ESPSerialFlasher - compatibility matrix

This report was generated on Wednesday, 23-Feb-22 22:48:15 CET using arduino-testlib.

ESPSerialFlasher

Version: 0.1.7
More details

Compatibility matrix

Board Claims compatibility Inclusion 
FlashRootCertsNoSDCard
 
DownloadLatestFW
 
EspFlasher
 
FlashRootCerts
arduino:avr:uno
1.8.4 		No FAIL FAIL FAIL FAIL FAIL
arduino:mbed_nano:nanorp2040connect
2.7.2 		No ⚠️ PASS PASS PASS PASS PASS
arduino:megaavr:nona4809
1.8.7 		No FAIL FAIL FAIL FAIL FAIL
arduino:samd:mkrwifi1010
1.8.12 		Yes PASS PASS PASS PASS PASS
esp32:esp32:d1_mini32
1.0.6 		No FAIL FAIL FAIL FAIL FAIL

Compilation logs

arduino:avr:uno @ 1.8.4

Inclusion

Result: FAIL 

WARNING: library ESPSerialFlasher claims to run on samd architecture(s) and may be incompatible with your current board which runs on avr architecture(s).
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ESPSerialFlasher/src/ESPSerialFlasher.cpp: In function 'void ESPFlasherInit(bool, Print*)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ESPSerialFlasher/src/ESPSerialFlasher.cpp:14:1: error: 'SerialNina' was not declared in this scope
 SerialNina.begin(115200);
 ^~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ESPSerialFlasher/src/ESPSerialFlasher.cpp:14:1: note: suggested alternative: 'Serial'
 SerialNina.begin(115200);
 ^~~~~~~~~~
 Serial
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ESPSerialFlasher/src/ESPSerialFlasher.cpp:15:9: error: 'NINA_RESETN' was not declared in this scope
 pinMode(NINA_RESETN, OUTPUT);
         ^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ESPSerialFlasher/src/ESPSerialFlasher.cpp:16:9: error: 'NINA_GPIO0' was not declared in this scope
 pinMode(NINA_GPIO0, OUTPUT);
         ^~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ESPSerialFlasher/src/ESPSerialFlasher.cpp: In function 'esp_loader_error_t loader_port_serial_write(const uint8_t*, uint16_t, uint32_t)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ESPSerialFlasher/src/ESPSerialFlasher.cpp:79:17: error: 'SerialNina' was not declared in this scope
    size_t err = SerialNina.write((const char *)data, size);
                 ^~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ESPSerialFlasher/src/ESPSerialFlasher.cpp:79:17: note: suggested alternative: 'Serial'
    size_t err = SerialNina.write((const char *)data, size);
                 ^~~~~~~~~~
                 Serial
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ESPSerialFlasher/src/ESPSerialFlasher.cpp: In function 'esp_loader_error_t loader_port_serial_read(uint8_t*, uint16_t, uint32_t)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ESPSerialFlasher/src/ESPSerialFlasher.cpp:91:2: error: 'SerialNina' was not declared in this scope
  SerialNina.setTimeout(timeout);
  ^~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ESPSerialFlasher/src/ESPSerialFlasher.cpp:91:2: note: suggested alternative: 'Serial'
  SerialNina.setTimeout(timeout);
  ^~~~~~~~~~
  Serial
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ESPSerialFlasher/src/ESPSerialFlasher.cpp: In function 'void loader_port_enter_bootloader()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ESPSerialFlasher/src/ESPSerialFlasher.cpp:108:18: error: 'NINA_GPIO0' was not declared in this scope
     digitalWrite(NINA_GPIO0, 0);
                  ^~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ESPSerialFlasher/src/ESPSerialFlasher.cpp: In function 'void loader_port_reset_target()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ESPSerialFlasher/src/ESPSerialFlasher.cpp:117:18: error: 'NINA_RESETN' was not declared in this scope
     digitalWrite(NINA_RESETN, 0);
                  ^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ESPSerialFlasher/src/ESPSerialFlasher.cpp: In function 'esp_loader_error_t loader_port_change_baudrate(uint32_t)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ESPSerialFlasher/src/ESPSerialFlasher.cpp:149:5: error: 'SerialNina' was not declared in this scope
     SerialNina.begin(baudrate);
     ^~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ESPSerialFlasher/src/ESPSerialFlasher.cpp:149:5: note: suggested alternative: 'Serial'
     SerialNina.begin(baudrate);
     ^~~~~~~~~~
     Serial

examples/DownloadLatestFW

Result: FAIL 

WARNING: library ESPSerialFlasher claims to run on samd architecture(s) and may be incompatible with your current board which runs on avr architecture(s).
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/WiFiNINA/src/WiFiStorage.h:23:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/WiFiNINA/src/WiFi.h:38,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/WiFiNINA/src/WiFiNINA.h:23,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ESPSerialFlasher/examples/DownloadLatestFW/wifi_functions.h:5,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ESPSerialFlasher/examples/DownloadLatestFW/DownloadLatestFW.ino:7:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/WiFiNINA/src/utility/wifi_drv.h:293:12: error: 'PinStatus' does not name a type
     static PinStatus digitalRead(uint8_t pin);
            ^~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ESPSerialFlasher/examples/DownloadLatestFW/DownloadLatestFW.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ESPSerialFlasher/examples/DownloadLatestFW/DownloadLatestFW.ino:39:2: error: 'Serial1' was not declared in this scope
  Serial1.begin(115200);
  ^~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ESPSerialFlasher/examples/DownloadLatestFW/DownloadLatestFW.ino:39:2: note: suggested alternative: 'Serial'
  Serial1.begin(115200);
  ^~~~~~~
  Serial

examples/EspFlasher

Result: FAIL 

WARNING: library ESPSerialFlasher claims to run on samd architecture(s) and may be incompatible with your current board which runs on avr architecture(s).
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ESPSerialFlasher/src/ESPSerialFlasher.cpp: In function 'void ESPFlasherInit(bool, Print*)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ESPSerialFlasher/src/ESPSerialFlasher.cpp:14:1: error: 'SerialNina' was not declared in this scope
 SerialNina.begin(115200);
 ^~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ESPSerialFlasher/src/ESPSerialFlasher.cpp:14:1: note: suggested alternative: 'Serial'
 SerialNina.begin(115200);
 ^~~~~~~~~~
 Serial
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ESPSerialFlasher/src/ESPSerialFlasher.cpp:15:9: error: 'NINA_RESETN' was not declared in this scope
 pinMode(NINA_RESETN, OUTPUT);
         ^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ESPSerialFlasher/src/ESPSerialFlasher.cpp:16:9: error: 'NINA_GPIO0' was not declared in this scope
 pinMode(NINA_GPIO0, OUTPUT);
         ^~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ESPSerialFlasher/src/ESPSerialFlasher.cpp: In function 'esp_loader_error_t loader_port_serial_write(const uint8_t*, uint16_t, uint32_t)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ESPSerialFlasher/src/ESPSerialFlasher.cpp:79:17: error: 'SerialNina' was not declared in this scope
    size_t err = SerialNina.write((const char *)data, size);
                 ^~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ESPSerialFlasher/src/ESPSerialFlasher.cpp:79:17: note: suggested alternative: 'Serial'
    size_t err = SerialNina.write((const char *)data, size);
                 ^~~~~~~~~~
                 Serial
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ESPSerialFlasher/src/ESPSerialFlasher.cpp: In function 'esp_loader_error_t loader_port_serial_read(uint8_t*, uint16_t, uint32_t)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ESPSerialFlasher/src/ESPSerialFlasher.cpp:91:2: error: 'SerialNina' was not declared in this scope
  SerialNina.setTimeout(timeout);
  ^~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ESPSerialFlasher/src/ESPSerialFlasher.cpp:91:2: note: suggested alternative: 'Serial'
  SerialNina.setTimeout(timeout);
  ^~~~~~~~~~
  Serial
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ESPSerialFlasher/src/ESPSerialFlasher.cpp: In function 'void loader_port_enter_bootloader()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ESPSerialFlasher/src/ESPSerialFlasher.cpp:108:18: error: 'NINA_GPIO0' was not declared in this scope
     digitalWrite(NINA_GPIO0, 0);
                  ^~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ESPSerialFlasher/src/ESPSerialFlasher.cpp: In function 'void loader_port_reset_target()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ESPSerialFlasher/src/ESPSerialFlasher.cpp:117:18: error: 'NINA_RESETN' was not declared in this scope
     digitalWrite(NINA_RESETN, 0);
                  ^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ESPSerialFlasher/src/ESPSerialFlasher.cpp: In function 'esp_loader_error_t loader_port_change_baudrate(uint32_t)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ESPSerialFlasher/src/ESPSerialFlasher.cpp:149:5: error: 'SerialNina' was not declared in this scope
     SerialNina.begin(baudrate);
     ^~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ESPSerialFlasher/src/ESPSerialFlasher.cpp:149:5: note: suggested alternative: 'Serial'
     SerialNina.begin(baudrate);
     ^~~~~~~~~~
     Serial

examples/FlashRootCerts

Result: FAIL 

WARNING: library ESPSerialFlasher claims to run on samd architecture(s) and may be incompatible with your current board which runs on avr architecture(s).
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ESPSerialFlasher/src/ESPSerialFlasher.cpp: In function 'void ESPFlasherInit(bool, Print*)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ESPSerialFlasher/src/ESPSerialFlasher.cpp:14:1: error: 'SerialNina' was not declared in this scope
 SerialNina.begin(115200);
 ^~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ESPSerialFlasher/src/ESPSerialFlasher.cpp:14:1: note: suggested alternative: 'Serial'
 SerialNina.begin(115200);
 ^~~~~~~~~~
 Serial
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ESPSerialFlasher/src/ESPSerialFlasher.cpp:15:9: error: 'NINA_RESETN' was not declared in this scope
 pinMode(NINA_RESETN, OUTPUT);
         ^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ESPSerialFlasher/src/ESPSerialFlasher.cpp:16:9: error: 'NINA_GPIO0' was not declared in this scope
 pinMode(NINA_GPIO0, OUTPUT);
         ^~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ESPSerialFlasher/src/ESPSerialFlasher.cpp: In function 'esp_loader_error_t loader_port_serial_write(const uint8_t*, uint16_t, uint32_t)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ESPSerialFlasher/src/ESPSerialFlasher.cpp:79:17: error: 'SerialNina' was not declared in this scope
    size_t err = SerialNina.write((const char *)data, size);
                 ^~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ESPSerialFlasher/src/ESPSerialFlasher.cpp:79:17: note: suggested alternative: 'Serial'
    size_t err = SerialNina.write((const char *)data, size);
                 ^~~~~~~~~~
                 Serial
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ESPSerialFlasher/src/ESPSerialFlasher.cpp: In function 'esp_loader_error_t loader_port_serial_read(uint8_t*, uint16_t, uint32_t)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ESPSerialFlasher/src/ESPSerialFlasher.cpp:91:2: error: 'SerialNina' was not declared in this scope
  SerialNina.setTimeout(timeout);
  ^~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ESPSerialFlasher/src/ESPSerialFlasher.cpp:91:2: note: suggested alternative: 'Serial'
  SerialNina.setTimeout(timeout);
  ^~~~~~~~~~
  Serial
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ESPSerialFlasher/src/ESPSerialFlasher.cpp: In function 'void loader_port_enter_bootloader()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ESPSerialFlasher/src/ESPSerialFlasher.cpp:108:18: error: 'NINA_GPIO0' was not declared in this scope
     digitalWrite(NINA_GPIO0, 0);
                  ^~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ESPSerialFlasher/src/ESPSerialFlasher.cpp: In function 'void loader_port_reset_target()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ESPSerialFlasher/src/ESPSerialFlasher.cpp:117:18: error: 'NINA_RESETN' was not declared in this scope
     digitalWrite(NINA_RESETN, 0);
                  ^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ESPSerialFlasher/src/ESPSerialFlasher.cpp: In function 'esp_loader_error_t loader_port_change_baudrate(uint32_t)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ESPSerialFlasher/src/ESPSerialFlasher.cpp:149:5: error: 'SerialNina' was not declared in this scope
     SerialNina.begin(baudrate);
     ^~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ESPSerialFlasher/src/ESPSerialFlasher.cpp:149:5: note: suggested alternative: 'Serial'
     SerialNina.begin(baudrate);
     ^~~~~~~~~~
     Serial

examples/FlashRootCertsNoSDCard

Result: FAIL 

WARNING: library ESPSerialFlasher claims to run on samd architecture(s) and may be incompatible with your current board which runs on avr architecture(s).
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ESPSerialFlasher/src/ESPSerialFlasher.cpp: In function 'void ESPFlasherInit(bool, Print*)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ESPSerialFlasher/src/ESPSerialFlasher.cpp:14:1: error: 'SerialNina' was not declared in this scope
 SerialNina.begin(115200);
 ^~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ESPSerialFlasher/src/ESPSerialFlasher.cpp:14:1: note: suggested alternative: 'Serial'
 SerialNina.begin(115200);
 ^~~~~~~~~~
 Serial
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ESPSerialFlasher/src/ESPSerialFlasher.cpp:15:9: error: 'NINA_RESETN' was not declared in this scope
 pinMode(NINA_RESETN, OUTPUT);
         ^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ESPSerialFlasher/src/ESPSerialFlasher.cpp:16:9: error: 'NINA_GPIO0' was not declared in this scope
 pinMode(NINA_GPIO0, OUTPUT);
         ^~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ESPSerialFlasher/src/ESPSerialFlasher.cpp: In function 'esp_loader_error_t loader_port_serial_write(const uint8_t*, uint16_t, uint32_t)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ESPSerialFlasher/src/ESPSerialFlasher.cpp:79:17: error: 'SerialNina' was not declared in this scope
    size_t err = SerialNina.write((const char *)data, size);
                 ^~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ESPSerialFlasher/src/ESPSerialFlasher.cpp:79:17: note: suggested alternative: 'Serial'
    size_t err = SerialNina.write((const char *)data, size);
                 ^~~~~~~~~~
                 Serial
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ESPSerialFlasher/src/ESPSerialFlasher.cpp: In function 'esp_loader_error_t loader_port_serial_read(uint8_t*, uint16_t, uint32_t)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ESPSerialFlasher/src/ESPSerialFlasher.cpp:91:2: error: 'SerialNina' was not declared in this scope
  SerialNina.setTimeout(timeout);
  ^~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ESPSerialFlasher/src/ESPSerialFlasher.cpp:91:2: note: suggested alternative: 'Serial'
  SerialNina.setTimeout(timeout);
  ^~~~~~~~~~
  Serial
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ESPSerialFlasher/src/ESPSerialFlasher.cpp: In function 'void loader_port_enter_bootloader()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ESPSerialFlasher/src/ESPSerialFlasher.cpp:108:18: error: 'NINA_GPIO0' was not declared in this scope
     digitalWrite(NINA_GPIO0, 0);
                  ^~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ESPSerialFlasher/src/ESPSerialFlasher.cpp: In function 'void loader_port_reset_target()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ESPSerialFlasher/src/ESPSerialFlasher.cpp:117:18: error: 'NINA_RESETN' was not declared in this scope
     digitalWrite(NINA_RESETN, 0);
                  ^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ESPSerialFlasher/src/ESPSerialFlasher.cpp: In function 'esp_loader_error_t loader_port_change_baudrate(uint32_t)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ESPSerialFlasher/src/ESPSerialFlasher.cpp:149:5: error: 'SerialNina' was not declared in this scope
     SerialNina.begin(baudrate);
     ^~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ESPSerialFlasher/src/ESPSerialFlasher.cpp:149:5: note: suggested alternative: 'Serial'
     SerialNina.begin(baudrate);
     ^~~~~~~~~~
     Serial

arduino:mbed_nano:nanorp2040connect @ 2.7.2

Inclusion

Result: PASS 

WARNING: library ESPSerialFlasher claims to run on samd architecture(s) and may be incompatible with your current board which runs on mbed_nano architecture(s).
Sketch uses 83270 bytes (0%) of program storage space. Maximum is 16777216 bytes.
Global variables use 44256 bytes (16%) of dynamic memory, leaving 226080 bytes for local variables. Maximum is 270336 bytes.

examples/DownloadLatestFW

Result: PASS 

WARNING: library ESPSerialFlasher claims to run on samd architecture(s) and may be incompatible with your current board which runs on mbed_nano architecture(s).
Sketch uses 102536 bytes (0%) of program storage space. Maximum is 16777216 bytes.
Global variables use 44716 bytes (16%) of dynamic memory, leaving 225620 bytes for local variables. Maximum is 270336 bytes.

examples/EspFlasher

Result: PASS 

WARNING: library ESPSerialFlasher claims to run on samd architecture(s) and may be incompatible with your current board which runs on mbed_nano architecture(s).
Sketch uses 91924 bytes (0%) of program storage space. Maximum is 16777216 bytes.
Global variables use 44272 bytes (16%) of dynamic memory, leaving 226064 bytes for local variables. Maximum is 270336 bytes.

examples/FlashRootCerts

Result: PASS 

WARNING: library ESPSerialFlasher claims to run on samd architecture(s) and may be incompatible with your current board which runs on mbed_nano architecture(s).
Sketch uses 91924 bytes (0%) of program storage space. Maximum is 16777216 bytes.
Global variables use 44272 bytes (16%) of dynamic memory, leaving 226064 bytes for local variables. Maximum is 270336 bytes.

examples/FlashRootCertsNoSDCard

Result: PASS 

WARNING: library ESPSerialFlasher claims to run on samd architecture(s) and may be incompatible with your current board which runs on mbed_nano architecture(s).
Sketch uses 88120 bytes (0%) of program storage space. Maximum is 16777216 bytes.
Global variables use 44272 bytes (16%) of dynamic memory, leaving 226064 bytes for local variables. Maximum is 270336 bytes.

arduino:megaavr:nona4809 @ 1.8.7

Inclusion

Result: FAIL 

WARNING: library ESPSerialFlasher claims to run on samd architecture(s) and may be incompatible with your current board which runs on megaavr architecture(s).
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ESPSerialFlasher/src/ESPSerialFlasher.cpp: In function 'void ESPFlasherInit(bool, arduino::Print*)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ESPSerialFlasher/src/ESPSerialFlasher.cpp:14:1: error: 'SerialNina' was not declared in this scope
 SerialNina.begin(115200);
 ^~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ESPSerialFlasher/src/ESPSerialFlasher.cpp:14:1: note: suggested alternative: 'Serial1'
 SerialNina.begin(115200);
 ^~~~~~~~~~
 Serial1
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ESPSerialFlasher/src/ESPSerialFlasher.cpp:15:9: error: 'NINA_RESETN' was not declared in this scope
 pinMode(NINA_RESETN, OUTPUT);
         ^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ESPSerialFlasher/src/ESPSerialFlasher.cpp:15:9: note: suggested alternative: 'MSC_RESET'
 pinMode(NINA_RESETN, OUTPUT);
         ^~~~~~~~~~~
         MSC_RESET
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ESPSerialFlasher/src/ESPSerialFlasher.cpp:16:9: error: 'NINA_GPIO0' was not declared in this scope
 pinMode(NINA_GPIO0, OUTPUT);
         ^~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ESPSerialFlasher/src/ESPSerialFlasher.cpp:16:9: note: suggested alternative: 'GPIO_GPIO0'
 pinMode(NINA_GPIO0, OUTPUT);
         ^~~~~~~~~~
         GPIO_GPIO0
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ESPSerialFlasher/src/ESPSerialFlasher.cpp: In function 'esp_loader_error_t loader_port_serial_write(const uint8_t*, uint16_t, uint32_t)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ESPSerialFlasher/src/ESPSerialFlasher.cpp:79:17: error: 'SerialNina' was not declared in this scope
    size_t err = SerialNina.write((const char *)data, size);
                 ^~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ESPSerialFlasher/src/ESPSerialFlasher.cpp:79:17: note: suggested alternative: 'Serial1'
    size_t err = SerialNina.write((const char *)data, size);
                 ^~~~~~~~~~
                 Serial1
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ESPSerialFlasher/src/ESPSerialFlasher.cpp: In function 'esp_loader_error_t loader_port_serial_read(uint8_t*, uint16_t, uint32_t)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ESPSerialFlasher/src/ESPSerialFlasher.cpp:91:2: error: 'SerialNina' was not declared in this scope
  SerialNina.setTimeout(timeout);
  ^~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ESPSerialFlasher/src/ESPSerialFlasher.cpp:91:2: note: suggested alternative: 'Serial1'
  SerialNina.setTimeout(timeout);
  ^~~~~~~~~~
  Serial1
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ESPSerialFlasher/src/ESPSerialFlasher.cpp: In function 'void loader_port_enter_bootloader()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ESPSerialFlasher/src/ESPSerialFlasher.cpp:108:18: error: 'NINA_GPIO0' was not declared in this scope
     digitalWrite(NINA_GPIO0, 0);
                  ^~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ESPSerialFlasher/src/ESPSerialFlasher.cpp:108:18: note: suggested alternative: 'GPIO_GPIO0'
     digitalWrite(NINA_GPIO0, 0);
                  ^~~~~~~~~~
                  GPIO_GPIO0
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ESPSerialFlasher/src/ESPSerialFlasher.cpp: In function 'void loader_port_reset_target()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ESPSerialFlasher/src/ESPSerialFlasher.cpp:117:18: error: 'NINA_RESETN' was not declared in this scope
     digitalWrite(NINA_RESETN, 0);
                  ^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ESPSerialFlasher/src/ESPSerialFlasher.cpp:117:18: note: suggested alternative: 'MSC_RESET'
     digitalWrite(NINA_RESETN, 0);
                  ^~~~~~~~~~~
                  MSC_RESET
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ESPSerialFlasher/src/ESPSerialFlasher.cpp: In function 'esp_loader_error_t loader_port_change_baudrate(uint32_t)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ESPSerialFlasher/src/ESPSerialFlasher.cpp:149:5: error: 'SerialNina' was not declared in this scope
     SerialNina.begin(baudrate);
     ^~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ESPSerialFlasher/src/ESPSerialFlasher.cpp:149:5: note: suggested alternative: 'Serial1'
     SerialNina.begin(baudrate);
     ^~~~~~~~~~
     Serial1

examples/DownloadLatestFW

Result: FAIL 

WARNING: library ESPSerialFlasher claims to run on samd architecture(s) and may be incompatible with your current board which runs on megaavr architecture(s).
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ESPSerialFlasher/src/ESPSerialFlasher.cpp: In function 'void ESPFlasherInit(bool, arduino::Print*)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ESPSerialFlasher/src/ESPSerialFlasher.cpp:14:1: error: 'SerialNina' was not declared in this scope
 SerialNina.begin(115200);
 ^~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ESPSerialFlasher/src/ESPSerialFlasher.cpp:14:1: note: suggested alternative: 'Serial1'
 SerialNina.begin(115200);
 ^~~~~~~~~~
 Serial1
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ESPSerialFlasher/src/ESPSerialFlasher.cpp:15:9: error: 'NINA_RESETN' was not declared in this scope
 pinMode(NINA_RESETN, OUTPUT);
         ^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ESPSerialFlasher/src/ESPSerialFlasher.cpp:15:9: note: suggested alternative: 'MSC_RESET'
 pinMode(NINA_RESETN, OUTPUT);
         ^~~~~~~~~~~
         MSC_RESET
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ESPSerialFlasher/src/ESPSerialFlasher.cpp:16:9: error: 'NINA_GPIO0' was not declared in this scope
 pinMode(NINA_GPIO0, OUTPUT);
         ^~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ESPSerialFlasher/src/ESPSerialFlasher.cpp:16:9: note: suggested alternative: 'GPIO_GPIO0'
 pinMode(NINA_GPIO0, OUTPUT);
         ^~~~~~~~~~
         GPIO_GPIO0
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ESPSerialFlasher/src/ESPSerialFlasher.cpp: In function 'esp_loader_error_t loader_port_serial_write(const uint8_t*, uint16_t, uint32_t)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ESPSerialFlasher/src/ESPSerialFlasher.cpp:79:17: error: 'SerialNina' was not declared in this scope
    size_t err = SerialNina.write((const char *)data, size);
                 ^~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ESPSerialFlasher/src/ESPSerialFlasher.cpp:79:17: note: suggested alternative: 'Serial1'
    size_t err = SerialNina.write((const char *)data, size);
                 ^~~~~~~~~~
                 Serial1
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ESPSerialFlasher/src/ESPSerialFlasher.cpp: In function 'esp_loader_error_t loader_port_serial_read(uint8_t*, uint16_t, uint32_t)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ESPSerialFlasher/src/ESPSerialFlasher.cpp:91:2: error: 'SerialNina' was not declared in this scope
  SerialNina.setTimeout(timeout);
  ^~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ESPSerialFlasher/src/ESPSerialFlasher.cpp:91:2: note: suggested alternative: 'Serial1'
  SerialNina.setTimeout(timeout);
  ^~~~~~~~~~
  Serial1
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ESPSerialFlasher/src/ESPSerialFlasher.cpp: In function 'void loader_port_enter_bootloader()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ESPSerialFlasher/src/ESPSerialFlasher.cpp:108:18: error: 'NINA_GPIO0' was not declared in this scope
     digitalWrite(NINA_GPIO0, 0);
                  ^~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ESPSerialFlasher/src/ESPSerialFlasher.cpp:108:18: note: suggested alternative: 'GPIO_GPIO0'
     digitalWrite(NINA_GPIO0, 0);
                  ^~~~~~~~~~
                  GPIO_GPIO0
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ESPSerialFlasher/src/ESPSerialFlasher.cpp: In function 'void loader_port_reset_target()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ESPSerialFlasher/src/ESPSerialFlasher.cpp:117:18: error: 'NINA_RESETN' was not declared in this scope
     digitalWrite(NINA_RESETN, 0);
                  ^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ESPSerialFlasher/src/ESPSerialFlasher.cpp:117:18: note: suggested alternative: 'MSC_RESET'
     digitalWrite(NINA_RESETN, 0);
                  ^~~~~~~~~~~
                  MSC_RESET
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ESPSerialFlasher/src/ESPSerialFlasher.cpp: In function 'esp_loader_error_t loader_port_change_baudrate(uint32_t)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ESPSerialFlasher/src/ESPSerialFlasher.cpp:149:5: error: 'SerialNina' was not declared in this scope
     SerialNina.begin(baudrate);
     ^~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ESPSerialFlasher/src/ESPSerialFlasher.cpp:149:5: note: suggested alternative: 'Serial1'
     SerialNina.begin(baudrate);
     ^~~~~~~~~~
     Serial1

examples/EspFlasher

Result: FAIL 

WARNING: library ESPSerialFlasher claims to run on samd architecture(s) and may be incompatible with your current board which runs on megaavr architecture(s).
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ESPSerialFlasher/src/ESPSerialFlasher.cpp: In function 'void ESPFlasherInit(bool, arduino::Print*)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ESPSerialFlasher/src/ESPSerialFlasher.cpp:14:1: error: 'SerialNina' was not declared in this scope
 SerialNina.begin(115200);
 ^~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ESPSerialFlasher/src/ESPSerialFlasher.cpp:14:1: note: suggested alternative: 'Serial1'
 SerialNina.begin(115200);
 ^~~~~~~~~~
 Serial1
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ESPSerialFlasher/src/ESPSerialFlasher.cpp:15:9: error: 'NINA_RESETN' was not declared in this scope
 pinMode(NINA_RESETN, OUTPUT);
         ^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ESPSerialFlasher/src/ESPSerialFlasher.cpp:15:9: note: suggested alternative: 'MSC_RESET'
 pinMode(NINA_RESETN, OUTPUT);
         ^~~~~~~~~~~
         MSC_RESET
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ESPSerialFlasher/src/ESPSerialFlasher.cpp:16:9: error: 'NINA_GPIO0' was not declared in this scope
 pinMode(NINA_GPIO0, OUTPUT);
         ^~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ESPSerialFlasher/src/ESPSerialFlasher.cpp:16:9: note: suggested alternative: 'GPIO_GPIO0'
 pinMode(NINA_GPIO0, OUTPUT);
         ^~~~~~~~~~
         GPIO_GPIO0
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ESPSerialFlasher/src/ESPSerialFlasher.cpp: In function 'esp_loader_error_t loader_port_serial_write(const uint8_t*, uint16_t, uint32_t)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ESPSerialFlasher/src/ESPSerialFlasher.cpp:79:17: error: 'SerialNina' was not declared in this scope
    size_t err = SerialNina.write((const char *)data, size);
                 ^~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ESPSerialFlasher/src/ESPSerialFlasher.cpp:79:17: note: suggested alternative: 'Serial1'
    size_t err = SerialNina.write((const char *)data, size);
                 ^~~~~~~~~~
                 Serial1
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ESPSerialFlasher/src/ESPSerialFlasher.cpp: In function 'esp_loader_error_t loader_port_serial_read(uint8_t*, uint16_t, uint32_t)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ESPSerialFlasher/src/ESPSerialFlasher.cpp:91:2: error: 'SerialNina' was not declared in this scope
  SerialNina.setTimeout(timeout);
  ^~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ESPSerialFlasher/src/ESPSerialFlasher.cpp:91:2: note: suggested alternative: 'Serial1'
  SerialNina.setTimeout(timeout);
  ^~~~~~~~~~
  Serial1
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ESPSerialFlasher/src/ESPSerialFlasher.cpp: In function 'void loader_port_enter_bootloader()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ESPSerialFlasher/src/ESPSerialFlasher.cpp:108:18: error: 'NINA_GPIO0' was not declared in this scope
     digitalWrite(NINA_GPIO0, 0);
                  ^~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ESPSerialFlasher/src/ESPSerialFlasher.cpp:108:18: note: suggested alternative: 'GPIO_GPIO0'
     digitalWrite(NINA_GPIO0, 0);
                  ^~~~~~~~~~
                  GPIO_GPIO0
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ESPSerialFlasher/src/ESPSerialFlasher.cpp: In function 'void loader_port_reset_target()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ESPSerialFlasher/src/ESPSerialFlasher.cpp:117:18: error: 'NINA_RESETN' was not declared in this scope
     digitalWrite(NINA_RESETN, 0);
                  ^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ESPSerialFlasher/src/ESPSerialFlasher.cpp:117:18: note: suggested alternative: 'MSC_RESET'
     digitalWrite(NINA_RESETN, 0);
                  ^~~~~~~~~~~
                  MSC_RESET
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ESPSerialFlasher/src/ESPSerialFlasher.cpp: In function 'esp_loader_error_t loader_port_change_baudrate(uint32_t)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ESPSerialFlasher/src/ESPSerialFlasher.cpp:149:5: error: 'SerialNina' was not declared in this scope
     SerialNina.begin(baudrate);
     ^~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ESPSerialFlasher/src/ESPSerialFlasher.cpp:149:5: note: suggested alternative: 'Serial1'
     SerialNina.begin(baudrate);
     ^~~~~~~~~~
     Serial1

examples/FlashRootCerts

Result: FAIL 

WARNING: library ESPSerialFlasher claims to run on samd architecture(s) and may be incompatible with your current board which runs on megaavr architecture(s).
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ESPSerialFlasher/src/ESPSerialFlasher.cpp: In function 'void ESPFlasherInit(bool, arduino::Print*)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ESPSerialFlasher/src/ESPSerialFlasher.cpp:14:1: error: 'SerialNina' was not declared in this scope
 SerialNina.begin(115200);
 ^~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ESPSerialFlasher/src/ESPSerialFlasher.cpp:14:1: note: suggested alternative: 'Serial1'
 SerialNina.begin(115200);
 ^~~~~~~~~~
 Serial1
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ESPSerialFlasher/src/ESPSerialFlasher.cpp:15:9: error: 'NINA_RESETN' was not declared in this scope
 pinMode(NINA_RESETN, OUTPUT);
         ^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ESPSerialFlasher/src/ESPSerialFlasher.cpp:15:9: note: suggested alternative: 'MSC_RESET'
 pinMode(NINA_RESETN, OUTPUT);
         ^~~~~~~~~~~
         MSC_RESET
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ESPSerialFlasher/src/ESPSerialFlasher.cpp:16:9: error: 'NINA_GPIO0' was not declared in this scope
 pinMode(NINA_GPIO0, OUTPUT);
         ^~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ESPSerialFlasher/src/ESPSerialFlasher.cpp:16:9: note: suggested alternative: 'GPIO_GPIO0'
 pinMode(NINA_GPIO0, OUTPUT);
         ^~~~~~~~~~
         GPIO_GPIO0
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ESPSerialFlasher/src/ESPSerialFlasher.cpp: In function 'esp_loader_error_t loader_port_serial_write(const uint8_t*, uint16_t, uint32_t)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ESPSerialFlasher/src/ESPSerialFlasher.cpp:79:17: error: 'SerialNina' was not declared in this scope
    size_t err = SerialNina.write((const char *)data, size);
                 ^~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ESPSerialFlasher/src/ESPSerialFlasher.cpp:79:17: note: suggested alternative: 'Serial1'
    size_t err = SerialNina.write((const char *)data, size);
                 ^~~~~~~~~~
                 Serial1
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ESPSerialFlasher/src/ESPSerialFlasher.cpp: In function 'esp_loader_error_t loader_port_serial_read(uint8_t*, uint16_t, uint32_t)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ESPSerialFlasher/src/ESPSerialFlasher.cpp:91:2: error: 'SerialNina' was not declared in this scope
  SerialNina.setTimeout(timeout);
  ^~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ESPSerialFlasher/src/ESPSerialFlasher.cpp:91:2: note: suggested alternative: 'Serial1'
  SerialNina.setTimeout(timeout);
  ^~~~~~~~~~
  Serial1
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ESPSerialFlasher/src/ESPSerialFlasher.cpp: In function 'void loader_port_enter_bootloader()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ESPSerialFlasher/src/ESPSerialFlasher.cpp:108:18: error: 'NINA_GPIO0' was not declared in this scope
     digitalWrite(NINA_GPIO0, 0);
                  ^~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ESPSerialFlasher/src/ESPSerialFlasher.cpp:108:18: note: suggested alternative: 'GPIO_GPIO0'
     digitalWrite(NINA_GPIO0, 0);
                  ^~~~~~~~~~
                  GPIO_GPIO0
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ESPSerialFlasher/src/ESPSerialFlasher.cpp: In function 'void loader_port_reset_target()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ESPSerialFlasher/src/ESPSerialFlasher.cpp:117:18: error: 'NINA_RESETN' was not declared in this scope
     digitalWrite(NINA_RESETN, 0);
                  ^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ESPSerialFlasher/src/ESPSerialFlasher.cpp:117:18: note: suggested alternative: 'MSC_RESET'
     digitalWrite(NINA_RESETN, 0);
                  ^~~~~~~~~~~
                  MSC_RESET
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ESPSerialFlasher/src/ESPSerialFlasher.cpp: In function 'esp_loader_error_t loader_port_change_baudrate(uint32_t)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ESPSerialFlasher/src/ESPSerialFlasher.cpp:149:5: error: 'SerialNina' was not declared in this scope
     SerialNina.begin(baudrate);
     ^~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ESPSerialFlasher/src/ESPSerialFlasher.cpp:149:5: note: suggested alternative: 'Serial1'
     SerialNina.begin(baudrate);
     ^~~~~~~~~~
     Serial1

examples/FlashRootCertsNoSDCard

Result: FAIL 

WARNING: library ESPSerialFlasher claims to run on samd architecture(s) and may be incompatible with your current board which runs on megaavr architecture(s).
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ESPSerialFlasher/src/ESPSerialFlasher.cpp: In function 'void ESPFlasherInit(bool, arduino::Print*)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ESPSerialFlasher/src/ESPSerialFlasher.cpp:14:1: error: 'SerialNina' was not declared in this scope
 SerialNina.begin(115200);
 ^~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ESPSerialFlasher/src/ESPSerialFlasher.cpp:14:1: note: suggested alternative: 'Serial1'
 SerialNina.begin(115200);
 ^~~~~~~~~~
 Serial1
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ESPSerialFlasher/src/ESPSerialFlasher.cpp:15:9: error: 'NINA_RESETN' was not declared in this scope
 pinMode(NINA_RESETN, OUTPUT);
         ^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ESPSerialFlasher/src/ESPSerialFlasher.cpp:15:9: note: suggested alternative: 'MSC_RESET'
 pinMode(NINA_RESETN, OUTPUT);
         ^~~~~~~~~~~
         MSC_RESET
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ESPSerialFlasher/src/ESPSerialFlasher.cpp:16:9: error: 'NINA_GPIO0' was not declared in this scope
 pinMode(NINA_GPIO0, OUTPUT);
         ^~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ESPSerialFlasher/src/ESPSerialFlasher.cpp:16:9: note: suggested alternative: 'GPIO_GPIO0'
 pinMode(NINA_GPIO0, OUTPUT);
         ^~~~~~~~~~
         GPIO_GPIO0
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ESPSerialFlasher/src/ESPSerialFlasher.cpp: In function 'esp_loader_error_t loader_port_serial_write(const uint8_t*, uint16_t, uint32_t)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ESPSerialFlasher/src/ESPSerialFlasher.cpp:79:17: error: 'SerialNina' was not declared in this scope
    size_t err = SerialNina.write((const char *)data, size);
                 ^~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ESPSerialFlasher/src/ESPSerialFlasher.cpp:79:17: note: suggested alternative: 'Serial1'
    size_t err = SerialNina.write((const char *)data, size);
                 ^~~~~~~~~~
                 Serial1
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ESPSerialFlasher/src/ESPSerialFlasher.cpp: In function 'esp_loader_error_t loader_port_serial_read(uint8_t*, uint16_t, uint32_t)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ESPSerialFlasher/src/ESPSerialFlasher.cpp:91:2: error: 'SerialNina' was not declared in this scope
  SerialNina.setTimeout(timeout);
  ^~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ESPSerialFlasher/src/ESPSerialFlasher.cpp:91:2: note: suggested alternative: 'Serial1'
  SerialNina.setTimeout(timeout);
  ^~~~~~~~~~
  Serial1
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ESPSerialFlasher/src/ESPSerialFlasher.cpp: In function 'void loader_port_enter_bootloader()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ESPSerialFlasher/src/ESPSerialFlasher.cpp:108:18: error: 'NINA_GPIO0' was not declared in this scope
     digitalWrite(NINA_GPIO0, 0);
                  ^~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ESPSerialFlasher/src/ESPSerialFlasher.cpp:108:18: note: suggested alternative: 'GPIO_GPIO0'
     digitalWrite(NINA_GPIO0, 0);
                  ^~~~~~~~~~
                  GPIO_GPIO0
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ESPSerialFlasher/src/ESPSerialFlasher.cpp: In function 'void loader_port_reset_target()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ESPSerialFlasher/src/ESPSerialFlasher.cpp:117:18: error: 'NINA_RESETN' was not declared in this scope
     digitalWrite(NINA_RESETN, 0);
                  ^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ESPSerialFlasher/src/ESPSerialFlasher.cpp:117:18: note: suggested alternative: 'MSC_RESET'
     digitalWrite(NINA_RESETN, 0);
                  ^~~~~~~~~~~
                  MSC_RESET
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ESPSerialFlasher/src/ESPSerialFlasher.cpp: In function 'esp_loader_error_t loader_port_change_baudrate(uint32_t)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ESPSerialFlasher/src/ESPSerialFlasher.cpp:149:5: error: 'SerialNina' was not declared in this scope
     SerialNina.begin(baudrate);
     ^~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ESPSerialFlasher/src/ESPSerialFlasher.cpp:149:5: note: suggested alternative: 'Serial1'
     SerialNina.begin(baudrate);
     ^~~~~~~~~~
     Serial1

arduino:samd:mkrwifi1010 @ 1.8.12

Inclusion

Result: PASS 

Sketch uses 15752 bytes (6%) of program storage space. Maximum is 262144 bytes.
Global variables use 3724 bytes (11%) of dynamic memory, leaving 29044 bytes for local variables. Maximum is 32768 bytes.

examples/DownloadLatestFW

Result: PASS 

Sketch uses 56060 bytes (21%) of program storage space. Maximum is 262144 bytes.
Global variables use 4568 bytes (13%) of dynamic memory, leaving 28200 bytes for local variables. Maximum is 32768 bytes.

examples/EspFlasher

Result: PASS 

Sketch uses 32852 bytes (12%) of program storage space. Maximum is 262144 bytes.
Global variables use 3760 bytes (11%) of dynamic memory, leaving 29008 bytes for local variables. Maximum is 32768 bytes.

examples/FlashRootCerts

Result: PASS 

Sketch uses 32852 bytes (12%) of program storage space. Maximum is 262144 bytes.
Global variables use 3760 bytes (11%) of dynamic memory, leaving 29008 bytes for local variables. Maximum is 32768 bytes.

examples/FlashRootCertsNoSDCard

Result: PASS 

Sketch uses 82004 bytes (31%) of program storage space. Maximum is 262144 bytes.
Global variables use 3760 bytes (11%) of dynamic memory, leaving 29008 bytes for local variables. Maximum is 32768 bytes.

esp32:esp32:d1_mini32 @ 1.0.6

Inclusion

Result: FAIL 

WARNING: library ESPSerialFlasher claims to run on samd architecture(s) and may be incompatible with your current board which runs on esp32 architecture(s).
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SD/src/utility/Sd2Card.h:26:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SD/src/utility/SdFat.h:29,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SD/src/SD.h:20,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ESPSerialFlasher/src/ESPSerialFlasher.h:7,
                 from /tmp/arduino-testlib1878211625/test/test.ino:1:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SD/src/utility/Sd2PinMap.h:524:2: error: #error Architecture or board not supported.
 #error Architecture or board not supported.
  ^
Multiple libraries were found for "SD.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SD
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/data/packages/esp32/hardware/esp32/1.0.6/libraries/SD

examples/DownloadLatestFW

Result: FAIL 

WARNING: library ESPSerialFlasher claims to run on samd architecture(s) and may be incompatible with your current board which runs on esp32 architecture(s).
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SD/src/utility/Sd2Card.h:26:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SD/src/utility/SdFat.h:29,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SD/src/SD.h:20,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ESPSerialFlasher/src/ESPSerialFlasher.h:7,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ESPSerialFlasher/examples/DownloadLatestFW/DownloadLatestFW.ino:2:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SD/src/utility/Sd2PinMap.h:524:2: error: #error Architecture or board not supported.
 #error Architecture or board not supported.
  ^
Multiple libraries were found for "SD.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SD
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/data/packages/esp32/hardware/esp32/1.0.6/libraries/SD

examples/EspFlasher

Result: FAIL 

WARNING: library ESPSerialFlasher claims to run on samd architecture(s) and may be incompatible with your current board which runs on esp32 architecture(s).
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SD/src/utility/Sd2Card.h:26:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SD/src/utility/SdFat.h:29,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SD/src/SD.h:20,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ESPSerialFlasher/src/ESPSerialFlasher.h:7,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ESPSerialFlasher/examples/EspFlasher/EspFlasher.ino:2:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SD/src/utility/Sd2PinMap.h:524:2: error: #error Architecture or board not supported.
 #error Architecture or board not supported.
  ^
Multiple libraries were found for "SD.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SD
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/data/packages/esp32/hardware/esp32/1.0.6/libraries/SD

examples/FlashRootCerts

Result: FAIL 

WARNING: library ESPSerialFlasher claims to run on samd architecture(s) and may be incompatible with your current board which runs on esp32 architecture(s).
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SD/src/utility/Sd2Card.h:26:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SD/src/utility/SdFat.h:29,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SD/src/SD.h:20,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ESPSerialFlasher/src/ESPSerialFlasher.h:7,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ESPSerialFlasher/examples/FlashRootCerts/FlashRootCerts.ino:2:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SD/src/utility/Sd2PinMap.h:524:2: error: #error Architecture or board not supported.
 #error Architecture or board not supported.
  ^
Multiple libraries were found for "SD.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SD
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/data/packages/esp32/hardware/esp32/1.0.6/libraries/SD

examples/FlashRootCertsNoSDCard

Result: FAIL 

WARNING: library ESPSerialFlasher claims to run on samd architecture(s) and may be incompatible with your current board which runs on esp32 architecture(s).
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SD/src/utility/Sd2Card.h:26:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SD/src/utility/SdFat.h:29,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SD/src/SD.h:20,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ESPSerialFlasher/src/ESPSerialFlasher.h:7,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ESPSerialFlasher/examples/FlashRootCertsNoSDCard/FlashRootCertsNoSDCard.ino:2:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SD/src/utility/Sd2PinMap.h:524:2: error: #error Architecture or board not supported.
 #error Architecture or board not supported.
  ^
Multiple libraries were found for "SD.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SD
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/data/packages/esp32/hardware/esp32/1.0.6/libraries/SD