DFRobot_VL6180X - compatibility matrix

This report was generated on Wednesday, 23-Feb-22 22:48:15 CET using arduino-testlib.

DFRobot_VL6180X

Version: 1.0.1
More details

Compatibility matrix

Board	Claims compatibility	Inclusion	alsContinuousInterruptMode	interleaveMode	pollMeasurement	rangeContinuousInterruptMode	restart
arduino:avr:uno 1.8.4	Yes	PASS	PASS	PASS	PASS	PASS	FAIL
arduino:mbed_nano:nanorp2040connect 2.7.2	Yes	PASS	PASS	PASS	PASS	PASS	FAIL
arduino:megaavr:nona4809 1.8.7	Yes	PASS	PASS	PASS	PASS	PASS	FAIL
arduino:samd:mkrwifi1010 1.8.12	Yes	PASS	PASS	PASS	PASS	PASS	FAIL
esp32:esp32:d1_mini32 1.0.6	Yes	PASS	FAIL	FAIL	PASS	FAIL	FAIL

Compilation logs

arduino:avr:uno @ 1.8.4

Inclusion

Result: PASS

Sketch uses 1636 bytes (5%) of program storage space. Maximum is 32256 bytes.
Global variables use 122 bytes (5%) of dynamic memory, leaving 1926 bytes for local variables. Maximum is 2048 bytes.

examples/alsContinuousInterruptMode

Result: PASS

Sketch uses 9470 bytes (29%) of program storage space. Maximum is 32256 bytes.
Global variables use 501 bytes (24%) of dynamic memory, leaving 1547 bytes for local variables. Maximum is 2048 bytes.

examples/interleaveMode

Result: PASS

Sketch uses 10088 bytes (31%) of program storage space. Maximum is 32256 bytes.
Global variables use 857 bytes (41%) of dynamic memory, leaving 1191 bytes for local variables. Maximum is 2048 bytes.

examples/pollMeasurement

Result: PASS

Sketch uses 9666 bytes (29%) of program storage space. Maximum is 32256 bytes.
Global variables use 852 bytes (41%) of dynamic memory, leaving 1196 bytes for local variables. Maximum is 2048 bytes.

examples/rangeContinuousInterruptMode

Result: PASS

Sketch uses 7434 bytes (23%) of program storage space. Maximum is 32256 bytes.
Global variables use 847 bytes (41%) of dynamic memory, leaving 1201 bytes for local variables. Maximum is 2048 bytes.

examples/restart

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DFRobot_VL6180X/examples/restart/restart.ino:12:14: error: expected initializer before numeric constant
  uint8_t Pin 12   //The GPIO port we set is connected to the CE pin in the sensor
              ^~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DFRobot_VL6180X/examples/restart/restart.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DFRobot_VL6180X/examples/restart/restart.ino:14:10: error: 'pin' was not declared in this scope
  pinMode(pin,OUTPUT);
          ^~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DFRobot_VL6180X/examples/restart/restart.ino:14:10: note: suggested alternative: 'sin'
  pinMode(pin,OUTPUT);
          ^~~
          sin
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DFRobot_VL6180X/examples/restart/restart.ino:15:15: error: 'Pin' was not declared in this scope
  digitalWrite(Pin,LOW);
               ^~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DFRobot_VL6180X/examples/restart/restart.ino:15:15: note: suggested alternative: 'sin'
  digitalWrite(Pin,LOW);
               ^~~
               sin

arduino:mbed_nano:nanorp2040connect @ 2.7.2

Inclusion

Result: PASS

Sketch uses 81706 bytes (0%) of program storage space. Maximum is 16777216 bytes.
Global variables use 44220 bytes (16%) of dynamic memory, leaving 226116 bytes for local variables. Maximum is 270336 bytes.

examples/alsContinuousInterruptMode

Result: PASS

Sketch uses 88010 bytes (0%) of program storage space. Maximum is 16777216 bytes.
Global variables use 44496 bytes (16%) of dynamic memory, leaving 225840 bytes for local variables. Maximum is 270336 bytes.

examples/interleaveMode

Result: PASS

Sketch uses 86770 bytes (0%) of program storage space. Maximum is 16777216 bytes.
Global variables use 44496 bytes (16%) of dynamic memory, leaving 225840 bytes for local variables. Maximum is 270336 bytes.

examples/pollMeasurement

Result: PASS

Sketch uses 85182 bytes (0%) of program storage space. Maximum is 16777216 bytes.
Global variables use 44244 bytes (16%) of dynamic memory, leaving 226092 bytes for local variables. Maximum is 270336 bytes.

examples/rangeContinuousInterruptMode

Result: PASS

Sketch uses 85032 bytes (0%) of program storage space. Maximum is 16777216 bytes.
Global variables use 44496 bytes (16%) of dynamic memory, leaving 225840 bytes for local variables. Maximum is 270336 bytes.

examples/restart

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DFRobot_VL6180X/examples/restart/restart.ino:12:14: error: expected initializer before numeric constant
  uint8_t Pin 12   //The GPIO port we set is connected to the CE pin in the sensor
              ^~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DFRobot_VL6180X/examples/restart/restart.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DFRobot_VL6180X/examples/restart/restart.ino:14:10: error: 'pin' was not declared in this scope
  pinMode(pin,OUTPUT);
          ^~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DFRobot_VL6180X/examples/restart/restart.ino:14:10: note: suggested alternative: 'min'
  pinMode(pin,OUTPUT);
          ^~~
          min
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DFRobot_VL6180X/examples/restart/restart.ino:15:15: error: 'Pin' was not declared in this scope
  digitalWrite(Pin,LOW);
               ^~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DFRobot_VL6180X/examples/restart/restart.ino:15:15: note: suggested alternative: 'min'
  digitalWrite(Pin,LOW);
               ^~~
               min

arduino:megaavr:nona4809 @ 1.8.7

Inclusion

Result: PASS

Sketch uses 3104 bytes (6%) of program storage space. Maximum is 49152 bytes.
Global variables use 317 bytes (5%) of dynamic memory, leaving 5827 bytes for local variables. Maximum is 6144 bytes.
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DFRobot_VL6180X/DFRobot_VL6180X.h:19:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DFRobot_VL6180X/DFRobot_VL6180X.cpp:12:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h: In member function 'uint16_t DFRobot_VL6180X::read(uint16_t, uint8_t)':
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:63:12: note: candidate 1: size_t TwoWire::requestFrom(int, int)
     size_t requestFrom(int, int);
            ^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:61:12: note: candidate 2: virtual size_t TwoWire::requestFrom(uint8_t, size_t)
     size_t requestFrom(uint8_t, size_t);
            ^~~~~~~~~~~

examples/alsContinuousInterruptMode

Result: PASS

Sketch uses 10872 bytes (22%) of program storage space. Maximum is 49152 bytes.
Global variables use 703 bytes (11%) of dynamic memory, leaving 5441 bytes for local variables. Maximum is 6144 bytes.
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DFRobot_VL6180X/DFRobot_VL6180X.h:19:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DFRobot_VL6180X/DFRobot_VL6180X.cpp:12:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h: In member function 'uint16_t DFRobot_VL6180X::read(uint16_t, uint8_t)':
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:63:12: note: candidate 1: size_t TwoWire::requestFrom(int, int)
     size_t requestFrom(int, int);
            ^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:61:12: note: candidate 2: virtual size_t TwoWire::requestFrom(uint8_t, size_t)
     size_t requestFrom(uint8_t, size_t);
            ^~~~~~~~~~~

examples/interleaveMode

Result: PASS

Sketch uses 11478 bytes (23%) of program storage space. Maximum is 49152 bytes.
Global variables use 703 bytes (11%) of dynamic memory, leaving 5441 bytes for local variables. Maximum is 6144 bytes.
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DFRobot_VL6180X/DFRobot_VL6180X.h:19:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DFRobot_VL6180X/DFRobot_VL6180X.cpp:12:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h: In member function 'uint16_t DFRobot_VL6180X::read(uint16_t, uint8_t)':
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:63:12: note: candidate 1: size_t TwoWire::requestFrom(int, int)
     size_t requestFrom(int, int);
            ^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:61:12: note: candidate 2: virtual size_t TwoWire::requestFrom(uint8_t, size_t)
     size_t requestFrom(uint8_t, size_t);
            ^~~~~~~~~~~

examples/pollMeasurement

Result: PASS

Sketch uses 10654 bytes (21%) of program storage space. Maximum is 49152 bytes.
Global variables use 510 bytes (8%) of dynamic memory, leaving 5634 bytes for local variables. Maximum is 6144 bytes.
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DFRobot_VL6180X/DFRobot_VL6180X.h:19:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DFRobot_VL6180X/DFRobot_VL6180X.cpp:12:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h: In member function 'uint16_t DFRobot_VL6180X::read(uint16_t, uint8_t)':
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:63:12: note: candidate 1: size_t TwoWire::requestFrom(int, int)
     size_t requestFrom(int, int);
            ^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:61:12: note: candidate 2: virtual size_t TwoWire::requestFrom(uint8_t, size_t)
     size_t requestFrom(uint8_t, size_t);
            ^~~~~~~~~~~

examples/rangeContinuousInterruptMode

Result: PASS

Sketch uses 8821 bytes (17%) of program storage space. Maximum is 49152 bytes.
Global variables use 703 bytes (11%) of dynamic memory, leaving 5441 bytes for local variables. Maximum is 6144 bytes.
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DFRobot_VL6180X/DFRobot_VL6180X.h:19:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DFRobot_VL6180X/DFRobot_VL6180X.cpp:12:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h: In member function 'uint16_t DFRobot_VL6180X::read(uint16_t, uint8_t)':
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:63:12: note: candidate 1: size_t TwoWire::requestFrom(int, int)
     size_t requestFrom(int, int);
            ^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:61:12: note: candidate 2: virtual size_t TwoWire::requestFrom(uint8_t, size_t)
     size_t requestFrom(uint8_t, size_t);
            ^~~~~~~~~~~

examples/restart

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DFRobot_VL6180X/examples/restart/restart.ino:12:14: error: expected initializer before numeric constant
  uint8_t Pin 12   //The GPIO port we set is connected to the CE pin in the sensor
              ^~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DFRobot_VL6180X/examples/restart/restart.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DFRobot_VL6180X/examples/restart/restart.ino:14:10: error: 'pin' was not declared in this scope
  pinMode(pin,OUTPUT);
          ^~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DFRobot_VL6180X/examples/restart/restart.ino:14:10: note: suggested alternative: 'min'
  pinMode(pin,OUTPUT);
          ^~~
          min
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DFRobot_VL6180X/examples/restart/restart.ino:15:15: error: 'Pin' was not declared in this scope
  digitalWrite(Pin,LOW);
               ^~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DFRobot_VL6180X/examples/restart/restart.ino:15:15: note: suggested alternative: 'min'
  digitalWrite(Pin,LOW);
               ^~~
               min

arduino:samd:mkrwifi1010 @ 1.8.12

Inclusion

Result: PASS

Sketch uses 13588 bytes (5%) of program storage space. Maximum is 262144 bytes.
Global variables use 3568 bytes (10%) of dynamic memory, leaving 29200 bytes for local variables. Maximum is 32768 bytes.

examples/alsContinuousInterruptMode

Result: PASS

Sketch uses 35980 bytes (13%) of program storage space. Maximum is 262144 bytes.
Global variables use 4104 bytes (12%) of dynamic memory, leaving 28664 bytes for local variables. Maximum is 32768 bytes.

examples/interleaveMode

Result: PASS

Sketch uses 35108 bytes (13%) of program storage space. Maximum is 262144 bytes.
Global variables use 4104 bytes (12%) of dynamic memory, leaving 28664 bytes for local variables. Maximum is 32768 bytes.

examples/pollMeasurement

Result: PASS

Sketch uses 34340 bytes (13%) of program storage space. Maximum is 262144 bytes.
Global variables use 3956 bytes (12%) of dynamic memory, leaving 28812 bytes for local variables. Maximum is 32768 bytes.

examples/rangeContinuousInterruptMode

Result: PASS

Sketch uses 16696 bytes (6%) of program storage space. Maximum is 262144 bytes.
Global variables use 3752 bytes (11%) of dynamic memory, leaving 29016 bytes for local variables. Maximum is 32768 bytes.

examples/restart

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DFRobot_VL6180X/examples/restart/restart.ino:12:14: error: expected initializer before numeric constant
  uint8_t Pin 12   //The GPIO port we set is connected to the CE pin in the sensor
              ^~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DFRobot_VL6180X/examples/restart/restart.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DFRobot_VL6180X/examples/restart/restart.ino:14:10: error: 'pin' was not declared in this scope
  pinMode(pin,OUTPUT);
          ^~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DFRobot_VL6180X/examples/restart/restart.ino:14:10: note: suggested alternative: 'min'
  pinMode(pin,OUTPUT);
          ^~~
          min
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DFRobot_VL6180X/examples/restart/restart.ino:15:15: error: 'Pin' was not declared in this scope
  digitalWrite(Pin,LOW);
               ^~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DFRobot_VL6180X/examples/restart/restart.ino:15:15: note: suggested alternative: 'min'
  digitalWrite(Pin,LOW);
               ^~~
               min

esp32:esp32:d1_mini32 @ 1.0.6

Inclusion

Result: PASS

Sketch uses 203138 bytes (15%) of program storage space. Maximum is 1310720 bytes.
Global variables use 13880 bytes (4%) of dynamic memory, leaving 313800 bytes for local variables. Maximum is 327680 bytes.

examples/alsContinuousInterruptMode

Result: FAIL

In file included from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/esp32/hardware/esp32/1.0.6/variants/d1_mini32/pins_arduino.h:5:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/esp32/hardware/esp32/1.0.6/cores/esp32/Arduino.h:185,
                 from /tmp/arduino-sketch-E9908051A4C5D2EF0F2D91070E615741/sketch/alsContinuousInterruptMode.ino.cpp:1:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DFRobot_VL6180X/examples/alsContinuousInterruptMode/alsContinuousInterruptMode.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DFRobot_VL6180X/examples/alsContinuousInterruptMode/alsContinuousInterruptMode.ino:76:41: error: 'D9' was not declared in this scope
   attachInterrupt(digitalPinToInterrupt(D9)/*Query the interrupt number of the D9 pin*/,interrupt,RISING);
                                         ^
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/esp32/hardware/esp32/1.0.6/variants/d1_mini32/../d32/d32_core.h:9:40: note: in definition of macro 'digitalPinToInterrupt'
 #define digitalPinToInterrupt(p)    (((p)<40)?(p):-1)
                                        ^

examples/interleaveMode

Result: FAIL

In file included from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/esp32/hardware/esp32/1.0.6/variants/d1_mini32/pins_arduino.h:5:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/esp32/hardware/esp32/1.0.6/cores/esp32/Arduino.h:185,
                 from /tmp/arduino-sketch-2CDCC8530A1AF828F8C05FC90B3CD838/sketch/interleaveMode.ino.cpp:1:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DFRobot_VL6180X/examples/interleaveMode/interleaveMode.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DFRobot_VL6180X/examples/interleaveMode/interleaveMode.ino:66:41: error: 'D9' was not declared in this scope
   attachInterrupt(digitalPinToInterrupt(D9)/*Query the interrupt number of the D9 pin*/,interrupt,FALLING);
                                         ^
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/esp32/hardware/esp32/1.0.6/variants/d1_mini32/../d32/d32_core.h:9:40: note: in definition of macro 'digitalPinToInterrupt'
 #define digitalPinToInterrupt(p)    (((p)<40)?(p):-1)
                                        ^

examples/pollMeasurement

Result: PASS

Sketch uses 216614 bytes (16%) of program storage space. Maximum is 1310720 bytes.
Global variables use 14152 bytes (4%) of dynamic memory, leaving 313528 bytes for local variables. Maximum is 327680 bytes.

examples/rangeContinuousInterruptMode

Result: FAIL

In file included from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/esp32/hardware/esp32/1.0.6/variants/d1_mini32/pins_arduino.h:5:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/esp32/hardware/esp32/1.0.6/cores/esp32/Arduino.h:185,
                 from /tmp/arduino-sketch-33244CB82AD8CA07636D4E4A83EF9305/sketch/rangeContinuousInterruptMode.ino.cpp:1:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DFRobot_VL6180X/examples/rangeContinuousInterruptMode/rangeContinuousInterruptMode.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DFRobot_VL6180X/examples/rangeContinuousInterruptMode/rangeContinuousInterruptMode.ino:63:41: error: 'D9' was not declared in this scope
   attachInterrupt(digitalPinToInterrupt(D9)/*Query the interrupt number of the D9 pin*/,interrupt,FALLING);
                                         ^
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/esp32/hardware/esp32/1.0.6/variants/d1_mini32/../d32/d32_core.h:9:40: note: in definition of macro 'digitalPinToInterrupt'
 #define digitalPinToInterrupt(p)    (((p)<40)?(p):-1)
                                        ^

examples/restart

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DFRobot_VL6180X/examples/restart/restart.ino:12:14: error: expected initializer before numeric constant
  uint8_t Pin 12   //The GPIO port we set is connected to the CE pin in the sensor 
              ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DFRobot_VL6180X/examples/restart/restart.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DFRobot_VL6180X/examples/restart/restart.ino:14:10: error: 'pin' was not declared in this scope
  pinMode(pin,OUTPUT);
          ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DFRobot_VL6180X/examples/restart/restart.ino:15:15: error: 'Pin' was not declared in this scope
  digitalWrite(Pin,LOW);
               ^