This report was generated on Wednesday, 23-Feb-22 22:48:15 CET using arduino-testlib.
Version: 1.4.2
More details
| Board | Claims compatibility | Inclusion | Autotest |
EthernetDcc |
MaxiDcc |
MiniDcc |
SerialDcc |
|---|---|---|---|---|---|---|---|
|
arduino:avr:uno
1.8.4 |
Yes | PASS | PASS | FAIL | PASS | PASS | PASS |
|
arduino:mbed_nano:nanorp2040connect
2.7.2 |
No | FAIL | FAIL | FAIL | FAIL | FAIL | FAIL |
|
arduino:megaavr:nona4809
1.8.7 |
No | FAIL | FAIL | FAIL | FAIL | FAIL | FAIL |
|
arduino:samd:mkrwifi1010
1.8.12 |
No | FAIL | FAIL | FAIL | FAIL | FAIL | FAIL |
|
esp32:esp32:d1_mini32
1.0.6 |
Yes | PASS | PASS | FAIL | PASS | PASS | PASS |
Result: PASS
Sketch uses 2940 bytes (9%) of program storage space. Maximum is 32256 bytes. Global variables use 238 bytes (11%) of dynamic memory, leaving 1810 bytes for local variables. Maximum is 2048 bytes.
Result: PASS
Sketch uses 18410 bytes (57%) of program storage space. Maximum is 32256 bytes. Global variables use 738 bytes (36%) of dynamic memory, leaving 1310 bytes for local variables. Maximum is 2048 bytes.
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DCCpp/examples/EthernetDcc/EthernetDcc.ino:10:2: error: #error To be able to compile this sample,the lines #define USE_TEXTCOMMAND and #define USE_ETHERNET must be uncommented in DCCpp.h #error To be able to compile this sample,the lines #define USE_TEXTCOMMAND and #define USE_ETHERNET must be uncommented in DCCpp.h ^~~~~ Multiple libraries were found for "EEPROM.h" Used: /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/avr/1.8.4/libraries/EEPROM Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Hello_Drum Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/arduino-NVM
Result: PASS
Sketch uses 22030 bytes (68%) of program storage space. Maximum is 32256 bytes. Global variables use 970 bytes (47%) of dynamic memory, leaving 1078 bytes for local variables. Maximum is 2048 bytes.
Result: PASS
Sketch uses 21344 bytes (66%) of program storage space. Maximum is 32256 bytes. Global variables use 866 bytes (42%) of dynamic memory, leaving 1182 bytes for local variables. Maximum is 2048 bytes.
Result: PASS
Sketch uses 17362 bytes (53%) of program storage space. Maximum is 32256 bytes. Global variables use 600 bytes (29%) of dynamic memory, leaving 1448 bytes for local variables. Maximum is 2048 bytes.
Result: FAIL
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DCCpp/src/EEStore.cpp:22:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Hello_Drum/src/EEPROM.h:25:10: fatal error: avr/eeprom.h: No such file or directory
#include <avr/eeprom.h>
^~~~~~~~~~~~~~
compilation terminated.
Multiple libraries were found for "EEPROM.h"
Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Hello_Drum
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/arduino-NVM
Result: FAIL
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DCCpp/src/EEStore.cpp:22:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Hello_Drum/src/EEPROM.h:25:10: fatal error: avr/eeprom.h: No such file or directory
#include <avr/eeprom.h>
^~~~~~~~~~~~~~
compilation terminated.
Multiple libraries were found for "EEPROM.h"
Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Hello_Drum
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/arduino-NVM
Result: FAIL
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DCCpp/src/EEStore.cpp:22:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Hello_Drum/src/EEPROM.h:25:10: fatal error: avr/eeprom.h: No such file or directory
#include <avr/eeprom.h>
^~~~~~~~~~~~~~
compilation terminated.
Multiple libraries were found for "EEPROM.h"
Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Hello_Drum
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/arduino-NVM
Result: FAIL
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DCCpp/src/EEStore.cpp:22:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Hello_Drum/src/EEPROM.h:25:10: fatal error: avr/eeprom.h: No such file or directory
#include <avr/eeprom.h>
^~~~~~~~~~~~~~
compilation terminated.
Multiple libraries were found for "EEPROM.h"
Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Hello_Drum
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/arduino-NVM
Result: FAIL
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DCCpp/src/EEStore.cpp:22:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Hello_Drum/src/EEPROM.h:25:10: fatal error: avr/eeprom.h: No such file or directory
#include <avr/eeprom.h>
^~~~~~~~~~~~~~
compilation terminated.
Multiple libraries were found for "EEPROM.h"
Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Hello_Drum
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/arduino-NVM
Result: FAIL
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DCCpp/src/EEStore.cpp:22:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Hello_Drum/src/EEPROM.h:25:10: fatal error: avr/eeprom.h: No such file or directory
#include <avr/eeprom.h>
^~~~~~~~~~~~~~
compilation terminated.
Multiple libraries were found for "EEPROM.h"
Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Hello_Drum
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/arduino-NVM
Result: FAIL
WARNING: library DCCpp claims to run on avr, esp32 architecture(s) and may be incompatible with your current board which runs on megaavr architecture(s). Multiple libraries were found for "EEPROM.h" Used: /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/EEPROM Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Hello_Drum Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/arduino-NVM
Result: FAIL
WARNING: library DCCpp claims to run on avr, esp32 architecture(s) and may be incompatible with your current board which runs on megaavr architecture(s).
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DCCpp/examples/Autotest/Autotest.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DCCpp/examples/Autotest/Autotest.ino:89:35: error: 'DCC_SIGNAL_PIN_MAIN' was not declared in this scope
DCCpp::beginMain(UNDEFINED_PIN, DCC_SIGNAL_PIN_MAIN, 11, A0);
^~~~~~~~~~~~~~~~~~~
Multiple libraries were found for "EEPROM.h"
Used: /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/EEPROM
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/arduino-NVM
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Hello_Drum
Result: FAIL
WARNING: library DCCpp claims to run on avr, esp32 architecture(s) and may be incompatible with your current board which runs on megaavr architecture(s). /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DCCpp/examples/EthernetDcc/EthernetDcc.ino:10:2: error: #error To be able to compile this sample,the lines #define USE_TEXTCOMMAND and #define USE_ETHERNET must be uncommented in DCCpp.h #error To be able to compile this sample,the lines #define USE_TEXTCOMMAND and #define USE_ETHERNET must be uncommented in DCCpp.h ^~~~~ Multiple libraries were found for "EEPROM.h" Used: /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/EEPROM Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Hello_Drum Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/arduino-NVM
Result: FAIL
WARNING: library Commanders claims to run on avr, esp32 architecture(s) and may be incompatible with your current board which runs on megaavr architecture(s).
WARNING: library DIO2 claims to run on avr, sam, esp32, STM32F1, rp2040 architecture(s) and may be incompatible with your current board which runs on megaavr architecture(s).
WARNING: library DCCpp claims to run on avr, esp32 architecture(s) and may be incompatible with your current board which runs on megaavr architecture(s).
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DCCpp/examples/MaxiDcc/MaxiDcc.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DCCpp/examples/MaxiDcc/MaxiDcc.ino:71:34: error: 'DCC_SIGNAL_PIN_MAIN' was not declared in this scope
DCCpp::beginMain(UNDEFINED_PIN, DCC_SIGNAL_PIN_MAIN, 11, A0);
^~~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DCCpp/examples/MaxiDcc/MaxiDcc.ino:72:34: error: 'DCC_SIGNAL_PIN_PROG' was not declared in this scope
DCCpp::beginProg(UNDEFINED_PIN, DCC_SIGNAL_PIN_PROG, 3, A1);
^~~~~~~~~~~~~~~~~~~
Multiple libraries were found for "EEPROM.h"
Used: /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/EEPROM
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/arduino-NVM
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Hello_Drum
Result: FAIL
WARNING: library Commanders claims to run on avr, esp32 architecture(s) and may be incompatible with your current board which runs on megaavr architecture(s).
WARNING: library DIO2 claims to run on avr, sam, esp32, STM32F1, rp2040 architecture(s) and may be incompatible with your current board which runs on megaavr architecture(s).
WARNING: library DCCpp claims to run on avr, esp32 architecture(s) and may be incompatible with your current board which runs on megaavr architecture(s).
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DCCpp/examples/MiniDcc/MiniDcc.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DCCpp/examples/MiniDcc/MiniDcc.ino:59:35: error: 'DCC_SIGNAL_PIN_MAIN' was not declared in this scope
DCCpp::beginMain(UNDEFINED_PIN, DCC_SIGNAL_PIN_MAIN, 11, A5);
^~~~~~~~~~~~~~~~~~~
Multiple libraries were found for "EEPROM.h"
Used: /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/EEPROM
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/arduino-NVM
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Hello_Drum
Result: FAIL
WARNING: library DCCpp claims to run on avr, esp32 architecture(s) and may be incompatible with your current board which runs on megaavr architecture(s).
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DCCpp/examples/SerialDcc/SerialDcc.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DCCpp/examples/SerialDcc/SerialDcc.ino:22:35: error: 'DCC_SIGNAL_PIN_MAIN' was not declared in this scope
DCCpp::beginMain(UNDEFINED_PIN, DCC_SIGNAL_PIN_MAIN, 11, A0);
^~~~~~~~~~~~~~~~~~~
Multiple libraries were found for "EEPROM.h"
Used: /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/EEPROM
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/arduino-NVM
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Hello_Drum
Result: FAIL
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DCCpp/src/EEStore.cpp:22:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Hello_Drum/src/EEPROM.h:25:10: fatal error: avr/eeprom.h: No such file or directory
#include <avr/eeprom.h>
^~~~~~~~~~~~~~
compilation terminated.
Multiple libraries were found for "EEPROM.h"
Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Hello_Drum
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/arduino-NVM
Result: FAIL
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DCCpp/src/EEStore.cpp:22:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Hello_Drum/src/EEPROM.h:25:10: fatal error: avr/eeprom.h: No such file or directory
#include <avr/eeprom.h>
^~~~~~~~~~~~~~
compilation terminated.
Multiple libraries were found for "EEPROM.h"
Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Hello_Drum
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/arduino-NVM
Result: FAIL
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DCCpp/src/EEStore.cpp:22:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Hello_Drum/src/EEPROM.h:25:10: fatal error: avr/eeprom.h: No such file or directory
#include <avr/eeprom.h>
^~~~~~~~~~~~~~
compilation terminated.
Multiple libraries were found for "EEPROM.h"
Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Hello_Drum
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/arduino-NVM
Result: FAIL
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DCCpp/src/EEStore.cpp:22:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Hello_Drum/src/EEPROM.h:25:10: fatal error: avr/eeprom.h: No such file or directory
#include <avr/eeprom.h>
^~~~~~~~~~~~~~
compilation terminated.
Multiple libraries were found for "EEPROM.h"
Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Hello_Drum
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/arduino-NVM
Result: FAIL
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DCCpp/src/EEStore.cpp:22:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Hello_Drum/src/EEPROM.h:25:10: fatal error: avr/eeprom.h: No such file or directory
#include <avr/eeprom.h>
^~~~~~~~~~~~~~
compilation terminated.
Multiple libraries were found for "EEPROM.h"
Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Hello_Drum
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/arduino-NVM
Result: FAIL
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DCCpp/src/EEStore.cpp:22:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Hello_Drum/src/EEPROM.h:25:10: fatal error: avr/eeprom.h: No such file or directory
#include <avr/eeprom.h>
^~~~~~~~~~~~~~
compilation terminated.
Multiple libraries were found for "EEPROM.h"
Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Hello_Drum
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/arduino-NVM
Result: PASS
Sketch uses 206998 bytes (15%) of program storage space. Maximum is 1310720 bytes. Global variables use 13384 bytes (4%) of dynamic memory, leaving 314296 bytes for local variables. Maximum is 327680 bytes.
Result: PASS
Sketch uses 257526 bytes (19%) of program storage space. Maximum is 1310720 bytes. Global variables use 13888 bytes (4%) of dynamic memory, leaving 313792 bytes for local variables. Maximum is 327680 bytes.
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DCCpp/examples/EthernetDcc/EthernetDcc.ino:10:2: error: #error To be able to compile this sample,the lines #define USE_TEXTCOMMAND and #define USE_ETHERNET must be uncommented in DCCpp.h #error To be able to compile this sample,the lines #define USE_TEXTCOMMAND and #define USE_ETHERNET must be uncommented in DCCpp.h ^ Multiple libraries were found for "EEPROM.h" Used: /home/ec2-user/arduino-testlib/cli-datadir/data/packages/esp32/hardware/esp32/1.0.6/libraries/EEPROM Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/arduino-NVM Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Hello_Drum
Result: PASS
Sketch uses 262538 bytes (20%) of program storage space. Maximum is 1310720 bytes. Global variables use 14536 bytes (4%) of dynamic memory, leaving 313144 bytes for local variables. Maximum is 327680 bytes.
Result: PASS
Sketch uses 262102 bytes (19%) of program storage space. Maximum is 1310720 bytes. Global variables use 14360 bytes (4%) of dynamic memory, leaving 313320 bytes for local variables. Maximum is 327680 bytes.
Result: PASS
Sketch uses 256862 bytes (19%) of program storage space. Maximum is 1310720 bytes. Global variables use 13880 bytes (4%) of dynamic memory, leaving 313800 bytes for local variables. Maximum is 327680 bytes.