This report was generated on Wednesday, 23-Feb-22 22:48:15 CET using arduino-testlib.
Version: 0.1.1
More details
| Board | Claims compatibility | Inclusion | Yaw_Pitch_Roll_6dof_example |
Hard_Iron_Offset_6dof_example |
Tilt_comp_6dof_example |
|---|---|---|---|---|---|
|
arduino:avr:uno
1.8.4 |
Yes | PASS | FAIL | FAIL | FAIL |
|
arduino:mbed_nano:nanorp2040connect
2.7.2 |
No ⚠️ | PASS | FAIL | FAIL | FAIL |
|
arduino:megaavr:nona4809
1.8.7 |
No ⚠️ | PASS | FAIL | FAIL | FAIL |
|
arduino:samd:mkrwifi1010
1.8.12 |
No ⚠️ | PASS | FAIL | FAIL | FAIL |
|
esp32:esp32:d1_mini32
1.0.6 |
No ⚠️ | PASS | FAIL | FAIL | FAIL |
Result: PASS
Sketch uses 444 bytes (1%) of program storage space. Maximum is 32256 bytes. Global variables use 9 bytes (0%) of dynamic memory, leaving 2039 bytes for local variables. Maximum is 2048 bytes.
Result: FAIL
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/Comp6DOF_n0m1/examples/Hard_Iron_Offset_6dof_example/Hard_Iron_Offset_6dof_example.ino:11:10: fatal error: I2C.h: No such file or directory
#include <I2C.h>
^~~~~~~
compilation terminated.
Result: FAIL
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/Comp6DOF_n0m1/examples/Tilt_comp_6dof_example/Tilt_comp_6dof_example.ino:11:10: fatal error: I2C.h: No such file or directory
#include <I2C.h>
^~~~~~~
compilation terminated.
Result: FAIL
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/Comp6DOF_n0m1/examples/Yaw_Pitch_Roll_6dof_example/Yaw_Pitch_Roll_6dof_example.ino:11:10: fatal error: I2C.h: No such file or directory
#include <I2C.h>
^~~~~~~
compilation terminated.
Result: PASS
WARNING: library Comp6DOF_n0m1 claims to run on avr architecture(s) and may be incompatible with your current board which runs on mbed_nano architecture(s). Sketch uses 78756 bytes (0%) of program storage space. Maximum is 16777216 bytes. Global variables use 43444 bytes (16%) of dynamic memory, leaving 226892 bytes for local variables. Maximum is 270336 bytes.
Result: FAIL
WARNING: library MMA8453_n0m1 claims to run on avr architecture(s) and may be incompatible with your current board which runs on mbed_nano architecture(s).
WARNING: library Comp6DOF_n0m1 claims to run on avr architecture(s) and may be incompatible with your current board which runs on mbed_nano architecture(s).
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Comp6DOF_n0m1/examples/Hard_Iron_Offset_6dof_example/Hard_Iron_Offset_6dof_example.ino:21:5: error: 'int error' redeclared as different kind of symbol
int error = 0;
^~~~~
In file included from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/cores/arduino/mbed/rtos/include/rtos/Queue.h:30:0,
from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/cores/arduino/mbed/rtos/include/rtos/Mail.h:29,
from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/cores/arduino/mbed/rtos/include/rtos/rtos.h:33,
from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/libraries/Wire/Wire.h:28,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MMA8453_n0m1/MMA8453_n0m1.h:54,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Comp6DOF_n0m1/examples/Hard_Iron_Offset_6dof_example/Hard_Iron_Offset_6dof_example.ino:12:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/cores/arduino/mbed/platform/include/platform/mbed_error.h:896:20: note: previous declaration 'void error(const char*, ...)'
MBED_NORETURN void error(const char *format, ...) MBED_PRINTF(1, 2);
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Comp6DOF_n0m1/examples/Hard_Iron_Offset_6dof_example/Hard_Iron_Offset_6dof_example.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Comp6DOF_n0m1/examples/Hard_Iron_Offset_6dof_example/Hard_Iron_Offset_6dof_example.ino:31:19: error: 'class HMC5883L' has no member named 'SetScale'; did you mean 'setScale'?
error = compass.SetScale(1.3); // Set the scale of the compass.
^~~~~~~~
setScale
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Comp6DOF_n0m1/examples/Hard_Iron_Offset_6dof_example/Hard_Iron_Offset_6dof_example.ino:33:28: error: 'class HMC5883L' has no member named 'GetErrorText'; did you mean 'getErrorText'?
Serial.println(compass.GetErrorText(error));
^~~~~~~~~~~~
getErrorText
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Comp6DOF_n0m1/examples/Hard_Iron_Offset_6dof_example/Hard_Iron_Offset_6dof_example.ino:35:19: error: 'class HMC5883L' has no member named 'SetMeasurementMode'; did you mean 'setMeasurementMode'?
error = compass.SetMeasurementMode(Measurement_Continuous); // Set the measurement mode to Continuous
^~~~~~~~~~~~~~~~~~
setMeasurementMode
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Comp6DOF_n0m1/examples/Hard_Iron_Offset_6dof_example/Hard_Iron_Offset_6dof_example.ino:35:38: error: 'Measurement_Continuous' was not declared in this scope
error = compass.SetMeasurementMode(Measurement_Continuous); // Set the measurement mode to Continuous
^~~~~~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Comp6DOF_n0m1/examples/Hard_Iron_Offset_6dof_example/Hard_Iron_Offset_6dof_example.ino:37:28: error: 'class HMC5883L' has no member named 'GetErrorText'; did you mean 'getErrorText'?
Serial.println(compass.GetErrorText(error));
^~~~~~~~~~~~
getErrorText
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Comp6DOF_n0m1/examples/Hard_Iron_Offset_6dof_example/Hard_Iron_Offset_6dof_example.ino:50:38: error: 'class HMC5883L' has no member named 'ReadRawAxis'; did you mean 'readRawAxis'?
MagnetometerRaw raw = compass.ReadRawAxis();
^~~~~~~~~~~
readRawAxis
Result: FAIL
WARNING: library MMA8453_n0m1 claims to run on avr architecture(s) and may be incompatible with your current board which runs on mbed_nano architecture(s).
WARNING: library Comp6DOF_n0m1 claims to run on avr architecture(s) and may be incompatible with your current board which runs on mbed_nano architecture(s).
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Comp6DOF_n0m1/examples/Tilt_comp_6dof_example/Tilt_comp_6dof_example.ino:21:5: error: 'int error' redeclared as different kind of symbol
int error = 0;
^~~~~
In file included from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/cores/arduino/mbed/rtos/include/rtos/Queue.h:30:0,
from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/cores/arduino/mbed/rtos/include/rtos/Mail.h:29,
from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/cores/arduino/mbed/rtos/include/rtos/rtos.h:33,
from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/libraries/Wire/Wire.h:28,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MMA8453_n0m1/MMA8453_n0m1.h:54,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Comp6DOF_n0m1/examples/Tilt_comp_6dof_example/Tilt_comp_6dof_example.ino:12:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/cores/arduino/mbed/platform/include/platform/mbed_error.h:896:20: note: previous declaration 'void error(const char*, ...)'
MBED_NORETURN void error(const char *format, ...) MBED_PRINTF(1, 2);
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Comp6DOF_n0m1/examples/Tilt_comp_6dof_example/Tilt_comp_6dof_example.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Comp6DOF_n0m1/examples/Tilt_comp_6dof_example/Tilt_comp_6dof_example.ino:31:19: error: 'class HMC5883L' has no member named 'SetScale'; did you mean 'setScale'?
error = compass.SetScale(1.3); // Set the scale of the compass.
^~~~~~~~
setScale
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Comp6DOF_n0m1/examples/Tilt_comp_6dof_example/Tilt_comp_6dof_example.ino:33:28: error: 'class HMC5883L' has no member named 'GetErrorText'; did you mean 'getErrorText'?
Serial.println(compass.GetErrorText(error));
^~~~~~~~~~~~
getErrorText
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Comp6DOF_n0m1/examples/Tilt_comp_6dof_example/Tilt_comp_6dof_example.ino:35:19: error: 'class HMC5883L' has no member named 'SetMeasurementMode'; did you mean 'setMeasurementMode'?
error = compass.SetMeasurementMode(Measurement_Continuous); // Set the measurement mode to Continuous
^~~~~~~~~~~~~~~~~~
setMeasurementMode
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Comp6DOF_n0m1/examples/Tilt_comp_6dof_example/Tilt_comp_6dof_example.ino:35:38: error: 'Measurement_Continuous' was not declared in this scope
error = compass.SetMeasurementMode(Measurement_Continuous); // Set the measurement mode to Continuous
^~~~~~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Comp6DOF_n0m1/examples/Tilt_comp_6dof_example/Tilt_comp_6dof_example.ino:37:28: error: 'class HMC5883L' has no member named 'GetErrorText'; did you mean 'getErrorText'?
Serial.println(compass.GetErrorText(error));
^~~~~~~~~~~~
getErrorText
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Comp6DOF_n0m1/examples/Tilt_comp_6dof_example/Tilt_comp_6dof_example.ino: In function 'void loop()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Comp6DOF_n0m1/examples/Tilt_comp_6dof_example/Tilt_comp_6dof_example.ino:48:33: error: 'class HMC5883L' has no member named 'ReadRawAxis'; did you mean 'readRawAxis'?
MagnetometerRaw raw = compass.ReadRawAxis();
^~~~~~~~~~~
readRawAxis
Result: FAIL
WARNING: library MMA8453_n0m1 claims to run on avr architecture(s) and may be incompatible with your current board which runs on mbed_nano architecture(s).
WARNING: library Comp6DOF_n0m1 claims to run on avr architecture(s) and may be incompatible with your current board which runs on mbed_nano architecture(s).
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Comp6DOF_n0m1/examples/Yaw_Pitch_Roll_6dof_example/Yaw_Pitch_Roll_6dof_example.ino:21:5: error: 'int error' redeclared as different kind of symbol
int error = 0;
^~~~~
In file included from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/cores/arduino/mbed/rtos/include/rtos/Queue.h:30:0,
from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/cores/arduino/mbed/rtos/include/rtos/Mail.h:29,
from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/cores/arduino/mbed/rtos/include/rtos/rtos.h:33,
from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/libraries/Wire/Wire.h:28,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MMA8453_n0m1/MMA8453_n0m1.h:54,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Comp6DOF_n0m1/examples/Yaw_Pitch_Roll_6dof_example/Yaw_Pitch_Roll_6dof_example.ino:12:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/cores/arduino/mbed/platform/include/platform/mbed_error.h:896:20: note: previous declaration 'void error(const char*, ...)'
MBED_NORETURN void error(const char *format, ...) MBED_PRINTF(1, 2);
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Comp6DOF_n0m1/examples/Yaw_Pitch_Roll_6dof_example/Yaw_Pitch_Roll_6dof_example.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Comp6DOF_n0m1/examples/Yaw_Pitch_Roll_6dof_example/Yaw_Pitch_Roll_6dof_example.ino:31:19: error: 'class HMC5883L' has no member named 'SetScale'; did you mean 'setScale'?
error = compass.SetScale(1.3); // Set the scale of the compass.
^~~~~~~~
setScale
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Comp6DOF_n0m1/examples/Yaw_Pitch_Roll_6dof_example/Yaw_Pitch_Roll_6dof_example.ino:33:28: error: 'class HMC5883L' has no member named 'GetErrorText'; did you mean 'getErrorText'?
Serial.println(compass.GetErrorText(error));
^~~~~~~~~~~~
getErrorText
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Comp6DOF_n0m1/examples/Yaw_Pitch_Roll_6dof_example/Yaw_Pitch_Roll_6dof_example.ino:35:19: error: 'class HMC5883L' has no member named 'SetMeasurementMode'; did you mean 'setMeasurementMode'?
error = compass.SetMeasurementMode(Measurement_Continuous); // Set the measurement mode to Continuous
^~~~~~~~~~~~~~~~~~
setMeasurementMode
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Comp6DOF_n0m1/examples/Yaw_Pitch_Roll_6dof_example/Yaw_Pitch_Roll_6dof_example.ino:35:38: error: 'Measurement_Continuous' was not declared in this scope
error = compass.SetMeasurementMode(Measurement_Continuous); // Set the measurement mode to Continuous
^~~~~~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Comp6DOF_n0m1/examples/Yaw_Pitch_Roll_6dof_example/Yaw_Pitch_Roll_6dof_example.ino:37:28: error: 'class HMC5883L' has no member named 'GetErrorText'; did you mean 'getErrorText'?
Serial.println(compass.GetErrorText(error));
^~~~~~~~~~~~
getErrorText
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Comp6DOF_n0m1/examples/Yaw_Pitch_Roll_6dof_example/Yaw_Pitch_Roll_6dof_example.ino: In function 'void loop()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Comp6DOF_n0m1/examples/Yaw_Pitch_Roll_6dof_example/Yaw_Pitch_Roll_6dof_example.ino:65:33: error: 'class HMC5883L' has no member named 'ReadRawAxis'; did you mean 'readRawAxis'?
MagnetometerRaw raw = compass.ReadRawAxis();
^~~~~~~~~~~
readRawAxis
Result: PASS
WARNING: library Comp6DOF_n0m1 claims to run on avr architecture(s) and may be incompatible with your current board which runs on megaavr architecture(s). Sketch uses 802 bytes (1%) of program storage space. Maximum is 49152 bytes. Global variables use 22 bytes (0%) of dynamic memory, leaving 6122 bytes for local variables. Maximum is 6144 bytes.
Result: FAIL
WARNING: library MMA8453_n0m1 claims to run on avr architecture(s) and may be incompatible with your current board which runs on megaavr architecture(s).
WARNING: library Comp6DOF_n0m1 claims to run on avr architecture(s) and may be incompatible with your current board which runs on megaavr architecture(s).
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Comp6DOF_n0m1/examples/Hard_Iron_Offset_6dof_example/Hard_Iron_Offset_6dof_example.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Comp6DOF_n0m1/examples/Hard_Iron_Offset_6dof_example/Hard_Iron_Offset_6dof_example.ino:31:19: error: 'class HMC5883L' has no member named 'SetScale'; did you mean 'setScale'?
error = compass.SetScale(1.3); // Set the scale of the compass.
^~~~~~~~
setScale
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Comp6DOF_n0m1/examples/Hard_Iron_Offset_6dof_example/Hard_Iron_Offset_6dof_example.ino:33:28: error: 'class HMC5883L' has no member named 'GetErrorText'; did you mean 'getErrorText'?
Serial.println(compass.GetErrorText(error));
^~~~~~~~~~~~
getErrorText
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Comp6DOF_n0m1/examples/Hard_Iron_Offset_6dof_example/Hard_Iron_Offset_6dof_example.ino:35:19: error: 'class HMC5883L' has no member named 'SetMeasurementMode'; did you mean 'setMeasurementMode'?
error = compass.SetMeasurementMode(Measurement_Continuous); // Set the measurement mode to Continuous
^~~~~~~~~~~~~~~~~~
setMeasurementMode
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Comp6DOF_n0m1/examples/Hard_Iron_Offset_6dof_example/Hard_Iron_Offset_6dof_example.ino:35:38: error: 'Measurement_Continuous' was not declared in this scope
error = compass.SetMeasurementMode(Measurement_Continuous); // Set the measurement mode to Continuous
^~~~~~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Comp6DOF_n0m1/examples/Hard_Iron_Offset_6dof_example/Hard_Iron_Offset_6dof_example.ino:37:28: error: 'class HMC5883L' has no member named 'GetErrorText'; did you mean 'getErrorText'?
Serial.println(compass.GetErrorText(error));
^~~~~~~~~~~~
getErrorText
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Comp6DOF_n0m1/examples/Hard_Iron_Offset_6dof_example/Hard_Iron_Offset_6dof_example.ino:50:38: error: 'class HMC5883L' has no member named 'ReadRawAxis'; did you mean 'readRawAxis'?
MagnetometerRaw raw = compass.ReadRawAxis();
^~~~~~~~~~~
readRawAxis
Result: FAIL
WARNING: library MMA8453_n0m1 claims to run on avr architecture(s) and may be incompatible with your current board which runs on megaavr architecture(s).
WARNING: library Comp6DOF_n0m1 claims to run on avr architecture(s) and may be incompatible with your current board which runs on megaavr architecture(s).
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Comp6DOF_n0m1/examples/Tilt_comp_6dof_example/Tilt_comp_6dof_example.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Comp6DOF_n0m1/examples/Tilt_comp_6dof_example/Tilt_comp_6dof_example.ino:31:19: error: 'class HMC5883L' has no member named 'SetScale'; did you mean 'setScale'?
error = compass.SetScale(1.3); // Set the scale of the compass.
^~~~~~~~
setScale
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Comp6DOF_n0m1/examples/Tilt_comp_6dof_example/Tilt_comp_6dof_example.ino:33:28: error: 'class HMC5883L' has no member named 'GetErrorText'; did you mean 'getErrorText'?
Serial.println(compass.GetErrorText(error));
^~~~~~~~~~~~
getErrorText
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Comp6DOF_n0m1/examples/Tilt_comp_6dof_example/Tilt_comp_6dof_example.ino:35:19: error: 'class HMC5883L' has no member named 'SetMeasurementMode'; did you mean 'setMeasurementMode'?
error = compass.SetMeasurementMode(Measurement_Continuous); // Set the measurement mode to Continuous
^~~~~~~~~~~~~~~~~~
setMeasurementMode
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Comp6DOF_n0m1/examples/Tilt_comp_6dof_example/Tilt_comp_6dof_example.ino:35:38: error: 'Measurement_Continuous' was not declared in this scope
error = compass.SetMeasurementMode(Measurement_Continuous); // Set the measurement mode to Continuous
^~~~~~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Comp6DOF_n0m1/examples/Tilt_comp_6dof_example/Tilt_comp_6dof_example.ino:37:28: error: 'class HMC5883L' has no member named 'GetErrorText'; did you mean 'getErrorText'?
Serial.println(compass.GetErrorText(error));
^~~~~~~~~~~~
getErrorText
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Comp6DOF_n0m1/examples/Tilt_comp_6dof_example/Tilt_comp_6dof_example.ino: In function 'void loop()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Comp6DOF_n0m1/examples/Tilt_comp_6dof_example/Tilt_comp_6dof_example.ino:48:33: error: 'class HMC5883L' has no member named 'ReadRawAxis'; did you mean 'readRawAxis'?
MagnetometerRaw raw = compass.ReadRawAxis();
^~~~~~~~~~~
readRawAxis
Result: FAIL
WARNING: library MMA8453_n0m1 claims to run on avr architecture(s) and may be incompatible with your current board which runs on megaavr architecture(s).
WARNING: library Comp6DOF_n0m1 claims to run on avr architecture(s) and may be incompatible with your current board which runs on megaavr architecture(s).
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Comp6DOF_n0m1/examples/Yaw_Pitch_Roll_6dof_example/Yaw_Pitch_Roll_6dof_example.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Comp6DOF_n0m1/examples/Yaw_Pitch_Roll_6dof_example/Yaw_Pitch_Roll_6dof_example.ino:31:19: error: 'class HMC5883L' has no member named 'SetScale'; did you mean 'setScale'?
error = compass.SetScale(1.3); // Set the scale of the compass.
^~~~~~~~
setScale
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Comp6DOF_n0m1/examples/Yaw_Pitch_Roll_6dof_example/Yaw_Pitch_Roll_6dof_example.ino:33:28: error: 'class HMC5883L' has no member named 'GetErrorText'; did you mean 'getErrorText'?
Serial.println(compass.GetErrorText(error));
^~~~~~~~~~~~
getErrorText
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Comp6DOF_n0m1/examples/Yaw_Pitch_Roll_6dof_example/Yaw_Pitch_Roll_6dof_example.ino:35:19: error: 'class HMC5883L' has no member named 'SetMeasurementMode'; did you mean 'setMeasurementMode'?
error = compass.SetMeasurementMode(Measurement_Continuous); // Set the measurement mode to Continuous
^~~~~~~~~~~~~~~~~~
setMeasurementMode
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Comp6DOF_n0m1/examples/Yaw_Pitch_Roll_6dof_example/Yaw_Pitch_Roll_6dof_example.ino:35:38: error: 'Measurement_Continuous' was not declared in this scope
error = compass.SetMeasurementMode(Measurement_Continuous); // Set the measurement mode to Continuous
^~~~~~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Comp6DOF_n0m1/examples/Yaw_Pitch_Roll_6dof_example/Yaw_Pitch_Roll_6dof_example.ino:37:28: error: 'class HMC5883L' has no member named 'GetErrorText'; did you mean 'getErrorText'?
Serial.println(compass.GetErrorText(error));
^~~~~~~~~~~~
getErrorText
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Comp6DOF_n0m1/examples/Yaw_Pitch_Roll_6dof_example/Yaw_Pitch_Roll_6dof_example.ino: In function 'void loop()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Comp6DOF_n0m1/examples/Yaw_Pitch_Roll_6dof_example/Yaw_Pitch_Roll_6dof_example.ino:65:33: error: 'class HMC5883L' has no member named 'ReadRawAxis'; did you mean 'readRawAxis'?
MagnetometerRaw raw = compass.ReadRawAxis();
^~~~~~~~~~~
readRawAxis
Result: PASS
WARNING: library Comp6DOF_n0m1 claims to run on avr architecture(s) and may be incompatible with your current board which runs on samd architecture(s). Sketch uses 12156 bytes (4%) of program storage space. Maximum is 262144 bytes. Global variables use 2996 bytes (9%) of dynamic memory, leaving 29772 bytes for local variables. Maximum is 32768 bytes.
Result: FAIL
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/Comp6DOF_n0m1/examples/Hard_Iron_Offset_6dof_example/Hard_Iron_Offset_6dof_example.ino:11:10: fatal error: I2C.h: No such file or directory
#include <I2C.h>
^~~~~~~
compilation terminated.
Result: FAIL
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/Comp6DOF_n0m1/examples/Tilt_comp_6dof_example/Tilt_comp_6dof_example.ino:11:10: fatal error: I2C.h: No such file or directory
#include <I2C.h>
^~~~~~~
compilation terminated.
Result: FAIL
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/Comp6DOF_n0m1/examples/Yaw_Pitch_Roll_6dof_example/Yaw_Pitch_Roll_6dof_example.ino:11:10: fatal error: I2C.h: No such file or directory
#include <I2C.h>
^~~~~~~
compilation terminated.
Result: PASS
WARNING: library Comp6DOF_n0m1 claims to run on avr architecture(s) and may be incompatible with your current board which runs on esp32 architecture(s). Sketch uses 197768 bytes (15%) of program storage space. Maximum is 1310720 bytes. Global variables use 13092 bytes (3%) of dynamic memory, leaving 314588 bytes for local variables. Maximum is 327680 bytes.
Result: FAIL
WARNING: library MMA8453_n0m1 claims to run on avr architecture(s) and may be incompatible with your current board which runs on esp32 architecture(s).
WARNING: library Comp6DOF_n0m1 claims to run on avr architecture(s) and may be incompatible with your current board which runs on esp32 architecture(s).
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Comp6DOF_n0m1/examples/Hard_Iron_Offset_6dof_example/Hard_Iron_Offset_6dof_example.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Comp6DOF_n0m1/examples/Hard_Iron_Offset_6dof_example/Hard_Iron_Offset_6dof_example.ino:31:19: error: 'class HMC5883L' has no member named 'SetScale'
error = compass.SetScale(1.3); // Set the scale of the compass.
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Comp6DOF_n0m1/examples/Hard_Iron_Offset_6dof_example/Hard_Iron_Offset_6dof_example.ino:33:28: error: 'class HMC5883L' has no member named 'GetErrorText'
Serial.println(compass.GetErrorText(error));
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Comp6DOF_n0m1/examples/Hard_Iron_Offset_6dof_example/Hard_Iron_Offset_6dof_example.ino:35:19: error: 'class HMC5883L' has no member named 'SetMeasurementMode'
error = compass.SetMeasurementMode(Measurement_Continuous); // Set the measurement mode to Continuous
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Comp6DOF_n0m1/examples/Hard_Iron_Offset_6dof_example/Hard_Iron_Offset_6dof_example.ino:35:38: error: 'Measurement_Continuous' was not declared in this scope
error = compass.SetMeasurementMode(Measurement_Continuous); // Set the measurement mode to Continuous
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Comp6DOF_n0m1/examples/Hard_Iron_Offset_6dof_example/Hard_Iron_Offset_6dof_example.ino:37:28: error: 'class HMC5883L' has no member named 'GetErrorText'
Serial.println(compass.GetErrorText(error));
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Comp6DOF_n0m1/examples/Hard_Iron_Offset_6dof_example/Hard_Iron_Offset_6dof_example.ino:50:38: error: 'class HMC5883L' has no member named 'ReadRawAxis'
MagnetometerRaw raw = compass.ReadRawAxis();
^
Result: FAIL
WARNING: library MMA8453_n0m1 claims to run on avr architecture(s) and may be incompatible with your current board which runs on esp32 architecture(s).
WARNING: library Comp6DOF_n0m1 claims to run on avr architecture(s) and may be incompatible with your current board which runs on esp32 architecture(s).
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Comp6DOF_n0m1/examples/Tilt_comp_6dof_example/Tilt_comp_6dof_example.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Comp6DOF_n0m1/examples/Tilt_comp_6dof_example/Tilt_comp_6dof_example.ino:31:19: error: 'class HMC5883L' has no member named 'SetScale'
error = compass.SetScale(1.3); // Set the scale of the compass.
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Comp6DOF_n0m1/examples/Tilt_comp_6dof_example/Tilt_comp_6dof_example.ino:33:28: error: 'class HMC5883L' has no member named 'GetErrorText'
Serial.println(compass.GetErrorText(error));
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Comp6DOF_n0m1/examples/Tilt_comp_6dof_example/Tilt_comp_6dof_example.ino:35:19: error: 'class HMC5883L' has no member named 'SetMeasurementMode'
error = compass.SetMeasurementMode(Measurement_Continuous); // Set the measurement mode to Continuous
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Comp6DOF_n0m1/examples/Tilt_comp_6dof_example/Tilt_comp_6dof_example.ino:35:38: error: 'Measurement_Continuous' was not declared in this scope
error = compass.SetMeasurementMode(Measurement_Continuous); // Set the measurement mode to Continuous
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Comp6DOF_n0m1/examples/Tilt_comp_6dof_example/Tilt_comp_6dof_example.ino:37:28: error: 'class HMC5883L' has no member named 'GetErrorText'
Serial.println(compass.GetErrorText(error));
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Comp6DOF_n0m1/examples/Tilt_comp_6dof_example/Tilt_comp_6dof_example.ino: In function 'void loop()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Comp6DOF_n0m1/examples/Tilt_comp_6dof_example/Tilt_comp_6dof_example.ino:48:33: error: 'class HMC5883L' has no member named 'ReadRawAxis'
MagnetometerRaw raw = compass.ReadRawAxis();
^
Result: FAIL
WARNING: library MMA8453_n0m1 claims to run on avr architecture(s) and may be incompatible with your current board which runs on esp32 architecture(s).
WARNING: library Comp6DOF_n0m1 claims to run on avr architecture(s) and may be incompatible with your current board which runs on esp32 architecture(s).
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Comp6DOF_n0m1/examples/Yaw_Pitch_Roll_6dof_example/Yaw_Pitch_Roll_6dof_example.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Comp6DOF_n0m1/examples/Yaw_Pitch_Roll_6dof_example/Yaw_Pitch_Roll_6dof_example.ino:31:19: error: 'class HMC5883L' has no member named 'SetScale'
error = compass.SetScale(1.3); // Set the scale of the compass.
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Comp6DOF_n0m1/examples/Yaw_Pitch_Roll_6dof_example/Yaw_Pitch_Roll_6dof_example.ino:33:28: error: 'class HMC5883L' has no member named 'GetErrorText'
Serial.println(compass.GetErrorText(error));
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Comp6DOF_n0m1/examples/Yaw_Pitch_Roll_6dof_example/Yaw_Pitch_Roll_6dof_example.ino:35:19: error: 'class HMC5883L' has no member named 'SetMeasurementMode'
error = compass.SetMeasurementMode(Measurement_Continuous); // Set the measurement mode to Continuous
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Comp6DOF_n0m1/examples/Yaw_Pitch_Roll_6dof_example/Yaw_Pitch_Roll_6dof_example.ino:35:38: error: 'Measurement_Continuous' was not declared in this scope
error = compass.SetMeasurementMode(Measurement_Continuous); // Set the measurement mode to Continuous
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Comp6DOF_n0m1/examples/Yaw_Pitch_Roll_6dof_example/Yaw_Pitch_Roll_6dof_example.ino:37:28: error: 'class HMC5883L' has no member named 'GetErrorText'
Serial.println(compass.GetErrorText(error));
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Comp6DOF_n0m1/examples/Yaw_Pitch_Roll_6dof_example/Yaw_Pitch_Roll_6dof_example.ino: In function 'void loop()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Comp6DOF_n0m1/examples/Yaw_Pitch_Roll_6dof_example/Yaw_Pitch_Roll_6dof_example.ino:65:33: error: 'class HMC5883L' has no member named 'ReadRawAxis'
MagnetometerRaw raw = compass.ReadRawAxis();
^