BlueDot BME280 Library - compatibility matrix

This report was generated on Wednesday, 23-Feb-22 22:48:15 CET using arduino-testlib.

BlueDot BME280 Library

Version: 1.0.9
More details

Compatibility matrix

Board	Claims compatibility	Inclusion	BME280_MultipleSensorsI2C	BME280_MultipleSensorsSPI	BME280_WeatherStation
arduino:avr:uno 1.8.4	Yes ⚠️	FAIL	PASS	PASS	PASS
arduino:mbed_nano:nanorp2040connect 2.7.2	Yes ⚠️	FAIL	FAIL	FAIL	FAIL
arduino:megaavr:nona4809 1.8.7	Yes ⚠️	FAIL	PASS	PASS	PASS
arduino:samd:mkrwifi1010 1.8.12	Yes ⚠️	FAIL	PASS	PASS	PASS
esp32:esp32:d1_mini32 1.0.6	Yes ⚠️	FAIL	PASS	PASS	PASS

Compilation logs

arduino:avr:uno @ 1.8.4

Inclusion

Result: FAIL
This library has no main header file so an empty one was created.

/tmp/arduino-testlib1960933076/test/test.ino:1:10: fatal error: BlueDot_BME280_Library.h: No such file or directory
 #include <BlueDot_BME280_Library.h>
          ^~~~~~~~~~~~~~~~~~~~~~~~~~
compilation terminated.

examples/BME280_MultipleSensorsI2C

Result: PASS

Sketch uses 13688 bytes (42%) of program storage space. Maximum is 32256 bytes.
Global variables use 529 bytes (25%) of dynamic memory, leaving 1519 bytes for local variables. Maximum is 2048 bytes.
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BlueDot_BME280_Library/BlueDot_BME280.h:9:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BlueDot_BME280_Library/BlueDot_BME280.cpp:10:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/avr/1.8.4/libraries/Wire/src/Wire.h: In member function 'uint8_t BlueDot_BME280::readByte(byte)':
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/avr/1.8.4/libraries/Wire/src/Wire.h:68:13: note: candidate 1: uint8_t TwoWire::requestFrom(int, int)
     uint8_t requestFrom(int, int);
             ^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/avr/1.8.4/libraries/Wire/src/Wire.h:65:13: note: candidate 2: uint8_t TwoWire::requestFrom(uint8_t, uint8_t)
     uint8_t requestFrom(uint8_t, uint8_t);
             ^~~~~~~~~~~

examples/BME280_MultipleSensorsSPI

Result: PASS

Sketch uses 15548 bytes (48%) of program storage space. Maximum is 32256 bytes.
Global variables use 641 bytes (31%) of dynamic memory, leaving 1407 bytes for local variables. Maximum is 2048 bytes.
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BlueDot_BME280_Library/BlueDot_BME280.h:9:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BlueDot_BME280_Library/BlueDot_BME280.cpp:10:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/avr/1.8.4/libraries/Wire/src/Wire.h: In member function 'uint8_t BlueDot_BME280::readByte(byte)':
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/avr/1.8.4/libraries/Wire/src/Wire.h:68:13: note: candidate 1: uint8_t TwoWire::requestFrom(int, int)
     uint8_t requestFrom(int, int);
             ^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/avr/1.8.4/libraries/Wire/src/Wire.h:65:13: note: candidate 2: uint8_t TwoWire::requestFrom(uint8_t, uint8_t)
     uint8_t requestFrom(uint8_t, uint8_t);
             ^~~~~~~~~~~

examples/BME280_WeatherStation

Result: PASS

Sketch uses 13358 bytes (41%) of program storage space. Maximum is 32256 bytes.
Global variables use 470 bytes (22%) of dynamic memory, leaving 1578 bytes for local variables. Maximum is 2048 bytes.
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BlueDot_BME280_Library/BlueDot_BME280.h:9:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BlueDot_BME280_Library/BlueDot_BME280.cpp:10:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/avr/1.8.4/libraries/Wire/src/Wire.h: In member function 'uint8_t BlueDot_BME280::readByte(byte)':
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/avr/1.8.4/libraries/Wire/src/Wire.h:68:13: note: candidate 1: uint8_t TwoWire::requestFrom(int, int)
     uint8_t requestFrom(int, int);
             ^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/avr/1.8.4/libraries/Wire/src/Wire.h:65:13: note: candidate 2: uint8_t TwoWire::requestFrom(uint8_t, uint8_t)
     uint8_t requestFrom(uint8_t, uint8_t);
             ^~~~~~~~~~~

arduino:mbed_nano:nanorp2040connect @ 2.7.2

Inclusion

Result: FAIL
This library has no main header file so an empty one was created.

/tmp/arduino-testlib2757593578/test/test.ino:1:10: fatal error: BlueDot_BME280_Library.h: No such file or directory
 #include <BlueDot_BME280_Library.h>
          ^~~~~~~~~~~~~~~~~~~~~~~~~~
compilation terminated.

examples/BME280_MultipleSensorsI2C

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BlueDot_BME280_Library/BlueDot_BME280.cpp: In member function 'uint8_t BlueDot_BME280::init()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BlueDot_BME280_Library/BlueDot_BME280.cpp:58:7: error: 'class arduino::MbedSPI' has no member named 'setBitOrder'
   SPI.setBitOrder(MSBFIRST);        //Most significant Bit first
       ^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BlueDot_BME280_Library/BlueDot_BME280.cpp:59:7: error: 'class arduino::MbedSPI' has no member named 'setClockDivider'
   SPI.setClockDivider(SPI_CLOCK_DIV4);     //Sets SPI clock to 1/4th of the system clock (i.e. 4000 kHz for Arduino Uno)
       ^~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BlueDot_BME280_Library/BlueDot_BME280.cpp:59:23: error: 'SPI_CLOCK_DIV4' was not declared in this scope
   SPI.setClockDivider(SPI_CLOCK_DIV4);     //Sets SPI clock to 1/4th of the system clock (i.e. 4000 kHz for Arduino Uno)
                       ^~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BlueDot_BME280_Library/BlueDot_BME280.cpp:59:23: note: suggested alternative: 'SPI_CPOL_1'
   SPI.setClockDivider(SPI_CLOCK_DIV4);     //Sets SPI clock to 1/4th of the system clock (i.e. 4000 kHz for Arduino Uno)
                       ^~~~~~~~~~~~~~
                       SPI_CPOL_1
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BlueDot_BME280_Library/BlueDot_BME280.cpp:60:7: error: 'class arduino::MbedSPI' has no member named 'setDataMode'
   SPI.setDataMode(SPI_MODE0);        //Set Byte Transfer to (0,0) Mode
       ^~~~~~~~~~~

examples/BME280_MultipleSensorsSPI

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BlueDot_BME280_Library/BlueDot_BME280.cpp: In member function 'uint8_t BlueDot_BME280::init()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BlueDot_BME280_Library/BlueDot_BME280.cpp:58:7: error: 'class arduino::MbedSPI' has no member named 'setBitOrder'
   SPI.setBitOrder(MSBFIRST);        //Most significant Bit first
       ^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BlueDot_BME280_Library/BlueDot_BME280.cpp:59:7: error: 'class arduino::MbedSPI' has no member named 'setClockDivider'
   SPI.setClockDivider(SPI_CLOCK_DIV4);     //Sets SPI clock to 1/4th of the system clock (i.e. 4000 kHz for Arduino Uno)
       ^~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BlueDot_BME280_Library/BlueDot_BME280.cpp:59:23: error: 'SPI_CLOCK_DIV4' was not declared in this scope
   SPI.setClockDivider(SPI_CLOCK_DIV4);     //Sets SPI clock to 1/4th of the system clock (i.e. 4000 kHz for Arduino Uno)
                       ^~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BlueDot_BME280_Library/BlueDot_BME280.cpp:59:23: note: suggested alternative: 'SPI_CPOL_1'
   SPI.setClockDivider(SPI_CLOCK_DIV4);     //Sets SPI clock to 1/4th of the system clock (i.e. 4000 kHz for Arduino Uno)
                       ^~~~~~~~~~~~~~
                       SPI_CPOL_1
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BlueDot_BME280_Library/BlueDot_BME280.cpp:60:7: error: 'class arduino::MbedSPI' has no member named 'setDataMode'
   SPI.setDataMode(SPI_MODE0);        //Set Byte Transfer to (0,0) Mode
       ^~~~~~~~~~~

examples/BME280_WeatherStation

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BlueDot_BME280_Library/BlueDot_BME280.cpp: In member function 'uint8_t BlueDot_BME280::init()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BlueDot_BME280_Library/BlueDot_BME280.cpp:58:7: error: 'class arduino::MbedSPI' has no member named 'setBitOrder'
   SPI.setBitOrder(MSBFIRST);        //Most significant Bit first
       ^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BlueDot_BME280_Library/BlueDot_BME280.cpp:59:7: error: 'class arduino::MbedSPI' has no member named 'setClockDivider'
   SPI.setClockDivider(SPI_CLOCK_DIV4);     //Sets SPI clock to 1/4th of the system clock (i.e. 4000 kHz for Arduino Uno)
       ^~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BlueDot_BME280_Library/BlueDot_BME280.cpp:59:23: error: 'SPI_CLOCK_DIV4' was not declared in this scope
   SPI.setClockDivider(SPI_CLOCK_DIV4);     //Sets SPI clock to 1/4th of the system clock (i.e. 4000 kHz for Arduino Uno)
                       ^~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BlueDot_BME280_Library/BlueDot_BME280.cpp:59:23: note: suggested alternative: 'SPI_CPOL_1'
   SPI.setClockDivider(SPI_CLOCK_DIV4);     //Sets SPI clock to 1/4th of the system clock (i.e. 4000 kHz for Arduino Uno)
                       ^~~~~~~~~~~~~~
                       SPI_CPOL_1
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BlueDot_BME280_Library/BlueDot_BME280.cpp:60:7: error: 'class arduino::MbedSPI' has no member named 'setDataMode'
   SPI.setDataMode(SPI_MODE0);        //Set Byte Transfer to (0,0) Mode
       ^~~~~~~~~~~

arduino:megaavr:nona4809 @ 1.8.7

Inclusion

Result: FAIL
This library has no main header file so an empty one was created.

/tmp/arduino-testlib2757593578/test/test.ino:1:10: fatal error: BlueDot_BME280_Library.h: No such file or directory
 #include <BlueDot_BME280_Library.h>
          ^~~~~~~~~~~~~~~~~~~~~~~~~~
compilation terminated.

examples/BME280_MultipleSensorsI2C

Result: PASS

Sketch uses 16673 bytes (33%) of program storage space. Maximum is 49152 bytes.
Global variables use 680 bytes (11%) of dynamic memory, leaving 5464 bytes for local variables. Maximum is 6144 bytes.
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BlueDot_BME280_Library/BlueDot_BME280.h:9:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BlueDot_BME280_Library/BlueDot_BME280.cpp:10:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h: In member function 'uint8_t BlueDot_BME280::readByte(byte)':
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:63:12: note: candidate 1: size_t TwoWire::requestFrom(int, int)
     size_t requestFrom(int, int);
            ^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:61:12: note: candidate 2: virtual size_t TwoWire::requestFrom(uint8_t, size_t)
     size_t requestFrom(uint8_t, size_t);
            ^~~~~~~~~~~

examples/BME280_MultipleSensorsSPI

Result: PASS

Sketch uses 18533 bytes (37%) of program storage space. Maximum is 49152 bytes.
Global variables use 792 bytes (12%) of dynamic memory, leaving 5352 bytes for local variables. Maximum is 6144 bytes.
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BlueDot_BME280_Library/BlueDot_BME280.h:9:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BlueDot_BME280_Library/BlueDot_BME280.cpp:10:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h: In member function 'uint8_t BlueDot_BME280::readByte(byte)':
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:63:12: note: candidate 1: size_t TwoWire::requestFrom(int, int)
     size_t requestFrom(int, int);
            ^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:61:12: note: candidate 2: virtual size_t TwoWire::requestFrom(uint8_t, size_t)
     size_t requestFrom(uint8_t, size_t);
            ^~~~~~~~~~~

examples/BME280_WeatherStation

Result: PASS

Sketch uses 16417 bytes (33%) of program storage space. Maximum is 49152 bytes.
Global variables use 622 bytes (10%) of dynamic memory, leaving 5522 bytes for local variables. Maximum is 6144 bytes.
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BlueDot_BME280_Library/BlueDot_BME280.h:9:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BlueDot_BME280_Library/BlueDot_BME280.cpp:10:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h: In member function 'uint8_t BlueDot_BME280::readByte(byte)':
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:63:12: note: candidate 1: size_t TwoWire::requestFrom(int, int)
     size_t requestFrom(int, int);
            ^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:61:12: note: candidate 2: virtual size_t TwoWire::requestFrom(uint8_t, size_t)
     size_t requestFrom(uint8_t, size_t);
            ^~~~~~~~~~~

arduino:samd:mkrwifi1010 @ 1.8.12

Inclusion

Result: FAIL
This library has no main header file so an empty one was created.

/tmp/arduino-testlib1960933076/test/test.ino:1:10: fatal error: BlueDot_BME280_Library.h: No such file or directory
 #include <BlueDot_BME280_Library.h>
          ^~~~~~~~~~~~~~~~~~~~~~~~~~
compilation terminated.

examples/BME280_MultipleSensorsI2C

Result: PASS

Sketch uses 35724 bytes (13%) of program storage space. Maximum is 262144 bytes.
Global variables use 3784 bytes (11%) of dynamic memory, leaving 28984 bytes for local variables. Maximum is 32768 bytes.

examples/BME280_MultipleSensorsSPI

Result: PASS

Sketch uses 37132 bytes (14%) of program storage space. Maximum is 262144 bytes.
Global variables use 3912 bytes (11%) of dynamic memory, leaving 28856 bytes for local variables. Maximum is 32768 bytes.

examples/BME280_WeatherStation

Result: PASS

Sketch uses 35964 bytes (13%) of program storage space. Maximum is 262144 bytes.
Global variables use 3716 bytes (11%) of dynamic memory, leaving 29052 bytes for local variables. Maximum is 32768 bytes.

esp32:esp32:d1_mini32 @ 1.0.6

Inclusion

Result: FAIL
This library has no main header file so an empty one was created.

/tmp/arduino-testlib3118928270/test/test.ino:1:36: fatal error: BlueDot_BME280_Library.h: No such file or directory
compilation terminated.

examples/BME280_MultipleSensorsI2C

Result: PASS

Sketch uses 225314 bytes (17%) of program storage space. Maximum is 1310720 bytes.
Global variables use 14352 bytes (4%) of dynamic memory, leaving 313328 bytes for local variables. Maximum is 327680 bytes.
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BlueDot_BME280_Library/BlueDot_BME280.h:9:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BlueDot_BME280_Library/BlueDot_BME280.cpp:10:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/esp32/hardware/esp32/1.0.6/libraries/Wire/src/Wire.h: In member function 'uint8_t BlueDot_BME280::readByte(byte)':
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/esp32/hardware/esp32/1.0.6/libraries/Wire/src/Wire.h:103:13: note: candidate 1: uint8_t TwoWire::requestFrom(int, int)
     uint8_t requestFrom(int address, int size);
             ^
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/esp32/hardware/esp32/1.0.6/libraries/Wire/src/Wire.h:101:13: note: candidate 2: uint8_t TwoWire::requestFrom(uint8_t, uint8_t)
     uint8_t requestFrom(uint8_t address, uint8_t size);
             ^

examples/BME280_MultipleSensorsSPI

Result: PASS

Sketch uses 226790 bytes (17%) of program storage space. Maximum is 1310720 bytes.
Global variables use 14480 bytes (4%) of dynamic memory, leaving 313200 bytes for local variables. Maximum is 327680 bytes.
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BlueDot_BME280_Library/BlueDot_BME280.h:9:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BlueDot_BME280_Library/BlueDot_BME280.cpp:10:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/esp32/hardware/esp32/1.0.6/libraries/Wire/src/Wire.h: In member function 'uint8_t BlueDot_BME280::readByte(byte)':
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/esp32/hardware/esp32/1.0.6/libraries/Wire/src/Wire.h:103:13: note: candidate 1: uint8_t TwoWire::requestFrom(int, int)
     uint8_t requestFrom(int address, int size);
             ^
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/esp32/hardware/esp32/1.0.6/libraries/Wire/src/Wire.h:101:13: note: candidate 2: uint8_t TwoWire::requestFrom(uint8_t, uint8_t)
     uint8_t requestFrom(uint8_t address, uint8_t size);
             ^

examples/BME280_WeatherStation

Result: PASS

Sketch uses 225618 bytes (17%) of program storage space. Maximum is 1310720 bytes.
Global variables use 14288 bytes (4%) of dynamic memory, leaving 313392 bytes for local variables. Maximum is 327680 bytes.
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BlueDot_BME280_Library/BlueDot_BME280.h:9:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BlueDot_BME280_Library/BlueDot_BME280.cpp:10:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/esp32/hardware/esp32/1.0.6/libraries/Wire/src/Wire.h: In member function 'uint8_t BlueDot_BME280::readByte(byte)':
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/esp32/hardware/esp32/1.0.6/libraries/Wire/src/Wire.h:103:13: note: candidate 1: uint8_t TwoWire::requestFrom(int, int)
     uint8_t requestFrom(int address, int size);
             ^
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/esp32/hardware/esp32/1.0.6/libraries/Wire/src/Wire.h:101:13: note: candidate 2: uint8_t TwoWire::requestFrom(uint8_t, uint8_t)
     uint8_t requestFrom(uint8_t address, uint8_t size);
             ^