This report was generated on Wednesday, 23-Feb-22 22:48:15 CET using arduino-testlib.
Version: 1.0.1
More details
| Board | Claims compatibility | Inclusion | Teensy40_ESP8266Shield |
Teensy40_Serial_USB |
|---|---|---|---|---|
|
arduino:avr:uno
1.8.4 |
No ⚠️ | PASS | FAIL | FAIL |
|
arduino:mbed_nano:nanorp2040connect
2.7.2 |
No ⚠️ | PASS | FAIL | FAIL |
|
arduino:megaavr:nona4809
1.8.7 |
No ⚠️ | PASS | FAIL | PASS |
|
arduino:samd:mkrwifi1010
1.8.12 |
No ⚠️ | PASS | FAIL | PASS |
|
esp32:esp32:d1_mini32
1.0.6 |
No ⚠️ | PASS | FAIL | PASS |
Result: PASS
This library has no main header file so an empty one was created.
WARNING: library Blynk_Teensy claims to run on teensy architecture(s) and may be incompatible with your current board which runs on avr architecture(s). Sketch uses 444 bytes (1%) of program storage space. Maximum is 32256 bytes. Global variables use 9 bytes (0%) of dynamic memory, leaving 2039 bytes for local variables. Maximum is 2048 bytes.
Result: FAIL
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/Blynk_Teensy/examples/Teensy40_ESP8266Shield/Teensy40_ESP8266Shield.ino:17:10: fatal error: ESP8266_Lib.h: No such file or directory
#include <ESP8266_Lib.h>
^~~~~~~~~~~~~~~
compilation terminated.
Result: FAIL
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/Blynk_For_Chinese/src/Blynk/BlynkDebug.h: In function 'void BLYNK_LOG_TIME()':
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/Blynk_Teensy/examples/Teensy40_Serial_USB/Teensy40_Serial_USB.ino:13:25: error: 'Serial1' was not declared in this scope
#define HWSERIAL Serial1 // RX1: pin 0, TX1 : pin 1 on Tennsy 4.0
^
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/Blynk_Teensy/examples/Teensy40_Serial_USB/Teensy40_Serial_USB.ino:11:21: note: in expansion of macro 'HWSERIAL'
#define BLYNK_PRINT HWSERIAL
^~~~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/Blynk_For_Chinese/src/Blynk/BlynkDebug.h:134:13: note: in expansion of macro 'BLYNK_PRINT'
BLYNK_PRINT.print('[');
^~~~~~~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/Blynk_Teensy/examples/Teensy40_Serial_USB/Teensy40_Serial_USB.ino:13:25: note: suggested alternative: 'Serial'
#define HWSERIAL Serial1 // RX1: pin 0, TX1 : pin 1 on Tennsy 4.0
^
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/Blynk_Teensy/examples/Teensy40_Serial_USB/Teensy40_Serial_USB.ino:11:21: note: in expansion of macro 'HWSERIAL'
#define BLYNK_PRINT HWSERIAL
^~~~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/Blynk_For_Chinese/src/Blynk/BlynkDebug.h:134:13: note: in expansion of macro 'BLYNK_PRINT'
BLYNK_PRINT.print('[');
^~~~~~~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/Blynk_For_Chinese/src/Blynk/BlynkDebug.h: In function 'void blynk_dbg_print(const char*, ...)':
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/Blynk_Teensy/examples/Teensy40_Serial_USB/Teensy40_Serial_USB.ino:13:25: error: 'Serial1' was not declared in this scope
#define HWSERIAL Serial1 // RX1: pin 0, TX1 : pin 1 on Tennsy 4.0
^
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/Blynk_Teensy/examples/Teensy40_Serial_USB/Teensy40_Serial_USB.ino:11:21: note: in expansion of macro 'HWSERIAL'
#define BLYNK_PRINT HWSERIAL
^~~~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/Blynk_For_Chinese/src/Blynk/BlynkDebug.h:183:13: note: in expansion of macro 'BLYNK_PRINT'
BLYNK_PRINT.print('[');
^~~~~~~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/Blynk_Teensy/examples/Teensy40_Serial_USB/Teensy40_Serial_USB.ino:13:25: note: suggested alternative: 'Serial'
#define HWSERIAL Serial1 // RX1: pin 0, TX1 : pin 1 on Tennsy 4.0
^
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/Blynk_Teensy/examples/Teensy40_Serial_USB/Teensy40_Serial_USB.ino:11:21: note: in expansion of macro 'HWSERIAL'
#define BLYNK_PRINT HWSERIAL
^~~~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/Blynk_For_Chinese/src/Blynk/BlynkDebug.h:183:13: note: in expansion of macro 'BLYNK_PRINT'
BLYNK_PRINT.print('[');
^~~~~~~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/Blynk_For_Chinese/src/BlynkApiArduino.h: In member function 'void BlynkApi<Proto>::processCmd(const void*, size_t)':
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/Blynk_Teensy/examples/Teensy40_Serial_USB/Teensy40_Serial_USB.ino:13:25: error: 'Serial1' was not declared in this scope
#define HWSERIAL Serial1 // RX1: pin 0, TX1 : pin 1 on Tennsy 4.0
^
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/Blynk_Teensy/examples/Teensy40_Serial_USB/Teensy40_Serial_USB.ino:11:21: note: in expansion of macro 'HWSERIAL'
#define BLYNK_PRINT HWSERIAL
^~~~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/Blynk_For_Chinese/src/Blynk/BlynkDebug.h:117:63: note: in expansion of macro 'BLYNK_PRINT'
#define BLYNK_LOG2(p1,p2) { BLYNK_LOG_TIME(); BLYNK_PRINT.print(p1); BLYNK_PRINT.println(p2); }
^~~~~~~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/Blynk_For_Chinese/src/BlynkApiArduino.h:194:9: note: in expansion of macro 'BLYNK_LOG2'
BLYNK_LOG2(BLYNK_F("Invalid HW cmd: "), cmd);
^~~~~~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/Blynk_Teensy/examples/Teensy40_Serial_USB/Teensy40_Serial_USB.ino:13:25: note: suggested alternative: 'Serial'
#define HWSERIAL Serial1 // RX1: pin 0, TX1 : pin 1 on Tennsy 4.0
^
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/Blynk_Teensy/examples/Teensy40_Serial_USB/Teensy40_Serial_USB.ino:11:21: note: in expansion of macro 'HWSERIAL'
#define BLYNK_PRINT HWSERIAL
^~~~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/Blynk_For_Chinese/src/Blynk/BlynkDebug.h:117:63: note: in expansion of macro 'BLYNK_PRINT'
#define BLYNK_LOG2(p1,p2) { BLYNK_LOG_TIME(); BLYNK_PRINT.print(p1); BLYNK_PRINT.println(p2); }
^~~~~~~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/Blynk_For_Chinese/src/BlynkApiArduino.h:194:9: note: in expansion of macro 'BLYNK_LOG2'
BLYNK_LOG2(BLYNK_F("Invalid HW cmd: "), cmd);
^~~~~~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/Blynk_For_Chinese/src/Blynk/BlynkProtocol.h: In member function 'void BlynkProtocol<Transp>::disconnect()':
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/Blynk_Teensy/examples/Teensy40_Serial_USB/Teensy40_Serial_USB.ino:13:25: error: 'Serial1' was not declared in this scope
#define HWSERIAL Serial1 // RX1: pin 0, TX1 : pin 1 on Tennsy 4.0
^
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/Blynk_Teensy/examples/Teensy40_Serial_USB/Teensy40_Serial_USB.ino:11:21: note: in expansion of macro 'HWSERIAL'
#define BLYNK_PRINT HWSERIAL
^~~~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/Blynk_For_Chinese/src/Blynk/BlynkDebug.h:116:63: note: in expansion of macro 'BLYNK_PRINT'
#define BLYNK_LOG1(p1) { BLYNK_LOG_TIME(); BLYNK_PRINT.println(p1); }
^~~~~~~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/Blynk_For_Chinese/src/Blynk/BlynkProtocol.h:63:9: note: in expansion of macro 'BLYNK_LOG1'
BLYNK_LOG1(BLYNK_F("Disconnected"));
^~~~~~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/Blynk_Teensy/examples/Teensy40_Serial_USB/Teensy40_Serial_USB.ino:13:25: note: suggested alternative: 'Serial'
#define HWSERIAL Serial1 // RX1: pin 0, TX1 : pin 1 on Tennsy 4.0
^
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/Blynk_Teensy/examples/Teensy40_Serial_USB/Teensy40_Serial_USB.ino:11:21: note: in expansion of macro 'HWSERIAL'
#define BLYNK_PRINT HWSERIAL
^~~~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/Blynk_For_Chinese/src/Blynk/BlynkDebug.h:116:63: note: in expansion of macro 'BLYNK_PRINT'
#define BLYNK_LOG1(p1) { BLYNK_LOG_TIME(); BLYNK_PRINT.println(p1); }
^~~~~~~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/Blynk_For_Chinese/src/Blynk/BlynkProtocol.h:63:9: note: in expansion of macro 'BLYNK_LOG1'
BLYNK_LOG1(BLYNK_F("Disconnected"));
^~~~~~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/Blynk_For_Chinese/src/Blynk/BlynkProtocol.h: In member function 'void BlynkProtocol<Transp>::printBanner()':
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/Blynk_Teensy/examples/Teensy40_Serial_USB/Teensy40_Serial_USB.ino:13:25: error: 'Serial1' was not declared in this scope
#define HWSERIAL Serial1 // RX1: pin 0, TX1 : pin 1 on Tennsy 4.0
^
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/Blynk_Teensy/examples/Teensy40_Serial_USB/Teensy40_Serial_USB.ino:11:21: note: in expansion of macro 'HWSERIAL'
#define BLYNK_PRINT HWSERIAL
^~~~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/Blynk_For_Chinese/src/Blynk/BlynkDebug.h:116:63: note: in expansion of macro 'BLYNK_PRINT'
#define BLYNK_LOG1(p1) { BLYNK_LOG_TIME(); BLYNK_PRINT.println(p1); }
^~~~~~~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/Blynk_For_Chinese/src/Blynk/BlynkProtocol.h:82:9: note: in expansion of macro 'BLYNK_LOG1'
BLYNK_LOG1(BLYNK_F(BLYNK_NEWLINE
^~~~~~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/Blynk_Teensy/examples/Teensy40_Serial_USB/Teensy40_Serial_USB.ino:13:25: note: suggested alternative: 'Serial'
#define HWSERIAL Serial1 // RX1: pin 0, TX1 : pin 1 on
Result: PASS
WARNING: library Blynk_Teensy claims to run on teensy architecture(s) and may be incompatible with your current board which runs on mbed_nano architecture(s). Sketch uses 78756 bytes (0%) of program storage space. Maximum is 16777216 bytes. Global variables use 43444 bytes (16%) of dynamic memory, leaving 226892 bytes for local variables. Maximum is 270336 bytes.
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Blynk_Teensy/examples/Teensy40_ESP8266Shield/Teensy40_ESP8266Shield.ino:17:10: fatal error: ESP8266_Lib.h: No such file or directory
#include <ESP8266_Lib.h>
^~~~~~~~~~~~~~~
compilation terminated.
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Blynk_For_Chinese/src/utility/BlynkDebug.cpp:151:12: error: 'Timer' does not name a type; did you mean 'time'?
static Timer blynk_millis_timer;
^~~~~
time
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Blynk_For_Chinese/src/utility/BlynkDebug.cpp:152:12: error: 'Ticker' does not name a type; did you mean 'Socket'?
static Ticker blynk_waker;
^~~~~~
Socket
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Blynk_For_Chinese/src/utility/BlynkDebug.cpp: In function 'void BlynkSystemInit()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Blynk_For_Chinese/src/utility/BlynkDebug.cpp:162:9: error: 'blynk_waker' was not declared in this scope
blynk_waker.attach(&blynk_wake, 2.0);
^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Blynk_For_Chinese/src/utility/BlynkDebug.cpp:162:9: note: suggested alternative: 'blynk_wake'
blynk_waker.attach(&blynk_wake, 2.0);
^~~~~~~~~~~
blynk_wake
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Blynk_For_Chinese/src/utility/BlynkDebug.cpp:163:9: error: 'blynk_millis_timer' was not declared in this scope
blynk_millis_timer.start();
^~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Blynk_For_Chinese/src/utility/BlynkDebug.cpp:163:9: note: suggested alternative: 'millis_time_t'
blynk_millis_timer.start();
^~~~~~~~~~~~~~~~~~
millis_time_t
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Blynk_For_Chinese/src/utility/BlynkDebug.cpp: In function 'void BlynkDelay(millis_time_t)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Blynk_For_Chinese/src/utility/BlynkDebug.cpp:168:9: error: 'wait_ms' was not declared in this scope
wait_ms(ms);
^~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Blynk_For_Chinese/src/utility/BlynkDebug.cpp:168:9: note: suggested alternative: 'wait_ns'
wait_ms(ms);
^~~~~~~
wait_ns
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Blynk_For_Chinese/src/utility/BlynkDebug.cpp: In function 'millis_time_t BlynkMillis()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Blynk_For_Chinese/src/utility/BlynkDebug.cpp:173:16: error: 'blynk_millis_timer' was not declared in this scope
return blynk_millis_timer.read_ms();
^~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Blynk_For_Chinese/src/utility/BlynkDebug.cpp:173:16: note: suggested alternative: 'millis_time_t'
return blynk_millis_timer.read_ms();
^~~~~~~~~~~~~~~~~~
millis_time_t
Multiple libraries were found for "BlynkSimpleStream.h"
Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Blynk_For_Chinese
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Blynk
Result: PASS
WARNING: library Blynk_Teensy claims to run on teensy architecture(s) and may be incompatible with your current board which runs on megaavr architecture(s). Sketch uses 802 bytes (1%) of program storage space. Maximum is 49152 bytes. Global variables use 22 bytes (0%) of dynamic memory, leaving 6122 bytes for local variables. Maximum is 6144 bytes.
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Blynk_Teensy/examples/Teensy40_ESP8266Shield/Teensy40_ESP8266Shield.ino:17:10: fatal error: ESP8266_Lib.h: No such file or directory
#include <ESP8266_Lib.h>
^~~~~~~~~~~~~~~
compilation terminated.
Result: PASS
Sketch uses 8801 bytes (17%) of program storage space. Maximum is 49152 bytes. Global variables use 382 bytes (6%) of dynamic memory, leaving 5762 bytes for local variables. Maximum is 6144 bytes.
Result: PASS
This library has no main header file so an empty one was created.
WARNING: library Blynk_Teensy claims to run on teensy architecture(s) and may be incompatible with your current board which runs on samd architecture(s). Sketch uses 12156 bytes (4%) of program storage space. Maximum is 262144 bytes. Global variables use 2996 bytes (9%) of dynamic memory, leaving 29772 bytes for local variables. Maximum is 32768 bytes.
Result: FAIL
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/Blynk_Teensy/examples/Teensy40_ESP8266Shield/Teensy40_ESP8266Shield.ino:17:10: fatal error: ESP8266_Lib.h: No such file or directory
#include <ESP8266_Lib.h>
^~~~~~~~~~~~~~~
compilation terminated.
Result: PASS
Sketch uses 20152 bytes (7%) of program storage space. Maximum is 262144 bytes. Global variables use 3444 bytes (10%) of dynamic memory, leaving 29324 bytes for local variables. Maximum is 32768 bytes.
Result: PASS
WARNING: library Blynk_Teensy claims to run on teensy architecture(s) and may be incompatible with your current board which runs on esp32 architecture(s). Sketch uses 197736 bytes (15%) of program storage space. Maximum is 1310720 bytes. Global variables use 13084 bytes (3%) of dynamic memory, leaving 314596 bytes for local variables. Maximum is 327680 bytes.
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Blynk_Teensy/examples/Teensy40_ESP8266Shield/Teensy40_ESP8266Shield.ino:17:25: fatal error: ESP8266_Lib.h: No such file or directory compilation terminated.
Result: PASS
Sketch uses 225934 bytes (17%) of program storage space. Maximum is 1310720 bytes. Global variables use 13536 bytes (4%) of dynamic memory, leaving 314144 bytes for local variables. Maximum is 327680 bytes.