CMMC_NB-IoT - compatibility matrix

This report was generated on Wednesday, 23-Feb-22 22:48:15 CET using arduino-testlib.

CMMC_NB-IoT

Version: 0.0.3
More details

Compatibility matrix

Board	Claims compatibility	Inclusion	AT-bridge_uno	hwserial_example	AT-bridge_hardware_serial
arduino:avr:uno 1.8.4	Yes	PASS	PASS	FAIL	FAIL
arduino:mbed_nano:nanorp2040connect 2.7.2	No ⚠️	PASS	FAIL	FAIL	PASS
arduino:megaavr:nona4809 1.8.7	No ⚠️	PASS	FAIL	FAIL	FAIL
arduino:samd:mkrwifi1010 1.8.12	No ⚠️	PASS	FAIL	FAIL	PASS
esp32:esp32:d1_mini32 1.0.6	No ⚠️	PASS	FAIL	FAIL	PASS

Compilation logs

arduino:avr:uno @ 1.8.4

Inclusion

Result: PASS
This library has no main header file so an empty one was created.

Sketch uses 444 bytes (1%) of program storage space. Maximum is 32256 bytes.
Global variables use 9 bytes (0%) of dynamic memory, leaving 2039 bytes for local variables. Maximum is 2048 bytes.

examples/AT-bridge_hardware_serial

Result: FAIL

/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/CMMC_NB-IoT/examples/AT-bridge_hardware_serial/AT-bridge_hardware_serial.ino: In function 'void setup()':
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/CMMC_NB-IoT/examples/AT-bridge_hardware_serial/AT-bridge_hardware_serial.ino:10:3: error: 'Serial2' was not declared in this scope
   Serial2.begin(9600);
   ^~~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/CMMC_NB-IoT/examples/AT-bridge_hardware_serial/AT-bridge_hardware_serial.ino:10:3: note: suggested alternative: 'Serial'
   Serial2.begin(9600);
   ^~~~~~~
   Serial

examples/AT-bridge_uno

Result: PASS

Sketch uses 8120 bytes (25%) of program storage space. Maximum is 32256 bytes.
Global variables use 944 bytes (46%) of dynamic memory, leaving 1104 bytes for local variables. Maximum is 2048 bytes.

examples/hwserial_example

Result: FAIL

/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/CMMC_NB-IoT/examples/hwserial_example/hwserial_example.ino:7:17: error: 'Serial2' was not declared in this scope
 CMMC_NB_IoT nb(&Serial2);
                 ^~~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/CMMC_NB-IoT/examples/hwserial_example/hwserial_example.ino:7:17: note: suggested alternative: 'Serial'
 CMMC_NB_IoT nb(&Serial2);
                 ^~~~~~~
                 Serial
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/CMMC_NB-IoT/examples/hwserial_example/hwserial_example.ino: In function 'void setup()':
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/CMMC_NB-IoT/examples/hwserial_example/hwserial_example.ino:12:3: error: 'Serial2' was not declared in this scope
   Serial2.begin(9600);
   ^~~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/CMMC_NB-IoT/examples/hwserial_example/hwserial_example.ino:12:3: note: suggested alternative: 'Serial'
   Serial2.begin(9600);
   ^~~~~~~
   Serial
Multiple libraries were found for "AltSoftSerial.h"
  Used: /Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/AltSoftSerial
  Not used: /Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800
  Not used: /Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/AIS_NB_BC95

arduino:mbed_nano:nanorp2040connect @ 2.7.2

Inclusion

Result: PASS

WARNING: library CMMC_NB-IoT claims to run on avr architecture(s) and may be incompatible with your current board which runs on mbed_nano architecture(s).
Sketch uses 78804 bytes (0%) of program storage space. Maximum is 16777216 bytes.
Global variables use 43464 bytes (16%) of dynamic memory, leaving 226872 bytes for local variables. Maximum is 270336 bytes.

examples/AT-bridge_hardware_serial

Result: PASS

WARNING: library CMMC_NB-IoT claims to run on avr architecture(s) and may be incompatible with your current board which runs on mbed_nano architecture(s).
Sketch uses 80348 bytes (0%) of program storage space. Maximum is 16777216 bytes.
Global variables use 43964 bytes (16%) of dynamic memory, leaving 226372 bytes for local variables. Maximum is 270336 bytes.

examples/AT-bridge_uno

Result: FAIL

WARNING: library CMMC_NB-IoT claims to run on avr architecture(s) and may be incompatible with your current board which runs on mbed_nano architecture(s).
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/CMMC_NB-IoT/examples/AT-bridge_uno/AT-bridge_uno.ino:3:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AIS_NB_BC95/src/AltSoftSerial.h: In static member function 'static void AltSoftSerial::begin(uint32_t)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AIS_NB_BC95/src/AltSoftSerial.h:39:25: error: 'F_CPU' was not declared in this scope
 #define ALTSS_BASE_FREQ F_CPU
                         ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AIS_NB_BC95/src/AltSoftSerial.h:47:43: note: in expansion of macro 'ALTSS_BASE_FREQ'
  static void begin(uint32_t baud) { init((ALTSS_BASE_FREQ + baud / 2) / baud); }
                                           ^~~~~~~~~~~~~~~
Multiple libraries were found for "AltSoftSerial.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AIS_NB_BC95
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AltSoftSerial

examples/hwserial_example

Result: FAIL

WARNING: library CMMC_NB-IoT claims to run on avr architecture(s) and may be incompatible with your current board which runs on mbed_nano architecture(s).
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/CMMC_NB-IoT/examples/hwserial_example/hwserial_example.ino:5:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AIS_NB_BC95/src/AltSoftSerial.h: In static member function 'static void AltSoftSerial::begin(uint32_t)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AIS_NB_BC95/src/AltSoftSerial.h:39:25: error: 'F_CPU' was not declared in this scope
 #define ALTSS_BASE_FREQ F_CPU
                         ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AIS_NB_BC95/src/AltSoftSerial.h:47:43: note: in expansion of macro 'ALTSS_BASE_FREQ'
  static void begin(uint32_t baud) { init((ALTSS_BASE_FREQ + baud / 2) / baud); }
                                           ^~~~~~~~~~~~~~~
Multiple libraries were found for "AltSoftSerial.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AIS_NB_BC95
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AltSoftSerial

arduino:megaavr:nona4809 @ 1.8.7

Inclusion

Result: PASS

WARNING: library CMMC_NB-IoT claims to run on avr architecture(s) and may be incompatible with your current board which runs on megaavr architecture(s).
Sketch uses 802 bytes (1%) of program storage space. Maximum is 49152 bytes.
Global variables use 22 bytes (0%) of dynamic memory, leaving 6122 bytes for local variables. Maximum is 6144 bytes.

examples/AT-bridge_hardware_serial

Result: FAIL

WARNING: library CMMC_NB-IoT claims to run on avr architecture(s) and may be incompatible with your current board which runs on megaavr architecture(s).
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/CMMC_NB-IoT/examples/AT-bridge_hardware_serial/AT-bridge_hardware_serial.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/CMMC_NB-IoT/examples/AT-bridge_hardware_serial/AT-bridge_hardware_serial.ino:10:3: error: 'Serial2' was not declared in this scope
   Serial2.begin(9600);
   ^~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/CMMC_NB-IoT/examples/AT-bridge_hardware_serial/AT-bridge_hardware_serial.ino:10:3: note: suggested alternative: 'Serial1'
   Serial2.begin(9600);
   ^~~~~~~
   Serial1

examples/AT-bridge_uno

Result: FAIL

WARNING: library CMMC_NB-IoT claims to run on avr architecture(s) and may be incompatible with your current board which runs on megaavr architecture(s).
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AIS_NB_BC95/src/AltSoftSerial.cpp:35:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AIS_NB_BC95/src/config/AltSoftSerial_Boards.h:136:2: error: #error "Please define your board timer and pins"
 #error "Please define your board timer and pins"
  ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AIS_NB_BC95/src/AltSoftSerial.cpp: In static member function 'static void AltSoftSerial::init(uint32_t)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AIS_NB_BC95/src/AltSoftSerial.cpp:74:3: error: 'CONFIG_TIMER_NOPRESCALE' was not declared in this scope
   CONFIG_TIMER_NOPRESCALE();
   ^~~~~~~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AIS_NB_BC95/src/AltSoftSerial.cpp:79:4: error: 'CONFIG_TIMER_PRESCALE_8' was not declared in this scope
    CONFIG_TIMER_PRESCALE_8();
    ^~~~~~~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AIS_NB_BC95/src/AltSoftSerial.cpp:104:10: error: 'INPUT_CAPTURE_PIN' was not declared in this scope
  pinMode(INPUT_CAPTURE_PIN, INPUT_PULLUP);
          ^~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AIS_NB_BC95/src/AltSoftSerial.cpp:104:10: note: suggested alternative: 'INPUT_PULLDOWN'
  pinMode(INPUT_CAPTURE_PIN, INPUT_PULLUP);
          ^~~~~~~~~~~~~~~~~
          INPUT_PULLDOWN
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AIS_NB_BC95/src/AltSoftSerial.cpp:105:15: error: 'OUTPUT_COMPARE_A_PIN' was not declared in this scope
  digitalWrite(OUTPUT_COMPARE_A_PIN, HIGH);
               ^~~~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AIS_NB_BC95/src/AltSoftSerial.cpp:113:2: error: 'ENABLE_INT_INPUT_CAPTURE' was not declared in this scope
  ENABLE_INT_INPUT_CAPTURE();
  ^~~~~~~~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AIS_NB_BC95/src/AltSoftSerial.cpp: In static member function 'static void AltSoftSerial::end()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AIS_NB_BC95/src/AltSoftSerial.cpp:118:2: error: 'DISABLE_INT_COMPARE_B' was not declared in this scope
  DISABLE_INT_COMPARE_B();
  ^~~~~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AIS_NB_BC95/src/AltSoftSerial.cpp:119:2: error: 'DISABLE_INT_INPUT_CAPTURE' was not declared in this scope
  DISABLE_INT_INPUT_CAPTURE();
  ^~~~~~~~~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AIS_NB_BC95/src/AltSoftSerial.cpp:122:2: error: 'DISABLE_INT_COMPARE_A' was not declared in this scope
  DISABLE_INT_COMPARE_A();
  ^~~~~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AIS_NB_BC95/src/AltSoftSerial.cpp: In static member function 'static void AltSoftSerial::writeByte(uint8_t)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AIS_NB_BC95/src/AltSoftSerial.cpp:147:3: error: 'ENABLE_INT_COMPARE_A' was not declared in this scope
   ENABLE_INT_COMPARE_A();
   ^~~~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AIS_NB_BC95/src/AltSoftSerial.cpp:148:3: error: 'CONFIG_MATCH_CLEAR' was not declared in this scope
   CONFIG_MATCH_CLEAR();
   ^~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AIS_NB_BC95/src/AltSoftSerial.cpp:149:17: error: 'GET_TIMER_COUNT' was not declared in this scope
   SET_COMPARE_A(GET_TIMER_COUNT() + 16);
                 ^~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AIS_NB_BC95/src/AltSoftSerial.cpp:149:17: note: suggested alternative: 'PWM_TIMER_COMPARE'
   SET_COMPARE_A(GET_TIMER_COUNT() + 16);
                 ^~~~~~~~~~~~~~~
                 PWM_TIMER_COMPARE
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AIS_NB_BC95/src/AltSoftSerial.cpp:149:3: error: 'SET_COMPARE_A' was not declared in this scope
   SET_COMPARE_A(GET_TIMER_COUNT() + 16);
   ^~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AIS_NB_BC95/src/AltSoftSerial.cpp: In function 'void COMPARE_A_INTERRUPT()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AIS_NB_BC95/src/AltSoftSerial.cpp:162:11: error: 'GET_COMPARE_A' was not declared in this scope
  target = GET_COMPARE_A();
           ^~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AIS_NB_BC95/src/AltSoftSerial.cpp:173:5: error: 'CONFIG_MATCH_SET' was not declared in this scope
     CONFIG_MATCH_SET();
     ^~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AIS_NB_BC95/src/AltSoftSerial.cpp:175:5: error: 'CONFIG_MATCH_CLEAR' was not declared in this scope
     CONFIG_MATCH_CLEAR();
     ^~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AIS_NB_BC95/src/AltSoftSerial.cpp:177:4: error: 'SET_COMPARE_A' was not declared in this scope
    SET_COMPARE_A(target);
    ^~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AIS_NB_BC95/src/AltSoftSerial.cpp:191:4: error: 'SET_COMPARE_A' was not declared in this scope
    SET_COMPARE_A(target + ticks_per_bit);
    ^~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AIS_NB_BC95/src/AltSoftSerial.cpp:194:4: error: 'CONFIG_MATCH_NORMAL' was not declared in this scope
    CONFIG_MATCH_NORMAL();
    ^~~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AIS_NB_BC95/src/AltSoftSerial.cpp:195:4: error: 'DISABLE_INT_COMPARE_A' was not declared in this scope
    DISABLE_INT_COMPARE_A();
    ^~~~~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AIS_NB_BC95/src/AltSoftSerial.cpp:202:3: error: 'CONFIG_MATCH_CLEAR' was not declared in this scope
   CONFIG_MATCH_CLEAR();
   ^~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AIS_NB_BC95/src/AltSoftSerial.cpp:204:4: error: 'SET_COMPARE_A' was not declared in this scope
    SET_COMPARE_A(target + ticks_per_bit);
    ^~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AIS_NB_BC95/src/AltSoftSerial.cpp:206:18: error: 'GET_TIMER_COUNT' was not declared in this scope
    SET_COMPARE_A(GET_TIMER_COUNT() + 16);
                  ^~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AIS_NB_BC95/src/AltSoftSerial.cpp:206:18: note: suggested alternative: 'PWM_TIMER_COMPARE'
    SET_COMPARE_A(GET_TIMER_COUNT() + 16);
                  ^~~~~~~~~~~~~~~
                  PWM_TIMER_COMPARE
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AIS_NB_BC95/src/AltSoftSerial.cpp:206:4: error: 'SET_COMPARE_A' was not declared in this scope
    SET_COMPARE_A(GET_TIMER_COUNT() + 16);
    ^~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AIS_NB_BC95/src/AltSoftSerial.cpp: In function 'void CAPTURE_INTERRUPT()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AIS_NB_BC95/src/AltSoftSerial.cpp:228:12: error: 'GET_INPUT_CAPTURE' was not declared in this scope
  capture = GET_INPUT_CAPTURE();
            ^~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AIS_NB_BC95/src/AltSoftSerial.cpp:231:3: error: 'CONFIG_CAPTURE_FALLING_EDGE' was not declared in this scope
   CONFIG_CAPTURE_FALLING_EDGE();
   ^~~~~~~~~~~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AIS_NB_BC95/src/AltSoftSerial.cpp:234:3: error: 'CONFIG_CAPTURE_RISING_EDGE' was not declared in this scope
   CONFIG_CAPTURE_RISING_EDGE();
   ^~~~~~~~~~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AIS_NB_BC95/src/AltSoftSerial.cpp:241:4: error: 'SET_COMPARE_B' was not declared in this scope
    SET_COMPARE_B(end);
    ^~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AIS_NB_BC95/src/AltSoftSerial.cpp:242:4: error: 'ENABLE_INT_COMPARE_B' was not declared in this scope
    ENABLE_INT_COMPARE_B();
    ^~~~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AIS_NB_BC95/src/AltSoftSerial.cpp:256:5: error: 'DISABLE_INT_COMPARE_B' was not declared in this scope
     DISABLE_INT_COMPARE_B();
     ^~~~~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AIS_NB_BC95/src/AltSoftSerial.cpp:263:5: error: 'CONFIG_CAPTURE_FALLING_EDGE' was not declared in this scope
     CONFIG_CAPTURE_FALLING_EDGE();
     ^~~~~~~~~~~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AIS_NB_BC95/src/AltSoftSerial.cpp: In function 'void COMPARE_B_INTERRUPT()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AIS_NB_BC95/src/AltSoftSerial.cpp:279:2: error: 'DISABLE_INT_COMPARE_B' was not declared in this scope
  DISABLE_INT_COMPARE_B();
  ^~~~~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AIS_NB_BC95/src/AltSoftSerial.cpp:280:2: error: 'CONFIG_CAPTURE_FALLING_EDGE' was not declared in this scope
  CONFIG_CAPTURE_FALLING_EDGE();
  ^~~~~~~~~~~~~~~~~~~~~~~~~~~
Multiple libraries were found for "AltSoftSerial.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AIS_NB_BC95
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AltSoftSerial
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800

examples/hwserial_example

Result: FAIL

WARNING: library CMMC_NB-IoT claims to run on avr architecture(s) and may be incompatible with your current board which runs on megaavr architecture(s).
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/CMMC_NB-IoT/examples/hwserial_example/hwserial_example.ino:7:17: error: 'Serial2' was not declared in this scope
 CMMC_NB_IoT nb(&Serial2);
                 ^~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/CMMC_NB-IoT/examples/hwserial_example/hwserial_example.ino:7:17: note: suggested alternative: 'Serial1'
 CMMC_NB_IoT nb(&Serial2);
                 ^~~~~~~
                 Serial1
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/CMMC_NB-IoT/examples/hwserial_example/hwserial_example.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/CMMC_NB-IoT/examples/hwserial_example/hwserial_example.ino:12:3: error: 'Serial2' was not declared in this scope
   Serial2.begin(9600);
   ^~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/CMMC_NB-IoT/examples/hwserial_example/hwserial_example.ino:12:3: note: suggested alternative: 'Serial1'
   Serial2.begin(9600);
   ^~~~~~~
   Serial1
Multiple libraries were found for "AltSoftSerial.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AIS_NB_BC95
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AltSoftSerial

arduino:samd:mkrwifi1010 @ 1.8.12

Inclusion

Result: PASS
This library has no main header file so an empty one was created.

WARNING: library CMMC_NB-IoT claims to run on avr architecture(s) and may be incompatible with your current board which runs on samd architecture(s).
Sketch uses 12156 bytes (4%) of program storage space. Maximum is 262144 bytes.
Global variables use 2996 bytes (9%) of dynamic memory, leaving 29772 bytes for local variables. Maximum is 32768 bytes.

examples/AT-bridge_hardware_serial

Result: PASS

WARNING: library CMMC_NB-IoT claims to run on avr architecture(s) and may be incompatible with your current board which runs on samd architecture(s).
Sketch uses 30684 bytes (11%) of program storage space. Maximum is 262144 bytes.
Global variables use 3864 bytes (11%) of dynamic memory, leaving 28904 bytes for local variables. Maximum is 32768 bytes.

examples/AT-bridge_uno

Result: FAIL

WARNING: library CMMC_NB-IoT claims to run on avr architecture(s) and may be incompatible with your current board which runs on samd architecture(s).
Multiple libraries were found for "AltSoftSerial.h"
  Used: /Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/AIS_NB_BC95
  Not used: /Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/AltSoftSerial
  Not used: /Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800

examples/hwserial_example

Result: FAIL

WARNING: library CMMC_NB-IoT claims to run on avr architecture(s) and may be incompatible with your current board which runs on samd architecture(s).
Multiple libraries were found for "AltSoftSerial.h"
  Used: /Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/AIS_NB_BC95
  Not used: /Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800
  Not used: /Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/AltSoftSerial

esp32:esp32:d1_mini32 @ 1.0.6

Inclusion

Result: PASS

WARNING: library CMMC_NB-IoT claims to run on avr architecture(s) and may be incompatible with your current board which runs on esp32 architecture(s).
Sketch uses 199110 bytes (15%) of program storage space. Maximum is 1310720 bytes.
Global variables use 13112 bytes (4%) of dynamic memory, leaving 314568 bytes for local variables. Maximum is 327680 bytes.

examples/AT-bridge_hardware_serial

Result: PASS

WARNING: library CMMC_NB-IoT claims to run on avr architecture(s) and may be incompatible with your current board which runs on esp32 architecture(s).
Sketch uses 207334 bytes (15%) of program storage space. Maximum is 1310720 bytes.
Global variables use 13928 bytes (4%) of dynamic memory, leaving 313752 bytes for local variables. Maximum is 327680 bytes.

examples/AT-bridge_uno

Result: FAIL

WARNING: library CMMC_NB-IoT claims to run on avr architecture(s) and may be incompatible with your current board which runs on esp32 architecture(s).
Multiple libraries were found for "AltSoftSerial.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AIS_NB_BC95
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AltSoftSerial
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800

examples/hwserial_example

Result: FAIL

WARNING: library CMMC_NB-IoT claims to run on avr architecture(s) and may be incompatible with your current board which runs on esp32 architecture(s).
In file included from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/esp32/hardware/esp32/1.0.6/tools/sdk/include/newlib/stdio.h:47:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/esp32/hardware/esp32/1.0.6/cores/esp32/Arduino.h:27,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/CMMC_NB-IoT/examples/hwserial_example/hwserial_example.ino:3:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/esp32/hardware/esp32/1.0.6/tools/sdk/include/newlib/sys/reent.h:463:10: error: #if with no expression
Multiple libraries were found for "AltSoftSerial.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AIS_NB_BC95
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AltSoftSerial