DFL168A_Sync - compatibility matrix

This report was generated on Wednesday, 23-Feb-22 22:48:15 CET using arduino-testlib.

DFL168A_Sync

Version: 1.0.3
More details

Compatibility matrix

Board	Claims compatibility	Inclusion	J1939	etc	GPS	ISO15765	J1708
arduino:avr:uno 1.8.4	Yes	PASS	FAIL	FAIL	FAIL	FAIL	FAIL
arduino:mbed_nano:nanorp2040connect 2.7.2	Yes ⚠️	FAIL	FAIL	FAIL	FAIL	FAIL	FAIL
arduino:megaavr:nona4809 1.8.7	Yes	PASS	PASS	PASS	PASS	PASS	PASS
arduino:samd:mkrwifi1010 1.8.12	Yes ⚠️	FAIL	FAIL	FAIL	FAIL	FAIL	FAIL
esp32:esp32:d1_mini32 1.0.6	Yes ⚠️	FAIL	FAIL	FAIL	FAIL	FAIL	FAIL

Compilation logs

arduino:avr:uno @ 1.8.4

Inclusion

Result: PASS
This library has no main header file so an empty one was created.

Sketch uses 1332 bytes (4%) of program storage space. Maximum is 32256 bytes.
Global variables use 184 bytes (8%) of dynamic memory, leaving 1864 bytes for local variables. Maximum is 2048 bytes.

examples/GPS

Result: FAIL

/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/DFL168A_Sync/examples/GPS/GPS.ino:2:20: error: 'Serial1' was not declared in this scope
 DFL168A myDFL168A(&Serial1, J1939_PROTOCOL, 1000,250000, 9600,500);  //GPS baudrate is 9600, GPS time out is 500ms
                    ^~~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/DFL168A_Sync/examples/GPS/GPS.ino:2:20: note: suggested alternative: 'Serial'
 DFL168A myDFL168A(&Serial1, J1939_PROTOCOL, 1000,250000, 9600,500);  //GPS baudrate is 9600, GPS time out is 500ms
                    ^~~~~~~
                    Serial

examples/ISO15765

Result: FAIL

/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/DFL168A_Sync/examples/ISO15765/ISO15765.ino:2:20: error: 'Serial1' was not declared in this scope
 DFL168A myDFL168A(&Serial1, AUTO_PROTOCOL, 1000,250000, 9600,500); 
                    ^~~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/DFL168A_Sync/examples/ISO15765/ISO15765.ino:2:20: note: suggested alternative: 'Serial'
 DFL168A myDFL168A(&Serial1, AUTO_PROTOCOL, 1000,250000, 9600,500); 
                    ^~~~~~~
                    Serial

examples/J1708

Result: FAIL

/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/DFL168A_Sync/examples/J1708/J1708.ino:2:20: error: 'Serial1' was not declared in this scope
 DFL168A myDFL168A(&Serial1, J1708_PROTOCOL, 10000,500000, 9600,500); 
                    ^~~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/DFL168A_Sync/examples/J1708/J1708.ino:2:20: note: suggested alternative: 'Serial'
 DFL168A myDFL168A(&Serial1, J1708_PROTOCOL, 10000,500000, 9600,500); 
                    ^~~~~~~
                    Serial

examples/J1939

Result: FAIL

/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/DFL168A_Sync/examples/J1939/J1939.ino:2:20: error: 'Serial1' was not declared in this scope
 DFL168A myDFL168A(&Serial1, J1939_PROTOCOL, 1000,250000, 9600,500); 
                    ^~~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/DFL168A_Sync/examples/J1939/J1939.ino:2:20: note: suggested alternative: 'Serial'
 DFL168A myDFL168A(&Serial1, J1939_PROTOCOL, 1000,250000, 9600,500); 
                    ^~~~~~~
                    Serial

examples/etc

Result: FAIL

/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/DFL168A_Sync/examples/etc/etc.ino:2:20: error: 'Serial1' was not declared in this scope
 DFL168A myDFL168A(&Serial1, J1939_PROTOCOL, 1000,250000, 9600,500);  //GPS baudrate is 9600, GPS time out is 500ms
                    ^~~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/DFL168A_Sync/examples/etc/etc.ino:2:20: note: suggested alternative: 'Serial'
 DFL168A myDFL168A(&Serial1, J1939_PROTOCOL, 1000,250000, 9600,500);  //GPS baudrate is 9600, GPS time out is 500ms
                    ^~~~~~~
                    Serial

arduino:mbed_nano:nanorp2040connect @ 2.7.2

Inclusion

Result: FAIL

examples/GPS

Result: FAIL

examples/ISO15765

Result: FAIL

examples/J1708

Result: FAIL

examples/J1939

Result: FAIL

examples/etc

Result: FAIL

arduino:megaavr:nona4809 @ 1.8.7

Inclusion

Result: PASS

Sketch uses 2614 bytes (5%) of program storage space. Maximum is 49152 bytes.
Global variables use 177 bytes (2%) of dynamic memory, leaving 5967 bytes for local variables. Maximum is 6144 bytes.

examples/GPS

Result: PASS

Sketch uses 15637 bytes (31%) of program storage space. Maximum is 49152 bytes.
Global variables use 560 bytes (9%) of dynamic memory, leaving 5584 bytes for local variables. Maximum is 6144 bytes.

examples/ISO15765

Result: PASS

Sketch uses 11901 bytes (24%) of program storage space. Maximum is 49152 bytes.
Global variables use 560 bytes (9%) of dynamic memory, leaving 5584 bytes for local variables. Maximum is 6144 bytes.

examples/J1708

Result: PASS

Sketch uses 14396 bytes (29%) of program storage space. Maximum is 49152 bytes.
Global variables use 560 bytes (9%) of dynamic memory, leaving 5584 bytes for local variables. Maximum is 6144 bytes.

examples/J1939

Result: PASS

Sketch uses 13225 bytes (26%) of program storage space. Maximum is 49152 bytes.
Global variables use 560 bytes (9%) of dynamic memory, leaving 5584 bytes for local variables. Maximum is 6144 bytes.

examples/etc

Result: PASS

Sketch uses 13965 bytes (28%) of program storage space. Maximum is 49152 bytes.
Global variables use 560 bytes (9%) of dynamic memory, leaving 5584 bytes for local variables. Maximum is 6144 bytes.

arduino:samd:mkrwifi1010 @ 1.8.12

Inclusion

Result: FAIL
This library has no main header file so an empty one was created.

examples/GPS

Result: FAIL

examples/ISO15765

Result: FAIL

examples/J1708

Result: FAIL

examples/J1939

Result: FAIL

examples/etc

Result: FAIL

esp32:esp32:d1_mini32 @ 1.0.6

Inclusion

Result: FAIL

examples/GPS

Result: FAIL

examples/ISO15765

Result: FAIL

examples/J1708

Result: FAIL

examples/J1939

Result: FAIL

examples/etc

Result: FAIL