DIO2 - compatibility matrix

This report was generated on Wednesday, 23-Feb-22 22:48:15 CET using arduino-testlib.

DIO2

Version: 1.6.0
More details

Compatibility matrix

Board	Claims compatibility	Inclusion	blink2	blink2_native	leonardo_outputs	mega_inputs	mega_speed	standard_inputs	mega_outputs	micro_outputs	standard_outputs	standard_speed
arduino:avr:uno 1.8.4	Yes	PASS	PASS	PASS	PASS	PASS	PASS	PASS	PASS	PASS	PASS	PASS
arduino:mbed_nano:nanorp2040connect 2.7.2	No ⚠️	PASS	PASS	FAIL	PASS	PASS	FAIL	PASS	PASS	PASS	PASS	FAIL
arduino:megaavr:nona4809 1.8.7	No ⚠️	PASS	PASS	FAIL	PASS	PASS	FAIL	PASS	PASS	PASS	PASS	FAIL
arduino:samd:mkrwifi1010 1.8.12	No ⚠️	PASS	PASS	FAIL	PASS	PASS	FAIL	PASS	PASS	PASS	PASS	FAIL
esp32:esp32:d1_mini32 1.0.6	Yes	PASS	PASS	FAIL	PASS	PASS	FAIL	PASS	PASS	PASS	PASS	FAIL

Compilation logs

arduino:avr:uno @ 1.8.4

Inclusion

Result: PASS

Sketch uses 444 bytes (1%) of program storage space. Maximum is 32256 bytes.
Global variables use 9 bytes (0%) of dynamic memory, leaving 2039 bytes for local variables. Maximum is 2048 bytes.

examples/blink2

Result: PASS

Sketch uses 750 bytes (2%) of program storage space. Maximum is 32256 bytes.
Global variables use 9 bytes (0%) of dynamic memory, leaving 2039 bytes for local variables. Maximum is 2048 bytes.

examples/blink2_native

Result: PASS

Sketch uses 640 bytes (1%) of program storage space. Maximum is 32256 bytes.
Global variables use 9 bytes (0%) of dynamic memory, leaving 2039 bytes for local variables. Maximum is 2048 bytes.

examples/leonardo_outputs

Result: PASS

Sketch uses 796 bytes (2%) of program storage space. Maximum is 32256 bytes.
Global variables use 9 bytes (0%) of dynamic memory, leaving 2039 bytes for local variables. Maximum is 2048 bytes.

examples/mega_inputs

Result: PASS

Sketch uses 1998 bytes (6%) of program storage space. Maximum is 32256 bytes.
Global variables use 198 bytes (9%) of dynamic memory, leaving 1850 bytes for local variables. Maximum is 2048 bytes.

examples/mega_outputs

Result: PASS

Sketch uses 816 bytes (2%) of program storage space. Maximum is 32256 bytes.
Global variables use 9 bytes (0%) of dynamic memory, leaving 2039 bytes for local variables. Maximum is 2048 bytes.

examples/mega_speed

Result: PASS

Sketch uses 2084 bytes (6%) of program storage space. Maximum is 32256 bytes.
Global variables use 238 bytes (11%) of dynamic memory, leaving 1810 bytes for local variables. Maximum is 2048 bytes.

examples/micro_outputs

Result: PASS

Sketch uses 780 bytes (2%) of program storage space. Maximum is 32256 bytes.
Global variables use 9 bytes (0%) of dynamic memory, leaving 2039 bytes for local variables. Maximum is 2048 bytes.

examples/standard_inputs

Result: PASS

Sketch uses 2014 bytes (6%) of program storage space. Maximum is 32256 bytes.
Global variables use 198 bytes (9%) of dynamic memory, leaving 1850 bytes for local variables. Maximum is 2048 bytes.

examples/standard_outputs

Result: PASS

Sketch uses 772 bytes (2%) of program storage space. Maximum is 32256 bytes.
Global variables use 9 bytes (0%) of dynamic memory, leaving 2039 bytes for local variables. Maximum is 2048 bytes.

examples/standard_speed

Result: PASS

Sketch uses 2296 bytes (7%) of program storage space. Maximum is 32256 bytes.
Global variables use 238 bytes (11%) of dynamic memory, leaving 1810 bytes for local variables. Maximum is 2048 bytes.

arduino:mbed_nano:nanorp2040connect @ 2.7.2

Inclusion

Result: PASS

WARNING: library DIO2 claims to run on avr, sam, esp32, STM32F1, rp2040 architecture(s) and may be incompatible with your current board which runs on mbed_nano architecture(s).
Sketch uses 78756 bytes (0%) of program storage space. Maximum is 16777216 bytes.
Global variables use 43444 bytes (16%) of dynamic memory, leaving 226892 bytes for local variables. Maximum is 270336 bytes.

examples/blink2

Result: PASS

WARNING: library DIO2 claims to run on avr, sam, esp32, STM32F1, rp2040 architecture(s) and may be incompatible with your current board which runs on mbed_nano architecture(s).
Sketch uses 79132 bytes (0%) of program storage space. Maximum is 16777216 bytes.
Global variables use 43444 bytes (16%) of dynamic memory, leaving 226892 bytes for local variables. Maximum is 270336 bytes.

examples/blink2_native

Result: FAIL

WARNING: library DIO2 claims to run on avr, sam, esp32, STM32F1, rp2040 architecture(s) and may be incompatible with your current board which runs on mbed_nano architecture(s).
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DIO2/examples/blink2_native/blink2_native.ino:9:28: error: 'DP13' was not declared in this scope
 const GPIO_pin_t led_pin = DP13;
                            ^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DIO2/examples/blink2_native/blink2_native.ino:9:28: note: suggested alternative: 'DP1'
 const GPIO_pin_t led_pin = DP13;
                            ^~~~
                            DP1

examples/leonardo_outputs

Result: PASS

WARNING: library DIO2 claims to run on avr, sam, esp32, STM32F1, rp2040 architecture(s) and may be incompatible with your current board which runs on mbed_nano architecture(s).
Sketch uses 79168 bytes (0%) of program storage space. Maximum is 16777216 bytes.
Global variables use 43444 bytes (16%) of dynamic memory, leaving 226892 bytes for local variables. Maximum is 270336 bytes.

examples/mega_inputs

Result: PASS

WARNING: library DIO2 claims to run on avr, sam, esp32, STM32F1, rp2040 architecture(s) and may be incompatible with your current board which runs on mbed_nano architecture(s).
Sketch uses 79248 bytes (0%) of program storage space. Maximum is 16777216 bytes.
Global variables use 43444 bytes (16%) of dynamic memory, leaving 226892 bytes for local variables. Maximum is 270336 bytes.

examples/mega_outputs

Result: PASS

WARNING: library DIO2 claims to run on avr, sam, esp32, STM32F1, rp2040 architecture(s) and may be incompatible with your current board which runs on mbed_nano architecture(s).
Sketch uses 79168 bytes (0%) of program storage space. Maximum is 16777216 bytes.
Global variables use 43444 bytes (16%) of dynamic memory, leaving 226892 bytes for local variables. Maximum is 270336 bytes.

examples/mega_speed

Result: FAIL

WARNING: library DIO2 claims to run on avr, sam, esp32, STM32F1, rp2040 architecture(s) and may be incompatible with your current board which runs on mbed_nano architecture(s).
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DIO2/examples/mega_speed/mega_speed.ino:20:22: error: 'DP13' was not declared in this scope
 GPIO_pin_t led_pin = DP13;
                      ^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DIO2/examples/mega_speed/mega_speed.ino:20:22: note: suggested alternative: 'DP1'
 GPIO_pin_t led_pin = DP13;
                      ^~~~
                      DP1

examples/micro_outputs

Result: PASS

WARNING: library DIO2 claims to run on avr, sam, esp32, STM32F1, rp2040 architecture(s) and may be incompatible with your current board which runs on mbed_nano architecture(s).
Sketch uses 79168 bytes (0%) of program storage space. Maximum is 16777216 bytes.
Global variables use 43444 bytes (16%) of dynamic memory, leaving 226892 bytes for local variables. Maximum is 270336 bytes.

examples/standard_inputs

Result: PASS

WARNING: library DIO2 claims to run on avr, sam, esp32, STM32F1, rp2040 architecture(s) and may be incompatible with your current board which runs on mbed_nano architecture(s).
Sketch uses 79248 bytes (0%) of program storage space. Maximum is 16777216 bytes.
Global variables use 43444 bytes (16%) of dynamic memory, leaving 226892 bytes for local variables. Maximum is 270336 bytes.

examples/standard_outputs

Result: PASS

WARNING: library DIO2 claims to run on avr, sam, esp32, STM32F1, rp2040 architecture(s) and may be incompatible with your current board which runs on mbed_nano architecture(s).
Sketch uses 79168 bytes (0%) of program storage space. Maximum is 16777216 bytes.
Global variables use 43444 bytes (16%) of dynamic memory, leaving 226892 bytes for local variables. Maximum is 270336 bytes.

examples/standard_speed

Result: FAIL

WARNING: library DIO2 claims to run on avr, sam, esp32, STM32F1, rp2040 architecture(s) and may be incompatible with your current board which runs on mbed_nano architecture(s).
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DIO2/examples/standard_speed/standard_speed.ino:20:22: error: 'DP13' was not declared in this scope
 GPIO_pin_t led_pin = DP13;
                      ^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DIO2/examples/standard_speed/standard_speed.ino:20:22: note: suggested alternative: 'DP1'
 GPIO_pin_t led_pin = DP13;
                      ^~~~
                      DP1

arduino:megaavr:nona4809 @ 1.8.7

Inclusion

Result: PASS

WARNING: library DIO2 claims to run on avr, sam, esp32, STM32F1, rp2040 architecture(s) and may be incompatible with your current board which runs on megaavr architecture(s).
Sketch uses 802 bytes (1%) of program storage space. Maximum is 49152 bytes.
Global variables use 22 bytes (0%) of dynamic memory, leaving 6122 bytes for local variables. Maximum is 6144 bytes.

examples/blink2

Result: PASS

WARNING: library DIO2 claims to run on avr, sam, esp32, STM32F1, rp2040 architecture(s) and may be incompatible with your current board which runs on megaavr architecture(s).
Sketch uses 1118 bytes (2%) of program storage space. Maximum is 49152 bytes.
Global variables use 22 bytes (0%) of dynamic memory, leaving 6122 bytes for local variables. Maximum is 6144 bytes.

examples/blink2_native

Result: FAIL

WARNING: library DIO2 claims to run on avr, sam, esp32, STM32F1, rp2040 architecture(s) and may be incompatible with your current board which runs on megaavr architecture(s).
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DIO2/examples/blink2_native/blink2_native.ino:9:28: error: 'DP13' was not declared in this scope
 const GPIO_pin_t led_pin = DP13;
                            ^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DIO2/examples/blink2_native/blink2_native.ino:9:28: note: suggested alternative: 'DP1'
 const GPIO_pin_t led_pin = DP13;
                            ^~~~
                            DP1

examples/leonardo_outputs

Result: PASS

WARNING: library DIO2 claims to run on avr, sam, esp32, STM32F1, rp2040 architecture(s) and may be incompatible with your current board which runs on megaavr architecture(s).
Sketch uses 1390 bytes (2%) of program storage space. Maximum is 49152 bytes.
Global variables use 22 bytes (0%) of dynamic memory, leaving 6122 bytes for local variables. Maximum is 6144 bytes.

examples/mega_inputs

Result: PASS

WARNING: library DIO2 claims to run on avr, sam, esp32, STM32F1, rp2040 architecture(s) and may be incompatible with your current board which runs on megaavr architecture(s).
Sketch uses 3077 bytes (6%) of program storage space. Maximum is 49152 bytes.
Global variables use 177 bytes (2%) of dynamic memory, leaving 5967 bytes for local variables. Maximum is 6144 bytes.

examples/mega_outputs

Result: PASS

WARNING: library DIO2 claims to run on avr, sam, esp32, STM32F1, rp2040 architecture(s) and may be incompatible with your current board which runs on megaavr architecture(s).
Sketch uses 1410 bytes (2%) of program storage space. Maximum is 49152 bytes.
Global variables use 22 bytes (0%) of dynamic memory, leaving 6122 bytes for local variables. Maximum is 6144 bytes.

examples/mega_speed

Result: FAIL

WARNING: library DIO2 claims to run on avr, sam, esp32, STM32F1, rp2040 architecture(s) and may be incompatible with your current board which runs on megaavr architecture(s).
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DIO2/examples/mega_speed/mega_speed.ino:20:22: error: 'DP13' was not declared in this scope
 GPIO_pin_t led_pin = DP13;
                      ^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DIO2/examples/mega_speed/mega_speed.ino:20:22: note: suggested alternative: 'DP1'
 GPIO_pin_t led_pin = DP13;
                      ^~~~
                      DP1

examples/micro_outputs

Result: PASS

WARNING: library DIO2 claims to run on avr, sam, esp32, STM32F1, rp2040 architecture(s) and may be incompatible with your current board which runs on megaavr architecture(s).
Sketch uses 1418 bytes (2%) of program storage space. Maximum is 49152 bytes.
Global variables use 22 bytes (0%) of dynamic memory, leaving 6122 bytes for local variables. Maximum is 6144 bytes.

examples/standard_inputs

Result: PASS

WARNING: library DIO2 claims to run on avr, sam, esp32, STM32F1, rp2040 architecture(s) and may be incompatible with your current board which runs on megaavr architecture(s).
Sketch uses 3087 bytes (6%) of program storage space. Maximum is 49152 bytes.
Global variables use 177 bytes (2%) of dynamic memory, leaving 5967 bytes for local variables. Maximum is 6144 bytes.

examples/standard_outputs

Result: PASS

WARNING: library DIO2 claims to run on avr, sam, esp32, STM32F1, rp2040 architecture(s) and may be incompatible with your current board which runs on megaavr architecture(s).
Sketch uses 1390 bytes (2%) of program storage space. Maximum is 49152 bytes.
Global variables use 22 bytes (0%) of dynamic memory, leaving 6122 bytes for local variables. Maximum is 6144 bytes.

examples/standard_speed

Result: FAIL

WARNING: library DIO2 claims to run on avr, sam, esp32, STM32F1, rp2040 architecture(s) and may be incompatible with your current board which runs on megaavr architecture(s).
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DIO2/examples/standard_speed/standard_speed.ino:20:22: error: 'DP13' was not declared in this scope
 GPIO_pin_t led_pin = DP13;
                      ^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DIO2/examples/standard_speed/standard_speed.ino:20:22: note: suggested alternative: 'DP1'
 GPIO_pin_t led_pin = DP13;
                      ^~~~
                      DP1

arduino:samd:mkrwifi1010 @ 1.8.12

Inclusion

Result: PASS

WARNING: library DIO2 claims to run on avr, sam, esp32, STM32F1, rp2040 architecture(s) and may be incompatible with your current board which runs on samd architecture(s).
Sketch uses 12156 bytes (4%) of program storage space. Maximum is 262144 bytes.
Global variables use 2996 bytes (9%) of dynamic memory, leaving 29772 bytes for local variables. Maximum is 32768 bytes.

examples/blink2

Result: PASS

WARNING: library DIO2 claims to run on avr, sam, esp32, STM32F1, rp2040 architecture(s) and may be incompatible with your current board which runs on samd architecture(s).
Sketch uses 12200 bytes (4%) of program storage space. Maximum is 262144 bytes.
Global variables use 2996 bytes (9%) of dynamic memory, leaving 29772 bytes for local variables. Maximum is 32768 bytes.

examples/blink2_native

Result: FAIL

WARNING: library DIO2 claims to run on avr, sam, esp32, STM32F1, rp2040 architecture(s) and may be incompatible with your current board which runs on samd architecture(s).
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DIO2/examples/blink2_native/blink2_native.ino:9:28: error: 'DP13' was not declared in this scope
 const GPIO_pin_t led_pin = DP13;
                            ^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DIO2/examples/blink2_native/blink2_native.ino:9:28: note: suggested alternative: 'DP1'
 const GPIO_pin_t led_pin = DP13;
                            ^~~~
                            DP1

examples/leonardo_outputs

Result: PASS

WARNING: library DIO2 claims to run on avr, sam, esp32, STM32F1, rp2040 architecture(s) and may be incompatible with your current board which runs on samd architecture(s).
Sketch uses 12236 bytes (4%) of program storage space. Maximum is 262144 bytes.
Global variables use 2996 bytes (9%) of dynamic memory, leaving 29772 bytes for local variables. Maximum is 32768 bytes.

examples/mega_inputs

Result: PASS

WARNING: library DIO2 claims to run on avr, sam, esp32, STM32F1, rp2040 architecture(s) and may be incompatible with your current board which runs on samd architecture(s).
Sketch uses 12520 bytes (4%) of program storage space. Maximum is 262144 bytes.
Global variables use 2996 bytes (9%) of dynamic memory, leaving 29772 bytes for local variables. Maximum is 32768 bytes.

examples/mega_outputs

Result: PASS

WARNING: library DIO2 claims to run on avr, sam, esp32, STM32F1, rp2040 architecture(s) and may be incompatible with your current board which runs on samd architecture(s).
Sketch uses 12236 bytes (4%) of program storage space. Maximum is 262144 bytes.
Global variables use 2996 bytes (9%) of dynamic memory, leaving 29772 bytes for local variables. Maximum is 32768 bytes.

examples/mega_speed

Result: FAIL

WARNING: library DIO2 claims to run on avr, sam, esp32, STM32F1, rp2040 architecture(s) and may be incompatible with your current board which runs on samd architecture(s).
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DIO2/examples/mega_speed/mega_speed.ino:20:22: error: 'DP13' was not declared in this scope
 GPIO_pin_t led_pin = DP13;
                      ^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DIO2/examples/mega_speed/mega_speed.ino:20:22: note: suggested alternative: 'DP1'
 GPIO_pin_t led_pin = DP13;
                      ^~~~
                      DP1

examples/micro_outputs

Result: PASS

WARNING: library DIO2 claims to run on avr, sam, esp32, STM32F1, rp2040 architecture(s) and may be incompatible with your current board which runs on samd architecture(s).
Sketch uses 12236 bytes (4%) of program storage space. Maximum is 262144 bytes.
Global variables use 2996 bytes (9%) of dynamic memory, leaving 29772 bytes for local variables. Maximum is 32768 bytes.

examples/standard_inputs

Result: PASS

WARNING: library DIO2 claims to run on avr, sam, esp32, STM32F1, rp2040 architecture(s) and may be incompatible with your current board which runs on samd architecture(s).
Sketch uses 12520 bytes (4%) of program storage space. Maximum is 262144 bytes.
Global variables use 2996 bytes (9%) of dynamic memory, leaving 29772 bytes for local variables. Maximum is 32768 bytes.

examples/standard_outputs

Result: PASS

WARNING: library DIO2 claims to run on avr, sam, esp32, STM32F1, rp2040 architecture(s) and may be incompatible with your current board which runs on samd architecture(s).
Sketch uses 12236 bytes (4%) of program storage space. Maximum is 262144 bytes.
Global variables use 2996 bytes (9%) of dynamic memory, leaving 29772 bytes for local variables. Maximum is 32768 bytes.

examples/standard_speed

Result: FAIL

WARNING: library DIO2 claims to run on avr, sam, esp32, STM32F1, rp2040 architecture(s) and may be incompatible with your current board which runs on samd architecture(s).
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DIO2/examples/standard_speed/standard_speed.ino:20:22: error: 'DP13' was not declared in this scope
 GPIO_pin_t led_pin = DP13;
                      ^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DIO2/examples/standard_speed/standard_speed.ino:20:22: note: suggested alternative: 'DP1'
 GPIO_pin_t led_pin = DP13;
                      ^~~~
                      DP1

esp32:esp32:d1_mini32 @ 1.0.6

Inclusion

Result: PASS

Sketch uses 197736 bytes (15%) of program storage space. Maximum is 1310720 bytes.
Global variables use 13084 bytes (3%) of dynamic memory, leaving 314596 bytes for local variables. Maximum is 327680 bytes.

examples/blink2

Result: PASS

Sketch uses 198834 bytes (15%) of program storage space. Maximum is 1310720 bytes.
Global variables use 13248 bytes (4%) of dynamic memory, leaving 314432 bytes for local variables. Maximum is 327680 bytes.

examples/blink2_native

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DIO2/examples/blink2_native/blink2_native.ino:9:28: error: 'DP13' was not declared in this scope
 const GPIO_pin_t led_pin = DP13;
                            ^

examples/leonardo_outputs

Result: PASS

Sketch uses 198898 bytes (15%) of program storage space. Maximum is 1310720 bytes.
Global variables use 13248 bytes (4%) of dynamic memory, leaving 314432 bytes for local variables. Maximum is 327680 bytes.

examples/mega_inputs

Result: PASS

Sketch uses 204690 bytes (15%) of program storage space. Maximum is 1310720 bytes.
Global variables use 13416 bytes (4%) of dynamic memory, leaving 314264 bytes for local variables. Maximum is 327680 bytes.

examples/mega_outputs

Result: PASS

Sketch uses 198898 bytes (15%) of program storage space. Maximum is 1310720 bytes.
Global variables use 13248 bytes (4%) of dynamic memory, leaving 314432 bytes for local variables. Maximum is 327680 bytes.

examples/mega_speed

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DIO2/examples/mega_speed/mega_speed.ino:20:22: error: 'DP13' was not declared in this scope
 GPIO_pin_t led_pin = DP13;
                      ^

examples/micro_outputs

Result: PASS

Sketch uses 198898 bytes (15%) of program storage space. Maximum is 1310720 bytes.
Global variables use 13248 bytes (4%) of dynamic memory, leaving 314432 bytes for local variables. Maximum is 327680 bytes.

examples/standard_inputs

Result: PASS

Sketch uses 204690 bytes (15%) of program storage space. Maximum is 1310720 bytes.
Global variables use 13416 bytes (4%) of dynamic memory, leaving 314264 bytes for local variables. Maximum is 327680 bytes.

examples/standard_outputs

Result: PASS

Sketch uses 198898 bytes (15%) of program storage space. Maximum is 1310720 bytes.
Global variables use 13248 bytes (4%) of dynamic memory, leaving 314432 bytes for local variables. Maximum is 327680 bytes.

examples/standard_speed

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DIO2/examples/standard_speed/standard_speed.ino:20:22: error: 'DP13' was not declared in this scope
 GPIO_pin_t led_pin = DP13;
                      ^