EEPROMsimple - compatibility matrix

This report was generated on Wednesday, 23-Feb-22 22:48:15 CET using arduino-testlib.

EEPROMsimple

Version: 1.0.2
More details

Compatibility matrix

Board	Claims compatibility	Inclusion	RWarrays	RWsingle	RWstruct
arduino:avr:uno 1.8.4	Yes	PASS	PASS	PASS	PASS
arduino:mbed_nano:nanorp2040connect 2.7.2	No	FAIL	FAIL	FAIL	FAIL
arduino:megaavr:nona4809 1.8.7	No ⚠️	PASS	PASS	PASS	PASS
arduino:samd:mkrwifi1010 1.8.12	No ⚠️	PASS	PASS	PASS	PASS
esp32:esp32:d1_mini32 1.0.6	No ⚠️	PASS	PASS	PASS	PASS

Compilation logs

arduino:avr:uno @ 1.8.4

Inclusion

Result: PASS

Sketch uses 444 bytes (1%) of program storage space. Maximum is 32256 bytes.
Global variables use 9 bytes (0%) of dynamic memory, leaving 2039 bytes for local variables. Maximum is 2048 bytes.

examples/RWarrays

Result: PASS

Sketch uses 6174 bytes (19%) of program storage space. Maximum is 32256 bytes.
Global variables use 811 bytes (39%) of dynamic memory, leaving 1237 bytes for local variables. Maximum is 2048 bytes.

examples/RWsingle

Result: PASS

Sketch uses 5464 bytes (16%) of program storage space. Maximum is 32256 bytes.
Global variables use 615 bytes (30%) of dynamic memory, leaving 1433 bytes for local variables. Maximum is 2048 bytes.

examples/RWstruct

Result: PASS

Sketch uses 4130 bytes (12%) of program storage space. Maximum is 32256 bytes.
Global variables use 309 bytes (15%) of dynamic memory, leaving 1739 bytes for local variables. Maximum is 2048 bytes.

arduino:mbed_nano:nanorp2040connect @ 2.7.2

Inclusion

Result: FAIL

WARNING: library EEPROMsimple claims to run on avr architecture(s) and may be incompatible with your current board which runs on mbed_nano architecture(s).
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EEPROMsimple/EEPROMsimple.cpp: In member function 'void EEPROMsimple::SetMode(byte)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EEPROMsimple/EEPROMsimple.cpp:20:7: error: 'class arduino::MbedSPI' has no member named 'setBitOrder'
   SPI.setBitOrder(MSBFIRST);
       ^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EEPROMsimple/EEPROMsimple.cpp:21:7: error: 'class arduino::MbedSPI' has no member named 'setDataMode'
   SPI.setDataMode(SPI_MODE0);
       ^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EEPROMsimple/EEPROMsimple.cpp:22:7: error: 'class arduino::MbedSPI' has no member named 'setClockDivider'
   SPI.setClockDivider(SPI_CLOCK_DIV2); // max clock is 20MHz, so can set high speed
       ^~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EEPROMsimple/EEPROMsimple.cpp:22:23: error: 'SPI_CLOCK_DIV2' was not declared in this scope
   SPI.setClockDivider(SPI_CLOCK_DIV2); // max clock is 20MHz, so can set high speed
                       ^~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EEPROMsimple/EEPROMsimple.cpp:22:23: note: suggested alternative: 'SPI_CPOL_1'
   SPI.setClockDivider(SPI_CLOCK_DIV2); // max clock is 20MHz, so can set high speed
                       ^~~~~~~~~~~~~~
                       SPI_CPOL_1

examples/RWarrays

Result: FAIL

WARNING: library EEPROMsimple claims to run on avr architecture(s) and may be incompatible with your current board which runs on mbed_nano architecture(s).
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EEPROMsimple/EEPROMsimple.cpp: In member function 'void EEPROMsimple::SetMode(byte)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EEPROMsimple/EEPROMsimple.cpp:20:7: error: 'class arduino::MbedSPI' has no member named 'setBitOrder'
   SPI.setBitOrder(MSBFIRST);
       ^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EEPROMsimple/EEPROMsimple.cpp:21:7: error: 'class arduino::MbedSPI' has no member named 'setDataMode'
   SPI.setDataMode(SPI_MODE0);
       ^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EEPROMsimple/EEPROMsimple.cpp:22:7: error: 'class arduino::MbedSPI' has no member named 'setClockDivider'
   SPI.setClockDivider(SPI_CLOCK_DIV2); // max clock is 20MHz, so can set high speed
       ^~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EEPROMsimple/EEPROMsimple.cpp:22:23: error: 'SPI_CLOCK_DIV2' was not declared in this scope
   SPI.setClockDivider(SPI_CLOCK_DIV2); // max clock is 20MHz, so can set high speed
                       ^~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EEPROMsimple/EEPROMsimple.cpp:22:23: note: suggested alternative: 'SPI_CPOL_1'
   SPI.setClockDivider(SPI_CLOCK_DIV2); // max clock is 20MHz, so can set high speed
                       ^~~~~~~~~~~~~~
                       SPI_CPOL_1

examples/RWsingle

Result: FAIL

WARNING: library EEPROMsimple claims to run on avr architecture(s) and may be incompatible with your current board which runs on mbed_nano architecture(s).
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EEPROMsimple/EEPROMsimple.cpp: In member function 'void EEPROMsimple::SetMode(byte)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EEPROMsimple/EEPROMsimple.cpp:20:7: error: 'class arduino::MbedSPI' has no member named 'setBitOrder'
   SPI.setBitOrder(MSBFIRST);
       ^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EEPROMsimple/EEPROMsimple.cpp:21:7: error: 'class arduino::MbedSPI' has no member named 'setDataMode'
   SPI.setDataMode(SPI_MODE0);
       ^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EEPROMsimple/EEPROMsimple.cpp:22:7: error: 'class arduino::MbedSPI' has no member named 'setClockDivider'
   SPI.setClockDivider(SPI_CLOCK_DIV2); // max clock is 20MHz, so can set high speed
       ^~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EEPROMsimple/EEPROMsimple.cpp:22:23: error: 'SPI_CLOCK_DIV2' was not declared in this scope
   SPI.setClockDivider(SPI_CLOCK_DIV2); // max clock is 20MHz, so can set high speed
                       ^~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EEPROMsimple/EEPROMsimple.cpp:22:23: note: suggested alternative: 'SPI_CPOL_1'
   SPI.setClockDivider(SPI_CLOCK_DIV2); // max clock is 20MHz, so can set high speed
                       ^~~~~~~~~~~~~~
                       SPI_CPOL_1

examples/RWstruct

Result: FAIL

WARNING: library EEPROMsimple claims to run on avr architecture(s) and may be incompatible with your current board which runs on mbed_nano architecture(s).
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EEPROMsimple/EEPROMsimple.cpp: In member function 'void EEPROMsimple::SetMode(byte)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EEPROMsimple/EEPROMsimple.cpp:20:7: error: 'class arduino::MbedSPI' has no member named 'setBitOrder'
   SPI.setBitOrder(MSBFIRST);
       ^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EEPROMsimple/EEPROMsimple.cpp:21:7: error: 'class arduino::MbedSPI' has no member named 'setDataMode'
   SPI.setDataMode(SPI_MODE0);
       ^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EEPROMsimple/EEPROMsimple.cpp:22:7: error: 'class arduino::MbedSPI' has no member named 'setClockDivider'
   SPI.setClockDivider(SPI_CLOCK_DIV2); // max clock is 20MHz, so can set high speed
       ^~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EEPROMsimple/EEPROMsimple.cpp:22:23: error: 'SPI_CLOCK_DIV2' was not declared in this scope
   SPI.setClockDivider(SPI_CLOCK_DIV2); // max clock is 20MHz, so can set high speed
                       ^~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EEPROMsimple/EEPROMsimple.cpp:22:23: note: suggested alternative: 'SPI_CPOL_1'
   SPI.setClockDivider(SPI_CLOCK_DIV2); // max clock is 20MHz, so can set high speed
                       ^~~~~~~~~~~~~~
                       SPI_CPOL_1

arduino:megaavr:nona4809 @ 1.8.7

Inclusion

Result: PASS

WARNING: library EEPROMsimple claims to run on avr architecture(s) and may be incompatible with your current board which runs on megaavr architecture(s).
Sketch uses 3246 bytes (6%) of program storage space. Maximum is 49152 bytes.
Global variables use 40 bytes (0%) of dynamic memory, leaving 6104 bytes for local variables. Maximum is 6144 bytes.

examples/RWarrays

Result: PASS

WARNING: library EEPROMsimple claims to run on avr architecture(s) and may be incompatible with your current board which runs on megaavr architecture(s).
Sketch uses 9307 bytes (18%) of program storage space. Maximum is 49152 bytes.
Global variables use 463 bytes (7%) of dynamic memory, leaving 5681 bytes for local variables. Maximum is 6144 bytes.

examples/RWsingle

Result: PASS

WARNING: library EEPROMsimple claims to run on avr architecture(s) and may be incompatible with your current board which runs on megaavr architecture(s).
Sketch uses 8648 bytes (17%) of program storage space. Maximum is 49152 bytes.
Global variables use 263 bytes (4%) of dynamic memory, leaving 5881 bytes for local variables. Maximum is 6144 bytes.

examples/RWstruct

Result: PASS

WARNING: library EEPROMsimple claims to run on avr architecture(s) and may be incompatible with your current board which runs on megaavr architecture(s).
Sketch uses 7267 bytes (14%) of program storage space. Maximum is 49152 bytes.
Global variables use 263 bytes (4%) of dynamic memory, leaving 5881 bytes for local variables. Maximum is 6144 bytes.

arduino:samd:mkrwifi1010 @ 1.8.12

Inclusion

Result: PASS

WARNING: library EEPROMsimple claims to run on avr architecture(s) and may be incompatible with your current board which runs on samd architecture(s).
Sketch uses 13336 bytes (5%) of program storage space. Maximum is 262144 bytes.
Global variables use 3068 bytes (9%) of dynamic memory, leaving 29700 bytes for local variables. Maximum is 32768 bytes.

examples/RWarrays

Result: PASS

WARNING: library EEPROMsimple claims to run on avr architecture(s) and may be incompatible with your current board which runs on samd architecture(s).
Sketch uses 25300 bytes (9%) of program storage space. Maximum is 262144 bytes.
Global variables use 3320 bytes (10%) of dynamic memory, leaving 29448 bytes for local variables. Maximum is 32768 bytes.

examples/RWsingle

Result: PASS

WARNING: library EEPROMsimple claims to run on avr architecture(s) and may be incompatible with your current board which runs on samd architecture(s).
Sketch uses 24324 bytes (9%) of program storage space. Maximum is 262144 bytes.
Global variables use 3088 bytes (9%) of dynamic memory, leaving 29680 bytes for local variables. Maximum is 32768 bytes.

examples/RWstruct

Result: PASS

WARNING: library EEPROMsimple claims to run on avr architecture(s) and may be incompatible with your current board which runs on samd architecture(s).
Sketch uses 22768 bytes (8%) of program storage space. Maximum is 262144 bytes.
Global variables use 3088 bytes (9%) of dynamic memory, leaving 29680 bytes for local variables. Maximum is 32768 bytes.

esp32:esp32:d1_mini32 @ 1.0.6

Inclusion

Result: PASS

WARNING: library EEPROMsimple claims to run on avr architecture(s) and may be incompatible with your current board which runs on esp32 architecture(s).
Sketch uses 199186 bytes (15%) of program storage space. Maximum is 1310720 bytes.
Global variables use 13128 bytes (4%) of dynamic memory, leaving 314552 bytes for local variables. Maximum is 327680 bytes.

examples/RWarrays

Result: PASS

WARNING: library EEPROMsimple claims to run on avr architecture(s) and may be incompatible with your current board which runs on esp32 architecture(s).
Sketch uses 212042 bytes (16%) of program storage space. Maximum is 1310720 bytes.
Global variables use 13752 bytes (4%) of dynamic memory, leaving 313928 bytes for local variables. Maximum is 327680 bytes.

examples/RWsingle

Result: PASS

WARNING: library EEPROMsimple claims to run on avr architecture(s) and may be incompatible with your current board which runs on esp32 architecture(s).
Sketch uses 210990 bytes (16%) of program storage space. Maximum is 1310720 bytes.
Global variables use 13504 bytes (4%) of dynamic memory, leaving 314176 bytes for local variables. Maximum is 327680 bytes.

examples/RWstruct

Result: PASS

WARNING: library EEPROMsimple claims to run on avr architecture(s) and may be incompatible with your current board which runs on esp32 architecture(s).
Sketch uses 209514 bytes (15%) of program storage space. Maximum is 1310720 bytes.
Global variables use 13504 bytes (4%) of dynamic memory, leaving 314176 bytes for local variables. Maximum is 327680 bytes.