EByte LoRa E22 library - compatibility matrix

This report was generated on Wednesday, 23-Feb-22 22:48:15 CET using arduino-testlib.

EByte LoRa E22 library

Version: 1.0.3
More details

Compatibility matrix

Board	Claims compatibility	Inclusion	esp32_e22_setConfiguration	Arduino_e22_setConfiguration	esp32_06_SendFixedTransmissionWOR	esp32_e22_getConfiguration	esp8266_e22_07_sendBroadcastMessage	Arduino_MKR_Nano_33_e22_sendFixedTransmissionWOR	esp8266_e22_04_SendFixedTransmission	Arduino_e22_06_WakeUpFromWOR	esp32_e22_04_SendFixedTransmission	esp8266_e22_05_SendFixedTransmissionStructure	esp8266_e22_getConfiguration	esp8266_e22_setConfiguration	Arduino_e22_05_SendFixedTransmissionStructure	Arduino_e22_07_sendBroadcastMessage	esp8266_e22_03_SendTransparentStructure	esp32_e22_05_SendFixedTransmissionStructure	esp8266_e22_02_SendTransparent	esp32_e22_sendBroadcastMessage	Arduino_MKR_Nano_33_e22_01_setConfiguration	Arduino_e22_getConfiguration	esp32_e22_03_SendTransparentStructure	esp32_e22_05_sendFixedTransmissionStructurePartial	esp32_e22_SendTransparent	Arduino_MKR_Nano_33_e22_05_sendStructurePartial	Arduino_e22_04_SendFixedTransmission	Arduino_e22_08_receiveMessage	Arduino_e22_SendTransparent	esp8266_e22_06_WakeUpFromWOR
arduino:avr:uno 1.8.4	Yes	PASS	FAIL	PASS	FAIL	FAIL	FAIL	FAIL	FAIL	PASS	FAIL	FAIL	FAIL	FAIL	PASS	PASS	FAIL	FAIL	FAIL	FAIL	FAIL	PASS	FAIL	FAIL	FAIL	FAIL	PASS	PASS	PASS	FAIL
arduino:mbed_nano:nanorp2040connect 2.7.2	Yes ⚠️	FAIL	FAIL	FAIL	FAIL	FAIL	FAIL	FAIL	FAIL	FAIL	FAIL	FAIL	FAIL	FAIL	FAIL	FAIL	FAIL	FAIL	FAIL	FAIL	FAIL	FAIL	FAIL	FAIL	FAIL	FAIL	FAIL	FAIL	FAIL	FAIL
arduino:megaavr:nona4809 1.8.7	Yes	PASS	FAIL	PASS	FAIL	FAIL	FAIL	PASS	FAIL	FAIL	FAIL	FAIL	FAIL	FAIL	PASS	PASS	FAIL	FAIL	FAIL	FAIL	PASS	PASS	FAIL	FAIL	FAIL	PASS	PASS	PASS	PASS	FAIL
arduino:samd:mkrwifi1010 1.8.12	Yes	PASS	PASS	FAIL	FAIL	PASS	FAIL	PASS	FAIL	FAIL	PASS	FAIL	FAIL	FAIL	FAIL	FAIL	FAIL	PASS	FAIL	PASS	PASS	FAIL	PASS	PASS	FAIL	PASS	FAIL	FAIL	FAIL	FAIL
esp32:esp32:d1_mini32 1.0.6	Yes	PASS	PASS	FAIL	FAIL	PASS	FAIL	PASS	FAIL	FAIL	PASS	FAIL	FAIL	FAIL	FAIL	FAIL	FAIL	PASS	FAIL	PASS	PASS	FAIL	PASS	PASS	FAIL	PASS	FAIL	FAIL	FAIL	FAIL

Compilation logs

arduino:avr:uno @ 1.8.4

Inclusion

Result: PASS

Sketch uses 510 bytes (1%) of program storage space. Maximum is 32256 bytes.
Global variables use 11 bytes (0%) of dynamic memory, leaving 2037 bytes for local variables. Maximum is 2048 bytes.

examples/Arduino_MKR_Nano_33_e22_01_setConfiguration

Result: FAIL

/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/examples/Arduino_MKR_Nano_33_e22_01_setConfiguration/Arduino_MKR_Nano_33_e22_01_setConfiguration.ino:39:19: error: 'Serial1' was not declared in this scope
  LoRa_E22 e22ttl(&Serial1, 2, 4, 6); //  RX AUX M0 M1
                   ^~~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/examples/Arduino_MKR_Nano_33_e22_01_setConfiguration/Arduino_MKR_Nano_33_e22_01_setConfiguration.ino:39:19: note: suggested alternative: 'Serial'
  LoRa_E22 e22ttl(&Serial1, 2, 4, 6); //  RX AUX M0 M1
                   ^~~~~~~
                   Serial
Multiple libraries were found for "SoftwareSerial.h"
  Used: /Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/data/packages/arduino/hardware/avr/1.8.4/libraries/SoftwareSerial
  Not used: /Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/EspSoftwareSerial
  Not used: /Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/Dabble
  Not used: /Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/Printoo_Library

examples/Arduino_MKR_Nano_33_e22_05_sendStructurePartial

Result: FAIL

/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/examples/Arduino_MKR_Nano_33_e22_05_sendStructurePartial/Arduino_MKR_Nano_33_e22_05_sendStructurePartial.ino:70:19: error: 'Serial1' was not declared in this scope
  LoRa_E22 e22ttl(&Serial1, 2, 4, 6); //  RX AUX M0 M1
                   ^~~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/examples/Arduino_MKR_Nano_33_e22_05_sendStructurePartial/Arduino_MKR_Nano_33_e22_05_sendStructurePartial.ino:70:19: note: suggested alternative: 'Serial'
  LoRa_E22 e22ttl(&Serial1, 2, 4, 6); //  RX AUX M0 M1
                   ^~~~~~~
                   Serial
Multiple libraries were found for "SoftwareSerial.h"
  Used: /Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/data/packages/arduino/hardware/avr/1.8.4/libraries/SoftwareSerial
  Not used: /Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/EspSoftwareSerial
  Not used: /Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/Dabble
  Not used: /Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/Printoo_Library

examples/Arduino_MKR_Nano_33_e22_sendFixedTransmissionWOR

Result: FAIL

/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/examples/Arduino_MKR_Nano_33_e22_sendFixedTransmissionWOR/Arduino_MKR_Nano_33_e22_sendFixedTransmissionWOR.ino:61:19: error: 'Serial1' was not declared in this scope
  LoRa_E22 e22ttl(&Serial1, 2, 4, 6); //  RX AUX M0 M1
                   ^~~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/examples/Arduino_MKR_Nano_33_e22_sendFixedTransmissionWOR/Arduino_MKR_Nano_33_e22_sendFixedTransmissionWOR.ino:61:19: note: suggested alternative: 'Serial'
  LoRa_E22 e22ttl(&Serial1, 2, 4, 6); //  RX AUX M0 M1
                   ^~~~~~~
                   Serial
Multiple libraries were found for "SoftwareSerial.h"
  Used: /Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/data/packages/arduino/hardware/avr/1.8.4/libraries/SoftwareSerial
  Not used: /Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/Printoo_Library
  Not used: /Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/Dabble
  Not used: /Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/EspSoftwareSerial

examples/Arduino_e22_04_SendFixedTransmission

Result: PASS

Sketch uses 10792 bytes (33%) of program storage space. Maximum is 32256 bytes.
Global variables use 396 bytes (19%) of dynamic memory, leaving 1652 bytes for local variables. Maximum is 2048 bytes.

examples/Arduino_e22_05_SendFixedTransmissionStructure

Result: PASS

Sketch uses 8656 bytes (26%) of program storage space. Maximum is 32256 bytes.
Global variables use 379 bytes (18%) of dynamic memory, leaving 1669 bytes for local variables. Maximum is 2048 bytes.

examples/Arduino_e22_06_WakeUpFromWOR

Result: PASS

Sketch uses 7838 bytes (24%) of program storage space. Maximum is 32256 bytes.
Global variables use 403 bytes (19%) of dynamic memory, leaving 1645 bytes for local variables. Maximum is 2048 bytes.

examples/Arduino_e22_07_sendBroadcastMessage

Result: PASS

Sketch uses 7274 bytes (22%) of program storage space. Maximum is 32256 bytes.
Global variables use 350 bytes (17%) of dynamic memory, leaving 1698 bytes for local variables. Maximum is 2048 bytes.

examples/Arduino_e22_08_receiveMessage

Result: PASS

Sketch uses 7032 bytes (21%) of program storage space. Maximum is 32256 bytes.
Global variables use 306 bytes (14%) of dynamic memory, leaving 1742 bytes for local variables. Maximum is 2048 bytes.

examples/Arduino_e22_SendTransparent

Result: PASS

Sketch uses 7444 bytes (23%) of program storage space. Maximum is 32256 bytes.
Global variables use 358 bytes (17%) of dynamic memory, leaving 1690 bytes for local variables. Maximum is 2048 bytes.

examples/Arduino_e22_getConfiguration

Result: PASS

Sketch uses 10436 bytes (32%) of program storage space. Maximum is 32256 bytes.
Global variables use 352 bytes (17%) of dynamic memory, leaving 1696 bytes for local variables. Maximum is 2048 bytes.

examples/Arduino_e22_setConfiguration

Result: PASS

Sketch uses 10632 bytes (32%) of program storage space. Maximum is 32256 bytes.
Global variables use 352 bytes (17%) of dynamic memory, leaving 1696 bytes for local variables. Maximum is 2048 bytes.

examples/esp32_06_SendFixedTransmissionWOR

Result: FAIL

/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/examples/esp32_06_SendFixedTransmissionWOR/esp32_06_SendFixedTransmissionWOR.ino:69:19: error: 'Serial2' was not declared in this scope
  LoRa_E22 e22ttl(&Serial2, 15, 21, 19); //  RX AUX M0 M1
                   ^~~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/examples/esp32_06_SendFixedTransmissionWOR/esp32_06_SendFixedTransmissionWOR.ino:69:19: note: suggested alternative: 'Serial'
  LoRa_E22 e22ttl(&Serial2, 15, 21, 19); //  RX AUX M0 M1
                   ^~~~~~~
                   Serial
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/examples/esp32_06_SendFixedTransmissionWOR/esp32_06_SendFixedTransmissionWOR.ino: In function 'void loop()':
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/examples/esp32_06_SendFixedTransmissionWOR/esp32_06_SendFixedTransmissionWOR.ino:115:27: error: 'e220ttl' was not declared in this scope
   ResponseStatus rsSend = e220ttl.sendFixedMessage(0, DESTINATION_ADDL, 23, "We have received the message!");
                           ^~~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/examples/esp32_06_SendFixedTransmissionWOR/esp32_06_SendFixedTransmissionWOR.ino:115:27: note: suggested alternative: 'e22ttl'
   ResponseStatus rsSend = e220ttl.sendFixedMessage(0, DESTINATION_ADDL, 23, "We have received the message!");
                           ^~~~~~~
                           e22ttl
Multiple libraries were found for "SoftwareSerial.h"
  Used: /Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/data/packages/arduino/hardware/avr/1.8.4/libraries/SoftwareSerial
  Not used: /Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/Printoo_Library
  Not used: /Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/Dabble
  Not used: /Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/EspSoftwareSerial

examples/esp32_e22_03_SendTransparentStructure

Result: FAIL

/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/examples/esp32_e22_03_SendTransparentStructure/esp32_e22_03_SendTransparentStructure.ino:62:18: error: 'Serial2' was not declared in this scope
 LoRa_E22 e22ttl(&Serial2, 18, 21, 19); //  RX AUX M0 M1
                  ^~~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/examples/esp32_e22_03_SendTransparentStructure/esp32_e22_03_SendTransparentStructure.ino:62:18: note: suggested alternative: 'Serial'
 LoRa_E22 e22ttl(&Serial2, 18, 21, 19); //  RX AUX M0 M1
                  ^~~~~~~
                  Serial
Multiple libraries were found for "SoftwareSerial.h"
  Used: /Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/data/packages/arduino/hardware/avr/1.8.4/libraries/SoftwareSerial
  Not used: /Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/Dabble
  Not used: /Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/EspSoftwareSerial
  Not used: /Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/Printoo_Library

examples/esp32_e22_04_SendFixedTransmission

Result: FAIL

/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/examples/esp32_e22_04_SendFixedTransmission/esp32_e22_04_SendFixedTransmission.ino:69:18: error: 'Serial2' was not declared in this scope
 LoRa_E22 e22ttl(&Serial2, 18, 21, 19); //  RX AUX M0 M1
                  ^~~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/examples/esp32_e22_04_SendFixedTransmission/esp32_e22_04_SendFixedTransmission.ino:69:18: note: suggested alternative: 'Serial'
 LoRa_E22 e22ttl(&Serial2, 18, 21, 19); //  RX AUX M0 M1
                  ^~~~~~~
                  Serial
Multiple libraries were found for "SoftwareSerial.h"
  Used: /Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/data/packages/arduino/hardware/avr/1.8.4/libraries/SoftwareSerial
  Not used: /Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/Dabble
  Not used: /Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/Printoo_Library
  Not used: /Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/EspSoftwareSerial

examples/esp32_e22_05_SendFixedTransmissionStructure

Result: FAIL

/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/examples/esp32_e22_05_SendFixedTransmissionStructure/esp32_e22_05_SendFixedTransmissionStructure.ino:68:18: error: 'Serial2' was not declared in this scope
 LoRa_E22 e22ttl(&Serial2, 18, 21, 19); //  RX AUX M0 M1
                  ^~~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/examples/esp32_e22_05_SendFixedTransmissionStructure/esp32_e22_05_SendFixedTransmissionStructure.ino:68:18: note: suggested alternative: 'Serial'
 LoRa_E22 e22ttl(&Serial2, 18, 21, 19); //  RX AUX M0 M1
                  ^~~~~~~
                  Serial
Multiple libraries were found for "SoftwareSerial.h"
  Used: /Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/data/packages/arduino/hardware/avr/1.8.4/libraries/SoftwareSerial
  Not used: /Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/EspSoftwareSerial
  Not used: /Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/Printoo_Library
  Not used: /Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/Dabble

examples/esp32_e22_05_sendFixedTransmissionStructurePartial

Result: FAIL

/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/examples/esp32_e22_05_sendFixedTransmissionStructurePartial/esp32_e22_05_sendFixedTransmissionStructurePartial.ino:78:19: error: 'Serial2' was not declared in this scope
  LoRa_E22 e22ttl(&Serial2, 15, 21, 19); //  RX AUX M0 M1
                   ^~~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/examples/esp32_e22_05_sendFixedTransmissionStructurePartial/esp32_e22_05_sendFixedTransmissionStructurePartial.ino:78:19: note: suggested alternative: 'Serial'
  LoRa_E22 e22ttl(&Serial2, 15, 21, 19); //  RX AUX M0 M1
                   ^~~~~~~
                   Serial
Multiple libraries were found for "SoftwareSerial.h"
  Used: /Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/data/packages/arduino/hardware/avr/1.8.4/libraries/SoftwareSerial
  Not used: /Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/Printoo_Library
  Not used: /Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/Dabble
  Not used: /Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/EspSoftwareSerial

examples/esp32_e22_SendTransparent

Result: FAIL

/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/examples/esp32_e22_SendTransparent/esp32_e22_SendTransparent.ino:58:18: error: 'Serial2' was not declared in this scope
 LoRa_E22 e22ttl(&Serial2, 18, 21, 19); //  RX AUX M0 M1
                  ^~~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/examples/esp32_e22_SendTransparent/esp32_e22_SendTransparent.ino:58:18: note: suggested alternative: 'Serial'
 LoRa_E22 e22ttl(&Serial2, 18, 21, 19); //  RX AUX M0 M1
                  ^~~~~~~
                  Serial
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/examples/esp32_e22_SendTransparent/esp32_e22_SendTransparent.ino:64:16: error: redefinition of 'LoRa_E22 e22ttl'
 LoRa_E22 e22ttl(&Serial2, 18, 21, 19); //  RX AUX M0 M1
                ^
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/examples/esp32_e22_SendTransparent/esp32_e22_SendTransparent.ino:58:10: note: 'LoRa_E22 e22ttl' previously declared here
 LoRa_E22 e22ttl(&Serial2, 18, 21, 19); //  RX AUX M0 M1
          ^~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/examples/esp32_e22_SendTransparent/esp32_e22_SendTransparent.ino:64:18: error: 'Serial2' was not declared in this scope
 LoRa_E22 e22ttl(&Serial2, 18, 21, 19); //  RX AUX M0 M1
                  ^~~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/examples/esp32_e22_SendTransparent/esp32_e22_SendTransparent.ino:64:18: note: suggested alternative: 'Serial'
 LoRa_E22 e22ttl(&Serial2, 18, 21, 19); //  RX AUX M0 M1
                  ^~~~~~~
                  Serial
Multiple libraries were found for "SoftwareSerial.h"
  Used: /Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/data/packages/arduino/hardware/avr/1.8.4/libraries/SoftwareSerial
  Not used: /Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/Printoo_Library
  Not used: /Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/Dabble
  Not used: /Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/EspSoftwareSerial

examples/esp32_e22_getConfiguration

Result: FAIL

/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/examples/esp32_e22_getConfiguration/esp32_e22_getConfiguration.ino:48:18: error: 'Serial2' was not declared in this scope
 LoRa_E22 e22ttl(&Serial2, 18, 21, 19); //  RX AUX M0 M1
                  ^~~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/examples/esp32_e22_getConfiguration/esp32_e22_getConfiguration.ino:48:18: note: suggested alternative: 'Serial'
 LoRa_E22 e22ttl(&Serial2, 18, 21, 19); //  RX AUX M0 M1
                  ^~~~~~~
                  Serial
Multiple libraries were found for "SoftwareSerial.h"
  Used: /Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/data/packages/arduino/hardware/avr/1.8.4/libraries/SoftwareSerial
  Not used: /Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/EspSoftwareSerial
  Not used: /Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/Dabble
  Not used: /Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/Printoo_Library

examples/esp32_e22_sendBroadcastMessage

Result: FAIL

/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/examples/esp32_e22_sendBroadcastMessage/esp32_e22_sendBroadcastMessage.ino:70:18: error: 'Serial2' was not declared in this scope
 LoRa_E22 e22ttl(&Serial2, 18, 21, 19); //  RX AUX M0 M1
                  ^~~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/examples/esp32_e22_sendBroadcastMessage/esp32_e22_sendBroadcastMessage.ino:70:18: note: suggested alternative: 'Serial'
 LoRa_E22 e22ttl(&Serial2, 18, 21, 19); //  RX AUX M0 M1
                  ^~~~~~~
                  Serial
Multiple libraries were found for "SoftwareSerial.h"
  Used: /Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/data/packages/arduino/hardware/avr/1.8.4/libraries/SoftwareSerial
  Not used: /Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/Dabble
  Not used: /Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/EspSoftwareSerial
  Not used: /Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/Printoo_Library

examples/esp32_e22_setConfiguration

Result: FAIL

/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/examples/esp32_e22_setConfiguration/esp32_e22_setConfiguration.ino:48:18: error: 'Serial2' was not declared in this scope
 LoRa_E22 e22ttl(&Serial2, 18, 21, 19); //  RX AUX M0 M1
                  ^~~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/examples/esp32_e22_setConfiguration/esp32_e22_setConfiguration.ino:48:18: note: suggested alternative: 'Serial'
 LoRa_E22 e22ttl(&Serial2, 18, 21, 19); //  RX AUX M0 M1
                  ^~~~~~~
                  Serial
Multiple libraries were found for "SoftwareSerial.h"
  Used: /Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/data/packages/arduino/hardware/avr/1.8.4/libraries/SoftwareSerial
  Not used: /Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/EspSoftwareSerial
  Not used: /Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/Printoo_Library
  Not used: /Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/Dabble

examples/esp8266_e22_02_SendTransparent

Result: FAIL

/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/examples/esp8266_e22_02_SendTransparent/esp8266_e22_02_SendTransparent.ino:31:17: error: 'D3' was not declared in this scope
 LoRa_E22 e22ttl(D3, D4, D5, D7, D6); // Arduino RX <-- e22 TX, Arduino TX --> e22 RX AUX M0 M1
                 ^~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/examples/esp8266_e22_02_SendTransparent/esp8266_e22_02_SendTransparent.ino:31:17: note: suggested alternative: 'A3'
 LoRa_E22 e22ttl(D3, D4, D5, D7, D6); // Arduino RX <-- e22 TX, Arduino TX --> e22 RX AUX M0 M1
                 ^~
                 A3
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/examples/esp8266_e22_02_SendTransparent/esp8266_e22_02_SendTransparent.ino:31:21: error: 'D4' was not declared in this scope
 LoRa_E22 e22ttl(D3, D4, D5, D7, D6); // Arduino RX <-- e22 TX, Arduino TX --> e22 RX AUX M0 M1
                     ^~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/examples/esp8266_e22_02_SendTransparent/esp8266_e22_02_SendTransparent.ino:31:21: note: suggested alternative: 'A4'
 LoRa_E22 e22ttl(D3, D4, D5, D7, D6); // Arduino RX <-- e22 TX, Arduino TX --> e22 RX AUX M0 M1
                     ^~
                     A4
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/examples/esp8266_e22_02_SendTransparent/esp8266_e22_02_SendTransparent.ino:31:25: error: 'D5' was not declared in this scope
 LoRa_E22 e22ttl(D3, D4, D5, D7, D6); // Arduino RX <-- e22 TX, Arduino TX --> e22 RX AUX M0 M1
                         ^~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/examples/esp8266_e22_02_SendTransparent/esp8266_e22_02_SendTransparent.ino:31:25: note: suggested alternative: 'A5'
 LoRa_E22 e22ttl(D3, D4, D5, D7, D6); // Arduino RX <-- e22 TX, Arduino TX --> e22 RX AUX M0 M1
                         ^~
                         A5
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/examples/esp8266_e22_02_SendTransparent/esp8266_e22_02_SendTransparent.ino:31:29: error: 'D7' was not declared in this scope
 LoRa_E22 e22ttl(D3, D4, D5, D7, D6); // Arduino RX <-- e22 TX, Arduino TX --> e22 RX AUX M0 M1
                             ^~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/examples/esp8266_e22_02_SendTransparent/esp8266_e22_02_SendTransparent.ino:31:29: note: suggested alternative: 'A7'
 LoRa_E22 e22ttl(D3, D4, D5, D7, D6); // Arduino RX <-- e22 TX, Arduino TX --> e22 RX AUX M0 M1
                             ^~
                             A7
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/examples/esp8266_e22_02_SendTransparent/esp8266_e22_02_SendTransparent.ino:31:33: error: 'D6' was not declared in this scope
 LoRa_E22 e22ttl(D3, D4, D5, D7, D6); // Arduino RX <-- e22 TX, Arduino TX --> e22 RX AUX M0 M1
                                 ^~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/examples/esp8266_e22_02_SendTransparent/esp8266_e22_02_SendTransparent.ino:31:33: note: suggested alternative: 'A6'
 LoRa_E22 e22ttl(D3, D4, D5, D7, D6); // Arduino RX <-- e22 TX, Arduino TX --> e22 RX AUX M0 M1
                                 ^~
                                 A6
Multiple libraries were found for "SoftwareSerial.h"
  Used: /Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/data/packages/arduino/hardware/avr/1.8.4/libraries/SoftwareSerial
  Not used: /Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/Dabble
  Not used: /Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/EspSoftwareSerial
  Not used: /Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/Printoo_Library

examples/esp8266_e22_03_SendTransparentStructure

Result: FAIL

/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/examples/esp8266_e22_03_SendTransparentStructure/esp8266_e22_03_SendTransparentStructure.ino:34:17: error: 'D3' was not declared in this scope
 LoRa_E22 e22ttl(D3, D4, D5, D7, D6); // Arduino RX <-- e22 TX, Arduino TX --> e22 RX AUX M0 M1
                 ^~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/examples/esp8266_e22_03_SendTransparentStructure/esp8266_e22_03_SendTransparentStructure.ino:34:17: note: suggested alternative: 'A3'
 LoRa_E22 e22ttl(D3, D4, D5, D7, D6); // Arduino RX <-- e22 TX, Arduino TX --> e22 RX AUX M0 M1
                 ^~
                 A3
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/examples/esp8266_e22_03_SendTransparentStructure/esp8266_e22_03_SendTransparentStructure.ino:34:21: error: 'D4' was not declared in this scope
 LoRa_E22 e22ttl(D3, D4, D5, D7, D6); // Arduino RX <-- e22 TX, Arduino TX --> e22 RX AUX M0 M1
                     ^~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/examples/esp8266_e22_03_SendTransparentStructure/esp8266_e22_03_SendTransparentStructure.ino:34:21: note: suggested alternative: 'A4'
 LoRa_E22 e22ttl(D3, D4, D5, D7, D6); // Arduino RX <-- e22 TX, Arduino TX --> e22 RX AUX M0 M1
                     ^~
                     A4
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/examples/esp8266_e22_03_SendTransparentStructure/esp8266_e22_03_SendTransparentStructure.ino:34:25: error: 'D5' was not declared in this scope
 LoRa_E22 e22ttl(D3, D4, D5, D7, D6); // Arduino RX <-- e22 TX, Arduino TX --> e22 RX AUX M0 M1
                         ^~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/examples/esp8266_e22_03_SendTransparentStructure/esp8266_e22_03_SendTransparentStructure.ino:34:25: note: suggested alternative: 'A5'
 LoRa_E22 e22ttl(D3, D4, D5, D7, D6); // Arduino RX <-- e22 TX, Arduino TX --> e22 RX AUX M0 M1
                         ^~
                         A5
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/examples/esp8266_e22_03_SendTransparentStructure/esp8266_e22_03_SendTransparentStructure.ino:34:29: error: 'D7' was not declared in this scope
 LoRa_E22 e22ttl(D3, D4, D5, D7, D6); // Arduino RX <-- e22 TX, Arduino TX --> e22 RX AUX M0 M1
                             ^~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/examples/esp8266_e22_03_SendTransparentStructure/esp8266_e22_03_SendTransparentStructure.ino:34:29: note: suggested alternative: 'A7'
 LoRa_E22 e22ttl(D3, D4, D5, D7, D6); // Arduino RX <-- e22 TX, Arduino TX --> e22 RX AUX M0 M1
                             ^~
                             A7
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/examples/esp8266_e22_03_SendTransparentStructure/esp8266_e22_03_SendTransparentStructure.ino:34:33: error: 'D6' was not declared in this scope
 LoRa_E22 e22ttl(D3, D4, D5, D7, D6); // Arduino RX <-- e22 TX, Arduino TX --> e22 RX AUX M0 M1
                                 ^~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/examples/esp8266_e22_03_SendTransparentStructure/esp8266_e22_03_SendTransparentStructure.ino:34:33: note: suggested alternative: 'A6'
 LoRa_E22 e22ttl(D3, D4, D5, D7, D6); // Arduino RX <-- e22 TX, Arduino TX --> e22 RX AUX M0 M1
                                 ^~
                                 A6
Multiple libraries were found for "SoftwareSerial.h"
  Used: /Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/data/packages/arduino/hardware/avr/1.8.4/libraries/SoftwareSerial
  Not used: /Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/Printoo_Library
  Not used: /Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/Dabble
  Not used: /Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/EspSoftwareSerial

examples/esp8266_e22_04_SendFixedTransmission

Result: FAIL

/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/examples/esp8266_e22_04_SendFixedTransmission/esp8266_e22_04_SendFixedTransmission.ino:43:17: error: 'D3' was not declared in this scope
 LoRa_E22 e22ttl(D3, D4, D5, D7, D6); // Arduino RX <-- e22 TX, Arduino TX --> e22 RX AUX M0 M1
                 ^~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/examples/esp8266_e22_04_SendFixedTransmission/esp8266_e22_04_SendFixedTransmission.ino:43:17: note: suggested alternative: 'A3'
 LoRa_E22 e22ttl(D3, D4, D5, D7, D6); // Arduino RX <-- e22 TX, Arduino TX --> e22 RX AUX M0 M1
                 ^~
                 A3
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/examples/esp8266_e22_04_SendFixedTransmission/esp8266_e22_04_SendFixedTransmission.ino:43:21: error: 'D4' was not declared in this scope
 LoRa_E22 e22ttl(D3, D4, D5, D7, D6); // Arduino RX <-- e22 TX, Arduino TX --> e22 RX AUX M0 M1
                     ^~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/examples/esp8266_e22_04_SendFixedTransmission/esp8266_e22_04_SendFixedTransmission.ino:43:21: note: suggested alternative: 'A4'
 LoRa_E22 e22ttl(D3, D4, D5, D7, D6); // Arduino RX <-- e22 TX, Arduino TX --> e22 RX AUX M0 M1
                     ^~
                     A4
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/examples/esp8266_e22_04_SendFixedTransmission/esp8266_e22_04_SendFixedTransmission.ino:43:25: error: 'D5' was not declared in this scope
 LoRa_E22 e22ttl(D3, D4, D5, D7, D6); // Arduino RX <-- e22 TX, Arduino TX --> e22 RX AUX M0 M1
                         ^~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/examples/esp8266_e22_04_SendFixedTransmission/esp8266_e22_04_SendFixedTransmission.ino:43:25: note: suggested alternative: 'A5'
 LoRa_E22 e22ttl(D3, D4, D5, D7, D6); // Arduino RX <-- e22 TX, Arduino TX --> e22 RX AUX M0 M1
                         ^~
                         A5
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/examples/esp8266_e22_04_SendFixedTransmission/esp8266_e22_04_SendFixedTransmission.ino:43:29: error: 'D7' was not declared in this scope
 LoRa_E22 e22ttl(D3, D4, D5, D7, D6); // Arduino RX <-- e22 TX, Arduino TX --> e22 RX AUX M0 M1
                             ^~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/examples/esp8266_e22_04_SendFixedTransmission/esp8266_e22_04_SendFixedTransmission.ino:43:29: note: suggested alternative: 'A7'
 LoRa_E22 e22ttl(D3, D4, D5, D7, D6); // Arduino RX <-- e22 TX, Arduino TX --> e22 RX AUX M0 M1
                             ^~
                             A7
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/examples/esp8266_e22_04_SendFixedTransmission/esp8266_e22_04_SendFixedTransmission.ino:43:33: error: 'D6' was not declared in this scope
 LoRa_E22 e22ttl(D3, D4, D5, D7, D6); // Arduino RX <-- e22 TX, Arduino TX --> e22 RX AUX M0 M1
                                 ^~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/examples/esp8266_e22_04_SendFixedTransmission/esp8266_e22_04_SendFixedTransmission.ino:43:33: note: suggested alternative: 'A6'
 LoRa_E22 e22ttl(D3, D4, D5, D7, D6); // Arduino RX <-- e22 TX, Arduino TX --> e22 RX AUX M0 M1
                                 ^~
                                 A6
Multiple libraries were found for "SoftwareSerial.h"
  Used: /Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/data/packages/arduino/hardware/avr/1.8.4/libraries/SoftwareSerial
  Not used: /Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/EspSoftwareSerial
  Not used: /Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/Printoo_Library
  Not used: /Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/Dabble

examples/esp8266_e22_05_SendFixedTransmissionStructure

Result: FAIL

/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/examples/esp8266_e22_05_SendFixedTransmissionStructure/esp8266_e22_05_SendFixedTransmissionStructure.ino:43:17: error: 'D3' was not declared in this scope
 LoRa_E22 e22ttl(D3, D4, D5, D7, D6); // Arduino RX <-- e22 TX, Arduino TX --> e22 RX AUX M0 M1
                 ^~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/examples/esp8266_e22_05_SendFixedTransmissionStructure/esp8266_e22_05_SendFixedTransmissionStructure.ino:43:17: note: suggested alternative: 'A3'
 LoRa_E22 e22ttl(D3, D4, D5, D7, D6); // Arduino RX <-- e22 TX, Arduino TX --> e22 RX AUX M0 M1
                 ^~
                 A3
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/examples/esp8266_e22_05_SendFixedTransmissionStructure/esp8266_e22_05_SendFixedTransmissionStructure.ino:43:21: error: 'D4' was not declared in this scope
 LoRa_E22 e22ttl(D3, D4, D5, D7, D6); // Arduino RX <-- e22 TX, Arduino TX --> e22 RX AUX M0 M1
                     ^~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/examples/esp8266_e22_05_SendFixedTransmissionStructure/esp8266_e22_05_SendFixedTransmissionStructure.ino:43:21: note: suggested alternative: 'A4'
 LoRa_E22 e22ttl(D3, D4, D5, D7, D6); // Arduino RX <-- e22 TX, Arduino TX --> e22 RX AUX M0 M1
                     ^~
                     A4
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/examples/esp8266_e22_05_SendFixedTransmissionStructure/esp8266_e22_05_SendFixedTransmissionStructure.ino:43:25: error: 'D5' was not declared in this scope
 LoRa_E22 e22ttl(D3, D4, D5, D7, D6); // Arduino RX <-- e22 TX, Arduino TX --> e22 RX AUX M0 M1
                         ^~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/examples/esp8266_e22_05_SendFixedTransmissionStructure/esp8266_e22_05_SendFixedTransmissionStructure.ino:43:25: note: suggested alternative: 'A5'
 LoRa_E22 e22ttl(D3, D4, D5, D7, D6); // Arduino RX <-- e22 TX, Arduino TX --> e22 RX AUX M0 M1
                         ^~
                         A5
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/examples/esp8266_e22_05_SendFixedTransmissionStructure/esp8266_e22_05_SendFixedTransmissionStructure.ino:43:29: error: 'D7' was not declared in this scope
 LoRa_E22 e22ttl(D3, D4, D5, D7, D6); // Arduino RX <-- e22 TX, Arduino TX --> e22 RX AUX M0 M1
                             ^~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/examples/esp8266_e22_05_SendFixedTransmissionStructure/esp8266_e22_05_SendFixedTransmissionStructure.ino:43:29: note: suggested alternative: 'A7'
 LoRa_E22 e22ttl(D3, D4, D5, D7, D6); // Arduino RX <-- e22 TX, Arduino TX --> e22 RX AUX M0 M1
                             ^~
                             A7
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/examples/esp8266_e22_05_SendFixedTransmissionStructure/esp8266_e22_05_SendFixedTransmissionStructure.ino:43:33: error: 'D6' was not declared in this scope
 LoRa_E22 e22ttl(D3, D4, D5, D7, D6); // Arduino RX <-- e22 TX, Arduino TX --> e22 RX AUX M0 M1
                                 ^~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/examples/esp8266_e22_05_SendFixedTransmissionStructure/esp8266_e22_05_SendFixedTransmissionStructure.ino:43:33: note: suggested alternative: 'A6'
 LoRa_E22 e22ttl(D3, D4, D5, D7, D6); // Arduino RX <-- e22 TX, Arduino TX --> e22 RX AUX M0 M1
                                 ^~
                                 A6
Multiple libraries were found for "SoftwareSerial.h"
  Used: /Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/data/packages/arduino/hardware/avr/1.8.4/libraries/SoftwareSerial
  Not used: /Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/EspSoftwareSerial
  Not used: /Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/Printoo_Library
  Not used: /Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/Dabble

examples/esp8266_e22_06_WakeUpFromWOR

Result: FAIL

/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/examples/esp8266_e22_06_WakeUpFromWOR/esp8266_e22_06_WakeUpFromWOR.ino:38:10: fatal error: ESP8266WiFi.h: No such file or directory
 #include <ESP8266WiFi.h>
          ^~~~~~~~~~~~~~~
compilation terminated.
Multiple libraries were found for "SoftwareSerial.h"
  Used: /Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/data/packages/arduino/hardware/avr/1.8.4/libraries/SoftwareSerial
  Not used: /Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/Dabble
  Not used: /Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/Printoo_Library
  Not used: /Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/EspSoftwareSerial

examples/esp8266_e22_07_sendBroadcastMessage

Result: FAIL

/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/examples/esp8266_e22_07_sendBroadcastMessage/esp8266_e22_07_sendBroadcastMessage.ino:44:17: error: 'D3' was not declared in this scope
 LoRa_E22 e22ttl(D3, D4, D5, D7, D6); // Arduino RX <-- e22 TX, Arduino TX --> e22 RX AUX M0 M1
                 ^~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/examples/esp8266_e22_07_sendBroadcastMessage/esp8266_e22_07_sendBroadcastMessage.ino:44:17: note: suggested alternative: 'A3'
 LoRa_E22 e22ttl(D3, D4, D5, D7, D6); // Arduino RX <-- e22 TX, Arduino TX --> e22 RX AUX M0 M1
                 ^~
                 A3
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/examples/esp8266_e22_07_sendBroadcastMessage/esp8266_e22_07_sendBroadcastMessage.ino:44:21: error: 'D4' was not declared in this scope
 LoRa_E22 e22ttl(D3, D4, D5, D7, D6); // Arduino RX <-- e22 TX, Arduino TX --> e22 RX AUX M0 M1
                     ^~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/examples/esp8266_e22_07_sendBroadcastMessage/esp8266_e22_07_sendBroadcastMessage.ino:44:21: note: suggested alternative: 'A4'
 LoRa_E22 e22ttl(D3, D4, D5, D7, D6); // Arduino RX <-- e22 TX, Arduino TX --> e22 RX AUX M0 M1
                     ^~
                     A4
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/examples/esp8266_e22_07_sendBroadcastMessage/esp8266_e22_07_sendBroadcastMessage.ino:44:25: error: 'D5' was not declared in this scope
 LoRa_E22 e22ttl(D3, D4, D5, D7, D6); // Arduino RX <-- e22 TX, Arduino TX --> e22 RX AUX M0 M1
                         ^~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/examples/esp8266_e22_07_sendBroadcastMessage/esp8266_e22_07_sendBroadcastMessage.ino:44:25: note: suggested alternative: 'A5'
 LoRa_E22 e22ttl(D3, D4, D5, D7, D6); // Arduino RX <-- e22 TX, Arduino TX --> e22 RX AUX M0 M1
                         ^~
                         A5
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/examples/esp8266_e22_07_sendBroadcastMessage/esp8266_e22_07_sendBroadcastMessage.ino:44:29: error: 'D7' was not declared in this scope
 LoRa_E22 e22ttl(D3, D4, D5, D7, D6); // Arduino RX <-- e22 TX, Arduino TX --> e22 RX AUX M0 M1
                             ^~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/examples/esp8266_e22_07_sendBroadcastMessage/esp8266_e22_07_sendBroadcastMessage.ino:44:29: note: suggested alternative: 'A7'
 LoRa_E22 e22ttl(D3, D4, D5, D7, D6); // Arduino RX <-- e22 TX, Arduino TX --> e22 RX AUX M0 M1
                             ^~
                             A7
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/examples/esp8266_e22_07_sendBroadcastMessage/esp8266_e22_07_sendBroadcastMessage.ino:44:33: error: 'D6' was not declared in this scope
 LoRa_E22 e22ttl(D3, D4, D5, D7, D6); // Arduino RX <-- e22 TX, Arduino TX --> e22 RX AUX M0 M1
                                 ^~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/examples/esp8266_e22_07_sendBroadcastMessage/esp8266_e22_07_sendBroadcastMessage.ino:44:33: note: suggested alternative: 'A6'
 LoRa_E22 e22ttl(D3, D4, D5, D7, D6); // Arduino RX <-- e22 TX, Arduino TX --> e22 RX AUX M0 M1
                                 ^~
                                 A6
Multiple libraries were found for "SoftwareSerial.h"
  Used: /Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/data/packages/arduino/hardware/avr/1.8.4/libraries/SoftwareSerial
  Not used: /Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/Printoo_Library
  Not used: /Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/Dabble
  Not used: /Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/EspSoftwareSerial

examples/esp8266_e22_getConfiguration

Result: FAIL

/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/examples/esp8266_e22_getConfiguration/esp8266_e22_getConfiguration.ino:22:17: error: 'D3' was not declared in this scope
 LoRa_E22 e22ttl(D3, D4, D5, D7, D6); // Arduino RX <-- e22 TX, Arduino TX --> e22 RX AUX M0 M1
                 ^~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/examples/esp8266_e22_getConfiguration/esp8266_e22_getConfiguration.ino:22:17: note: suggested alternative: 'A3'
 LoRa_E22 e22ttl(D3, D4, D5, D7, D6); // Arduino RX <-- e22 TX, Arduino TX --> e22 RX AUX M0 M1
                 ^~
                 A3
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/examples/esp8266_e22_getConfiguration/esp8266_e22_getConfiguration.ino:22:21: error: 'D4' was not declared in this scope
 LoRa_E22 e22ttl(D3, D4, D5, D7, D6); // Arduino RX <-- e22 TX, Arduino TX --> e22 RX AUX M0 M1
                     ^~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/examples/esp8266_e22_getConfiguration/esp8266_e22_getConfiguration.ino:22:21: note: suggested alternative: 'A4'
 LoRa_E22 e22ttl(D3, D4, D5, D7, D6); // Arduino RX <-- e22 TX, Arduino TX --> e22 RX AUX M0 M1
                     ^~
                     A4
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/examples/esp8266_e22_getConfiguration/esp8266_e22_getConfiguration.ino:22:25: error: 'D5' was not declared in this scope
 LoRa_E22 e22ttl(D3, D4, D5, D7, D6); // Arduino RX <-- e22 TX, Arduino TX --> e22 RX AUX M0 M1
                         ^~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/examples/esp8266_e22_getConfiguration/esp8266_e22_getConfiguration.ino:22:25: note: suggested alternative: 'A5'
 LoRa_E22 e22ttl(D3, D4, D5, D7, D6); // Arduino RX <-- e22 TX, Arduino TX --> e22 RX AUX M0 M1
                         ^~
                         A5
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/examples/esp8266_e22_getConfiguration/esp8266_e22_getConfiguration.ino:22:29: error: 'D7' was not declared in this scope
 LoRa_E22 e22ttl(D3, D4, D5, D7, D6); // Arduino RX <-- e22 TX, Arduino TX --> e22 RX AUX M0 M1
                             ^~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/examples/esp8266_e22_getConfiguration/esp8266_e22_getConfiguration.ino:22:29: note: suggested alternative: 'A7'
 LoRa_E22 e22ttl(D3, D4, D5, D7, D6); // Arduino RX <-- e22 TX, Arduino TX --> e22 RX AUX M0 M1
                             ^~
                             A7
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/examples/esp8266_e22_getConfiguration/esp8266_e22_getConfiguration.ino:22:33: error: 'D6' was not declared in this scope
 LoRa_E22 e22ttl(D3, D4, D5, D7, D6); // Arduino RX <-- e22 TX, Arduino TX --> e22 RX AUX M0 M1
                                 ^~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/examples/esp8266_e22_getConfiguration/esp8266_e22_getConfiguration.ino:22:33: note: suggested alternative: 'A6'
 LoRa_E22 e22ttl(D3, D4, D5, D7, D6); // Arduino RX <-- e22 TX, Arduino TX --> e22 RX AUX M0 M1
                                 ^~
                                 A6
Multiple libraries were found for "SoftwareSerial.h"
  Used: /Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/data/packages/arduino/hardware/avr/1.8.4/libraries/SoftwareSerial
  Not used: /Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/EspSoftwareSerial
  Not used: /Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/Dabble
  Not used: /Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/Printoo_Library

examples/esp8266_e22_setConfiguration

Result: FAIL

/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/examples/esp8266_e22_setConfiguration/esp8266_e22_setConfiguration.ino:22:17: error: 'D3' was not declared in this scope
 LoRa_E22 e22ttl(D3, D4, D5, D7, D6); // Arduino RX <-- e22 TX, Arduino TX --> e22 RX AUX M0 M1
                 ^~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/examples/esp8266_e22_setConfiguration/esp8266_e22_setConfiguration.ino:22:17: note: suggested alternative: 'A3'
 LoRa_E22 e22ttl(D3, D4, D5, D7, D6); // Arduino RX <-- e22 TX, Arduino TX --> e22 RX AUX M0 M1
                 ^~
                 A3
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/examples/esp8266_e22_setConfiguration/esp8266_e22_setConfiguration.ino:22:21: error: 'D4' was not declared in this scope
 LoRa_E22 e22ttl(D3, D4, D5, D7, D6); // Arduino RX <-- e22 TX, Arduino TX --> e22 RX AUX M0 M1
                     ^~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/examples/esp8266_e22_setConfiguration/esp8266_e22_setConfiguration.ino:22:21: note: suggested alternative: 'A4'
 LoRa_E22 e22ttl(D3, D4, D5, D7, D6); // Arduino RX <-- e22 TX, Arduino TX --> e22 RX AUX M0 M1
                     ^~
                     A4
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/examples/esp8266_e22_setConfiguration/esp8266_e22_setConfiguration.ino:22:25: error: 'D5' was not declared in this scope
 LoRa_E22 e22ttl(D3, D4, D5, D7, D6); // Arduino RX <-- e22 TX, Arduino TX --> e22 RX AUX M0 M1
                         ^~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/examples/esp8266_e22_setConfiguration/esp8266_e22_setConfiguration.ino:22:25: note: suggested alternative: 'A5'
 LoRa_E22 e22ttl(D3, D4, D5, D7, D6); // Arduino RX <-- e22 TX, Arduino TX --> e22 RX AUX M0 M1
                         ^~
                         A5
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/examples/esp8266_e22_setConfiguration/esp8266_e22_setConfiguration.ino:22:29: error: 'D7' was not declared in this scope
 LoRa_E22 e22ttl(D3, D4, D5, D7, D6); // Arduino RX <-- e22 TX, Arduino TX --> e22 RX AUX M0 M1
                             ^~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/examples/esp8266_e22_setConfiguration/esp8266_e22_setConfiguration.ino:22:29: note: suggested alternative: 'A7'
 LoRa_E22 e22ttl(D3, D4, D5, D7, D6); // Arduino RX <-- e22 TX, Arduino TX --> e22 RX AUX M0 M1
                             ^~
                             A7
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/examples/esp8266_e22_setConfiguration/esp8266_e22_setConfiguration.ino:22:33: error: 'D6' was not declared in this scope
 LoRa_E22 e22ttl(D3, D4, D5, D7, D6); // Arduino RX <-- e22 TX, Arduino TX --> e22 RX AUX M0 M1
                                 ^~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/examples/esp8266_e22_setConfiguration/esp8266_e22_setConfiguration.ino:22:33: note: suggested alternative: 'A6'
 LoRa_E22 e22ttl(D3, D4, D5, D7, D6); // Arduino RX <-- e22 TX, Arduino TX --> e22 RX AUX M0 M1
                                 ^~
                                 A6
Multiple libraries were found for "SoftwareSerial.h"
  Used: /Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/data/packages/arduino/hardware/avr/1.8.4/libraries/SoftwareSerial
  Not used: /Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/Printoo_Library
  Not used: /Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/Dabble
  Not used: /Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/EspSoftwareSerial

arduino:mbed_nano:nanorp2040connect @ 2.7.2

Inclusion

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Dabble/src/SoftwareSerial.cpp:45:10: fatal error: util/delay_basic.h: No such file or directory
 #include <util/delay_basic.h>
          ^~~~~~~~~~~~~~~~~~~~
compilation terminated.
Multiple libraries were found for "SoftwareSerial.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Dabble
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Printoo_Library
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EspSoftwareSerial

examples/Arduino_MKR_Nano_33_e22_01_setConfiguration

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Dabble/src/SoftwareSerial.cpp:45:10: fatal error: util/delay_basic.h: No such file or directory
 #include <util/delay_basic.h>
          ^~~~~~~~~~~~~~~~~~~~
compilation terminated.
Multiple libraries were found for "SoftwareSerial.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Dabble
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Printoo_Library
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EspSoftwareSerial

examples/Arduino_MKR_Nano_33_e22_05_sendStructurePartial

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Dabble/src/SoftwareSerial.cpp:45:10: fatal error: util/delay_basic.h: No such file or directory
 #include <util/delay_basic.h>
          ^~~~~~~~~~~~~~~~~~~~
compilation terminated.
Multiple libraries were found for "SoftwareSerial.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Dabble
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Printoo_Library
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EspSoftwareSerial

examples/Arduino_MKR_Nano_33_e22_sendFixedTransmissionWOR

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Dabble/src/SoftwareSerial.cpp:45:10: fatal error: util/delay_basic.h: No such file or directory
 #include <util/delay_basic.h>
          ^~~~~~~~~~~~~~~~~~~~
compilation terminated.
Multiple libraries were found for "SoftwareSerial.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Dabble
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EspSoftwareSerial
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Printoo_Library

examples/Arduino_e22_04_SendFixedTransmission

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Dabble/src/SoftwareSerial.cpp:45:10: fatal error: util/delay_basic.h: No such file or directory
 #include <util/delay_basic.h>
          ^~~~~~~~~~~~~~~~~~~~
compilation terminated.
Multiple libraries were found for "SoftwareSerial.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Dabble
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Printoo_Library
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EspSoftwareSerial

examples/Arduino_e22_05_SendFixedTransmissionStructure

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Dabble/src/SoftwareSerial.cpp:45:10: fatal error: util/delay_basic.h: No such file or directory
 #include <util/delay_basic.h>
          ^~~~~~~~~~~~~~~~~~~~
compilation terminated.
Multiple libraries were found for "SoftwareSerial.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Dabble
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Printoo_Library
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EspSoftwareSerial

examples/Arduino_e22_06_WakeUpFromWOR

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Dabble/src/SoftwareSerial.cpp:45:10: fatal error: util/delay_basic.h: No such file or directory
 #include <util/delay_basic.h>
          ^~~~~~~~~~~~~~~~~~~~
compilation terminated.
Multiple libraries were found for "LowPower.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/LowPower_LowPowerLab
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Low-Power
Multiple libraries were found for "SoftwareSerial.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Dabble
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EspSoftwareSerial
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Printoo_Library

examples/Arduino_e22_07_sendBroadcastMessage

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Dabble/src/SoftwareSerial.cpp:45:10: fatal error: util/delay_basic.h: No such file or directory
 #include <util/delay_basic.h>
          ^~~~~~~~~~~~~~~~~~~~
compilation terminated.
Multiple libraries were found for "SoftwareSerial.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Dabble
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EspSoftwareSerial
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Printoo_Library

examples/Arduino_e22_08_receiveMessage

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Dabble/src/SoftwareSerial.cpp:45:10: fatal error: util/delay_basic.h: No such file or directory
 #include <util/delay_basic.h>
          ^~~~~~~~~~~~~~~~~~~~
compilation terminated.
Multiple libraries were found for "SoftwareSerial.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Dabble
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Printoo_Library
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EspSoftwareSerial

examples/Arduino_e22_SendTransparent

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Dabble/src/SoftwareSerial.cpp:45:10: fatal error: util/delay_basic.h: No such file or directory
 #include <util/delay_basic.h>
          ^~~~~~~~~~~~~~~~~~~~
compilation terminated.
Multiple libraries were found for "SoftwareSerial.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Dabble
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Printoo_Library
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EspSoftwareSerial

examples/Arduino_e22_getConfiguration

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Dabble/src/SoftwareSerial.cpp:45:10: fatal error: util/delay_basic.h: No such file or directory
 #include <util/delay_basic.h>
          ^~~~~~~~~~~~~~~~~~~~
compilation terminated.
Multiple libraries were found for "SoftwareSerial.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Dabble
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EspSoftwareSerial
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Printoo_Library

examples/Arduino_e22_setConfiguration

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Dabble/src/SoftwareSerial.cpp:45:10: fatal error: util/delay_basic.h: No such file or directory
 #include <util/delay_basic.h>
          ^~~~~~~~~~~~~~~~~~~~
compilation terminated.
Multiple libraries were found for "SoftwareSerial.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Dabble
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EspSoftwareSerial
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Printoo_Library

examples/esp32_06_SendFixedTransmissionWOR

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Dabble/src/SoftwareSerial.cpp:45:10: fatal error: util/delay_basic.h: No such file or directory
 #include <util/delay_basic.h>
          ^~~~~~~~~~~~~~~~~~~~
compilation terminated.
Multiple libraries were found for "SoftwareSerial.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Dabble
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Printoo_Library
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EspSoftwareSerial

examples/esp32_e22_03_SendTransparentStructure

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Dabble/src/SoftwareSerial.cpp:45:10: fatal error: util/delay_basic.h: No such file or directory
 #include <util/delay_basic.h>
          ^~~~~~~~~~~~~~~~~~~~
compilation terminated.
Multiple libraries were found for "SoftwareSerial.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Dabble
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Printoo_Library
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EspSoftwareSerial

examples/esp32_e22_04_SendFixedTransmission

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Dabble/src/SoftwareSerial.cpp:45:10: fatal error: util/delay_basic.h: No such file or directory
 #include <util/delay_basic.h>
          ^~~~~~~~~~~~~~~~~~~~
compilation terminated.
Multiple libraries were found for "SoftwareSerial.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Dabble
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Printoo_Library
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EspSoftwareSerial

examples/esp32_e22_05_SendFixedTransmissionStructure

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Dabble/src/SoftwareSerial.cpp:45:10: fatal error: util/delay_basic.h: No such file or directory
 #include <util/delay_basic.h>
          ^~~~~~~~~~~~~~~~~~~~
compilation terminated.
Multiple libraries were found for "SoftwareSerial.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Dabble
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Printoo_Library
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EspSoftwareSerial

examples/esp32_e22_05_sendFixedTransmissionStructurePartial

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Dabble/src/SoftwareSerial.cpp:45:10: fatal error: util/delay_basic.h: No such file or directory
 #include <util/delay_basic.h>
          ^~~~~~~~~~~~~~~~~~~~
compilation terminated.
Multiple libraries were found for "SoftwareSerial.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Dabble
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Printoo_Library
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EspSoftwareSerial

examples/esp32_e22_SendTransparent

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Dabble/src/SoftwareSerial.cpp:45:10: fatal error: util/delay_basic.h: No such file or directory
 #include <util/delay_basic.h>
          ^~~~~~~~~~~~~~~~~~~~
compilation terminated.
Multiple libraries were found for "SoftwareSerial.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Dabble
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EspSoftwareSerial
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Printoo_Library

examples/esp32_e22_getConfiguration

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Dabble/src/SoftwareSerial.cpp:45:10: fatal error: util/delay_basic.h: No such file or directory
 #include <util/delay_basic.h>
          ^~~~~~~~~~~~~~~~~~~~
compilation terminated.
Multiple libraries were found for "SoftwareSerial.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Dabble
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Printoo_Library
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EspSoftwareSerial

examples/esp32_e22_sendBroadcastMessage

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Dabble/src/SoftwareSerial.cpp:45:10: fatal error: util/delay_basic.h: No such file or directory
 #include <util/delay_basic.h>
          ^~~~~~~~~~~~~~~~~~~~
compilation terminated.
Multiple libraries were found for "SoftwareSerial.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Dabble
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EspSoftwareSerial
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Printoo_Library

examples/esp32_e22_setConfiguration

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Dabble/src/SoftwareSerial.cpp:45:10: fatal error: util/delay_basic.h: No such file or directory
 #include <util/delay_basic.h>
          ^~~~~~~~~~~~~~~~~~~~
compilation terminated.
Multiple libraries were found for "SoftwareSerial.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Dabble
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Printoo_Library
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EspSoftwareSerial

examples/esp8266_e22_02_SendTransparent

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Dabble/src/SoftwareSerial.cpp:45:10: fatal error: util/delay_basic.h: No such file or directory
 #include <util/delay_basic.h>
          ^~~~~~~~~~~~~~~~~~~~
compilation terminated.
Multiple libraries were found for "SoftwareSerial.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Dabble
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EspSoftwareSerial
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Printoo_Library

examples/esp8266_e22_03_SendTransparentStructure

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Dabble/src/SoftwareSerial.cpp:45:10: fatal error: util/delay_basic.h: No such file or directory
 #include <util/delay_basic.h>
          ^~~~~~~~~~~~~~~~~~~~
compilation terminated.
Multiple libraries were found for "SoftwareSerial.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Dabble
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EspSoftwareSerial
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Printoo_Library

examples/esp8266_e22_04_SendFixedTransmission

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Dabble/src/SoftwareSerial.cpp:45:10: fatal error: util/delay_basic.h: No such file or directory
 #include <util/delay_basic.h>
          ^~~~~~~~~~~~~~~~~~~~
compilation terminated.
Multiple libraries were found for "SoftwareSerial.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Dabble
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EspSoftwareSerial
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Printoo_Library

examples/esp8266_e22_05_SendFixedTransmissionStructure

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Dabble/src/SoftwareSerial.cpp:45:10: fatal error: util/delay_basic.h: No such file or directory
 #include <util/delay_basic.h>
          ^~~~~~~~~~~~~~~~~~~~
compilation terminated.
Multiple libraries were found for "SoftwareSerial.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Dabble
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Printoo_Library
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EspSoftwareSerial

examples/esp8266_e22_06_WakeUpFromWOR

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/examples/esp8266_e22_06_WakeUpFromWOR/esp8266_e22_06_WakeUpFromWOR.ino:38:10: fatal error: ESP8266WiFi.h: No such file or directory
 #include <ESP8266WiFi.h>
          ^~~~~~~~~~~~~~~
compilation terminated.
Multiple libraries were found for "SoftwareSerial.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Dabble
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EspSoftwareSerial
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Printoo_Library

examples/esp8266_e22_07_sendBroadcastMessage

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Dabble/src/SoftwareSerial.cpp:45:10: fatal error: util/delay_basic.h: No such file or directory
 #include <util/delay_basic.h>
          ^~~~~~~~~~~~~~~~~~~~
compilation terminated.
Multiple libraries were found for "SoftwareSerial.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Dabble
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Printoo_Library
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EspSoftwareSerial

examples/esp8266_e22_getConfiguration

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Dabble/src/SoftwareSerial.cpp:45:10: fatal error: util/delay_basic.h: No such file or directory
 #include <util/delay_basic.h>
          ^~~~~~~~~~~~~~~~~~~~
compilation terminated.
Multiple libraries were found for "SoftwareSerial.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Dabble
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Printoo_Library
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EspSoftwareSerial

examples/esp8266_e22_setConfiguration

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Dabble/src/SoftwareSerial.cpp:45:10: fatal error: util/delay_basic.h: No such file or directory
 #include <util/delay_basic.h>
          ^~~~~~~~~~~~~~~~~~~~
compilation terminated.
Multiple libraries were found for "SoftwareSerial.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Dabble
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Printoo_Library
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EspSoftwareSerial

arduino:megaavr:nona4809 @ 1.8.7

Inclusion

Result: PASS

Sketch uses 1354 bytes (2%) of program storage space. Maximum is 49152 bytes.
Global variables use 120 bytes (1%) of dynamic memory, leaving 6024 bytes for local variables. Maximum is 6144 bytes.

examples/Arduino_MKR_Nano_33_e22_01_setConfiguration

Result: PASS

Sketch uses 12031 bytes (24%) of program storage space. Maximum is 49152 bytes.
Global variables use 624 bytes (10%) of dynamic memory, leaving 5520 bytes for local variables. Maximum is 6144 bytes.

examples/Arduino_MKR_Nano_33_e22_05_sendStructurePartial

Result: PASS

Sketch uses 10591 bytes (21%) of program storage space. Maximum is 49152 bytes.
Global variables use 624 bytes (10%) of dynamic memory, leaving 5520 bytes for local variables. Maximum is 6144 bytes.

examples/Arduino_MKR_Nano_33_e22_sendFixedTransmissionWOR

Result: PASS

Sketch uses 8662 bytes (17%) of program storage space. Maximum is 49152 bytes.
Global variables use 624 bytes (10%) of dynamic memory, leaving 5520 bytes for local variables. Maximum is 6144 bytes.

examples/Arduino_e22_04_SendFixedTransmission

Result: PASS

Sketch uses 12044 bytes (24%) of program storage space. Maximum is 49152 bytes.
Global variables use 469 bytes (7%) of dynamic memory, leaving 5675 bytes for local variables. Maximum is 6144 bytes.

examples/Arduino_e22_05_SendFixedTransmissionStructure

Result: PASS

Sketch uses 9827 bytes (19%) of program storage space. Maximum is 49152 bytes.
Global variables use 486 bytes (7%) of dynamic memory, leaving 5658 bytes for local variables. Maximum is 6144 bytes.

examples/Arduino_e22_06_WakeUpFromWOR

Result: FAIL

WARNING: library LowPower_LowPowerLab claims to run on avr, samd architecture(s) and may be incompatible with your current board which runs on megaavr architecture(s).
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/examples/Arduino_e22_06_WakeUpFromWOR/Arduino_e22_06_WakeUpFromWOR.ino:38:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/LowPower_LowPowerLab/LowPower.h:148:6: error: #error "Please ensure chosen MCU is either 88, 168, 168P, 328P, 32U4, 2560 or 256RFR2."
     #error "Please ensure chosen MCU is either 88, 168, 168P, 328P, 32U4, 2560 or 256RFR2."
      ^~~~~
Multiple libraries were found for "SoftwareSerial.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/SoftwareSerial
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EspSoftwareSerial
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Dabble
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Printoo_Library
Multiple libraries were found for "LowPower.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/LowPower_LowPowerLab
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Low-Power

examples/Arduino_e22_07_sendBroadcastMessage

Result: PASS

Sketch uses 8502 bytes (17%) of program storage space. Maximum is 49152 bytes.
Global variables use 469 bytes (7%) of dynamic memory, leaving 5675 bytes for local variables. Maximum is 6144 bytes.

examples/Arduino_e22_08_receiveMessage

Result: PASS

Sketch uses 8273 bytes (16%) of program storage space. Maximum is 49152 bytes.
Global variables use 469 bytes (7%) of dynamic memory, leaving 5675 bytes for local variables. Maximum is 6144 bytes.

examples/Arduino_e22_SendTransparent

Result: PASS

Sketch uses 8685 bytes (17%) of program storage space. Maximum is 49152 bytes.
Global variables use 469 bytes (7%) of dynamic memory, leaving 5675 bytes for local variables. Maximum is 6144 bytes.

examples/Arduino_e22_getConfiguration

Result: PASS

Sketch uses 11697 bytes (23%) of program storage space. Maximum is 49152 bytes.
Global variables use 469 bytes (7%) of dynamic memory, leaving 5675 bytes for local variables. Maximum is 6144 bytes.

examples/Arduino_e22_setConfiguration

Result: PASS

Sketch uses 11867 bytes (24%) of program storage space. Maximum is 49152 bytes.
Global variables use 469 bytes (7%) of dynamic memory, leaving 5675 bytes for local variables. Maximum is 6144 bytes.

examples/esp32_06_SendFixedTransmissionWOR

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/examples/esp32_06_SendFixedTransmissionWOR/esp32_06_SendFixedTransmissionWOR.ino:69:19: error: 'Serial2' was not declared in this scope
  LoRa_E22 e22ttl(&Serial2, 15, 21, 19); //  RX AUX M0 M1
                   ^~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/examples/esp32_06_SendFixedTransmissionWOR/esp32_06_SendFixedTransmissionWOR.ino:69:19: note: suggested alternative: 'Serial1'
  LoRa_E22 e22ttl(&Serial2, 15, 21, 19); //  RX AUX M0 M1
                   ^~~~~~~
                   Serial1
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/examples/esp32_06_SendFixedTransmissionWOR/esp32_06_SendFixedTransmissionWOR.ino: In function 'void loop()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/examples/esp32_06_SendFixedTransmissionWOR/esp32_06_SendFixedTransmissionWOR.ino:115:27: error: 'e220ttl' was not declared in this scope
   ResponseStatus rsSend = e220ttl.sendFixedMessage(0, DESTINATION_ADDL, 23, "We have received the message!");
                           ^~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/examples/esp32_06_SendFixedTransmissionWOR/esp32_06_SendFixedTransmissionWOR.ino:115:27: note: suggested alternative: 'e22ttl'
   ResponseStatus rsSend = e220ttl.sendFixedMessage(0, DESTINATION_ADDL, 23, "We have received the message!");
                           ^~~~~~~
                           e22ttl
Multiple libraries were found for "SoftwareSerial.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/SoftwareSerial
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Printoo_Library
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Dabble
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EspSoftwareSerial

examples/esp32_e22_03_SendTransparentStructure

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/examples/esp32_e22_03_SendTransparentStructure/esp32_e22_03_SendTransparentStructure.ino:62:18: error: 'Serial2' was not declared in this scope
 LoRa_E22 e22ttl(&Serial2, 18, 21, 19); //  RX AUX M0 M1
                  ^~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/examples/esp32_e22_03_SendTransparentStructure/esp32_e22_03_SendTransparentStructure.ino:62:18: note: suggested alternative: 'Serial1'
 LoRa_E22 e22ttl(&Serial2, 18, 21, 19); //  RX AUX M0 M1
                  ^~~~~~~
                  Serial1
Multiple libraries were found for "SoftwareSerial.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/SoftwareSerial
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EspSoftwareSerial
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Printoo_Library
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Dabble

examples/esp32_e22_04_SendFixedTransmission

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/examples/esp32_e22_04_SendFixedTransmission/esp32_e22_04_SendFixedTransmission.ino:69:18: error: 'Serial2' was not declared in this scope
 LoRa_E22 e22ttl(&Serial2, 18, 21, 19); //  RX AUX M0 M1
                  ^~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/examples/esp32_e22_04_SendFixedTransmission/esp32_e22_04_SendFixedTransmission.ino:69:18: note: suggested alternative: 'Serial1'
 LoRa_E22 e22ttl(&Serial2, 18, 21, 19); //  RX AUX M0 M1
                  ^~~~~~~
                  Serial1
Multiple libraries were found for "SoftwareSerial.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/SoftwareSerial
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EspSoftwareSerial
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Dabble
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Printoo_Library

examples/esp32_e22_05_SendFixedTransmissionStructure

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/examples/esp32_e22_05_SendFixedTransmissionStructure/esp32_e22_05_SendFixedTransmissionStructure.ino:68:18: error: 'Serial2' was not declared in this scope
 LoRa_E22 e22ttl(&Serial2, 18, 21, 19); //  RX AUX M0 M1
                  ^~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/examples/esp32_e22_05_SendFixedTransmissionStructure/esp32_e22_05_SendFixedTransmissionStructure.ino:68:18: note: suggested alternative: 'Serial1'
 LoRa_E22 e22ttl(&Serial2, 18, 21, 19); //  RX AUX M0 M1
                  ^~~~~~~
                  Serial1
Multiple libraries were found for "SoftwareSerial.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/SoftwareSerial
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Dabble
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EspSoftwareSerial
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Printoo_Library

examples/esp32_e22_05_sendFixedTransmissionStructurePartial

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/examples/esp32_e22_05_sendFixedTransmissionStructurePartial/esp32_e22_05_sendFixedTransmissionStructurePartial.ino:78:19: error: 'Serial2' was not declared in this scope
  LoRa_E22 e22ttl(&Serial2, 15, 21, 19); //  RX AUX M0 M1
                   ^~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/examples/esp32_e22_05_sendFixedTransmissionStructurePartial/esp32_e22_05_sendFixedTransmissionStructurePartial.ino:78:19: note: suggested alternative: 'Serial1'
  LoRa_E22 e22ttl(&Serial2, 15, 21, 19); //  RX AUX M0 M1
                   ^~~~~~~
                   Serial1
Multiple libraries were found for "SoftwareSerial.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/SoftwareSerial
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EspSoftwareSerial
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Printoo_Library
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Dabble

examples/esp32_e22_SendTransparent

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/examples/esp32_e22_SendTransparent/esp32_e22_SendTransparent.ino:58:18: error: 'Serial2' was not declared in this scope
 LoRa_E22 e22ttl(&Serial2, 18, 21, 19); //  RX AUX M0 M1
                  ^~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/examples/esp32_e22_SendTransparent/esp32_e22_SendTransparent.ino:58:18: note: suggested alternative: 'Serial1'
 LoRa_E22 e22ttl(&Serial2, 18, 21, 19); //  RX AUX M0 M1
                  ^~~~~~~
                  Serial1
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/examples/esp32_e22_SendTransparent/esp32_e22_SendTransparent.ino:64:16: error: redefinition of 'LoRa_E22 e22ttl'
 LoRa_E22 e22ttl(&Serial2, 18, 21, 19); //  RX AUX M0 M1
                ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/examples/esp32_e22_SendTransparent/esp32_e22_SendTransparent.ino:58:10: note: 'LoRa_E22 e22ttl' previously declared here
 LoRa_E22 e22ttl(&Serial2, 18, 21, 19); //  RX AUX M0 M1
          ^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/examples/esp32_e22_SendTransparent/esp32_e22_SendTransparent.ino:64:18: error: 'Serial2' was not declared in this scope
 LoRa_E22 e22ttl(&Serial2, 18, 21, 19); //  RX AUX M0 M1
                  ^~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/examples/esp32_e22_SendTransparent/esp32_e22_SendTransparent.ino:64:18: note: suggested alternative: 'Serial1'
 LoRa_E22 e22ttl(&Serial2, 18, 21, 19); //  RX AUX M0 M1
                  ^~~~~~~
                  Serial1
Multiple libraries were found for "SoftwareSerial.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/SoftwareSerial
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Dabble
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Printoo_Library
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EspSoftwareSerial

examples/esp32_e22_getConfiguration

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/examples/esp32_e22_getConfiguration/esp32_e22_getConfiguration.ino:48:18: error: 'Serial2' was not declared in this scope
 LoRa_E22 e22ttl(&Serial2, 18, 21, 19); //  RX AUX M0 M1
                  ^~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/examples/esp32_e22_getConfiguration/esp32_e22_getConfiguration.ino:48:18: note: suggested alternative: 'Serial1'
 LoRa_E22 e22ttl(&Serial2, 18, 21, 19); //  RX AUX M0 M1
                  ^~~~~~~
                  Serial1
Multiple libraries were found for "SoftwareSerial.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/SoftwareSerial
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Printoo_Library
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EspSoftwareSerial
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Dabble

examples/esp32_e22_sendBroadcastMessage

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/examples/esp32_e22_sendBroadcastMessage/esp32_e22_sendBroadcastMessage.ino:70:18: error: 'Serial2' was not declared in this scope
 LoRa_E22 e22ttl(&Serial2, 18, 21, 19); //  RX AUX M0 M1
                  ^~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/examples/esp32_e22_sendBroadcastMessage/esp32_e22_sendBroadcastMessage.ino:70:18: note: suggested alternative: 'Serial1'
 LoRa_E22 e22ttl(&Serial2, 18, 21, 19); //  RX AUX M0 M1
                  ^~~~~~~
                  Serial1
Multiple libraries were found for "SoftwareSerial.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/SoftwareSerial
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EspSoftwareSerial
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Printoo_Library
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Dabble

examples/esp32_e22_setConfiguration

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/examples/esp32_e22_setConfiguration/esp32_e22_setConfiguration.ino:48:18: error: 'Serial2' was not declared in this scope
 LoRa_E22 e22ttl(&Serial2, 18, 21, 19); //  RX AUX M0 M1
                  ^~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/examples/esp32_e22_setConfiguration/esp32_e22_setConfiguration.ino:48:18: note: suggested alternative: 'Serial1'
 LoRa_E22 e22ttl(&Serial2, 18, 21, 19); //  RX AUX M0 M1
                  ^~~~~~~
                  Serial1
Multiple libraries were found for "SoftwareSerial.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/SoftwareSerial
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Dabble
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Printoo_Library
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EspSoftwareSerial

examples/esp8266_e22_02_SendTransparent

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/examples/esp8266_e22_02_SendTransparent/esp8266_e22_02_SendTransparent.ino:31:17: error: 'D3' was not declared in this scope
 LoRa_E22 e22ttl(D3, D4, D5, D7, D6); // Arduino RX <-- e22 TX, Arduino TX --> e22 RX AUX M0 M1
                 ^~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/examples/esp8266_e22_02_SendTransparent/esp8266_e22_02_SendTransparent.ino:31:17: note: suggested alternative: 'A3'
 LoRa_E22 e22ttl(D3, D4, D5, D7, D6); // Arduino RX <-- e22 TX, Arduino TX --> e22 RX AUX M0 M1
                 ^~
                 A3
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/examples/esp8266_e22_02_SendTransparent/esp8266_e22_02_SendTransparent.ino:31:21: error: 'D4' was not declared in this scope
 LoRa_E22 e22ttl(D3, D4, D5, D7, D6); // Arduino RX <-- e22 TX, Arduino TX --> e22 RX AUX M0 M1
                     ^~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/examples/esp8266_e22_02_SendTransparent/esp8266_e22_02_SendTransparent.ino:31:21: note: suggested alternative: 'A4'
 LoRa_E22 e22ttl(D3, D4, D5, D7, D6); // Arduino RX <-- e22 TX, Arduino TX --> e22 RX AUX M0 M1
                     ^~
                     A4
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/examples/esp8266_e22_02_SendTransparent/esp8266_e22_02_SendTransparent.ino:31:25: error: 'D5' was not declared in this scope
 LoRa_E22 e22ttl(D3, D4, D5, D7, D6); // Arduino RX <-- e22 TX, Arduino TX --> e22 RX AUX M0 M1
                         ^~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/examples/esp8266_e22_02_SendTransparent/esp8266_e22_02_SendTransparent.ino:31:25: note: suggested alternative: 'A5'
 LoRa_E22 e22ttl(D3, D4, D5, D7, D6); // Arduino RX <-- e22 TX, Arduino TX --> e22 RX AUX M0 M1
                         ^~
                         A5
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/examples/esp8266_e22_02_SendTransparent/esp8266_e22_02_SendTransparent.ino:31:29: error: 'D7' was not declared in this scope
 LoRa_E22 e22ttl(D3, D4, D5, D7, D6); // Arduino RX <-- e22 TX, Arduino TX --> e22 RX AUX M0 M1
                             ^~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/examples/esp8266_e22_02_SendTransparent/esp8266_e22_02_SendTransparent.ino:31:29: note: suggested alternative: 'A7'
 LoRa_E22 e22ttl(D3, D4, D5, D7, D6); // Arduino RX <-- e22 TX, Arduino TX --> e22 RX AUX M0 M1
                             ^~
                             A7
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/examples/esp8266_e22_02_SendTransparent/esp8266_e22_02_SendTransparent.ino:31:33: error: 'D6' was not declared in this scope
 LoRa_E22 e22ttl(D3, D4, D5, D7, D6); // Arduino RX <-- e22 TX, Arduino TX --> e22 RX AUX M0 M1
                                 ^~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/examples/esp8266_e22_02_SendTransparent/esp8266_e22_02_SendTransparent.ino:31:33: note: suggested alternative: 'A6'
 LoRa_E22 e22ttl(D3, D4, D5, D7, D6); // Arduino RX <-- e22 TX, Arduino TX --> e22 RX AUX M0 M1
                                 ^~
                                 A6
Multiple libraries were found for "SoftwareSerial.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/SoftwareSerial
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Printoo_Library
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EspSoftwareSerial
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Dabble

examples/esp8266_e22_03_SendTransparentStructure

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/examples/esp8266_e22_03_SendTransparentStructure/esp8266_e22_03_SendTransparentStructure.ino:34:17: error: 'D3' was not declared in this scope
 LoRa_E22 e22ttl(D3, D4, D5, D7, D6); // Arduino RX <-- e22 TX, Arduino TX --> e22 RX AUX M0 M1
                 ^~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/examples/esp8266_e22_03_SendTransparentStructure/esp8266_e22_03_SendTransparentStructure.ino:34:17: note: suggested alternative: 'A3'
 LoRa_E22 e22ttl(D3, D4, D5, D7, D6); // Arduino RX <-- e22 TX, Arduino TX --> e22 RX AUX M0 M1
                 ^~
                 A3
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/examples/esp8266_e22_03_SendTransparentStructure/esp8266_e22_03_SendTransparentStructure.ino:34:21: error: 'D4' was not declared in this scope
 LoRa_E22 e22ttl(D3, D4, D5, D7, D6); // Arduino RX <-- e22 TX, Arduino TX --> e22 RX AUX M0 M1
                     ^~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/examples/esp8266_e22_03_SendTransparentStructure/esp8266_e22_03_SendTransparentStructure.ino:34:21: note: suggested alternative: 'A4'
 LoRa_E22 e22ttl(D3, D4, D5, D7, D6); // Arduino RX <-- e22 TX, Arduino TX --> e22 RX AUX M0 M1
                     ^~
                     A4
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/examples/esp8266_e22_03_SendTransparentStructure/esp8266_e22_03_SendTransparentStructure.ino:34:25: error: 'D5' was not declared in this scope
 LoRa_E22 e22ttl(D3, D4, D5, D7, D6); // Arduino RX <-- e22 TX, Arduino TX --> e22 RX AUX M0 M1
                         ^~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/examples/esp8266_e22_03_SendTransparentStructure/esp8266_e22_03_SendTransparentStructure.ino:34:25: note: suggested alternative: 'A5'
 LoRa_E22 e22ttl(D3, D4, D5, D7, D6); // Arduino RX <-- e22 TX, Arduino TX --> e22 RX AUX M0 M1
                         ^~
                         A5
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/examples/esp8266_e22_03_SendTransparentStructure/esp8266_e22_03_SendTransparentStructure.ino:34:29: error: 'D7' was not declared in this scope
 LoRa_E22 e22ttl(D3, D4, D5, D7, D6); // Arduino RX <-- e22 TX, Arduino TX --> e22 RX AUX M0 M1
                             ^~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/examples/esp8266_e22_03_SendTransparentStructure/esp8266_e22_03_SendTransparentStructure.ino:34:29: note: suggested alternative: 'A7'
 LoRa_E22 e22ttl(D3, D4, D5, D7, D6); // Arduino RX <-- e22 TX, Arduino TX --> e22 RX AUX M0 M1
                             ^~
                             A7
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/examples/esp8266_e22_03_SendTransparentStructure/esp8266_e22_03_SendTransparentStructure.ino:34:33: error: 'D6' was not declared in this scope
 LoRa_E22 e22ttl(D3, D4, D5, D7, D6); // Arduino RX <-- e22 TX, Arduino TX --> e22 RX AUX M0 M1
                                 ^~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/examples/esp8266_e22_03_SendTransparentStructure/esp8266_e22_03_SendTransparentStructure.ino:34:33: note: suggested alternative: 'A6'
 LoRa_E22 e22ttl(D3, D4, D5, D7, D6); // Arduino RX <-- e22 TX, Arduino TX --> e22 RX AUX M0 M1
                                 ^~
                                 A6
Multiple libraries were found for "SoftwareSerial.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/SoftwareSerial
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Printoo_Library
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Dabble
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EspSoftwareSerial

examples/esp8266_e22_04_SendFixedTransmission

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/examples/esp8266_e22_04_SendFixedTransmission/esp8266_e22_04_SendFixedTransmission.ino:43:17: error: 'D3' was not declared in this scope
 LoRa_E22 e22ttl(D3, D4, D5, D7, D6); // Arduino RX <-- e22 TX, Arduino TX --> e22 RX AUX M0 M1
                 ^~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/examples/esp8266_e22_04_SendFixedTransmission/esp8266_e22_04_SendFixedTransmission.ino:43:17: note: suggested alternative: 'A3'
 LoRa_E22 e22ttl(D3, D4, D5, D7, D6); // Arduino RX <-- e22 TX, Arduino TX --> e22 RX AUX M0 M1
                 ^~
                 A3
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/examples/esp8266_e22_04_SendFixedTransmission/esp8266_e22_04_SendFixedTransmission.ino:43:21: error: 'D4' was not declared in this scope
 LoRa_E22 e22ttl(D3, D4, D5, D7, D6); // Arduino RX <-- e22 TX, Arduino TX --> e22 RX AUX M0 M1
                     ^~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/examples/esp8266_e22_04_SendFixedTransmission/esp8266_e22_04_SendFixedTransmission.ino:43:21: note: suggested alternative: 'A4'
 LoRa_E22 e22ttl(D3, D4, D5, D7, D6); // Arduino RX <-- e22 TX, Arduino TX --> e22 RX AUX M0 M1
                     ^~
                     A4
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/examples/esp8266_e22_04_SendFixedTransmission/esp8266_e22_04_SendFixedTransmission.ino:43:25: error: 'D5' was not declared in this scope
 LoRa_E22 e22ttl(D3, D4, D5, D7, D6); // Arduino RX <-- e22 TX, Arduino TX --> e22 RX AUX M0 M1
                         ^~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/examples/esp8266_e22_04_SendFixedTransmission/esp8266_e22_04_SendFixedTransmission.ino:43:25: note: suggested alternative: 'A5'
 LoRa_E22 e22ttl(D3, D4, D5, D7, D6); // Arduino RX <-- e22 TX, Arduino TX --> e22 RX AUX M0 M1
                         ^~
                         A5
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/examples/esp8266_e22_04_SendFixedTransmission/esp8266_e22_04_SendFixedTransmission.ino:43:29: error: 'D7' was not declared in this scope
 LoRa_E22 e22ttl(D3, D4, D5, D7, D6); // Arduino RX <-- e22 TX, Arduino TX --> e22 RX AUX M0 M1
                             ^~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/examples/esp8266_e22_04_SendFixedTransmission/esp8266_e22_04_SendFixedTransmission.ino:43:29: note: suggested alternative: 'A7'
 LoRa_E22 e22ttl(D3, D4, D5, D7, D6); // Arduino RX <-- e22 TX, Arduino TX --> e22 RX AUX M0 M1
                             ^~
                             A7
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/examples/esp8266_e22_04_SendFixedTransmission/esp8266_e22_04_SendFixedTransmission.ino:43:33: error: 'D6' was not declared in this scope
 LoRa_E22 e22ttl(D3, D4, D5, D7, D6); // Arduino RX <-- e22 TX, Arduino TX --> e22 RX AUX M0 M1
                                 ^~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/examples/esp8266_e22_04_SendFixedTransmission/esp8266_e22_04_SendFixedTransmission.ino:43:33: note: suggested alternative: 'A6'
 LoRa_E22 e22ttl(D3, D4, D5, D7, D6); // Arduino RX <-- e22 TX, Arduino TX --> e22 RX AUX M0 M1
                                 ^~
                                 A6
Multiple libraries were found for "SoftwareSerial.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/SoftwareSerial
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Dabble
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Printoo_Library
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EspSoftwareSerial

examples/esp8266_e22_05_SendFixedTransmissionStructure

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/examples/esp8266_e22_05_SendFixedTransmissionStructure/esp8266_e22_05_SendFixedTransmissionStructure.ino:43:17: error: 'D3' was not declared in this scope
 LoRa_E22 e22ttl(D3, D4, D5, D7, D6); // Arduino RX <-- e22 TX, Arduino TX --> e22 RX AUX M0 M1
                 ^~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/examples/esp8266_e22_05_SendFixedTransmissionStructure/esp8266_e22_05_SendFixedTransmissionStructure.ino:43:17: note: suggested alternative: 'A3'
 LoRa_E22 e22ttl(D3, D4, D5, D7, D6); // Arduino RX <-- e22 TX, Arduino TX --> e22 RX AUX M0 M1
                 ^~
                 A3
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/examples/esp8266_e22_05_SendFixedTransmissionStructure/esp8266_e22_05_SendFixedTransmissionStructure.ino:43:21: error: 'D4' was not declared in this scope
 LoRa_E22 e22ttl(D3, D4, D5, D7, D6); // Arduino RX <-- e22 TX, Arduino TX --> e22 RX AUX M0 M1
                     ^~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/examples/esp8266_e22_05_SendFixedTransmissionStructure/esp8266_e22_05_SendFixedTransmissionStructure.ino:43:21: note: suggested alternative: 'A4'
 LoRa_E22 e22ttl(D3, D4, D5, D7, D6); // Arduino RX <-- e22 TX, Arduino TX --> e22 RX AUX M0 M1
                     ^~
                     A4
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/examples/esp8266_e22_05_SendFixedTransmissionStructure/esp8266_e22_05_SendFixedTransmissionStructure.ino:43:25: error: 'D5' was not declared in this scope
 LoRa_E22 e22ttl(D3, D4, D5, D7, D6); // Arduino RX <-- e22 TX, Arduino TX --> e22 RX AUX M0 M1
                         ^~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/examples/esp8266_e22_05_SendFixedTransmissionStructure/esp8266_e22_05_SendFixedTransmissionStructure.ino:43:25: note: suggested alternative: 'A5'
 LoRa_E22 e22ttl(D3, D4, D5, D7, D6); // Arduino RX <-- e22 TX, Arduino TX --> e22 RX AUX M0 M1
                         ^~
                         A5
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/examples/esp8266_e22_05_SendFixedTransmissionStructure/esp8266_e22_05_SendFixedTransmissionStructure.ino:43:29: error: 'D7' was not declared in this scope
 LoRa_E22 e22ttl(D3, D4, D5, D7, D6); // Arduino RX <-- e22 TX, Arduino TX --> e22 RX AUX M0 M1
                             ^~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/examples/esp8266_e22_05_SendFixedTransmissionStructure/esp8266_e22_05_SendFixedTransmissionStructure.ino:43:29: note: suggested alternative: 'A7'
 LoRa_E22 e22ttl(D3, D4, D5, D7, D6); // Arduino RX <-- e22 TX, Arduino TX --> e22 RX AUX M0 M1
                             ^~
                             A7
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/examples/esp8266_e22_05_SendFixedTransmissionStructure/esp8266_e22_05_SendFixedTransmissionStructure.ino:43:33: error: 'D6' was not declared in this scope
 LoRa_E22 e22ttl(D3, D4, D5, D7, D6); // Arduino RX <-- e22 TX, Arduino TX --> e22 RX AUX M0 M1
                                 ^~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/examples/esp8266_e22_05_SendFixedTransmissionStructure/esp8266_e22_05_SendFixedTransmissionStructure.ino:43:33: note: suggested alternative: 'A6'
 LoRa_E22 e22ttl(D3, D4, D5, D7, D6); // Arduino RX <-- e22 TX, Arduino TX --> e22 RX AUX M0 M1
                                 ^~
                                 A6
Multiple libraries were found for "SoftwareSerial.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/SoftwareSerial
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Dabble
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Printoo_Library
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EspSoftwareSerial

examples/esp8266_e22_06_WakeUpFromWOR

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/examples/esp8266_e22_06_WakeUpFromWOR/esp8266_e22_06_WakeUpFromWOR.ino:38:10: fatal error: ESP8266WiFi.h: No such file or directory
 #include <ESP8266WiFi.h>
          ^~~~~~~~~~~~~~~
compilation terminated.
Multiple libraries were found for "SoftwareSerial.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/SoftwareSerial
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EspSoftwareSerial
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Printoo_Library
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Dabble

examples/esp8266_e22_07_sendBroadcastMessage

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/examples/esp8266_e22_07_sendBroadcastMessage/esp8266_e22_07_sendBroadcastMessage.ino:44:17: error: 'D3' was not declared in this scope
 LoRa_E22 e22ttl(D3, D4, D5, D7, D6); // Arduino RX <-- e22 TX, Arduino TX --> e22 RX AUX M0 M1
                 ^~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/examples/esp8266_e22_07_sendBroadcastMessage/esp8266_e22_07_sendBroadcastMessage.ino:44:17: note: suggested alternative: 'A3'
 LoRa_E22 e22ttl(D3, D4, D5, D7, D6); // Arduino RX <-- e22 TX, Arduino TX --> e22 RX AUX M0 M1
                 ^~
                 A3
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/examples/esp8266_e22_07_sendBroadcastMessage/esp8266_e22_07_sendBroadcastMessage.ino:44:21: error: 'D4' was not declared in this scope
 LoRa_E22 e22ttl(D3, D4, D5, D7, D6); // Arduino RX <-- e22 TX, Arduino TX --> e22 RX AUX M0 M1
                     ^~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/examples/esp8266_e22_07_sendBroadcastMessage/esp8266_e22_07_sendBroadcastMessage.ino:44:21: note: suggested alternative: 'A4'
 LoRa_E22 e22ttl(D3, D4, D5, D7, D6); // Arduino RX <-- e22 TX, Arduino TX --> e22 RX AUX M0 M1
                     ^~
                     A4
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/examples/esp8266_e22_07_sendBroadcastMessage/esp8266_e22_07_sendBroadcastMessage.ino:44:25: error: 'D5' was not declared in this scope
 LoRa_E22 e22ttl(D3, D4, D5, D7, D6); // Arduino RX <-- e22 TX, Arduino TX --> e22 RX AUX M0 M1
                         ^~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/examples/esp8266_e22_07_sendBroadcastMessage/esp8266_e22_07_sendBroadcastMessage.ino:44:25: note: suggested alternative: 'A5'
 LoRa_E22 e22ttl(D3, D4, D5, D7, D6); // Arduino RX <-- e22 TX, Arduino TX --> e22 RX AUX M0 M1
                         ^~
                         A5
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/examples/esp8266_e22_07_sendBroadcastMessage/esp8266_e22_07_sendBroadcastMessage.ino:44:29: error: 'D7' was not declared in this scope
 LoRa_E22 e22ttl(D3, D4, D5, D7, D6); // Arduino RX <-- e22 TX, Arduino TX --> e22 RX AUX M0 M1
                             ^~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/examples/esp8266_e22_07_sendBroadcastMessage/esp8266_e22_07_sendBroadcastMessage.ino:44:29: note: suggested alternative: 'A7'
 LoRa_E22 e22ttl(D3, D4, D5, D7, D6); // Arduino RX <-- e22 TX, Arduino TX --> e22 RX AUX M0 M1
                             ^~
                             A7
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/examples/esp8266_e22_07_sendBroadcastMessage/esp8266_e22_07_sendBroadcastMessage.ino:44:33: error: 'D6' was not declared in this scope
 LoRa_E22 e22ttl(D3, D4, D5, D7, D6); // Arduino RX <-- e22 TX, Arduino TX --> e22 RX AUX M0 M1
                                 ^~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/examples/esp8266_e22_07_sendBroadcastMessage/esp8266_e22_07_sendBroadcastMessage.ino:44:33: note: suggested alternative: 'A6'
 LoRa_E22 e22ttl(D3, D4, D5, D7, D6); // Arduino RX <-- e22 TX, Arduino TX --> e22 RX AUX M0 M1
                                 ^~
                                 A6
Multiple libraries were found for "SoftwareSerial.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/SoftwareSerial
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EspSoftwareSerial
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Dabble
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Printoo_Library

examples/esp8266_e22_getConfiguration

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/examples/esp8266_e22_getConfiguration/esp8266_e22_getConfiguration.ino:22:17: error: 'D3' was not declared in this scope
 LoRa_E22 e22ttl(D3, D4, D5, D7, D6); // Arduino RX <-- e22 TX, Arduino TX --> e22 RX AUX M0 M1
                 ^~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/examples/esp8266_e22_getConfiguration/esp8266_e22_getConfiguration.ino:22:17: note: suggested alternative: 'A3'
 LoRa_E22 e22ttl(D3, D4, D5, D7, D6); // Arduino RX <-- e22 TX, Arduino TX --> e22 RX AUX M0 M1
                 ^~
                 A3
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/examples/esp8266_e22_getConfiguration/esp8266_e22_getConfiguration.ino:22:21: error: 'D4' was not declared in this scope
 LoRa_E22 e22ttl(D3, D4, D5, D7, D6); // Arduino RX <-- e22 TX, Arduino TX --> e22 RX AUX M0 M1
                     ^~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/examples/esp8266_e22_getConfiguration/esp8266_e22_getConfiguration.ino:22:21: note: suggested alternative: 'A4'
 LoRa_E22 e22ttl(D3, D4, D5, D7, D6); // Arduino RX <-- e22 TX, Arduino TX --> e22 RX AUX M0 M1
                     ^~
                     A4
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/examples/esp8266_e22_getConfiguration/esp8266_e22_getConfiguration.ino:22:25: error: 'D5' was not declared in this scope
 LoRa_E22 e22ttl(D3, D4, D5, D7, D6); // Arduino RX <-- e22 TX, Arduino TX --> e22 RX AUX M0 M1
                         ^~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/examples/esp8266_e22_getConfiguration/esp8266_e22_getConfiguration.ino:22:25: note: suggested alternative: 'A5'
 LoRa_E22 e22ttl(D3, D4, D5, D7, D6); // Arduino RX <-- e22 TX, Arduino TX --> e22 RX AUX M0 M1
                         ^~
                         A5
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/examples/esp8266_e22_getConfiguration/esp8266_e22_getConfiguration.ino:22:29: error: 'D7' was not declared in this scope
 LoRa_E22 e22ttl(D3, D4, D5, D7, D6); // Arduino RX <-- e22 TX, Arduino TX --> e22 RX AUX M0 M1
                             ^~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/examples/esp8266_e22_getConfiguration/esp8266_e22_getConfiguration.ino:22:29: note: suggested alternative: 'A7'
 LoRa_E22 e22ttl(D3, D4, D5, D7, D6); // Arduino RX <-- e22 TX, Arduino TX --> e22 RX AUX M0 M1
                             ^~
                             A7
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/examples/esp8266_e22_getConfiguration/esp8266_e22_getConfiguration.ino:22:33: error: 'D6' was not declared in this scope
 LoRa_E22 e22ttl(D3, D4, D5, D7, D6); // Arduino RX <-- e22 TX, Arduino TX --> e22 RX AUX M0 M1
                                 ^~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/examples/esp8266_e22_getConfiguration/esp8266_e22_getConfiguration.ino:22:33: note: suggested alternative: 'A6'
 LoRa_E22 e22ttl(D3, D4, D5, D7, D6); // Arduino RX <-- e22 TX, Arduino TX --> e22 RX AUX M0 M1
                                 ^~
                                 A6
Multiple libraries were found for "SoftwareSerial.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/SoftwareSerial
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EspSoftwareSerial
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Dabble
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Printoo_Library

examples/esp8266_e22_setConfiguration

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/examples/esp8266_e22_setConfiguration/esp8266_e22_setConfiguration.ino:22:17: error: 'D3' was not declared in this scope
 LoRa_E22 e22ttl(D3, D4, D5, D7, D6); // Arduino RX <-- e22 TX, Arduino TX --> e22 RX AUX M0 M1
                 ^~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/examples/esp8266_e22_setConfiguration/esp8266_e22_setConfiguration.ino:22:17: note: suggested alternative: 'A3'
 LoRa_E22 e22ttl(D3, D4, D5, D7, D6); // Arduino RX <-- e22 TX, Arduino TX --> e22 RX AUX M0 M1
                 ^~
                 A3
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/examples/esp8266_e22_setConfiguration/esp8266_e22_setConfiguration.ino:22:21: error: 'D4' was not declared in this scope
 LoRa_E22 e22ttl(D3, D4, D5, D7, D6); // Arduino RX <-- e22 TX, Arduino TX --> e22 RX AUX M0 M1
                     ^~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/examples/esp8266_e22_setConfiguration/esp8266_e22_setConfiguration.ino:22:21: note: suggested alternative: 'A4'
 LoRa_E22 e22ttl(D3, D4, D5, D7, D6); // Arduino RX <-- e22 TX, Arduino TX --> e22 RX AUX M0 M1
                     ^~
                     A4
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/examples/esp8266_e22_setConfiguration/esp8266_e22_setConfiguration.ino:22:25: error: 'D5' was not declared in this scope
 LoRa_E22 e22ttl(D3, D4, D5, D7, D6); // Arduino RX <-- e22 TX, Arduino TX --> e22 RX AUX M0 M1
                         ^~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/examples/esp8266_e22_setConfiguration/esp8266_e22_setConfiguration.ino:22:25: note: suggested alternative: 'A5'
 LoRa_E22 e22ttl(D3, D4, D5, D7, D6); // Arduino RX <-- e22 TX, Arduino TX --> e22 RX AUX M0 M1
                         ^~
                         A5
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/examples/esp8266_e22_setConfiguration/esp8266_e22_setConfiguration.ino:22:29: error: 'D7' was not declared in this scope
 LoRa_E22 e22ttl(D3, D4, D5, D7, D6); // Arduino RX <-- e22 TX, Arduino TX --> e22 RX AUX M0 M1
                             ^~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/examples/esp8266_e22_setConfiguration/esp8266_e22_setConfiguration.ino:22:29: note: suggested alternative: 'A7'
 LoRa_E22 e22ttl(D3, D4, D5, D7, D6); // Arduino RX <-- e22 TX, Arduino TX --> e22 RX AUX M0 M1
                             ^~
                             A7
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/examples/esp8266_e22_setConfiguration/esp8266_e22_setConfiguration.ino:22:33: error: 'D6' was not declared in this scope
 LoRa_E22 e22ttl(D3, D4, D5, D7, D6); // Arduino RX <-- e22 TX, Arduino TX --> e22 RX AUX M0 M1
                                 ^~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/examples/esp8266_e22_setConfiguration/esp8266_e22_setConfiguration.ino:22:33: note: suggested alternative: 'A6'
 LoRa_E22 e22ttl(D3, D4, D5, D7, D6); // Arduino RX <-- e22 TX, Arduino TX --> e22 RX AUX M0 M1
                                 ^~
                                 A6
Multiple libraries were found for "SoftwareSerial.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/SoftwareSerial
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EspSoftwareSerial
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Printoo_Library
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Dabble

arduino:samd:mkrwifi1010 @ 1.8.12

Inclusion

Result: PASS

Sketch uses 12156 bytes (4%) of program storage space. Maximum is 262144 bytes.
Global variables use 2996 bytes (9%) of dynamic memory, leaving 29772 bytes for local variables. Maximum is 32768 bytes.

examples/Arduino_MKR_Nano_33_e22_01_setConfiguration

Result: PASS

Sketch uses 17844 bytes (6%) of program storage space. Maximum is 262144 bytes.
Global variables use 3024 bytes (9%) of dynamic memory, leaving 29744 bytes for local variables. Maximum is 32768 bytes.

examples/Arduino_MKR_Nano_33_e22_05_sendStructurePartial

Result: PASS

Sketch uses 23152 bytes (8%) of program storage space. Maximum is 262144 bytes.
Global variables use 3024 bytes (9%) of dynamic memory, leaving 29744 bytes for local variables. Maximum is 32768 bytes.

examples/Arduino_MKR_Nano_33_e22_sendFixedTransmissionWOR

Result: PASS

Sketch uses 14824 bytes (5%) of program storage space. Maximum is 262144 bytes.
Global variables use 3024 bytes (9%) of dynamic memory, leaving 29744 bytes for local variables. Maximum is 32768 bytes.

examples/Arduino_e22_04_SendFixedTransmission

Result: FAIL

/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/examples/Arduino_e22_04_SendFixedTransmission/Arduino_e22_04_SendFixedTransmission.ino:53:30: error: invalid conversion from 'int' to 'arduino::HardwareSerial*' [-fpermissive]
 LoRa_E22 e22ttl(4, 5, 3, 7, 6); // Arduino RX <-- e22 TX, Arduino TX --> e22 RX AUX M0 M1
                              ^
In file included from /Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/examples/Arduino_e22_04_SendFixedTransmission/Arduino_e22_04_SendFixedTransmission.ino:40:0:
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/LoRa_E22.h:268:3: note:   initializing argument 1 of 'LoRa_E22::LoRa_E22(arduino::HardwareSerial*, byte, byte, byte, UART_BPS_RATE)'
   LoRa_E22(HardwareSerial* serial, byte auxPin, byte m0Pin, byte m1Pin, UART_BPS_RATE bpsRate = UART_BPS_RATE_9600);
   ^~~~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/examples/Arduino_e22_04_SendFixedTransmission/Arduino_e22_04_SendFixedTransmission.ino:53:30: error: invalid conversion from 'int' to 'UART_BPS_RATE' [-fpermissive]
 LoRa_E22 e22ttl(4, 5, 3, 7, 6); // Arduino RX <-- e22 TX, Arduino TX --> e22 RX AUX M0 M1
                              ^
In file included from /Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/examples/Arduino_e22_04_SendFixedTransmission/Arduino_e22_04_SendFixedTransmission.ino:40:0:
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/LoRa_E22.h:268:3: note:   initializing argument 5 of 'LoRa_E22::LoRa_E22(arduino::HardwareSerial*, byte, byte, byte, UART_BPS_RATE)'
   LoRa_E22(HardwareSerial* serial, byte auxPin, byte m0Pin, byte m1Pin, UART_BPS_RATE bpsRate = UART_BPS_RATE_9600);
   ^~~~~~~~

examples/Arduino_e22_05_SendFixedTransmissionStructure

Result: FAIL

/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/examples/Arduino_e22_05_SendFixedTransmissionStructure/Arduino_e22_05_SendFixedTransmissionStructure.ino:56:30: error: invalid conversion from 'int' to 'arduino::HardwareSerial*' [-fpermissive]
 LoRa_E22 e22ttl(4, 5, 3, 7, 6); // Arduino RX <-- e22 TX, Arduino TX --> e22 RX AUX M0 M1
                              ^
In file included from /Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/examples/Arduino_e22_05_SendFixedTransmissionStructure/Arduino_e22_05_SendFixedTransmissionStructure.ino:43:0:
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/LoRa_E22.h:268:3: note:   initializing argument 1 of 'LoRa_E22::LoRa_E22(arduino::HardwareSerial*, byte, byte, byte, UART_BPS_RATE)'
   LoRa_E22(HardwareSerial* serial, byte auxPin, byte m0Pin, byte m1Pin, UART_BPS_RATE bpsRate = UART_BPS_RATE_9600);
   ^~~~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/examples/Arduino_e22_05_SendFixedTransmissionStructure/Arduino_e22_05_SendFixedTransmissionStructure.ino:56:30: error: invalid conversion from 'int' to 'UART_BPS_RATE' [-fpermissive]
 LoRa_E22 e22ttl(4, 5, 3, 7, 6); // Arduino RX <-- e22 TX, Arduino TX --> e22 RX AUX M0 M1
                              ^
In file included from /Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/examples/Arduino_e22_05_SendFixedTransmissionStructure/Arduino_e22_05_SendFixedTransmissionStructure.ino:43:0:
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/LoRa_E22.h:268:3: note:   initializing argument 5 of 'LoRa_E22::LoRa_E22(arduino::HardwareSerial*, byte, byte, byte, UART_BPS_RATE)'
   LoRa_E22(HardwareSerial* serial, byte auxPin, byte m0Pin, byte m1Pin, UART_BPS_RATE bpsRate = UART_BPS_RATE_9600);
   ^~~~~~~~

examples/Arduino_e22_06_WakeUpFromWOR

Result: FAIL

In file included from /Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/examples/Arduino_e22_06_WakeUpFromWOR/Arduino_e22_06_WakeUpFromWOR.ino:38:0:
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/LowPower_LowPowerLab/LowPower.h:161:6: error: #error "Please ensure chosen MCU is a SAMD21"
     #error "Please ensure chosen MCU is a SAMD21"
      ^~~~~
Multiple libraries were found for "LowPower.h"
  Used: /Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/LowPower_LowPowerLab
  Not used: /Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/Low-Power

examples/Arduino_e22_07_sendBroadcastMessage

Result: FAIL

/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/examples/Arduino_e22_07_sendBroadcastMessage/Arduino_e22_07_sendBroadcastMessage.ino:53:30: error: invalid conversion from 'int' to 'arduino::HardwareSerial*' [-fpermissive]
 LoRa_E22 e22ttl(4, 5, 3, 7, 6); // Arduino RX <-- e22 TX, Arduino TX --> e22 RX AUX M0 M1
                              ^
In file included from /Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/examples/Arduino_e22_07_sendBroadcastMessage/Arduino_e22_07_sendBroadcastMessage.ino:40:0:
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/LoRa_E22.h:268:3: note:   initializing argument 1 of 'LoRa_E22::LoRa_E22(arduino::HardwareSerial*, byte, byte, byte, UART_BPS_RATE)'
   LoRa_E22(HardwareSerial* serial, byte auxPin, byte m0Pin, byte m1Pin, UART_BPS_RATE bpsRate = UART_BPS_RATE_9600);
   ^~~~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/examples/Arduino_e22_07_sendBroadcastMessage/Arduino_e22_07_sendBroadcastMessage.ino:53:30: error: invalid conversion from 'int' to 'UART_BPS_RATE' [-fpermissive]
 LoRa_E22 e22ttl(4, 5, 3, 7, 6); // Arduino RX <-- e22 TX, Arduino TX --> e22 RX AUX M0 M1
                              ^
In file included from /Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/examples/Arduino_e22_07_sendBroadcastMessage/Arduino_e22_07_sendBroadcastMessage.ino:40:0:
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/LoRa_E22.h:268:3: note:   initializing argument 5 of 'LoRa_E22::LoRa_E22(arduino::HardwareSerial*, byte, byte, byte, UART_BPS_RATE)'
   LoRa_E22(HardwareSerial* serial, byte auxPin, byte m0Pin, byte m1Pin, UART_BPS_RATE bpsRate = UART_BPS_RATE_9600);
   ^~~~~~~~

examples/Arduino_e22_08_receiveMessage

Result: FAIL

/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/examples/Arduino_e22_08_receiveMessage/Arduino_e22_08_receiveMessage.ino:51:30: error: invalid conversion from 'int' to 'arduino::HardwareSerial*' [-fpermissive]
 LoRa_E22 e22ttl(4, 5, 3, 7, 6); // Arduino RX <-- e22 TX, Arduino TX --> e22 RX AUX M0 M1
                              ^
In file included from /Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/examples/Arduino_e22_08_receiveMessage/Arduino_e22_08_receiveMessage.ino:38:0:
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/LoRa_E22.h:268:3: note:   initializing argument 1 of 'LoRa_E22::LoRa_E22(arduino::HardwareSerial*, byte, byte, byte, UART_BPS_RATE)'
   LoRa_E22(HardwareSerial* serial, byte auxPin, byte m0Pin, byte m1Pin, UART_BPS_RATE bpsRate = UART_BPS_RATE_9600);
   ^~~~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/examples/Arduino_e22_08_receiveMessage/Arduino_e22_08_receiveMessage.ino:51:30: error: invalid conversion from 'int' to 'UART_BPS_RATE' [-fpermissive]
 LoRa_E22 e22ttl(4, 5, 3, 7, 6); // Arduino RX <-- e22 TX, Arduino TX --> e22 RX AUX M0 M1
                              ^
In file included from /Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/examples/Arduino_e22_08_receiveMessage/Arduino_e22_08_receiveMessage.ino:38:0:
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/LoRa_E22.h:268:3: note:   initializing argument 5 of 'LoRa_E22::LoRa_E22(arduino::HardwareSerial*, byte, byte, byte, UART_BPS_RATE)'
   LoRa_E22(HardwareSerial* serial, byte auxPin, byte m0Pin, byte m1Pin, UART_BPS_RATE bpsRate = UART_BPS_RATE_9600);
   ^~~~~~~~

examples/Arduino_e22_SendTransparent

Result: FAIL

/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/examples/Arduino_e22_SendTransparent/Arduino_e22_SendTransparent.ino:41:30: error: invalid conversion from 'int' to 'arduino::HardwareSerial*' [-fpermissive]
 LoRa_E22 e22ttl(4, 5, 3, 7, 6); // Arduino RX <-- e22 TX, Arduino TX --> e22 RX AUX M0 M1
                              ^
In file included from /Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/examples/Arduino_e22_SendTransparent/Arduino_e22_SendTransparent.ino:28:0:
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/LoRa_E22.h:268:3: note:   initializing argument 1 of 'LoRa_E22::LoRa_E22(arduino::HardwareSerial*, byte, byte, byte, UART_BPS_RATE)'
   LoRa_E22(HardwareSerial* serial, byte auxPin, byte m0Pin, byte m1Pin, UART_BPS_RATE bpsRate = UART_BPS_RATE_9600);
   ^~~~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/examples/Arduino_e22_SendTransparent/Arduino_e22_SendTransparent.ino:41:30: error: invalid conversion from 'int' to 'UART_BPS_RATE' [-fpermissive]
 LoRa_E22 e22ttl(4, 5, 3, 7, 6); // Arduino RX <-- e22 TX, Arduino TX --> e22 RX AUX M0 M1
                              ^
In file included from /Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/examples/Arduino_e22_SendTransparent/Arduino_e22_SendTransparent.ino:28:0:
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/LoRa_E22.h:268:3: note:   initializing argument 5 of 'LoRa_E22::LoRa_E22(arduino::HardwareSerial*, byte, byte, byte, UART_BPS_RATE)'
   LoRa_E22(HardwareSerial* serial, byte auxPin, byte m0Pin, byte m1Pin, UART_BPS_RATE bpsRate = UART_BPS_RATE_9600);
   ^~~~~~~~

examples/Arduino_e22_getConfiguration

Result: FAIL

/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/examples/Arduino_e22_getConfiguration/Arduino_e22_getConfiguration.ino:31:30: error: invalid conversion from 'int' to 'arduino::HardwareSerial*' [-fpermissive]
 LoRa_E22 e22ttl(4, 5, 3, 7, 6); // Arduino RX <-- e22 TX, Arduino TX --> e22 RX AUX M0 M1
                              ^
In file included from /Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/examples/Arduino_e22_getConfiguration/Arduino_e22_getConfiguration.ino:18:0:
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/LoRa_E22.h:268:3: note:   initializing argument 1 of 'LoRa_E22::LoRa_E22(arduino::HardwareSerial*, byte, byte, byte, UART_BPS_RATE)'
   LoRa_E22(HardwareSerial* serial, byte auxPin, byte m0Pin, byte m1Pin, UART_BPS_RATE bpsRate = UART_BPS_RATE_9600);
   ^~~~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/examples/Arduino_e22_getConfiguration/Arduino_e22_getConfiguration.ino:31:30: error: invalid conversion from 'int' to 'UART_BPS_RATE' [-fpermissive]
 LoRa_E22 e22ttl(4, 5, 3, 7, 6); // Arduino RX <-- e22 TX, Arduino TX --> e22 RX AUX M0 M1
                              ^
In file included from /Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/examples/Arduino_e22_getConfiguration/Arduino_e22_getConfiguration.ino:18:0:
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/LoRa_E22.h:268:3: note:   initializing argument 5 of 'LoRa_E22::LoRa_E22(arduino::HardwareSerial*, byte, byte, byte, UART_BPS_RATE)'
   LoRa_E22(HardwareSerial* serial, byte auxPin, byte m0Pin, byte m1Pin, UART_BPS_RATE bpsRate = UART_BPS_RATE_9600);
   ^~~~~~~~

examples/Arduino_e22_setConfiguration

Result: FAIL

/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/examples/Arduino_e22_setConfiguration/Arduino_e22_setConfiguration.ino:38:30: error: invalid conversion from 'int' to 'arduino::HardwareSerial*' [-fpermissive]
 LoRa_E22 e22ttl(4, 5, 3, 7, 6); // Arduino RX <-- e22 TX, Arduino TX --> e22 RX AUX M0 M1
                              ^
In file included from /Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/examples/Arduino_e22_setConfiguration/Arduino_e22_setConfiguration.ino:18:0:
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/LoRa_E22.h:268:3: note:   initializing argument 1 of 'LoRa_E22::LoRa_E22(arduino::HardwareSerial*, byte, byte, byte, UART_BPS_RATE)'
   LoRa_E22(HardwareSerial* serial, byte auxPin, byte m0Pin, byte m1Pin, UART_BPS_RATE bpsRate = UART_BPS_RATE_9600);
   ^~~~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/examples/Arduino_e22_setConfiguration/Arduino_e22_setConfiguration.ino:38:30: error: invalid conversion from 'int' to 'UART_BPS_RATE' [-fpermissive]
 LoRa_E22 e22ttl(4, 5, 3, 7, 6); // Arduino RX <-- e22 TX, Arduino TX --> e22 RX AUX M0 M1
                              ^
In file included from /Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/examples/Arduino_e22_setConfiguration/Arduino_e22_setConfiguration.ino:18:0:
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/LoRa_E22.h:268:3: note:   initializing argument 5 of 'LoRa_E22::LoRa_E22(arduino::HardwareSerial*, byte, byte, byte, UART_BPS_RATE)'
   LoRa_E22(HardwareSerial* serial, byte auxPin, byte m0Pin, byte m1Pin, UART_BPS_RATE bpsRate = UART_BPS_RATE_9600);
   ^~~~~~~~

examples/esp32_06_SendFixedTransmissionWOR

Result: FAIL

/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/examples/esp32_06_SendFixedTransmissionWOR/esp32_06_SendFixedTransmissionWOR.ino: In function 'void loop()':
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/examples/esp32_06_SendFixedTransmissionWOR/esp32_06_SendFixedTransmissionWOR.ino:115:27: error: 'e220ttl' was not declared in this scope
   ResponseStatus rsSend = e220ttl.sendFixedMessage(0, DESTINATION_ADDL, 23, "We have received the message!");
                           ^~~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/examples/esp32_06_SendFixedTransmissionWOR/esp32_06_SendFixedTransmissionWOR.ino:115:27: note: suggested alternative: 'e22ttl'
   ResponseStatus rsSend = e220ttl.sendFixedMessage(0, DESTINATION_ADDL, 23, "We have received the message!");
                           ^~~~~~~
                           e22ttl

examples/esp32_e22_03_SendTransparentStructure

Result: PASS

Sketch uses 14632 bytes (5%) of program storage space. Maximum is 262144 bytes.
Global variables use 3040 bytes (9%) of dynamic memory, leaving 29728 bytes for local variables. Maximum is 32768 bytes.

examples/esp32_e22_04_SendFixedTransmission

Result: PASS

Sketch uses 18364 bytes (7%) of program storage space. Maximum is 262144 bytes.
Global variables use 3024 bytes (9%) of dynamic memory, leaving 29744 bytes for local variables. Maximum is 32768 bytes.

examples/esp32_e22_05_SendFixedTransmissionStructure

Result: PASS

Sketch uses 26668 bytes (10%) of program storage space. Maximum is 262144 bytes.
Global variables use 3044 bytes (9%) of dynamic memory, leaving 29724 bytes for local variables. Maximum is 32768 bytes.

examples/esp32_e22_05_sendFixedTransmissionStructurePartial

Result: PASS

Sketch uses 23152 bytes (8%) of program storage space. Maximum is 262144 bytes.
Global variables use 3024 bytes (9%) of dynamic memory, leaving 29744 bytes for local variables. Maximum is 32768 bytes.

examples/esp32_e22_SendTransparent

Result: FAIL

/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/examples/esp32_e22_SendTransparent/esp32_e22_SendTransparent.ino:64:16: error: redefinition of 'LoRa_E22 e22ttl'
 LoRa_E22 e22ttl(&Serial2, 18, 21, 19); //  RX AUX M0 M1
                ^
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/examples/esp32_e22_SendTransparent/esp32_e22_SendTransparent.ino:58:10: note: 'LoRa_E22 e22ttl' previously declared here
 LoRa_E22 e22ttl(&Serial2, 18, 21, 19); //  RX AUX M0 M1
          ^~~~~~

examples/esp32_e22_getConfiguration

Result: PASS

Sketch uses 18132 bytes (6%) of program storage space. Maximum is 262144 bytes.
Global variables use 3024 bytes (9%) of dynamic memory, leaving 29744 bytes for local variables. Maximum is 32768 bytes.

examples/esp32_e22_sendBroadcastMessage

Result: PASS

Sketch uses 14820 bytes (5%) of program storage space. Maximum is 262144 bytes.
Global variables use 3024 bytes (9%) of dynamic memory, leaving 29744 bytes for local variables. Maximum is 32768 bytes.

examples/esp32_e22_setConfiguration

Result: PASS

Sketch uses 17844 bytes (6%) of program storage space. Maximum is 262144 bytes.
Global variables use 3024 bytes (9%) of dynamic memory, leaving 29744 bytes for local variables. Maximum is 32768 bytes.

examples/esp8266_e22_02_SendTransparent

Result: FAIL

/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/examples/esp8266_e22_02_SendTransparent/esp8266_e22_02_SendTransparent.ino:31:17: error: 'D3' was not declared in this scope
 LoRa_E22 e22ttl(D3, D4, D5, D7, D6); // Arduino RX <-- e22 TX, Arduino TX --> e22 RX AUX M0 M1
                 ^~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/examples/esp8266_e22_02_SendTransparent/esp8266_e22_02_SendTransparent.ino:31:17: note: suggested alternative: 'A3'
 LoRa_E22 e22ttl(D3, D4, D5, D7, D6); // Arduino RX <-- e22 TX, Arduino TX --> e22 RX AUX M0 M1
                 ^~
                 A3
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/examples/esp8266_e22_02_SendTransparent/esp8266_e22_02_SendTransparent.ino:31:21: error: 'D4' was not declared in this scope
 LoRa_E22 e22ttl(D3, D4, D5, D7, D6); // Arduino RX <-- e22 TX, Arduino TX --> e22 RX AUX M0 M1
                     ^~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/examples/esp8266_e22_02_SendTransparent/esp8266_e22_02_SendTransparent.ino:31:21: note: suggested alternative: 'A4'
 LoRa_E22 e22ttl(D3, D4, D5, D7, D6); // Arduino RX <-- e22 TX, Arduino TX --> e22 RX AUX M0 M1
                     ^~
                     A4
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/examples/esp8266_e22_02_SendTransparent/esp8266_e22_02_SendTransparent.ino:31:25: error: 'D5' was not declared in this scope
 LoRa_E22 e22ttl(D3, D4, D5, D7, D6); // Arduino RX <-- e22 TX, Arduino TX --> e22 RX AUX M0 M1
                         ^~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/examples/esp8266_e22_02_SendTransparent/esp8266_e22_02_SendTransparent.ino:31:25: note: suggested alternative: 'A5'
 LoRa_E22 e22ttl(D3, D4, D5, D7, D6); // Arduino RX <-- e22 TX, Arduino TX --> e22 RX AUX M0 M1
                         ^~
                         A5
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/examples/esp8266_e22_02_SendTransparent/esp8266_e22_02_SendTransparent.ino:31:29: error: 'D7' was not declared in this scope
 LoRa_E22 e22ttl(D3, D4, D5, D7, D6); // Arduino RX <-- e22 TX, Arduino TX --> e22 RX AUX M0 M1
                             ^~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/examples/esp8266_e22_02_SendTransparent/esp8266_e22_02_SendTransparent.ino:31:33: error: 'D6' was not declared in this scope
 LoRa_E22 e22ttl(D3, D4, D5, D7, D6); // Arduino RX <-- e22 TX, Arduino TX --> e22 RX AUX M0 M1
                                 ^~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/examples/esp8266_e22_02_SendTransparent/esp8266_e22_02_SendTransparent.ino:31:33: note: suggested alternative: 'A6'
 LoRa_E22 e22ttl(D3, D4, D5, D7, D6); // Arduino RX <-- e22 TX, Arduino TX --> e22 RX AUX M0 M1
                                 ^~
                                 A6

examples/esp8266_e22_03_SendTransparentStructure

Result: FAIL

/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/examples/esp8266_e22_03_SendTransparentStructure/esp8266_e22_03_SendTransparentStructure.ino:34:17: error: 'D3' was not declared in this scope
 LoRa_E22 e22ttl(D3, D4, D5, D7, D6); // Arduino RX <-- e22 TX, Arduino TX --> e22 RX AUX M0 M1
                 ^~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/examples/esp8266_e22_03_SendTransparentStructure/esp8266_e22_03_SendTransparentStructure.ino:34:17: note: suggested alternative: 'A3'
 LoRa_E22 e22ttl(D3, D4, D5, D7, D6); // Arduino RX <-- e22 TX, Arduino TX --> e22 RX AUX M0 M1
                 ^~
                 A3
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/examples/esp8266_e22_03_SendTransparentStructure/esp8266_e22_03_SendTransparentStructure.ino:34:21: error: 'D4' was not declared in this scope
 LoRa_E22 e22ttl(D3, D4, D5, D7, D6); // Arduino RX <-- e22 TX, Arduino TX --> e22 RX AUX M0 M1
                     ^~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/examples/esp8266_e22_03_SendTransparentStructure/esp8266_e22_03_SendTransparentStructure.ino:34:21: note: suggested alternative: 'A4'
 LoRa_E22 e22ttl(D3, D4, D5, D7, D6); // Arduino RX <-- e22 TX, Arduino TX --> e22 RX AUX M0 M1
                     ^~
                     A4
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/examples/esp8266_e22_03_SendTransparentStructure/esp8266_e22_03_SendTransparentStructure.ino:34:25: error: 'D5' was not declared in this scope
 LoRa_E22 e22ttl(D3, D4, D5, D7, D6); // Arduino RX <-- e22 TX, Arduino TX --> e22 RX AUX M0 M1
                         ^~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/examples/esp8266_e22_03_SendTransparentStructure/esp8266_e22_03_SendTransparentStructure.ino:34:25: note: suggested alternative: 'A5'
 LoRa_E22 e22ttl(D3, D4, D5, D7, D6); // Arduino RX <-- e22 TX, Arduino TX --> e22 RX AUX M0 M1
                         ^~
                         A5
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/examples/esp8266_e22_03_SendTransparentStructure/esp8266_e22_03_SendTransparentStructure.ino:34:29: error: 'D7' was not declared in this scope
 LoRa_E22 e22ttl(D3, D4, D5, D7, D6); // Arduino RX <-- e22 TX, Arduino TX --> e22 RX AUX M0 M1
                             ^~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/examples/esp8266_e22_03_SendTransparentStructure/esp8266_e22_03_SendTransparentStructure.ino:34:33: error: 'D6' was not declared in this scope
 LoRa_E22 e22ttl(D3, D4, D5, D7, D6); // Arduino RX <-- e22 TX, Arduino TX --> e22 RX AUX M0 M1
                                 ^~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/examples/esp8266_e22_03_SendTransparentStructure/esp8266_e22_03_SendTransparentStructure.ino:34:33: note: suggested alternative: 'A6'
 LoRa_E22 e22ttl(D3, D4, D5, D7, D6); // Arduino RX <-- e22 TX, Arduino TX --> e22 RX AUX M0 M1
                                 ^~
                                 A6

examples/esp8266_e22_04_SendFixedTransmission

Result: FAIL

/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/examples/esp8266_e22_04_SendFixedTransmission/esp8266_e22_04_SendFixedTransmission.ino:43:17: error: 'D3' was not declared in this scope
 LoRa_E22 e22ttl(D3, D4, D5, D7, D6); // Arduino RX <-- e22 TX, Arduino TX --> e22 RX AUX M0 M1
                 ^~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/examples/esp8266_e22_04_SendFixedTransmission/esp8266_e22_04_SendFixedTransmission.ino:43:17: note: suggested alternative: 'A3'
 LoRa_E22 e22ttl(D3, D4, D5, D7, D6); // Arduino RX <-- e22 TX, Arduino TX --> e22 RX AUX M0 M1
                 ^~
                 A3
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/examples/esp8266_e22_04_SendFixedTransmission/esp8266_e22_04_SendFixedTransmission.ino:43:21: error: 'D4' was not declared in this scope
 LoRa_E22 e22ttl(D3, D4, D5, D7, D6); // Arduino RX <-- e22 TX, Arduino TX --> e22 RX AUX M0 M1
                     ^~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/examples/esp8266_e22_04_SendFixedTransmission/esp8266_e22_04_SendFixedTransmission.ino:43:21: note: suggested alternative: 'A4'
 LoRa_E22 e22ttl(D3, D4, D5, D7, D6); // Arduino RX <-- e22 TX, Arduino TX --> e22 RX AUX M0 M1
                     ^~
                     A4
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/examples/esp8266_e22_04_SendFixedTransmission/esp8266_e22_04_SendFixedTransmission.ino:43:25: error: 'D5' was not declared in this scope
 LoRa_E22 e22ttl(D3, D4, D5, D7, D6); // Arduino RX <-- e22 TX, Arduino TX --> e22 RX AUX M0 M1
                         ^~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/examples/esp8266_e22_04_SendFixedTransmission/esp8266_e22_04_SendFixedTransmission.ino:43:25: note: suggested alternative: 'A5'
 LoRa_E22 e22ttl(D3, D4, D5, D7, D6); // Arduino RX <-- e22 TX, Arduino TX --> e22 RX AUX M0 M1
                         ^~
                         A5
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/examples/esp8266_e22_04_SendFixedTransmission/esp8266_e22_04_SendFixedTransmission.ino:43:29: error: 'D7' was not declared in this scope
 LoRa_E22 e22ttl(D3, D4, D5, D7, D6); // Arduino RX <-- e22 TX, Arduino TX --> e22 RX AUX M0 M1
                             ^~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/examples/esp8266_e22_04_SendFixedTransmission/esp8266_e22_04_SendFixedTransmission.ino:43:33: error: 'D6' was not declared in this scope
 LoRa_E22 e22ttl(D3, D4, D5, D7, D6); // Arduino RX <-- e22 TX, Arduino TX --> e22 RX AUX M0 M1
                                 ^~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/examples/esp8266_e22_04_SendFixedTransmission/esp8266_e22_04_SendFixedTransmission.ino:43:33: note: suggested alternative: 'A6'
 LoRa_E22 e22ttl(D3, D4, D5, D7, D6); // Arduino RX <-- e22 TX, Arduino TX --> e22 RX AUX M0 M1
                                 ^~
                                 A6

examples/esp8266_e22_05_SendFixedTransmissionStructure

Result: FAIL

/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/examples/esp8266_e22_05_SendFixedTransmissionStructure/esp8266_e22_05_SendFixedTransmissionStructure.ino:43:17: error: 'D3' was not declared in this scope
 LoRa_E22 e22ttl(D3, D4, D5, D7, D6); // Arduino RX <-- e22 TX, Arduino TX --> e22 RX AUX M0 M1
                 ^~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/examples/esp8266_e22_05_SendFixedTransmissionStructure/esp8266_e22_05_SendFixedTransmissionStructure.ino:43:17: note: suggested alternative: 'A3'
 LoRa_E22 e22ttl(D3, D4, D5, D7, D6); // Arduino RX <-- e22 TX, Arduino TX --> e22 RX AUX M0 M1
                 ^~
                 A3
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/examples/esp8266_e22_05_SendFixedTransmissionStructure/esp8266_e22_05_SendFixedTransmissionStructure.ino:43:21: error: 'D4' was not declared in this scope
 LoRa_E22 e22ttl(D3, D4, D5, D7, D6); // Arduino RX <-- e22 TX, Arduino TX --> e22 RX AUX M0 M1
                     ^~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/examples/esp8266_e22_05_SendFixedTransmissionStructure/esp8266_e22_05_SendFixedTransmissionStructure.ino:43:21: note: suggested alternative: 'A4'
 LoRa_E22 e22ttl(D3, D4, D5, D7, D6); // Arduino RX <-- e22 TX, Arduino TX --> e22 RX AUX M0 M1
                     ^~
                     A4
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/examples/esp8266_e22_05_SendFixedTransmissionStructure/esp8266_e22_05_SendFixedTransmissionStructure.ino:43:25: error: 'D5' was not declared in this scope
 LoRa_E22 e22ttl(D3, D4, D5, D7, D6); // Arduino RX <-- e22 TX, Arduino TX --> e22 RX AUX M0 M1
                         ^~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/examples/esp8266_e22_05_SendFixedTransmissionStructure/esp8266_e22_05_SendFixedTransmissionStructure.ino:43:25: note: suggested alternative: 'A5'
 LoRa_E22 e22ttl(D3, D4, D5, D7, D6); // Arduino RX <-- e22 TX, Arduino TX --> e22 RX AUX M0 M1
                         ^~
                         A5
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/examples/esp8266_e22_05_SendFixedTransmissionStructure/esp8266_e22_05_SendFixedTransmissionStructure.ino:43:29: error: 'D7' was not declared in this scope
 LoRa_E22 e22ttl(D3, D4, D5, D7, D6); // Arduino RX <-- e22 TX, Arduino TX --> e22 RX AUX M0 M1
                             ^~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/examples/esp8266_e22_05_SendFixedTransmissionStructure/esp8266_e22_05_SendFixedTransmissionStructure.ino:43:33: error: 'D6' was not declared in this scope
 LoRa_E22 e22ttl(D3, D4, D5, D7, D6); // Arduino RX <-- e22 TX, Arduino TX --> e22 RX AUX M0 M1
                                 ^~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/examples/esp8266_e22_05_SendFixedTransmissionStructure/esp8266_e22_05_SendFixedTransmissionStructure.ino:43:33: note: suggested alternative: 'A6'
 LoRa_E22 e22ttl(D3, D4, D5, D7, D6); // Arduino RX <-- e22 TX, Arduino TX --> e22 RX AUX M0 M1
                                 ^~
                                 A6

examples/esp8266_e22_06_WakeUpFromWOR

Result: FAIL

/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/examples/esp8266_e22_06_WakeUpFromWOR/esp8266_e22_06_WakeUpFromWOR.ino:38:10: fatal error: ESP8266WiFi.h: No such file or directory
 #include <ESP8266WiFi.h>
          ^~~~~~~~~~~~~~~
compilation terminated.

examples/esp8266_e22_07_sendBroadcastMessage

Result: FAIL

/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/examples/esp8266_e22_07_sendBroadcastMessage/esp8266_e22_07_sendBroadcastMessage.ino:44:17: error: 'D3' was not declared in this scope
 LoRa_E22 e22ttl(D3, D4, D5, D7, D6); // Arduino RX <-- e22 TX, Arduino TX --> e22 RX AUX M0 M1
                 ^~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/examples/esp8266_e22_07_sendBroadcastMessage/esp8266_e22_07_sendBroadcastMessage.ino:44:17: note: suggested alternative: 'A3'
 LoRa_E22 e22ttl(D3, D4, D5, D7, D6); // Arduino RX <-- e22 TX, Arduino TX --> e22 RX AUX M0 M1
                 ^~
                 A3
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/examples/esp8266_e22_07_sendBroadcastMessage/esp8266_e22_07_sendBroadcastMessage.ino:44:21: error: 'D4' was not declared in this scope
 LoRa_E22 e22ttl(D3, D4, D5, D7, D6); // Arduino RX <-- e22 TX, Arduino TX --> e22 RX AUX M0 M1
                     ^~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/examples/esp8266_e22_07_sendBroadcastMessage/esp8266_e22_07_sendBroadcastMessage.ino:44:21: note: suggested alternative: 'A4'
 LoRa_E22 e22ttl(D3, D4, D5, D7, D6); // Arduino RX <-- e22 TX, Arduino TX --> e22 RX AUX M0 M1
                     ^~
                     A4
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/examples/esp8266_e22_07_sendBroadcastMessage/esp8266_e22_07_sendBroadcastMessage.ino:44:25: error: 'D5' was not declared in this scope
 LoRa_E22 e22ttl(D3, D4, D5, D7, D6); // Arduino RX <-- e22 TX, Arduino TX --> e22 RX AUX M0 M1
                         ^~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/examples/esp8266_e22_07_sendBroadcastMessage/esp8266_e22_07_sendBroadcastMessage.ino:44:25: note: suggested alternative: 'A5'
 LoRa_E22 e22ttl(D3, D4, D5, D7, D6); // Arduino RX <-- e22 TX, Arduino TX --> e22 RX AUX M0 M1
                         ^~
                         A5
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/examples/esp8266_e22_07_sendBroadcastMessage/esp8266_e22_07_sendBroadcastMessage.ino:44:29: error: 'D7' was not declared in this scope
 LoRa_E22 e22ttl(D3, D4, D5, D7, D6); // Arduino RX <-- e22 TX, Arduino TX --> e22 RX AUX M0 M1
                             ^~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/examples/esp8266_e22_07_sendBroadcastMessage/esp8266_e22_07_sendBroadcastMessage.ino:44:33: error: 'D6' was not declared in this scope
 LoRa_E22 e22ttl(D3, D4, D5, D7, D6); // Arduino RX <-- e22 TX, Arduino TX --> e22 RX AUX M0 M1
                                 ^~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/examples/esp8266_e22_07_sendBroadcastMessage/esp8266_e22_07_sendBroadcastMessage.ino:44:33: note: suggested alternative: 'A6'
 LoRa_E22 e22ttl(D3, D4, D5, D7, D6); // Arduino RX <-- e22 TX, Arduino TX --> e22 RX AUX M0 M1
                                 ^~
                                 A6

examples/esp8266_e22_getConfiguration

Result: FAIL

/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/examples/esp8266_e22_getConfiguration/esp8266_e22_getConfiguration.ino:22:17: error: 'D3' was not declared in this scope
 LoRa_E22 e22ttl(D3, D4, D5, D7, D6); // Arduino RX <-- e22 TX, Arduino TX --> e22 RX AUX M0 M1
                 ^~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/examples/esp8266_e22_getConfiguration/esp8266_e22_getConfiguration.ino:22:17: note: suggested alternative: 'A3'
 LoRa_E22 e22ttl(D3, D4, D5, D7, D6); // Arduino RX <-- e22 TX, Arduino TX --> e22 RX AUX M0 M1
                 ^~
                 A3
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/examples/esp8266_e22_getConfiguration/esp8266_e22_getConfiguration.ino:22:21: error: 'D4' was not declared in this scope
 LoRa_E22 e22ttl(D3, D4, D5, D7, D6); // Arduino RX <-- e22 TX, Arduino TX --> e22 RX AUX M0 M1
                     ^~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/examples/esp8266_e22_getConfiguration/esp8266_e22_getConfiguration.ino:22:21: note: suggested alternative: 'A4'
 LoRa_E22 e22ttl(D3, D4, D5, D7, D6); // Arduino RX <-- e22 TX, Arduino TX --> e22 RX AUX M0 M1
                     ^~
                     A4
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/examples/esp8266_e22_getConfiguration/esp8266_e22_getConfiguration.ino:22:25: error: 'D5' was not declared in this scope
 LoRa_E22 e22ttl(D3, D4, D5, D7, D6); // Arduino RX <-- e22 TX, Arduino TX --> e22 RX AUX M0 M1
                         ^~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/examples/esp8266_e22_getConfiguration/esp8266_e22_getConfiguration.ino:22:25: note: suggested alternative: 'A5'
 LoRa_E22 e22ttl(D3, D4, D5, D7, D6); // Arduino RX <-- e22 TX, Arduino TX --> e22 RX AUX M0 M1
                         ^~
                         A5
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/examples/esp8266_e22_getConfiguration/esp8266_e22_getConfiguration.ino:22:29: error: 'D7' was not declared in this scope
 LoRa_E22 e22ttl(D3, D4, D5, D7, D6); // Arduino RX <-- e22 TX, Arduino TX --> e22 RX AUX M0 M1
                             ^~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/examples/esp8266_e22_getConfiguration/esp8266_e22_getConfiguration.ino:22:33: error: 'D6' was not declared in this scope
 LoRa_E22 e22ttl(D3, D4, D5, D7, D6); // Arduino RX <-- e22 TX, Arduino TX --> e22 RX AUX M0 M1
                                 ^~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/examples/esp8266_e22_getConfiguration/esp8266_e22_getConfiguration.ino:22:33: note: suggested alternative: 'A6'
 LoRa_E22 e22ttl(D3, D4, D5, D7, D6); // Arduino RX <-- e22 TX, Arduino TX --> e22 RX AUX M0 M1
                                 ^~
                                 A6

examples/esp8266_e22_setConfiguration

Result: FAIL

/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/examples/esp8266_e22_setConfiguration/esp8266_e22_setConfiguration.ino:22:17: error: 'D3' was not declared in this scope
 LoRa_E22 e22ttl(D3, D4, D5, D7, D6); // Arduino RX <-- e22 TX, Arduino TX --> e22 RX AUX M0 M1
                 ^~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/examples/esp8266_e22_setConfiguration/esp8266_e22_setConfiguration.ino:22:17: note: suggested alternative: 'A3'
 LoRa_E22 e22ttl(D3, D4, D5, D7, D6); // Arduino RX <-- e22 TX, Arduino TX --> e22 RX AUX M0 M1
                 ^~
                 A3
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/examples/esp8266_e22_setConfiguration/esp8266_e22_setConfiguration.ino:22:21: error: 'D4' was not declared in this scope
 LoRa_E22 e22ttl(D3, D4, D5, D7, D6); // Arduino RX <-- e22 TX, Arduino TX --> e22 RX AUX M0 M1
                     ^~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/examples/esp8266_e22_setConfiguration/esp8266_e22_setConfiguration.ino:22:21: note: suggested alternative: 'A4'
 LoRa_E22 e22ttl(D3, D4, D5, D7, D6); // Arduino RX <-- e22 TX, Arduino TX --> e22 RX AUX M0 M1
                     ^~
                     A4
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/examples/esp8266_e22_setConfiguration/esp8266_e22_setConfiguration.ino:22:25: error: 'D5' was not declared in this scope
 LoRa_E22 e22ttl(D3, D4, D5, D7, D6); // Arduino RX <-- e22 TX, Arduino TX --> e22 RX AUX M0 M1
                         ^~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/examples/esp8266_e22_setConfiguration/esp8266_e22_setConfiguration.ino:22:25: note: suggested alternative: 'A5'
 LoRa_E22 e22ttl(D3, D4, D5, D7, D6); // Arduino RX <-- e22 TX, Arduino TX --> e22 RX AUX M0 M1
                         ^~
                         A5
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/examples/esp8266_e22_setConfiguration/esp8266_e22_setConfiguration.ino:22:29: error: 'D7' was not declared in this scope
 LoRa_E22 e22ttl(D3, D4, D5, D7, D6); // Arduino RX <-- e22 TX, Arduino TX --> e22 RX AUX M0 M1
                             ^~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/examples/esp8266_e22_setConfiguration/esp8266_e22_setConfiguration.ino:22:33: error: 'D6' was not declared in this scope
 LoRa_E22 e22ttl(D3, D4, D5, D7, D6); // Arduino RX <-- e22 TX, Arduino TX --> e22 RX AUX M0 M1
                                 ^~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/examples/esp8266_e22_setConfiguration/esp8266_e22_setConfiguration.ino:22:33: note: suggested alternative: 'A6'
 LoRa_E22 e22ttl(D3, D4, D5, D7, D6); // Arduino RX <-- e22 TX, Arduino TX --> e22 RX AUX M0 M1
                                 ^~
                                 A6

esp32:esp32:d1_mini32 @ 1.0.6

Inclusion

Result: PASS

Sketch uses 201126 bytes (15%) of program storage space. Maximum is 1310720 bytes.
Global variables use 13192 bytes (4%) of dynamic memory, leaving 314488 bytes for local variables. Maximum is 327680 bytes.

examples/Arduino_MKR_Nano_33_e22_01_setConfiguration

Result: PASS

Sketch uses 212298 bytes (16%) of program storage space. Maximum is 1310720 bytes.
Global variables use 13456 bytes (4%) of dynamic memory, leaving 314224 bytes for local variables. Maximum is 327680 bytes.

examples/Arduino_MKR_Nano_33_e22_05_sendStructurePartial

Result: PASS

Sketch uses 209606 bytes (15%) of program storage space. Maximum is 1310720 bytes.
Global variables use 13456 bytes (4%) of dynamic memory, leaving 314224 bytes for local variables. Maximum is 327680 bytes.

examples/Arduino_MKR_Nano_33_e22_sendFixedTransmissionWOR

Result: PASS

Sketch uses 208582 bytes (15%) of program storage space. Maximum is 1310720 bytes.
Global variables use 13456 bytes (4%) of dynamic memory, leaving 314224 bytes for local variables. Maximum is 327680 bytes.

examples/Arduino_e22_04_SendFixedTransmission

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/examples/Arduino_e22_04_SendFixedTransmission/Arduino_e22_04_SendFixedTransmission.ino:53:30: error: no matching function for call to 'LoRa_E22(int, int, int, int, int)'
 LoRa_E22 e22ttl(4, 5, 3, 7, 6); // Arduino RX <-- e22 TX, Arduino TX --> e22 RX AUX M0 M1
                              ^
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/examples/Arduino_e22_04_SendFixedTransmission/Arduino_e22_04_SendFixedTransmission.ino:40:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/LoRa_E22.h:272:3: note: candidate: LoRa_E22::LoRa_E22(byte, byte, HardwareSerial*, byte, UART_BPS_RATE, uint32_t) <near match>
   LoRa_E22(byte txE32pin, byte rxE32pin, HardwareSerial* serial, byte auxPin, UART_BPS_RATE bpsRate, uint32_t serialConfig = SERIAL_8N1);
   ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/LoRa_E22.h:272:3: note:   conversion of argument 5 would be ill-formed:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/examples/Arduino_e22_04_SendFixedTransmission/Arduino_e22_04_SendFixedTransmission.ino:53:30: error: invalid conversion from 'int' to 'UART_BPS_RATE' [-fpermissive]
 LoRa_E22 e22ttl(4, 5, 3, 7, 6); // Arduino RX <-- e22 TX, Arduino TX --> e22 RX AUX M0 M1
                              ^
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/examples/Arduino_e22_04_SendFixedTransmission/Arduino_e22_04_SendFixedTransmission.ino:40:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/LoRa_E22.h:271:3: note: candidate: LoRa_E22::LoRa_E22(byte, byte, HardwareSerial*, UART_BPS_RATE, uint32_t) <near match>
   LoRa_E22(byte txE32pin, byte rxE32pin, HardwareSerial* serial, UART_BPS_RATE bpsRate, uint32_t serialConfig = SERIAL_8N1);
   ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/LoRa_E22.h:271:3: note:   conversion of argument 4 would be ill-formed:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/examples/Arduino_e22_04_SendFixedTransmission/Arduino_e22_04_SendFixedTransmission.ino:53:30: error: invalid conversion from 'int' to 'UART_BPS_RATE' [-fpermissive]
 LoRa_E22 e22ttl(4, 5, 3, 7, 6); // Arduino RX <-- e22 TX, Arduino TX --> e22 RX AUX M0 M1
                              ^
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/examples/Arduino_e22_04_SendFixedTransmission/Arduino_e22_04_SendFixedTransmission.ino:40:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/LoRa_E22.h:268:3: note: candidate: LoRa_E22::LoRa_E22(HardwareSerial*, byte, byte, byte, UART_BPS_RATE) <near match>
   LoRa_E22(HardwareSerial* serial, byte auxPin, byte m0Pin, byte m1Pin, UART_BPS_RATE bpsRate = UART_BPS_RATE_9600);
   ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/LoRa_E22.h:268:3: note:   conversion of argument 5 would be ill-formed:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/examples/Arduino_e22_04_SendFixedTransmission/Arduino_e22_04_SendFixedTransmission.ino:53:30: error: invalid conversion from 'int' to 'UART_BPS_RATE' [-fpermissive]
 LoRa_E22 e22ttl(4, 5, 3, 7, 6); // Arduino RX <-- e22 TX, Arduino TX --> e22 RX AUX M0 M1
                              ^

examples/Arduino_e22_05_SendFixedTransmissionStructure

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/examples/Arduino_e22_05_SendFixedTransmissionStructure/Arduino_e22_05_SendFixedTransmissionStructure.ino:56:30: error: no matching function for call to 'LoRa_E22(int, int, int, int, int)'
 LoRa_E22 e22ttl(4, 5, 3, 7, 6); // Arduino RX <-- e22 TX, Arduino TX --> e22 RX AUX M0 M1
                              ^
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/examples/Arduino_e22_05_SendFixedTransmissionStructure/Arduino_e22_05_SendFixedTransmissionStructure.ino:43:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/LoRa_E22.h:272:3: note: candidate: LoRa_E22::LoRa_E22(byte, byte, HardwareSerial*, byte, UART_BPS_RATE, uint32_t) <near match>
   LoRa_E22(byte txE32pin, byte rxE32pin, HardwareSerial* serial, byte auxPin, UART_BPS_RATE bpsRate, uint32_t serialConfig = SERIAL_8N1);
   ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/LoRa_E22.h:272:3: note:   conversion of argument 5 would be ill-formed:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/examples/Arduino_e22_05_SendFixedTransmissionStructure/Arduino_e22_05_SendFixedTransmissionStructure.ino:56:30: error: invalid conversion from 'int' to 'UART_BPS_RATE' [-fpermissive]
 LoRa_E22 e22ttl(4, 5, 3, 7, 6); // Arduino RX <-- e22 TX, Arduino TX --> e22 RX AUX M0 M1
                              ^
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/examples/Arduino_e22_05_SendFixedTransmissionStructure/Arduino_e22_05_SendFixedTransmissionStructure.ino:43:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/LoRa_E22.h:271:3: note: candidate: LoRa_E22::LoRa_E22(byte, byte, HardwareSerial*, UART_BPS_RATE, uint32_t) <near match>
   LoRa_E22(byte txE32pin, byte rxE32pin, HardwareSerial* serial, UART_BPS_RATE bpsRate, uint32_t serialConfig = SERIAL_8N1);
   ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/LoRa_E22.h:271:3: note:   conversion of argument 4 would be ill-formed:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/examples/Arduino_e22_05_SendFixedTransmissionStructure/Arduino_e22_05_SendFixedTransmissionStructure.ino:56:30: error: invalid conversion from 'int' to 'UART_BPS_RATE' [-fpermissive]
 LoRa_E22 e22ttl(4, 5, 3, 7, 6); // Arduino RX <-- e22 TX, Arduino TX --> e22 RX AUX M0 M1
                              ^
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/examples/Arduino_e22_05_SendFixedTransmissionStructure/Arduino_e22_05_SendFixedTransmissionStructure.ino:43:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/LoRa_E22.h:268:3: note: candidate: LoRa_E22::LoRa_E22(HardwareSerial*, byte, byte, byte, UART_BPS_RATE) <near match>
   LoRa_E22(HardwareSerial* serial, byte auxPin, byte m0Pin, byte m1Pin, UART_BPS_RATE bpsRate = UART_BPS_RATE_9600);
   ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/LoRa_E22.h:268:3: note:   conversion of argument 5 would be ill-formed:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/examples/Arduino_e22_05_SendFixedTransmissionStructure/Arduino_e22_05_SendFixedTransmissionStructure.ino:56:30: error: invalid conversion from 'int' to 'UART_BPS_RATE' [-fpermissive]
 LoRa_E22 e22ttl(4, 5, 3, 7, 6); // Arduino RX <-- e22 TX, Arduino TX --> e22 RX AUX M0 M1
                              ^

examples/Arduino_e22_06_WakeUpFromWOR

Result: FAIL

WARNING: library LowPower_LowPowerLab claims to run on avr, samd architecture(s) and may be incompatible with your current board which runs on esp32 architecture(s).
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/examples/Arduino_e22_06_WakeUpFromWOR/Arduino_e22_06_WakeUpFromWOR.ino:38:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/LowPower_LowPowerLab/LowPower.h:166:5: error: #error "Processor architecture is not supported."
    #error "Processor architecture is not supported."
     ^
Multiple libraries were found for "LowPower.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/LowPower_LowPowerLab
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Low-Power

examples/Arduino_e22_07_sendBroadcastMessage

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/examples/Arduino_e22_07_sendBroadcastMessage/Arduino_e22_07_sendBroadcastMessage.ino:53:30: error: no matching function for call to 'LoRa_E22(int, int, int, int, int)'
 LoRa_E22 e22ttl(4, 5, 3, 7, 6); // Arduino RX <-- e22 TX, Arduino TX --> e22 RX AUX M0 M1
                              ^
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/examples/Arduino_e22_07_sendBroadcastMessage/Arduino_e22_07_sendBroadcastMessage.ino:40:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/LoRa_E22.h:272:3: note: candidate: LoRa_E22::LoRa_E22(byte, byte, HardwareSerial*, byte, UART_BPS_RATE, uint32_t) <near match>
   LoRa_E22(byte txE32pin, byte rxE32pin, HardwareSerial* serial, byte auxPin, UART_BPS_RATE bpsRate, uint32_t serialConfig = SERIAL_8N1);
   ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/LoRa_E22.h:272:3: note:   conversion of argument 5 would be ill-formed:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/examples/Arduino_e22_07_sendBroadcastMessage/Arduino_e22_07_sendBroadcastMessage.ino:53:30: error: invalid conversion from 'int' to 'UART_BPS_RATE' [-fpermissive]
 LoRa_E22 e22ttl(4, 5, 3, 7, 6); // Arduino RX <-- e22 TX, Arduino TX --> e22 RX AUX M0 M1
                              ^
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/examples/Arduino_e22_07_sendBroadcastMessage/Arduino_e22_07_sendBroadcastMessage.ino:40:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/LoRa_E22.h:271:3: note: candidate: LoRa_E22::LoRa_E22(byte, byte, HardwareSerial*, UART_BPS_RATE, uint32_t) <near match>
   LoRa_E22(byte txE32pin, byte rxE32pin, HardwareSerial* serial, UART_BPS_RATE bpsRate, uint32_t serialConfig = SERIAL_8N1);
   ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/LoRa_E22.h:271:3: note:   conversion of argument 4 would be ill-formed:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/examples/Arduino_e22_07_sendBroadcastMessage/Arduino_e22_07_sendBroadcastMessage.ino:53:30: error: invalid conversion from 'int' to 'UART_BPS_RATE' [-fpermissive]
 LoRa_E22 e22ttl(4, 5, 3, 7, 6); // Arduino RX <-- e22 TX, Arduino TX --> e22 RX AUX M0 M1
                              ^
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/examples/Arduino_e22_07_sendBroadcastMessage/Arduino_e22_07_sendBroadcastMessage.ino:40:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/LoRa_E22.h:268:3: note: candidate: LoRa_E22::LoRa_E22(HardwareSerial*, byte, byte, byte, UART_BPS_RATE) <near match>
   LoRa_E22(HardwareSerial* serial, byte auxPin, byte m0Pin, byte m1Pin, UART_BPS_RATE bpsRate = UART_BPS_RATE_9600);
   ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/LoRa_E22.h:268:3: note:   conversion of argument 5 would be ill-formed:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/examples/Arduino_e22_07_sendBroadcastMessage/Arduino_e22_07_sendBroadcastMessage.ino:53:30: error: invalid conversion from 'int' to 'UART_BPS_RATE' [-fpermissive]
 LoRa_E22 e22ttl(4, 5, 3, 7, 6); // Arduino RX <-- e22 TX, Arduino TX --> e22 RX AUX M0 M1
                              ^

examples/Arduino_e22_08_receiveMessage

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/examples/Arduino_e22_08_receiveMessage/Arduino_e22_08_receiveMessage.ino:51:30: error: no matching function for call to 'LoRa_E22(int, int, int, int, int)'
 LoRa_E22 e22ttl(4, 5, 3, 7, 6); // Arduino RX <-- e22 TX, Arduino TX --> e22 RX AUX M0 M1
                              ^
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/examples/Arduino_e22_08_receiveMessage/Arduino_e22_08_receiveMessage.ino:38:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/LoRa_E22.h:272:3: note: candidate: LoRa_E22::LoRa_E22(byte, byte, HardwareSerial*, byte, UART_BPS_RATE, uint32_t) <near match>
   LoRa_E22(byte txE32pin, byte rxE32pin, HardwareSerial* serial, byte auxPin, UART_BPS_RATE bpsRate, uint32_t serialConfig = SERIAL_8N1);
   ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/LoRa_E22.h:272:3: note:   conversion of argument 5 would be ill-formed:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/examples/Arduino_e22_08_receiveMessage/Arduino_e22_08_receiveMessage.ino:51:30: error: invalid conversion from 'int' to 'UART_BPS_RATE' [-fpermissive]
 LoRa_E22 e22ttl(4, 5, 3, 7, 6); // Arduino RX <-- e22 TX, Arduino TX --> e22 RX AUX M0 M1
                              ^
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/examples/Arduino_e22_08_receiveMessage/Arduino_e22_08_receiveMessage.ino:38:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/LoRa_E22.h:271:3: note: candidate: LoRa_E22::LoRa_E22(byte, byte, HardwareSerial*, UART_BPS_RATE, uint32_t) <near match>
   LoRa_E22(byte txE32pin, byte rxE32pin, HardwareSerial* serial, UART_BPS_RATE bpsRate, uint32_t serialConfig = SERIAL_8N1);
   ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/LoRa_E22.h:271:3: note:   conversion of argument 4 would be ill-formed:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/examples/Arduino_e22_08_receiveMessage/Arduino_e22_08_receiveMessage.ino:51:30: error: invalid conversion from 'int' to 'UART_BPS_RATE' [-fpermissive]
 LoRa_E22 e22ttl(4, 5, 3, 7, 6); // Arduino RX <-- e22 TX, Arduino TX --> e22 RX AUX M0 M1
                              ^
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/examples/Arduino_e22_08_receiveMessage/Arduino_e22_08_receiveMessage.ino:38:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/LoRa_E22.h:268:3: note: candidate: LoRa_E22::LoRa_E22(HardwareSerial*, byte, byte, byte, UART_BPS_RATE) <near match>
   LoRa_E22(HardwareSerial* serial, byte auxPin, byte m0Pin, byte m1Pin, UART_BPS_RATE bpsRate = UART_BPS_RATE_9600);
   ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/LoRa_E22.h:268:3: note:   conversion of argument 5 would be ill-formed:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/examples/Arduino_e22_08_receiveMessage/Arduino_e22_08_receiveMessage.ino:51:30: error: invalid conversion from 'int' to 'UART_BPS_RATE' [-fpermissive]
 LoRa_E22 e22ttl(4, 5, 3, 7, 6); // Arduino RX <-- e22 TX, Arduino TX --> e22 RX AUX M0 M1
                              ^

examples/Arduino_e22_SendTransparent

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/examples/Arduino_e22_SendTransparent/Arduino_e22_SendTransparent.ino:41:30: error: no matching function for call to 'LoRa_E22(int, int, int, int, int)'
 LoRa_E22 e22ttl(4, 5, 3, 7, 6); // Arduino RX <-- e22 TX, Arduino TX --> e22 RX AUX M0 M1
                              ^
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/examples/Arduino_e22_SendTransparent/Arduino_e22_SendTransparent.ino:28:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/LoRa_E22.h:272:3: note: candidate: LoRa_E22::LoRa_E22(byte, byte, HardwareSerial*, byte, UART_BPS_RATE, uint32_t) <near match>
   LoRa_E22(byte txE32pin, byte rxE32pin, HardwareSerial* serial, byte auxPin, UART_BPS_RATE bpsRate, uint32_t serialConfig = SERIAL_8N1);
   ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/LoRa_E22.h:272:3: note:   conversion of argument 5 would be ill-formed:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/examples/Arduino_e22_SendTransparent/Arduino_e22_SendTransparent.ino:41:30: error: invalid conversion from 'int' to 'UART_BPS_RATE' [-fpermissive]
 LoRa_E22 e22ttl(4, 5, 3, 7, 6); // Arduino RX <-- e22 TX, Arduino TX --> e22 RX AUX M0 M1
                              ^
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/examples/Arduino_e22_SendTransparent/Arduino_e22_SendTransparent.ino:28:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/LoRa_E22.h:271:3: note: candidate: LoRa_E22::LoRa_E22(byte, byte, HardwareSerial*, UART_BPS_RATE, uint32_t) <near match>
   LoRa_E22(byte txE32pin, byte rxE32pin, HardwareSerial* serial, UART_BPS_RATE bpsRate, uint32_t serialConfig = SERIAL_8N1);
   ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/LoRa_E22.h:271:3: note:   conversion of argument 4 would be ill-formed:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/examples/Arduino_e22_SendTransparent/Arduino_e22_SendTransparent.ino:41:30: error: invalid conversion from 'int' to 'UART_BPS_RATE' [-fpermissive]
 LoRa_E22 e22ttl(4, 5, 3, 7, 6); // Arduino RX <-- e22 TX, Arduino TX --> e22 RX AUX M0 M1
                              ^
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/examples/Arduino_e22_SendTransparent/Arduino_e22_SendTransparent.ino:28:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/LoRa_E22.h:268:3: note: candidate: LoRa_E22::LoRa_E22(HardwareSerial*, byte, byte, byte, UART_BPS_RATE) <near match>
   LoRa_E22(HardwareSerial* serial, byte auxPin, byte m0Pin, byte m1Pin, UART_BPS_RATE bpsRate = UART_BPS_RATE_9600);
   ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/LoRa_E22.h:268:3: note:   conversion of argument 5 would be ill-formed:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/examples/Arduino_e22_SendTransparent/Arduino_e22_SendTransparent.ino:41:30: error: invalid conversion from 'int' to 'UART_BPS_RATE' [-fpermissive]
 LoRa_E22 e22ttl(4, 5, 3, 7, 6); // Arduino RX <-- e22 TX, Arduino TX --> e22 RX AUX M0 M1
                              ^

examples/Arduino_e22_getConfiguration

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/examples/Arduino_e22_getConfiguration/Arduino_e22_getConfiguration.ino:31:30: error: no matching function for call to 'LoRa_E22(int, int, int, int, int)'
 LoRa_E22 e22ttl(4, 5, 3, 7, 6); // Arduino RX <-- e22 TX, Arduino TX --> e22 RX AUX M0 M1
                              ^
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/examples/Arduino_e22_getConfiguration/Arduino_e22_getConfiguration.ino:18:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/LoRa_E22.h:272:3: note: candidate: LoRa_E22::LoRa_E22(byte, byte, HardwareSerial*, byte, UART_BPS_RATE, uint32_t) <near match>
   LoRa_E22(byte txE32pin, byte rxE32pin, HardwareSerial* serial, byte auxPin, UART_BPS_RATE bpsRate, uint32_t serialConfig = SERIAL_8N1);
   ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/LoRa_E22.h:272:3: note:   conversion of argument 5 would be ill-formed:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/examples/Arduino_e22_getConfiguration/Arduino_e22_getConfiguration.ino:31:30: error: invalid conversion from 'int' to 'UART_BPS_RATE' [-fpermissive]
 LoRa_E22 e22ttl(4, 5, 3, 7, 6); // Arduino RX <-- e22 TX, Arduino TX --> e22 RX AUX M0 M1
                              ^
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/examples/Arduino_e22_getConfiguration/Arduino_e22_getConfiguration.ino:18:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/LoRa_E22.h:271:3: note: candidate: LoRa_E22::LoRa_E22(byte, byte, HardwareSerial*, UART_BPS_RATE, uint32_t) <near match>
   LoRa_E22(byte txE32pin, byte rxE32pin, HardwareSerial* serial, UART_BPS_RATE bpsRate, uint32_t serialConfig = SERIAL_8N1);
   ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/LoRa_E22.h:271:3: note:   conversion of argument 4 would be ill-formed:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/examples/Arduino_e22_getConfiguration/Arduino_e22_getConfiguration.ino:31:30: error: invalid conversion from 'int' to 'UART_BPS_RATE' [-fpermissive]
 LoRa_E22 e22ttl(4, 5, 3, 7, 6); // Arduino RX <-- e22 TX, Arduino TX --> e22 RX AUX M0 M1
                              ^
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/examples/Arduino_e22_getConfiguration/Arduino_e22_getConfiguration.ino:18:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/LoRa_E22.h:268:3: note: candidate: LoRa_E22::LoRa_E22(HardwareSerial*, byte, byte, byte, UART_BPS_RATE) <near match>
   LoRa_E22(HardwareSerial* serial, byte auxPin, byte m0Pin, byte m1Pin, UART_BPS_RATE bpsRate = UART_BPS_RATE_9600);
   ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/LoRa_E22.h:268:3: note:   conversion of argument 5 would be ill-formed:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/examples/Arduino_e22_getConfiguration/Arduino_e22_getConfiguration.ino:31:30: error: invalid conversion from 'int' to 'UART_BPS_RATE' [-fpermissive]
 LoRa_E22 e22ttl(4, 5, 3, 7, 6); // Arduino RX <-- e22 TX, Arduino TX --> e22 RX AUX M0 M1
                              ^

examples/Arduino_e22_setConfiguration

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/examples/Arduino_e22_setConfiguration/Arduino_e22_setConfiguration.ino:38:30: error: no matching function for call to 'LoRa_E22(int, int, int, int, int)'
 LoRa_E22 e22ttl(4, 5, 3, 7, 6); // Arduino RX <-- e22 TX, Arduino TX --> e22 RX AUX M0 M1
                              ^
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/examples/Arduino_e22_setConfiguration/Arduino_e22_setConfiguration.ino:18:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/LoRa_E22.h:272:3: note: candidate: LoRa_E22::LoRa_E22(byte, byte, HardwareSerial*, byte, UART_BPS_RATE, uint32_t) <near match>
   LoRa_E22(byte txE32pin, byte rxE32pin, HardwareSerial* serial, byte auxPin, UART_BPS_RATE bpsRate, uint32_t serialConfig = SERIAL_8N1);
   ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/LoRa_E22.h:272:3: note:   conversion of argument 5 would be ill-formed:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/examples/Arduino_e22_setConfiguration/Arduino_e22_setConfiguration.ino:38:30: error: invalid conversion from 'int' to 'UART_BPS_RATE' [-fpermissive]
 LoRa_E22 e22ttl(4, 5, 3, 7, 6); // Arduino RX <-- e22 TX, Arduino TX --> e22 RX AUX M0 M1
                              ^
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/examples/Arduino_e22_setConfiguration/Arduino_e22_setConfiguration.ino:18:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/LoRa_E22.h:271:3: note: candidate: LoRa_E22::LoRa_E22(byte, byte, HardwareSerial*, UART_BPS_RATE, uint32_t) <near match>
   LoRa_E22(byte txE32pin, byte rxE32pin, HardwareSerial* serial, UART_BPS_RATE bpsRate, uint32_t serialConfig = SERIAL_8N1);
   ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/LoRa_E22.h:271:3: note:   conversion of argument 4 would be ill-formed:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/examples/Arduino_e22_setConfiguration/Arduino_e22_setConfiguration.ino:38:30: error: invalid conversion from 'int' to 'UART_BPS_RATE' [-fpermissive]
 LoRa_E22 e22ttl(4, 5, 3, 7, 6); // Arduino RX <-- e22 TX, Arduino TX --> e22 RX AUX M0 M1
                              ^
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/examples/Arduino_e22_setConfiguration/Arduino_e22_setConfiguration.ino:18:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/LoRa_E22.h:268:3: note: candidate: LoRa_E22::LoRa_E22(HardwareSerial*, byte, byte, byte, UART_BPS_RATE) <near match>
   LoRa_E22(HardwareSerial* serial, byte auxPin, byte m0Pin, byte m1Pin, UART_BPS_RATE bpsRate = UART_BPS_RATE_9600);
   ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/LoRa_E22.h:268:3: note:   conversion of argument 5 would be ill-formed:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/examples/Arduino_e22_setConfiguration/Arduino_e22_setConfiguration.ino:38:30: error: invalid conversion from 'int' to 'UART_BPS_RATE' [-fpermissive]
 LoRa_E22 e22ttl(4, 5, 3, 7, 6); // Arduino RX <-- e22 TX, Arduino TX --> e22 RX AUX M0 M1
                              ^

examples/esp32_06_SendFixedTransmissionWOR

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/examples/esp32_06_SendFixedTransmissionWOR/esp32_06_SendFixedTransmissionWOR.ino: In function 'void loop()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/examples/esp32_06_SendFixedTransmissionWOR/esp32_06_SendFixedTransmissionWOR.ino:115:27: error: 'e220ttl' was not declared in this scope
   ResponseStatus rsSend = e220ttl.sendFixedMessage(0, DESTINATION_ADDL, 23, "We have received the message!");
                           ^

examples/esp32_e22_03_SendTransparentStructure

Result: PASS

Sketch uses 208234 bytes (15%) of program storage space. Maximum is 1310720 bytes.
Global variables use 13472 bytes (4%) of dynamic memory, leaving 314208 bytes for local variables. Maximum is 327680 bytes.

examples/esp32_e22_04_SendFixedTransmission

Result: PASS

Sketch uses 213182 bytes (16%) of program storage space. Maximum is 1310720 bytes.
Global variables use 13456 bytes (4%) of dynamic memory, leaving 314224 bytes for local variables. Maximum is 327680 bytes.

examples/esp32_e22_05_SendFixedTransmissionStructure

Result: PASS

Sketch uses 213622 bytes (16%) of program storage space. Maximum is 1310720 bytes.
Global variables use 13472 bytes (4%) of dynamic memory, leaving 314208 bytes for local variables. Maximum is 327680 bytes.

examples/esp32_e22_05_sendFixedTransmissionStructurePartial

Result: PASS

Sketch uses 209606 bytes (15%) of program storage space. Maximum is 1310720 bytes.
Global variables use 13456 bytes (4%) of dynamic memory, leaving 314224 bytes for local variables. Maximum is 327680 bytes.

examples/esp32_e22_SendTransparent

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/examples/esp32_e22_SendTransparent/esp32_e22_SendTransparent.ino:64:16: error: redefinition of 'LoRa_E22 e22ttl'
 LoRa_E22 e22ttl(&Serial2, 18, 21, 19); //  RX AUX M0 M1
                ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/examples/esp32_e22_SendTransparent/esp32_e22_SendTransparent.ino:58:10: note: 'LoRa_E22 e22ttl' previously declared here
 LoRa_E22 e22ttl(&Serial2, 18, 21, 19); //  RX AUX M0 M1
          ^

examples/esp32_e22_getConfiguration

Result: PASS

Sketch uses 212694 bytes (16%) of program storage space. Maximum is 1310720 bytes.
Global variables use 13456 bytes (4%) of dynamic memory, leaving 314224 bytes for local variables. Maximum is 327680 bytes.

examples/esp32_e22_sendBroadcastMessage

Result: PASS

Sketch uses 208686 bytes (15%) of program storage space. Maximum is 1310720 bytes.
Global variables use 13456 bytes (4%) of dynamic memory, leaving 314224 bytes for local variables. Maximum is 327680 bytes.

examples/esp32_e22_setConfiguration

Result: PASS

Sketch uses 212310 bytes (16%) of program storage space. Maximum is 1310720 bytes.
Global variables use 13456 bytes (4%) of dynamic memory, leaving 314224 bytes for local variables. Maximum is 327680 bytes.

examples/esp8266_e22_02_SendTransparent

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/examples/esp8266_e22_02_SendTransparent/esp8266_e22_02_SendTransparent.ino:31:35: error: no matching function for call to 'LoRa_E22(const uint8_t&, const uint8_t&, const uint8_t&, const uint8_t&, const uint8_t&)'
 LoRa_E22 e22ttl(D3, D4, D5, D7, D6); // Arduino RX <-- e22 TX, Arduino TX --> e22 RX AUX M0 M1
                                   ^
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/examples/esp8266_e22_02_SendTransparent/esp8266_e22_02_SendTransparent.ino:27:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/LoRa_E22.h:272:3: note: candidate: LoRa_E22::LoRa_E22(byte, byte, HardwareSerial*, byte, UART_BPS_RATE, uint32_t) <near match>
   LoRa_E22(byte txE32pin, byte rxE32pin, HardwareSerial* serial, byte auxPin, UART_BPS_RATE bpsRate, uint32_t serialConfig = SERIAL_8N1);
   ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/LoRa_E22.h:272:3: note:   conversion of argument 5 would be ill-formed:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/examples/esp8266_e22_02_SendTransparent/esp8266_e22_02_SendTransparent.ino:31:35: error: invalid conversion from 'uint8_t {aka unsigned char}' to 'UART_BPS_RATE' [-fpermissive]
 LoRa_E22 e22ttl(D3, D4, D5, D7, D6); // Arduino RX <-- e22 TX, Arduino TX --> e22 RX AUX M0 M1
                                   ^
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/examples/esp8266_e22_02_SendTransparent/esp8266_e22_02_SendTransparent.ino:27:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/LoRa_E22.h:271:3: note: candidate: LoRa_E22::LoRa_E22(byte, byte, HardwareSerial*, UART_BPS_RATE, uint32_t) <near match>
   LoRa_E22(byte txE32pin, byte rxE32pin, HardwareSerial* serial, UART_BPS_RATE bpsRate, uint32_t serialConfig = SERIAL_8N1);
   ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/LoRa_E22.h:271:3: note:   conversion of argument 4 would be ill-formed:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/examples/esp8266_e22_02_SendTransparent/esp8266_e22_02_SendTransparent.ino:31:35: error: invalid conversion from 'uint8_t {aka unsigned char}' to 'UART_BPS_RATE' [-fpermissive]
 LoRa_E22 e22ttl(D3, D4, D5, D7, D6); // Arduino RX <-- e22 TX, Arduino TX --> e22 RX AUX M0 M1
                                   ^
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/examples/esp8266_e22_02_SendTransparent/esp8266_e22_02_SendTransparent.ino:27:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/LoRa_E22.h:268:3: note: candidate: LoRa_E22::LoRa_E22(HardwareSerial*, byte, byte, byte, UART_BPS_RATE) <near match>
   LoRa_E22(HardwareSerial* serial, byte auxPin, byte m0Pin, byte m1Pin, UART_BPS_RATE bpsRate = UART_BPS_RATE_9600);
   ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/LoRa_E22.h:268:3: note:   conversion of argument 5 would be ill-formed:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/examples/esp8266_e22_02_SendTransparent/esp8266_e22_02_SendTransparent.ino:31:35: error: invalid conversion from 'uint8_t {aka unsigned char}' to 'UART_BPS_RATE' [-fpermissive]
 LoRa_E22 e22ttl(D3, D4, D5, D7, D6); // Arduino RX <-- e22 TX, Arduino TX --> e22 RX AUX M0 M1
                                   ^

examples/esp8266_e22_03_SendTransparentStructure

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/examples/esp8266_e22_03_SendTransparentStructure/esp8266_e22_03_SendTransparentStructure.ino:34:35: error: no matching function for call to 'LoRa_E22(const uint8_t&, const uint8_t&, const uint8_t&, const uint8_t&, const uint8_t&)'
 LoRa_E22 e22ttl(D3, D4, D5, D7, D6); // Arduino RX <-- e22 TX, Arduino TX --> e22 RX AUX M0 M1
                                   ^
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/examples/esp8266_e22_03_SendTransparentStructure/esp8266_e22_03_SendTransparentStructure.ino:30:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/LoRa_E22.h:272:3: note: candidate: LoRa_E22::LoRa_E22(byte, byte, HardwareSerial*, byte, UART_BPS_RATE, uint32_t) <near match>
   LoRa_E22(byte txE32pin, byte rxE32pin, HardwareSerial* serial, byte auxPin, UART_BPS_RATE bpsRate, uint32_t serialConfig = SERIAL_8N1);
   ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/LoRa_E22.h:272:3: note:   conversion of argument 5 would be ill-formed:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/examples/esp8266_e22_03_SendTransparentStructure/esp8266_e22_03_SendTransparentStructure.ino:34:35: error: invalid conversion from 'uint8_t {aka unsigned char}' to 'UART_BPS_RATE' [-fpermissive]
 LoRa_E22 e22ttl(D3, D4, D5, D7, D6); // Arduino RX <-- e22 TX, Arduino TX --> e22 RX AUX M0 M1
                                   ^
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/examples/esp8266_e22_03_SendTransparentStructure/esp8266_e22_03_SendTransparentStructure.ino:30:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/LoRa_E22.h:271:3: note: candidate: LoRa_E22::LoRa_E22(byte, byte, HardwareSerial*, UART_BPS_RATE, uint32_t) <near match>
   LoRa_E22(byte txE32pin, byte rxE32pin, HardwareSerial* serial, UART_BPS_RATE bpsRate, uint32_t serialConfig = SERIAL_8N1);
   ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/LoRa_E22.h:271:3: note:   conversion of argument 4 would be ill-formed:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/examples/esp8266_e22_03_SendTransparentStructure/esp8266_e22_03_SendTransparentStructure.ino:34:35: error: invalid conversion from 'uint8_t {aka unsigned char}' to 'UART_BPS_RATE' [-fpermissive]
 LoRa_E22 e22ttl(D3, D4, D5, D7, D6); // Arduino RX <-- e22 TX, Arduino TX --> e22 RX AUX M0 M1
                                   ^
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/examples/esp8266_e22_03_SendTransparentStructure/esp8266_e22_03_SendTransparentStructure.ino:30:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/LoRa_E22.h:268:3: note: candidate: LoRa_E22::LoRa_E22(HardwareSerial*, byte, byte, byte, UART_BPS_RATE) <near match>
   LoRa_E22(HardwareSerial* serial, byte auxPin, byte m0Pin, byte m1Pin, UART_BPS_RATE bpsRate = UART_BPS_RATE_9600);
   ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/LoRa_E22.h:268:3: note:   conversion of argument 5 would be ill-formed:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/examples/esp8266_e22_03_SendTransparentStructure/esp8266_e22_03_SendTransparentStructure.ino:34:35: error: invalid conversion from 'uint8_t {aka unsigned char}' to 'UART_BPS_RATE' [-fpermissive]
 LoRa_E22 e22ttl(D3, D4, D5, D7, D6); // Arduino RX <-- e22 TX, Arduino TX --> e22 RX AUX M0 M1
                                   ^

examples/esp8266_e22_04_SendFixedTransmission

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/examples/esp8266_e22_04_SendFixedTransmission/esp8266_e22_04_SendFixedTransmission.ino:43:35: error: no matching function for call to 'LoRa_E22(const uint8_t&, const uint8_t&, const uint8_t&, const uint8_t&, const uint8_t&)'
 LoRa_E22 e22ttl(D3, D4, D5, D7, D6); // Arduino RX <-- e22 TX, Arduino TX --> e22 RX AUX M0 M1
                                   ^
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/examples/esp8266_e22_04_SendFixedTransmission/esp8266_e22_04_SendFixedTransmission.ino:39:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/LoRa_E22.h:272:3: note: candidate: LoRa_E22::LoRa_E22(byte, byte, HardwareSerial*, byte, UART_BPS_RATE, uint32_t) <near match>
   LoRa_E22(byte txE32pin, byte rxE32pin, HardwareSerial* serial, byte auxPin, UART_BPS_RATE bpsRate, uint32_t serialConfig = SERIAL_8N1);
   ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/LoRa_E22.h:272:3: note:   conversion of argument 5 would be ill-formed:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/examples/esp8266_e22_04_SendFixedTransmission/esp8266_e22_04_SendFixedTransmission.ino:43:35: error: invalid conversion from 'uint8_t {aka unsigned char}' to 'UART_BPS_RATE' [-fpermissive]
 LoRa_E22 e22ttl(D3, D4, D5, D7, D6); // Arduino RX <-- e22 TX, Arduino TX --> e22 RX AUX M0 M1
                                   ^
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/examples/esp8266_e22_04_SendFixedTransmission/esp8266_e22_04_SendFixedTransmission.ino:39:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/LoRa_E22.h:271:3: note: candidate: LoRa_E22::LoRa_E22(byte, byte, HardwareSerial*, UART_BPS_RATE, uint32_t) <near match>
   LoRa_E22(byte txE32pin, byte rxE32pin, HardwareSerial* serial, UART_BPS_RATE bpsRate, uint32_t serialConfig = SERIAL_8N1);
   ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/LoRa_E22.h:271:3: note:   conversion of argument 4 would be ill-formed:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/examples/esp8266_e22_04_SendFixedTransmission/esp8266_e22_04_SendFixedTransmission.ino:43:35: error: invalid conversion from 'uint8_t {aka unsigned char}' to 'UART_BPS_RATE' [-fpermissive]
 LoRa_E22 e22ttl(D3, D4, D5, D7, D6); // Arduino RX <-- e22 TX, Arduino TX --> e22 RX AUX M0 M1
                                   ^
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/examples/esp8266_e22_04_SendFixedTransmission/esp8266_e22_04_SendFixedTransmission.ino:39:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/LoRa_E22.h:268:3: note: candidate: LoRa_E22::LoRa_E22(HardwareSerial*, byte, byte, byte, UART_BPS_RATE) <near match>
   LoRa_E22(HardwareSerial* serial, byte auxPin, byte m0Pin, byte m1Pin, UART_BPS_RATE bpsRate = UART_BPS_RATE_9600);
   ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/LoRa_E22.h:268:3: note:   conversion of argument 5 would be ill-formed:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/examples/esp8266_e22_04_SendFixedTransmission/esp8266_e22_04_SendFixedTransmission.ino:43:35: error: invalid conversion from 'uint8_t {aka unsigned char}' to 'UART_BPS_RATE' [-fpermissive]
 LoRa_E22 e22ttl(D3, D4, D5, D7, D6); // Arduino RX <-- e22 TX, Arduino TX --> e22 RX AUX M0 M1
                                   ^

examples/esp8266_e22_05_SendFixedTransmissionStructure

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/examples/esp8266_e22_05_SendFixedTransmissionStructure/esp8266_e22_05_SendFixedTransmissionStructure.ino:43:35: error: no matching function for call to 'LoRa_E22(const uint8_t&, const uint8_t&, const uint8_t&, const uint8_t&, const uint8_t&)'
 LoRa_E22 e22ttl(D3, D4, D5, D7, D6); // Arduino RX <-- e22 TX, Arduino TX --> e22 RX AUX M0 M1
                                   ^
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/examples/esp8266_e22_05_SendFixedTransmissionStructure/esp8266_e22_05_SendFixedTransmissionStructure.ino:39:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/LoRa_E22.h:272:3: note: candidate: LoRa_E22::LoRa_E22(byte, byte, HardwareSerial*, byte, UART_BPS_RATE, uint32_t) <near match>
   LoRa_E22(byte txE32pin, byte rxE32pin, HardwareSerial* serial, byte auxPin, UART_BPS_RATE bpsRate, uint32_t serialConfig = SERIAL_8N1);
   ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/LoRa_E22.h:272:3: note:   conversion of argument 5 would be ill-formed:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/examples/esp8266_e22_05_SendFixedTransmissionStructure/esp8266_e22_05_SendFixedTransmissionStructure.ino:43:35: error: invalid conversion from 'uint8_t {aka unsigned char}' to 'UART_BPS_RATE' [-fpermissive]
 LoRa_E22 e22ttl(D3, D4, D5, D7, D6); // Arduino RX <-- e22 TX, Arduino TX --> e22 RX AUX M0 M1
                                   ^
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/examples/esp8266_e22_05_SendFixedTransmissionStructure/esp8266_e22_05_SendFixedTransmissionStructure.ino:39:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/LoRa_E22.h:271:3: note: candidate: LoRa_E22::LoRa_E22(byte, byte, HardwareSerial*, UART_BPS_RATE, uint32_t) <near match>
   LoRa_E22(byte txE32pin, byte rxE32pin, HardwareSerial* serial, UART_BPS_RATE bpsRate, uint32_t serialConfig = SERIAL_8N1);
   ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/LoRa_E22.h:271:3: note:   conversion of argument 4 would be ill-formed:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/examples/esp8266_e22_05_SendFixedTransmissionStructure/esp8266_e22_05_SendFixedTransmissionStructure.ino:43:35: error: invalid conversion from 'uint8_t {aka unsigned char}' to 'UART_BPS_RATE' [-fpermissive]
 LoRa_E22 e22ttl(D3, D4, D5, D7, D6); // Arduino RX <-- e22 TX, Arduino TX --> e22 RX AUX M0 M1
                                   ^
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/examples/esp8266_e22_05_SendFixedTransmissionStructure/esp8266_e22_05_SendFixedTransmissionStructure.ino:39:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/LoRa_E22.h:268:3: note: candidate: LoRa_E22::LoRa_E22(HardwareSerial*, byte, byte, byte, UART_BPS_RATE) <near match>
   LoRa_E22(HardwareSerial* serial, byte auxPin, byte m0Pin, byte m1Pin, UART_BPS_RATE bpsRate = UART_BPS_RATE_9600);
   ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/LoRa_E22.h:268:3: note:   conversion of argument 5 would be ill-formed:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/examples/esp8266_e22_05_SendFixedTransmissionStructure/esp8266_e22_05_SendFixedTransmissionStructure.ino:43:35: error: invalid conversion from 'uint8_t {aka unsigned char}' to 'UART_BPS_RATE' [-fpermissive]
 LoRa_E22 e22ttl(D3, D4, D5, D7, D6); // Arduino RX <-- e22 TX, Arduino TX --> e22 RX AUX M0 M1
                                   ^

examples/esp8266_e22_06_WakeUpFromWOR

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/examples/esp8266_e22_06_WakeUpFromWOR/esp8266_e22_06_WakeUpFromWOR.ino:38:25: fatal error: ESP8266WiFi.h: No such file or directory
compilation terminated.

examples/esp8266_e22_07_sendBroadcastMessage

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/examples/esp8266_e22_07_sendBroadcastMessage/esp8266_e22_07_sendBroadcastMessage.ino:44:35: error: no matching function for call to 'LoRa_E22(const uint8_t&, const uint8_t&, const uint8_t&, const uint8_t&, const uint8_t&)'
 LoRa_E22 e22ttl(D3, D4, D5, D7, D6); // Arduino RX <-- e22 TX, Arduino TX --> e22 RX AUX M0 M1
                                   ^
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/examples/esp8266_e22_07_sendBroadcastMessage/esp8266_e22_07_sendBroadcastMessage.ino:40:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/LoRa_E22.h:272:3: note: candidate: LoRa_E22::LoRa_E22(byte, byte, HardwareSerial*, byte, UART_BPS_RATE, uint32_t) <near match>
   LoRa_E22(byte txE32pin, byte rxE32pin, HardwareSerial* serial, byte auxPin, UART_BPS_RATE bpsRate, uint32_t serialConfig = SERIAL_8N1);
   ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/LoRa_E22.h:272:3: note:   conversion of argument 5 would be ill-formed:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/examples/esp8266_e22_07_sendBroadcastMessage/esp8266_e22_07_sendBroadcastMessage.ino:44:35: error: invalid conversion from 'uint8_t {aka unsigned char}' to 'UART_BPS_RATE' [-fpermissive]
 LoRa_E22 e22ttl(D3, D4, D5, D7, D6); // Arduino RX <-- e22 TX, Arduino TX --> e22 RX AUX M0 M1
                                   ^
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/examples/esp8266_e22_07_sendBroadcastMessage/esp8266_e22_07_sendBroadcastMessage.ino:40:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/LoRa_E22.h:271:3: note: candidate: LoRa_E22::LoRa_E22(byte, byte, HardwareSerial*, UART_BPS_RATE, uint32_t) <near match>
   LoRa_E22(byte txE32pin, byte rxE32pin, HardwareSerial* serial, UART_BPS_RATE bpsRate, uint32_t serialConfig = SERIAL_8N1);
   ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/LoRa_E22.h:271:3: note:   conversion of argument 4 would be ill-formed:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/examples/esp8266_e22_07_sendBroadcastMessage/esp8266_e22_07_sendBroadcastMessage.ino:44:35: error: invalid conversion from 'uint8_t {aka unsigned char}' to 'UART_BPS_RATE' [-fpermissive]
 LoRa_E22 e22ttl(D3, D4, D5, D7, D6); // Arduino RX <-- e22 TX, Arduino TX --> e22 RX AUX M0 M1
                                   ^
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/examples/esp8266_e22_07_sendBroadcastMessage/esp8266_e22_07_sendBroadcastMessage.ino:40:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/LoRa_E22.h:268:3: note: candidate: LoRa_E22::LoRa_E22(HardwareSerial*, byte, byte, byte, UART_BPS_RATE) <near match>
   LoRa_E22(HardwareSerial* serial, byte auxPin, byte m0Pin, byte m1Pin, UART_BPS_RATE bpsRate = UART_BPS_RATE_9600);
   ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/LoRa_E22.h:268:3: note:   conversion of argument 5 would be ill-formed:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/examples/esp8266_e22_07_sendBroadcastMessage/esp8266_e22_07_sendBroadcastMessage.ino:44:35: error: invalid conversion from 'uint8_t {aka unsigned char}' to 'UART_BPS_RATE' [-fpermissive]
 LoRa_E22 e22ttl(D3, D4, D5, D7, D6); // Arduino RX <-- e22 TX, Arduino TX --> e22 RX AUX M0 M1
                                   ^

examples/esp8266_e22_getConfiguration

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/examples/esp8266_e22_getConfiguration/esp8266_e22_getConfiguration.ino:22:35: error: no matching function for call to 'LoRa_E22(const uint8_t&, const uint8_t&, const uint8_t&, const uint8_t&, const uint8_t&)'
 LoRa_E22 e22ttl(D3, D4, D5, D7, D6); // Arduino RX <-- e22 TX, Arduino TX --> e22 RX AUX M0 M1
                                   ^
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/examples/esp8266_e22_getConfiguration/esp8266_e22_getConfiguration.ino:18:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/LoRa_E22.h:272:3: note: candidate: LoRa_E22::LoRa_E22(byte, byte, HardwareSerial*, byte, UART_BPS_RATE, uint32_t) <near match>
   LoRa_E22(byte txE32pin, byte rxE32pin, HardwareSerial* serial, byte auxPin, UART_BPS_RATE bpsRate, uint32_t serialConfig = SERIAL_8N1);
   ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/LoRa_E22.h:272:3: note:   conversion of argument 5 would be ill-formed:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/examples/esp8266_e22_getConfiguration/esp8266_e22_getConfiguration.ino:22:35: error: invalid conversion from 'uint8_t {aka unsigned char}' to 'UART_BPS_RATE' [-fpermissive]
 LoRa_E22 e22ttl(D3, D4, D5, D7, D6); // Arduino RX <-- e22 TX, Arduino TX --> e22 RX AUX M0 M1
                                   ^
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/examples/esp8266_e22_getConfiguration/esp8266_e22_getConfiguration.ino:18:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/LoRa_E22.h:271:3: note: candidate: LoRa_E22::LoRa_E22(byte, byte, HardwareSerial*, UART_BPS_RATE, uint32_t) <near match>
   LoRa_E22(byte txE32pin, byte rxE32pin, HardwareSerial* serial, UART_BPS_RATE bpsRate, uint32_t serialConfig = SERIAL_8N1);
   ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/LoRa_E22.h:271:3: note:   conversion of argument 4 would be ill-formed:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/examples/esp8266_e22_getConfiguration/esp8266_e22_getConfiguration.ino:22:35: error: invalid conversion from 'uint8_t {aka unsigned char}' to 'UART_BPS_RATE' [-fpermissive]
 LoRa_E22 e22ttl(D3, D4, D5, D7, D6); // Arduino RX <-- e22 TX, Arduino TX --> e22 RX AUX M0 M1
                                   ^
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/examples/esp8266_e22_getConfiguration/esp8266_e22_getConfiguration.ino:18:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/LoRa_E22.h:268:3: note: candidate: LoRa_E22::LoRa_E22(HardwareSerial*, byte, byte, byte, UART_BPS_RATE) <near match>
   LoRa_E22(HardwareSerial* serial, byte auxPin, byte m0Pin, byte m1Pin, UART_BPS_RATE bpsRate = UART_BPS_RATE_9600);
   ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/LoRa_E22.h:268:3: note:   conversion of argument 5 would be ill-formed:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/examples/esp8266_e22_getConfiguration/esp8266_e22_getConfiguration.ino:22:35: error: invalid conversion from 'uint8_t {aka unsigned char}' to 'UART_BPS_RATE' [-fpermissive]
 LoRa_E22 e22ttl(D3, D4, D5, D7, D6); // Arduino RX <-- e22 TX, Arduino TX --> e22 RX AUX M0 M1
                                   ^

examples/esp8266_e22_setConfiguration

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/examples/esp8266_e22_setConfiguration/esp8266_e22_setConfiguration.ino:22:35: error: no matching function for call to 'LoRa_E22(const uint8_t&, const uint8_t&, const uint8_t&, const uint8_t&, const uint8_t&)'
 LoRa_E22 e22ttl(D3, D4, D5, D7, D6); // Arduino RX <-- e22 TX, Arduino TX --> e22 RX AUX M0 M1
                                   ^
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/examples/esp8266_e22_setConfiguration/esp8266_e22_setConfiguration.ino:18:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/LoRa_E22.h:272:3: note: candidate: LoRa_E22::LoRa_E22(byte, byte, HardwareSerial*, byte, UART_BPS_RATE, uint32_t) <near match>
   LoRa_E22(byte txE32pin, byte rxE32pin, HardwareSerial* serial, byte auxPin, UART_BPS_RATE bpsRate, uint32_t serialConfig = SERIAL_8N1);
   ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/LoRa_E22.h:272:3: note:   conversion of argument 5 would be ill-formed:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/examples/esp8266_e22_setConfiguration/esp8266_e22_setConfiguration.ino:22:35: error: invalid conversion from 'uint8_t {aka unsigned char}' to 'UART_BPS_RATE' [-fpermissive]
 LoRa_E22 e22ttl(D3, D4, D5, D7, D6); // Arduino RX <-- e22 TX, Arduino TX --> e22 RX AUX M0 M1
                                   ^
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/examples/esp8266_e22_setConfiguration/esp8266_e22_setConfiguration.ino:18:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/LoRa_E22.h:271:3: note: candidate: LoRa_E22::LoRa_E22(byte, byte, HardwareSerial*, UART_BPS_RATE, uint32_t) <near match>
   LoRa_E22(byte txE32pin, byte rxE32pin, HardwareSerial* serial, UART_BPS_RATE bpsRate, uint32_t serialConfig = SERIAL_8N1);
   ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/LoRa_E22.h:271:3: note:   conversion of argument 4 would be ill-formed:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/examples/esp8266_e22_setConfiguration/esp8266_e22_setConfiguration.ino:22:35: error: invalid conversion from 'uint8_t {aka unsigned char}' to 'UART_BPS_RATE' [-fpermissive]
 LoRa_E22 e22ttl(D3, D4, D5, D7, D6); // Arduino RX <-- e22 TX, Arduino TX --> e22 RX AUX M0 M1
                                   ^
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/examples/esp8266_e22_setConfiguration/esp8266_e22_setConfiguration.ino:18:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/LoRa_E22.h:268:3: note: candidate: LoRa_E22::LoRa_E22(HardwareSerial*, byte, byte, byte, UART_BPS_RATE) <near match>
   LoRa_E22(HardwareSerial* serial, byte auxPin, byte m0Pin, byte m1Pin, UART_BPS_RATE bpsRate = UART_BPS_RATE_9600);
   ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/LoRa_E22.h:268:3: note:   conversion of argument 5 would be ill-formed:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EByte_LoRa_E22_library/examples/esp8266_e22_setConfiguration/esp8266_e22_setConfiguration.ino:22:35: error: invalid conversion from 'uint8_t {aka unsigned char}' to 'UART_BPS_RATE' [-fpermissive]
 LoRa_E22 e22ttl(D3, D4, D5, D7, D6); // Arduino RX <-- e22 TX, Arduino TX --> e22 RX AUX M0 M1
                                   ^