This report was generated on Wednesday, 23-Feb-22 22:48:15 CET using arduino-testlib.
Version: 1.0.1
More details
| Board | Claims compatibility | Inclusion | Basic_I2C |
Basic_SPI |
Int_I2C |
Sync_SPI |
|---|---|---|---|---|---|---|
|
arduino:avr:uno
1.8.4 |
Yes | PASS | PASS | PASS | PASS | FAIL |
|
arduino:mbed_nano:nanorp2040connect
2.7.2 |
Yes | PASS | PASS | PASS | PASS | PASS |
|
arduino:megaavr:nona4809
1.8.7 |
Yes | PASS | PASS | PASS | PASS | PASS |
|
arduino:samd:mkrwifi1010
1.8.12 |
Yes | PASS | PASS | PASS | PASS | PASS |
|
esp32:esp32:d1_mini32
1.0.6 |
Yes ⚠️ | FAIL | FAIL | FAIL | FAIL | FAIL |
Result: PASS
This library has no main header file so an empty one was created.
Sketch uses 1636 bytes (5%) of program storage space. Maximum is 32256 bytes. Global variables use 122 bytes (5%) of dynamic memory, leaving 1926 bytes for local variables. Maximum is 2048 bytes.
Result: PASS
Sketch uses 10260 bytes (31%) of program storage space. Maximum is 32256 bytes. Global variables use 641 bytes (31%) of dynamic memory, leaving 1407 bytes for local variables. Maximum is 2048 bytes.
Result: PASS
Sketch uses 10228 bytes (31%) of program storage space. Maximum is 32256 bytes. Global variables use 612 bytes (29%) of dynamic memory, leaving 1436 bytes for local variables. Maximum is 2048 bytes.
Result: PASS
Sketch uses 10782 bytes (33%) of program storage space. Maximum is 32256 bytes. Global variables use 647 bytes (31%) of dynamic memory, leaving 1401 bytes for local variables. Maximum is 2048 bytes.
Result: FAIL
Sketch uses 18662 bytes (57%) of program storage space. Maximum is 32256 bytes. Global variables use 6601 bytes (322%) of dynamic memory, leaving -4553 bytes for local variables. Maximum is 2048 bytes. Not enough memory; see https://support.arduino.cc/hc/en-us/articles/360013825179 for tips on reducing your footprint.
Result: PASS
Sketch uses 83608 bytes (0%) of program storage space. Maximum is 16777216 bytes. Global variables use 44392 bytes (16%) of dynamic memory, leaving 225944 bytes for local variables. Maximum is 270336 bytes.
Result: PASS
Sketch uses 91144 bytes (0%) of program storage space. Maximum is 16777216 bytes. Global variables use 44568 bytes (16%) of dynamic memory, leaving 225768 bytes for local variables. Maximum is 270336 bytes.
Result: PASS
Sketch uses 91144 bytes (0%) of program storage space. Maximum is 16777216 bytes. Global variables use 44568 bytes (16%) of dynamic memory, leaving 225768 bytes for local variables. Maximum is 270336 bytes.
Result: PASS
Sketch uses 92722 bytes (0%) of program storage space. Maximum is 16777216 bytes. Global variables use 44820 bytes (16%) of dynamic memory, leaving 225516 bytes for local variables. Maximum is 270336 bytes.
Result: PASS
Sketch uses 93726 bytes (0%) of program storage space. Maximum is 16777216 bytes. Global variables use 44660 bytes (16%) of dynamic memory, leaving 225676 bytes for local variables. Maximum is 270336 bytes.
Result: PASS
Sketch uses 5482 bytes (11%) of program storage space. Maximum is 49152 bytes.
Global variables use 335 bytes (5%) of dynamic memory, leaving 5809 bytes for local variables. Maximum is 6144 bytes.
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Bolder_Flight_Systems_BMI088/src/BMI088.h:28:0,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Bolder_Flight_Systems_BMI088/src/BMI088.cpp:24:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h: In member function 'void Bmi088Accel::readRegisters(uint8_t, uint8_t, uint8_t*)':
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:63:12: note: candidate 1: size_t TwoWire::requestFrom(int, int)
size_t requestFrom(int, int);
^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:61:12: note: candidate 2: virtual size_t TwoWire::requestFrom(uint8_t, size_t)
size_t requestFrom(uint8_t, size_t);
^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h: In member function 'void Bmi088Gyro::readRegisters(uint8_t, uint8_t, uint8_t*)':
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:63:12: note: candidate 1: size_t TwoWire::requestFrom(int, int)
size_t requestFrom(int, int);
^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:61:12: note: candidate 2: virtual size_t TwoWire::requestFrom(uint8_t, size_t)
size_t requestFrom(uint8_t, size_t);
^~~~~~~~~~~
Result: PASS
Sketch uses 13827 bytes (28%) of program storage space. Maximum is 49152 bytes.
Global variables use 648 bytes (10%) of dynamic memory, leaving 5496 bytes for local variables. Maximum is 6144 bytes.
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Bolder_Flight_Systems_BMI088/src/BMI088.h:28:0,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Bolder_Flight_Systems_BMI088/src/BMI088.cpp:24:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h: In member function 'void Bmi088Accel::readRegisters(uint8_t, uint8_t, uint8_t*)':
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:63:12: note: candidate 1: size_t TwoWire::requestFrom(int, int)
size_t requestFrom(int, int);
^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:61:12: note: candidate 2: virtual size_t TwoWire::requestFrom(uint8_t, size_t)
size_t requestFrom(uint8_t, size_t);
^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h: In member function 'void Bmi088Gyro::readRegisters(uint8_t, uint8_t, uint8_t*)':
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:63:12: note: candidate 1: size_t TwoWire::requestFrom(int, int)
size_t requestFrom(int, int);
^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:61:12: note: candidate 2: virtual size_t TwoWire::requestFrom(uint8_t, size_t)
size_t requestFrom(uint8_t, size_t);
^~~~~~~~~~~
Result: PASS
Sketch uses 13865 bytes (28%) of program storage space. Maximum is 49152 bytes.
Global variables use 702 bytes (11%) of dynamic memory, leaving 5442 bytes for local variables. Maximum is 6144 bytes.
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Bolder_Flight_Systems_BMI088/src/BMI088.h:28:0,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Bolder_Flight_Systems_BMI088/src/BMI088.cpp:24:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h: In member function 'void Bmi088Accel::readRegisters(uint8_t, uint8_t, uint8_t*)':
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:63:12: note: candidate 1: size_t TwoWire::requestFrom(int, int)
size_t requestFrom(int, int);
^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:61:12: note: candidate 2: virtual size_t TwoWire::requestFrom(uint8_t, size_t)
size_t requestFrom(uint8_t, size_t);
^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h: In member function 'void Bmi088Gyro::readRegisters(uint8_t, uint8_t, uint8_t*)':
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:63:12: note: candidate 1: size_t TwoWire::requestFrom(int, int)
size_t requestFrom(int, int);
^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:61:12: note: candidate 2: virtual size_t TwoWire::requestFrom(uint8_t, size_t)
size_t requestFrom(uint8_t, size_t);
^~~~~~~~~~~
Result: PASS
Sketch uses 14831 bytes (30%) of program storage space. Maximum is 49152 bytes.
Global variables use 842 bytes (13%) of dynamic memory, leaving 5302 bytes for local variables. Maximum is 6144 bytes.
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Bolder_Flight_Systems_BMI088/src/BMI088.h:28:0,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Bolder_Flight_Systems_BMI088/src/BMI088.cpp:24:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h: In member function 'void Bmi088Accel::readRegisters(uint8_t, uint8_t, uint8_t*)':
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:63:12: note: candidate 1: size_t TwoWire::requestFrom(int, int)
size_t requestFrom(int, int);
^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:61:12: note: candidate 2: virtual size_t TwoWire::requestFrom(uint8_t, size_t)
size_t requestFrom(uint8_t, size_t);
^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h: In member function 'void Bmi088Gyro::readRegisters(uint8_t, uint8_t, uint8_t*)':
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:63:12: note: candidate 1: size_t TwoWire::requestFrom(int, int)
size_t requestFrom(int, int);
^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:61:12: note: candidate 2: virtual size_t TwoWire::requestFrom(uint8_t, size_t)
size_t requestFrom(uint8_t, size_t);
^~~~~~~~~~~
Result: PASS
Sketch uses 22241 bytes (45%) of program storage space. Maximum is 49152 bytes.
Global variables use 753 bytes (12%) of dynamic memory, leaving 5391 bytes for local variables. Maximum is 6144 bytes.
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Bolder_Flight_Systems_BMI088/src/BMI088.h:28:0,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Bolder_Flight_Systems_BMI088/src/BMI088.cpp:24:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h: In member function 'void Bmi088Accel::readRegisters(uint8_t, uint8_t, uint8_t*)':
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:63:12: note: candidate 1: size_t TwoWire::requestFrom(int, int)
size_t requestFrom(int, int);
^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:61:12: note: candidate 2: virtual size_t TwoWire::requestFrom(uint8_t, size_t)
size_t requestFrom(uint8_t, size_t);
^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h: In member function 'void Bmi088Gyro::readRegisters(uint8_t, uint8_t, uint8_t*)':
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:63:12: note: candidate 1: size_t TwoWire::requestFrom(int, int)
size_t requestFrom(int, int);
^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:61:12: note: candidate 2: virtual size_t TwoWire::requestFrom(uint8_t, size_t)
size_t requestFrom(uint8_t, size_t);
^~~~~~~~~~~
Result: PASS
This library has no main header file so an empty one was created.
Sketch uses 14780 bytes (5%) of program storage space. Maximum is 262144 bytes. Global variables use 3656 bytes (11%) of dynamic memory, leaving 29112 bytes for local variables. Maximum is 32768 bytes.
Result: PASS
Sketch uses 29732 bytes (11%) of program storage space. Maximum is 262144 bytes. Global variables use 3832 bytes (11%) of dynamic memory, leaving 28936 bytes for local variables. Maximum is 32768 bytes.
Result: PASS
Sketch uses 29732 bytes (11%) of program storage space. Maximum is 262144 bytes. Global variables use 3832 bytes (11%) of dynamic memory, leaving 28936 bytes for local variables. Maximum is 32768 bytes.
Result: PASS
Sketch uses 30612 bytes (11%) of program storage space. Maximum is 262144 bytes. Global variables use 3984 bytes (12%) of dynamic memory, leaving 28784 bytes for local variables. Maximum is 32768 bytes.
Result: PASS
Sketch uses 37732 bytes (14%) of program storage space. Maximum is 262144 bytes. Global variables use 3812 bytes (11%) of dynamic memory, leaving 28956 bytes for local variables. Maximum is 32768 bytes.
Result: FAIL
In file included from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/esp32/hardware/esp32/1.0.6/cores/esp32/esp32-hal.h:53:0,
from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/esp32/hardware/esp32/1.0.6/cores/esp32/Arduino.h:35,
from /tmp/arduino-sketch-37CD79AF90580BFEA1A8DE50DC0610C6/sketch/test.ino.cpp:1:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/esp32/hardware/esp32/1.0.6/cores/esp32/esp32-hal-gpio.h:39:27: error: expected identifier before numeric constant
#define OPEN_DRAIN 0x10
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Bolder_Flight_Systems_BMI088/src/BMI088.h:67:7: note: in expansion of macro 'OPEN_DRAIN'
OPEN_DRAIN
^
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/esp32/hardware/esp32/1.0.6/cores/esp32/esp32-hal-gpio.h:39:27: error: expected '}' before numeric constant
#define OPEN_DRAIN 0x10
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Bolder_Flight_Systems_BMI088/src/BMI088.h:67:7: note: in expansion of macro 'OPEN_DRAIN'
OPEN_DRAIN
^
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/esp32/hardware/esp32/1.0.6/cores/esp32/esp32-hal-gpio.h:39:27: error: expected unqualified-id before numeric constant
#define OPEN_DRAIN 0x10
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Bolder_Flight_Systems_BMI088/src/BMI088.h:67:7: note: in expansion of macro 'OPEN_DRAIN'
OPEN_DRAIN
^
In file included from /tmp/arduino-testlib1712724320/test/test.ino:1:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Bolder_Flight_Systems_BMI088/src/BMI088.h:73:25: error: expected ')' before '&' token
Bmi088Accel(TwoWire &bus,uint8_t address);
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Bolder_Flight_Systems_BMI088/src/BMI088.h:74:26: error: expected ')' before '&' token
Bmi088Accel(SPIClass &bus,uint8_t csPin);
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Bolder_Flight_Systems_BMI088/src/BMI088.h:76:17: error: 'Odr' was not declared in this scope
bool setOdr(Odr odr);
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Bolder_Flight_Systems_BMI088/src/BMI088.h:77:19: error: 'Range' was not declared in this scope
bool setRange(Range range);
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Bolder_Flight_Systems_BMI088/src/BMI088.h:78:22: error: 'PinMode' was not declared in this scope
bool pinModeInt1(PinMode mode, PinLevel level);
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Bolder_Flight_Systems_BMI088/src/BMI088.h:78:45: error: expected primary-expression before 'level'
bool pinModeInt1(PinMode mode, PinLevel level);
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Bolder_Flight_Systems_BMI088/src/BMI088.h:78:50: error: expression list treated as compound expression in initializer [-fpermissive]
bool pinModeInt1(PinMode mode, PinLevel level);
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Bolder_Flight_Systems_BMI088/src/BMI088.h:79:22: error: 'PinMode' was not declared in this scope
bool pinModeInt2(PinMode mode, PinLevel level);
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Bolder_Flight_Systems_BMI088/src/BMI088.h:79:45: error: expected primary-expression before 'level'
bool pinModeInt2(PinMode mode, PinLevel level);
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Bolder_Flight_Systems_BMI088/src/BMI088.h:79:50: error: expression list treated as compound expression in initializer [-fpermissive]
bool pinModeInt2(PinMode mode, PinLevel level);
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Bolder_Flight_Systems_BMI088/src/BMI088.h:90:3: error: expected unqualified-id before 'private'
private:
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Bolder_Flight_Systems_BMI088/src/BMI088.h:187:32: error: 'PinMode' has not been declared
bool pinModeInt1(PinIO io, PinMode mode, PinLevel level);
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Bolder_Flight_Systems_BMI088/src/BMI088.h:187:60: error: 'bool pinModeInt1(PinIO, int, PinLevel)' redeclared as different kind of symbol
bool pinModeInt1(PinIO io, PinMode mode, PinLevel level);
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Bolder_Flight_Systems_BMI088/src/BMI088.h:78:10: note: previous declaration 'bool pinModeInt1'
bool pinModeInt1(PinMode mode, PinLevel level);
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Bolder_Flight_Systems_BMI088/src/BMI088.h:188:32: error: 'PinMode' has not been declared
bool pinModeInt2(PinIO io, PinMode mode, PinLevel level);
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Bolder_Flight_Systems_BMI088/src/BMI088.h:188:60: error: 'bool pinModeInt2(PinIO, int, PinLevel)' redeclared as different kind of symbol
bool pinModeInt2(PinIO io, PinMode mode, PinLevel level);
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Bolder_Flight_Systems_BMI088/src/BMI088.h:79:10: note: previous declaration 'bool pinModeInt2'
bool pinModeInt2(PinMode mode, PinLevel level);
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Bolder_Flight_Systems_BMI088/src/BMI088.h:205:1: error: expected declaration before '}' token
};
^
Result: FAIL
In file included from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/esp32/hardware/esp32/1.0.6/cores/esp32/esp32-hal.h:53:0,
from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/esp32/hardware/esp32/1.0.6/cores/esp32/Arduino.h:35,
from /tmp/arduino-sketch-768482143EBECE3CD542C52715FCD7ED/sketch/Basic_I2C.ino.cpp:1:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/esp32/hardware/esp32/1.0.6/cores/esp32/esp32-hal-gpio.h:39:27: error: expected identifier before numeric constant
#define OPEN_DRAIN 0x10
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Bolder_Flight_Systems_BMI088/src/BMI088.h:67:7: note: in expansion of macro 'OPEN_DRAIN'
OPEN_DRAIN
^
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/esp32/hardware/esp32/1.0.6/cores/esp32/esp32-hal-gpio.h:39:27: error: expected '}' before numeric constant
#define OPEN_DRAIN 0x10
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Bolder_Flight_Systems_BMI088/src/BMI088.h:67:7: note: in expansion of macro 'OPEN_DRAIN'
OPEN_DRAIN
^
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/esp32/hardware/esp32/1.0.6/cores/esp32/esp32-hal-gpio.h:39:27: error: expected unqualified-id before numeric constant
#define OPEN_DRAIN 0x10
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Bolder_Flight_Systems_BMI088/src/BMI088.h:67:7: note: in expansion of macro 'OPEN_DRAIN'
OPEN_DRAIN
^
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Bolder_Flight_Systems_BMI088/examples/Basic_I2C/Basic_I2C.ino:23:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Bolder_Flight_Systems_BMI088/src/BMI088.h:73:25: error: expected ')' before '&' token
Bmi088Accel(TwoWire &bus,uint8_t address);
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Bolder_Flight_Systems_BMI088/src/BMI088.h:74:26: error: expected ')' before '&' token
Bmi088Accel(SPIClass &bus,uint8_t csPin);
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Bolder_Flight_Systems_BMI088/src/BMI088.h:76:17: error: 'Odr' was not declared in this scope
bool setOdr(Odr odr);
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Bolder_Flight_Systems_BMI088/src/BMI088.h:77:19: error: 'Range' was not declared in this scope
bool setRange(Range range);
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Bolder_Flight_Systems_BMI088/src/BMI088.h:78:22: error: 'PinMode' was not declared in this scope
bool pinModeInt1(PinMode mode, PinLevel level);
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Bolder_Flight_Systems_BMI088/src/BMI088.h:78:45: error: expected primary-expression before 'level'
bool pinModeInt1(PinMode mode, PinLevel level);
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Bolder_Flight_Systems_BMI088/src/BMI088.h:78:50: error: expression list treated as compound expression in initializer [-fpermissive]
bool pinModeInt1(PinMode mode, PinLevel level);
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Bolder_Flight_Systems_BMI088/src/BMI088.h:79:22: error: 'PinMode' was not declared in this scope
bool pinModeInt2(PinMode mode, PinLevel level);
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Bolder_Flight_Systems_BMI088/src/BMI088.h:79:45: error: expected primary-expression before 'level'
bool pinModeInt2(PinMode mode, PinLevel level);
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Bolder_Flight_Systems_BMI088/src/BMI088.h:79:50: error: expression list treated as compound expression in initializer [-fpermissive]
bool pinModeInt2(PinMode mode, PinLevel level);
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Bolder_Flight_Systems_BMI088/src/BMI088.h:90:3: error: expected unqualified-id before 'private'
private:
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Bolder_Flight_Systems_BMI088/src/BMI088.h:187:32: error: 'PinMode' has not been declared
bool pinModeInt1(PinIO io, PinMode mode, PinLevel level);
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Bolder_Flight_Systems_BMI088/src/BMI088.h:187:60: error: 'bool pinModeInt1(PinIO, int, PinLevel)' redeclared as different kind of symbol
bool pinModeInt1(PinIO io, PinMode mode, PinLevel level);
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Bolder_Flight_Systems_BMI088/src/BMI088.h:78:10: note: previous declaration 'bool pinModeInt1'
bool pinModeInt1(PinMode mode, PinLevel level);
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Bolder_Flight_Systems_BMI088/src/BMI088.h:188:32: error: 'PinMode' has not been declared
bool pinModeInt2(PinIO io, PinMode mode, PinLevel level);
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Bolder_Flight_Systems_BMI088/src/BMI088.h:188:60: error: 'bool pinModeInt2(PinIO, int, PinLevel)' redeclared as different kind of symbol
bool pinModeInt2(PinIO io, PinMode mode, PinLevel level);
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Bolder_Flight_Systems_BMI088/src/BMI088.h:79:10: note: previous declaration 'bool pinModeInt2'
bool pinModeInt2(PinMode mode, PinLevel level);
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Bolder_Flight_Systems_BMI088/src/BMI088.h:205:1: error: expected declaration before '}' token
};
^
Result: FAIL
In file included from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/esp32/hardware/esp32/1.0.6/cores/esp32/esp32-hal.h:53:0,
from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/esp32/hardware/esp32/1.0.6/cores/esp32/Arduino.h:35,
from /tmp/arduino-sketch-227645C085B34A88C2149C637337FFD3/sketch/Basic_SPI.ino.cpp:1:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/esp32/hardware/esp32/1.0.6/cores/esp32/esp32-hal-gpio.h:39:27: error: expected identifier before numeric constant
#define OPEN_DRAIN 0x10
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Bolder_Flight_Systems_BMI088/src/BMI088.h:67:7: note: in expansion of macro 'OPEN_DRAIN'
OPEN_DRAIN
^
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/esp32/hardware/esp32/1.0.6/cores/esp32/esp32-hal-gpio.h:39:27: error: expected '}' before numeric constant
#define OPEN_DRAIN 0x10
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Bolder_Flight_Systems_BMI088/src/BMI088.h:67:7: note: in expansion of macro 'OPEN_DRAIN'
OPEN_DRAIN
^
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/esp32/hardware/esp32/1.0.6/cores/esp32/esp32-hal-gpio.h:39:27: error: expected unqualified-id before numeric constant
#define OPEN_DRAIN 0x10
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Bolder_Flight_Systems_BMI088/src/BMI088.h:67:7: note: in expansion of macro 'OPEN_DRAIN'
OPEN_DRAIN
^
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Bolder_Flight_Systems_BMI088/examples/Basic_SPI/Basic_SPI.ino:23:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Bolder_Flight_Systems_BMI088/src/BMI088.h:73:25: error: expected ')' before '&' token
Bmi088Accel(TwoWire &bus,uint8_t address);
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Bolder_Flight_Systems_BMI088/src/BMI088.h:74:26: error: expected ')' before '&' token
Bmi088Accel(SPIClass &bus,uint8_t csPin);
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Bolder_Flight_Systems_BMI088/src/BMI088.h:76:17: error: 'Odr' was not declared in this scope
bool setOdr(Odr odr);
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Bolder_Flight_Systems_BMI088/src/BMI088.h:77:19: error: 'Range' was not declared in this scope
bool setRange(Range range);
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Bolder_Flight_Systems_BMI088/src/BMI088.h:78:22: error: 'PinMode' was not declared in this scope
bool pinModeInt1(PinMode mode, PinLevel level);
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Bolder_Flight_Systems_BMI088/src/BMI088.h:78:45: error: expected primary-expression before 'level'
bool pinModeInt1(PinMode mode, PinLevel level);
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Bolder_Flight_Systems_BMI088/src/BMI088.h:78:50: error: expression list treated as compound expression in initializer [-fpermissive]
bool pinModeInt1(PinMode mode, PinLevel level);
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Bolder_Flight_Systems_BMI088/src/BMI088.h:79:22: error: 'PinMode' was not declared in this scope
bool pinModeInt2(PinMode mode, PinLevel level);
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Bolder_Flight_Systems_BMI088/src/BMI088.h:79:45: error: expected primary-expression before 'level'
bool pinModeInt2(PinMode mode, PinLevel level);
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Bolder_Flight_Systems_BMI088/src/BMI088.h:79:50: error: expression list treated as compound expression in initializer [-fpermissive]
bool pinModeInt2(PinMode mode, PinLevel level);
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Bolder_Flight_Systems_BMI088/src/BMI088.h:90:3: error: expected unqualified-id before 'private'
private:
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Bolder_Flight_Systems_BMI088/src/BMI088.h:187:32: error: 'PinMode' has not been declared
bool pinModeInt1(PinIO io, PinMode mode, PinLevel level);
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Bolder_Flight_Systems_BMI088/src/BMI088.h:187:60: error: 'bool pinModeInt1(PinIO, int, PinLevel)' redeclared as different kind of symbol
bool pinModeInt1(PinIO io, PinMode mode, PinLevel level);
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Bolder_Flight_Systems_BMI088/src/BMI088.h:78:10: note: previous declaration 'bool pinModeInt1'
bool pinModeInt1(PinMode mode, PinLevel level);
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Bolder_Flight_Systems_BMI088/src/BMI088.h:188:32: error: 'PinMode' has not been declared
bool pinModeInt2(PinIO io, PinMode mode, PinLevel level);
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Bolder_Flight_Systems_BMI088/src/BMI088.h:188:60: error: 'bool pinModeInt2(PinIO, int, PinLevel)' redeclared as different kind of symbol
bool pinModeInt2(PinIO io, PinMode mode, PinLevel level);
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Bolder_Flight_Systems_BMI088/src/BMI088.h:79:10: note: previous declaration 'bool pinModeInt2'
bool pinModeInt2(PinMode mode, PinLevel level);
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Bolder_Flight_Systems_BMI088/src/BMI088.h:205:1: error: expected declaration before '}' token
};
^
Result: FAIL
In file included from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/esp32/hardware/esp32/1.0.6/cores/esp32/esp32-hal.h:53:0,
from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/esp32/hardware/esp32/1.0.6/cores/esp32/Arduino.h:35,
from /tmp/arduino-sketch-79EE3499DD7F8598C642BD77C146F8EF/sketch/Int_I2C.ino.cpp:1:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/esp32/hardware/esp32/1.0.6/cores/esp32/esp32-hal-gpio.h:39:27: error: expected identifier before numeric constant
#define OPEN_DRAIN 0x10
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Bolder_Flight_Systems_BMI088/src/BMI088.h:67:7: note: in expansion of macro 'OPEN_DRAIN'
OPEN_DRAIN
^
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/esp32/hardware/esp32/1.0.6/cores/esp32/esp32-hal-gpio.h:39:27: error: expected '}' before numeric constant
#define OPEN_DRAIN 0x10
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Bolder_Flight_Systems_BMI088/src/BMI088.h:67:7: note: in expansion of macro 'OPEN_DRAIN'
OPEN_DRAIN
^
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/esp32/hardware/esp32/1.0.6/cores/esp32/esp32-hal-gpio.h:39:27: error: expected unqualified-id before numeric constant
#define OPEN_DRAIN 0x10
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Bolder_Flight_Systems_BMI088/src/BMI088.h:67:7: note: in expansion of macro 'OPEN_DRAIN'
OPEN_DRAIN
^
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Bolder_Flight_Systems_BMI088/examples/Int_I2C/Int_I2C.ino:23:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Bolder_Flight_Systems_BMI088/src/BMI088.h:73:25: error: expected ')' before '&' token
Bmi088Accel(TwoWire &bus,uint8_t address);
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Bolder_Flight_Systems_BMI088/src/BMI088.h:74:26: error: expected ')' before '&' token
Bmi088Accel(SPIClass &bus,uint8_t csPin);
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Bolder_Flight_Systems_BMI088/src/BMI088.h:76:17: error: 'Odr' was not declared in this scope
bool setOdr(Odr odr);
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Bolder_Flight_Systems_BMI088/src/BMI088.h:77:19: error: 'Range' was not declared in this scope
bool setRange(Range range);
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Bolder_Flight_Systems_BMI088/src/BMI088.h:78:22: error: 'PinMode' was not declared in this scope
bool pinModeInt1(PinMode mode, PinLevel level);
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Bolder_Flight_Systems_BMI088/src/BMI088.h:78:45: error: expected primary-expression before 'level'
bool pinModeInt1(PinMode mode, PinLevel level);
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Bolder_Flight_Systems_BMI088/src/BMI088.h:78:50: error: expression list treated as compound expression in initializer [-fpermissive]
bool pinModeInt1(PinMode mode, PinLevel level);
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Bolder_Flight_Systems_BMI088/src/BMI088.h:79:22: error: 'PinMode' was not declared in this scope
bool pinModeInt2(PinMode mode, PinLevel level);
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Bolder_Flight_Systems_BMI088/src/BMI088.h:79:45: error: expected primary-expression before 'level'
bool pinModeInt2(PinMode mode, PinLevel level);
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Bolder_Flight_Systems_BMI088/src/BMI088.h:79:50: error: expression list treated as compound expression in initializer [-fpermissive]
bool pinModeInt2(PinMode mode, PinLevel level);
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Bolder_Flight_Systems_BMI088/src/BMI088.h:90:3: error: expected unqualified-id before 'private'
private:
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Bolder_Flight_Systems_BMI088/src/BMI088.h:187:32: error: 'PinMode' has not been declared
bool pinModeInt1(PinIO io, PinMode mode, PinLevel level);
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Bolder_Flight_Systems_BMI088/src/BMI088.h:187:60: error: 'bool pinModeInt1(PinIO, int, PinLevel)' redeclared as different kind of symbol
bool pinModeInt1(PinIO io, PinMode mode, PinLevel level);
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Bolder_Flight_Systems_BMI088/src/BMI088.h:78:10: note: previous declaration 'bool pinModeInt1'
bool pinModeInt1(PinMode mode, PinLevel level);
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Bolder_Flight_Systems_BMI088/src/BMI088.h:188:32: error: 'PinMode' has not been declared
bool pinModeInt2(PinIO io, PinMode mode, PinLevel level);
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Bolder_Flight_Systems_BMI088/src/BMI088.h:188:60: error: 'bool pinModeInt2(PinIO, int, PinLevel)' redeclared as different kind of symbol
bool pinModeInt2(PinIO io, PinMode mode, PinLevel level);
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Bolder_Flight_Systems_BMI088/src/BMI088.h:79:10: note: previous declaration 'bool pinModeInt2'
bool pinModeInt2(PinMode mode, PinLevel level);
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Bolder_Flight_Systems_BMI088/src/BMI088.h:205:1: error: expected declaration before '}' token
};
^
Result: FAIL
In file included from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/esp32/hardware/esp32/1.0.6/cores/esp32/esp32-hal.h:53:0,
from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/esp32/hardware/esp32/1.0.6/cores/esp32/Arduino.h:35,
from /tmp/arduino-sketch-4B3568B8F2BADBCD8CBA728A2C2E0693/sketch/Sync_SPI.ino.cpp:1:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/esp32/hardware/esp32/1.0.6/cores/esp32/esp32-hal-gpio.h:39:27: error: expected identifier before numeric constant
#define OPEN_DRAIN 0x10
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Bolder_Flight_Systems_BMI088/src/BMI088.h:67:7: note: in expansion of macro 'OPEN_DRAIN'
OPEN_DRAIN
^
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/esp32/hardware/esp32/1.0.6/cores/esp32/esp32-hal-gpio.h:39:27: error: expected '}' before numeric constant
#define OPEN_DRAIN 0x10
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Bolder_Flight_Systems_BMI088/src/BMI088.h:67:7: note: in expansion of macro 'OPEN_DRAIN'
OPEN_DRAIN
^
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/esp32/hardware/esp32/1.0.6/cores/esp32/esp32-hal-gpio.h:39:27: error: expected unqualified-id before numeric constant
#define OPEN_DRAIN 0x10
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Bolder_Flight_Systems_BMI088/src/BMI088.h:67:7: note: in expansion of macro 'OPEN_DRAIN'
OPEN_DRAIN
^
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Bolder_Flight_Systems_BMI088/examples/Sync_SPI/Sync_SPI.ino:23:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Bolder_Flight_Systems_BMI088/src/BMI088.h:73:25: error: expected ')' before '&' token
Bmi088Accel(TwoWire &bus,uint8_t address);
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Bolder_Flight_Systems_BMI088/src/BMI088.h:74:26: error: expected ')' before '&' token
Bmi088Accel(SPIClass &bus,uint8_t csPin);
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Bolder_Flight_Systems_BMI088/src/BMI088.h:76:17: error: 'Odr' was not declared in this scope
bool setOdr(Odr odr);
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Bolder_Flight_Systems_BMI088/src/BMI088.h:77:19: error: 'Range' was not declared in this scope
bool setRange(Range range);
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Bolder_Flight_Systems_BMI088/src/BMI088.h:78:22: error: 'PinMode' was not declared in this scope
bool pinModeInt1(PinMode mode, PinLevel level);
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Bolder_Flight_Systems_BMI088/src/BMI088.h:78:45: error: expected primary-expression before 'level'
bool pinModeInt1(PinMode mode, PinLevel level);
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Bolder_Flight_Systems_BMI088/src/BMI088.h:78:50: error: expression list treated as compound expression in initializer [-fpermissive]
bool pinModeInt1(PinMode mode, PinLevel level);
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Bolder_Flight_Systems_BMI088/src/BMI088.h:79:22: error: 'PinMode' was not declared in this scope
bool pinModeInt2(PinMode mode, PinLevel level);
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Bolder_Flight_Systems_BMI088/src/BMI088.h:79:45: error: expected primary-expression before 'level'
bool pinModeInt2(PinMode mode, PinLevel level);
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Bolder_Flight_Systems_BMI088/src/BMI088.h:79:50: error: expression list treated as compound expression in initializer [-fpermissive]
bool pinModeInt2(PinMode mode, PinLevel level);
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Bolder_Flight_Systems_BMI088/src/BMI088.h:90:3: error: expected unqualified-id before 'private'
private:
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Bolder_Flight_Systems_BMI088/src/BMI088.h:187:32: error: 'PinMode' has not been declared
bool pinModeInt1(PinIO io, PinMode mode, PinLevel level);
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Bolder_Flight_Systems_BMI088/src/BMI088.h:187:60: error: 'bool pinModeInt1(PinIO, int, PinLevel)' redeclared as different kind of symbol
bool pinModeInt1(PinIO io, PinMode mode, PinLevel level);
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Bolder_Flight_Systems_BMI088/src/BMI088.h:78:10: note: previous declaration 'bool pinModeInt1'
bool pinModeInt1(PinMode mode, PinLevel level);
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Bolder_Flight_Systems_BMI088/src/BMI088.h:188:32: error: 'PinMode' has not been declared
bool pinModeInt2(PinIO io, PinMode mode, PinLevel level);
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Bolder_Flight_Systems_BMI088/src/BMI088.h:188:60: error: 'bool pinModeInt2(PinIO, int, PinLevel)' redeclared as different kind of symbol
bool pinModeInt2(PinIO io, PinMode mode, PinLevel level);
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Bolder_Flight_Systems_BMI088/src/BMI088.h:79:10: note: previous declaration 'bool pinModeInt2'
bool pinModeInt2(PinMode mode, PinLevel level);
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Bolder_Flight_Systems_BMI088/src/BMI088.h:205:1: error: expected declaration before '}' token
};
^