Bme280 - compatibility matrix

This report was generated on Wednesday, 23-Feb-22 22:48:15 CET using arduino-testlib.

Bme280

Version: 1.0.4
More details

Compatibility matrix

Board Claims compatibility Inclusion 
FourWire
 
Settings
 
TwoWire
arduino:avr:uno
1.8.4 		Yes PASS FAIL FAIL FAIL
arduino:mbed_nano:nanorp2040connect
2.7.2 		Yes PASS FAIL FAIL FAIL
arduino:megaavr:nona4809
1.8.7 		Yes PASS FAIL FAIL FAIL
arduino:samd:mkrwifi1010
1.8.12 		Yes PASS FAIL FAIL FAIL
esp32:esp32:d1_mini32
1.0.6 		Yes PASS PASS PASS PASS

Compilation logs

arduino:avr:uno @ 1.8.4

Inclusion

Result: PASS 

Sketch uses 1636 bytes (5%) of program storage space. Maximum is 32256 bytes.
Global variables use 122 bytes (5%) of dynamic memory, leaving 1926 bytes for local variables. Maximum is 2048 bytes.

examples/FourWire

Result: FAIL 

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Bme280/examples/FourWire/FourWire.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Bme280/examples/FourWire/FourWire.ino:10:16: error: 'D1' was not declared in this scope
   sensor.begin(D1, &SPI);
                ^~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Bme280/examples/FourWire/FourWire.ino:10:16: note: suggested alternative: 'A1'
   sensor.begin(D1, &SPI);
                ^~
                A1

examples/Settings

Result: FAIL 

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Bme280/examples/Settings/Settings.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Bme280/examples/Settings/Settings.ino:8:14: error: 'D2' was not declared in this scope
   Wire.begin(D2, D1);
              ^~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Bme280/examples/Settings/Settings.ino:8:14: note: suggested alternative: 'A2'
   Wire.begin(D2, D1);
              ^~
              A2
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Bme280/examples/Settings/Settings.ino:8:18: error: 'D1' was not declared in this scope
   Wire.begin(D2, D1);
                  ^~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Bme280/examples/Settings/Settings.ino:8:18: note: suggested alternative: 'A1'
   Wire.begin(D2, D1);
                  ^~
                  A1

examples/TwoWire

Result: FAIL 

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Bme280/examples/TwoWire/TwoWire.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Bme280/examples/TwoWire/TwoWire.ino:8:14: error: 'D2' was not declared in this scope
   Wire.begin(D2, D1);
              ^~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Bme280/examples/TwoWire/TwoWire.ino:8:14: note: suggested alternative: 'A2'
   Wire.begin(D2, D1);
              ^~
              A2
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Bme280/examples/TwoWire/TwoWire.ino:8:18: error: 'D1' was not declared in this scope
   Wire.begin(D2, D1);
                  ^~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Bme280/examples/TwoWire/TwoWire.ino:8:18: note: suggested alternative: 'A1'
   Wire.begin(D2, D1);
                  ^~
                  A1

arduino:mbed_nano:nanorp2040connect @ 2.7.2

Inclusion

Result: PASS 

Sketch uses 83636 bytes (0%) of program storage space. Maximum is 16777216 bytes.
Global variables use 44404 bytes (16%) of dynamic memory, leaving 225932 bytes for local variables. Maximum is 270336 bytes.

examples/FourWire

Result: FAIL 

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Bme280/examples/FourWire/FourWire.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Bme280/examples/FourWire/FourWire.ino:10:16: error: 'D1' was not declared in this scope
   sensor.begin(D1, &SPI);
                ^~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Bme280/examples/FourWire/FourWire.ino:10:16: note: suggested alternative: 'A1'
   sensor.begin(D1, &SPI);
                ^~
                A1

examples/Settings

Result: FAIL 

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Bme280/examples/Settings/Settings.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Bme280/examples/Settings/Settings.ino:8:14: error: 'D2' was not declared in this scope
   Wire.begin(D2, D1);
              ^~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Bme280/examples/Settings/Settings.ino:8:14: note: suggested alternative: 'A2'
   Wire.begin(D2, D1);
              ^~
              A2
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Bme280/examples/Settings/Settings.ino:8:18: error: 'D1' was not declared in this scope
   Wire.begin(D2, D1);
                  ^~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Bme280/examples/Settings/Settings.ino:8:18: note: suggested alternative: 'A1'
   Wire.begin(D2, D1);
                  ^~
                  A1

examples/TwoWire

Result: FAIL 

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Bme280/examples/TwoWire/TwoWire.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Bme280/examples/TwoWire/TwoWire.ino:8:14: error: 'D2' was not declared in this scope
   Wire.begin(D2, D1);
              ^~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Bme280/examples/TwoWire/TwoWire.ino:8:14: note: suggested alternative: 'A2'
   Wire.begin(D2, D1);
              ^~
              A2
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Bme280/examples/TwoWire/TwoWire.ino:8:18: error: 'D1' was not declared in this scope
   Wire.begin(D2, D1);
                  ^~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Bme280/examples/TwoWire/TwoWire.ino:8:18: note: suggested alternative: 'A1'
   Wire.begin(D2, D1);
                  ^~
                  A1

arduino:megaavr:nona4809 @ 1.8.7

Inclusion

Result: PASS 

Sketch uses 5482 bytes (11%) of program storage space. Maximum is 49152 bytes.
Global variables use 335 bytes (5%) of dynamic memory, leaving 5809 bytes for local variables. Maximum is 6144 bytes.

examples/FourWire

Result: FAIL 

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Bme280/examples/FourWire/FourWire.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Bme280/examples/FourWire/FourWire.ino:10:16: error: 'D1' was not declared in this scope
   sensor.begin(D1, &SPI);
                ^~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Bme280/examples/FourWire/FourWire.ino:10:16: note: suggested alternative: 'A1'
   sensor.begin(D1, &SPI);
                ^~
                A1

examples/Settings

Result: FAIL 

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Bme280/examples/Settings/Settings.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Bme280/examples/Settings/Settings.ino:8:14: error: 'D2' was not declared in this scope
   Wire.begin(D2, D1);
              ^~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Bme280/examples/Settings/Settings.ino:8:14: note: suggested alternative: 'A2'
   Wire.begin(D2, D1);
              ^~
              A2
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Bme280/examples/Settings/Settings.ino:8:18: error: 'D1' was not declared in this scope
   Wire.begin(D2, D1);
                  ^~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Bme280/examples/Settings/Settings.ino:8:18: note: suggested alternative: 'A1'
   Wire.begin(D2, D1);
                  ^~
                  A1

examples/TwoWire

Result: FAIL 

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Bme280/examples/TwoWire/TwoWire.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Bme280/examples/TwoWire/TwoWire.ino:8:14: error: 'D2' was not declared in this scope
   Wire.begin(D2, D1);
              ^~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Bme280/examples/TwoWire/TwoWire.ino:8:14: note: suggested alternative: 'A2'
   Wire.begin(D2, D1);
              ^~
              A2
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Bme280/examples/TwoWire/TwoWire.ino:8:18: error: 'D1' was not declared in this scope
   Wire.begin(D2, D1);
                  ^~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Bme280/examples/TwoWire/TwoWire.ino:8:18: note: suggested alternative: 'A1'
   Wire.begin(D2, D1);
                  ^~
                  A1

arduino:samd:mkrwifi1010 @ 1.8.12

Inclusion

Result: PASS 

Sketch uses 14804 bytes (5%) of program storage space. Maximum is 262144 bytes.
Global variables use 3664 bytes (11%) of dynamic memory, leaving 29104 bytes for local variables. Maximum is 32768 bytes.

examples/FourWire

Result: FAIL 

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Bme280/examples/FourWire/FourWire.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Bme280/examples/FourWire/FourWire.ino:10:16: error: 'D1' was not declared in this scope
   sensor.begin(D1, &SPI);
                ^~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Bme280/examples/FourWire/FourWire.ino:10:16: note: suggested alternative: 'A1'
   sensor.begin(D1, &SPI);
                ^~
                A1

examples/Settings

Result: FAIL 

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Bme280/examples/Settings/Settings.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Bme280/examples/Settings/Settings.ino:8:14: error: 'D2' was not declared in this scope
   Wire.begin(D2, D1);
              ^~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Bme280/examples/Settings/Settings.ino:8:14: note: suggested alternative: 'A2'
   Wire.begin(D2, D1);
              ^~
              A2
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Bme280/examples/Settings/Settings.ino:8:18: error: 'D1' was not declared in this scope
   Wire.begin(D2, D1);
                  ^~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Bme280/examples/Settings/Settings.ino:8:18: note: suggested alternative: 'A1'
   Wire.begin(D2, D1);
                  ^~
                  A1

examples/TwoWire

Result: FAIL 

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Bme280/examples/TwoWire/TwoWire.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Bme280/examples/TwoWire/TwoWire.ino:8:14: error: 'D2' was not declared in this scope
   Wire.begin(D2, D1);
              ^~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Bme280/examples/TwoWire/TwoWire.ino:8:14: note: suggested alternative: 'A2'
   Wire.begin(D2, D1);
              ^~
              A2
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Bme280/examples/TwoWire/TwoWire.ino:8:18: error: 'D1' was not declared in this scope
   Wire.begin(D2, D1);
                  ^~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Bme280/examples/TwoWire/TwoWire.ino:8:18: note: suggested alternative: 'A1'
   Wire.begin(D2, D1);
                  ^~
                  A1

esp32:esp32:d1_mini32 @ 1.0.6

Inclusion

Result: PASS 

Sketch uses 203718 bytes (15%) of program storage space. Maximum is 1310720 bytes.
Global variables use 13920 bytes (4%) of dynamic memory, leaving 313760 bytes for local variables. Maximum is 327680 bytes.

examples/FourWire

Result: PASS 

Sketch uses 214670 bytes (16%) of program storage space. Maximum is 1310720 bytes.
Global variables use 14176 bytes (4%) of dynamic memory, leaving 313504 bytes for local variables. Maximum is 327680 bytes.

examples/Settings

Result: PASS 

Sketch uses 217118 bytes (16%) of program storage space. Maximum is 1310720 bytes.
Global variables use 14224 bytes (4%) of dynamic memory, leaving 313456 bytes for local variables. Maximum is 327680 bytes.

examples/TwoWire

Result: PASS 

Sketch uses 218470 bytes (16%) of program storage space. Maximum is 1310720 bytes.
Global variables use 14224 bytes (4%) of dynamic memory, leaving 313456 bytes for local variables. Maximum is 327680 bytes.