DigitalIO - compatibility matrix

This report was generated on Wednesday, 23-Feb-22 22:48:15 CET using arduino-testlib.

DigitalIO

Version: 1.0.0
More details

Compatibility matrix

Board	Claims compatibility	Inclusion	testSoftSPI	GpioPinMap	PinIOConfigToggle	testFastDigital	testPinIO	DigitalPinConfigToggle	DigitalPinShiftOut	testArduino	DigitalPinBlink	PinIOBegin	PinIOReadWrite	ScanI2cBus	SoftDS1307Utility	testDigitalPin	DigitalPinReadWrite
arduino:avr:uno 1.8.4	Yes	PASS	PASS	PASS	PASS	PASS	PASS	PASS	PASS	PASS	PASS	PASS	PASS	PASS	PASS	PASS	PASS
arduino:mbed_nano:nanorp2040connect 2.7.2	Yes ⚠️	FAIL	FAIL	FAIL	FAIL	FAIL	FAIL	FAIL	FAIL	PASS	FAIL	FAIL	FAIL	FAIL	FAIL	FAIL	FAIL
arduino:megaavr:nona4809 1.8.7	Yes ⚠️	FAIL	FAIL	PASS	FAIL	FAIL	FAIL	FAIL	FAIL	PASS	FAIL	FAIL	FAIL	FAIL	FAIL	FAIL	FAIL
arduino:samd:mkrwifi1010 1.8.12	Yes ⚠️	FAIL	FAIL	FAIL	FAIL	FAIL	FAIL	FAIL	FAIL	PASS	FAIL	FAIL	FAIL	FAIL	FAIL	FAIL	FAIL
esp32:esp32:d1_mini32 1.0.6	Yes ⚠️	FAIL	FAIL	PASS	FAIL	FAIL	FAIL	FAIL	FAIL	PASS	FAIL	FAIL	FAIL	FAIL	FAIL	FAIL	FAIL

Compilation logs

arduino:avr:uno @ 1.8.4

Inclusion

Result: PASS

Sketch uses 444 bytes (1%) of program storage space. Maximum is 32256 bytes.
Global variables use 9 bytes (0%) of dynamic memory, leaving 2039 bytes for local variables. Maximum is 2048 bytes.

examples/DigitalPinBlink

Result: PASS

Sketch uses 594 bytes (1%) of program storage space. Maximum is 32256 bytes.
Global variables use 9 bytes (0%) of dynamic memory, leaving 2039 bytes for local variables. Maximum is 2048 bytes.

examples/DigitalPinConfigToggle

Result: PASS

Sketch uses 650 bytes (2%) of program storage space. Maximum is 32256 bytes.
Global variables use 9 bytes (0%) of dynamic memory, leaving 2039 bytes for local variables. Maximum is 2048 bytes.

examples/DigitalPinReadWrite

Result: PASS

Sketch uses 460 bytes (1%) of program storage space. Maximum is 32256 bytes.
Global variables use 9 bytes (0%) of dynamic memory, leaving 2039 bytes for local variables. Maximum is 2048 bytes.

examples/DigitalPinShiftOut

Result: PASS

Sketch uses 646 bytes (2%) of program storage space. Maximum is 32256 bytes.
Global variables use 9 bytes (0%) of dynamic memory, leaving 2039 bytes for local variables. Maximum is 2048 bytes.

examples/GpioPinMap

Result: PASS

Sketch uses 2134 bytes (6%) of program storage space. Maximum is 32256 bytes.
Global variables use 346 bytes (16%) of dynamic memory, leaving 1702 bytes for local variables. Maximum is 2048 bytes.

examples/PinIOBegin

Result: PASS

Sketch uses 792 bytes (2%) of program storage space. Maximum is 32256 bytes.
Global variables use 21 bytes (1%) of dynamic memory, leaving 2027 bytes for local variables. Maximum is 2048 bytes.

examples/PinIOConfigToggle

Result: PASS

Sketch uses 858 bytes (2%) of program storage space. Maximum is 32256 bytes.
Global variables use 15 bytes (0%) of dynamic memory, leaving 2033 bytes for local variables. Maximum is 2048 bytes.

examples/PinIOReadWrite

Result: PASS

Sketch uses 782 bytes (2%) of program storage space. Maximum is 32256 bytes.
Global variables use 21 bytes (1%) of dynamic memory, leaving 2027 bytes for local variables. Maximum is 2048 bytes.

examples/ScanI2cBus

Result: PASS

Sketch uses 3196 bytes (9%) of program storage space. Maximum is 32256 bytes.
Global variables use 405 bytes (19%) of dynamic memory, leaving 1643 bytes for local variables. Maximum is 2048 bytes.

examples/SoftDS1307Utility

Result: PASS

Sketch uses 5178 bytes (16%) of program storage space. Maximum is 32256 bytes.
Global variables use 251 bytes (12%) of dynamic memory, leaving 1797 bytes for local variables. Maximum is 2048 bytes.

examples/testArduino

Result: PASS

Sketch uses 850 bytes (2%) of program storage space. Maximum is 32256 bytes.
Global variables use 9 bytes (0%) of dynamic memory, leaving 2039 bytes for local variables. Maximum is 2048 bytes.

examples/testDigitalPin

Result: PASS

Sketch uses 562 bytes (1%) of program storage space. Maximum is 32256 bytes.
Global variables use 9 bytes (0%) of dynamic memory, leaving 2039 bytes for local variables. Maximum is 2048 bytes.

examples/testFastDigital

Result: PASS

Sketch uses 558 bytes (1%) of program storage space. Maximum is 32256 bytes.
Global variables use 9 bytes (0%) of dynamic memory, leaving 2039 bytes for local variables. Maximum is 2048 bytes.

examples/testPinIO

Result: PASS

Sketch uses 834 bytes (2%) of program storage space. Maximum is 32256 bytes.
Global variables use 15 bytes (0%) of dynamic memory, leaving 2033 bytes for local variables. Maximum is 2048 bytes.

examples/testSoftSPI

Result: PASS

Sketch uses 2350 bytes (7%) of program storage space. Maximum is 32256 bytes.
Global variables use 264 bytes (12%) of dynamic memory, leaving 1784 bytes for local variables. Maximum is 2048 bytes.

arduino:mbed_nano:nanorp2040connect @ 2.7.2

Inclusion

Result: FAIL

In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/DigitalIO.h:31:0,
                 from /tmp/arduino-testlib3904942956/test/test.ino:1:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/DigitalPin.h:278:25: error: variable or field 'fastPinMode' declared void
 inline void fastPinMode(pin, mode) {
                         ^~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/DigitalPin.h:278:25: error: 'pin' was not declared in this scope
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/DigitalPin.h:278:25: note: suggested alternative: 'min'
 inline void fastPinMode(pin, mode) {
                         ^~~
                         min
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/DigitalPin.h:278:30: error: 'mode' was not declared in this scope
 inline void fastPinMode(pin, mode) {
                              ^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/DigitalPin.h:278:30: note: suggested alternative: 'modf'
 inline void fastPinMode(pin, mode) {
                              ^~~~
                              modf
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/DigitalPin.h: In member function 'void DigitalPin<PinNumber>::config(uint8_t, bool)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/DigitalPin.h:290:4: error: there are no arguments to 'fastPinMode' that depend on a template parameter, so a declaration of 'fastPinMode' must be available [-fpermissive]
   {fastPinMode(pin, mode); fastDigitalWrite(pin, level);}
    ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/DigitalPin.h:328:5: note: in expansion of macro 'fastPinConfig'
     fastPinConfig(PinNumber, mode, level);
     ^~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/DigitalPin.h:290:4: note: (if you use '-fpermissive', G++ will accept your code, but allowing the use of an undeclared name is deprecated)
   {fastPinMode(pin, mode); fastDigitalWrite(pin, level);}
    ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/DigitalPin.h:328:5: note: in expansion of macro 'fastPinConfig'
     fastPinConfig(PinNumber, mode, level);
     ^~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/DigitalPin.h: In member function 'void DigitalPin<PinNumber>::mode(uint8_t)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/DigitalPin.h:352:5: error: there are no arguments to 'fastPinMode' that depend on a template parameter, so a declaration of 'fastPinMode' must be available [-fpermissive]
     fastPinMode(PinNumber, mode);
     ^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/SoftSPI.h: In member function 'void SoftSPI<MisoPin, MosiPin, SckPin, Mode>::begin()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/DigitalPin.h:290:4: error: there are no arguments to 'fastPinMode' that depend on a template parameter, so a declaration of 'fastPinMode' must be available [-fpermissive]
   {fastPinMode(pin, mode); fastDigitalWrite(pin, level);}
    ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/SoftSPI.h:55:5: note: in expansion of macro 'fastPinConfig'
     fastPinConfig(MisoPin, MISO_MODE, MISO_LEVEL);
     ^~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/DigitalPin.h:290:4: error: there are no arguments to 'fastPinMode' that depend on a template parameter, so a declaration of 'fastPinMode' must be available [-fpermissive]
   {fastPinMode(pin, mode); fastDigitalWrite(pin, level);}
    ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/SoftSPI.h:56:5: note: in expansion of macro 'fastPinConfig'
     fastPinConfig(MosiPin, MOSI_MODE, !MODE_CPHA(Mode));
     ^~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/DigitalPin.h:290:4: error: there are no arguments to 'fastPinMode' that depend on a template parameter, so a declaration of 'fastPinMode' must be available [-fpermissive]
   {fastPinMode(pin, mode); fastDigitalWrite(pin, level);}
    ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/SoftSPI.h:57:5: note: in expansion of macro 'fastPinConfig'
     fastPinConfig(SckPin, SCK_MODE, MODE_CPOL(Mode));
     ^~~~~~~~~~~~~

examples/DigitalPinBlink

Result: FAIL

In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/DigitalIO.h:31:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/examples/DigitalPinBlink/DigitalPinBlink.ino:2:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/DigitalPin.h:278:25: error: variable or field 'fastPinMode' declared void
 inline void fastPinMode(pin, mode) {
                         ^~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/DigitalPin.h:278:25: error: 'pin' was not declared in this scope
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/DigitalPin.h:278:25: note: suggested alternative: 'min'
 inline void fastPinMode(pin, mode) {
                         ^~~
                         min
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/DigitalPin.h:278:30: error: 'mode' was not declared in this scope
 inline void fastPinMode(pin, mode) {
                              ^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/DigitalPin.h:278:30: note: suggested alternative: 'modf'
 inline void fastPinMode(pin, mode) {
                              ^~~~
                              modf
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/DigitalPin.h: In member function 'void DigitalPin<PinNumber>::config(uint8_t, bool)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/DigitalPin.h:290:4: error: there are no arguments to 'fastPinMode' that depend on a template parameter, so a declaration of 'fastPinMode' must be available [-fpermissive]
   {fastPinMode(pin, mode); fastDigitalWrite(pin, level);}
    ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/DigitalPin.h:328:5: note: in expansion of macro 'fastPinConfig'
     fastPinConfig(PinNumber, mode, level);
     ^~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/DigitalPin.h:290:4: note: (if you use '-fpermissive', G++ will accept your code, but allowing the use of an undeclared name is deprecated)
   {fastPinMode(pin, mode); fastDigitalWrite(pin, level);}
    ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/DigitalPin.h:328:5: note: in expansion of macro 'fastPinConfig'
     fastPinConfig(PinNumber, mode, level);
     ^~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/DigitalPin.h: In member function 'void DigitalPin<PinNumber>::mode(uint8_t)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/DigitalPin.h:352:5: error: there are no arguments to 'fastPinMode' that depend on a template parameter, so a declaration of 'fastPinMode' must be available [-fpermissive]
     fastPinMode(PinNumber, mode);
     ^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/SoftSPI.h: In member function 'void SoftSPI<MisoPin, MosiPin, SckPin, Mode>::begin()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/DigitalPin.h:290:4: error: there are no arguments to 'fastPinMode' that depend on a template parameter, so a declaration of 'fastPinMode' must be available [-fpermissive]
   {fastPinMode(pin, mode); fastDigitalWrite(pin, level);}
    ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/SoftSPI.h:55:5: note: in expansion of macro 'fastPinConfig'
     fastPinConfig(MisoPin, MISO_MODE, MISO_LEVEL);
     ^~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/DigitalPin.h:290:4: error: there are no arguments to 'fastPinMode' that depend on a template parameter, so a declaration of 'fastPinMode' must be available [-fpermissive]
   {fastPinMode(pin, mode); fastDigitalWrite(pin, level);}
    ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/SoftSPI.h:56:5: note: in expansion of macro 'fastPinConfig'
     fastPinConfig(MosiPin, MOSI_MODE, !MODE_CPHA(Mode));
     ^~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/DigitalPin.h:290:4: error: there are no arguments to 'fastPinMode' that depend on a template parameter, so a declaration of 'fastPinMode' must be available [-fpermissive]
   {fastPinMode(pin, mode); fastDigitalWrite(pin, level);}
    ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/SoftSPI.h:57:5: note: in expansion of macro 'fastPinConfig'
     fastPinConfig(SckPin, SCK_MODE, MODE_CPOL(Mode));
     ^~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/DigitalPin.h: In instantiation of 'void DigitalPin<PinNumber>::mode(uint8_t) [with unsigned char PinNumber = 13; uint8_t = unsigned char]':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/examples/DigitalPinBlink/DigitalPinBlink.ino:7:19:   required from here
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/DigitalPin.h:352:16: error: 'fastPinMode' was not declared in this scope
     fastPinMode(PinNumber, mode);
     ~~~~~~~~~~~^~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/DigitalPin.h:352:16: note: suggested alternative: 'PinMode'
     fastPinMode(PinNumber, mode);
     ~~~~~~~~~~~^~~~~~~~~~~~~~~~~
     PinMode

examples/DigitalPinConfigToggle

Result: FAIL

In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/DigitalIO.h:31:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/examples/DigitalPinConfigToggle/DigitalPinConfigToggle.ino:2:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/DigitalPin.h:278:25: error: variable or field 'fastPinMode' declared void
 inline void fastPinMode(pin, mode) {
                         ^~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/DigitalPin.h:278:25: error: 'pin' was not declared in this scope
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/DigitalPin.h:278:25: note: suggested alternative: 'min'
 inline void fastPinMode(pin, mode) {
                         ^~~
                         min
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/DigitalPin.h:278:30: error: 'mode' was not declared in this scope
 inline void fastPinMode(pin, mode) {
                              ^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/DigitalPin.h:278:30: note: suggested alternative: 'modf'
 inline void fastPinMode(pin, mode) {
                              ^~~~
                              modf
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/DigitalPin.h: In member function 'void DigitalPin<PinNumber>::config(uint8_t, bool)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/DigitalPin.h:290:4: error: there are no arguments to 'fastPinMode' that depend on a template parameter, so a declaration of 'fastPinMode' must be available [-fpermissive]
   {fastPinMode(pin, mode); fastDigitalWrite(pin, level);}
    ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/DigitalPin.h:328:5: note: in expansion of macro 'fastPinConfig'
     fastPinConfig(PinNumber, mode, level);
     ^~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/DigitalPin.h:290:4: note: (if you use '-fpermissive', G++ will accept your code, but allowing the use of an undeclared name is deprecated)
   {fastPinMode(pin, mode); fastDigitalWrite(pin, level);}
    ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/DigitalPin.h:328:5: note: in expansion of macro 'fastPinConfig'
     fastPinConfig(PinNumber, mode, level);
     ^~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/DigitalPin.h: In member function 'void DigitalPin<PinNumber>::mode(uint8_t)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/DigitalPin.h:352:5: error: there are no arguments to 'fastPinMode' that depend on a template parameter, so a declaration of 'fastPinMode' must be available [-fpermissive]
     fastPinMode(PinNumber, mode);
     ^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/SoftSPI.h: In member function 'void SoftSPI<MisoPin, MosiPin, SckPin, Mode>::begin()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/DigitalPin.h:290:4: error: there are no arguments to 'fastPinMode' that depend on a template parameter, so a declaration of 'fastPinMode' must be available [-fpermissive]
   {fastPinMode(pin, mode); fastDigitalWrite(pin, level);}
    ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/SoftSPI.h:55:5: note: in expansion of macro 'fastPinConfig'
     fastPinConfig(MisoPin, MISO_MODE, MISO_LEVEL);
     ^~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/DigitalPin.h:290:4: error: there are no arguments to 'fastPinMode' that depend on a template parameter, so a declaration of 'fastPinMode' must be available [-fpermissive]
   {fastPinMode(pin, mode); fastDigitalWrite(pin, level);}
    ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/SoftSPI.h:56:5: note: in expansion of macro 'fastPinConfig'
     fastPinConfig(MosiPin, MOSI_MODE, !MODE_CPHA(Mode));
     ^~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/DigitalPin.h:290:4: error: there are no arguments to 'fastPinMode' that depend on a template parameter, so a declaration of 'fastPinMode' must be available [-fpermissive]
   {fastPinMode(pin, mode); fastDigitalWrite(pin, level);}
    ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/SoftSPI.h:57:5: note: in expansion of macro 'fastPinConfig'
     fastPinConfig(SckPin, SCK_MODE, MODE_CPOL(Mode));
     ^~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/DigitalPin.h: In instantiation of 'void DigitalPin<PinNumber>::config(uint8_t, bool) [with unsigned char PinNumber = 13; uint8_t = unsigned char]':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/examples/DigitalPinConfigToggle/DigitalPinConfigToggle.ino:9:27:   required from here
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/DigitalPin.h:290:15: error: 'fastPinMode' was not declared in this scope
   {fastPinMode(pin, mode); fastDigitalWrite(pin, level);}
    ~~~~~~~~~~~^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/DigitalPin.h:328:5: note: in expansion of macro 'fastPinConfig'
     fastPinConfig(PinNumber, mode, level);
     ^~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/DigitalPin.h:290:15: note: suggested alternative: 'PinMode'
   {fastPinMode(pin, mode); fastDigitalWrite(pin, level);}
    ~~~~~~~~~~~^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/DigitalPin.h:328:5: note: in expansion of macro 'fastPinConfig'
     fastPinConfig(PinNumber, mode, level);
     ^~~~~~~~~~~~~

examples/DigitalPinReadWrite

Result: FAIL

In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/DigitalIO.h:31:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/examples/DigitalPinReadWrite/DigitalPinReadWrite.ino:2:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/DigitalPin.h:278:25: error: variable or field 'fastPinMode' declared void
 inline void fastPinMode(pin, mode) {
                         ^~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/DigitalPin.h:278:25: error: 'pin' was not declared in this scope
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/DigitalPin.h:278:25: note: suggested alternative: 'min'
 inline void fastPinMode(pin, mode) {
                         ^~~
                         min
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/DigitalPin.h:278:30: error: 'mode' was not declared in this scope
 inline void fastPinMode(pin, mode) {
                              ^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/DigitalPin.h:278:30: note: suggested alternative: 'modf'
 inline void fastPinMode(pin, mode) {
                              ^~~~
                              modf
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/DigitalPin.h: In member function 'void DigitalPin<PinNumber>::config(uint8_t, bool)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/DigitalPin.h:290:4: error: there are no arguments to 'fastPinMode' that depend on a template parameter, so a declaration of 'fastPinMode' must be available [-fpermissive]
   {fastPinMode(pin, mode); fastDigitalWrite(pin, level);}
    ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/DigitalPin.h:328:5: note: in expansion of macro 'fastPinConfig'
     fastPinConfig(PinNumber, mode, level);
     ^~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/DigitalPin.h:290:4: note: (if you use '-fpermissive', G++ will accept your code, but allowing the use of an undeclared name is deprecated)
   {fastPinMode(pin, mode); fastDigitalWrite(pin, level);}
    ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/DigitalPin.h:328:5: note: in expansion of macro 'fastPinConfig'
     fastPinConfig(PinNumber, mode, level);
     ^~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/DigitalPin.h: In member function 'void DigitalPin<PinNumber>::mode(uint8_t)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/DigitalPin.h:352:5: error: there are no arguments to 'fastPinMode' that depend on a template parameter, so a declaration of 'fastPinMode' must be available [-fpermissive]
     fastPinMode(PinNumber, mode);
     ^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/SoftSPI.h: In member function 'void SoftSPI<MisoPin, MosiPin, SckPin, Mode>::begin()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/DigitalPin.h:290:4: error: there are no arguments to 'fastPinMode' that depend on a template parameter, so a declaration of 'fastPinMode' must be available [-fpermissive]
   {fastPinMode(pin, mode); fastDigitalWrite(pin, level);}
    ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/SoftSPI.h:55:5: note: in expansion of macro 'fastPinConfig'
     fastPinConfig(MisoPin, MISO_MODE, MISO_LEVEL);
     ^~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/DigitalPin.h:290:4: error: there are no arguments to 'fastPinMode' that depend on a template parameter, so a declaration of 'fastPinMode' must be available [-fpermissive]
   {fastPinMode(pin, mode); fastDigitalWrite(pin, level);}
    ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/SoftSPI.h:56:5: note: in expansion of macro 'fastPinConfig'
     fastPinConfig(MosiPin, MOSI_MODE, !MODE_CPHA(Mode));
     ^~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/DigitalPin.h:290:4: error: there are no arguments to 'fastPinMode' that depend on a template parameter, so a declaration of 'fastPinMode' must be available [-fpermissive]
   {fastPinMode(pin, mode); fastDigitalWrite(pin, level);}
    ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/SoftSPI.h:57:5: note: in expansion of macro 'fastPinConfig'
     fastPinConfig(SckPin, SCK_MODE, MODE_CPOL(Mode));
     ^~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/DigitalPin.h: In instantiation of 'void DigitalPin<PinNumber>::mode(uint8_t) [with unsigned char PinNumber = 12; uint8_t = unsigned char]':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/examples/DigitalPinReadWrite/DigitalPinReadWrite.ino:8:19:   required from here
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/DigitalPin.h:352:16: error: 'fastPinMode' was not declared in this scope
     fastPinMode(PinNumber, mode);
     ~~~~~~~~~~~^~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/DigitalPin.h:352:16: note: suggested alternative: 'PinMode'
     fastPinMode(PinNumber, mode);
     ~~~~~~~~~~~^~~~~~~~~~~~~~~~~
     PinMode
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/DigitalPin.h: In instantiation of 'void DigitalPin<PinNumber>::mode(uint8_t) [with unsigned char PinNumber = 13; uint8_t = unsigned char]':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/examples/DigitalPinReadWrite/DigitalPinReadWrite.ino:9:20:   required from here
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/DigitalPin.h:352:16: error: 'fastPinMode' was not declared in this scope
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/DigitalPin.h:352:16: note: suggested alternative: 'PinMode'
     fastPinMode(PinNumber, mode);
     ~~~~~~~~~~~^~~~~~~~~~~~~~~~~
     PinMode

examples/DigitalPinShiftOut

Result: FAIL

In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/DigitalIO.h:31:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/examples/DigitalPinShiftOut/DigitalPinShiftOut.ino:2:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/DigitalPin.h:278:25: error: variable or field 'fastPinMode' declared void
 inline void fastPinMode(pin, mode) {
                         ^~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/DigitalPin.h:278:25: error: 'pin' was not declared in this scope
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/DigitalPin.h:278:25: note: suggested alternative: 'min'
 inline void fastPinMode(pin, mode) {
                         ^~~
                         min
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/DigitalPin.h:278:30: error: 'mode' was not declared in this scope
 inline void fastPinMode(pin, mode) {
                              ^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/DigitalPin.h:278:30: note: suggested alternative: 'modf'
 inline void fastPinMode(pin, mode) {
                              ^~~~
                              modf
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/DigitalPin.h: In member function 'void DigitalPin<PinNumber>::config(uint8_t, bool)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/DigitalPin.h:290:4: error: there are no arguments to 'fastPinMode' that depend on a template parameter, so a declaration of 'fastPinMode' must be available [-fpermissive]
   {fastPinMode(pin, mode); fastDigitalWrite(pin, level);}
    ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/DigitalPin.h:328:5: note: in expansion of macro 'fastPinConfig'
     fastPinConfig(PinNumber, mode, level);
     ^~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/DigitalPin.h:290:4: note: (if you use '-fpermissive', G++ will accept your code, but allowing the use of an undeclared name is deprecated)
   {fastPinMode(pin, mode); fastDigitalWrite(pin, level);}
    ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/DigitalPin.h:328:5: note: in expansion of macro 'fastPinConfig'
     fastPinConfig(PinNumber, mode, level);
     ^~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/DigitalPin.h: In member function 'void DigitalPin<PinNumber>::mode(uint8_t)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/DigitalPin.h:352:5: error: there are no arguments to 'fastPinMode' that depend on a template parameter, so a declaration of 'fastPinMode' must be available [-fpermissive]
     fastPinMode(PinNumber, mode);
     ^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/SoftSPI.h: In member function 'void SoftSPI<MisoPin, MosiPin, SckPin, Mode>::begin()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/DigitalPin.h:290:4: error: there are no arguments to 'fastPinMode' that depend on a template parameter, so a declaration of 'fastPinMode' must be available [-fpermissive]
   {fastPinMode(pin, mode); fastDigitalWrite(pin, level);}
    ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/SoftSPI.h:55:5: note: in expansion of macro 'fastPinConfig'
     fastPinConfig(MisoPin, MISO_MODE, MISO_LEVEL);
     ^~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/DigitalPin.h:290:4: error: there are no arguments to 'fastPinMode' that depend on a template parameter, so a declaration of 'fastPinMode' must be available [-fpermissive]
   {fastPinMode(pin, mode); fastDigitalWrite(pin, level);}
    ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/SoftSPI.h:56:5: note: in expansion of macro 'fastPinConfig'
     fastPinConfig(MosiPin, MOSI_MODE, !MODE_CPHA(Mode));
     ^~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/DigitalPin.h:290:4: error: there are no arguments to 'fastPinMode' that depend on a template parameter, so a declaration of 'fastPinMode' must be available [-fpermissive]
   {fastPinMode(pin, mode); fastDigitalWrite(pin, level);}
    ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/SoftSPI.h:57:5: note: in expansion of macro 'fastPinConfig'
     fastPinConfig(SckPin, SCK_MODE, MODE_CPOL(Mode));
     ^~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/DigitalPin.h: In instantiation of 'void DigitalPin<PinNumber>::config(uint8_t, bool) [with unsigned char PinNumber = 12; uint8_t = unsigned char]':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/examples/DigitalPinShiftOut/DigitalPinShiftOut.ino:30:30:   required from here
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/DigitalPin.h:290:15: error: 'fastPinMode' was not declared in this scope
   {fastPinMode(pin, mode); fastDigitalWrite(pin, level);}
    ~~~~~~~~~~~^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/DigitalPin.h:328:5: note: in expansion of macro 'fastPinConfig'
     fastPinConfig(PinNumber, mode, level);
     ^~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/DigitalPin.h:290:15: note: suggested alternative: 'PinMode'
   {fastPinMode(pin, mode); fastDigitalWrite(pin, level);}
    ~~~~~~~~~~~^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/DigitalPin.h:328:5: note: in expansion of macro 'fastPinConfig'
     fastPinConfig(PinNumber, mode, level);
     ^~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/DigitalPin.h: In instantiation of 'void DigitalPin<PinNumber>::config(uint8_t, bool) [with unsigned char PinNumber = 13; uint8_t = unsigned char]':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/examples/DigitalPinShiftOut/DigitalPinShiftOut.ino:33:30:   required from here
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/DigitalPin.h:290:15: error: 'fastPinMode' was not declared in this scope
   {fastPinMode(pin, mode); fastDigitalWrite(pin, level);}
    ~~~~~~~~~~~^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/DigitalPin.h:328:5: note: in expansion of macro 'fastPinConfig'
     fastPinConfig(PinNumber, mode, level);
     ^~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/DigitalPin.h:290:15: note: suggested alternative: 'PinMode'
   {fastPinMode(pin, mode); fastDigitalWrite(pin, level);}
    ~~~~~~~~~~~^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/DigitalPin.h:328:5: note: in expansion of macro 'fastPinConfig'
     fastPinConfig(PinNumber, mode, level);
     ^~~~~~~~~~~~~

examples/GpioPinMap

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/examples/GpioPinMap/GpioPinMap.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/examples/GpioPinMap/GpioPinMap.ino:15:13: error: 'digitalPinToBitMask' was not declared in this scope
     int m = digitalPinToBitMask(i);
             ^~~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/examples/GpioPinMap/GpioPinMap.ino:15:13: note: suggested alternative: 'digitalPinToPinName'
     int m = digitalPinToBitMask(i);
             ^~~~~~~~~~~~~~~~~~~
             digitalPinToPinName

examples/PinIOBegin

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/examples/PinIOBegin/PinIOBegin.ino:27:2: error: #error AVR only example
 #error AVR only example
  ^~~~~

examples/PinIOConfigToggle

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/examples/PinIOConfigToggle/PinIOConfigToggle.ino:19:2: error: #error AVR only example
 #error AVR only example
  ^~~~~

examples/PinIOReadWrite

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/examples/PinIOReadWrite/PinIOReadWrite.ino:19:2: error: #error AVR only example
 #error AVR only example
  ^~~~~

examples/ScanI2cBus

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/examples/ScanI2cBus/ScanI2cBus.ino:78:2: error: #error AVR only example
 #error AVR only example
  ^~~~~

examples/SoftDS1307Utility

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/examples/SoftDS1307Utility/SoftDS1307Utility.ino:325:2: error: #error AVR only example
 #error AVR only example
  ^~~~~

examples/testArduino

Result: PASS

Sketch uses 79138 bytes (0%) of program storage space. Maximum is 16777216 bytes.
Global variables use 43444 bytes (16%) of dynamic memory, leaving 226892 bytes for local variables. Maximum is 270336 bytes.

examples/testDigitalPin

Result: FAIL

In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/DigitalIO.h:31:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/examples/testDigitalPin/testDigitalPin.ino:2:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/DigitalPin.h:278:25: error: variable or field 'fastPinMode' declared void
 inline void fastPinMode(pin, mode) {
                         ^~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/DigitalPin.h:278:25: error: 'pin' was not declared in this scope
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/DigitalPin.h:278:25: note: suggested alternative: 'min'
 inline void fastPinMode(pin, mode) {
                         ^~~
                         min
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/DigitalPin.h:278:30: error: 'mode' was not declared in this scope
 inline void fastPinMode(pin, mode) {
                              ^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/DigitalPin.h:278:30: note: suggested alternative: 'modf'
 inline void fastPinMode(pin, mode) {
                              ^~~~
                              modf
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/DigitalPin.h: In member function 'void DigitalPin<PinNumber>::config(uint8_t, bool)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/DigitalPin.h:290:4: error: there are no arguments to 'fastPinMode' that depend on a template parameter, so a declaration of 'fastPinMode' must be available [-fpermissive]
   {fastPinMode(pin, mode); fastDigitalWrite(pin, level);}
    ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/DigitalPin.h:328:5: note: in expansion of macro 'fastPinConfig'
     fastPinConfig(PinNumber, mode, level);
     ^~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/DigitalPin.h:290:4: note: (if you use '-fpermissive', G++ will accept your code, but allowing the use of an undeclared name is deprecated)
   {fastPinMode(pin, mode); fastDigitalWrite(pin, level);}
    ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/DigitalPin.h:328:5: note: in expansion of macro 'fastPinConfig'
     fastPinConfig(PinNumber, mode, level);
     ^~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/DigitalPin.h: In member function 'void DigitalPin<PinNumber>::mode(uint8_t)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/DigitalPin.h:352:5: error: there are no arguments to 'fastPinMode' that depend on a template parameter, so a declaration of 'fastPinMode' must be available [-fpermissive]
     fastPinMode(PinNumber, mode);
     ^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/SoftSPI.h: In member function 'void SoftSPI<MisoPin, MosiPin, SckPin, Mode>::begin()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/DigitalPin.h:290:4: error: there are no arguments to 'fastPinMode' that depend on a template parameter, so a declaration of 'fastPinMode' must be available [-fpermissive]
   {fastPinMode(pin, mode); fastDigitalWrite(pin, level);}
    ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/SoftSPI.h:55:5: note: in expansion of macro 'fastPinConfig'
     fastPinConfig(MisoPin, MISO_MODE, MISO_LEVEL);
     ^~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/DigitalPin.h:290:4: error: there are no arguments to 'fastPinMode' that depend on a template parameter, so a declaration of 'fastPinMode' must be available [-fpermissive]
   {fastPinMode(pin, mode); fastDigitalWrite(pin, level);}
    ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/SoftSPI.h:56:5: note: in expansion of macro 'fastPinConfig'
     fastPinConfig(MosiPin, MOSI_MODE, !MODE_CPHA(Mode));
     ^~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/DigitalPin.h:290:4: error: there are no arguments to 'fastPinMode' that depend on a template parameter, so a declaration of 'fastPinMode' must be available [-fpermissive]
   {fastPinMode(pin, mode); fastDigitalWrite(pin, level);}
    ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/SoftSPI.h:57:5: note: in expansion of macro 'fastPinConfig'
     fastPinConfig(SckPin, SCK_MODE, MODE_CPOL(Mode));
     ^~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/DigitalPin.h: In instantiation of 'void DigitalPin<PinNumber>::mode(uint8_t) [with unsigned char PinNumber = 13; uint8_t = unsigned char]':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/examples/testDigitalPin/testDigitalPin.ino:9:20:   required from here
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/DigitalPin.h:352:16: error: 'fastPinMode' was not declared in this scope
     fastPinMode(PinNumber, mode);
     ~~~~~~~~~~~^~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/DigitalPin.h:352:16: note: suggested alternative: 'PinMode'
     fastPinMode(PinNumber, mode);
     ~~~~~~~~~~~^~~~~~~~~~~~~~~~~
     PinMode

examples/testFastDigital

Result: FAIL

In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/DigitalIO.h:31:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/examples/testFastDigital/testFastDigital.ino:2:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/DigitalPin.h:278:25: error: variable or field 'fastPinMode' declared void
 inline void fastPinMode(pin, mode) {
                         ^~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/DigitalPin.h:278:25: error: 'pin' was not declared in this scope
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/DigitalPin.h:278:25: note: suggested alternative: 'min'
 inline void fastPinMode(pin, mode) {
                         ^~~
                         min
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/DigitalPin.h:278:30: error: 'mode' was not declared in this scope
 inline void fastPinMode(pin, mode) {
                              ^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/DigitalPin.h:278:30: note: suggested alternative: 'modf'
 inline void fastPinMode(pin, mode) {
                              ^~~~
                              modf
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/DigitalPin.h: In member function 'void DigitalPin<PinNumber>::config(uint8_t, bool)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/DigitalPin.h:290:4: error: there are no arguments to 'fastPinMode' that depend on a template parameter, so a declaration of 'fastPinMode' must be available [-fpermissive]
   {fastPinMode(pin, mode); fastDigitalWrite(pin, level);}
    ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/DigitalPin.h:328:5: note: in expansion of macro 'fastPinConfig'
     fastPinConfig(PinNumber, mode, level);
     ^~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/DigitalPin.h:290:4: note: (if you use '-fpermissive', G++ will accept your code, but allowing the use of an undeclared name is deprecated)
   {fastPinMode(pin, mode); fastDigitalWrite(pin, level);}
    ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/DigitalPin.h:328:5: note: in expansion of macro 'fastPinConfig'
     fastPinConfig(PinNumber, mode, level);
     ^~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/DigitalPin.h: In member function 'void DigitalPin<PinNumber>::mode(uint8_t)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/DigitalPin.h:352:5: error: there are no arguments to 'fastPinMode' that depend on a template parameter, so a declaration of 'fastPinMode' must be available [-fpermissive]
     fastPinMode(PinNumber, mode);
     ^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/SoftSPI.h: In member function 'void SoftSPI<MisoPin, MosiPin, SckPin, Mode>::begin()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/DigitalPin.h:290:4: error: there are no arguments to 'fastPinMode' that depend on a template parameter, so a declaration of 'fastPinMode' must be available [-fpermissive]
   {fastPinMode(pin, mode); fastDigitalWrite(pin, level);}
    ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/SoftSPI.h:55:5: note: in expansion of macro 'fastPinConfig'
     fastPinConfig(MisoPin, MISO_MODE, MISO_LEVEL);
     ^~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/DigitalPin.h:290:4: error: there are no arguments to 'fastPinMode' that depend on a template parameter, so a declaration of 'fastPinMode' must be available [-fpermissive]
   {fastPinMode(pin, mode); fastDigitalWrite(pin, level);}
    ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/SoftSPI.h:56:5: note: in expansion of macro 'fastPinConfig'
     fastPinConfig(MosiPin, MOSI_MODE, !MODE_CPHA(Mode));
     ^~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/DigitalPin.h:290:4: error: there are no arguments to 'fastPinMode' that depend on a template parameter, so a declaration of 'fastPinMode' must be available [-fpermissive]
   {fastPinMode(pin, mode); fastDigitalWrite(pin, level);}
    ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/SoftSPI.h:57:5: note: in expansion of macro 'fastPinConfig'
     fastPinConfig(SckPin, SCK_MODE, MODE_CPOL(Mode));
     ^~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/examples/testFastDigital/testFastDigital.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/examples/testFastDigital/testFastDigital.ino:5:3: error: 'fastPinMode' was not declared in this scope
   fastPinMode(PIN, OUTPUT);
   ^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/examples/testFastDigital/testFastDigital.ino:5:3: note: suggested alternative: 'PinMode'
   fastPinMode(PIN, OUTPUT);
   ^~~~~~~~~~~
   PinMode

examples/testPinIO

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/examples/testPinIO/testPinIO.ino:23:2: error: #error AVR only example
 #error AVR only example
  ^~~~~

examples/testSoftSPI

Result: FAIL

In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/DigitalIO.h:31:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/examples/testSoftSPI/testSoftSPI.ino:2:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/DigitalPin.h:278:25: error: variable or field 'fastPinMode' declared void
 inline void fastPinMode(pin, mode) {
                         ^~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/DigitalPin.h:278:25: error: 'pin' was not declared in this scope
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/DigitalPin.h:278:25: note: suggested alternative: 'min'
 inline void fastPinMode(pin, mode) {
                         ^~~
                         min
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/DigitalPin.h:278:30: error: 'mode' was not declared in this scope
 inline void fastPinMode(pin, mode) {
                              ^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/DigitalPin.h:278:30: note: suggested alternative: 'modf'
 inline void fastPinMode(pin, mode) {
                              ^~~~
                              modf
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/DigitalPin.h: In member function 'void DigitalPin<PinNumber>::config(uint8_t, bool)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/DigitalPin.h:290:4: error: there are no arguments to 'fastPinMode' that depend on a template parameter, so a declaration of 'fastPinMode' must be available [-fpermissive]
   {fastPinMode(pin, mode); fastDigitalWrite(pin, level);}
    ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/DigitalPin.h:328:5: note: in expansion of macro 'fastPinConfig'
     fastPinConfig(PinNumber, mode, level);
     ^~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/DigitalPin.h:290:4: note: (if you use '-fpermissive', G++ will accept your code, but allowing the use of an undeclared name is deprecated)
   {fastPinMode(pin, mode); fastDigitalWrite(pin, level);}
    ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/DigitalPin.h:328:5: note: in expansion of macro 'fastPinConfig'
     fastPinConfig(PinNumber, mode, level);
     ^~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/DigitalPin.h: In member function 'void DigitalPin<PinNumber>::mode(uint8_t)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/DigitalPin.h:352:5: error: there are no arguments to 'fastPinMode' that depend on a template parameter, so a declaration of 'fastPinMode' must be available [-fpermissive]
     fastPinMode(PinNumber, mode);
     ^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/SoftSPI.h: In member function 'void SoftSPI<MisoPin, MosiPin, SckPin, Mode>::begin()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/DigitalPin.h:290:4: error: there are no arguments to 'fastPinMode' that depend on a template parameter, so a declaration of 'fastPinMode' must be available [-fpermissive]
   {fastPinMode(pin, mode); fastDigitalWrite(pin, level);}
    ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/SoftSPI.h:55:5: note: in expansion of macro 'fastPinConfig'
     fastPinConfig(MisoPin, MISO_MODE, MISO_LEVEL);
     ^~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/DigitalPin.h:290:4: error: there are no arguments to 'fastPinMode' that depend on a template parameter, so a declaration of 'fastPinMode' must be available [-fpermissive]
   {fastPinMode(pin, mode); fastDigitalWrite(pin, level);}
    ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/SoftSPI.h:56:5: note: in expansion of macro 'fastPinConfig'
     fastPinConfig(MosiPin, MOSI_MODE, !MODE_CPHA(Mode));
     ^~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/DigitalPin.h:290:4: error: there are no arguments to 'fastPinMode' that depend on a template parameter, so a declaration of 'fastPinMode' must be available [-fpermissive]
   {fastPinMode(pin, mode); fastDigitalWrite(pin, level);}
    ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/SoftSPI.h:57:5: note: in expansion of macro 'fastPinConfig'
     fastPinConfig(SckPin, SCK_MODE, MODE_CPOL(Mode));
     ^~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/SoftSPI.h: In instantiation of 'void SoftSPI<MisoPin, MosiPin, SckPin, Mode>::begin() [with unsigned char MisoPin = 7; unsigned char MosiPin = 8; unsigned char SckPin = 9; unsigned char Mode = 0]':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/examples/testSoftSPI/testSoftSPI.ino:14:13:   required from here
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/DigitalPin.h:290:15: error: 'fastPinMode' was not declared in this scope
   {fastPinMode(pin, mode); fastDigitalWrite(pin, level);}
    ~~~~~~~~~~~^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/SoftSPI.h:55:5: note: in expansion of macro 'fastPinConfig'
     fastPinConfig(MisoPin, MISO_MODE, MISO_LEVEL);
     ^~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/DigitalPin.h:290:15: note: suggested alternative: 'PinMode'
   {fastPinMode(pin, mode); fastDigitalWrite(pin, level);}
    ~~~~~~~~~~~^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/SoftSPI.h:55:5: note: in expansion of macro 'fastPinConfig'
     fastPinConfig(MisoPin, MISO_MODE, MISO_LEVEL);
     ^~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/DigitalPin.h:290:15: error: 'fastPinMode' was not declared in this scope
   {fastPinMode(pin, mode); fastDigitalWrite(pin, level);}
    ~~~~~~~~~~~^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/SoftSPI.h:56:5: note: in expansion of macro 'fastPinConfig'
     fastPinConfig(MosiPin, MOSI_MODE, !MODE_CPHA(Mode));
     ^~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/DigitalPin.h:290:15: note: suggested alternative: 'PinMode'
   {fastPinMode(pin, mode); fastDigitalWrite(pin, level);}
    ~~~~~~~~~~~^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/SoftSPI.h:56:5: note: in expansion of macro 'fastPinConfig'
     fastPinConfig(MosiPin, MOSI_MODE, !MODE_CPHA(Mode));
     ^~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/DigitalPin.h:290:15: error: 'fastPinMode' was not declared in this scope
   {fastPinMode(pin, mode); fastDigitalWrite(pin, level);}
    ~~~~~~~~~~~^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/SoftSPI.h:57:5: note: in expansion of macro 'fastPinConfig'
     fastPinConfig(SckPin, SCK_MODE, MODE_CPOL(Mode));
     ^~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/DigitalPin.h:290:15: note: suggested alternative: 'PinMode'
   {fastPinMode(pin, mode); fastDigitalWrite(pin, level);}
    ~~~~~~~~~~~^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/SoftSPI.h:57:5: note: in expansion of macro 'fastPinConfig'
     fastPinConfig(SckPin, SCK_MODE, MODE_CPOL(Mode));
     ^~~~~~~~~~~~~

arduino:megaavr:nona4809 @ 1.8.7

Inclusion

Result: FAIL

In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/DigitalPin.h:44:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/DigitalIO.h:31,
                 from /tmp/arduino-testlib3904942956/test/test.ino:1:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/boards/GpioPinMap.h:62:2: error: #error Unknown board type.
 #error Unknown board type.
  ^~~~~

examples/DigitalPinBlink

Result: FAIL

In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/DigitalPin.h:44:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/DigitalIO.h:31,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/examples/DigitalPinBlink/DigitalPinBlink.ino:2:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/boards/GpioPinMap.h:62:2: error: #error Unknown board type.
 #error Unknown board type.
  ^~~~~

examples/DigitalPinConfigToggle

Result: FAIL

In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/DigitalPin.h:44:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/DigitalIO.h:31,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/examples/DigitalPinConfigToggle/DigitalPinConfigToggle.ino:2:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/boards/GpioPinMap.h:62:2: error: #error Unknown board type.
 #error Unknown board type.
  ^~~~~

examples/DigitalPinReadWrite

Result: FAIL

In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/DigitalPin.h:44:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/DigitalIO.h:31,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/examples/DigitalPinReadWrite/DigitalPinReadWrite.ino:2:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/boards/GpioPinMap.h:62:2: error: #error Unknown board type.
 #error Unknown board type.
  ^~~~~

examples/DigitalPinShiftOut

Result: FAIL

In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/DigitalPin.h:44:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/DigitalIO.h:31,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/examples/DigitalPinShiftOut/DigitalPinShiftOut.ino:2:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/boards/GpioPinMap.h:62:2: error: #error Unknown board type.
 #error Unknown board type.
  ^~~~~

examples/GpioPinMap

Result: PASS

Sketch uses 3215 bytes (6%) of program storage space. Maximum is 49152 bytes.
Global variables use 177 bytes (2%) of dynamic memory, leaving 5967 bytes for local variables. Maximum is 6144 bytes.

examples/PinIOBegin

Result: FAIL

In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/DigitalPin.h:44:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/DigitalIO.h:31,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/examples/PinIOBegin/PinIOBegin.ino:4:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/boards/GpioPinMap.h:62:2: error: #error Unknown board type.
 #error Unknown board type.
  ^~~~~

examples/PinIOConfigToggle

Result: FAIL

In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/DigitalPin.h:44:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/DigitalIO.h:31,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/examples/PinIOConfigToggle/PinIOConfigToggle.ino:3:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/boards/GpioPinMap.h:62:2: error: #error Unknown board type.
 #error Unknown board type.
  ^~~~~

examples/PinIOReadWrite

Result: FAIL

In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/DigitalPin.h:44:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/DigitalIO.h:31,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/examples/PinIOReadWrite/PinIOReadWrite.ino:3:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/boards/GpioPinMap.h:62:2: error: #error Unknown board type.
 #error Unknown board type.
  ^~~~~

examples/ScanI2cBus

Result: FAIL

In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/DigitalPin.h:44:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/DigitalIO.h:31,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/examples/ScanI2cBus/ScanI2cBus.ino:21:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/boards/GpioPinMap.h:62:2: error: #error Unknown board type.
 #error Unknown board type.
  ^~~~~

examples/SoftDS1307Utility

Result: FAIL

In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/DigitalPin.h:44:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/DigitalIO.h:31,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/examples/SoftDS1307Utility/SoftDS1307Utility.ino:4:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/boards/GpioPinMap.h:62:2: error: #error Unknown board type.
 #error Unknown board type.
  ^~~~~

examples/testArduino

Result: PASS

Sketch uses 1104 bytes (2%) of program storage space. Maximum is 49152 bytes.
Global variables use 22 bytes (0%) of dynamic memory, leaving 6122 bytes for local variables. Maximum is 6144 bytes.

examples/testDigitalPin

Result: FAIL

In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/DigitalPin.h:44:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/DigitalIO.h:31,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/examples/testDigitalPin/testDigitalPin.ino:2:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/boards/GpioPinMap.h:62:2: error: #error Unknown board type.
 #error Unknown board type.
  ^~~~~

examples/testFastDigital

Result: FAIL

In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/DigitalPin.h:44:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/DigitalIO.h:31,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/examples/testFastDigital/testFastDigital.ino:2:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/boards/GpioPinMap.h:62:2: error: #error Unknown board type.
 #error Unknown board type.
  ^~~~~

examples/testPinIO

Result: FAIL

In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/DigitalPin.h:44:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/DigitalIO.h:31,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/examples/testPinIO/testPinIO.ino:4:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/boards/GpioPinMap.h:62:2: error: #error Unknown board type.
 #error Unknown board type.
  ^~~~~

examples/testSoftSPI

Result: FAIL

In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/DigitalPin.h:44:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/DigitalIO.h:31,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/examples/testSoftSPI/testSoftSPI.ino:2:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/boards/GpioPinMap.h:62:2: error: #error Unknown board type.
 #error Unknown board type.
  ^~~~~

arduino:samd:mkrwifi1010 @ 1.8.12

Inclusion

Result: FAIL

In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/DigitalIO.h:31:0,
                 from /tmp/arduino-testlib884985520/test/test.ino:1:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/DigitalPin.h:278:25: error: variable or field 'fastPinMode' declared void
 inline void fastPinMode(pin, mode) {
                         ^~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/DigitalPin.h:278:25: error: 'pin' was not declared in this scope
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/DigitalPin.h:278:25: note: suggested alternative: 'min'
 inline void fastPinMode(pin, mode) {
                         ^~~
                         min
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/DigitalPin.h:278:30: error: 'mode' was not declared in this scope
 inline void fastPinMode(pin, mode) {
                              ^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/DigitalPin.h:278:30: note: suggested alternative: 'modf'
 inline void fastPinMode(pin, mode) {
                              ^~~~
                              modf
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/DigitalPin.h: In member function 'void DigitalPin<PinNumber>::config(uint8_t, bool)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/DigitalPin.h:290:4: error: there are no arguments to 'fastPinMode' that depend on a template parameter, so a declaration of 'fastPinMode' must be available [-fpermissive]
   {fastPinMode(pin, mode); fastDigitalWrite(pin, level);}
    ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/DigitalPin.h:328:5: note: in expansion of macro 'fastPinConfig'
     fastPinConfig(PinNumber, mode, level);
     ^~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/DigitalPin.h:290:4: note: (if you use '-fpermissive', G++ will accept your code, but allowing the use of an undeclared name is deprecated)
   {fastPinMode(pin, mode); fastDigitalWrite(pin, level);}
    ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/DigitalPin.h:328:5: note: in expansion of macro 'fastPinConfig'
     fastPinConfig(PinNumber, mode, level);
     ^~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/DigitalPin.h: In member function 'void DigitalPin<PinNumber>::mode(uint8_t)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/DigitalPin.h:352:5: error: there are no arguments to 'fastPinMode' that depend on a template parameter, so a declaration of 'fastPinMode' must be available [-fpermissive]
     fastPinMode(PinNumber, mode);
     ^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/SoftSPI.h: In member function 'void SoftSPI<MisoPin, MosiPin, SckPin, Mode>::begin()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/DigitalPin.h:290:4: error: there are no arguments to 'fastPinMode' that depend on a template parameter, so a declaration of 'fastPinMode' must be available [-fpermissive]
   {fastPinMode(pin, mode); fastDigitalWrite(pin, level);}
    ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/SoftSPI.h:55:5: note: in expansion of macro 'fastPinConfig'
     fastPinConfig(MisoPin, MISO_MODE, MISO_LEVEL);
     ^~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/DigitalPin.h:290:4: error: there are no arguments to 'fastPinMode' that depend on a template parameter, so a declaration of 'fastPinMode' must be available [-fpermissive]
   {fastPinMode(pin, mode); fastDigitalWrite(pin, level);}
    ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/SoftSPI.h:56:5: note: in expansion of macro 'fastPinConfig'
     fastPinConfig(MosiPin, MOSI_MODE, !MODE_CPHA(Mode));
     ^~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/DigitalPin.h:290:4: error: there are no arguments to 'fastPinMode' that depend on a template parameter, so a declaration of 'fastPinMode' must be available [-fpermissive]
   {fastPinMode(pin, mode); fastDigitalWrite(pin, level);}
    ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/SoftSPI.h:57:5: note: in expansion of macro 'fastPinConfig'
     fastPinConfig(SckPin, SCK_MODE, MODE_CPOL(Mode));
     ^~~~~~~~~~~~~

examples/DigitalPinBlink

Result: FAIL

In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/DigitalIO.h:31:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/examples/DigitalPinBlink/DigitalPinBlink.ino:2:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/DigitalPin.h:278:25: error: variable or field 'fastPinMode' declared void
 inline void fastPinMode(pin, mode) {
                         ^~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/DigitalPin.h:278:25: error: 'pin' was not declared in this scope
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/DigitalPin.h:278:25: note: suggested alternative: 'min'
 inline void fastPinMode(pin, mode) {
                         ^~~
                         min
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/DigitalPin.h:278:30: error: 'mode' was not declared in this scope
 inline void fastPinMode(pin, mode) {
                              ^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/DigitalPin.h:278:30: note: suggested alternative: 'modf'
 inline void fastPinMode(pin, mode) {
                              ^~~~
                              modf
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/DigitalPin.h: In member function 'void DigitalPin<PinNumber>::config(uint8_t, bool)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/DigitalPin.h:290:4: error: there are no arguments to 'fastPinMode' that depend on a template parameter, so a declaration of 'fastPinMode' must be available [-fpermissive]
   {fastPinMode(pin, mode); fastDigitalWrite(pin, level);}
    ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/DigitalPin.h:328:5: note: in expansion of macro 'fastPinConfig'
     fastPinConfig(PinNumber, mode, level);
     ^~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/DigitalPin.h:290:4: note: (if you use '-fpermissive', G++ will accept your code, but allowing the use of an undeclared name is deprecated)
   {fastPinMode(pin, mode); fastDigitalWrite(pin, level);}
    ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/DigitalPin.h:328:5: note: in expansion of macro 'fastPinConfig'
     fastPinConfig(PinNumber, mode, level);
     ^~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/DigitalPin.h: In member function 'void DigitalPin<PinNumber>::mode(uint8_t)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/DigitalPin.h:352:5: error: there are no arguments to 'fastPinMode' that depend on a template parameter, so a declaration of 'fastPinMode' must be available [-fpermissive]
     fastPinMode(PinNumber, mode);
     ^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/SoftSPI.h: In member function 'void SoftSPI<MisoPin, MosiPin, SckPin, Mode>::begin()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/DigitalPin.h:290:4: error: there are no arguments to 'fastPinMode' that depend on a template parameter, so a declaration of 'fastPinMode' must be available [-fpermissive]
   {fastPinMode(pin, mode); fastDigitalWrite(pin, level);}
    ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/SoftSPI.h:55:5: note: in expansion of macro 'fastPinConfig'
     fastPinConfig(MisoPin, MISO_MODE, MISO_LEVEL);
     ^~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/DigitalPin.h:290:4: error: there are no arguments to 'fastPinMode' that depend on a template parameter, so a declaration of 'fastPinMode' must be available [-fpermissive]
   {fastPinMode(pin, mode); fastDigitalWrite(pin, level);}
    ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/SoftSPI.h:56:5: note: in expansion of macro 'fastPinConfig'
     fastPinConfig(MosiPin, MOSI_MODE, !MODE_CPHA(Mode));
     ^~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/DigitalPin.h:290:4: error: there are no arguments to 'fastPinMode' that depend on a template parameter, so a declaration of 'fastPinMode' must be available [-fpermissive]
   {fastPinMode(pin, mode); fastDigitalWrite(pin, level);}
    ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/SoftSPI.h:57:5: note: in expansion of macro 'fastPinConfig'
     fastPinConfig(SckPin, SCK_MODE, MODE_CPOL(Mode));
     ^~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/DigitalPin.h: In instantiation of 'void DigitalPin<PinNumber>::mode(uint8_t) [with unsigned char PinNumber = 13; uint8_t = unsigned char]':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/examples/DigitalPinBlink/DigitalPinBlink.ino:7:19:   required from here
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/DigitalPin.h:352:16: error: 'fastPinMode' was not declared in this scope
     fastPinMode(PinNumber, mode);
     ~~~~~~~~~~~^~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/DigitalPin.h:352:16: note: suggested alternative: 'PinMode'
     fastPinMode(PinNumber, mode);
     ~~~~~~~~~~~^~~~~~~~~~~~~~~~~
     PinMode

examples/DigitalPinConfigToggle

Result: FAIL

In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/DigitalIO.h:31:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/examples/DigitalPinConfigToggle/DigitalPinConfigToggle.ino:2:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/DigitalPin.h:278:25: error: variable or field 'fastPinMode' declared void
 inline void fastPinMode(pin, mode) {
                         ^~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/DigitalPin.h:278:25: error: 'pin' was not declared in this scope
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/DigitalPin.h:278:25: note: suggested alternative: 'min'
 inline void fastPinMode(pin, mode) {
                         ^~~
                         min
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/DigitalPin.h:278:30: error: 'mode' was not declared in this scope
 inline void fastPinMode(pin, mode) {
                              ^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/DigitalPin.h:278:30: note: suggested alternative: 'modf'
 inline void fastPinMode(pin, mode) {
                              ^~~~
                              modf
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/DigitalPin.h: In member function 'void DigitalPin<PinNumber>::config(uint8_t, bool)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/DigitalPin.h:290:4: error: there are no arguments to 'fastPinMode' that depend on a template parameter, so a declaration of 'fastPinMode' must be available [-fpermissive]
   {fastPinMode(pin, mode); fastDigitalWrite(pin, level);}
    ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/DigitalPin.h:328:5: note: in expansion of macro 'fastPinConfig'
     fastPinConfig(PinNumber, mode, level);
     ^~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/DigitalPin.h:290:4: note: (if you use '-fpermissive', G++ will accept your code, but allowing the use of an undeclared name is deprecated)
   {fastPinMode(pin, mode); fastDigitalWrite(pin, level);}
    ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/DigitalPin.h:328:5: note: in expansion of macro 'fastPinConfig'
     fastPinConfig(PinNumber, mode, level);
     ^~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/DigitalPin.h: In member function 'void DigitalPin<PinNumber>::mode(uint8_t)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/DigitalPin.h:352:5: error: there are no arguments to 'fastPinMode' that depend on a template parameter, so a declaration of 'fastPinMode' must be available [-fpermissive]
     fastPinMode(PinNumber, mode);
     ^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/SoftSPI.h: In member function 'void SoftSPI<MisoPin, MosiPin, SckPin, Mode>::begin()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/DigitalPin.h:290:4: error: there are no arguments to 'fastPinMode' that depend on a template parameter, so a declaration of 'fastPinMode' must be available [-fpermissive]
   {fastPinMode(pin, mode); fastDigitalWrite(pin, level);}
    ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/SoftSPI.h:55:5: note: in expansion of macro 'fastPinConfig'
     fastPinConfig(MisoPin, MISO_MODE, MISO_LEVEL);
     ^~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/DigitalPin.h:290:4: error: there are no arguments to 'fastPinMode' that depend on a template parameter, so a declaration of 'fastPinMode' must be available [-fpermissive]
   {fastPinMode(pin, mode); fastDigitalWrite(pin, level);}
    ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/SoftSPI.h:56:5: note: in expansion of macro 'fastPinConfig'
     fastPinConfig(MosiPin, MOSI_MODE, !MODE_CPHA(Mode));
     ^~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/DigitalPin.h:290:4: error: there are no arguments to 'fastPinMode' that depend on a template parameter, so a declaration of 'fastPinMode' must be available [-fpermissive]
   {fastPinMode(pin, mode); fastDigitalWrite(pin, level);}
    ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/SoftSPI.h:57:5: note: in expansion of macro 'fastPinConfig'
     fastPinConfig(SckPin, SCK_MODE, MODE_CPOL(Mode));
     ^~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/DigitalPin.h: In instantiation of 'void DigitalPin<PinNumber>::config(uint8_t, bool) [with unsigned char PinNumber = 13; uint8_t = unsigned char]':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/examples/DigitalPinConfigToggle/DigitalPinConfigToggle.ino:9:27:   required from here
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/DigitalPin.h:290:15: error: 'fastPinMode' was not declared in this scope
   {fastPinMode(pin, mode); fastDigitalWrite(pin, level);}
    ~~~~~~~~~~~^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/DigitalPin.h:328:5: note: in expansion of macro 'fastPinConfig'
     fastPinConfig(PinNumber, mode, level);
     ^~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/DigitalPin.h:290:15: note: suggested alternative: 'PinMode'
   {fastPinMode(pin, mode); fastDigitalWrite(pin, level);}
    ~~~~~~~~~~~^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/DigitalPin.h:328:5: note: in expansion of macro 'fastPinConfig'
     fastPinConfig(PinNumber, mode, level);
     ^~~~~~~~~~~~~

examples/DigitalPinReadWrite

Result: FAIL

In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/DigitalIO.h:31:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/examples/DigitalPinReadWrite/DigitalPinReadWrite.ino:2:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/DigitalPin.h:278:25: error: variable or field 'fastPinMode' declared void
 inline void fastPinMode(pin, mode) {
                         ^~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/DigitalPin.h:278:25: error: 'pin' was not declared in this scope
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/DigitalPin.h:278:25: note: suggested alternative: 'min'
 inline void fastPinMode(pin, mode) {
                         ^~~
                         min
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/DigitalPin.h:278:30: error: 'mode' was not declared in this scope
 inline void fastPinMode(pin, mode) {
                              ^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/DigitalPin.h:278:30: note: suggested alternative: 'modf'
 inline void fastPinMode(pin, mode) {
                              ^~~~
                              modf
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/DigitalPin.h: In member function 'void DigitalPin<PinNumber>::config(uint8_t, bool)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/DigitalPin.h:290:4: error: there are no arguments to 'fastPinMode' that depend on a template parameter, so a declaration of 'fastPinMode' must be available [-fpermissive]
   {fastPinMode(pin, mode); fastDigitalWrite(pin, level);}
    ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/DigitalPin.h:328:5: note: in expansion of macro 'fastPinConfig'
     fastPinConfig(PinNumber, mode, level);
     ^~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/DigitalPin.h:290:4: note: (if you use '-fpermissive', G++ will accept your code, but allowing the use of an undeclared name is deprecated)
   {fastPinMode(pin, mode); fastDigitalWrite(pin, level);}
    ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/DigitalPin.h:328:5: note: in expansion of macro 'fastPinConfig'
     fastPinConfig(PinNumber, mode, level);
     ^~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/DigitalPin.h: In member function 'void DigitalPin<PinNumber>::mode(uint8_t)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/DigitalPin.h:352:5: error: there are no arguments to 'fastPinMode' that depend on a template parameter, so a declaration of 'fastPinMode' must be available [-fpermissive]
     fastPinMode(PinNumber, mode);
     ^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/SoftSPI.h: In member function 'void SoftSPI<MisoPin, MosiPin, SckPin, Mode>::begin()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/DigitalPin.h:290:4: error: there are no arguments to 'fastPinMode' that depend on a template parameter, so a declaration of 'fastPinMode' must be available [-fpermissive]
   {fastPinMode(pin, mode); fastDigitalWrite(pin, level);}
    ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/SoftSPI.h:55:5: note: in expansion of macro 'fastPinConfig'
     fastPinConfig(MisoPin, MISO_MODE, MISO_LEVEL);
     ^~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/DigitalPin.h:290:4: error: there are no arguments to 'fastPinMode' that depend on a template parameter, so a declaration of 'fastPinMode' must be available [-fpermissive]
   {fastPinMode(pin, mode); fastDigitalWrite(pin, level);}
    ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/SoftSPI.h:56:5: note: in expansion of macro 'fastPinConfig'
     fastPinConfig(MosiPin, MOSI_MODE, !MODE_CPHA(Mode));
     ^~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/DigitalPin.h:290:4: error: there are no arguments to 'fastPinMode' that depend on a template parameter, so a declaration of 'fastPinMode' must be available [-fpermissive]
   {fastPinMode(pin, mode); fastDigitalWrite(pin, level);}
    ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/SoftSPI.h:57:5: note: in expansion of macro 'fastPinConfig'
     fastPinConfig(SckPin, SCK_MODE, MODE_CPOL(Mode));
     ^~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/DigitalPin.h: In instantiation of 'void DigitalPin<PinNumber>::mode(uint8_t) [with unsigned char PinNumber = 12; uint8_t = unsigned char]':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/examples/DigitalPinReadWrite/DigitalPinReadWrite.ino:8:19:   required from here
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/DigitalPin.h:352:16: error: 'fastPinMode' was not declared in this scope
     fastPinMode(PinNumber, mode);
     ~~~~~~~~~~~^~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/DigitalPin.h:352:16: note: suggested alternative: 'PinMode'
     fastPinMode(PinNumber, mode);
     ~~~~~~~~~~~^~~~~~~~~~~~~~~~~
     PinMode
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/DigitalPin.h: In instantiation of 'void DigitalPin<PinNumber>::mode(uint8_t) [with unsigned char PinNumber = 13; uint8_t = unsigned char]':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/examples/DigitalPinReadWrite/DigitalPinReadWrite.ino:9:20:   required from here
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/DigitalPin.h:352:16: error: 'fastPinMode' was not declared in this scope
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/DigitalPin.h:352:16: note: suggested alternative: 'PinMode'
     fastPinMode(PinNumber, mode);
     ~~~~~~~~~~~^~~~~~~~~~~~~~~~~
     PinMode

examples/DigitalPinShiftOut

Result: FAIL

In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/DigitalIO.h:31:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/examples/DigitalPinShiftOut/DigitalPinShiftOut.ino:2:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/DigitalPin.h:278:25: error: variable or field 'fastPinMode' declared void
 inline void fastPinMode(pin, mode) {
                         ^~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/DigitalPin.h:278:25: error: 'pin' was not declared in this scope
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/DigitalPin.h:278:25: note: suggested alternative: 'min'
 inline void fastPinMode(pin, mode) {
                         ^~~
                         min
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/DigitalPin.h:278:30: error: 'mode' was not declared in this scope
 inline void fastPinMode(pin, mode) {
                              ^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/DigitalPin.h:278:30: note: suggested alternative: 'modf'
 inline void fastPinMode(pin, mode) {
                              ^~~~
                              modf
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/DigitalPin.h: In member function 'void DigitalPin<PinNumber>::config(uint8_t, bool)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/DigitalPin.h:290:4: error: there are no arguments to 'fastPinMode' that depend on a template parameter, so a declaration of 'fastPinMode' must be available [-fpermissive]
   {fastPinMode(pin, mode); fastDigitalWrite(pin, level);}
    ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/DigitalPin.h:328:5: note: in expansion of macro 'fastPinConfig'
     fastPinConfig(PinNumber, mode, level);
     ^~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/DigitalPin.h:290:4: note: (if you use '-fpermissive', G++ will accept your code, but allowing the use of an undeclared name is deprecated)
   {fastPinMode(pin, mode); fastDigitalWrite(pin, level);}
    ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/DigitalPin.h:328:5: note: in expansion of macro 'fastPinConfig'
     fastPinConfig(PinNumber, mode, level);
     ^~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/DigitalPin.h: In member function 'void DigitalPin<PinNumber>::mode(uint8_t)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/DigitalPin.h:352:5: error: there are no arguments to 'fastPinMode' that depend on a template parameter, so a declaration of 'fastPinMode' must be available [-fpermissive]
     fastPinMode(PinNumber, mode);
     ^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/SoftSPI.h: In member function 'void SoftSPI<MisoPin, MosiPin, SckPin, Mode>::begin()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/DigitalPin.h:290:4: error: there are no arguments to 'fastPinMode' that depend on a template parameter, so a declaration of 'fastPinMode' must be available [-fpermissive]
   {fastPinMode(pin, mode); fastDigitalWrite(pin, level);}
    ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/SoftSPI.h:55:5: note: in expansion of macro 'fastPinConfig'
     fastPinConfig(MisoPin, MISO_MODE, MISO_LEVEL);
     ^~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/DigitalPin.h:290:4: error: there are no arguments to 'fastPinMode' that depend on a template parameter, so a declaration of 'fastPinMode' must be available [-fpermissive]
   {fastPinMode(pin, mode); fastDigitalWrite(pin, level);}
    ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/SoftSPI.h:56:5: note: in expansion of macro 'fastPinConfig'
     fastPinConfig(MosiPin, MOSI_MODE, !MODE_CPHA(Mode));
     ^~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/DigitalPin.h:290:4: error: there are no arguments to 'fastPinMode' that depend on a template parameter, so a declaration of 'fastPinMode' must be available [-fpermissive]
   {fastPinMode(pin, mode); fastDigitalWrite(pin, level);}
    ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/SoftSPI.h:57:5: note: in expansion of macro 'fastPinConfig'
     fastPinConfig(SckPin, SCK_MODE, MODE_CPOL(Mode));
     ^~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/DigitalPin.h: In instantiation of 'void DigitalPin<PinNumber>::config(uint8_t, bool) [with unsigned char PinNumber = 12; uint8_t = unsigned char]':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/examples/DigitalPinShiftOut/DigitalPinShiftOut.ino:30:30:   required from here
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/DigitalPin.h:290:15: error: 'fastPinMode' was not declared in this scope
   {fastPinMode(pin, mode); fastDigitalWrite(pin, level);}
    ~~~~~~~~~~~^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/DigitalPin.h:328:5: note: in expansion of macro 'fastPinConfig'
     fastPinConfig(PinNumber, mode, level);
     ^~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/DigitalPin.h:290:15: note: suggested alternative: 'PinMode'
   {fastPinMode(pin, mode); fastDigitalWrite(pin, level);}
    ~~~~~~~~~~~^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/DigitalPin.h:328:5: note: in expansion of macro 'fastPinConfig'
     fastPinConfig(PinNumber, mode, level);
     ^~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/DigitalPin.h: In instantiation of 'void DigitalPin<PinNumber>::config(uint8_t, bool) [with unsigned char PinNumber = 13; uint8_t = unsigned char]':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/examples/DigitalPinShiftOut/DigitalPinShiftOut.ino:33:30:   required from here
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/DigitalPin.h:290:15: error: 'fastPinMode' was not declared in this scope
   {fastPinMode(pin, mode); fastDigitalWrite(pin, level);}
    ~~~~~~~~~~~^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/DigitalPin.h:328:5: note: in expansion of macro 'fastPinConfig'
     fastPinConfig(PinNumber, mode, level);
     ^~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/DigitalPin.h:290:15: note: suggested alternative: 'PinMode'
   {fastPinMode(pin, mode); fastDigitalWrite(pin, level);}
    ~~~~~~~~~~~^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/DigitalPin.h:328:5: note: in expansion of macro 'fastPinConfig'
     fastPinConfig(PinNumber, mode, level);
     ^~~~~~~~~~~~~

examples/GpioPinMap

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/examples/GpioPinMap/GpioPinMap.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/examples/GpioPinMap/GpioPinMap.ino:12:54: error: cast from 'PortGroup*' to 'char' loses precision [-fpermissive]
     Serial.print((char)('A' - 1 + digitalPinToPort(i)));
                                                      ^

examples/PinIOBegin

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/examples/PinIOBegin/PinIOBegin.ino:27:2: error: #error AVR only example
 #error AVR only example
  ^~~~~

examples/PinIOConfigToggle

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/examples/PinIOConfigToggle/PinIOConfigToggle.ino:19:2: error: #error AVR only example
 #error AVR only example
  ^~~~~

examples/PinIOReadWrite

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/examples/PinIOReadWrite/PinIOReadWrite.ino:19:2: error: #error AVR only example
 #error AVR only example
  ^~~~~

examples/ScanI2cBus

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/examples/ScanI2cBus/ScanI2cBus.ino:78:2: error: #error AVR only example
 #error AVR only example
  ^~~~~

examples/SoftDS1307Utility

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/examples/SoftDS1307Utility/SoftDS1307Utility.ino:325:2: error: #error AVR only example
 #error AVR only example
  ^~~~~

examples/testArduino

Result: PASS

Sketch uses 12208 bytes (4%) of program storage space. Maximum is 262144 bytes.
Global variables use 2996 bytes (9%) of dynamic memory, leaving 29772 bytes for local variables. Maximum is 32768 bytes.

examples/testDigitalPin

Result: FAIL

In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/DigitalIO.h:31:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/examples/testDigitalPin/testDigitalPin.ino:2:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/DigitalPin.h:278:25: error: variable or field 'fastPinMode' declared void
 inline void fastPinMode(pin, mode) {
                         ^~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/DigitalPin.h:278:25: error: 'pin' was not declared in this scope
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/DigitalPin.h:278:25: note: suggested alternative: 'min'
 inline void fastPinMode(pin, mode) {
                         ^~~
                         min
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/DigitalPin.h:278:30: error: 'mode' was not declared in this scope
 inline void fastPinMode(pin, mode) {
                              ^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/DigitalPin.h:278:30: note: suggested alternative: 'modf'
 inline void fastPinMode(pin, mode) {
                              ^~~~
                              modf
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/DigitalPin.h: In member function 'void DigitalPin<PinNumber>::config(uint8_t, bool)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/DigitalPin.h:290:4: error: there are no arguments to 'fastPinMode' that depend on a template parameter, so a declaration of 'fastPinMode' must be available [-fpermissive]
   {fastPinMode(pin, mode); fastDigitalWrite(pin, level);}
    ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/DigitalPin.h:328:5: note: in expansion of macro 'fastPinConfig'
     fastPinConfig(PinNumber, mode, level);
     ^~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/DigitalPin.h:290:4: note: (if you use '-fpermissive', G++ will accept your code, but allowing the use of an undeclared name is deprecated)
   {fastPinMode(pin, mode); fastDigitalWrite(pin, level);}
    ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/DigitalPin.h:328:5: note: in expansion of macro 'fastPinConfig'
     fastPinConfig(PinNumber, mode, level);
     ^~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/DigitalPin.h: In member function 'void DigitalPin<PinNumber>::mode(uint8_t)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/DigitalPin.h:352:5: error: there are no arguments to 'fastPinMode' that depend on a template parameter, so a declaration of 'fastPinMode' must be available [-fpermissive]
     fastPinMode(PinNumber, mode);
     ^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/SoftSPI.h: In member function 'void SoftSPI<MisoPin, MosiPin, SckPin, Mode>::begin()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/DigitalPin.h:290:4: error: there are no arguments to 'fastPinMode' that depend on a template parameter, so a declaration of 'fastPinMode' must be available [-fpermissive]
   {fastPinMode(pin, mode); fastDigitalWrite(pin, level);}
    ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/SoftSPI.h:55:5: note: in expansion of macro 'fastPinConfig'
     fastPinConfig(MisoPin, MISO_MODE, MISO_LEVEL);
     ^~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/DigitalPin.h:290:4: error: there are no arguments to 'fastPinMode' that depend on a template parameter, so a declaration of 'fastPinMode' must be available [-fpermissive]
   {fastPinMode(pin, mode); fastDigitalWrite(pin, level);}
    ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/SoftSPI.h:56:5: note: in expansion of macro 'fastPinConfig'
     fastPinConfig(MosiPin, MOSI_MODE, !MODE_CPHA(Mode));
     ^~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/DigitalPin.h:290:4: error: there are no arguments to 'fastPinMode' that depend on a template parameter, so a declaration of 'fastPinMode' must be available [-fpermissive]
   {fastPinMode(pin, mode); fastDigitalWrite(pin, level);}
    ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/SoftSPI.h:57:5: note: in expansion of macro 'fastPinConfig'
     fastPinConfig(SckPin, SCK_MODE, MODE_CPOL(Mode));
     ^~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/DigitalPin.h: In instantiation of 'void DigitalPin<PinNumber>::mode(uint8_t) [with unsigned char PinNumber = 13; uint8_t = unsigned char]':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/examples/testDigitalPin/testDigitalPin.ino:9:20:   required from here
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/DigitalPin.h:352:16: error: 'fastPinMode' was not declared in this scope
     fastPinMode(PinNumber, mode);
     ~~~~~~~~~~~^~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/DigitalPin.h:352:16: note: suggested alternative: 'PinMode'
     fastPinMode(PinNumber, mode);
     ~~~~~~~~~~~^~~~~~~~~~~~~~~~~
     PinMode

examples/testFastDigital

Result: FAIL

In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/DigitalIO.h:31:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/examples/testFastDigital/testFastDigital.ino:2:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/DigitalPin.h:278:25: error: variable or field 'fastPinMode' declared void
 inline void fastPinMode(pin, mode) {
                         ^~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/DigitalPin.h:278:25: error: 'pin' was not declared in this scope
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/DigitalPin.h:278:25: note: suggested alternative: 'min'
 inline void fastPinMode(pin, mode) {
                         ^~~
                         min
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/DigitalPin.h:278:30: error: 'mode' was not declared in this scope
 inline void fastPinMode(pin, mode) {
                              ^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/DigitalPin.h:278:30: note: suggested alternative: 'modf'
 inline void fastPinMode(pin, mode) {
                              ^~~~
                              modf
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/DigitalPin.h: In member function 'void DigitalPin<PinNumber>::config(uint8_t, bool)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/DigitalPin.h:290:4: error: there are no arguments to 'fastPinMode' that depend on a template parameter, so a declaration of 'fastPinMode' must be available [-fpermissive]
   {fastPinMode(pin, mode); fastDigitalWrite(pin, level);}
    ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/DigitalPin.h:328:5: note: in expansion of macro 'fastPinConfig'
     fastPinConfig(PinNumber, mode, level);
     ^~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/DigitalPin.h:290:4: note: (if you use '-fpermissive', G++ will accept your code, but allowing the use of an undeclared name is deprecated)
   {fastPinMode(pin, mode); fastDigitalWrite(pin, level);}
    ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/DigitalPin.h:328:5: note: in expansion of macro 'fastPinConfig'
     fastPinConfig(PinNumber, mode, level);
     ^~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/DigitalPin.h: In member function 'void DigitalPin<PinNumber>::mode(uint8_t)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/DigitalPin.h:352:5: error: there are no arguments to 'fastPinMode' that depend on a template parameter, so a declaration of 'fastPinMode' must be available [-fpermissive]
     fastPinMode(PinNumber, mode);
     ^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/SoftSPI.h: In member function 'void SoftSPI<MisoPin, MosiPin, SckPin, Mode>::begin()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/DigitalPin.h:290:4: error: there are no arguments to 'fastPinMode' that depend on a template parameter, so a declaration of 'fastPinMode' must be available [-fpermissive]
   {fastPinMode(pin, mode); fastDigitalWrite(pin, level);}
    ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/SoftSPI.h:55:5: note: in expansion of macro 'fastPinConfig'
     fastPinConfig(MisoPin, MISO_MODE, MISO_LEVEL);
     ^~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/DigitalPin.h:290:4: error: there are no arguments to 'fastPinMode' that depend on a template parameter, so a declaration of 'fastPinMode' must be available [-fpermissive]
   {fastPinMode(pin, mode); fastDigitalWrite(pin, level);}
    ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/SoftSPI.h:56:5: note: in expansion of macro 'fastPinConfig'
     fastPinConfig(MosiPin, MOSI_MODE, !MODE_CPHA(Mode));
     ^~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/DigitalPin.h:290:4: error: there are no arguments to 'fastPinMode' that depend on a template parameter, so a declaration of 'fastPinMode' must be available [-fpermissive]
   {fastPinMode(pin, mode); fastDigitalWrite(pin, level);}
    ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/SoftSPI.h:57:5: note: in expansion of macro 'fastPinConfig'
     fastPinConfig(SckPin, SCK_MODE, MODE_CPOL(Mode));
     ^~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/examples/testFastDigital/testFastDigital.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/examples/testFastDigital/testFastDigital.ino:5:3: error: 'fastPinMode' was not declared in this scope
   fastPinMode(PIN, OUTPUT);
   ^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/examples/testFastDigital/testFastDigital.ino:5:3: note: suggested alternative: 'PinMode'
   fastPinMode(PIN, OUTPUT);
   ^~~~~~~~~~~
   PinMode

examples/testPinIO

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/examples/testPinIO/testPinIO.ino:23:2: error: #error AVR only example
 #error AVR only example
  ^~~~~

examples/testSoftSPI

Result: FAIL

In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/DigitalIO.h:31:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/examples/testSoftSPI/testSoftSPI.ino:2:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/DigitalPin.h:278:25: error: variable or field 'fastPinMode' declared void
 inline void fastPinMode(pin, mode) {
                         ^~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/DigitalPin.h:278:25: error: 'pin' was not declared in this scope
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/DigitalPin.h:278:25: note: suggested alternative: 'min'
 inline void fastPinMode(pin, mode) {
                         ^~~
                         min
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/DigitalPin.h:278:30: error: 'mode' was not declared in this scope
 inline void fastPinMode(pin, mode) {
                              ^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/DigitalPin.h:278:30: note: suggested alternative: 'modf'
 inline void fastPinMode(pin, mode) {
                              ^~~~
                              modf
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/DigitalPin.h: In member function 'void DigitalPin<PinNumber>::config(uint8_t, bool)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/DigitalPin.h:290:4: error: there are no arguments to 'fastPinMode' that depend on a template parameter, so a declaration of 'fastPinMode' must be available [-fpermissive]
   {fastPinMode(pin, mode); fastDigitalWrite(pin, level);}
    ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/DigitalPin.h:328:5: note: in expansion of macro 'fastPinConfig'
     fastPinConfig(PinNumber, mode, level);
     ^~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/DigitalPin.h:290:4: note: (if you use '-fpermissive', G++ will accept your code, but allowing the use of an undeclared name is deprecated)
   {fastPinMode(pin, mode); fastDigitalWrite(pin, level);}
    ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/DigitalPin.h:328:5: note: in expansion of macro 'fastPinConfig'
     fastPinConfig(PinNumber, mode, level);
     ^~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/DigitalPin.h: In member function 'void DigitalPin<PinNumber>::mode(uint8_t)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/DigitalPin.h:352:5: error: there are no arguments to 'fastPinMode' that depend on a template parameter, so a declaration of 'fastPinMode' must be available [-fpermissive]
     fastPinMode(PinNumber, mode);
     ^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/SoftSPI.h: In member function 'void SoftSPI<MisoPin, MosiPin, SckPin, Mode>::begin()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/DigitalPin.h:290:4: error: there are no arguments to 'fastPinMode' that depend on a template parameter, so a declaration of 'fastPinMode' must be available [-fpermissive]
   {fastPinMode(pin, mode); fastDigitalWrite(pin, level);}
    ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/SoftSPI.h:55:5: note: in expansion of macro 'fastPinConfig'
     fastPinConfig(MisoPin, MISO_MODE, MISO_LEVEL);
     ^~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/DigitalPin.h:290:4: error: there are no arguments to 'fastPinMode' that depend on a template parameter, so a declaration of 'fastPinMode' must be available [-fpermissive]
   {fastPinMode(pin, mode); fastDigitalWrite(pin, level);}
    ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/SoftSPI.h:56:5: note: in expansion of macro 'fastPinConfig'
     fastPinConfig(MosiPin, MOSI_MODE, !MODE_CPHA(Mode));
     ^~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/DigitalPin.h:290:4: error: there are no arguments to 'fastPinMode' that depend on a template parameter, so a declaration of 'fastPinMode' must be available [-fpermissive]
   {fastPinMode(pin, mode); fastDigitalWrite(pin, level);}
    ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/SoftSPI.h:57:5: note: in expansion of macro 'fastPinConfig'
     fastPinConfig(SckPin, SCK_MODE, MODE_CPOL(Mode));
     ^~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/SoftSPI.h: In instantiation of 'void SoftSPI<MisoPin, MosiPin, SckPin, Mode>::begin() [with unsigned char MisoPin = 7; unsigned char MosiPin = 8; unsigned char SckPin = 9; unsigned char Mode = 0]':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/examples/testSoftSPI/testSoftSPI.ino:14:13:   required from here
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/DigitalPin.h:290:15: error: 'fastPinMode' was not declared in this scope
   {fastPinMode(pin, mode); fastDigitalWrite(pin, level);}
    ~~~~~~~~~~~^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/SoftSPI.h:55:5: note: in expansion of macro 'fastPinConfig'
     fastPinConfig(MisoPin, MISO_MODE, MISO_LEVEL);
     ^~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/DigitalPin.h:290:15: note: suggested alternative: 'PinMode'
   {fastPinMode(pin, mode); fastDigitalWrite(pin, level);}
    ~~~~~~~~~~~^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/SoftSPI.h:55:5: note: in expansion of macro 'fastPinConfig'
     fastPinConfig(MisoPin, MISO_MODE, MISO_LEVEL);
     ^~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/DigitalPin.h:290:15: error: 'fastPinMode' was not declared in this scope
   {fastPinMode(pin, mode); fastDigitalWrite(pin, level);}
    ~~~~~~~~~~~^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/SoftSPI.h:56:5: note: in expansion of macro 'fastPinConfig'
     fastPinConfig(MosiPin, MOSI_MODE, !MODE_CPHA(Mode));
     ^~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/DigitalPin.h:290:15: note: suggested alternative: 'PinMode'
   {fastPinMode(pin, mode); fastDigitalWrite(pin, level);}
    ~~~~~~~~~~~^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/SoftSPI.h:56:5: note: in expansion of macro 'fastPinConfig'
     fastPinConfig(MosiPin, MOSI_MODE, !MODE_CPHA(Mode));
     ^~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/DigitalPin.h:290:15: error: 'fastPinMode' was not declared in this scope
   {fastPinMode(pin, mode); fastDigitalWrite(pin, level);}
    ~~~~~~~~~~~^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/SoftSPI.h:57:5: note: in expansion of macro 'fastPinConfig'
     fastPinConfig(SckPin, SCK_MODE, MODE_CPOL(Mode));
     ^~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/DigitalPin.h:290:15: note: suggested alternative: 'PinMode'
   {fastPinMode(pin, mode); fastDigitalWrite(pin, level);}
    ~~~~~~~~~~~^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/SoftSPI.h:57:5: note: in expansion of macro 'fastPinConfig'
     fastPinConfig(SckPin, SCK_MODE, MODE_CPOL(Mode));
     ^~~~~~~~~~~~~

esp32:esp32:d1_mini32 @ 1.0.6

Inclusion

Result: FAIL

In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/DigitalIO.h:31:0,
                 from /tmp/arduino-testlib3904942956/test/test.ino:1:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/DigitalPin.h:278:25: error: variable or field 'fastPinMode' declared void
 inline void fastPinMode(pin, mode) {
                         ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/DigitalPin.h:278:25: error: 'pin' was not declared in this scope
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/DigitalPin.h:278:30: error: 'mode' was not declared in this scope
 inline void fastPinMode(pin, mode) {
                              ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/DigitalPin.h: In member function 'void DigitalPin<PinNumber>::config(uint8_t, bool)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/DigitalPin.h:290:25: error: there are no arguments to 'fastPinMode' that depend on a template parameter, so a declaration of 'fastPinMode' must be available [-fpermissive]
   {fastPinMode(pin, mode); fastDigitalWrite(pin, level);}
                         ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/DigitalPin.h:328:5: note: in expansion of macro 'fastPinConfig'
     fastPinConfig(PinNumber, mode, level);
     ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/DigitalPin.h:290:25: note: (if you use '-fpermissive', G++ will accept your code, but allowing the use of an undeclared name is deprecated)
   {fastPinMode(pin, mode); fastDigitalWrite(pin, level);}
                         ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/DigitalPin.h:328:5: note: in expansion of macro 'fastPinConfig'
     fastPinConfig(PinNumber, mode, level);
     ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/DigitalPin.h: In member function 'void DigitalPin<PinNumber>::mode(uint8_t)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/DigitalPin.h:352:32: error: there are no arguments to 'fastPinMode' that depend on a template parameter, so a declaration of 'fastPinMode' must be available [-fpermissive]
     fastPinMode(PinNumber, mode);
                                ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/SoftSPI.h: In member function 'void SoftSPI<MisoPin, MosiPin, SckPin, Mode>::begin()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/DigitalPin.h:290:25: error: there are no arguments to 'fastPinMode' that depend on a template parameter, so a declaration of 'fastPinMode' must be available [-fpermissive]
   {fastPinMode(pin, mode); fastDigitalWrite(pin, level);}
                         ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/SoftSPI.h:55:5: note: in expansion of macro 'fastPinConfig'
     fastPinConfig(MisoPin, MISO_MODE, MISO_LEVEL);
     ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/DigitalPin.h:290:25: error: there are no arguments to 'fastPinMode' that depend on a template parameter, so a declaration of 'fastPinMode' must be available [-fpermissive]
   {fastPinMode(pin, mode); fastDigitalWrite(pin, level);}
                         ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/SoftSPI.h:56:5: note: in expansion of macro 'fastPinConfig'
     fastPinConfig(MosiPin, MOSI_MODE, !MODE_CPHA(Mode));
     ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/DigitalPin.h:290:25: error: there are no arguments to 'fastPinMode' that depend on a template parameter, so a declaration of 'fastPinMode' must be available [-fpermissive]
   {fastPinMode(pin, mode); fastDigitalWrite(pin, level);}
                         ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/SoftSPI.h:57:5: note: in expansion of macro 'fastPinConfig'
     fastPinConfig(SckPin, SCK_MODE, MODE_CPOL(Mode));
     ^

examples/DigitalPinBlink

Result: FAIL

In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/DigitalIO.h:31:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/examples/DigitalPinBlink/DigitalPinBlink.ino:2:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/DigitalPin.h:278:25: error: variable or field 'fastPinMode' declared void
 inline void fastPinMode(pin, mode) {
                         ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/DigitalPin.h:278:25: error: 'pin' was not declared in this scope
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/DigitalPin.h:278:30: error: 'mode' was not declared in this scope
 inline void fastPinMode(pin, mode) {
                              ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/DigitalPin.h: In member function 'void DigitalPin<PinNumber>::config(uint8_t, bool)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/DigitalPin.h:290:25: error: there are no arguments to 'fastPinMode' that depend on a template parameter, so a declaration of 'fastPinMode' must be available [-fpermissive]
   {fastPinMode(pin, mode); fastDigitalWrite(pin, level);}
                         ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/DigitalPin.h:328:5: note: in expansion of macro 'fastPinConfig'
     fastPinConfig(PinNumber, mode, level);
     ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/DigitalPin.h:290:25: note: (if you use '-fpermissive', G++ will accept your code, but allowing the use of an undeclared name is deprecated)
   {fastPinMode(pin, mode); fastDigitalWrite(pin, level);}
                         ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/DigitalPin.h:328:5: note: in expansion of macro 'fastPinConfig'
     fastPinConfig(PinNumber, mode, level);
     ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/DigitalPin.h: In member function 'void DigitalPin<PinNumber>::mode(uint8_t)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/DigitalPin.h:352:32: error: there are no arguments to 'fastPinMode' that depend on a template parameter, so a declaration of 'fastPinMode' must be available [-fpermissive]
     fastPinMode(PinNumber, mode);
                                ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/SoftSPI.h: In member function 'void SoftSPI<MisoPin, MosiPin, SckPin, Mode>::begin()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/DigitalPin.h:290:25: error: there are no arguments to 'fastPinMode' that depend on a template parameter, so a declaration of 'fastPinMode' must be available [-fpermissive]
   {fastPinMode(pin, mode); fastDigitalWrite(pin, level);}
                         ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/SoftSPI.h:55:5: note: in expansion of macro 'fastPinConfig'
     fastPinConfig(MisoPin, MISO_MODE, MISO_LEVEL);
     ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/DigitalPin.h:290:25: error: there are no arguments to 'fastPinMode' that depend on a template parameter, so a declaration of 'fastPinMode' must be available [-fpermissive]
   {fastPinMode(pin, mode); fastDigitalWrite(pin, level);}
                         ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/SoftSPI.h:56:5: note: in expansion of macro 'fastPinConfig'
     fastPinConfig(MosiPin, MOSI_MODE, !MODE_CPHA(Mode));
     ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/DigitalPin.h:290:25: error: there are no arguments to 'fastPinMode' that depend on a template parameter, so a declaration of 'fastPinMode' must be available [-fpermissive]
   {fastPinMode(pin, mode); fastDigitalWrite(pin, level);}
                         ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/SoftSPI.h:57:5: note: in expansion of macro 'fastPinConfig'
     fastPinConfig(SckPin, SCK_MODE, MODE_CPOL(Mode));
     ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/DigitalPin.h: In instantiation of 'void DigitalPin<PinNumber>::mode(uint8_t) [with unsigned char PinNumber = 13u; uint8_t = unsigned char]':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/examples/DigitalPinBlink/DigitalPinBlink.ino:7:19:   required from here
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/DigitalPin.h:352:16: error: 'fastPinMode' was not declared in this scope
     fastPinMode(PinNumber, mode);
                ^

examples/DigitalPinConfigToggle

Result: FAIL

In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/DigitalIO.h:31:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/examples/DigitalPinConfigToggle/DigitalPinConfigToggle.ino:2:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/DigitalPin.h:278:25: error: variable or field 'fastPinMode' declared void
 inline void fastPinMode(pin, mode) {
                         ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/DigitalPin.h:278:25: error: 'pin' was not declared in this scope
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/DigitalPin.h:278:30: error: 'mode' was not declared in this scope
 inline void fastPinMode(pin, mode) {
                              ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/DigitalPin.h: In member function 'void DigitalPin<PinNumber>::config(uint8_t, bool)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/DigitalPin.h:290:25: error: there are no arguments to 'fastPinMode' that depend on a template parameter, so a declaration of 'fastPinMode' must be available [-fpermissive]
   {fastPinMode(pin, mode); fastDigitalWrite(pin, level);}
                         ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/DigitalPin.h:328:5: note: in expansion of macro 'fastPinConfig'
     fastPinConfig(PinNumber, mode, level);
     ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/DigitalPin.h:290:25: note: (if you use '-fpermissive', G++ will accept your code, but allowing the use of an undeclared name is deprecated)
   {fastPinMode(pin, mode); fastDigitalWrite(pin, level);}
                         ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/DigitalPin.h:328:5: note: in expansion of macro 'fastPinConfig'
     fastPinConfig(PinNumber, mode, level);
     ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/DigitalPin.h: In member function 'void DigitalPin<PinNumber>::mode(uint8_t)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/DigitalPin.h:352:32: error: there are no arguments to 'fastPinMode' that depend on a template parameter, so a declaration of 'fastPinMode' must be available [-fpermissive]
     fastPinMode(PinNumber, mode);
                                ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/SoftSPI.h: In member function 'void SoftSPI<MisoPin, MosiPin, SckPin, Mode>::begin()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/DigitalPin.h:290:25: error: there are no arguments to 'fastPinMode' that depend on a template parameter, so a declaration of 'fastPinMode' must be available [-fpermissive]
   {fastPinMode(pin, mode); fastDigitalWrite(pin, level);}
                         ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/SoftSPI.h:55:5: note: in expansion of macro 'fastPinConfig'
     fastPinConfig(MisoPin, MISO_MODE, MISO_LEVEL);
     ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/DigitalPin.h:290:25: error: there are no arguments to 'fastPinMode' that depend on a template parameter, so a declaration of 'fastPinMode' must be available [-fpermissive]
   {fastPinMode(pin, mode); fastDigitalWrite(pin, level);}
                         ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/SoftSPI.h:56:5: note: in expansion of macro 'fastPinConfig'
     fastPinConfig(MosiPin, MOSI_MODE, !MODE_CPHA(Mode));
     ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/DigitalPin.h:290:25: error: there are no arguments to 'fastPinMode' that depend on a template parameter, so a declaration of 'fastPinMode' must be available [-fpermissive]
   {fastPinMode(pin, mode); fastDigitalWrite(pin, level);}
                         ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/SoftSPI.h:57:5: note: in expansion of macro 'fastPinConfig'
     fastPinConfig(SckPin, SCK_MODE, MODE_CPOL(Mode));
     ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/DigitalPin.h: In instantiation of 'void DigitalPin<PinNumber>::config(uint8_t, bool) [with unsigned char PinNumber = 13u; uint8_t = unsigned char]':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/examples/DigitalPinConfigToggle/DigitalPinConfigToggle.ino:9:27:   required from here
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/DigitalPin.h:290:15: error: 'fastPinMode' was not declared in this scope
   {fastPinMode(pin, mode); fastDigitalWrite(pin, level);}
               ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/DigitalPin.h:328:5: note: in expansion of macro 'fastPinConfig'
     fastPinConfig(PinNumber, mode, level);
     ^

examples/DigitalPinReadWrite

Result: FAIL

In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/DigitalIO.h:31:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/examples/DigitalPinReadWrite/DigitalPinReadWrite.ino:2:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/DigitalPin.h:278:25: error: variable or field 'fastPinMode' declared void
 inline void fastPinMode(pin, mode) {
                         ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/DigitalPin.h:278:25: error: 'pin' was not declared in this scope
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/DigitalPin.h:278:30: error: 'mode' was not declared in this scope
 inline void fastPinMode(pin, mode) {
                              ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/DigitalPin.h: In member function 'void DigitalPin<PinNumber>::config(uint8_t, bool)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/DigitalPin.h:290:25: error: there are no arguments to 'fastPinMode' that depend on a template parameter, so a declaration of 'fastPinMode' must be available [-fpermissive]
   {fastPinMode(pin, mode); fastDigitalWrite(pin, level);}
                         ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/DigitalPin.h:328:5: note: in expansion of macro 'fastPinConfig'
     fastPinConfig(PinNumber, mode, level);
     ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/DigitalPin.h:290:25: note: (if you use '-fpermissive', G++ will accept your code, but allowing the use of an undeclared name is deprecated)
   {fastPinMode(pin, mode); fastDigitalWrite(pin, level);}
                         ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/DigitalPin.h:328:5: note: in expansion of macro 'fastPinConfig'
     fastPinConfig(PinNumber, mode, level);
     ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/DigitalPin.h: In member function 'void DigitalPin<PinNumber>::mode(uint8_t)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/DigitalPin.h:352:32: error: there are no arguments to 'fastPinMode' that depend on a template parameter, so a declaration of 'fastPinMode' must be available [-fpermissive]
     fastPinMode(PinNumber, mode);
                                ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/SoftSPI.h: In member function 'void SoftSPI<MisoPin, MosiPin, SckPin, Mode>::begin()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/DigitalPin.h:290:25: error: there are no arguments to 'fastPinMode' that depend on a template parameter, so a declaration of 'fastPinMode' must be available [-fpermissive]
   {fastPinMode(pin, mode); fastDigitalWrite(pin, level);}
                         ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/SoftSPI.h:55:5: note: in expansion of macro 'fastPinConfig'
     fastPinConfig(MisoPin, MISO_MODE, MISO_LEVEL);
     ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/DigitalPin.h:290:25: error: there are no arguments to 'fastPinMode' that depend on a template parameter, so a declaration of 'fastPinMode' must be available [-fpermissive]
   {fastPinMode(pin, mode); fastDigitalWrite(pin, level);}
                         ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/SoftSPI.h:56:5: note: in expansion of macro 'fastPinConfig'
     fastPinConfig(MosiPin, MOSI_MODE, !MODE_CPHA(Mode));
     ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/DigitalPin.h:290:25: error: there are no arguments to 'fastPinMode' that depend on a template parameter, so a declaration of 'fastPinMode' must be available [-fpermissive]
   {fastPinMode(pin, mode); fastDigitalWrite(pin, level);}
                         ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/SoftSPI.h:57:5: note: in expansion of macro 'fastPinConfig'
     fastPinConfig(SckPin, SCK_MODE, MODE_CPOL(Mode));
     ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/DigitalPin.h: In instantiation of 'void DigitalPin<PinNumber>::mode(uint8_t) [with unsigned char PinNumber = 12u; uint8_t = unsigned char]':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/examples/DigitalPinReadWrite/DigitalPinReadWrite.ino:8:19:   required from here
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/DigitalPin.h:352:16: error: 'fastPinMode' was not declared in this scope
     fastPinMode(PinNumber, mode);
                ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/DigitalPin.h: In instantiation of 'void DigitalPin<PinNumber>::mode(uint8_t) [with unsigned char PinNumber = 13u; uint8_t = unsigned char]':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/examples/DigitalPinReadWrite/DigitalPinReadWrite.ino:9:20:   required from here
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/DigitalPin.h:352:16: error: 'fastPinMode' was not declared in this scope

examples/DigitalPinShiftOut

Result: FAIL

In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/DigitalIO.h:31:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/examples/DigitalPinShiftOut/DigitalPinShiftOut.ino:2:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/DigitalPin.h:278:25: error: variable or field 'fastPinMode' declared void
 inline void fastPinMode(pin, mode) {
                         ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/DigitalPin.h:278:25: error: 'pin' was not declared in this scope
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/DigitalPin.h:278:30: error: 'mode' was not declared in this scope
 inline void fastPinMode(pin, mode) {
                              ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/DigitalPin.h: In member function 'void DigitalPin<PinNumber>::config(uint8_t, bool)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/DigitalPin.h:290:25: error: there are no arguments to 'fastPinMode' that depend on a template parameter, so a declaration of 'fastPinMode' must be available [-fpermissive]
   {fastPinMode(pin, mode); fastDigitalWrite(pin, level);}
                         ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/DigitalPin.h:328:5: note: in expansion of macro 'fastPinConfig'
     fastPinConfig(PinNumber, mode, level);
     ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/DigitalPin.h:290:25: note: (if you use '-fpermissive', G++ will accept your code, but allowing the use of an undeclared name is deprecated)
   {fastPinMode(pin, mode); fastDigitalWrite(pin, level);}
                         ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/DigitalPin.h:328:5: note: in expansion of macro 'fastPinConfig'
     fastPinConfig(PinNumber, mode, level);
     ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/DigitalPin.h: In member function 'void DigitalPin<PinNumber>::mode(uint8_t)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/DigitalPin.h:352:32: error: there are no arguments to 'fastPinMode' that depend on a template parameter, so a declaration of 'fastPinMode' must be available [-fpermissive]
     fastPinMode(PinNumber, mode);
                                ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/SoftSPI.h: In member function 'void SoftSPI<MisoPin, MosiPin, SckPin, Mode>::begin()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/DigitalPin.h:290:25: error: there are no arguments to 'fastPinMode' that depend on a template parameter, so a declaration of 'fastPinMode' must be available [-fpermissive]
   {fastPinMode(pin, mode); fastDigitalWrite(pin, level);}
                         ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/SoftSPI.h:55:5: note: in expansion of macro 'fastPinConfig'
     fastPinConfig(MisoPin, MISO_MODE, MISO_LEVEL);
     ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/DigitalPin.h:290:25: error: there are no arguments to 'fastPinMode' that depend on a template parameter, so a declaration of 'fastPinMode' must be available [-fpermissive]
   {fastPinMode(pin, mode); fastDigitalWrite(pin, level);}
                         ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/SoftSPI.h:56:5: note: in expansion of macro 'fastPinConfig'
     fastPinConfig(MosiPin, MOSI_MODE, !MODE_CPHA(Mode));
     ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/DigitalPin.h:290:25: error: there are no arguments to 'fastPinMode' that depend on a template parameter, so a declaration of 'fastPinMode' must be available [-fpermissive]
   {fastPinMode(pin, mode); fastDigitalWrite(pin, level);}
                         ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/SoftSPI.h:57:5: note: in expansion of macro 'fastPinConfig'
     fastPinConfig(SckPin, SCK_MODE, MODE_CPOL(Mode));
     ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/DigitalPin.h: In instantiation of 'void DigitalPin<PinNumber>::config(uint8_t, bool) [with unsigned char PinNumber = 12u; uint8_t = unsigned char]':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/examples/DigitalPinShiftOut/DigitalPinShiftOut.ino:30:30:   required from here
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/DigitalPin.h:290:15: error: 'fastPinMode' was not declared in this scope
   {fastPinMode(pin, mode); fastDigitalWrite(pin, level);}
               ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/DigitalPin.h:328:5: note: in expansion of macro 'fastPinConfig'
     fastPinConfig(PinNumber, mode, level);
     ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/DigitalPin.h: In instantiation of 'void DigitalPin<PinNumber>::config(uint8_t, bool) [with unsigned char PinNumber = 13u; uint8_t = unsigned char]':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/examples/DigitalPinShiftOut/DigitalPinShiftOut.ino:33:30:   required from here
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/DigitalPin.h:290:15: error: 'fastPinMode' was not declared in this scope
   {fastPinMode(pin, mode); fastDigitalWrite(pin, level);}
               ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/DigitalPin.h:328:5: note: in expansion of macro 'fastPinConfig'
     fastPinConfig(PinNumber, mode, level);
     ^

examples/GpioPinMap

Result: PASS

Sketch uses 204866 bytes (15%) of program storage space. Maximum is 1310720 bytes.
Global variables use 13416 bytes (4%) of dynamic memory, leaving 314264 bytes for local variables. Maximum is 327680 bytes.

examples/PinIOBegin

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/examples/PinIOBegin/PinIOBegin.ino:27:2: error: #error AVR only example
 #error AVR only example
  ^

examples/PinIOConfigToggle

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/examples/PinIOConfigToggle/PinIOConfigToggle.ino:19:2: error: #error AVR only example
 #error AVR only example
  ^

examples/PinIOReadWrite

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/examples/PinIOReadWrite/PinIOReadWrite.ino:19:2: error: #error AVR only example
 #error AVR only example
  ^

examples/ScanI2cBus

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/examples/ScanI2cBus/ScanI2cBus.ino:78:2: error: #error AVR only example
 #error AVR only example
  ^

examples/SoftDS1307Utility

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/examples/SoftDS1307Utility/SoftDS1307Utility.ino:325:2: error: #error AVR only example
 #error AVR only example
  ^

examples/testArduino

Result: PASS

Sketch uses 198842 bytes (15%) of program storage space. Maximum is 1310720 bytes.
Global variables use 13248 bytes (4%) of dynamic memory, leaving 314432 bytes for local variables. Maximum is 327680 bytes.

examples/testDigitalPin

Result: FAIL

In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/DigitalIO.h:31:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/examples/testDigitalPin/testDigitalPin.ino:2:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/DigitalPin.h:278:25: error: variable or field 'fastPinMode' declared void
 inline void fastPinMode(pin, mode) {
                         ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/DigitalPin.h:278:25: error: 'pin' was not declared in this scope
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/DigitalPin.h:278:30: error: 'mode' was not declared in this scope
 inline void fastPinMode(pin, mode) {
                              ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/DigitalPin.h: In member function 'void DigitalPin<PinNumber>::config(uint8_t, bool)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/DigitalPin.h:290:25: error: there are no arguments to 'fastPinMode' that depend on a template parameter, so a declaration of 'fastPinMode' must be available [-fpermissive]
   {fastPinMode(pin, mode); fastDigitalWrite(pin, level);}
                         ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/DigitalPin.h:328:5: note: in expansion of macro 'fastPinConfig'
     fastPinConfig(PinNumber, mode, level);
     ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/DigitalPin.h:290:25: note: (if you use '-fpermissive', G++ will accept your code, but allowing the use of an undeclared name is deprecated)
   {fastPinMode(pin, mode); fastDigitalWrite(pin, level);}
                         ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/DigitalPin.h:328:5: note: in expansion of macro 'fastPinConfig'
     fastPinConfig(PinNumber, mode, level);
     ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/DigitalPin.h: In member function 'void DigitalPin<PinNumber>::mode(uint8_t)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/DigitalPin.h:352:32: error: there are no arguments to 'fastPinMode' that depend on a template parameter, so a declaration of 'fastPinMode' must be available [-fpermissive]
     fastPinMode(PinNumber, mode);
                                ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/SoftSPI.h: In member function 'void SoftSPI<MisoPin, MosiPin, SckPin, Mode>::begin()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/DigitalPin.h:290:25: error: there are no arguments to 'fastPinMode' that depend on a template parameter, so a declaration of 'fastPinMode' must be available [-fpermissive]
   {fastPinMode(pin, mode); fastDigitalWrite(pin, level);}
                         ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/SoftSPI.h:55:5: note: in expansion of macro 'fastPinConfig'
     fastPinConfig(MisoPin, MISO_MODE, MISO_LEVEL);
     ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/DigitalPin.h:290:25: error: there are no arguments to 'fastPinMode' that depend on a template parameter, so a declaration of 'fastPinMode' must be available [-fpermissive]
   {fastPinMode(pin, mode); fastDigitalWrite(pin, level);}
                         ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/SoftSPI.h:56:5: note: in expansion of macro 'fastPinConfig'
     fastPinConfig(MosiPin, MOSI_MODE, !MODE_CPHA(Mode));
     ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/DigitalPin.h:290:25: error: there are no arguments to 'fastPinMode' that depend on a template parameter, so a declaration of 'fastPinMode' must be available [-fpermissive]
   {fastPinMode(pin, mode); fastDigitalWrite(pin, level);}
                         ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/SoftSPI.h:57:5: note: in expansion of macro 'fastPinConfig'
     fastPinConfig(SckPin, SCK_MODE, MODE_CPOL(Mode));
     ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/DigitalPin.h: In instantiation of 'void DigitalPin<PinNumber>::mode(uint8_t) [with unsigned char PinNumber = 13u; uint8_t = unsigned char]':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/examples/testDigitalPin/testDigitalPin.ino:9:20:   required from here
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/DigitalPin.h:352:16: error: 'fastPinMode' was not declared in this scope
     fastPinMode(PinNumber, mode);
                ^

examples/testFastDigital

Result: FAIL

In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/DigitalIO.h:31:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/examples/testFastDigital/testFastDigital.ino:2:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/DigitalPin.h:278:25: error: variable or field 'fastPinMode' declared void
 inline void fastPinMode(pin, mode) {
                         ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/DigitalPin.h:278:25: error: 'pin' was not declared in this scope
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/DigitalPin.h:278:30: error: 'mode' was not declared in this scope
 inline void fastPinMode(pin, mode) {
                              ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/DigitalPin.h: In member function 'void DigitalPin<PinNumber>::config(uint8_t, bool)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/DigitalPin.h:290:25: error: there are no arguments to 'fastPinMode' that depend on a template parameter, so a declaration of 'fastPinMode' must be available [-fpermissive]
   {fastPinMode(pin, mode); fastDigitalWrite(pin, level);}
                         ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/DigitalPin.h:328:5: note: in expansion of macro 'fastPinConfig'
     fastPinConfig(PinNumber, mode, level);
     ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/DigitalPin.h:290:25: note: (if you use '-fpermissive', G++ will accept your code, but allowing the use of an undeclared name is deprecated)
   {fastPinMode(pin, mode); fastDigitalWrite(pin, level);}
                         ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/DigitalPin.h:328:5: note: in expansion of macro 'fastPinConfig'
     fastPinConfig(PinNumber, mode, level);
     ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/DigitalPin.h: In member function 'void DigitalPin<PinNumber>::mode(uint8_t)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/DigitalPin.h:352:32: error: there are no arguments to 'fastPinMode' that depend on a template parameter, so a declaration of 'fastPinMode' must be available [-fpermissive]
     fastPinMode(PinNumber, mode);
                                ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/SoftSPI.h: In member function 'void SoftSPI<MisoPin, MosiPin, SckPin, Mode>::begin()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/DigitalPin.h:290:25: error: there are no arguments to 'fastPinMode' that depend on a template parameter, so a declaration of 'fastPinMode' must be available [-fpermissive]
   {fastPinMode(pin, mode); fastDigitalWrite(pin, level);}
                         ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/SoftSPI.h:55:5: note: in expansion of macro 'fastPinConfig'
     fastPinConfig(MisoPin, MISO_MODE, MISO_LEVEL);
     ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/DigitalPin.h:290:25: error: there are no arguments to 'fastPinMode' that depend on a template parameter, so a declaration of 'fastPinMode' must be available [-fpermissive]
   {fastPinMode(pin, mode); fastDigitalWrite(pin, level);}
                         ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/SoftSPI.h:56:5: note: in expansion of macro 'fastPinConfig'
     fastPinConfig(MosiPin, MOSI_MODE, !MODE_CPHA(Mode));
     ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/DigitalPin.h:290:25: error: there are no arguments to 'fastPinMode' that depend on a template parameter, so a declaration of 'fastPinMode' must be available [-fpermissive]
   {fastPinMode(pin, mode); fastDigitalWrite(pin, level);}
                         ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/SoftSPI.h:57:5: note: in expansion of macro 'fastPinConfig'
     fastPinConfig(SckPin, SCK_MODE, MODE_CPOL(Mode));
     ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/examples/testFastDigital/testFastDigital.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/examples/testFastDigital/testFastDigital.ino:5:26: error: 'fastPinMode' was not declared in this scope
   fastPinMode(PIN, OUTPUT);
                          ^

examples/testPinIO

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/examples/testPinIO/testPinIO.ino:23:2: error: #error AVR only example
 #error AVR only example
  ^

examples/testSoftSPI

Result: FAIL

In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/DigitalIO.h:31:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/examples/testSoftSPI/testSoftSPI.ino:2:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/DigitalPin.h:278:25: error: variable or field 'fastPinMode' declared void
 inline void fastPinMode(pin, mode) {
                         ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/DigitalPin.h:278:25: error: 'pin' was not declared in this scope
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/DigitalPin.h:278:30: error: 'mode' was not declared in this scope
 inline void fastPinMode(pin, mode) {
                              ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/DigitalPin.h: In member function 'void DigitalPin<PinNumber>::config(uint8_t, bool)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/DigitalPin.h:290:25: error: there are no arguments to 'fastPinMode' that depend on a template parameter, so a declaration of 'fastPinMode' must be available [-fpermissive]
   {fastPinMode(pin, mode); fastDigitalWrite(pin, level);}
                         ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/DigitalPin.h:328:5: note: in expansion of macro 'fastPinConfig'
     fastPinConfig(PinNumber, mode, level);
     ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/DigitalPin.h:290:25: note: (if you use '-fpermissive', G++ will accept your code, but allowing the use of an undeclared name is deprecated)
   {fastPinMode(pin, mode); fastDigitalWrite(pin, level);}
                         ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/DigitalPin.h:328:5: note: in expansion of macro 'fastPinConfig'
     fastPinConfig(PinNumber, mode, level);
     ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/DigitalPin.h: In member function 'void DigitalPin<PinNumber>::mode(uint8_t)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/DigitalPin.h:352:32: error: there are no arguments to 'fastPinMode' that depend on a template parameter, so a declaration of 'fastPinMode' must be available [-fpermissive]
     fastPinMode(PinNumber, mode);
                                ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/SoftSPI.h: In member function 'void SoftSPI<MisoPin, MosiPin, SckPin, Mode>::begin()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/DigitalPin.h:290:25: error: there are no arguments to 'fastPinMode' that depend on a template parameter, so a declaration of 'fastPinMode' must be available [-fpermissive]
   {fastPinMode(pin, mode); fastDigitalWrite(pin, level);}
                         ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/SoftSPI.h:55:5: note: in expansion of macro 'fastPinConfig'
     fastPinConfig(MisoPin, MISO_MODE, MISO_LEVEL);
     ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/DigitalPin.h:290:25: error: there are no arguments to 'fastPinMode' that depend on a template parameter, so a declaration of 'fastPinMode' must be available [-fpermissive]
   {fastPinMode(pin, mode); fastDigitalWrite(pin, level);}
                         ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/SoftSPI.h:56:5: note: in expansion of macro 'fastPinConfig'
     fastPinConfig(MosiPin, MOSI_MODE, !MODE_CPHA(Mode));
     ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/DigitalPin.h:290:25: error: there are no arguments to 'fastPinMode' that depend on a template parameter, so a declaration of 'fastPinMode' must be available [-fpermissive]
   {fastPinMode(pin, mode); fastDigitalWrite(pin, level);}
                         ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/SoftSPI.h:57:5: note: in expansion of macro 'fastPinConfig'
     fastPinConfig(SckPin, SCK_MODE, MODE_CPOL(Mode));
     ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/SoftSPI.h: In instantiation of 'void SoftSPI<MisoPin, MosiPin, SckPin, Mode>::begin() [with unsigned char MisoPin = 7u; unsigned char MosiPin = 8u; unsigned char SckPin = 9u; unsigned char Mode = 0u]':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/examples/testSoftSPI/testSoftSPI.ino:14:13:   required from here
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/DigitalPin.h:290:15: error: 'fastPinMode' was not declared in this scope
   {fastPinMode(pin, mode); fastDigitalWrite(pin, level);}
               ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/SoftSPI.h:55:5: note: in expansion of macro 'fastPinConfig'
     fastPinConfig(MisoPin, MISO_MODE, MISO_LEVEL);
     ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/DigitalPin.h:290:15: error: 'fastPinMode' was not declared in this scope
   {fastPinMode(pin, mode); fastDigitalWrite(pin, level);}
               ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/SoftSPI.h:56:5: note: in expansion of macro 'fastPinConfig'
     fastPinConfig(MosiPin, MOSI_MODE, !MODE_CPHA(Mode));
     ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/DigitalPin.h:290:15: error: 'fastPinMode' was not declared in this scope
   {fastPinMode(pin, mode); fastDigitalWrite(pin, level);}
               ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DigitalIO/src/SoftSPI.h:57:5: note: in expansion of macro 'fastPinConfig'
     fastPinConfig(SckPin, SCK_MODE, MODE_CPOL(Mode));
     ^