DMD32 - compatibility matrix

This report was generated on Wednesday, 23-Feb-22 22:48:15 CET using arduino-testlib.

DMD32

Compatibility matrix

Board	Claims compatibility	Inclusion	dmd_demo	dmd_latin_chars	dmd_clock_readout
arduino:avr:uno 1.8.4	No	FAIL	FAIL	FAIL	FAIL
arduino:mbed_nano:nanorp2040connect 2.7.2	No	FAIL	FAIL	FAIL	FAIL
arduino:megaavr:nona4809 1.8.7	No	FAIL	FAIL	FAIL	FAIL
arduino:samd:mkrwifi1010 1.8.12	No	FAIL	FAIL	FAIL	FAIL
esp32:esp32:d1_mini32 1.0.6	Yes	PASS	PASS	PASS	PASS

Compilation logs

arduino:avr:uno @ 1.8.4

Inclusion

Result: FAIL

WARNING: library DMD32 claims to run on esp32 architecture(s) and may be incompatible with your current board which runs on avr architecture(s).
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DMD32/DMD32.cpp: In constructor 'DMD::DMD(byte, byte)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DMD32/DMD32.cpp:51:22: error: 'VSPI' was not declared in this scope
  vspi = new SPIClass(VSPI);
                      ^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DMD32/DMD32.cpp:51:22: note: suggested alternative: 'SPI'
  vspi = new SPIClass(VSPI);
                      ^~~~
                      SPI

examples/dmd_clock_readout

Result: FAIL

WARNING: library DMD32 claims to run on esp32 architecture(s) and may be incompatible with your current board which runs on avr architecture(s).
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DMD32/examples/dmd_clock_readout/dmd_clock_readout.ino:46:3: error: 'hw_timer_t' does not name a type; did you mean '__size_t'?
   hw_timer_t * timer = NULL;
   ^~~~~~~~~~
   __size_t
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DMD32/examples/dmd_clock_readout/dmd_clock_readout.ino:52:16: error: expected initializer before 'triggerScan'
 void IRAM_ATTR triggerScan()
                ^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DMD32/examples/dmd_clock_readout/dmd_clock_readout.ino:52:16: error: expected initializer before 'triggerScan'
 void IRAM_ATTR triggerScan()
                ^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DMD32/examples/dmd_clock_readout/dmd_clock_readout.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DMD32/examples/dmd_clock_readout/dmd_clock_readout.ino:82:22: error: 'ESP' was not declared in this scope
   uint8_t cpuClock = ESP.getCpuFreqMHz();
                      ^~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DMD32/examples/dmd_clock_readout/dmd_clock_readout.ino:82:22: note: suggested alternative: 'SP'
   uint8_t cpuClock = ESP.getCpuFreqMHz();
                      ^~~
                      SP
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DMD32/examples/dmd_clock_readout/dmd_clock_readout.ino:86:3: error: 'timer' was not declared in this scope
   timer = timerBegin(0, cpuClock, true);
   ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DMD32/examples/dmd_clock_readout/dmd_clock_readout.ino:86:11: error: 'timerBegin' was not declared in this scope
   timer = timerBegin(0, cpuClock, true);
           ^~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DMD32/examples/dmd_clock_readout/dmd_clock_readout.ino:88:32: error: 'triggerScan' was not declared in this scope
   timerAttachInterrupt(timer, &triggerScan, true);
                                ^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DMD32/examples/dmd_clock_readout/dmd_clock_readout.ino:88:3: error: 'timerAttachInterrupt' was not declared in this scope
   timerAttachInterrupt(timer, &triggerScan, true);
   ^~~~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DMD32/examples/dmd_clock_readout/dmd_clock_readout.ino:88:3: note: suggested alternative: 'detachInterrupt'
   timerAttachInterrupt(timer, &triggerScan, true);
   ^~~~~~~~~~~~~~~~~~~~
   detachInterrupt
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DMD32/examples/dmd_clock_readout/dmd_clock_readout.ino:91:3: error: 'timerAlarmWrite' was not declared in this scope
   timerAlarmWrite(timer, 300, true);
   ^~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DMD32/examples/dmd_clock_readout/dmd_clock_readout.ino:94:3: error: 'timerAlarmEnable' was not declared in this scope
   timerAlarmEnable(timer);
   ^~~~~~~~~~~~~~~~

examples/dmd_demo

Result: FAIL

WARNING: library DMD32 claims to run on esp32 architecture(s) and may be incompatible with your current board which runs on avr architecture(s).
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DMD32/examples/dmd_demo/dmd_demo.ino:48:3: error: 'hw_timer_t' does not name a type; did you mean '__size_t'?
   hw_timer_t * timer = NULL;
   ^~~~~~~~~~
   __size_t
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DMD32/examples/dmd_demo/dmd_demo.ino:54:16: error: expected initializer before 'triggerScan'
 void IRAM_ATTR triggerScan()
                ^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DMD32/examples/dmd_demo/dmd_demo.ino:54:16: error: expected initializer before 'triggerScan'
 void IRAM_ATTR triggerScan()
                ^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DMD32/examples/dmd_demo/dmd_demo.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DMD32/examples/dmd_demo/dmd_demo.ino:67:22: error: 'ESP' was not declared in this scope
   uint8_t cpuClock = ESP.getCpuFreqMHz();
                      ^~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DMD32/examples/dmd_demo/dmd_demo.ino:67:22: note: suggested alternative: 'SP'
   uint8_t cpuClock = ESP.getCpuFreqMHz();
                      ^~~
                      SP
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DMD32/examples/dmd_demo/dmd_demo.ino:71:3: error: 'timer' was not declared in this scope
   timer = timerBegin(0, cpuClock, true);
   ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DMD32/examples/dmd_demo/dmd_demo.ino:71:11: error: 'timerBegin' was not declared in this scope
   timer = timerBegin(0, cpuClock, true);
           ^~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DMD32/examples/dmd_demo/dmd_demo.ino:73:32: error: 'triggerScan' was not declared in this scope
   timerAttachInterrupt(timer, &triggerScan, true);
                                ^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DMD32/examples/dmd_demo/dmd_demo.ino:73:3: error: 'timerAttachInterrupt' was not declared in this scope
   timerAttachInterrupt(timer, &triggerScan, true);
   ^~~~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DMD32/examples/dmd_demo/dmd_demo.ino:73:3: note: suggested alternative: 'detachInterrupt'
   timerAttachInterrupt(timer, &triggerScan, true);
   ^~~~~~~~~~~~~~~~~~~~
   detachInterrupt
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DMD32/examples/dmd_demo/dmd_demo.ino:76:3: error: 'timerAlarmWrite' was not declared in this scope
   timerAlarmWrite(timer, 300, true);
   ^~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DMD32/examples/dmd_demo/dmd_demo.ino:79:3: error: 'timerAlarmEnable' was not declared in this scope
   timerAlarmEnable(timer);
   ^~~~~~~~~~~~~~~~

examples/dmd_latin_chars

Result: FAIL

WARNING: library DMD32 claims to run on esp32 architecture(s) and may be incompatible with your current board which runs on avr architecture(s).
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DMD32/examples/dmd_latin_chars/dmd_latin_chars.ino:57:3: error: 'hw_timer_t' does not name a type; did you mean '__size_t'?
   hw_timer_t * timer = NULL;
   ^~~~~~~~~~
   __size_t
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DMD32/examples/dmd_latin_chars/dmd_latin_chars.ino:63:16: error: expected initializer before 'triggerScan'
 void IRAM_ATTR triggerScan()
                ^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DMD32/examples/dmd_latin_chars/dmd_latin_chars.ino:63:16: error: expected initializer before 'triggerScan'
 void IRAM_ATTR triggerScan()
                ^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DMD32/examples/dmd_latin_chars/dmd_latin_chars.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DMD32/examples/dmd_latin_chars/dmd_latin_chars.ino:77:22: error: 'ESP' was not declared in this scope
   uint8_t cpuClock = ESP.getCpuFreqMHz();
                      ^~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DMD32/examples/dmd_latin_chars/dmd_latin_chars.ino:77:22: note: suggested alternative: 'SP'
   uint8_t cpuClock = ESP.getCpuFreqMHz();
                      ^~~
                      SP
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DMD32/examples/dmd_latin_chars/dmd_latin_chars.ino:81:3: error: 'timer' was not declared in this scope
   timer = timerBegin(0, cpuClock, true);
   ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DMD32/examples/dmd_latin_chars/dmd_latin_chars.ino:81:11: error: 'timerBegin' was not declared in this scope
   timer = timerBegin(0, cpuClock, true);
           ^~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DMD32/examples/dmd_latin_chars/dmd_latin_chars.ino:83:32: error: 'triggerScan' was not declared in this scope
   timerAttachInterrupt(timer, &triggerScan, true);
                                ^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DMD32/examples/dmd_latin_chars/dmd_latin_chars.ino:83:3: error: 'timerAttachInterrupt' was not declared in this scope
   timerAttachInterrupt(timer, &triggerScan, true);
   ^~~~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DMD32/examples/dmd_latin_chars/dmd_latin_chars.ino:83:3: note: suggested alternative: 'detachInterrupt'
   timerAttachInterrupt(timer, &triggerScan, true);
   ^~~~~~~~~~~~~~~~~~~~
   detachInterrupt
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DMD32/examples/dmd_latin_chars/dmd_latin_chars.ino:86:3: error: 'timerAlarmWrite' was not declared in this scope
   timerAlarmWrite(timer, 300, true);
   ^~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DMD32/examples/dmd_latin_chars/dmd_latin_chars.ino:89:3: error: 'timerAlarmEnable' was not declared in this scope
   timerAlarmEnable(timer);
   ^~~~~~~~~~~~~~~~

arduino:mbed_nano:nanorp2040connect @ 2.7.2

Inclusion

Result: FAIL

WARNING: library DMD32 claims to run on esp32 architecture(s) and may be incompatible with your current board which runs on mbed_nano architecture(s).
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DMD32/DMD32.cpp: In constructor 'DMD::DMD(byte, byte)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DMD32/DMD32.cpp:51:22: error: 'VSPI' was not declared in this scope
  vspi = new SPIClass(VSPI);
                      ^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DMD32/DMD32.cpp:51:22: note: suggested alternative: 'SPI'
  vspi = new SPIClass(VSPI);
                      ^~~~
                      SPI
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DMD32/DMD32.cpp:51:26: error: invalid new-expression of abstract class type 'arduino::HardwareSPI'
  vspi = new SPIClass(VSPI);
                          ^
In file included from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/libraries/SPI/SPI.h:22:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DMD32/DMD32.h:45,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DMD32/DMD32.cpp:28:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/cores/arduino/api/HardwareSPI.h:104:7: note:   because the following virtual functions are pure within 'arduino::HardwareSPI':
 class HardwareSPI
       ^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/cores/arduino/api/HardwareSPI.h:109:21: note: 	virtual uint8_t arduino::HardwareSPI::transfer(uint8_t)
     virtual uint8_t transfer(uint8_t data) = 0;
                     ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/cores/arduino/api/HardwareSPI.h:110:22: note: 	virtual uint16_t arduino::HardwareSPI::transfer16(uint16_t)
     virtual uint16_t transfer16(uint16_t data) = 0;
                      ^~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/cores/arduino/api/HardwareSPI.h:111:18: note: 	virtual void arduino::HardwareSPI::transfer(void*, size_t)
     virtual void transfer(void *buf, size_t count) = 0;
                  ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/cores/arduino/api/HardwareSPI.h:114:18: note: 	virtual void arduino::HardwareSPI::usingInterrupt(int)
     virtual void usingInterrupt(int interruptNumber) = 0;
                  ^~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/cores/arduino/api/HardwareSPI.h:115:18: note: 	virtual void arduino::HardwareSPI::notUsingInterrupt(int)
     virtual void notUsingInterrupt(int interruptNumber) = 0;
                  ^~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/cores/arduino/api/HardwareSPI.h:116:18: note: 	virtual void arduino::HardwareSPI::beginTransaction(arduino::SPISettings)
     virtual void beginTransaction(SPISettings settings) = 0;
                  ^~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/cores/arduino/api/HardwareSPI.h:117:18: note: 	virtual void arduino::HardwareSPI::endTransaction()
     virtual void endTransaction(void) = 0;
                  ^~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/cores/arduino/api/HardwareSPI.h:120:18: note: 	virtual void arduino::HardwareSPI::attachInterrupt()
     virtual void attachInterrupt() = 0;
                  ^~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/cores/arduino/api/HardwareSPI.h:121:18: note: 	virtual void arduino::HardwareSPI::detachInterrupt()
     virtual void detachInterrupt() = 0;
                  ^~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/cores/arduino/api/HardwareSPI.h:123:18: note: 	virtual void arduino::HardwareSPI::begin()
     virtual void begin() = 0;
                  ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/cores/arduino/api/HardwareSPI.h:124:18: note: 	virtual void arduino::HardwareSPI::end()
     virtual void end() = 0;
                  ^~~

examples/dmd_clock_readout

Result: FAIL

WARNING: library DMD32 claims to run on esp32 architecture(s) and may be incompatible with your current board which runs on mbed_nano architecture(s).
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DMD32/examples/dmd_clock_readout/dmd_clock_readout.ino:46:3: error: 'hw_timer_t' does not name a type; did you mean '__timer_t'?
   hw_timer_t * timer = NULL;
   ^~~~~~~~~~
   __timer_t
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DMD32/examples/dmd_clock_readout/dmd_clock_readout.ino:52:16: error: expected initializer before 'triggerScan'
 void IRAM_ATTR triggerScan()
                ^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DMD32/examples/dmd_clock_readout/dmd_clock_readout.ino:52:16: error: expected initializer before 'triggerScan'
 void IRAM_ATTR triggerScan()
                ^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DMD32/examples/dmd_clock_readout/dmd_clock_readout.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DMD32/examples/dmd_clock_readout/dmd_clock_readout.ino:82:22: error: 'ESP' was not declared in this scope
   uint8_t cpuClock = ESP.getCpuFreqMHz();
                      ^~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DMD32/examples/dmd_clock_readout/dmd_clock_readout.ino:86:3: error: 'timer' was not declared in this scope
   timer = timerBegin(0, cpuClock, true);
   ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DMD32/examples/dmd_clock_readout/dmd_clock_readout.ino:86:3: note: suggested alternative: 'time'
   timer = timerBegin(0, cpuClock, true);
   ^~~~~
   time
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DMD32/examples/dmd_clock_readout/dmd_clock_readout.ino:86:11: error: 'timerBegin' was not declared in this scope
   timer = timerBegin(0, cpuClock, true);
           ^~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DMD32/examples/dmd_clock_readout/dmd_clock_readout.ino:86:11: note: suggested alternative: 'timer_hw_t'
   timer = timerBegin(0, cpuClock, true);
           ^~~~~~~~~~
           timer_hw_t
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DMD32/examples/dmd_clock_readout/dmd_clock_readout.ino:88:32: error: 'triggerScan' was not declared in this scope
   timerAttachInterrupt(timer, &triggerScan, true);
                                ^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DMD32/examples/dmd_clock_readout/dmd_clock_readout.ino:88:3: error: 'timerAttachInterrupt' was not declared in this scope
   timerAttachInterrupt(timer, &triggerScan, true);
   ^~~~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DMD32/examples/dmd_clock_readout/dmd_clock_readout.ino:88:3: note: suggested alternative: 'detachInterrupt'
   timerAttachInterrupt(timer, &triggerScan, true);
   ^~~~~~~~~~~~~~~~~~~~
   detachInterrupt
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DMD32/examples/dmd_clock_readout/dmd_clock_readout.ino:91:3: error: 'timerAlarmWrite' was not declared in this scope
   timerAlarmWrite(timer, 300, true);
   ^~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DMD32/examples/dmd_clock_readout/dmd_clock_readout.ino:94:3: error: 'timerAlarmEnable' was not declared in this scope
   timerAlarmEnable(timer);
   ^~~~~~~~~~~~~~~~

examples/dmd_demo

Result: FAIL

WARNING: library DMD32 claims to run on esp32 architecture(s) and may be incompatible with your current board which runs on mbed_nano architecture(s).
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DMD32/examples/dmd_demo/dmd_demo.ino:48:3: error: 'hw_timer_t' does not name a type; did you mean '__timer_t'?
   hw_timer_t * timer = NULL;
   ^~~~~~~~~~
   __timer_t
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DMD32/examples/dmd_demo/dmd_demo.ino:54:16: error: expected initializer before 'triggerScan'
 void IRAM_ATTR triggerScan()
                ^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DMD32/examples/dmd_demo/dmd_demo.ino:54:16: error: expected initializer before 'triggerScan'
 void IRAM_ATTR triggerScan()
                ^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DMD32/examples/dmd_demo/dmd_demo.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DMD32/examples/dmd_demo/dmd_demo.ino:67:22: error: 'ESP' was not declared in this scope
   uint8_t cpuClock = ESP.getCpuFreqMHz();
                      ^~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DMD32/examples/dmd_demo/dmd_demo.ino:71:3: error: 'timer' was not declared in this scope
   timer = timerBegin(0, cpuClock, true);
   ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DMD32/examples/dmd_demo/dmd_demo.ino:71:3: note: suggested alternative: 'time'
   timer = timerBegin(0, cpuClock, true);
   ^~~~~
   time
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DMD32/examples/dmd_demo/dmd_demo.ino:71:11: error: 'timerBegin' was not declared in this scope
   timer = timerBegin(0, cpuClock, true);
           ^~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DMD32/examples/dmd_demo/dmd_demo.ino:71:11: note: suggested alternative: 'timer_hw_t'
   timer = timerBegin(0, cpuClock, true);
           ^~~~~~~~~~
           timer_hw_t
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DMD32/examples/dmd_demo/dmd_demo.ino:73:32: error: 'triggerScan' was not declared in this scope
   timerAttachInterrupt(timer, &triggerScan, true);
                                ^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DMD32/examples/dmd_demo/dmd_demo.ino:73:3: error: 'timerAttachInterrupt' was not declared in this scope
   timerAttachInterrupt(timer, &triggerScan, true);
   ^~~~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DMD32/examples/dmd_demo/dmd_demo.ino:73:3: note: suggested alternative: 'detachInterrupt'
   timerAttachInterrupt(timer, &triggerScan, true);
   ^~~~~~~~~~~~~~~~~~~~
   detachInterrupt
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DMD32/examples/dmd_demo/dmd_demo.ino:76:3: error: 'timerAlarmWrite' was not declared in this scope
   timerAlarmWrite(timer, 300, true);
   ^~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DMD32/examples/dmd_demo/dmd_demo.ino:79:3: error: 'timerAlarmEnable' was not declared in this scope
   timerAlarmEnable(timer);
   ^~~~~~~~~~~~~~~~

examples/dmd_latin_chars

Result: FAIL

WARNING: library DMD32 claims to run on esp32 architecture(s) and may be incompatible with your current board which runs on mbed_nano architecture(s).
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DMD32/examples/dmd_latin_chars/dmd_latin_chars.ino:57:3: error: 'hw_timer_t' does not name a type; did you mean '__timer_t'?
   hw_timer_t * timer = NULL;
   ^~~~~~~~~~
   __timer_t
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DMD32/examples/dmd_latin_chars/dmd_latin_chars.ino:63:16: error: expected initializer before 'triggerScan'
 void IRAM_ATTR triggerScan()
                ^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DMD32/examples/dmd_latin_chars/dmd_latin_chars.ino:63:16: error: expected initializer before 'triggerScan'
 void IRAM_ATTR triggerScan()
                ^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DMD32/examples/dmd_latin_chars/dmd_latin_chars.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DMD32/examples/dmd_latin_chars/dmd_latin_chars.ino:77:22: error: 'ESP' was not declared in this scope
   uint8_t cpuClock = ESP.getCpuFreqMHz();
                      ^~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DMD32/examples/dmd_latin_chars/dmd_latin_chars.ino:81:3: error: 'timer' was not declared in this scope
   timer = timerBegin(0, cpuClock, true);
   ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DMD32/examples/dmd_latin_chars/dmd_latin_chars.ino:81:3: note: suggested alternative: 'time'
   timer = timerBegin(0, cpuClock, true);
   ^~~~~
   time
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DMD32/examples/dmd_latin_chars/dmd_latin_chars.ino:81:11: error: 'timerBegin' was not declared in this scope
   timer = timerBegin(0, cpuClock, true);
           ^~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DMD32/examples/dmd_latin_chars/dmd_latin_chars.ino:81:11: note: suggested alternative: 'timer_hw_t'
   timer = timerBegin(0, cpuClock, true);
           ^~~~~~~~~~
           timer_hw_t
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DMD32/examples/dmd_latin_chars/dmd_latin_chars.ino:83:32: error: 'triggerScan' was not declared in this scope
   timerAttachInterrupt(timer, &triggerScan, true);
                                ^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DMD32/examples/dmd_latin_chars/dmd_latin_chars.ino:83:3: error: 'timerAttachInterrupt' was not declared in this scope
   timerAttachInterrupt(timer, &triggerScan, true);
   ^~~~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DMD32/examples/dmd_latin_chars/dmd_latin_chars.ino:83:3: note: suggested alternative: 'detachInterrupt'
   timerAttachInterrupt(timer, &triggerScan, true);
   ^~~~~~~~~~~~~~~~~~~~
   detachInterrupt
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DMD32/examples/dmd_latin_chars/dmd_latin_chars.ino:86:3: error: 'timerAlarmWrite' was not declared in this scope
   timerAlarmWrite(timer, 300, true);
   ^~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DMD32/examples/dmd_latin_chars/dmd_latin_chars.ino:89:3: error: 'timerAlarmEnable' was not declared in this scope
   timerAlarmEnable(timer);
   ^~~~~~~~~~~~~~~~

arduino:megaavr:nona4809 @ 1.8.7

Inclusion

Result: FAIL

WARNING: library DMD32 claims to run on esp32 architecture(s) and may be incompatible with your current board which runs on megaavr architecture(s).
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DMD32/DMD32.cpp: In constructor 'DMD::DMD(byte, byte)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DMD32/DMD32.cpp:51:22: error: 'VSPI' was not declared in this scope
  vspi = new SPIClass(VSPI);
                      ^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DMD32/DMD32.cpp:51:22: note: suggested alternative: 'SPI'
  vspi = new SPIClass(VSPI);
                      ^~~~
                      SPI

examples/dmd_clock_readout

Result: FAIL

WARNING: library DMD32 claims to run on esp32 architecture(s) and may be incompatible with your current board which runs on megaavr architecture(s).
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DMD32/examples/dmd_clock_readout/dmd_clock_readout.ino:46:3: error: 'hw_timer_t' does not name a type; did you mean '__size_t'?
   hw_timer_t * timer = NULL;
   ^~~~~~~~~~
   __size_t
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DMD32/examples/dmd_clock_readout/dmd_clock_readout.ino:52:16: error: expected initializer before 'triggerScan'
 void IRAM_ATTR triggerScan()
                ^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DMD32/examples/dmd_clock_readout/dmd_clock_readout.ino:52:16: error: expected initializer before 'triggerScan'
 void IRAM_ATTR triggerScan()
                ^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DMD32/examples/dmd_clock_readout/dmd_clock_readout.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DMD32/examples/dmd_clock_readout/dmd_clock_readout.ino:82:22: error: 'ESP' was not declared in this scope
   uint8_t cpuClock = ESP.getCpuFreqMHz();
                      ^~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DMD32/examples/dmd_clock_readout/dmd_clock_readout.ino:82:22: note: suggested alternative: 'SP'
   uint8_t cpuClock = ESP.getCpuFreqMHz();
                      ^~~
                      SP
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DMD32/examples/dmd_clock_readout/dmd_clock_readout.ino:86:3: error: 'timer' was not declared in this scope
   timer = timerBegin(0, cpuClock, true);
   ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DMD32/examples/dmd_clock_readout/dmd_clock_readout.ino:86:11: error: 'timerBegin' was not declared in this scope
   timer = timerBegin(0, cpuClock, true);
           ^~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DMD32/examples/dmd_clock_readout/dmd_clock_readout.ino:88:32: error: 'triggerScan' was not declared in this scope
   timerAttachInterrupt(timer, &triggerScan, true);
                                ^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DMD32/examples/dmd_clock_readout/dmd_clock_readout.ino:88:3: error: 'timerAttachInterrupt' was not declared in this scope
   timerAttachInterrupt(timer, &triggerScan, true);
   ^~~~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DMD32/examples/dmd_clock_readout/dmd_clock_readout.ino:88:3: note: suggested alternative: 'detachInterrupt'
   timerAttachInterrupt(timer, &triggerScan, true);
   ^~~~~~~~~~~~~~~~~~~~
   detachInterrupt
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DMD32/examples/dmd_clock_readout/dmd_clock_readout.ino:91:3: error: 'timerAlarmWrite' was not declared in this scope
   timerAlarmWrite(timer, 300, true);
   ^~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DMD32/examples/dmd_clock_readout/dmd_clock_readout.ino:94:3: error: 'timerAlarmEnable' was not declared in this scope
   timerAlarmEnable(timer);
   ^~~~~~~~~~~~~~~~

examples/dmd_demo

Result: FAIL

WARNING: library DMD32 claims to run on esp32 architecture(s) and may be incompatible with your current board which runs on megaavr architecture(s).
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DMD32/examples/dmd_demo/dmd_demo.ino:48:3: error: 'hw_timer_t' does not name a type; did you mean '__size_t'?
   hw_timer_t * timer = NULL;
   ^~~~~~~~~~
   __size_t
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DMD32/examples/dmd_demo/dmd_demo.ino:54:16: error: expected initializer before 'triggerScan'
 void IRAM_ATTR triggerScan()
                ^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DMD32/examples/dmd_demo/dmd_demo.ino:54:16: error: expected initializer before 'triggerScan'
 void IRAM_ATTR triggerScan()
                ^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DMD32/examples/dmd_demo/dmd_demo.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DMD32/examples/dmd_demo/dmd_demo.ino:67:22: error: 'ESP' was not declared in this scope
   uint8_t cpuClock = ESP.getCpuFreqMHz();
                      ^~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DMD32/examples/dmd_demo/dmd_demo.ino:67:22: note: suggested alternative: 'SP'
   uint8_t cpuClock = ESP.getCpuFreqMHz();
                      ^~~
                      SP
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DMD32/examples/dmd_demo/dmd_demo.ino:71:3: error: 'timer' was not declared in this scope
   timer = timerBegin(0, cpuClock, true);
   ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DMD32/examples/dmd_demo/dmd_demo.ino:71:11: error: 'timerBegin' was not declared in this scope
   timer = timerBegin(0, cpuClock, true);
           ^~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DMD32/examples/dmd_demo/dmd_demo.ino:73:32: error: 'triggerScan' was not declared in this scope
   timerAttachInterrupt(timer, &triggerScan, true);
                                ^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DMD32/examples/dmd_demo/dmd_demo.ino:73:3: error: 'timerAttachInterrupt' was not declared in this scope
   timerAttachInterrupt(timer, &triggerScan, true);
   ^~~~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DMD32/examples/dmd_demo/dmd_demo.ino:73:3: note: suggested alternative: 'detachInterrupt'
   timerAttachInterrupt(timer, &triggerScan, true);
   ^~~~~~~~~~~~~~~~~~~~
   detachInterrupt
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DMD32/examples/dmd_demo/dmd_demo.ino:76:3: error: 'timerAlarmWrite' was not declared in this scope
   timerAlarmWrite(timer, 300, true);
   ^~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DMD32/examples/dmd_demo/dmd_demo.ino:79:3: error: 'timerAlarmEnable' was not declared in this scope
   timerAlarmEnable(timer);
   ^~~~~~~~~~~~~~~~

examples/dmd_latin_chars

Result: FAIL

WARNING: library DMD32 claims to run on esp32 architecture(s) and may be incompatible with your current board which runs on megaavr architecture(s).
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DMD32/examples/dmd_latin_chars/dmd_latin_chars.ino:57:3: error: 'hw_timer_t' does not name a type; did you mean '__size_t'?
   hw_timer_t * timer = NULL;
   ^~~~~~~~~~
   __size_t
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DMD32/examples/dmd_latin_chars/dmd_latin_chars.ino:63:16: error: expected initializer before 'triggerScan'
 void IRAM_ATTR triggerScan()
                ^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DMD32/examples/dmd_latin_chars/dmd_latin_chars.ino:63:16: error: expected initializer before 'triggerScan'
 void IRAM_ATTR triggerScan()
                ^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DMD32/examples/dmd_latin_chars/dmd_latin_chars.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DMD32/examples/dmd_latin_chars/dmd_latin_chars.ino:77:22: error: 'ESP' was not declared in this scope
   uint8_t cpuClock = ESP.getCpuFreqMHz();
                      ^~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DMD32/examples/dmd_latin_chars/dmd_latin_chars.ino:77:22: note: suggested alternative: 'SP'
   uint8_t cpuClock = ESP.getCpuFreqMHz();
                      ^~~
                      SP
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DMD32/examples/dmd_latin_chars/dmd_latin_chars.ino:81:3: error: 'timer' was not declared in this scope
   timer = timerBegin(0, cpuClock, true);
   ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DMD32/examples/dmd_latin_chars/dmd_latin_chars.ino:81:11: error: 'timerBegin' was not declared in this scope
   timer = timerBegin(0, cpuClock, true);
           ^~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DMD32/examples/dmd_latin_chars/dmd_latin_chars.ino:83:32: error: 'triggerScan' was not declared in this scope
   timerAttachInterrupt(timer, &triggerScan, true);
                                ^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DMD32/examples/dmd_latin_chars/dmd_latin_chars.ino:83:3: error: 'timerAttachInterrupt' was not declared in this scope
   timerAttachInterrupt(timer, &triggerScan, true);
   ^~~~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DMD32/examples/dmd_latin_chars/dmd_latin_chars.ino:83:3: note: suggested alternative: 'detachInterrupt'
   timerAttachInterrupt(timer, &triggerScan, true);
   ^~~~~~~~~~~~~~~~~~~~
   detachInterrupt
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DMD32/examples/dmd_latin_chars/dmd_latin_chars.ino:86:3: error: 'timerAlarmWrite' was not declared in this scope
   timerAlarmWrite(timer, 300, true);
   ^~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DMD32/examples/dmd_latin_chars/dmd_latin_chars.ino:89:3: error: 'timerAlarmEnable' was not declared in this scope
   timerAlarmEnable(timer);
   ^~~~~~~~~~~~~~~~

arduino:samd:mkrwifi1010 @ 1.8.12

Inclusion

Result: FAIL

WARNING: library DMD32 claims to run on esp32 architecture(s) and may be incompatible with your current board which runs on samd architecture(s).
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DMD32/DMD32.cpp: In constructor 'DMD::DMD(byte, byte)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DMD32/DMD32.cpp:51:22: error: 'VSPI' was not declared in this scope
  vspi = new SPIClass(VSPI);
                      ^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DMD32/DMD32.cpp:51:22: note: suggested alternative: 'SPI'
  vspi = new SPIClass(VSPI);
                      ^~~~
                      SPI
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DMD32/DMD32.cpp:51:26: error: invalid new-expression of abstract class type 'arduino::HardwareSPI'
  vspi = new SPIClass(VSPI);
                          ^
In file included from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/libraries/SPI/SPI.h:24:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DMD32/DMD32.h:45,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DMD32/DMD32.cpp:28:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/cores/arduino/api/HardwareSPI.h:104:7: note:   because the following virtual functions are pure within 'arduino::HardwareSPI':
 class HardwareSPI
       ^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/cores/arduino/api/HardwareSPI.h:109:21: note: 	virtual uint8_t arduino::HardwareSPI::transfer(uint8_t)
     virtual uint8_t transfer(uint8_t data) = 0;
                     ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/cores/arduino/api/HardwareSPI.h:110:22: note: 	virtual uint16_t arduino::HardwareSPI::transfer16(uint16_t)
     virtual uint16_t transfer16(uint16_t data) = 0;
                      ^~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/cores/arduino/api/HardwareSPI.h:111:18: note: 	virtual void arduino::HardwareSPI::transfer(void*, size_t)
     virtual void transfer(void *buf, size_t count) = 0;
                  ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/cores/arduino/api/HardwareSPI.h:114:18: note: 	virtual void arduino::HardwareSPI::usingInterrupt(int)
     virtual void usingInterrupt(int interruptNumber) = 0;
                  ^~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/cores/arduino/api/HardwareSPI.h:115:18: note: 	virtual void arduino::HardwareSPI::notUsingInterrupt(int)
     virtual void notUsingInterrupt(int interruptNumber) = 0;
                  ^~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/cores/arduino/api/HardwareSPI.h:116:18: note: 	virtual void arduino::HardwareSPI::beginTransaction(arduino::SPISettings)
     virtual void beginTransaction(SPISettings settings) = 0;
                  ^~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/cores/arduino/api/HardwareSPI.h:117:18: note: 	virtual void arduino::HardwareSPI::endTransaction()
     virtual void endTransaction(void) = 0;
                  ^~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/cores/arduino/api/HardwareSPI.h:120:18: note: 	virtual void arduino::HardwareSPI::attachInterrupt()
     virtual void attachInterrupt() = 0;
                  ^~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/cores/arduino/api/HardwareSPI.h:121:18: note: 	virtual void arduino::HardwareSPI::detachInterrupt()
     virtual void detachInterrupt() = 0;
                  ^~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/cores/arduino/api/HardwareSPI.h:123:18: note: 	virtual void arduino::HardwareSPI::begin()
     virtual void begin() = 0;
                  ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/cores/arduino/api/HardwareSPI.h:124:18: note: 	virtual void arduino::HardwareSPI::end()
     virtual void end() = 0;
                  ^~~

examples/dmd_clock_readout

Result: FAIL

WARNING: library DMD32 claims to run on esp32 architecture(s) and may be incompatible with your current board which runs on samd architecture(s).
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DMD32/examples/dmd_clock_readout/dmd_clock_readout.ino:46:3: error: 'hw_timer_t' does not name a type; did you mean '__timer_t'?
   hw_timer_t * timer = NULL;
   ^~~~~~~~~~
   __timer_t
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DMD32/examples/dmd_clock_readout/dmd_clock_readout.ino:52:16: error: expected initializer before 'triggerScan'
 void IRAM_ATTR triggerScan()
                ^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DMD32/examples/dmd_clock_readout/dmd_clock_readout.ino:52:16: error: expected initializer before 'triggerScan'
 void IRAM_ATTR triggerScan()
                ^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DMD32/examples/dmd_clock_readout/dmd_clock_readout.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DMD32/examples/dmd_clock_readout/dmd_clock_readout.ino:82:22: error: 'ESP' was not declared in this scope
   uint8_t cpuClock = ESP.getCpuFreqMHz();
                      ^~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DMD32/examples/dmd_clock_readout/dmd_clock_readout.ino:86:3: error: 'timer' was not declared in this scope
   timer = timerBegin(0, cpuClock, true);
   ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DMD32/examples/dmd_clock_readout/dmd_clock_readout.ino:86:3: note: suggested alternative: 'timer_t'
   timer = timerBegin(0, cpuClock, true);
   ^~~~~
   timer_t
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DMD32/examples/dmd_clock_readout/dmd_clock_readout.ino:86:11: error: 'timerBegin' was not declared in this scope
   timer = timerBegin(0, cpuClock, true);
           ^~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DMD32/examples/dmd_clock_readout/dmd_clock_readout.ino:86:11: note: suggested alternative: 'timer_t'
   timer = timerBegin(0, cpuClock, true);
           ^~~~~~~~~~
           timer_t
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DMD32/examples/dmd_clock_readout/dmd_clock_readout.ino:88:32: error: 'triggerScan' was not declared in this scope
   timerAttachInterrupt(timer, &triggerScan, true);
                                ^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DMD32/examples/dmd_clock_readout/dmd_clock_readout.ino:88:3: error: 'timerAttachInterrupt' was not declared in this scope
   timerAttachInterrupt(timer, &triggerScan, true);
   ^~~~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DMD32/examples/dmd_clock_readout/dmd_clock_readout.ino:88:3: note: suggested alternative: 'detachInterrupt'
   timerAttachInterrupt(timer, &triggerScan, true);
   ^~~~~~~~~~~~~~~~~~~~
   detachInterrupt
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DMD32/examples/dmd_clock_readout/dmd_clock_readout.ino:91:3: error: 'timerAlarmWrite' was not declared in this scope
   timerAlarmWrite(timer, 300, true);
   ^~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DMD32/examples/dmd_clock_readout/dmd_clock_readout.ino:94:3: error: 'timerAlarmEnable' was not declared in this scope
   timerAlarmEnable(timer);
   ^~~~~~~~~~~~~~~~

examples/dmd_demo

Result: FAIL

WARNING: library DMD32 claims to run on esp32 architecture(s) and may be incompatible with your current board which runs on samd architecture(s).
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DMD32/examples/dmd_demo/dmd_demo.ino:48:3: error: 'hw_timer_t' does not name a type; did you mean '__timer_t'?
   hw_timer_t * timer = NULL;
   ^~~~~~~~~~
   __timer_t
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DMD32/examples/dmd_demo/dmd_demo.ino:54:16: error: expected initializer before 'triggerScan'
 void IRAM_ATTR triggerScan()
                ^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DMD32/examples/dmd_demo/dmd_demo.ino:54:16: error: expected initializer before 'triggerScan'
 void IRAM_ATTR triggerScan()
                ^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DMD32/examples/dmd_demo/dmd_demo.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DMD32/examples/dmd_demo/dmd_demo.ino:67:22: error: 'ESP' was not declared in this scope
   uint8_t cpuClock = ESP.getCpuFreqMHz();
                      ^~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DMD32/examples/dmd_demo/dmd_demo.ino:71:3: error: 'timer' was not declared in this scope
   timer = timerBegin(0, cpuClock, true);
   ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DMD32/examples/dmd_demo/dmd_demo.ino:71:3: note: suggested alternative: 'timer_t'
   timer = timerBegin(0, cpuClock, true);
   ^~~~~
   timer_t
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DMD32/examples/dmd_demo/dmd_demo.ino:71:11: error: 'timerBegin' was not declared in this scope
   timer = timerBegin(0, cpuClock, true);
           ^~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DMD32/examples/dmd_demo/dmd_demo.ino:71:11: note: suggested alternative: 'timer_t'
   timer = timerBegin(0, cpuClock, true);
           ^~~~~~~~~~
           timer_t
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DMD32/examples/dmd_demo/dmd_demo.ino:73:32: error: 'triggerScan' was not declared in this scope
   timerAttachInterrupt(timer, &triggerScan, true);
                                ^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DMD32/examples/dmd_demo/dmd_demo.ino:73:3: error: 'timerAttachInterrupt' was not declared in this scope
   timerAttachInterrupt(timer, &triggerScan, true);
   ^~~~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DMD32/examples/dmd_demo/dmd_demo.ino:73:3: note: suggested alternative: 'detachInterrupt'
   timerAttachInterrupt(timer, &triggerScan, true);
   ^~~~~~~~~~~~~~~~~~~~
   detachInterrupt
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DMD32/examples/dmd_demo/dmd_demo.ino:76:3: error: 'timerAlarmWrite' was not declared in this scope
   timerAlarmWrite(timer, 300, true);
   ^~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DMD32/examples/dmd_demo/dmd_demo.ino:79:3: error: 'timerAlarmEnable' was not declared in this scope
   timerAlarmEnable(timer);
   ^~~~~~~~~~~~~~~~

examples/dmd_latin_chars

Result: FAIL

WARNING: library DMD32 claims to run on esp32 architecture(s) and may be incompatible with your current board which runs on samd architecture(s).
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DMD32/examples/dmd_latin_chars/dmd_latin_chars.ino:57:3: error: 'hw_timer_t' does not name a type; did you mean '__timer_t'?
   hw_timer_t * timer = NULL;
   ^~~~~~~~~~
   __timer_t
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DMD32/examples/dmd_latin_chars/dmd_latin_chars.ino:63:16: error: expected initializer before 'triggerScan'
 void IRAM_ATTR triggerScan()
                ^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DMD32/examples/dmd_latin_chars/dmd_latin_chars.ino:63:16: error: expected initializer before 'triggerScan'
 void IRAM_ATTR triggerScan()
                ^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DMD32/examples/dmd_latin_chars/dmd_latin_chars.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DMD32/examples/dmd_latin_chars/dmd_latin_chars.ino:77:22: error: 'ESP' was not declared in this scope
   uint8_t cpuClock = ESP.getCpuFreqMHz();
                      ^~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DMD32/examples/dmd_latin_chars/dmd_latin_chars.ino:81:3: error: 'timer' was not declared in this scope
   timer = timerBegin(0, cpuClock, true);
   ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DMD32/examples/dmd_latin_chars/dmd_latin_chars.ino:81:3: note: suggested alternative: 'timer_t'
   timer = timerBegin(0, cpuClock, true);
   ^~~~~
   timer_t
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DMD32/examples/dmd_latin_chars/dmd_latin_chars.ino:81:11: error: 'timerBegin' was not declared in this scope
   timer = timerBegin(0, cpuClock, true);
           ^~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DMD32/examples/dmd_latin_chars/dmd_latin_chars.ino:81:11: note: suggested alternative: 'timer_t'
   timer = timerBegin(0, cpuClock, true);
           ^~~~~~~~~~
           timer_t
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DMD32/examples/dmd_latin_chars/dmd_latin_chars.ino:83:32: error: 'triggerScan' was not declared in this scope
   timerAttachInterrupt(timer, &triggerScan, true);
                                ^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DMD32/examples/dmd_latin_chars/dmd_latin_chars.ino:83:3: error: 'timerAttachInterrupt' was not declared in this scope
   timerAttachInterrupt(timer, &triggerScan, true);
   ^~~~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DMD32/examples/dmd_latin_chars/dmd_latin_chars.ino:83:3: note: suggested alternative: 'detachInterrupt'
   timerAttachInterrupt(timer, &triggerScan, true);
   ^~~~~~~~~~~~~~~~~~~~
   detachInterrupt
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DMD32/examples/dmd_latin_chars/dmd_latin_chars.ino:86:3: error: 'timerAlarmWrite' was not declared in this scope
   timerAlarmWrite(timer, 300, true);
   ^~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DMD32/examples/dmd_latin_chars/dmd_latin_chars.ino:89:3: error: 'timerAlarmEnable' was not declared in this scope
   timerAlarmEnable(timer);
   ^~~~~~~~~~~~~~~~

esp32:esp32:d1_mini32 @ 1.0.6

Inclusion

Result: PASS

Sketch uses 198656 bytes (15%) of program storage space. Maximum is 1310720 bytes.
Global variables use 13112 bytes (4%) of dynamic memory, leaving 314568 bytes for local variables. Maximum is 327680 bytes.

examples/dmd_clock_readout

Result: PASS

Sketch uses 207766 bytes (15%) of program storage space. Maximum is 1310720 bytes.
Global variables use 13736 bytes (4%) of dynamic memory, leaving 313944 bytes for local variables. Maximum is 327680 bytes.

examples/dmd_demo

Result: PASS

Sketch uses 209622 bytes (15%) of program storage space. Maximum is 1310720 bytes.
Global variables use 13736 bytes (4%) of dynamic memory, leaving 313944 bytes for local variables. Maximum is 327680 bytes.

examples/dmd_latin_chars

Result: PASS

Sketch uses 215390 bytes (16%) of program storage space. Maximum is 1310720 bytes.
Global variables use 13896 bytes (4%) of dynamic memory, leaving 313784 bytes for local variables. Maximum is 327680 bytes.