using-pin-change/using-pin-change.ino:35:16: note: suggested alternative: 'digitalPinToPort'
PCIFR |= bit(digitalPinToPCICRbit(pin)); // clear outstanding interrupt
^
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/cores/arduino/api/Common.h:71:25: note: in definition of macro 'bit'
#define bit(b) (1UL << (b))
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BasicEncoder/examples/using-pin-change/using-pin-change.ino:36:3: error: 'PCICR' was not declared in this scope
PCICR |= bit(digitalPinToPCICRbit(pin)); // enable interrupt for group
^~~~~
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AIStarter/src/Beep.cpp:1:10: fatal error: arduino.h: No such file or directory
#include "arduino.h"
^~~~~~~~~~~
compilation terminated.
Multiple libraries were found for "TimerOne.h"
Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AIStarter
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TimerOne
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MP3Player
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Volume_3
Result: FAIL
In file included from /private/tmp/arduino-testlib2002427230/test/test.ino:1:0:
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BasicEncoder/BasicEncoder.h: In member function 'int8_t BasicEncoder::get_change()':
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BasicEncoder/BasicEncoder.h:93:20: error: 'SREG' was not declared in this scope
uint8_t sreg = SREG;
^~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BasicEncoder/BasicEncoder.h:93:20: note: suggested alternative: 'SING'
uint8_t sreg = SREG;
^~~~
SING
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BasicEncoder/BasicEncoder.h: In member function 'int BasicEncoder::get_count()':
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BasicEncoder/BasicEncoder.h:116:20: error: 'SREG' was not declared in this scope
uint8_t sreg = SREG;
^~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BasicEncoder/BasicEncoder.h:116:20: note: suggested alternative: 'SING'
uint8_t sreg = SREG;
^~~~
SING
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BasicEncoder/BasicEncoder.h: In member function 'void BasicEncoder::reset()':
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BasicEncoder/BasicEncoder.h:124:20: error: 'SREG' was not declared in this scope
uint8_t sreg = SREG;
^~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BasicEncoder/BasicEncoder.h:124:20: note: suggested alternative: 'SING'
uint8_t sreg = SREG;
^~~~
SING
Result: FAIL
In file included from /Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BasicEncoder/examples/poll-in-loop/poll-in-loop.ino:27:0:
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BasicEncoder/BasicEncoder.h: In member function 'int8_t BasicEncoder::get_change()':
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BasicEncoder/BasicEncoder.h:93:20: error: 'SREG' was not declared in this scope
uint8_t sreg = SREG;
^~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BasicEncoder/BasicEncoder.h:93:20: note: suggested alternative: 'SING'
uint8_t sreg = SREG;
^~~~
SING
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BasicEncoder/BasicEncoder.h: In member function 'int BasicEncoder::get_count()':
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BasicEncoder/BasicEncoder.h:116:20: error: 'SREG' was not declared in this scope
uint8_t sreg = SREG;
^~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BasicEncoder/BasicEncoder.h:116:20: note: suggested alternative: 'SING'
uint8_t sreg = SREG;
^~~~
SING
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BasicEncoder/BasicEncoder.h: In member function 'void BasicEncoder::reset()':
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BasicEncoder/BasicEncoder.h:124:20: error: 'SREG' was not declared in this scope
uint8_t sreg = SREG;
^~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BasicEncoder/BasicEncoder.h:124:20: note: suggested alternative: 'SING'
uint8_t sreg = SREG;
^~~~
SING
Result: FAIL
In file included from /Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BasicEncoder/examples/two-encoders/two-encoders.ino:23:0:
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/AIStarter/src/TimerOne.h:39:10: fatal error: avr/io.h: No such file or directory
#include <avr/io.h>
^~~~~~~~~~
compilation terminated.
Multiple libraries were found for "TimerOne.h"
Used: /Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/AIStarter
Not used: /Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/TimerOne
Not used: /Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/Volume_3
Not used: /Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/MP3Player
Result: FAIL
In file included from /Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BasicEncoder/examples/using-pin-change/using-pin-change.ino:25:0:
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BasicEncoder/BasicEncoder.h: In member function 'int8_t BasicEncoder::get_change()':
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BasicEncoder/BasicEncoder.h:93:20: error: 'SREG' was not declared in this scope
uint8_t sreg = SREG;
^~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BasicEncoder/BasicEncoder.h:93:20: note: suggested alternative: 'SING'
uint8_t sreg = SREG;
^~~~
SING
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BasicEncoder/BasicEncoder.h: In member function 'int BasicEncoder::get_count()':
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BasicEncoder/BasicEncoder.h:116:20: error: 'SREG' was not declared in this scope
uint8_t sreg = SREG;
^~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BasicEncoder/BasicEncoder.h:116:20: note: suggested alternative: 'SING'
uint8_t sreg = SREG;
^~~~
SING
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BasicEncoder/BasicEncoder.h: In member function 'void BasicEncoder::reset()':
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BasicEncoder/BasicEncoder.h:124:20: error: 'SREG' was not declared in this scope
uint8_t sreg = SREG;
^~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BasicEncoder/BasicEncoder.h:124:20: note: suggested alternative: 'SING'
uint8_t sreg = SREG;
^~~~
SING
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BasicEncoder/examples/using-pin-change/using-pin-change.ino: At global scope:
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BasicEncoder/examples/using-pin-change/using-pin-change.ino:48:5: error: expected constructor, destructor, or type conversion before '(' token
ISR(PCINT2_vect) // pin change interrupt for D0 to D7
^
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BasicEncoder/examples/using-pin-change/using-pin-change.ino: In function 'void pciSetup(byte)':
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BasicEncoder/examples/using-pin-change/using-pin-change.ino:34:4: error: 'digitalPinToPCMSK' was not declared in this scope
*digitalPinToPCMSK(pin) |= bit(digitalPinToPCMSKbit(pin)); // enable pin
^~~~~~~~~~~~~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BasicEncoder/examples/using-pin-change/using-pin-change.ino:34:4: note: suggested alternative: 'digitalPinToPort'
*digitalPinToPCMSK(pin) |= bit(digitalPinToPCMSKbit(pin)); // enable pin
^~~~~~~~~~~~~~~~~
digitalPinToPort
In file included from /Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/cores/arduino/api/Interrupts.h:8:0,
from /Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/cores/arduino/api/ArduinoAPI.h:29,
from /Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/cores/arduino/Arduino.h:23,
from /Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BasicEncoder/examples/using-pin-change/using-pin-change.ino:24:
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BasicEncoder/examples/using-pin-change/using-pin-change.ino:34:34: error: 'digitalPinToPCMSKbit' was not declared in this scope
*digitalPinToPCMSK(pin) |= bit(digitalPinToPCMSKbit(pin)); // enable pin
^
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/cores/arduino/api/Common.h:71:25: note: in definition of macro 'bit'
#define bit(b) (1UL << (b))
^
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BasicEncoder/examples/using-pin-change/using-pin-change.ino:34:34: note: suggested alternative: 'digitalPinToPort'
*digitalPinToPCMSK(pin) |= bit(digitalPinToPCMSKbit(pin)); // enable pin
^
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/cores/arduino/api/Common.h:71:25: note: in definition of macro 'bit'
#define bit(b) (1UL << (b))
^
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BasicEncoder/examples/using-pin-change/using-pin-change.ino:35:3: error: 'PCIFR' was not declared in this scope
PCIFR |= bit(digitalPinToPCICRbit(pin)); // clear outstanding interrupt
^~~~~
In file included from /Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/cores/arduino/api/Interrupts.h:8:0,
from /Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/cores/arduino/api/ArduinoAPI.h:29,
from /Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/cores/arduino/Arduino.h:23,
from /Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BasicEncoder/examples/using-pin-change/using-pin-change.ino:24:
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BasicEncoder/examples/using-pin-change/using-pin-change.ino:35:16: error: 'digitalPinToPCICRbit' was not declared in this scope
PCIFR |= bit(digitalPinToPCICRbit(pin)); // clear outstanding interrupt
^
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/cores/arduino/api/Common.h:71:25: note: in definition of macro 'bit'
#define bit(b) (1UL << (b))
^
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BasicEncoder/examples/using-pin-change/using-pin-change.ino:35:16: note: suggested alternative: 'digitalPinToPort'
PCIFR |= bit(digitalPinToPCICRbit(pin)); // clear outstanding interrupt
^
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/cores/arduino/api/Common.h:71:25: note: in definition of macro 'bit'
#define bit(b) (1UL << (b))
^
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BasicEncoder/examples/using-pin-change/using-pin-change.ino:36:3: error: 'PCICR' was not declared in this scope
PCICR |= bit(digitalPinToPCICRbit(pin)); // enable interrupt for group
^~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BasicEncoder/examples/using-pin-change/using-pin-change.ino: In function 'void setup_encoders(int, int)':
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BasicEncoder/examples/using-pin-change/using-pin-change.ino:40:22: error: 'SREG' was not declared in this scope
uint8_t old_sreg = SREG;
^~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BasicEncoder/examples/using-pin-change/using-pin-change.ino:40:22: note: suggested alternative: 'SING'
uint8_t old_sreg = SREG;
^~~~
SING
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BasicEncoder/examples/using-pin-change/using-pin-change.ino: At global scope:
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BasicEncoder/examples/using-pin-change/using-pin-change.ino:48:4: error: expected constructor, destructor, or type conversion before '(' token
ISR(PCINT2_vect) // pin change interrupt for D0 to D7
^
Result: FAIL
In file included from /Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BasicEncoder/examples/using-timerone/using-timerone.ino:27:0:
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/AIStarter/src/TimerOne.h:39:10: fatal error: avr/io.h: No such file or directory
#include <avr/io.h>
^~~~~~~~~~
compilation terminated.
Multiple libraries were found for "TimerOne.h"
Used: /Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/AIStarter
Not used: /Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/MP3Player
Not used: /Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/TimerOne
Not used: /Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/Volume_3
Result: FAIL
In file included from /tmp/arduino-testlib1836426706/test/test.ino:1:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BasicEncoder/BasicEncoder.h: In member function 'int8_t BasicEncoder::get_change()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BasicEncoder/BasicEncoder.h:93:20: error: 'SREG' was not declared in this scope
uint8_t sreg = SREG;
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BasicEncoder/BasicEncoder.h: In member function 'int BasicEncoder::get_count()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BasicEncoder/BasicEncoder.h:116:20: error: 'SREG' was not declared in this scope
uint8_t sreg = SREG;
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BasicEncoder/BasicEncoder.h: In member function 'void BasicEncoder::reset()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BasicEncoder/BasicEncoder.h:124:20: error: 'SREG' was not declared in this scope
uint8_t sreg = SREG;
^
Result: FAIL
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BasicEncoder/examples/poll-in-loop/poll-in-loop.ino:27:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BasicEncoder/BasicEncoder.h: In member function 'int8_t BasicEncoder::get_change()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BasicEncoder/BasicEncoder.h:93:20: error: 'SREG' was not declared in this scope
uint8_t sreg = SREG;
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BasicEncoder/BasicEncoder.h: In member function 'int BasicEncoder::get_count()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BasicEncoder/BasicEncoder.h:116:20: error: 'SREG' was not declared in this scope
uint8_t sreg = SREG;
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BasicEncoder/BasicEncoder.h: In member function 'void BasicEncoder::reset()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BasicEncoder/BasicEncoder.h:124:20: error: 'SREG' was not declared in this scope
uint8_t sreg = SREG;
^
Result: FAIL
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BasicEncoder/examples/two-encoders/two-encoders.ino:23:0: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AIStarter/src/TimerOne.h:39:20: fatal error: avr/io.h: No such file or directory compilation terminated. Multiple libraries were found for "TimerOne.h" Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AIStarter Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TimerOne Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MP3Player Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Volume_3
Result: FAIL
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BasicEncoder/examples/using-pin-change/using-pin-change.ino:25:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BasicEncoder/BasicEncoder.h: In member function 'int8_t BasicEncoder::get_change()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BasicEncoder/BasicEncoder.h:93:20: error: 'SREG' was not declared in this scope
uint8_t sreg = SREG;
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BasicEncoder/BasicEncoder.h: In member function 'int BasicEncoder::get_count()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BasicEncoder/BasicEncoder.h:116:20: error: 'SREG' was not declared in this scope
uint8_t sreg = SREG;
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BasicEncoder/BasicEncoder.h: In member function 'void BasicEncoder::reset()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BasicEncoder/BasicEncoder.h:124:20: error: 'SREG' was not declared in this scope
uint8_t sreg = SREG;
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BasicEncoder/examples/using-pin-change/using-pin-change.ino: At global scope:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BasicEncoder/examples/using-pin-change/using-pin-change.ino:48:5: error: expected constructor, destructor, or type conversion before '(' token
ISR(PCINT2_vect) // pin change interrupt for D0 to D7
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BasicEncoder/examples/using-pin-change/using-pin-change.ino: In function 'void pciSetup(byte)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BasicEncoder/examples/using-pin-change/using-pin-change.ino:34:25: error: 'digitalPinToPCMSK' was not declared in this scope
*digitalPinToPCMSK(pin) |= bit(digitalPinToPCMSKbit(pin)); // enable pin
^
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BasicEncoder/examples/using-pin-change/using-pin-change.ino:24:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BasicEncoder/examples/using-pin-change/using-pin-change.ino:34:58: error: 'digitalPinToPCMSKbit' was not declared in this scope
*digitalPinToPCMSK(pin) |= bit(digitalPinToPCMSKbit(pin)); // enable pin
^
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/esp32/hardware/esp32/1.0.6/cores/esp32/Arduino.h:98:25: note: in definition of macro 'bit'
#define bit(b) (1UL << (b))
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BasicEncoder/examples/using-pin-change/using-pin-change.ino:35:3: error: 'PCIFR' was not declared in this scope
PCIFR |= bit(digitalPinToPCICRbit(pin)); // clear outstanding interrupt
^
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BasicEncoder/examples/using-pin-change/using-pin-change.ino:24:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BasicEncoder/examples/using-pin-change/using-pin-change.ino:35:40: error: 'digitalPinToPCICRbit' was not declared in this scope
PCIFR |= bit(digitalPinToPCICRbit(pin)); // clear outstanding interrupt
^
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/esp32/hardware/esp32/1.0.6/cores/esp32/Arduino.h:98:25: note: in definition of macro 'bit'
#define bit(b) (1UL << (b))
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BasicEncoder/examples/using-pin-change/using-pin-change.ino:36:3: error: 'PCICR' was not declared in this scope
PCICR |= bit(digitalPinToPCICRbit(pin)); // enable interrupt for group
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BasicEncoder/examples/using-pin-change/using-pin-change.ino: In function 'void setup_encoders(int, int)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BasicEncoder/examples/using-pin-change/using-pin-change.ino:40:22: error: 'SREG' was not declared in this scope
uint8_t old_sreg = SREG;
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BasicEncoder/examples/using-pin-change/using-pin-change.ino: At global scope:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BasicEncoder/examples/using-pin-change/using-pin-change.ino:48:4: error: expected constructor, destructor, or type conversion before '(' token
ISR(PCINT2_vect) // pin change interrupt for D0 to D7
^
Result: FAIL
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BasicEncoder/examples/using-timerone/using-timerone.ino:27:0: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AIStarter/src/TimerOne.h:39:20: fatal error: avr/io.h: No such file or directory compilation terminated. Multiple libraries were found for "TimerOne.h" Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AIStarter Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MP3Player Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Volume_3 Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TimerOne