This report was generated on Wednesday, 23-Feb-22 22:48:15 CET using arduino-testlib.
Version: 0.1.35
More details
| Board | Claims compatibility | Inclusion | dht12_test |
dht22_test_noIRQ |
dht33_test |
dht11_test |
dht22_in_function |
dht22_test |
dht44_test |
dht_test1 |
dht_tuning |
dht21_test |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
arduino:avr:uno
1.8.4 |
Yes | PASS | PASS | PASS | PASS | PASS | PASS | PASS | PASS | PASS | PASS | PASS |
|
arduino:mbed_nano:nanorp2040connect
2.7.2 |
No | FAIL | FAIL | FAIL | FAIL | FAIL | FAIL | FAIL | FAIL | FAIL | FAIL | FAIL |
|
arduino:megaavr:nona4809
1.8.7 |
No ⚠️ | PASS | PASS | PASS | PASS | PASS | PASS | PASS | PASS | PASS | PASS | PASS |
|
arduino:samd:mkrwifi1010
1.8.12 |
No | FAIL | FAIL | FAIL | FAIL | FAIL | FAIL | FAIL | FAIL | FAIL | FAIL | FAIL |
|
esp32:esp32:d1_mini32
1.0.6 |
No ⚠️ | PASS | FAIL | FAIL | FAIL | FAIL | FAIL | FAIL | FAIL | FAIL | FAIL | FAIL |
Result: PASS
This library has no main header file so an empty one was created.
Sketch uses 444 bytes (1%) of program storage space. Maximum is 32256 bytes. Global variables use 9 bytes (0%) of dynamic memory, leaving 2039 bytes for local variables. Maximum is 2048 bytes.
Result: PASS
Sketch uses 4590 bytes (14%) of program storage space. Maximum is 32256 bytes. Global variables use 390 bytes (19%) of dynamic memory, leaving 1658 bytes for local variables. Maximum is 2048 bytes.
Result: PASS
Sketch uses 4676 bytes (14%) of program storage space. Maximum is 32256 bytes. Global variables use 358 bytes (17%) of dynamic memory, leaving 1690 bytes for local variables. Maximum is 2048 bytes.
Result: PASS
Sketch uses 4628 bytes (14%) of program storage space. Maximum is 32256 bytes. Global variables use 390 bytes (19%) of dynamic memory, leaving 1658 bytes for local variables. Maximum is 2048 bytes.
Result: PASS
Sketch uses 4318 bytes (13%) of program storage space. Maximum is 32256 bytes. Global variables use 244 bytes (11%) of dynamic memory, leaving 1804 bytes for local variables. Maximum is 2048 bytes.
Result: PASS
Sketch uses 5284 bytes (16%) of program storage space. Maximum is 32256 bytes. Global variables use 464 bytes (22%) of dynamic memory, leaving 1584 bytes for local variables. Maximum is 2048 bytes.
Result: PASS
Sketch uses 5604 bytes (17%) of program storage space. Maximum is 32256 bytes. Global variables use 482 bytes (23%) of dynamic memory, leaving 1566 bytes for local variables. Maximum is 2048 bytes.
Result: PASS
Sketch uses 4682 bytes (14%) of program storage space. Maximum is 32256 bytes. Global variables use 400 bytes (19%) of dynamic memory, leaving 1648 bytes for local variables. Maximum is 2048 bytes.
Result: PASS
Sketch uses 4682 bytes (14%) of program storage space. Maximum is 32256 bytes. Global variables use 400 bytes (19%) of dynamic memory, leaving 1648 bytes for local variables. Maximum is 2048 bytes.
Result: PASS
Sketch uses 5338 bytes (16%) of program storage space. Maximum is 32256 bytes. Global variables use 424 bytes (20%) of dynamic memory, leaving 1624 bytes for local variables. Maximum is 2048 bytes.
Result: PASS
Sketch uses 4988 bytes (15%) of program storage space. Maximum is 32256 bytes. Global variables use 426 bytes (20%) of dynamic memory, leaving 1622 bytes for local variables. Maximum is 2048 bytes.
Result: FAIL
This library has no main header file so an empty one was created.
WARNING: library DHTlib claims to run on avr architecture(s) and may be incompatible with your current board which runs on mbed_nano architecture(s).
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DHTlib/dht.cpp: In member function 'int8_t dht::_readSensor(uint8_t, uint8_t, uint8_t)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DHTlib/dht.cpp:215:19: error: 'digitalPinToBitMask' was not declared in this scope
uint8_t bit = digitalPinToBitMask(pin);
^~~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DHTlib/dht.cpp:215:19: note: suggested alternative: 'digitalPinToPinName'
uint8_t bit = digitalPinToBitMask(pin);
^~~~~~~~~~~~~~~~~~~
digitalPinToPinName
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DHTlib/dht.cpp:217:29: error: 'portInputRegister' was not declared in this scope
volatile uint8_t *PIR = portInputRegister(port);
^~~~~~~~~~~~~~~~~
Multiple libraries were found for "dht.h"
Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DHTlib
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/UncleRus
Result: FAIL
WARNING: library DHTlib claims to run on avr architecture(s) and may be incompatible with your current board which runs on mbed_nano architecture(s).
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DHTlib/dht.cpp: In member function 'int8_t dht::_readSensor(uint8_t, uint8_t, uint8_t)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DHTlib/dht.cpp:215:19: error: 'digitalPinToBitMask' was not declared in this scope
uint8_t bit = digitalPinToBitMask(pin);
^~~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DHTlib/dht.cpp:215:19: note: suggested alternative: 'digitalPinToPinName'
uint8_t bit = digitalPinToBitMask(pin);
^~~~~~~~~~~~~~~~~~~
digitalPinToPinName
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DHTlib/dht.cpp:217:29: error: 'portInputRegister' was not declared in this scope
volatile uint8_t *PIR = portInputRegister(port);
^~~~~~~~~~~~~~~~~
Multiple libraries were found for "dht.h"
Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DHTlib
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/UncleRus
Result: FAIL
WARNING: library DHTlib claims to run on avr architecture(s) and may be incompatible with your current board which runs on mbed_nano architecture(s).
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DHTlib/dht.cpp: In member function 'int8_t dht::_readSensor(uint8_t, uint8_t, uint8_t)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DHTlib/dht.cpp:215:19: error: 'digitalPinToBitMask' was not declared in this scope
uint8_t bit = digitalPinToBitMask(pin);
^~~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DHTlib/dht.cpp:215:19: note: suggested alternative: 'digitalPinToPinName'
uint8_t bit = digitalPinToBitMask(pin);
^~~~~~~~~~~~~~~~~~~
digitalPinToPinName
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DHTlib/dht.cpp:217:29: error: 'portInputRegister' was not declared in this scope
volatile uint8_t *PIR = portInputRegister(port);
^~~~~~~~~~~~~~~~~
Multiple libraries were found for "dht.h"
Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DHTlib
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/UncleRus
Result: FAIL
WARNING: library DHTlib claims to run on avr architecture(s) and may be incompatible with your current board which runs on mbed_nano architecture(s).
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DHTlib/dht.cpp: In member function 'int8_t dht::_readSensor(uint8_t, uint8_t, uint8_t)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DHTlib/dht.cpp:215:19: error: 'digitalPinToBitMask' was not declared in this scope
uint8_t bit = digitalPinToBitMask(pin);
^~~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DHTlib/dht.cpp:215:19: note: suggested alternative: 'digitalPinToPinName'
uint8_t bit = digitalPinToBitMask(pin);
^~~~~~~~~~~~~~~~~~~
digitalPinToPinName
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DHTlib/dht.cpp:217:29: error: 'portInputRegister' was not declared in this scope
volatile uint8_t *PIR = portInputRegister(port);
^~~~~~~~~~~~~~~~~
Multiple libraries were found for "dht.h"
Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DHTlib
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/UncleRus
Result: FAIL
WARNING: library DHTlib claims to run on avr architecture(s) and may be incompatible with your current board which runs on mbed_nano architecture(s).
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DHTlib/dht.cpp: In member function 'int8_t dht::_readSensor(uint8_t, uint8_t, uint8_t)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DHTlib/dht.cpp:215:19: error: 'digitalPinToBitMask' was not declared in this scope
uint8_t bit = digitalPinToBitMask(pin);
^~~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DHTlib/dht.cpp:215:19: note: suggested alternative: 'digitalPinToPinName'
uint8_t bit = digitalPinToBitMask(pin);
^~~~~~~~~~~~~~~~~~~
digitalPinToPinName
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DHTlib/dht.cpp:217:29: error: 'portInputRegister' was not declared in this scope
volatile uint8_t *PIR = portInputRegister(port);
^~~~~~~~~~~~~~~~~
Multiple libraries were found for "dht.h"
Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DHTlib
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/UncleRus
Result: FAIL
WARNING: library DHTlib claims to run on avr architecture(s) and may be incompatible with your current board which runs on mbed_nano architecture(s).
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DHTlib/examples/dht22_test/dht22_test.ino:25:3: error: '<unnamed struct> stat' redeclared as different kind of symbol
} stat = { 0,0,0,0,0,0,0,0};
^~~~
In file included from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/cores/arduino/mbed/platform/include/platform/platform.h:26:0,
from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/cores/arduino/mbed/platform/include/platform/FileHandle.h:25,
from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/cores/arduino/macros.h:41,
from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/variants/NANO_RP2040_CONNECT/pins_arduino.h:2,
from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/cores/arduino/Arduino.h:76,
from /tmp/arduino-sketch-807D8FF5E74CE9A6D5DCC77CD88CD09C/sketch/dht22_test.ino.cpp:1:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/cores/arduino/mbed/platform/include/platform/mbed_retarget.h:750:9: note: previous declaration 'int stat(const char*, stat*)'
int stat(const char *path, struct stat *st);
^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DHTlib/examples/dht22_test/dht22_test.ino: In function 'void loop()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DHTlib/examples/dht22_test/dht22_test.ino:48:10: error: request for member 'total' in 'stat', which is of non-class type 'int(const char*, stat*)'
stat.total++;
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DHTlib/examples/dht22_test/dht22_test.ino:52:14: error: request for member 'ok' in 'stat', which is of non-class type 'int(const char*, stat*)'
stat.ok++;
^~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DHTlib/examples/dht22_test/dht22_test.ino:56:14: error: request for member 'crc_error' in 'stat', which is of non-class type 'int(const char*, stat*)'
stat.crc_error++;
^~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DHTlib/examples/dht22_test/dht22_test.ino:60:14: error: request for member 'time_out' in 'stat', which is of non-class type 'int(const char*, stat*)'
stat.time_out++;
^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DHTlib/examples/dht22_test/dht22_test.ino:64:14: error: request for member 'connect' in 'stat', which is of non-class type 'int(const char*, stat*)'
stat.connect++;
^~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DHTlib/examples/dht22_test/dht22_test.ino:68:14: error: request for member 'ack_l' in 'stat', which is of non-class type 'int(const char*, stat*)'
stat.ack_l++;
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DHTlib/examples/dht22_test/dht22_test.ino:72:14: error: request for member 'ack_h' in 'stat', which is of non-class type 'int(const char*, stat*)'
stat.ack_h++;
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DHTlib/examples/dht22_test/dht22_test.ino:76:14: error: request for member 'unknown' in 'stat', which is of non-class type 'int(const char*, stat*)'
stat.unknown++;
^~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DHTlib/examples/dht22_test/dht22_test.ino:88:14: error: request for member 'total' in 'stat', which is of non-class type 'int(const char*, stat*)'
if (stat.total % 20 == 0)
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DHTlib/examples/dht22_test/dht22_test.ino:91:27: error: request for member 'total' in 'stat', which is of non-class type 'int(const char*, stat*)'
Serial.print(stat.total);
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DHTlib/examples/dht22_test/dht22_test.ino:93:27: error: request for member 'ok' in 'stat', which is of non-class type 'int(const char*, stat*)'
Serial.print(stat.ok);
^~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DHTlib/examples/dht22_test/dht22_test.ino:95:27: error: request for member 'crc_error' in 'stat', which is of non-class type 'int(const char*, stat*)'
Serial.print(stat.crc_error);
^~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DHTlib/examples/dht22_test/dht22_test.ino:97:27: error: request for member 'time_out' in 'stat', which is of non-class type 'int(const char*, stat*)'
Serial.print(stat.time_out);
^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DHTlib/examples/dht22_test/dht22_test.ino:99:27: error: request for member 'connect' in 'stat', which is of non-class type 'int(const char*, stat*)'
Serial.print(stat.connect);
^~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DHTlib/examples/dht22_test/dht22_test.ino:101:27: error: request for member 'ack_l' in 'stat', which is of non-class type 'int(const char*, stat*)'
Serial.print(stat.ack_l);
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DHTlib/examples/dht22_test/dht22_test.ino:103:27: error: request for member 'ack_h' in 'stat', which is of non-class type 'int(const char*, stat*)'
Serial.print(stat.ack_h);
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DHTlib/examples/dht22_test/dht22_test.ino:105:27: error: request for member 'unknown' in 'stat', which is of non-class type 'int(const char*, stat*)'
Serial.print(stat.unknown);
^~~~~~~
Multiple libraries were found for "dht.h"
Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DHTlib
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/UncleRus
Result: FAIL
WARNING: library DHTlib claims to run on avr architecture(s) and may be incompatible with your current board which runs on mbed_nano architecture(s).
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DHTlib/examples/dht22_test_noIRQ/dht22_test_noIRQ.ino:27:3: error: '<unnamed struct> stat' redeclared as different kind of symbol
} stat = { 0,0,0,0,0,0,0,0, 0, 9999};
^~~~
In file included from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/cores/arduino/mbed/platform/include/platform/platform.h:26:0,
from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/cores/arduino/mbed/platform/include/platform/FileHandle.h:25,
from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/cores/arduino/macros.h:41,
from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/variants/NANO_RP2040_CONNECT/pins_arduino.h:2,
from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/cores/arduino/Arduino.h:76,
from /tmp/arduino-sketch-62A0D841020CEDCE0702F61FEE4E1359/sketch/dht22_test_noIRQ.ino.cpp:1:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/cores/arduino/mbed/platform/include/platform/mbed_retarget.h:750:9: note: previous declaration 'int stat(const char*, stat*)'
int stat(const char *path, struct stat *st);
^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DHTlib/examples/dht22_test_noIRQ/dht22_test_noIRQ.ino: In function 'void loop()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DHTlib/examples/dht22_test_noIRQ/dht22_test_noIRQ.ino:57:10: error: request for member 'total' in 'stat', which is of non-class type 'int(const char*, stat*)'
stat.total++;
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DHTlib/examples/dht22_test_noIRQ/dht22_test_noIRQ.ino:61:14: error: request for member 'ok' in 'stat', which is of non-class type 'int(const char*, stat*)'
stat.ok++;
^~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DHTlib/examples/dht22_test_noIRQ/dht22_test_noIRQ.ino:65:14: error: request for member 'crc_error' in 'stat', which is of non-class type 'int(const char*, stat*)'
stat.crc_error++;
^~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DHTlib/examples/dht22_test_noIRQ/dht22_test_noIRQ.ino:69:14: error: request for member 'time_out' in 'stat', which is of non-class type 'int(const char*, stat*)'
stat.time_out++;
^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DHTlib/examples/dht22_test_noIRQ/dht22_test_noIRQ.ino:73:14: error: request for member 'connect' in 'stat', which is of non-class type 'int(const char*, stat*)'
stat.connect++;
^~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DHTlib/examples/dht22_test_noIRQ/dht22_test_noIRQ.ino:77:14: error: request for member 'ack_l' in 'stat', which is of non-class type 'int(const char*, stat*)'
stat.ack_l++;
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DHTlib/examples/dht22_test_noIRQ/dht22_test_noIRQ.ino:81:14: error: request for member 'ack_h' in 'stat', which is of non-class type 'int(const char*, stat*)'
stat.ack_h++;
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DHTlib/examples/dht22_test_noIRQ/dht22_test_noIRQ.ino:85:14: error: request for member 'unknown' in 'stat', which is of non-class type 'int(const char*, stat*)'
stat.unknown++;
^~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DHTlib/examples/dht22_test_noIRQ/dht22_test_noIRQ.ino:95:10: error: request for member 'sumtime' in 'stat', which is of non-class type 'int(const char*, stat*)'
stat.sumtime += duration;
^~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DHTlib/examples/dht22_test_noIRQ/dht22_test_noIRQ.ino:96:10: error: request for member 'mintime' in 'stat', which is of non-class type 'int(const char*, stat*)'
stat.mintime = min(stat.mintime, duration);
^~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DHTlib/examples/dht22_test_noIRQ/dht22_test_noIRQ.ino:96:29: error: request for member 'mintime' in 'stat', which is of non-class type 'int(const char*, stat*)'
stat.mintime = min(stat.mintime, duration);
^~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DHTlib/examples/dht22_test_noIRQ/dht22_test_noIRQ.ino:100:14: error: request for member 'total' in 'stat', which is of non-class type 'int(const char*, stat*)'
if (stat.total % 20 == 0)
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DHTlib/examples/dht22_test_noIRQ/dht22_test_noIRQ.ino:103:27: error: request for member 'total' in 'stat', which is of non-class type 'int(const char*, stat*)'
Serial.print(stat.total);
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DHTlib/examples/dht22_test_noIRQ/dht22_test_noIRQ.ino:105:27: error: request for member 'ok' in 'stat', which is of non-class type 'int(const char*, stat*)'
Serial.print(stat.ok);
^~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DHTlib/examples/dht22_test_noIRQ/dht22_test_noIRQ.ino:107:27: error: request for member 'crc_error' in 'stat', which is of non-class type 'int(const char*, stat*)'
Serial.print(stat.crc_error);
^~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DHTlib/examples/dht22_test_noIRQ/dht22_test_noIRQ.ino:109:27: error: request for member 'time_out' in 'stat', which is of non-class type 'int(const char*, stat*)'
Serial.print(stat.time_out);
^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DHTlib/examples/dht22_test_noIRQ/dht22_test_noIRQ.ino:111:27: error: request for member 'connect' in 'stat', which is of non-class type 'int(const char*, stat*)'
Serial.print(stat.connect);
^~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DHTlib/examples/dht22_test_noIRQ/dht22_test_noIRQ.ino:113:27: error: request for member 'ack_l' in 'stat', which is of non-class type 'int(const char*, stat*)'
Serial.print(stat.ack_l);
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DHTlib/examples/dht22_test_noIRQ/dht22_test_noIRQ.ino:115:27: error: request for member 'ack_h' in 'stat', which is of non-class type 'int(const char*, stat*)'
Serial.print(stat.ack_h);
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DHTlib/examples/dht22_test_noIRQ/dht22_test_noIRQ.ino:117:27: error: request for member 'unknown' in 'stat', which is of non-class type 'int(const char*, stat*)'
Serial.print(stat.unknown);
^~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DHTlib/examples/dht22_test_noIRQ/dht22_test_noIRQ.ino:119:33: error: request for member 'sumtime' in 'stat', which is of non-class type 'int(const char*, stat*)'
Serial.print(1.0 * stat.sumtime / stat.total);
^~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DHTlib/examples/dht22_test_noIRQ/dht22_test_noIRQ.ino:119:48: error: request for member 'total' in 'stat', which is of non-class type 'int(const char*, stat*)'
Serial.print(1.0 * stat.sumtime / stat.total);
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DHTlib/examples/dht22_test_noIRQ/dht22_test_noIRQ.ino:121:33: error: request for member 'mintime' in 'stat', which is of non-class type 'int(const char*, stat*)'
Serial.print(1.0 * stat.mintime);
^~~~~~~
Multiple libraries were found for "dht.h"
Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DHTlib
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/UncleRus
Result: FAIL
WARNING: library DHTlib claims to run on avr architecture(s) and may be incompatible with your current board which runs on mbed_nano architecture(s).
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DHTlib/dht.cpp: In member function 'int8_t dht::_readSensor(uint8_t, uint8_t, uint8_t)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DHTlib/dht.cpp:215:19: error: 'digitalPinToBitMask' was not declared in this scope
uint8_t bit = digitalPinToBitMask(pin);
^~~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DHTlib/dht.cpp:215:19: note: suggested alternative: 'digitalPinToPinName'
uint8_t bit = digitalPinToBitMask(pin);
^~~~~~~~~~~~~~~~~~~
digitalPinToPinName
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DHTlib/dht.cpp:217:29: error: 'portInputRegister' was not declared in this scope
volatile uint8_t *PIR = portInputRegister(port);
^~~~~~~~~~~~~~~~~
Multiple libraries were found for "dht.h"
Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DHTlib
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/UncleRus
Result: FAIL
WARNING: library DHTlib claims to run on avr architecture(s) and may be incompatible with your current board which runs on mbed_nano architecture(s).
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DHTlib/dht.cpp: In member function 'int8_t dht::_readSensor(uint8_t, uint8_t, uint8_t)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DHTlib/dht.cpp:215:19: error: 'digitalPinToBitMask' was not declared in this scope
uint8_t bit = digitalPinToBitMask(pin);
^~~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DHTlib/dht.cpp:215:19: note: suggested alternative: 'digitalPinToPinName'
uint8_t bit = digitalPinToBitMask(pin);
^~~~~~~~~~~~~~~~~~~
digitalPinToPinName
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DHTlib/dht.cpp:217:29: error: 'portInputRegister' was not declared in this scope
volatile uint8_t *PIR = portInputRegister(port);
^~~~~~~~~~~~~~~~~
Multiple libraries were found for "dht.h"
Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DHTlib
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/UncleRus
Result: FAIL
WARNING: library DHTlib claims to run on avr architecture(s) and may be incompatible with your current board which runs on mbed_nano architecture(s).
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DHTlib/dht.cpp: In member function 'int8_t dht::_readSensor(uint8_t, uint8_t, uint8_t)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DHTlib/dht.cpp:215:19: error: 'digitalPinToBitMask' was not declared in this scope
uint8_t bit = digitalPinToBitMask(pin);
^~~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DHTlib/dht.cpp:215:19: note: suggested alternative: 'digitalPinToPinName'
uint8_t bit = digitalPinToBitMask(pin);
^~~~~~~~~~~~~~~~~~~
digitalPinToPinName
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DHTlib/dht.cpp:217:29: error: 'portInputRegister' was not declared in this scope
volatile uint8_t *PIR = portInputRegister(port);
^~~~~~~~~~~~~~~~~
Multiple libraries were found for "dht.h"
Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DHTlib
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/UncleRus
Result: FAIL
WARNING: library DHTlib claims to run on avr architecture(s) and may be incompatible with your current board which runs on mbed_nano architecture(s).
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DHTlib/dht.cpp: In member function 'int8_t dht::_readSensor(uint8_t, uint8_t, uint8_t)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DHTlib/dht.cpp:215:19: error: 'digitalPinToBitMask' was not declared in this scope
uint8_t bit = digitalPinToBitMask(pin);
^~~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DHTlib/dht.cpp:215:19: note: suggested alternative: 'digitalPinToPinName'
uint8_t bit = digitalPinToBitMask(pin);
^~~~~~~~~~~~~~~~~~~
digitalPinToPinName
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DHTlib/dht.cpp:217:29: error: 'portInputRegister' was not declared in this scope
volatile uint8_t *PIR = portInputRegister(port);
^~~~~~~~~~~~~~~~~
Multiple libraries were found for "dht.h"
Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DHTlib
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/UncleRus
Result: PASS
This library has no main header file so an empty one was created.
WARNING: library DHTlib claims to run on avr architecture(s) and may be incompatible with your current board which runs on megaavr architecture(s). Sketch uses 802 bytes (1%) of program storage space. Maximum is 49152 bytes. Global variables use 22 bytes (0%) of dynamic memory, leaving 6122 bytes for local variables. Maximum is 6144 bytes.
Result: PASS
WARNING: library DHTlib claims to run on avr architecture(s) and may be incompatible with your current board which runs on megaavr architecture(s). Sketch uses 5086 bytes (10%) of program storage space. Maximum is 49152 bytes. Global variables use 191 bytes (3%) of dynamic memory, leaving 5953 bytes for local variables. Maximum is 6144 bytes.
Result: PASS
WARNING: library DHTlib claims to run on avr architecture(s) and may be incompatible with your current board which runs on megaavr architecture(s). Sketch uses 5103 bytes (10%) of program storage space. Maximum is 49152 bytes. Global variables use 191 bytes (3%) of dynamic memory, leaving 5953 bytes for local variables. Maximum is 6144 bytes.
Result: PASS
WARNING: library DHTlib claims to run on avr architecture(s) and may be incompatible with your current board which runs on megaavr architecture(s). Sketch uses 5128 bytes (10%) of program storage space. Maximum is 49152 bytes. Global variables use 191 bytes (3%) of dynamic memory, leaving 5953 bytes for local variables. Maximum is 6144 bytes.
Result: PASS
WARNING: library DHTlib claims to run on avr architecture(s) and may be incompatible with your current board which runs on megaavr architecture(s). Sketch uses 4853 bytes (9%) of program storage space. Maximum is 49152 bytes. Global variables use 181 bytes (2%) of dynamic memory, leaving 5963 bytes for local variables. Maximum is 6144 bytes.
Result: PASS
WARNING: library DHTlib claims to run on avr architecture(s) and may be incompatible with your current board which runs on megaavr architecture(s). Sketch uses 5788 bytes (11%) of program storage space. Maximum is 49152 bytes. Global variables use 223 bytes (3%) of dynamic memory, leaving 5921 bytes for local variables. Maximum is 6144 bytes.
Result: PASS
WARNING: library DHTlib claims to run on avr architecture(s) and may be incompatible with your current board which runs on megaavr architecture(s). Sketch uses 6441 bytes (13%) of program storage space. Maximum is 49152 bytes. Global variables use 231 bytes (3%) of dynamic memory, leaving 5913 bytes for local variables. Maximum is 6144 bytes.
Result: PASS
WARNING: library DHTlib claims to run on avr architecture(s) and may be incompatible with your current board which runs on megaavr architecture(s). Sketch uses 5172 bytes (10%) of program storage space. Maximum is 49152 bytes. Global variables use 191 bytes (3%) of dynamic memory, leaving 5953 bytes for local variables. Maximum is 6144 bytes.
Result: PASS
WARNING: library DHTlib claims to run on avr architecture(s) and may be incompatible with your current board which runs on megaavr architecture(s). Sketch uses 5172 bytes (10%) of program storage space. Maximum is 49152 bytes. Global variables use 191 bytes (3%) of dynamic memory, leaving 5953 bytes for local variables. Maximum is 6144 bytes.
Result: PASS
WARNING: library DHTlib claims to run on avr architecture(s) and may be incompatible with your current board which runs on megaavr architecture(s). Sketch uses 5828 bytes (11%) of program storage space. Maximum is 49152 bytes. Global variables use 191 bytes (3%) of dynamic memory, leaving 5953 bytes for local variables. Maximum is 6144 bytes.
Result: PASS
WARNING: library DHTlib claims to run on avr architecture(s) and may be incompatible with your current board which runs on megaavr architecture(s). Sketch uses 5498 bytes (11%) of program storage space. Maximum is 49152 bytes. Global variables use 213 bytes (3%) of dynamic memory, leaving 5931 bytes for local variables. Maximum is 6144 bytes.
Result: FAIL
This library has no main header file so an empty one was created.
WARNING: library DHTlib claims to run on avr architecture(s) and may be incompatible with your current board which runs on samd architecture(s).
In file included from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/cores/arduino/Arduino.h:51:0,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DHTlib/dht.h:15,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DHTlib/dht.cpp:56:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DHTlib/dht.cpp: In member function 'int8_t dht::_readSensor(uint8_t, uint8_t, uint8_t)':
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/variants/mkrwifi1010/variant.h:49:35: error: invalid conversion from 'PortGroup*' to 'uint8_t {aka unsigned char}' [-fpermissive]
#define digitalPinToPort(P) (&(PORT->Group[g_APinDescription[P].ulPort]))
~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DHTlib/dht.cpp:216:20: note: in expansion of macro 'digitalPinToPort'
uint8_t port = digitalPinToPort(pin);
^~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/variants/mkrwifi1010/variant.h:53:41: error: base operand of '->' is not a pointer
#define portInputRegister(port) (&(port->IN.reg))
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DHTlib/dht.cpp:217:29: note: in expansion of macro 'portInputRegister'
volatile uint8_t *PIR = portInputRegister(port);
^~~~~~~~~~~~~~~~~
Multiple libraries were found for "dht.h"
Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DHTlib
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/UncleRus
Result: FAIL
WARNING: library DHTlib claims to run on avr architecture(s) and may be incompatible with your current board which runs on samd architecture(s).
In file included from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/cores/arduino/Arduino.h:51:0,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DHTlib/dht.h:15,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DHTlib/dht.cpp:56:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DHTlib/dht.cpp: In member function 'int8_t dht::_readSensor(uint8_t, uint8_t, uint8_t)':
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/variants/mkrwifi1010/variant.h:49:35: error: invalid conversion from 'PortGroup*' to 'uint8_t {aka unsigned char}' [-fpermissive]
#define digitalPinToPort(P) (&(PORT->Group[g_APinDescription[P].ulPort]))
~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DHTlib/dht.cpp:216:20: note: in expansion of macro 'digitalPinToPort'
uint8_t port = digitalPinToPort(pin);
^~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/variants/mkrwifi1010/variant.h:53:41: error: base operand of '->' is not a pointer
#define portInputRegister(port) (&(port->IN.reg))
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DHTlib/dht.cpp:217:29: note: in expansion of macro 'portInputRegister'
volatile uint8_t *PIR = portInputRegister(port);
^~~~~~~~~~~~~~~~~
Multiple libraries were found for "dht.h"
Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DHTlib
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/UncleRus
Result: FAIL
WARNING: library DHTlib claims to run on avr architecture(s) and may be incompatible with your current board which runs on samd architecture(s).
In file included from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/cores/arduino/Arduino.h:51:0,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DHTlib/dht.h:15,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DHTlib/dht.cpp:56:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DHTlib/dht.cpp: In member function 'int8_t dht::_readSensor(uint8_t, uint8_t, uint8_t)':
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/variants/mkrwifi1010/variant.h:49:35: error: invalid conversion from 'PortGroup*' to 'uint8_t {aka unsigned char}' [-fpermissive]
#define digitalPinToPort(P) (&(PORT->Group[g_APinDescription[P].ulPort]))
~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DHTlib/dht.cpp:216:20: note: in expansion of macro 'digitalPinToPort'
uint8_t port = digitalPinToPort(pin);
^~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/variants/mkrwifi1010/variant.h:53:41: error: base operand of '->' is not a pointer
#define portInputRegister(port) (&(port->IN.reg))
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DHTlib/dht.cpp:217:29: note: in expansion of macro 'portInputRegister'
volatile uint8_t *PIR = portInputRegister(port);
^~~~~~~~~~~~~~~~~
Multiple libraries were found for "dht.h"
Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DHTlib
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/UncleRus
Result: FAIL
WARNING: library DHTlib claims to run on avr architecture(s) and may be incompatible with your current board which runs on samd architecture(s).
In file included from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/cores/arduino/Arduino.h:51:0,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DHTlib/dht.h:15,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DHTlib/dht.cpp:56:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DHTlib/dht.cpp: In member function 'int8_t dht::_readSensor(uint8_t, uint8_t, uint8_t)':
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/variants/mkrwifi1010/variant.h:49:35: error: invalid conversion from 'PortGroup*' to 'uint8_t {aka unsigned char}' [-fpermissive]
#define digitalPinToPort(P) (&(PORT->Group[g_APinDescription[P].ulPort]))
~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DHTlib/dht.cpp:216:20: note: in expansion of macro 'digitalPinToPort'
uint8_t port = digitalPinToPort(pin);
^~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/variants/mkrwifi1010/variant.h:53:41: error: base operand of '->' is not a pointer
#define portInputRegister(port) (&(port->IN.reg))
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DHTlib/dht.cpp:217:29: note: in expansion of macro 'portInputRegister'
volatile uint8_t *PIR = portInputRegister(port);
^~~~~~~~~~~~~~~~~
Multiple libraries were found for "dht.h"
Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DHTlib
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/UncleRus
Result: FAIL
WARNING: library DHTlib claims to run on avr architecture(s) and may be incompatible with your current board which runs on samd architecture(s).
In file included from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/cores/arduino/Arduino.h:51:0,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DHTlib/dht.h:15,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DHTlib/dht.cpp:56:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DHTlib/dht.cpp: In member function 'int8_t dht::_readSensor(uint8_t, uint8_t, uint8_t)':
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/variants/mkrwifi1010/variant.h:49:35: error: invalid conversion from 'PortGroup*' to 'uint8_t {aka unsigned char}' [-fpermissive]
#define digitalPinToPort(P) (&(PORT->Group[g_APinDescription[P].ulPort]))
~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DHTlib/dht.cpp:216:20: note: in expansion of macro 'digitalPinToPort'
uint8_t port = digitalPinToPort(pin);
^~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/variants/mkrwifi1010/variant.h:53:41: error: base operand of '->' is not a pointer
#define portInputRegister(port) (&(port->IN.reg))
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DHTlib/dht.cpp:217:29: note: in expansion of macro 'portInputRegister'
volatile uint8_t *PIR = portInputRegister(port);
^~~~~~~~~~~~~~~~~
Multiple libraries were found for "dht.h"
Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DHTlib
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/UncleRus
Result: FAIL
WARNING: library DHTlib claims to run on avr architecture(s) and may be incompatible with your current board which runs on samd architecture(s).
In file included from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/cores/arduino/Arduino.h:51:0,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DHTlib/dht.h:15,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DHTlib/dht.cpp:56:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DHTlib/dht.cpp: In member function 'int8_t dht::_readSensor(uint8_t, uint8_t, uint8_t)':
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/variants/mkrwifi1010/variant.h:49:35: error: invalid conversion from 'PortGroup*' to 'uint8_t {aka unsigned char}' [-fpermissive]
#define digitalPinToPort(P) (&(PORT->Group[g_APinDescription[P].ulPort]))
~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DHTlib/dht.cpp:216:20: note: in expansion of macro 'digitalPinToPort'
uint8_t port = digitalPinToPort(pin);
^~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/variants/mkrwifi1010/variant.h:53:41: error: base operand of '->' is not a pointer
#define portInputRegister(port) (&(port->IN.reg))
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DHTlib/dht.cpp:217:29: note: in expansion of macro 'portInputRegister'
volatile uint8_t *PIR = portInputRegister(port);
^~~~~~~~~~~~~~~~~
Multiple libraries were found for "dht.h"
Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DHTlib
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/UncleRus
Result: FAIL
WARNING: library DHTlib claims to run on avr architecture(s) and may be incompatible with your current board which runs on samd architecture(s).
In file included from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/cores/arduino/Arduino.h:51:0,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DHTlib/dht.h:15,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DHTlib/dht.cpp:56:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DHTlib/dht.cpp: In member function 'int8_t dht::_readSensor(uint8_t, uint8_t, uint8_t)':
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/variants/mkrwifi1010/variant.h:49:35: error: invalid conversion from 'PortGroup*' to 'uint8_t {aka unsigned char}' [-fpermissive]
#define digitalPinToPort(P) (&(PORT->Group[g_APinDescription[P].ulPort]))
~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DHTlib/dht.cpp:216:20: note: in expansion of macro 'digitalPinToPort'
uint8_t port = digitalPinToPort(pin);
^~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/variants/mkrwifi1010/variant.h:53:41: error: base operand of '->' is not a pointer
#define portInputRegister(port) (&(port->IN.reg))
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DHTlib/dht.cpp:217:29: note: in expansion of macro 'portInputRegister'
volatile uint8_t *PIR = portInputRegister(port);
^~~~~~~~~~~~~~~~~
Multiple libraries were found for "dht.h"
Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DHTlib
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/UncleRus
Result: FAIL
WARNING: library DHTlib claims to run on avr architecture(s) and may be incompatible with your current board which runs on samd architecture(s).
In file included from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/cores/arduino/Arduino.h:51:0,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DHTlib/dht.h:15,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DHTlib/dht.cpp:56:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DHTlib/dht.cpp: In member function 'int8_t dht::_readSensor(uint8_t, uint8_t, uint8_t)':
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/variants/mkrwifi1010/variant.h:49:35: error: invalid conversion from 'PortGroup*' to 'uint8_t {aka unsigned char}' [-fpermissive]
#define digitalPinToPort(P) (&(PORT->Group[g_APinDescription[P].ulPort]))
~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DHTlib/dht.cpp:216:20: note: in expansion of macro 'digitalPinToPort'
uint8_t port = digitalPinToPort(pin);
^~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/variants/mkrwifi1010/variant.h:53:41: error: base operand of '->' is not a pointer
#define portInputRegister(port) (&(port->IN.reg))
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DHTlib/dht.cpp:217:29: note: in expansion of macro 'portInputRegister'
volatile uint8_t *PIR = portInputRegister(port);
^~~~~~~~~~~~~~~~~
Multiple libraries were found for "dht.h"
Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DHTlib
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/UncleRus
Result: FAIL
WARNING: library DHTlib claims to run on avr architecture(s) and may be incompatible with your current board which runs on samd architecture(s).
In file included from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/cores/arduino/Arduino.h:51:0,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DHTlib/dht.h:15,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DHTlib/dht.cpp:56:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DHTlib/dht.cpp: In member function 'int8_t dht::_readSensor(uint8_t, uint8_t, uint8_t)':
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/variants/mkrwifi1010/variant.h:49:35: error: invalid conversion from 'PortGroup*' to 'uint8_t {aka unsigned char}' [-fpermissive]
#define digitalPinToPort(P) (&(PORT->Group[g_APinDescription[P].ulPort]))
~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DHTlib/dht.cpp:216:20: note: in expansion of macro 'digitalPinToPort'
uint8_t port = digitalPinToPort(pin);
^~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/variants/mkrwifi1010/variant.h:53:41: error: base operand of '->' is not a pointer
#define portInputRegister(port) (&(port->IN.reg))
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DHTlib/dht.cpp:217:29: note: in expansion of macro 'portInputRegister'
volatile uint8_t *PIR = portInputRegister(port);
^~~~~~~~~~~~~~~~~
Multiple libraries were found for "dht.h"
Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DHTlib
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/UncleRus
Result: FAIL
WARNING: library DHTlib claims to run on avr architecture(s) and may be incompatible with your current board which runs on samd architecture(s).
In file included from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/cores/arduino/Arduino.h:51:0,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DHTlib/dht.h:15,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DHTlib/dht.cpp:56:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DHTlib/dht.cpp: In member function 'int8_t dht::_readSensor(uint8_t, uint8_t, uint8_t)':
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/variants/mkrwifi1010/variant.h:49:35: error: invalid conversion from 'PortGroup*' to 'uint8_t {aka unsigned char}' [-fpermissive]
#define digitalPinToPort(P) (&(PORT->Group[g_APinDescription[P].ulPort]))
~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DHTlib/dht.cpp:216:20: note: in expansion of macro 'digitalPinToPort'
uint8_t port = digitalPinToPort(pin);
^~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/variants/mkrwifi1010/variant.h:53:41: error: base operand of '->' is not a pointer
#define portInputRegister(port) (&(port->IN.reg))
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DHTlib/dht.cpp:217:29: note: in expansion of macro 'portInputRegister'
volatile uint8_t *PIR = portInputRegister(port);
^~~~~~~~~~~~~~~~~
Multiple libraries were found for "dht.h"
Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DHTlib
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/UncleRus
Result: FAIL
WARNING: library DHTlib claims to run on avr architecture(s) and may be incompatible with your current board which runs on samd architecture(s).
In file included from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/cores/arduino/Arduino.h:51:0,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DHTlib/dht.h:15,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DHTlib/dht.cpp:56:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DHTlib/dht.cpp: In member function 'int8_t dht::_readSensor(uint8_t, uint8_t, uint8_t)':
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/variants/mkrwifi1010/variant.h:49:35: error: invalid conversion from 'PortGroup*' to 'uint8_t {aka unsigned char}' [-fpermissive]
#define digitalPinToPort(P) (&(PORT->Group[g_APinDescription[P].ulPort]))
~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DHTlib/dht.cpp:216:20: note: in expansion of macro 'digitalPinToPort'
uint8_t port = digitalPinToPort(pin);
^~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/variants/mkrwifi1010/variant.h:53:41: error: base operand of '->' is not a pointer
#define portInputRegister(port) (&(port->IN.reg))
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DHTlib/dht.cpp:217:29: note: in expansion of macro 'portInputRegister'
volatile uint8_t *PIR = portInputRegister(port);
^~~~~~~~~~~~~~~~~
Multiple libraries were found for "dht.h"
Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DHTlib
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/UncleRus
Result: PASS
This library has no main header file so an empty one was created.
Sketch uses 197736 bytes (15%) of program storage space. Maximum is 1310720 bytes. Global variables use 13072 bytes (3%) of dynamic memory, leaving 314608 bytes for local variables. Maximum is 327680 bytes.
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DHTlib/examples/dht11_test/dht11_test.ino:10:1: error: 'dht' does not name a type
dht DHT;
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DHTlib/examples/dht11_test/dht11_test.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DHTlib/examples/dht11_test/dht11_test.ino:20:18: error: 'DHT_LIB_VERSION' was not declared in this scope
Serial.println(DHT_LIB_VERSION);
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DHTlib/examples/dht11_test/dht11_test.ino: In function 'void loop()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DHTlib/examples/dht11_test/dht11_test.ino:30:13: error: 'DHT' was not declared in this scope
int chk = DHT.read11(DHT11_PIN);
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DHTlib/examples/dht11_test/dht11_test.ino:33:10: error: 'DHTLIB_OK' was not declared in this scope
case DHTLIB_OK:
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DHTlib/examples/dht11_test/dht11_test.ino:36:10: error: 'DHTLIB_ERROR_CHECKSUM' was not declared in this scope
case DHTLIB_ERROR_CHECKSUM:
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DHTlib/examples/dht11_test/dht11_test.ino:39:10: error: 'DHTLIB_ERROR_TIMEOUT' was not declared in this scope
case DHTLIB_ERROR_TIMEOUT:
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DHTlib/examples/dht11_test/dht11_test.ino:42:10: error: 'DHTLIB_ERROR_CONNECT' was not declared in this scope
case DHTLIB_ERROR_CONNECT:
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DHTlib/examples/dht11_test/dht11_test.ino:45:10: error: 'DHTLIB_ERROR_ACK_L' was not declared in this scope
case DHTLIB_ERROR_ACK_L:
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DHTlib/examples/dht11_test/dht11_test.ino:48:10: error: 'DHTLIB_ERROR_ACK_H' was not declared in this scope
case DHTLIB_ERROR_ACK_H:
^
Multiple libraries were found for "dht.h"
Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/UncleRus
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DHTlib
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DHTlib/examples/dht12_test/dht12_test.ino:10:1: error: 'dht' does not name a type
dht DHT;
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DHTlib/examples/dht12_test/dht12_test.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DHTlib/examples/dht12_test/dht12_test.ino:20:18: error: 'DHT_LIB_VERSION' was not declared in this scope
Serial.println(DHT_LIB_VERSION);
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DHTlib/examples/dht12_test/dht12_test.ino: In function 'void loop()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DHTlib/examples/dht12_test/dht12_test.ino:30:13: error: 'DHT' was not declared in this scope
int chk = DHT.read12(DHT12_PIN);
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DHTlib/examples/dht12_test/dht12_test.ino:33:10: error: 'DHTLIB_OK' was not declared in this scope
case DHTLIB_OK:
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DHTlib/examples/dht12_test/dht12_test.ino:36:10: error: 'DHTLIB_ERROR_CHECKSUM' was not declared in this scope
case DHTLIB_ERROR_CHECKSUM:
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DHTlib/examples/dht12_test/dht12_test.ino:39:10: error: 'DHTLIB_ERROR_TIMEOUT' was not declared in this scope
case DHTLIB_ERROR_TIMEOUT:
^
Multiple libraries were found for "dht.h"
Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/UncleRus
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DHTlib
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DHTlib/examples/dht21_test/dht21_test.ino:10:1: error: 'dht' does not name a type
dht DHT;
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DHTlib/examples/dht21_test/dht21_test.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DHTlib/examples/dht21_test/dht21_test.ino:20:20: error: 'DHT_LIB_VERSION' was not declared in this scope
Serial.println(DHT_LIB_VERSION);
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DHTlib/examples/dht21_test/dht21_test.ino: In function 'void loop()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DHTlib/examples/dht21_test/dht21_test.ino:30:15: error: 'DHT' was not declared in this scope
int chk = DHT.read21(DHT21_PIN);
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DHTlib/examples/dht21_test/dht21_test.ino:33:10: error: 'DHTLIB_OK' was not declared in this scope
case DHTLIB_OK:
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DHTlib/examples/dht21_test/dht21_test.ino:36:10: error: 'DHTLIB_ERROR_CHECKSUM' was not declared in this scope
case DHTLIB_ERROR_CHECKSUM:
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DHTlib/examples/dht21_test/dht21_test.ino:39:10: error: 'DHTLIB_ERROR_TIMEOUT' was not declared in this scope
case DHTLIB_ERROR_TIMEOUT:
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DHTlib/examples/dht21_test/dht21_test.ino:42:10: error: 'DHTLIB_ERROR_CONNECT' was not declared in this scope
case DHTLIB_ERROR_CONNECT:
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DHTlib/examples/dht21_test/dht21_test.ino:45:10: error: 'DHTLIB_ERROR_ACK_L' was not declared in this scope
case DHTLIB_ERROR_ACK_L:
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DHTlib/examples/dht21_test/dht21_test.ino:48:10: error: 'DHTLIB_ERROR_ACK_H' was not declared in this scope
case DHTLIB_ERROR_ACK_H:
^
Multiple libraries were found for "dht.h"
Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/UncleRus
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DHTlib
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DHTlib/examples/dht22_in_function/dht22_in_function.ino: In function 'void printDHT(uint8_t)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DHTlib/examples/dht22_in_function/dht22_in_function.ino:24:3: error: 'dht' was not declared in this scope
dht DHT;
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DHTlib/examples/dht22_in_function/dht22_in_function.ino:26:13: error: 'DHT' was not declared in this scope
int chk = DHT.read22(pin);
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DHTlib/examples/dht22_in_function/dht22_in_function.ino:27:14: error: 'DHTLIB_OK' was not declared in this scope
if (chk == DHTLIB_OK)
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DHTlib/examples/dht22_in_function/dht22_in_function.ino:40:10: error: 'DHTLIB_ERROR_CHECKSUM' was not declared in this scope
case DHTLIB_ERROR_CHECKSUM:
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DHTlib/examples/dht22_in_function/dht22_in_function.ino:43:10: error: 'DHTLIB_ERROR_TIMEOUT' was not declared in this scope
case DHTLIB_ERROR_TIMEOUT:
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DHTlib/examples/dht22_in_function/dht22_in_function.ino:46:10: error: 'DHTLIB_ERROR_CONNECT' was not declared in this scope
case DHTLIB_ERROR_CONNECT:
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DHTlib/examples/dht22_in_function/dht22_in_function.ino:49:10: error: 'DHTLIB_ERROR_ACK_L' was not declared in this scope
case DHTLIB_ERROR_ACK_L:
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DHTlib/examples/dht22_in_function/dht22_in_function.ino:52:10: error: 'DHTLIB_ERROR_ACK_H' was not declared in this scope
case DHTLIB_ERROR_ACK_H:
^
Multiple libraries were found for "dht.h"
Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/UncleRus
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DHTlib
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DHTlib/examples/dht22_test/dht22_test.ino:10:1: error: 'dht' does not name a type
dht DHT;
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DHTlib/examples/dht22_test/dht22_test.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DHTlib/examples/dht22_test/dht22_test.ino:33:20: error: 'DHT_LIB_VERSION' was not declared in this scope
Serial.println(DHT_LIB_VERSION);
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DHTlib/examples/dht22_test/dht22_test.ino: In function 'void loop()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DHTlib/examples/dht22_test/dht22_test.ino:45:15: error: 'DHT' was not declared in this scope
int chk = DHT.read22(DHT22_PIN);
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DHTlib/examples/dht22_test/dht22_test.ino:51:10: error: 'DHTLIB_OK' was not declared in this scope
case DHTLIB_OK:
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DHTlib/examples/dht22_test/dht22_test.ino:55:10: error: 'DHTLIB_ERROR_CHECKSUM' was not declared in this scope
case DHTLIB_ERROR_CHECKSUM:
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DHTlib/examples/dht22_test/dht22_test.ino:59:10: error: 'DHTLIB_ERROR_TIMEOUT' was not declared in this scope
case DHTLIB_ERROR_TIMEOUT:
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DHTlib/examples/dht22_test/dht22_test.ino:63:10: error: 'DHTLIB_ERROR_CONNECT' was not declared in this scope
case DHTLIB_ERROR_CONNECT:
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DHTlib/examples/dht22_test/dht22_test.ino:67:10: error: 'DHTLIB_ERROR_ACK_L' was not declared in this scope
case DHTLIB_ERROR_ACK_L:
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DHTlib/examples/dht22_test/dht22_test.ino:71:10: error: 'DHTLIB_ERROR_ACK_H' was not declared in this scope
case DHTLIB_ERROR_ACK_H:
^
Multiple libraries were found for "dht.h"
Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/UncleRus
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DHTlib
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DHTlib/examples/dht22_test_noIRQ/dht22_test_noIRQ.ino:10:1: error: 'dht' does not name a type
dht DHT;
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DHTlib/examples/dht22_test_noIRQ/dht22_test_noIRQ.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DHTlib/examples/dht22_test_noIRQ/dht22_test_noIRQ.ino:35:20: error: 'DHT_LIB_VERSION' was not declared in this scope
Serial.println(DHT_LIB_VERSION);
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DHTlib/examples/dht22_test_noIRQ/dht22_test_noIRQ.ino:39:21: error: 'DHT' was not declared in this scope
Serial.println( DHT.getDisableIRQ() );
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DHTlib/examples/dht22_test_noIRQ/dht22_test_noIRQ.ino: In function 'void loop()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DHTlib/examples/dht22_test_noIRQ/dht22_test_noIRQ.ino:54:15: error: 'DHT' was not declared in this scope
int chk = DHT.read22(DHT22_PIN);
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DHTlib/examples/dht22_test_noIRQ/dht22_test_noIRQ.ino:60:10: error: 'DHTLIB_OK' was not declared in this scope
case DHTLIB_OK:
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DHTlib/examples/dht22_test_noIRQ/dht22_test_noIRQ.ino:64:10: error: 'DHTLIB_ERROR_CHECKSUM' was not declared in this scope
case DHTLIB_ERROR_CHECKSUM:
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DHTlib/examples/dht22_test_noIRQ/dht22_test_noIRQ.ino:68:10: error: 'DHTLIB_ERROR_TIMEOUT' was not declared in this scope
case DHTLIB_ERROR_TIMEOUT:
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DHTlib/examples/dht22_test_noIRQ/dht22_test_noIRQ.ino:72:10: error: 'DHTLIB_ERROR_CONNECT' was not declared in this scope
case DHTLIB_ERROR_CONNECT:
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DHTlib/examples/dht22_test_noIRQ/dht22_test_noIRQ.ino:76:10: error: 'DHTLIB_ERROR_ACK_L' was not declared in this scope
case DHTLIB_ERROR_ACK_L:
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DHTlib/examples/dht22_test_noIRQ/dht22_test_noIRQ.ino:80:10: error: 'DHTLIB_ERROR_ACK_H' was not declared in this scope
case DHTLIB_ERROR_ACK_H:
^
Multiple libraries were found for "dht.h"
Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/UncleRus
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DHTlib
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DHTlib/examples/dht33_test/dht33_test.ino:10:1: error: 'dht' does not name a type
dht DHT;
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DHTlib/examples/dht33_test/dht33_test.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DHTlib/examples/dht33_test/dht33_test.ino:20:20: error: 'DHT_LIB_VERSION' was not declared in this scope
Serial.println(DHT_LIB_VERSION);
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DHTlib/examples/dht33_test/dht33_test.ino: In function 'void loop()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DHTlib/examples/dht33_test/dht33_test.ino:32:15: error: 'DHT' was not declared in this scope
int chk = DHT.read33(DHT33_PIN);
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DHTlib/examples/dht33_test/dht33_test.ino:37:10: error: 'DHTLIB_OK' was not declared in this scope
case DHTLIB_OK:
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DHTlib/examples/dht33_test/dht33_test.ino:40:10: error: 'DHTLIB_ERROR_CHECKSUM' was not declared in this scope
case DHTLIB_ERROR_CHECKSUM:
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DHTlib/examples/dht33_test/dht33_test.ino:43:10: error: 'DHTLIB_ERROR_TIMEOUT' was not declared in this scope
case DHTLIB_ERROR_TIMEOUT:
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DHTlib/examples/dht33_test/dht33_test.ino:46:10: error: 'DHTLIB_ERROR_CONNECT' was not declared in this scope
case DHTLIB_ERROR_CONNECT:
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DHTlib/examples/dht33_test/dht33_test.ino:49:10: error: 'DHTLIB_ERROR_ACK_L' was not declared in this scope
case DHTLIB_ERROR_ACK_L:
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DHTlib/examples/dht33_test/dht33_test.ino:52:10: error: 'DHTLIB_ERROR_ACK_H' was not declared in this scope
case DHTLIB_ERROR_ACK_H:
^
Multiple libraries were found for "dht.h"
Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/UncleRus
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DHTlib
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DHTlib/examples/dht44_test/dht44_test.ino:10:1: error: 'dht' does not name a type
dht DHT;
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DHTlib/examples/dht44_test/dht44_test.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DHTlib/examples/dht44_test/dht44_test.ino:20:20: error: 'DHT_LIB_VERSION' was not declared in this scope
Serial.println(DHT_LIB_VERSION);
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DHTlib/examples/dht44_test/dht44_test.ino: In function 'void loop()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DHTlib/examples/dht44_test/dht44_test.ino:32:15: error: 'DHT' was not declared in this scope
int chk = DHT.read44(DHT44_PIN);
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DHTlib/examples/dht44_test/dht44_test.ino:37:10: error: 'DHTLIB_OK' was not declared in this scope
case DHTLIB_OK:
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DHTlib/examples/dht44_test/dht44_test.ino:40:10: error: 'DHTLIB_ERROR_CHECKSUM' was not declared in this scope
case DHTLIB_ERROR_CHECKSUM:
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DHTlib/examples/dht44_test/dht44_test.ino:43:10: error: 'DHTLIB_ERROR_TIMEOUT' was not declared in this scope
case DHTLIB_ERROR_TIMEOUT:
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DHTlib/examples/dht44_test/dht44_test.ino:46:10: error: 'DHTLIB_ERROR_CONNECT' was not declared in this scope
case DHTLIB_ERROR_CONNECT:
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DHTlib/examples/dht44_test/dht44_test.ino:49:10: error: 'DHTLIB_ERROR_ACK_L' was not declared in this scope
case DHTLIB_ERROR_ACK_L:
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DHTlib/examples/dht44_test/dht44_test.ino:52:10: error: 'DHTLIB_ERROR_ACK_H' was not declared in this scope
case DHTLIB_ERROR_ACK_H:
^
Multiple libraries were found for "dht.h"
Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/UncleRus
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DHTlib
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DHTlib/examples/dht_test1/dht_test1.ino:11:1: error: 'dht' does not name a type
dht DHT;
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DHTlib/examples/dht_test1/dht_test1.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DHTlib/examples/dht_test1/dht_test1.ino:23:18: error: 'DHT_LIB_VERSION' was not declared in this scope
Serial.println(DHT_LIB_VERSION);
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DHTlib/examples/dht_test1/dht_test1.ino: In function 'void loop()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DHTlib/examples/dht_test1/dht_test1.ino:33:13: error: 'DHT' was not declared in this scope
int chk = DHT.read22(DHT22_PIN);
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DHTlib/examples/dht_test1/dht_test1.ino:36:10: error: 'DHTLIB_OK' was not declared in this scope
case DHTLIB_OK:
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DHTlib/examples/dht_test1/dht_test1.ino:39:10: error: 'DHTLIB_ERROR_CHECKSUM' was not declared in this scope
case DHTLIB_ERROR_CHECKSUM:
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DHTlib/examples/dht_test1/dht_test1.ino:42:10: error: 'DHTLIB_ERROR_TIMEOUT' was not declared in this scope
case DHTLIB_ERROR_TIMEOUT:
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DHTlib/examples/dht_test1/dht_test1.ino:45:10: error: 'DHTLIB_ERROR_CONNECT' was not declared in this scope
case DHTLIB_ERROR_CONNECT:
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DHTlib/examples/dht_test1/dht_test1.ino:48:10: error: 'DHTLIB_ERROR_ACK_L' was not declared in this scope
case DHTLIB_ERROR_ACK_L:
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DHTlib/examples/dht_test1/dht_test1.ino:51:10: error: 'DHTLIB_ERROR_ACK_H' was not declared in this scope
case DHTLIB_ERROR_ACK_H:
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DHTlib/examples/dht_test1/dht_test1.ino:70:10: error: 'DHTLIB_OK' was not declared in this scope
case DHTLIB_OK:
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DHTlib/examples/dht_test1/dht_test1.ino:73:10: error: 'DHTLIB_ERROR_CHECKSUM' was not declared in this scope
case DHTLIB_ERROR_CHECKSUM:
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DHTlib/examples/dht_test1/dht_test1.ino:76:10: error: 'DHTLIB_ERROR_TIMEOUT' was not declared in this scope
case DHTLIB_ERROR_TIMEOUT:
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DHTlib/examples/dht_test1/dht_test1.ino:79:10: error: 'DHTLIB_ERROR_CONNECT' was not declared in this scope
case DHTLIB_ERROR_CONNECT:
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DHTlib/examples/dht_test1/dht_test1.ino:82:10: error: 'DHTLIB_ERROR_ACK_L' was not declared in this scope
case DHTLIB_ERROR_ACK_L:
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DHTlib/examples/dht_test1/dht_test1.ino:85:10: error: 'DHTLIB_ERROR_ACK_H' was not declared in this scope
case DHTLIB_ERROR_ACK_H:
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DHTlib/examples/dht_test1/dht_test1.ino:104:10: error: 'DHTLIB_OK' was not declared in this scope
case DHTLIB_OK:
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DHTlib/examples/dht_test1/dht_test1.ino:107:10: error: 'DHTLIB_ERROR_CHECKSUM' was not declared in this scope
case DHTLIB_ERROR_CHECKSUM:
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DHTlib/examples/dht_test1/dht_test1.ino:110:10: error: 'DHTLIB_ERROR_TIMEOUT' was not declared in this scope
case DHTLIB_ERROR_TIMEOUT:
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DHTlib/examples/dht_test1/dht_test1.ino:113:10: error: 'DHTLIB_ERROR_CONNECT' was not declared in this scope
case DHTLIB_ERROR_CONNECT:
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DHTlib/examples/dht_test1/dht_test1.ino:116:10: error: 'DHTLIB_ERROR_ACK_L' was not declared in this scope
case DHTLIB_ERROR_ACK_L:
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DHTlib/examples/dht_test1/dht_test1.ino:119:10: error: 'DHTLIB_ERROR_ACK_H' was not declared in this scope
case DHTLIB_ERROR_ACK_H:
^
Multiple libraries were found for "dht.h"
Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/UncleRus
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DHTlib
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DHTlib/examples/dht_tuning/dht_tuning.ino:10:1: error: 'dht' does not name a type
dht DHT;
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DHTlib/examples/dht_tuning/dht_tuning.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DHTlib/examples/dht_tuning/dht_tuning.ino:28:18: error: 'DHT_LIB_VERSION' was not declared in this scope
Serial.println(DHT_LIB_VERSION);
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DHTlib/examples/dht_tuning/dht_tuning.ino: In function 'void loop()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DHTlib/examples/dht_tuning/dht_tuning.ino:41:15: error: 'DHT' was not declared in this scope
int chk = DHT.read22(DHT22_PIN);
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DHTlib/examples/dht_tuning/dht_tuning.ino:46:10: error: 'DHTLIB_OK' was not declared in this scope
case DHTLIB_OK:
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DHTlib/examples/dht_tuning/dht_tuning.ino:50:10: error: 'DHTLIB_ERROR_CHECKSUM' was not declared in this scope
case DHTLIB_ERROR_CHECKSUM:
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DHTlib/examples/dht_tuning/dht_tuning.ino:53:10: error: 'DHTLIB_ERROR_TIMEOUT' was not declared in this scope
case DHTLIB_ERROR_TIMEOUT:
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DHTlib/examples/dht_tuning/dht_tuning.ino:57:10: error: 'DHTLIB_ERROR_CONNECT' was not declared in this scope
case DHTLIB_ERROR_CONNECT:
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DHTlib/examples/dht_tuning/dht_tuning.ino:60:10: error: 'DHTLIB_ERROR_ACK_L' was not declared in this scope
case DHTLIB_ERROR_ACK_L:
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DHTlib/examples/dht_tuning/dht_tuning.ino:63:10: error: 'DHTLIB_ERROR_ACK_H' was not declared in this scope
case DHTLIB_ERROR_ACK_H:
^
Multiple libraries were found for "dht.h"
Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/UncleRus
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DHTlib