DRA818 - compatibility matrix

This report was generated on Wednesday, 23-Feb-22 22:48:15 CET using arduino-testlib.

DRA818

Version: 1.0.0
More details

Compatibility matrix

Board	Claims compatibility	Inclusion	scan	debug
arduino:avr:uno 1.8.4	Yes	PASS	PASS	PASS
arduino:mbed_nano:nanorp2040connect 2.7.2	Yes ⚠️	FAIL	FAIL	FAIL
arduino:megaavr:nona4809 1.8.7	Yes	PASS	PASS	PASS
arduino:samd:mkrwifi1010 1.8.12	Yes ⚠️	FAIL	FAIL	FAIL
esp32:esp32:d1_mini32 1.0.6	Yes ⚠️	FAIL	FAIL	FAIL

Compilation logs

arduino:avr:uno @ 1.8.4

Inclusion

Result: PASS

Sketch uses 510 bytes (1%) of program storage space. Maximum is 32256 bytes.
Global variables use 11 bytes (0%) of dynamic memory, leaving 2037 bytes for local variables. Maximum is 2048 bytes.

examples/debug

Result: PASS

Sketch uses 9312 bytes (28%) of program storage space. Maximum is 32256 bytes.
Global variables use 526 bytes (25%) of dynamic memory, leaving 1522 bytes for local variables. Maximum is 2048 bytes.

examples/scan

Result: PASS

Sketch uses 9312 bytes (28%) of program storage space. Maximum is 32256 bytes.
Global variables use 526 bytes (25%) of dynamic memory, leaving 1522 bytes for local variables. Maximum is 2048 bytes.

arduino:mbed_nano:nanorp2040connect @ 2.7.2

Inclusion

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Dabble/src/SoftwareSerial.cpp:45:10: fatal error: util/delay_basic.h: No such file or directory
 #include <util/delay_basic.h>
          ^~~~~~~~~~~~~~~~~~~~
compilation terminated.
Multiple libraries were found for "SoftwareSerial.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Dabble
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Printoo_Library
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EspSoftwareSerial

examples/debug

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Dabble/src/SoftwareSerial.cpp:45:10: fatal error: util/delay_basic.h: No such file or directory
 #include <util/delay_basic.h>
          ^~~~~~~~~~~~~~~~~~~~
compilation terminated.
Multiple libraries were found for "SoftwareSerial.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Dabble
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EspSoftwareSerial
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Printoo_Library

examples/scan

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Dabble/src/SoftwareSerial.cpp:45:10: fatal error: util/delay_basic.h: No such file or directory
 #include <util/delay_basic.h>
          ^~~~~~~~~~~~~~~~~~~~
compilation terminated.
Multiple libraries were found for "SoftwareSerial.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Dabble
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Printoo_Library
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EspSoftwareSerial

arduino:megaavr:nona4809 @ 1.8.7

Inclusion

Result: PASS

Sketch uses 1354 bytes (2%) of program storage space. Maximum is 49152 bytes.
Global variables use 120 bytes (1%) of dynamic memory, leaving 6024 bytes for local variables. Maximum is 6144 bytes.

examples/debug

Result: PASS

Sketch uses 10638 bytes (21%) of program storage space. Maximum is 49152 bytes.
Global variables use 455 bytes (7%) of dynamic memory, leaving 5689 bytes for local variables. Maximum is 6144 bytes.

examples/scan

Result: PASS

Sketch uses 10638 bytes (21%) of program storage space. Maximum is 49152 bytes.
Global variables use 455 bytes (7%) of dynamic memory, leaving 5689 bytes for local variables. Maximum is 6144 bytes.

arduino:samd:mkrwifi1010 @ 1.8.12

Inclusion

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Dabble/src/SoftwareSerial.cpp:45:10: fatal error: util/delay_basic.h: No such file or directory
 #include <util/delay_basic.h>
          ^~~~~~~~~~~~~~~~~~~~
compilation terminated.
Multiple libraries were found for "SoftwareSerial.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Dabble
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EspSoftwareSerial
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Printoo_Library

examples/debug

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Dabble/src/SoftwareSerial.cpp:45:10: fatal error: util/delay_basic.h: No such file or directory
 #include <util/delay_basic.h>
          ^~~~~~~~~~~~~~~~~~~~
compilation terminated.
Multiple libraries were found for "SoftwareSerial.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Dabble
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EspSoftwareSerial
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Printoo_Library

examples/scan

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Dabble/src/SoftwareSerial.cpp:45:10: fatal error: util/delay_basic.h: No such file or directory
 #include <util/delay_basic.h>
          ^~~~~~~~~~~~~~~~~~~~
compilation terminated.
Multiple libraries were found for "SoftwareSerial.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Dabble
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Printoo_Library
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EspSoftwareSerial

esp32:esp32:d1_mini32 @ 1.0.6

Inclusion

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DRA818/src/DRA818.cpp:190:239: error: default argument given for parameter 13 of 'static DRA818* DRA818::configure(SoftwareSerial*, uint8_t, float, float, uint8_t, uint8_t, uint8_t, uint8_t, uint8_t, bool, bool, bool, Stream*)' [-fpermissive]
 static DRA818* DRA818::configure(SoftwareSerial *stream, uint8_t type, float freq_rx, float freq_tx, uint8_t squelch, uint8_t volume, uint8_t ctcss_rx, uint8_t ctcss_tx, uint8_t bandwidth, bool pre, bool high, bool low, Stream *log = NULL) {
                                                                                                                                                                                                                                               ^
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DRA818/src/DRA818.cpp:22:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DRA818/src/DRA818.h:62:24: note: previous specification in 'static DRA818* DRA818::configure(SoftwareSerial*, uint8_t, float, float, uint8_t, uint8_t, uint8_t, uint8_t, uint8_t, bool, bool, bool, Stream*)' here
         static DRA818* configure(SoftwareSerial *stream, uint8_t type, float freq_rx, float freq_tx, uint8_t squelch, uint8_t volume, uint8_t ctcss_rx, uint8_t ctcss_tx, uint8_t bandwidth, bool pre, bool high, bool low, Stream *log = NULL);
                        ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DRA818/src/DRA818.cpp:190:239: error: cannot declare member function 'static DRA818* DRA818::configure(SoftwareSerial*, uint8_t, float, float, uint8_t, uint8_t, uint8_t, uint8_t, uint8_t, bool, bool, bool, Stream*)' to have static linkage [-fpermissive]
 static DRA818* DRA818::configure(SoftwareSerial *stream, uint8_t type, float freq_rx, float freq_tx, uint8_t squelch, uint8_t volume, uint8_t ctcss_rx, uint8_t ctcss_tx, uint8_t bandwidth, bool pre, bool high, bool low, Stream *log = NULL) {
                                                                                                                                                                                                                                               ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DRA818/src/DRA818.cpp:195:239: error: default argument given for parameter 13 of 'static DRA818* DRA818::configure(HardwareSerial*, uint8_t, float, float, uint8_t, uint8_t, uint8_t, uint8_t, uint8_t, bool, bool, bool, Stream*)' [-fpermissive]
 static DRA818* DRA818::configure(HardwareSerial *stream, uint8_t type, float freq_rx, float freq_tx, uint8_t squelch, uint8_t volume, uint8_t ctcss_rx, uint8_t ctcss_tx, uint8_t bandwidth, bool pre, bool high, bool low, Stream *log = NULL) {
                                                                                                                                                                                                                                               ^
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DRA818/src/DRA818.cpp:22:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DRA818/src/DRA818.h:63:24: note: previous specification in 'static DRA818* DRA818::configure(HardwareSerial*, uint8_t, float, float, uint8_t, uint8_t, uint8_t, uint8_t, uint8_t, bool, bool, bool, Stream*)' here
         static DRA818* configure(HardwareSerial *stream, uint8_t type, float freq_rx, float freq_tx, uint8_t squelch, uint8_t volume, uint8_t ctcss_rx, uint8_t ctcss_tx, uint8_t bandwidth, bool pre, bool high, bool low, Stream *log = NULL);
                        ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DRA818/src/DRA818.cpp:195:239: error: cannot declare member function 'static DRA818* DRA818::configure(HardwareSerial*, uint8_t, float, float, uint8_t, uint8_t, uint8_t, uint8_t, uint8_t, bool, bool, bool, Stream*)' to have static linkage [-fpermissive]
 static DRA818* DRA818::configure(HardwareSerial *stream, uint8_t type, float freq_rx, float freq_tx, uint8_t squelch, uint8_t volume, uint8_t ctcss_rx, uint8_t ctcss_tx, uint8_t bandwidth, bool pre, bool high, bool low, Stream *log = NULL) {
                                                                                                                                                                                                                                               ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DRA818/src/DRA818.cpp:200:214: error: default argument given for parameter 12 of 'static DRA818* DRA818::configure(DRA818*, float, float, uint8_t, uint8_t, uint8_t, uint8_t, uint8_t, bool, bool, bool, Stream*)' [-fpermissive]
 static DRA818* DRA818::configure(DRA818 *dra, float freq_rx, float freq_tx, uint8_t squelch, uint8_t volume, uint8_t ctcss_rx, uint8_t ctcss_tx, uint8_t bandwidth, bool pre, bool high, bool low, Stream *log = NULL) {
                                                                                                                                                                                                                      ^
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DRA818/src/DRA818.cpp:22:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DRA818/src/DRA818.h:70:24: note: previous specification in 'static DRA818* DRA818::configure(DRA818*, float, float, uint8_t, uint8_t, uint8_t, uint8_t, uint8_t, bool, bool, bool, Stream*)' here
         static DRA818* configure(DRA818 *dra, float freq_rx, float freq_tx, uint8_t squelch, uint8_t volume, uint8_t ctcss_rx, uint8_t ctcss_tx, uint8_t bandwidth, bool pre, bool high, bool low, Stream *log = NULL);
                        ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DRA818/src/DRA818.cpp:200:214: error: cannot declare member function 'static DRA818* DRA818::configure(DRA818*, float, float, uint8_t, uint8_t, uint8_t, uint8_t, uint8_t, bool, bool, bool, Stream*)' to have static linkage [-fpermissive]
 static DRA818* DRA818::configure(DRA818 *dra, float freq_rx, float freq_tx, uint8_t squelch, uint8_t volume, uint8_t ctcss_rx, uint8_t ctcss_tx, uint8_t bandwidth, bool pre, bool high, bool low, Stream *log = NULL) {
                                                                                                                                                                                                                      ^
Multiple libraries were found for "SoftwareSerial.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EspSoftwareSerial
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Printoo_Library
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Dabble

examples/debug

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DRA818/src/DRA818.cpp:190:239: error: default argument given for parameter 13 of 'static DRA818* DRA818::configure(SoftwareSerial*, uint8_t, float, float, uint8_t, uint8_t, uint8_t, uint8_t, uint8_t, bool, bool, bool, Stream*)' [-fpermissive]
 static DRA818* DRA818::configure(SoftwareSerial *stream, uint8_t type, float freq_rx, float freq_tx, uint8_t squelch, uint8_t volume, uint8_t ctcss_rx, uint8_t ctcss_tx, uint8_t bandwidth, bool pre, bool high, bool low, Stream *log = NULL) {
                                                                                                                                                                                                                                               ^
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DRA818/src/DRA818.cpp:22:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DRA818/src/DRA818.h:62:24: note: previous specification in 'static DRA818* DRA818::configure(SoftwareSerial*, uint8_t, float, float, uint8_t, uint8_t, uint8_t, uint8_t, uint8_t, bool, bool, bool, Stream*)' here
         static DRA818* configure(SoftwareSerial *stream, uint8_t type, float freq_rx, float freq_tx, uint8_t squelch, uint8_t volume, uint8_t ctcss_rx, uint8_t ctcss_tx, uint8_t bandwidth, bool pre, bool high, bool low, Stream *log = NULL);
                        ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DRA818/src/DRA818.cpp:190:239: error: cannot declare member function 'static DRA818* DRA818::configure(SoftwareSerial*, uint8_t, float, float, uint8_t, uint8_t, uint8_t, uint8_t, uint8_t, bool, bool, bool, Stream*)' to have static linkage [-fpermissive]
 static DRA818* DRA818::configure(SoftwareSerial *stream, uint8_t type, float freq_rx, float freq_tx, uint8_t squelch, uint8_t volume, uint8_t ctcss_rx, uint8_t ctcss_tx, uint8_t bandwidth, bool pre, bool high, bool low, Stream *log = NULL) {
                                                                                                                                                                                                                                               ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DRA818/src/DRA818.cpp:195:239: error: default argument given for parameter 13 of 'static DRA818* DRA818::configure(HardwareSerial*, uint8_t, float, float, uint8_t, uint8_t, uint8_t, uint8_t, uint8_t, bool, bool, bool, Stream*)' [-fpermissive]
 static DRA818* DRA818::configure(HardwareSerial *stream, uint8_t type, float freq_rx, float freq_tx, uint8_t squelch, uint8_t volume, uint8_t ctcss_rx, uint8_t ctcss_tx, uint8_t bandwidth, bool pre, bool high, bool low, Stream *log = NULL) {
                                                                                                                                                                                                                                               ^
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DRA818/src/DRA818.cpp:22:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DRA818/src/DRA818.h:63:24: note: previous specification in 'static DRA818* DRA818::configure(HardwareSerial*, uint8_t, float, float, uint8_t, uint8_t, uint8_t, uint8_t, uint8_t, bool, bool, bool, Stream*)' here
         static DRA818* configure(HardwareSerial *stream, uint8_t type, float freq_rx, float freq_tx, uint8_t squelch, uint8_t volume, uint8_t ctcss_rx, uint8_t ctcss_tx, uint8_t bandwidth, bool pre, bool high, bool low, Stream *log = NULL);
                        ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DRA818/src/DRA818.cpp:195:239: error: cannot declare member function 'static DRA818* DRA818::configure(HardwareSerial*, uint8_t, float, float, uint8_t, uint8_t, uint8_t, uint8_t, uint8_t, bool, bool, bool, Stream*)' to have static linkage [-fpermissive]
 static DRA818* DRA818::configure(HardwareSerial *stream, uint8_t type, float freq_rx, float freq_tx, uint8_t squelch, uint8_t volume, uint8_t ctcss_rx, uint8_t ctcss_tx, uint8_t bandwidth, bool pre, bool high, bool low, Stream *log = NULL) {
                                                                                                                                                                                                                                               ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DRA818/src/DRA818.cpp:200:214: error: default argument given for parameter 12 of 'static DRA818* DRA818::configure(DRA818*, float, float, uint8_t, uint8_t, uint8_t, uint8_t, uint8_t, bool, bool, bool, Stream*)' [-fpermissive]
 static DRA818* DRA818::configure(DRA818 *dra, float freq_rx, float freq_tx, uint8_t squelch, uint8_t volume, uint8_t ctcss_rx, uint8_t ctcss_tx, uint8_t bandwidth, bool pre, bool high, bool low, Stream *log = NULL) {
                                                                                                                                                                                                                      ^
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DRA818/src/DRA818.cpp:22:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DRA818/src/DRA818.h:70:24: note: previous specification in 'static DRA818* DRA818::configure(DRA818*, float, float, uint8_t, uint8_t, uint8_t, uint8_t, uint8_t, bool, bool, bool, Stream*)' here
         static DRA818* configure(DRA818 *dra, float freq_rx, float freq_tx, uint8_t squelch, uint8_t volume, uint8_t ctcss_rx, uint8_t ctcss_tx, uint8_t bandwidth, bool pre, bool high, bool low, Stream *log = NULL);
                        ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DRA818/src/DRA818.cpp:200:214: error: cannot declare member function 'static DRA818* DRA818::configure(DRA818*, float, float, uint8_t, uint8_t, uint8_t, uint8_t, uint8_t, bool, bool, bool, Stream*)' to have static linkage [-fpermissive]
 static DRA818* DRA818::configure(DRA818 *dra, float freq_rx, float freq_tx, uint8_t squelch, uint8_t volume, uint8_t ctcss_rx, uint8_t ctcss_tx, uint8_t bandwidth, bool pre, bool high, bool low, Stream *log = NULL) {
                                                                                                                                                                                                                      ^
Multiple libraries were found for "SoftwareSerial.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EspSoftwareSerial
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Dabble
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Printoo_Library

examples/scan

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DRA818/src/DRA818.cpp:190:239: error: default argument given for parameter 13 of 'static DRA818* DRA818::configure(SoftwareSerial*, uint8_t, float, float, uint8_t, uint8_t, uint8_t, uint8_t, uint8_t, bool, bool, bool, Stream*)' [-fpermissive]
 static DRA818* DRA818::configure(SoftwareSerial *stream, uint8_t type, float freq_rx, float freq_tx, uint8_t squelch, uint8_t volume, uint8_t ctcss_rx, uint8_t ctcss_tx, uint8_t bandwidth, bool pre, bool high, bool low, Stream *log = NULL) {
                                                                                                                                                                                                                                               ^
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DRA818/src/DRA818.cpp:22:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DRA818/src/DRA818.h:62:24: note: previous specification in 'static DRA818* DRA818::configure(SoftwareSerial*, uint8_t, float, float, uint8_t, uint8_t, uint8_t, uint8_t, uint8_t, bool, bool, bool, Stream*)' here
         static DRA818* configure(SoftwareSerial *stream, uint8_t type, float freq_rx, float freq_tx, uint8_t squelch, uint8_t volume, uint8_t ctcss_rx, uint8_t ctcss_tx, uint8_t bandwidth, bool pre, bool high, bool low, Stream *log = NULL);
                        ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DRA818/src/DRA818.cpp:190:239: error: cannot declare member function 'static DRA818* DRA818::configure(SoftwareSerial*, uint8_t, float, float, uint8_t, uint8_t, uint8_t, uint8_t, uint8_t, bool, bool, bool, Stream*)' to have static linkage [-fpermissive]
 static DRA818* DRA818::configure(SoftwareSerial *stream, uint8_t type, float freq_rx, float freq_tx, uint8_t squelch, uint8_t volume, uint8_t ctcss_rx, uint8_t ctcss_tx, uint8_t bandwidth, bool pre, bool high, bool low, Stream *log = NULL) {
                                                                                                                                                                                                                                               ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DRA818/src/DRA818.cpp:195:239: error: default argument given for parameter 13 of 'static DRA818* DRA818::configure(HardwareSerial*, uint8_t, float, float, uint8_t, uint8_t, uint8_t, uint8_t, uint8_t, bool, bool, bool, Stream*)' [-fpermissive]
 static DRA818* DRA818::configure(HardwareSerial *stream, uint8_t type, float freq_rx, float freq_tx, uint8_t squelch, uint8_t volume, uint8_t ctcss_rx, uint8_t ctcss_tx, uint8_t bandwidth, bool pre, bool high, bool low, Stream *log = NULL) {
                                                                                                                                                                                                                                               ^
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DRA818/src/DRA818.cpp:22:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DRA818/src/DRA818.h:63:24: note: previous specification in 'static DRA818* DRA818::configure(HardwareSerial*, uint8_t, float, float, uint8_t, uint8_t, uint8_t, uint8_t, uint8_t, bool, bool, bool, Stream*)' here
         static DRA818* configure(HardwareSerial *stream, uint8_t type, float freq_rx, float freq_tx, uint8_t squelch, uint8_t volume, uint8_t ctcss_rx, uint8_t ctcss_tx, uint8_t bandwidth, bool pre, bool high, bool low, Stream *log = NULL);
                        ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DRA818/src/DRA818.cpp:195:239: error: cannot declare member function 'static DRA818* DRA818::configure(HardwareSerial*, uint8_t, float, float, uint8_t, uint8_t, uint8_t, uint8_t, uint8_t, bool, bool, bool, Stream*)' to have static linkage [-fpermissive]
 static DRA818* DRA818::configure(HardwareSerial *stream, uint8_t type, float freq_rx, float freq_tx, uint8_t squelch, uint8_t volume, uint8_t ctcss_rx, uint8_t ctcss_tx, uint8_t bandwidth, bool pre, bool high, bool low, Stream *log = NULL) {
                                                                                                                                                                                                                                               ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DRA818/src/DRA818.cpp:200:214: error: default argument given for parameter 12 of 'static DRA818* DRA818::configure(DRA818*, float, float, uint8_t, uint8_t, uint8_t, uint8_t, uint8_t, bool, bool, bool, Stream*)' [-fpermissive]
 static DRA818* DRA818::configure(DRA818 *dra, float freq_rx, float freq_tx, uint8_t squelch, uint8_t volume, uint8_t ctcss_rx, uint8_t ctcss_tx, uint8_t bandwidth, bool pre, bool high, bool low, Stream *log = NULL) {
                                                                                                                                                                                                                      ^
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DRA818/src/DRA818.cpp:22:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DRA818/src/DRA818.h:70:24: note: previous specification in 'static DRA818* DRA818::configure(DRA818*, float, float, uint8_t, uint8_t, uint8_t, uint8_t, uint8_t, bool, bool, bool, Stream*)' here
         static DRA818* configure(DRA818 *dra, float freq_rx, float freq_tx, uint8_t squelch, uint8_t volume, uint8_t ctcss_rx, uint8_t ctcss_tx, uint8_t bandwidth, bool pre, bool high, bool low, Stream *log = NULL);
                        ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DRA818/src/DRA818.cpp:200:214: error: cannot declare member function 'static DRA818* DRA818::configure(DRA818*, float, float, uint8_t, uint8_t, uint8_t, uint8_t, uint8_t, bool, bool, bool, Stream*)' to have static linkage [-fpermissive]
 static DRA818* DRA818::configure(DRA818 *dra, float freq_rx, float freq_tx, uint8_t squelch, uint8_t volume, uint8_t ctcss_rx, uint8_t ctcss_tx, uint8_t bandwidth, bool pre, bool high, bool low, Stream *log = NULL) {
                                                                                                                                                                                                                      ^
Multiple libraries were found for "SoftwareSerial.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EspSoftwareSerial
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Printoo_Library
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Dabble