ESP32 ESP32S2 AnalogWrite - compatibility matrix

This report was generated on Wednesday, 23-Feb-22 22:48:15 CET using arduino-testlib.

ESP32 ESP32S2 AnalogWrite

Version: 2.0.9
More details

Compatibility matrix

Board Claims compatibility Inclusion 
AnalogWriteTest
 
Fade
arduino:avr:uno
1.8.4 		No FAIL FAIL FAIL
arduino:mbed_nano:nanorp2040connect
2.7.2 		No FAIL FAIL FAIL
arduino:megaavr:nona4809
1.8.7 		No FAIL FAIL FAIL
arduino:samd:mkrwifi1010
1.8.12 		No FAIL FAIL FAIL
esp32:esp32:d1_mini32
1.0.6 		Yes PASS PASS PASS

Compilation logs

arduino:avr:uno @ 1.8.4

Inclusion

Result: FAIL
This library has no main header file so an empty one was created. 

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ESP32_AnalogWrite/analogWrite.cpp: In function 'int analogWriteChannel(uint8_t)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ESP32_AnalogWrite/analogWrite.cpp:44:9: error: 'ledcSetup' was not declared in this scope
         ledcSetup(channel, _analog_write_channels[i].frequency, _analog_write_channels[i].resolution);
         ^~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ESP32_AnalogWrite/analogWrite.cpp:45:9: error: 'ledcAttachPin' was not declared in this scope
         ledcAttachPin(pin, channel);
         ^~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ESP32_AnalogWrite/analogWrite.cpp: In function 'void analogWrite(uint8_t, uint32_t, uint32_t)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ESP32_AnalogWrite/analogWrite.cpp:104:5: error: 'ledcWrite' was not declared in this scope
     ledcWrite(channel, duty);
     ^~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ESP32_AnalogWrite/analogWrite.cpp:104:5: note: suggested alternative: 'bitWrite'
     ledcWrite(channel, duty);
     ^~~~~~~~~
     bitWrite
Multiple libraries were found for "analogWrite.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ESP32_AnalogWrite
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ESP32Servo
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ESP32_ESP32S2_AnalogWrite

examples/AnalogWriteTest

Result: FAIL 

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ESP32_ESP32S2_AnalogWrite/examples/AnalogWriteTest/AnalogWriteTest.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ESP32_ESP32S2_AnalogWrite/examples/AnalogWriteTest/AnalogWriteTest.ino:11:33: error: no matching function for call to 'analogWrite(int, int, int, int, int)'
   analogWrite(4, 341, 100, 10, 0);
                                 ^
In file included from /tmp/arduino-sketch-CC9B1EFC77787A92E8AD142725683CD1/sketch/AnalogWriteTest.ino.cpp:1:0:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/avr/1.8.4/cores/arduino/Arduino.h:139:6: note: candidate: void analogWrite(uint8_t, int)
 void analogWrite(uint8_t pin, int val);
      ^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/avr/1.8.4/cores/arduino/Arduino.h:139:6: note:   candidate expects 2 arguments, 5 provided
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ESP32_ESP32S2_AnalogWrite/examples/AnalogWriteTest/AnalogWriteTest.ino:3:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ESP32_AnalogWrite/analogWrite.h:21:6: note: candidate: void analogWrite(uint8_t, uint32_t, uint32_t)
 void analogWrite(uint8_t pin, uint32_t value, uint32_t valueMax = 255);
      ^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ESP32_AnalogWrite/analogWrite.h:21:6: note:   candidate expects 3 arguments, 5 provided
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ESP32_ESP32S2_AnalogWrite/examples/AnalogWriteTest/AnalogWriteTest.ino:12:35: error: no matching function for call to 'analogWrite(int, int, int, int, int)'
   analogWrite(5, 341, 100, 10, 341);
                                   ^
In file included from /tmp/arduino-sketch-CC9B1EFC77787A92E8AD142725683CD1/sketch/AnalogWriteTest.ino.cpp:1:0:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/avr/1.8.4/cores/arduino/Arduino.h:139:6: note: candidate: void analogWrite(uint8_t, int)
 void analogWrite(uint8_t pin, int val);
      ^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/avr/1.8.4/cores/arduino/Arduino.h:139:6: note:   candidate expects 2 arguments, 5 provided
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ESP32_ESP32S2_AnalogWrite/examples/AnalogWriteTest/AnalogWriteTest.ino:3:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ESP32_AnalogWrite/analogWrite.h:21:6: note: candidate: void analogWrite(uint8_t, uint32_t, uint32_t)
 void analogWrite(uint8_t pin, uint32_t value, uint32_t valueMax = 255);
      ^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ESP32_AnalogWrite/analogWrite.h:21:6: note:   candidate expects 3 arguments, 5 provided
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ESP32_ESP32S2_AnalogWrite/examples/AnalogWriteTest/AnalogWriteTest.ino:13:36: error: no matching function for call to 'analogWrite(int, int, int, int, int)'
   analogWrite(12, 341, 100, 10, 682);
                                    ^
In file included from /tmp/arduino-sketch-CC9B1EFC77787A92E8AD142725683CD1/sketch/AnalogWriteTest.ino.cpp:1:0:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/avr/1.8.4/cores/arduino/Arduino.h:139:6: note: candidate: void analogWrite(uint8_t, int)
 void analogWrite(uint8_t pin, int val);
      ^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/avr/1.8.4/cores/arduino/Arduino.h:139:6: note:   candidate expects 2 arguments, 5 provided
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ESP32_ESP32S2_AnalogWrite/examples/AnalogWriteTest/AnalogWriteTest.ino:3:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ESP32_AnalogWrite/analogWrite.h:21:6: note: candidate: void analogWrite(uint8_t, uint32_t, uint32_t)
 void analogWrite(uint8_t pin, uint32_t value, uint32_t valueMax = 255);
      ^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ESP32_AnalogWrite/analogWrite.h:21:6: note:   candidate expects 3 arguments, 5 provided
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ESP32_ESP32S2_AnalogWrite/examples/AnalogWriteTest/AnalogWriteTest.ino:15:3: error: 'printPinsStatus' was not declared in this scope
   printPinsStatus();
   ^~~~~~~~~~~~~~~
Multiple libraries were found for "analogWrite.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ESP32_AnalogWrite
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ESP32Servo
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ESP32_ESP32S2_AnalogWrite

examples/Fade

Result: FAIL 

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ESP32_AnalogWrite/analogWrite.cpp: In function 'int analogWriteChannel(uint8_t)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ESP32_AnalogWrite/analogWrite.cpp:44:9: error: 'ledcSetup' was not declared in this scope
         ledcSetup(channel, _analog_write_channels[i].frequency, _analog_write_channels[i].resolution);
         ^~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ESP32_AnalogWrite/analogWrite.cpp:45:9: error: 'ledcAttachPin' was not declared in this scope
         ledcAttachPin(pin, channel);
         ^~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ESP32_AnalogWrite/analogWrite.cpp: In function 'void analogWrite(uint8_t, uint32_t, uint32_t)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ESP32_AnalogWrite/analogWrite.cpp:104:5: error: 'ledcWrite' was not declared in this scope
     ledcWrite(channel, duty);
     ^~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ESP32_AnalogWrite/analogWrite.cpp:104:5: note: suggested alternative: 'bitWrite'
     ledcWrite(channel, duty);
     ^~~~~~~~~
     bitWrite
Multiple libraries were found for "analogWrite.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ESP32_AnalogWrite
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ESP32_ESP32S2_AnalogWrite
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ESP32Servo

arduino:mbed_nano:nanorp2040connect @ 2.7.2

Inclusion

Result: FAIL
This library has no main header file so an empty one was created. 

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ESP32_AnalogWrite/analogWrite.cpp: In function 'int analogWriteChannel(uint8_t)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ESP32_AnalogWrite/analogWrite.cpp:44:9: error: 'ledcSetup' was not declared in this scope
         ledcSetup(channel, _analog_write_channels[i].frequency, _analog_write_channels[i].resolution);
         ^~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ESP32_AnalogWrite/analogWrite.cpp:45:9: error: 'ledcAttachPin' was not declared in this scope
         ledcAttachPin(pin, channel);
         ^~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ESP32_AnalogWrite/analogWrite.cpp: In function 'void analogWrite(uint8_t, uint32_t, uint32_t)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ESP32_AnalogWrite/analogWrite.cpp:104:5: error: 'ledcWrite' was not declared in this scope
     ledcWrite(channel, duty);
     ^~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ESP32_AnalogWrite/analogWrite.cpp:104:5: note: suggested alternative: 'bitWrite'
     ledcWrite(channel, duty);
     ^~~~~~~~~
     bitWrite
Multiple libraries were found for "analogWrite.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ESP32_AnalogWrite
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ESP32_ESP32S2_AnalogWrite
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ESP32Servo

examples/AnalogWriteTest

Result: FAIL 

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ESP32_ESP32S2_AnalogWrite/examples/AnalogWriteTest/AnalogWriteTest.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ESP32_ESP32S2_AnalogWrite/examples/AnalogWriteTest/AnalogWriteTest.ino:11:33: error: no matching function for call to 'analogWrite(int, int, int, int, int)'
   analogWrite(4, 341, 100, 10, 0);
                                 ^
In file included from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/variants/NANO_RP2040_CONNECT/pinmode_arduino.h:30:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/cores/arduino/Arduino.h:26,
                 from /tmp/arduino-sketch-CC9B1EFC77787A92E8AD142725683CD1/sketch/AnalogWriteTest.ino.cpp:1:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/cores/arduino/api/Common.h:100:6: note: candidate: void analogWrite(pin_size_t, int)
 void analogWrite(pin_size_t pinNumber, int value);
      ^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/cores/arduino/api/Common.h:100:6: note:   candidate expects 2 arguments, 5 provided
In file included from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/variants/NANO_RP2040_CONNECT/pins_arduino.h:127:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/cores/arduino/Arduino.h:76,
                 from /tmp/arduino-sketch-CC9B1EFC77787A92E8AD142725683CD1/sketch/AnalogWriteTest.ino.cpp:1:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/variants/NANO_RP2040_CONNECT/nina_pins.h:62:26: note: candidate: void analogWrite(NinaPin, int)
 void      NINA_ATTRIBUTE analogWrite (NinaPin pin, int value);
                          ^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/variants/NANO_RP2040_CONNECT/nina_pins.h:62:26: note:   candidate expects 2 arguments, 5 provided
In file included from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/cores/arduino/Arduino.h:115:0,
                 from /tmp/arduino-sketch-CC9B1EFC77787A92E8AD142725683CD1/sketch/AnalogWriteTest.ino.cpp:1:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/cores/arduino/overloads.h:27:6: note: candidate: void analogWrite(PinName, int)
 void analogWrite(PinName pinNumber, int value);
      ^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/cores/arduino/overloads.h:27:6: note:   candidate expects 2 arguments, 5 provided
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ESP32_ESP32S2_AnalogWrite/examples/AnalogWriteTest/AnalogWriteTest.ino:3:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ESP32_AnalogWrite/analogWrite.h:21:6: note: candidate: void analogWrite(uint8_t, uint32_t, uint32_t)
 void analogWrite(uint8_t pin, uint32_t value, uint32_t valueMax = 255);
      ^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ESP32_AnalogWrite/analogWrite.h:21:6: note:   candidate expects 3 arguments, 5 provided
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ESP32_ESP32S2_AnalogWrite/examples/AnalogWriteTest/AnalogWriteTest.ino:12:35: error: no matching function for call to 'analogWrite(int, int, int, int, int)'
   analogWrite(5, 341, 100, 10, 341);
                                   ^
In file included from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/variants/NANO_RP2040_CONNECT/pinmode_arduino.h:30:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/cores/arduino/Arduino.h:26,
                 from /tmp/arduino-sketch-CC9B1EFC77787A92E8AD142725683CD1/sketch/AnalogWriteTest.ino.cpp:1:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/cores/arduino/api/Common.h:100:6: note: candidate: void analogWrite(pin_size_t, int)
 void analogWrite(pin_size_t pinNumber, int value);
      ^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/cores/arduino/api/Common.h:100:6: note:   candidate expects 2 arguments, 5 provided
In file included from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/variants/NANO_RP2040_CONNECT/pins_arduino.h:127:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/cores/arduino/Arduino.h:76,
                 from /tmp/arduino-sketch-CC9B1EFC77787A92E8AD142725683CD1/sketch/AnalogWriteTest.ino.cpp:1:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/variants/NANO_RP2040_CONNECT/nina_pins.h:62:26: note: candidate: void analogWrite(NinaPin, int)
 void      NINA_ATTRIBUTE analogWrite (NinaPin pin, int value);
                          ^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/variants/NANO_RP2040_CONNECT/nina_pins.h:62:26: note:   candidate expects 2 arguments, 5 provided
In file included from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/cores/arduino/Arduino.h:115:0,
                 from /tmp/arduino-sketch-CC9B1EFC77787A92E8AD142725683CD1/sketch/AnalogWriteTest.ino.cpp:1:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/cores/arduino/overloads.h:27:6: note: candidate: void analogWrite(PinName, int)
 void analogWrite(PinName pinNumber, int value);
      ^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/cores/arduino/overloads.h:27:6: note:   candidate expects 2 arguments, 5 provided
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ESP32_ESP32S2_AnalogWrite/examples/AnalogWriteTest/AnalogWriteTest.ino:3:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ESP32_AnalogWrite/analogWrite.h:21:6: note: candidate: void analogWrite(uint8_t, uint32_t, uint32_t)
 void analogWrite(uint8_t pin, uint32_t value, uint32_t valueMax = 255);
      ^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ESP32_AnalogWrite/analogWrite.h:21:6: note:   candidate expects 3 arguments, 5 provided
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ESP32_ESP32S2_AnalogWrite/examples/AnalogWriteTest/AnalogWriteTest.ino:13:36: error: no matching function for call to 'analogWrite(int, int, int, int, int)'
   analogWrite(12, 341, 100, 10, 682);
                                    ^
In file included from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/variants/NANO_RP2040_CONNECT/pinmode_arduino.h:30:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/cores/arduino/Arduino.h:26,
                 from /tmp/arduino-sketch-CC9B1EFC77787A92E8AD142725683CD1/sketch/AnalogWriteTest.ino.cpp:1:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/cores/arduino/api/Common.h:100:6: note: candidate: void analogWrite(pin_size_t, int)
 void analogWrite(pin_size_t pinNumber, int value);
      ^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/cores/arduino/api/Common.h:100:6: note:   candidate expects 2 arguments, 5 provided
In file included from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/variants/NANO_RP2040_CONNECT/pins_arduino.h:127:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/cores/arduino/Arduino.h:76,
                 from /tmp/arduino-sketch-CC9B1EFC77787A92E8AD142725683CD1/sketch/AnalogWriteTest.ino.cpp:1:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/variants/NANO_RP2040_CONNECT/nina_pins.h:62:26: note: candidate: void analogWrite(NinaPin, int)
 void      NINA_ATTRIBUTE analogWrite (NinaPin pin, int value);
                          ^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/variants/NANO_RP2040_CONNECT/nina_pins.h:62:26: note:   candidate expects 2 arguments, 5 provided
In file included from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/cores/arduino/Arduino.h:115:0,
                 from /tmp/arduino-sketch-CC9B1EFC77787A92E8AD142725683CD1/sketch/AnalogWriteTest.ino.cpp:1:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/cores/arduino/overloads.h:27:6: note: candidate: void analogWrite(PinName, int)
 void analogWrite(PinName pinNumber, int value);
      ^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/cores/arduino/overloads.h:27:6: note:   candidate expects 2 arguments, 5 provided
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ESP32_ESP32S2_AnalogWrite/examples/AnalogWriteTest/AnalogWriteTest.ino:3:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ESP32_AnalogWrite/analogWrite.h:21:6: note: candidate: void analogWrite(uint8_t, uint32_t, uint32_t)
 void analogWrite(uint8_t pin, uint32_t value, uint32_t valueMax = 255);
      ^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ESP32_AnalogWrite/analogWrite.h:21:6: note:   candidate expects 3 arguments, 5 provided
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ESP32_ESP32S2_AnalogWrite/examples/AnalogWriteTest/AnalogWriteTest.ino:15:3: error: 'printPinsStatus' was not decl

examples/Fade

Result: FAIL 

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ESP32_AnalogWrite/analogWrite.cpp: In function 'int analogWriteChannel(uint8_t)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ESP32_AnalogWrite/analogWrite.cpp:44:9: error: 'ledcSetup' was not declared in this scope
         ledcSetup(channel, _analog_write_channels[i].frequency, _analog_write_channels[i].resolution);
         ^~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ESP32_AnalogWrite/analogWrite.cpp:45:9: error: 'ledcAttachPin' was not declared in this scope
         ledcAttachPin(pin, channel);
         ^~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ESP32_AnalogWrite/analogWrite.cpp: In function 'void analogWrite(uint8_t, uint32_t, uint32_t)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ESP32_AnalogWrite/analogWrite.cpp:104:5: error: 'ledcWrite' was not declared in this scope
     ledcWrite(channel, duty);
     ^~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ESP32_AnalogWrite/analogWrite.cpp:104:5: note: suggested alternative: 'bitWrite'
     ledcWrite(channel, duty);
     ^~~~~~~~~
     bitWrite
Multiple libraries were found for "analogWrite.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ESP32_AnalogWrite
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ESP32Servo
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ESP32_ESP32S2_AnalogWrite

arduino:megaavr:nona4809 @ 1.8.7

Inclusion

Result: FAIL
This library has no main header file so an empty one was created. 

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ESP32_AnalogWrite/analogWrite.cpp: In function 'int analogWriteChannel(uint8_t)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ESP32_AnalogWrite/analogWrite.cpp:44:9: error: 'ledcSetup' was not declared in this scope
         ledcSetup(channel, _analog_write_channels[i].frequency, _analog_write_channels[i].resolution);
         ^~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ESP32_AnalogWrite/analogWrite.cpp:45:9: error: 'ledcAttachPin' was not declared in this scope
         ledcAttachPin(pin, channel);
         ^~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ESP32_AnalogWrite/analogWrite.cpp: In function 'void analogWrite(uint8_t, uint32_t, uint32_t)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ESP32_AnalogWrite/analogWrite.cpp:104:5: error: 'ledcWrite' was not declared in this scope
     ledcWrite(channel, duty);
     ^~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ESP32_AnalogWrite/analogWrite.cpp:104:5: note: suggested alternative: 'bitWrite'
     ledcWrite(channel, duty);
     ^~~~~~~~~
     bitWrite
Multiple libraries were found for "analogWrite.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ESP32_AnalogWrite
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ESP32_ESP32S2_AnalogWrite
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ESP32Servo

examples/AnalogWriteTest

Result: FAIL 

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ESP32_ESP32S2_AnalogWrite/examples/AnalogWriteTest/AnalogWriteTest.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ESP32_ESP32S2_AnalogWrite/examples/AnalogWriteTest/AnalogWriteTest.ino:11:33: error: no matching function for call to 'analogWrite(int, int, int, int, int)'
   analogWrite(4, 341, 100, 10, 0);
                                 ^
In file included from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/cores/arduino/api/Interrupts.h:8:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/cores/arduino/api/ArduinoAPI.h:29,
                 from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/cores/arduino/Arduino.h:23,
                 from /tmp/arduino-sketch-CC9B1EFC77787A92E8AD142725683CD1/sketch/AnalogWriteTest.ino.cpp:1:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/cores/arduino/api/Common.h:99:6: note: candidate: void analogWrite(pin_size_t, int)
 void analogWrite(pin_size_t pinNumber, int value);
      ^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/cores/arduino/api/Common.h:99:6: note:   candidate expects 2 arguments, 5 provided
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ESP32_ESP32S2_AnalogWrite/examples/AnalogWriteTest/AnalogWriteTest.ino:3:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ESP32_AnalogWrite/analogWrite.h:21:6: note: candidate: void analogWrite(uint8_t, uint32_t, uint32_t)
 void analogWrite(uint8_t pin, uint32_t value, uint32_t valueMax = 255);
      ^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ESP32_AnalogWrite/analogWrite.h:21:6: note:   candidate expects 3 arguments, 5 provided
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ESP32_ESP32S2_AnalogWrite/examples/AnalogWriteTest/AnalogWriteTest.ino:12:35: error: no matching function for call to 'analogWrite(int, int, int, int, int)'
   analogWrite(5, 341, 100, 10, 341);
                                   ^
In file included from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/cores/arduino/api/Interrupts.h:8:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/cores/arduino/api/ArduinoAPI.h:29,
                 from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/cores/arduino/Arduino.h:23,
                 from /tmp/arduino-sketch-CC9B1EFC77787A92E8AD142725683CD1/sketch/AnalogWriteTest.ino.cpp:1:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/cores/arduino/api/Common.h:99:6: note: candidate: void analogWrite(pin_size_t, int)
 void analogWrite(pin_size_t pinNumber, int value);
      ^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/cores/arduino/api/Common.h:99:6: note:   candidate expects 2 arguments, 5 provided
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ESP32_ESP32S2_AnalogWrite/examples/AnalogWriteTest/AnalogWriteTest.ino:3:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ESP32_AnalogWrite/analogWrite.h:21:6: note: candidate: void analogWrite(uint8_t, uint32_t, uint32_t)
 void analogWrite(uint8_t pin, uint32_t value, uint32_t valueMax = 255);
      ^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ESP32_AnalogWrite/analogWrite.h:21:6: note:   candidate expects 3 arguments, 5 provided
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ESP32_ESP32S2_AnalogWrite/examples/AnalogWriteTest/AnalogWriteTest.ino:13:36: error: no matching function for call to 'analogWrite(int, int, int, int, int)'
   analogWrite(12, 341, 100, 10, 682);
                                    ^
In file included from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/cores/arduino/api/Interrupts.h:8:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/cores/arduino/api/ArduinoAPI.h:29,
                 from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/cores/arduino/Arduino.h:23,
                 from /tmp/arduino-sketch-CC9B1EFC77787A92E8AD142725683CD1/sketch/AnalogWriteTest.ino.cpp:1:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/cores/arduino/api/Common.h:99:6: note: candidate: void analogWrite(pin_size_t, int)
 void analogWrite(pin_size_t pinNumber, int value);
      ^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/cores/arduino/api/Common.h:99:6: note:   candidate expects 2 arguments, 5 provided
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ESP32_ESP32S2_AnalogWrite/examples/AnalogWriteTest/AnalogWriteTest.ino:3:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ESP32_AnalogWrite/analogWrite.h:21:6: note: candidate: void analogWrite(uint8_t, uint32_t, uint32_t)
 void analogWrite(uint8_t pin, uint32_t value, uint32_t valueMax = 255);
      ^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ESP32_AnalogWrite/analogWrite.h:21:6: note:   candidate expects 3 arguments, 5 provided
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ESP32_ESP32S2_AnalogWrite/examples/AnalogWriteTest/AnalogWriteTest.ino:15:3: error: 'printPinsStatus' was not declared in this scope
   printPinsStatus();
   ^~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ESP32_ESP32S2_AnalogWrite/examples/AnalogWriteTest/AnalogWriteTest.ino:15:3: note: suggested alternative: 'PinStatus'
   printPinsStatus();
   ^~~~~~~~~~~~~~~
   PinStatus
Multiple libraries were found for "analogWrite.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ESP32_AnalogWrite
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ESP32Servo
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ESP32_ESP32S2_AnalogWrite

examples/Fade

Result: FAIL 

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ESP32_AnalogWrite/analogWrite.cpp: In function 'int analogWriteChannel(uint8_t)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ESP32_AnalogWrite/analogWrite.cpp:44:9: error: 'ledcSetup' was not declared in this scope
         ledcSetup(channel, _analog_write_channels[i].frequency, _analog_write_channels[i].resolution);
         ^~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ESP32_AnalogWrite/analogWrite.cpp:45:9: error: 'ledcAttachPin' was not declared in this scope
         ledcAttachPin(pin, channel);
         ^~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ESP32_AnalogWrite/analogWrite.cpp: In function 'void analogWrite(uint8_t, uint32_t, uint32_t)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ESP32_AnalogWrite/analogWrite.cpp:104:5: error: 'ledcWrite' was not declared in this scope
     ledcWrite(channel, duty);
     ^~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ESP32_AnalogWrite/analogWrite.cpp:104:5: note: suggested alternative: 'bitWrite'
     ledcWrite(channel, duty);
     ^~~~~~~~~
     bitWrite
Multiple libraries were found for "analogWrite.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ESP32_AnalogWrite
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ESP32_ESP32S2_AnalogWrite
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ESP32Servo

arduino:samd:mkrwifi1010 @ 1.8.12

Inclusion

Result: FAIL
This library has no main header file so an empty one was created. 

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ESP32_AnalogWrite/analogWrite.cpp: In function 'int analogWriteChannel(uint8_t)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ESP32_AnalogWrite/analogWrite.cpp:44:9: error: 'ledcSetup' was not declared in this scope
         ledcSetup(channel, _analog_write_channels[i].frequency, _analog_write_channels[i].resolution);
         ^~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ESP32_AnalogWrite/analogWrite.cpp:45:9: error: 'ledcAttachPin' was not declared in this scope
         ledcAttachPin(pin, channel);
         ^~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ESP32_AnalogWrite/analogWrite.cpp: In function 'void analogWrite(uint8_t, uint32_t, uint32_t)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ESP32_AnalogWrite/analogWrite.cpp:104:5: error: 'ledcWrite' was not declared in this scope
     ledcWrite(channel, duty);
     ^~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ESP32_AnalogWrite/analogWrite.cpp:104:5: note: suggested alternative: 'bitWrite'
     ledcWrite(channel, duty);
     ^~~~~~~~~
     bitWrite
Multiple libraries were found for "analogWrite.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ESP32_AnalogWrite
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ESP32_ESP32S2_AnalogWrite
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ESP32Servo

examples/AnalogWriteTest

Result: FAIL 

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ESP32_ESP32S2_AnalogWrite/examples/AnalogWriteTest/AnalogWriteTest.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ESP32_ESP32S2_AnalogWrite/examples/AnalogWriteTest/AnalogWriteTest.ino:11:33: error: no matching function for call to 'analogWrite(int, int, int, int, int)'
   analogWrite(4, 341, 100, 10, 0);
                                 ^
In file included from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/cores/arduino/api/Interrupts.h:8:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/cores/arduino/api/ArduinoAPI.h:29,
                 from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/cores/arduino/Arduino.h:23,
                 from /tmp/arduino-sketch-CC9B1EFC77787A92E8AD142725683CD1/sketch/AnalogWriteTest.ino.cpp:1:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/cores/arduino/api/Common.h:99:6: note: candidate: void analogWrite(pin_size_t, int)
 void analogWrite(pin_size_t pinNumber, int value);
      ^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/cores/arduino/api/Common.h:99:6: note:   candidate expects 2 arguments, 5 provided
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ESP32_ESP32S2_AnalogWrite/examples/AnalogWriteTest/AnalogWriteTest.ino:3:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ESP32_AnalogWrite/analogWrite.h:21:6: note: candidate: void analogWrite(uint8_t, uint32_t, uint32_t)
 void analogWrite(uint8_t pin, uint32_t value, uint32_t valueMax = 255);
      ^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ESP32_AnalogWrite/analogWrite.h:21:6: note:   candidate expects 3 arguments, 5 provided
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ESP32_ESP32S2_AnalogWrite/examples/AnalogWriteTest/AnalogWriteTest.ino:12:35: error: no matching function for call to 'analogWrite(int, int, int, int, int)'
   analogWrite(5, 341, 100, 10, 341);
                                   ^
In file included from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/cores/arduino/api/Interrupts.h:8:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/cores/arduino/api/ArduinoAPI.h:29,
                 from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/cores/arduino/Arduino.h:23,
                 from /tmp/arduino-sketch-CC9B1EFC77787A92E8AD142725683CD1/sketch/AnalogWriteTest.ino.cpp:1:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/cores/arduino/api/Common.h:99:6: note: candidate: void analogWrite(pin_size_t, int)
 void analogWrite(pin_size_t pinNumber, int value);
      ^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/cores/arduino/api/Common.h:99:6: note:   candidate expects 2 arguments, 5 provided
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ESP32_ESP32S2_AnalogWrite/examples/AnalogWriteTest/AnalogWriteTest.ino:3:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ESP32_AnalogWrite/analogWrite.h:21:6: note: candidate: void analogWrite(uint8_t, uint32_t, uint32_t)
 void analogWrite(uint8_t pin, uint32_t value, uint32_t valueMax = 255);
      ^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ESP32_AnalogWrite/analogWrite.h:21:6: note:   candidate expects 3 arguments, 5 provided
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ESP32_ESP32S2_AnalogWrite/examples/AnalogWriteTest/AnalogWriteTest.ino:13:36: error: no matching function for call to 'analogWrite(int, int, int, int, int)'
   analogWrite(12, 341, 100, 10, 682);
                                    ^
In file included from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/cores/arduino/api/Interrupts.h:8:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/cores/arduino/api/ArduinoAPI.h:29,
                 from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/cores/arduino/Arduino.h:23,
                 from /tmp/arduino-sketch-CC9B1EFC77787A92E8AD142725683CD1/sketch/AnalogWriteTest.ino.cpp:1:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/cores/arduino/api/Common.h:99:6: note: candidate: void analogWrite(pin_size_t, int)
 void analogWrite(pin_size_t pinNumber, int value);
      ^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/cores/arduino/api/Common.h:99:6: note:   candidate expects 2 arguments, 5 provided
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ESP32_ESP32S2_AnalogWrite/examples/AnalogWriteTest/AnalogWriteTest.ino:3:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ESP32_AnalogWrite/analogWrite.h:21:6: note: candidate: void analogWrite(uint8_t, uint32_t, uint32_t)
 void analogWrite(uint8_t pin, uint32_t value, uint32_t valueMax = 255);
      ^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ESP32_AnalogWrite/analogWrite.h:21:6: note:   candidate expects 3 arguments, 5 provided
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ESP32_ESP32S2_AnalogWrite/examples/AnalogWriteTest/AnalogWriteTest.ino:15:3: error: 'printPinsStatus' was not declared in this scope
   printPinsStatus();
   ^~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ESP32_ESP32S2_AnalogWrite/examples/AnalogWriteTest/AnalogWriteTest.ino:15:3: note: suggested alternative: 'PinStatus'
   printPinsStatus();
   ^~~~~~~~~~~~~~~
   PinStatus
Multiple libraries were found for "analogWrite.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ESP32_AnalogWrite
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ESP32_ESP32S2_AnalogWrite
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ESP32Servo

examples/Fade

Result: FAIL 

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ESP32_AnalogWrite/analogWrite.cpp: In function 'int analogWriteChannel(uint8_t)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ESP32_AnalogWrite/analogWrite.cpp:44:9: error: 'ledcSetup' was not declared in this scope
         ledcSetup(channel, _analog_write_channels[i].frequency, _analog_write_channels[i].resolution);
         ^~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ESP32_AnalogWrite/analogWrite.cpp:45:9: error: 'ledcAttachPin' was not declared in this scope
         ledcAttachPin(pin, channel);
         ^~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ESP32_AnalogWrite/analogWrite.cpp: In function 'void analogWrite(uint8_t, uint32_t, uint32_t)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ESP32_AnalogWrite/analogWrite.cpp:104:5: error: 'ledcWrite' was not declared in this scope
     ledcWrite(channel, duty);
     ^~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ESP32_AnalogWrite/analogWrite.cpp:104:5: note: suggested alternative: 'bitWrite'
     ledcWrite(channel, duty);
     ^~~~~~~~~
     bitWrite
Multiple libraries were found for "analogWrite.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ESP32_AnalogWrite
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ESP32_ESP32S2_AnalogWrite
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ESP32Servo

esp32:esp32:d1_mini32 @ 1.0.6

Inclusion

Result: PASS
This library has no main header file so an empty one was created. 

Sketch uses 200534 bytes (15%) of program storage space. Maximum is 1310720 bytes.
Global variables use 13192 bytes (4%) of dynamic memory, leaving 314488 bytes for local variables. Maximum is 327680 bytes.

examples/AnalogWriteTest

Result: PASS 

Sketch uses 217838 bytes (16%) of program storage space. Maximum is 1310720 bytes.
Global variables use 13672 bytes (4%) of dynamic memory, leaving 314008 bytes for local variables. Maximum is 327680 bytes.

examples/Fade

Result: PASS 

Sketch uses 208150 bytes (15%) of program storage space. Maximum is 1310720 bytes.
Global variables use 13592 bytes (4%) of dynamic memory, leaving 314088 bytes for local variables. Maximum is 327680 bytes.