Easy IoT with CC1101 - Sub-1GHz LORA-like - compatibility matrix

This report was generated on Wednesday, 23-Feb-22 22:48:15 CET using arduino-testlib.

Easy IoT with CC1101 - Sub-1GHz LORA-like

Version: 1.0.4
More details

Compatibility matrix

Board	Claims compatibility	Inclusion	AES_TX_and_RX	Simple_TX_and_RX
arduino:avr:uno 1.8.4	Yes ⚠️	FAIL	FAIL	PASS
arduino:mbed_nano:nanorp2040connect 2.7.2	Yes ⚠️	FAIL	FAIL	FAIL
arduino:megaavr:nona4809 1.8.7	Yes ⚠️	FAIL	FAIL	PASS
arduino:samd:mkrwifi1010 1.8.12	Yes ⚠️	FAIL	FAIL	FAIL
esp32:esp32:d1_mini32 1.0.6	Yes ⚠️	FAIL	FAIL	PASS

Compilation logs

arduino:avr:uno @ 1.8.4

Inclusion

Result: FAIL
This library has no main header file so an empty one was created.

/tmp/arduino-testlib320837003/test/test.ino:1:10: fatal error: Easy_IoT_with_CC1101_-_Sub-1GHz_LORA-like.h: No such file or directory
 #include <Easy_IoT_with_CC1101_-_Sub-1GHz_LORA-like.h>
          ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
compilation terminated.

examples/AES_TX_and_RX

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Easy_IoT_with_CC1101_-_Sub-1GHz_LORA-like/examples/AES_TX_and_RX/AES_TX_and_RX.ino:19:63: error: 'D1' was not declared in this scope
 U8G2_SSD1306_128X64_NONAME_F_SW_I2C u8g2(U8G2_R0, /* clock=*/ D1, /* data=*/ D3, /* reset=*/ U8X8_PIN_NONE); // MUST USE D3 for Data
                                                               ^~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Easy_IoT_with_CC1101_-_Sub-1GHz_LORA-like/examples/AES_TX_and_RX/AES_TX_and_RX.ino:19:63: note: suggested alternative: 'A1'
 U8G2_SSD1306_128X64_NONAME_F_SW_I2C u8g2(U8G2_R0, /* clock=*/ D1, /* data=*/ D3, /* reset=*/ U8X8_PIN_NONE); // MUST USE D3 for Data
                                                               ^~
                                                               A1
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Easy_IoT_with_CC1101_-_Sub-1GHz_LORA-like/examples/AES_TX_and_RX/AES_TX_and_RX.ino:19:78: error: 'D3' was not declared in this scope
 U8G2_SSD1306_128X64_NONAME_F_SW_I2C u8g2(U8G2_R0, /* clock=*/ D1, /* data=*/ D3, /* reset=*/ U8X8_PIN_NONE); // MUST USE D3 for Data
                                                                              ^~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Easy_IoT_with_CC1101_-_Sub-1GHz_LORA-like/examples/AES_TX_and_RX/AES_TX_and_RX.ino:19:78: note: suggested alternative: 'A3'
 U8G2_SSD1306_128X64_NONAME_F_SW_I2C u8g2(U8G2_R0, /* clock=*/ D1, /* data=*/ D3, /* reset=*/ U8X8_PIN_NONE); // MUST USE D3 for Data
                                                                              ^~
                                                                              A3
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Easy_IoT_with_CC1101_-_Sub-1GHz_LORA-like/examples/AES_TX_and_RX/AES_TX_and_RX.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Easy_IoT_with_CC1101_-_Sub-1GHz_LORA-like/examples/AES_TX_and_RX/AES_TX_and_RX.ino:69:99: error: no matching function for call to 'CC1101::begin(CFREQ, DATA_RATE, int, const int&)'
     if ( !radio.begin(CFREQ_868, KBPS_250, /* channel num */ 16, /* address */ THIS_DEVICE_ADDRESS) ) // Channel 16. This device has an address of 64
                                                                                                   ^
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Easy_IoT_with_CC1101_-_Sub-1GHz_LORA-like/examples/AES_TX_and_RX/AES_TX_and_RX.ino:2:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Easy_IoT_with_CC1101_-_Sub-1GHz_LORA-like/cc1101.h:563:10: note: candidate: bool CC1101::begin(CFREQ, DATA_RATE, uint8_t, uint8_t, uint8_t)
     bool begin(CFREQ freq, DATA_RATE rate, uint8_t channr, uint8_t addr, uint8_t interrupt_pin);
          ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Easy_IoT_with_CC1101_-_Sub-1GHz_LORA-like/cc1101.h:563:10: note:   candidate expects 5 arguments, 4 provided
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Easy_IoT_with_CC1101_-_Sub-1GHz_LORA-like/cc1101.h:566:10: note: candidate: bool CC1101::begin(const byte*, uint8_t)
     bool begin(const byte regConfig[NUM_CONFIG_REGISTERS], uint8_t interrupt_pin);
          ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Easy_IoT_with_CC1101_-_Sub-1GHz_LORA-like/cc1101.h:566:10: note:   candidate expects 2 arguments, 4 provided
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Easy_IoT_with_CC1101_-_Sub-1GHz_LORA-like/examples/AES_TX_and_RX/AES_TX_and_RX.ino: In function 'void loop()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Easy_IoT_with_CC1101_-_Sub-1GHz_LORA-like/examples/AES_TX_and_RX/AES_TX_and_RX.ino:105:12: error: 'class HardwareSerial' has no member named 'printf'; did you mean 'print'?
     Serial.printf("\nRECEIVED CIPHER:");
            ^~~~~~
            print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Easy_IoT_with_CC1101_-_Sub-1GHz_LORA-like/examples/AES_TX_and_RX/AES_TX_and_RX.ino:106:61: error: call of overloaded 'printArray(byte*, uint16_t&)' is ambiguous
     aes.printArray((byte *)recieveBuffer, receivedStreamSize);
                                                             ^
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Easy_IoT_with_CC1101_-_Sub-1GHz_LORA-like/examples/AES_TX_and_RX/AES_TX_and_RX.ino:4:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Easy_IoT_with_CC1101_-_Sub-1GHz_LORA-like/examples/AES_TX_and_RX/AES.h:233:7: note: candidate: void AES::printArray(byte*, bool)
  void printArray(byte output[],bool p_pad = true);
       ^~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Easy_IoT_with_CC1101_-_Sub-1GHz_LORA-like/examples/AES_TX_and_RX/AES.h:242:7: note: candidate: void AES::printArray(byte*, int)
  void printArray(byte output[],int sizel);
       ^~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Easy_IoT_with_CC1101_-_Sub-1GHz_LORA-like/examples/AES_TX_and_RX/AES_TX_and_RX.ino:174:14: error: 'class HardwareSerial' has no member named 'printf'; did you mean 'print'?
       Serial.printf("Plaintext is %d chars in length.\n", plainLength);
              ^~~~~~
              print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Easy_IoT_with_CC1101_-_Sub-1GHz_LORA-like/examples/AES_TX_and_RX/AES_TX_and_RX.ino:176:14: error: 'class HardwareSerial' has no member named 'printf'; did you mean 'print'?
       Serial.printf("Padded ciphertext is %d bytes in length.\n", paddedLength);
              ^~~~~~
              print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Easy_IoT_with_CC1101_-_Sub-1GHz_LORA-like/examples/AES_TX_and_RX/AES_TX_and_RX.ino:193:14: error: 'class HardwareSerial' has no member named 'printf'; did you mean 'print'?
       Serial.printf("\n\nPLAIN :");
              ^~~~~~
              print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Easy_IoT_with_CC1101_-_Sub-1GHz_LORA-like/examples/AES_TX_and_RX/AES_TX_and_RX.ino:195:14: error: 'class HardwareSerial' has no member named 'printf'; did you mean 'print'?
       Serial.printf("\nCIPHER:");
              ^~~~~~
              print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Easy_IoT_with_CC1101_-_Sub-1GHz_LORA-like/examples/AES_TX_and_RX/AES_TX_and_RX.ino:197:14: error: 'class HardwareSerial' has no member named 'printf'; did you mean 'print'?
       Serial.printf("\nCHECK :");
              ^~~~~~
              print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Easy_IoT_with_CC1101_-_Sub-1GHz_LORA-like/examples/AES_TX_and_RX/AES_TX_and_RX.ino:199:14: error: 'class HardwareSerial' has no member named 'printf'; did you mean 'print'?
       Serial.printf("\nIV    :");
              ^~~~~~
              print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Easy_IoT_with_CC1101_-_Sub-1GHz_LORA-like/examples/AES_TX_and_RX/AES_TX_and_RX.ino:201:14: error: 'class HardwareSerial' has no member named 'printf'; did you mean 'print'?
       Serial.printf("\n============================================================\n");
              ^~~~~~
              print

examples/Simple_TX_and_RX

Result: PASS

Sketch uses 15006 bytes (46%) of program storage space. Maximum is 32256 bytes.
Global variables use 751 bytes (36%) of dynamic memory, leaving 1297 bytes for local variables. Maximum is 2048 bytes.

arduino:mbed_nano:nanorp2040connect @ 2.7.2

Inclusion

Result: FAIL
This library has no main header file so an empty one was created.

/tmp/arduino-testlib3814172323/test/test.ino:1:10: fatal error: Easy_IoT_with_CC1101_-_Sub-1GHz_LORA-like.h: No such file or directory
 #include <Easy_IoT_with_CC1101_-_Sub-1GHz_LORA-like.h>
          ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
compilation terminated.

examples/AES_TX_and_RX

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Easy_IoT_with_CC1101_-_Sub-1GHz_LORA-like/examples/AES_TX_and_RX/AES_TX_and_RX.ino:19:63: error: 'D1' was not declared in this scope
 U8G2_SSD1306_128X64_NONAME_F_SW_I2C u8g2(U8G2_R0, /* clock=*/ D1, /* data=*/ D3, /* reset=*/ U8X8_PIN_NONE); // MUST USE D3 for Data
                                                               ^~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Easy_IoT_with_CC1101_-_Sub-1GHz_LORA-like/examples/AES_TX_and_RX/AES_TX_and_RX.ino:19:63: note: suggested alternative: 'A1'
 U8G2_SSD1306_128X64_NONAME_F_SW_I2C u8g2(U8G2_R0, /* clock=*/ D1, /* data=*/ D3, /* reset=*/ U8X8_PIN_NONE); // MUST USE D3 for Data
                                                               ^~
                                                               A1
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Easy_IoT_with_CC1101_-_Sub-1GHz_LORA-like/examples/AES_TX_and_RX/AES_TX_and_RX.ino:19:78: error: 'D3' was not declared in this scope
 U8G2_SSD1306_128X64_NONAME_F_SW_I2C u8g2(U8G2_R0, /* clock=*/ D1, /* data=*/ D3, /* reset=*/ U8X8_PIN_NONE); // MUST USE D3 for Data
                                                                              ^~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Easy_IoT_with_CC1101_-_Sub-1GHz_LORA-like/examples/AES_TX_and_RX/AES_TX_and_RX.ino:19:78: note: suggested alternative: 'A3'
 U8G2_SSD1306_128X64_NONAME_F_SW_I2C u8g2(U8G2_R0, /* clock=*/ D1, /* data=*/ D3, /* reset=*/ U8X8_PIN_NONE); // MUST USE D3 for Data
                                                                              ^~
                                                                              A3
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Easy_IoT_with_CC1101_-_Sub-1GHz_LORA-like/examples/AES_TX_and_RX/AES_TX_and_RX.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Easy_IoT_with_CC1101_-_Sub-1GHz_LORA-like/examples/AES_TX_and_RX/AES_TX_and_RX.ino:69:99: error: no matching function for call to 'CC1101::begin(CFREQ, DATA_RATE, int, const int&)'
     if ( !radio.begin(CFREQ_868, KBPS_250, /* channel num */ 16, /* address */ THIS_DEVICE_ADDRESS) ) // Channel 16. This device has an address of 64
                                                                                                   ^
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Easy_IoT_with_CC1101_-_Sub-1GHz_LORA-like/examples/AES_TX_and_RX/AES_TX_and_RX.ino:2:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Easy_IoT_with_CC1101_-_Sub-1GHz_LORA-like/cc1101.h:563:10: note: candidate: bool CC1101::begin(CFREQ, DATA_RATE, uint8_t, uint8_t, uint8_t)
     bool begin(CFREQ freq, DATA_RATE rate, uint8_t channr, uint8_t addr, uint8_t interrupt_pin);
          ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Easy_IoT_with_CC1101_-_Sub-1GHz_LORA-like/cc1101.h:563:10: note:   candidate expects 5 arguments, 4 provided
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Easy_IoT_with_CC1101_-_Sub-1GHz_LORA-like/cc1101.h:566:10: note: candidate: bool CC1101::begin(const byte*, uint8_t)
     bool begin(const byte regConfig[NUM_CONFIG_REGISTERS], uint8_t interrupt_pin);
          ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Easy_IoT_with_CC1101_-_Sub-1GHz_LORA-like/cc1101.h:566:10: note:   candidate expects 2 arguments, 4 provided
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Easy_IoT_with_CC1101_-_Sub-1GHz_LORA-like/examples/AES_TX_and_RX/AES_TX_and_RX.ino: In function 'void loop()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Easy_IoT_with_CC1101_-_Sub-1GHz_LORA-like/examples/AES_TX_and_RX/AES_TX_and_RX.ino:105:12: error: 'class arduino::UART' has no member named 'printf'; did you mean 'print'?
     Serial.printf("\nRECEIVED CIPHER:");
            ^~~~~~
            print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Easy_IoT_with_CC1101_-_Sub-1GHz_LORA-like/examples/AES_TX_and_RX/AES_TX_and_RX.ino:174:14: error: 'class arduino::UART' has no member named 'printf'; did you mean 'print'?
       Serial.printf("Plaintext is %d chars in length.\n", plainLength);
              ^~~~~~
              print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Easy_IoT_with_CC1101_-_Sub-1GHz_LORA-like/examples/AES_TX_and_RX/AES_TX_and_RX.ino:176:14: error: 'class arduino::UART' has no member named 'printf'; did you mean 'print'?
       Serial.printf("Padded ciphertext is %d bytes in length.\n", paddedLength);
              ^~~~~~
              print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Easy_IoT_with_CC1101_-_Sub-1GHz_LORA-like/examples/AES_TX_and_RX/AES_TX_and_RX.ino:193:14: error: 'class arduino::UART' has no member named 'printf'; did you mean 'print'?
       Serial.printf("\n\nPLAIN :");
              ^~~~~~
              print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Easy_IoT_with_CC1101_-_Sub-1GHz_LORA-like/examples/AES_TX_and_RX/AES_TX_and_RX.ino:195:14: error: 'class arduino::UART' has no member named 'printf'; did you mean 'print'?
       Serial.printf("\nCIPHER:");
              ^~~~~~
              print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Easy_IoT_with_CC1101_-_Sub-1GHz_LORA-like/examples/AES_TX_and_RX/AES_TX_and_RX.ino:197:14: error: 'class arduino::UART' has no member named 'printf'; did you mean 'print'?
       Serial.printf("\nCHECK :");
              ^~~~~~
              print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Easy_IoT_with_CC1101_-_Sub-1GHz_LORA-like/examples/AES_TX_and_RX/AES_TX_and_RX.ino:199:14: error: 'class arduino::UART' has no member named 'printf'; did you mean 'print'?
       Serial.printf("\nIV    :");
              ^~~~~~
              print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Easy_IoT_with_CC1101_-_Sub-1GHz_LORA-like/examples/AES_TX_and_RX/AES_TX_and_RX.ino:201:14: error: 'class arduino::UART' has no member named 'printf'; did you mean 'print'?
       Serial.printf("\n============================================================\n");
              ^~~~~~
              print

examples/Simple_TX_and_RX

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Easy_IoT_with_CC1101_-_Sub-1GHz_LORA-like/examples/Simple_TX_and_RX/Simple_TX_and_RX.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Easy_IoT_with_CC1101_-_Sub-1GHz_LORA-like/examples/Simple_TX_and_RX/Simple_TX_and_RX.ino:90:104: error: 'GDO0_INTERRUPT_PIN' was not declared in this scope
     while ( !radio.begin(CFREQ_868, KBPS_250, /* channel num */ 16, /* address */ THIS_DEVICE_ADDRESS, GDO0_INTERRUPT_PIN /* Interrupt */) ) // channel 16! Whitening enabled
                                                                                                        ^~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Easy_IoT_with_CC1101_-_Sub-1GHz_LORA-like/examples/Simple_TX_and_RX/Simple_TX_and_RX.ino:90:104: note: suggested alternative: 'DEVICE_INTERRUPTIN'
     while ( !radio.begin(CFREQ_868, KBPS_250, /* channel num */ 16, /* address */ THIS_DEVICE_ADDRESS, GDO0_INTERRUPT_PIN /* Interrupt */) ) // channel 16! Whitening enabled
                                                                                                        ^~~~~~~~~~~~~~~~~~
                                                                                                        DEVICE_INTERRUPTIN

arduino:megaavr:nona4809 @ 1.8.7

Inclusion

Result: FAIL
This library has no main header file so an empty one was created.

/tmp/arduino-testlib3814172323/test/test.ino:1:10: fatal error: Easy_IoT_with_CC1101_-_Sub-1GHz_LORA-like.h: No such file or directory
 #include <Easy_IoT_with_CC1101_-_Sub-1GHz_LORA-like.h>
          ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
compilation terminated.

examples/AES_TX_and_RX

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Easy_IoT_with_CC1101_-_Sub-1GHz_LORA-like/examples/AES_TX_and_RX/AES_TX_and_RX.ino:19:63: error: 'D1' was not declared in this scope
 U8G2_SSD1306_128X64_NONAME_F_SW_I2C u8g2(U8G2_R0, /* clock=*/ D1, /* data=*/ D3, /* reset=*/ U8X8_PIN_NONE); // MUST USE D3 for Data
                                                               ^~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Easy_IoT_with_CC1101_-_Sub-1GHz_LORA-like/examples/AES_TX_and_RX/AES_TX_and_RX.ino:19:63: note: suggested alternative: 'A1'
 U8G2_SSD1306_128X64_NONAME_F_SW_I2C u8g2(U8G2_R0, /* clock=*/ D1, /* data=*/ D3, /* reset=*/ U8X8_PIN_NONE); // MUST USE D3 for Data
                                                               ^~
                                                               A1
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Easy_IoT_with_CC1101_-_Sub-1GHz_LORA-like/examples/AES_TX_and_RX/AES_TX_and_RX.ino:19:78: error: 'D3' was not declared in this scope
 U8G2_SSD1306_128X64_NONAME_F_SW_I2C u8g2(U8G2_R0, /* clock=*/ D1, /* data=*/ D3, /* reset=*/ U8X8_PIN_NONE); // MUST USE D3 for Data
                                                                              ^~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Easy_IoT_with_CC1101_-_Sub-1GHz_LORA-like/examples/AES_TX_and_RX/AES_TX_and_RX.ino:19:78: note: suggested alternative: 'A3'
 U8G2_SSD1306_128X64_NONAME_F_SW_I2C u8g2(U8G2_R0, /* clock=*/ D1, /* data=*/ D3, /* reset=*/ U8X8_PIN_NONE); // MUST USE D3 for Data
                                                                              ^~
                                                                              A3
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Easy_IoT_with_CC1101_-_Sub-1GHz_LORA-like/examples/AES_TX_and_RX/AES_TX_and_RX.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Easy_IoT_with_CC1101_-_Sub-1GHz_LORA-like/examples/AES_TX_and_RX/AES_TX_and_RX.ino:69:99: error: no matching function for call to 'CC1101::begin(CFREQ, DATA_RATE, int, const int&)'
     if ( !radio.begin(CFREQ_868, KBPS_250, /* channel num */ 16, /* address */ THIS_DEVICE_ADDRESS) ) // Channel 16. This device has an address of 64
                                                                                                   ^
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Easy_IoT_with_CC1101_-_Sub-1GHz_LORA-like/examples/AES_TX_and_RX/AES_TX_and_RX.ino:2:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Easy_IoT_with_CC1101_-_Sub-1GHz_LORA-like/cc1101.h:563:10: note: candidate: bool CC1101::begin(CFREQ, DATA_RATE, uint8_t, uint8_t, uint8_t)
     bool begin(CFREQ freq, DATA_RATE rate, uint8_t channr, uint8_t addr, uint8_t interrupt_pin);
          ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Easy_IoT_with_CC1101_-_Sub-1GHz_LORA-like/cc1101.h:563:10: note:   candidate expects 5 arguments, 4 provided
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Easy_IoT_with_CC1101_-_Sub-1GHz_LORA-like/cc1101.h:566:10: note: candidate: bool CC1101::begin(const byte*, uint8_t)
     bool begin(const byte regConfig[NUM_CONFIG_REGISTERS], uint8_t interrupt_pin);
          ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Easy_IoT_with_CC1101_-_Sub-1GHz_LORA-like/cc1101.h:566:10: note:   candidate expects 2 arguments, 4 provided
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Easy_IoT_with_CC1101_-_Sub-1GHz_LORA-like/examples/AES_TX_and_RX/AES_TX_and_RX.ino: In function 'void loop()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Easy_IoT_with_CC1101_-_Sub-1GHz_LORA-like/examples/AES_TX_and_RX/AES_TX_and_RX.ino:105:12: error: 'class UartClass' has no member named 'printf'; did you mean 'print'?
     Serial.printf("\nRECEIVED CIPHER:");
            ^~~~~~
            print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Easy_IoT_with_CC1101_-_Sub-1GHz_LORA-like/examples/AES_TX_and_RX/AES_TX_and_RX.ino:106:61: error: call of overloaded 'printArray(byte*, uint16_t&)' is ambiguous
     aes.printArray((byte *)recieveBuffer, receivedStreamSize);
                                                             ^
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Easy_IoT_with_CC1101_-_Sub-1GHz_LORA-like/examples/AES_TX_and_RX/AES_TX_and_RX.ino:4:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Easy_IoT_with_CC1101_-_Sub-1GHz_LORA-like/examples/AES_TX_and_RX/AES.h:233:7: note: candidate: void AES::printArray(byte*, bool)
  void printArray(byte output[],bool p_pad = true);
       ^~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Easy_IoT_with_CC1101_-_Sub-1GHz_LORA-like/examples/AES_TX_and_RX/AES.h:242:7: note: candidate: void AES::printArray(byte*, int)
  void printArray(byte output[],int sizel);
       ^~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Easy_IoT_with_CC1101_-_Sub-1GHz_LORA-like/examples/AES_TX_and_RX/AES_TX_and_RX.ino:174:14: error: 'class UartClass' has no member named 'printf'; did you mean 'print'?
       Serial.printf("Plaintext is %d chars in length.\n", plainLength);
              ^~~~~~
              print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Easy_IoT_with_CC1101_-_Sub-1GHz_LORA-like/examples/AES_TX_and_RX/AES_TX_and_RX.ino:176:14: error: 'class UartClass' has no member named 'printf'; did you mean 'print'?
       Serial.printf("Padded ciphertext is %d bytes in length.\n", paddedLength);
              ^~~~~~
              print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Easy_IoT_with_CC1101_-_Sub-1GHz_LORA-like/examples/AES_TX_and_RX/AES_TX_and_RX.ino:193:14: error: 'class UartClass' has no member named 'printf'; did you mean 'print'?
       Serial.printf("\n\nPLAIN :");
              ^~~~~~
              print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Easy_IoT_with_CC1101_-_Sub-1GHz_LORA-like/examples/AES_TX_and_RX/AES_TX_and_RX.ino:195:14: error: 'class UartClass' has no member named 'printf'; did you mean 'print'?
       Serial.printf("\nCIPHER:");
              ^~~~~~
              print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Easy_IoT_with_CC1101_-_Sub-1GHz_LORA-like/examples/AES_TX_and_RX/AES_TX_and_RX.ino:197:14: error: 'class UartClass' has no member named 'printf'; did you mean 'print'?
       Serial.printf("\nCHECK :");
              ^~~~~~
              print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Easy_IoT_with_CC1101_-_Sub-1GHz_LORA-like/examples/AES_TX_and_RX/AES_TX_and_RX.ino:199:14: error: 'class UartClass' has no member named 'printf'; did you mean 'print'?
       Serial.printf("\nIV    :");
              ^~~~~~
              print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Easy_IoT_with_CC1101_-_Sub-1GHz_LORA-like/examples/AES_TX_and_RX/AES_TX_and_RX.ino:201:14: error: 'class UartClass' has no member named 'printf'; did you mean 'print'?
       Serial.printf("\n============================================================\n");
              ^~~~~~
              print

examples/Simple_TX_and_RX

Result: PASS

Sketch uses 17927 bytes (36%) of program storage space. Maximum is 49152 bytes.
Global variables use 871 bytes (14%) of dynamic memory, leaving 5273 bytes for local variables. Maximum is 6144 bytes.

arduino:samd:mkrwifi1010 @ 1.8.12

Inclusion

Result: FAIL
This library has no main header file so an empty one was created.

/tmp/arduino-testlib320837003/test/test.ino:1:10: fatal error: Easy_IoT_with_CC1101_-_Sub-1GHz_LORA-like.h: No such file or directory
 #include <Easy_IoT_with_CC1101_-_Sub-1GHz_LORA-like.h>
          ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
compilation terminated.

examples/AES_TX_and_RX

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Easy_IoT_with_CC1101_-_Sub-1GHz_LORA-like/examples/AES_TX_and_RX/AES_TX_and_RX.ino:19:63: error: 'D1' was not declared in this scope
 U8G2_SSD1306_128X64_NONAME_F_SW_I2C u8g2(U8G2_R0, /* clock=*/ D1, /* data=*/ D3, /* reset=*/ U8X8_PIN_NONE); // MUST USE D3 for Data
                                                               ^~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Easy_IoT_with_CC1101_-_Sub-1GHz_LORA-like/examples/AES_TX_and_RX/AES_TX_and_RX.ino:19:63: note: suggested alternative: 'A1'
 U8G2_SSD1306_128X64_NONAME_F_SW_I2C u8g2(U8G2_R0, /* clock=*/ D1, /* data=*/ D3, /* reset=*/ U8X8_PIN_NONE); // MUST USE D3 for Data
                                                               ^~
                                                               A1
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Easy_IoT_with_CC1101_-_Sub-1GHz_LORA-like/examples/AES_TX_and_RX/AES_TX_and_RX.ino:19:78: error: 'D3' was not declared in this scope
 U8G2_SSD1306_128X64_NONAME_F_SW_I2C u8g2(U8G2_R0, /* clock=*/ D1, /* data=*/ D3, /* reset=*/ U8X8_PIN_NONE); // MUST USE D3 for Data
                                                                              ^~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Easy_IoT_with_CC1101_-_Sub-1GHz_LORA-like/examples/AES_TX_and_RX/AES_TX_and_RX.ino:19:78: note: suggested alternative: 'A3'
 U8G2_SSD1306_128X64_NONAME_F_SW_I2C u8g2(U8G2_R0, /* clock=*/ D1, /* data=*/ D3, /* reset=*/ U8X8_PIN_NONE); // MUST USE D3 for Data
                                                                              ^~
                                                                              A3
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Easy_IoT_with_CC1101_-_Sub-1GHz_LORA-like/examples/AES_TX_and_RX/AES_TX_and_RX.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Easy_IoT_with_CC1101_-_Sub-1GHz_LORA-like/examples/AES_TX_and_RX/AES_TX_and_RX.ino:69:99: error: no matching function for call to 'CC1101::begin(CFREQ, DATA_RATE, int, const int&)'
     if ( !radio.begin(CFREQ_868, KBPS_250, /* channel num */ 16, /* address */ THIS_DEVICE_ADDRESS) ) // Channel 16. This device has an address of 64
                                                                                                   ^
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Easy_IoT_with_CC1101_-_Sub-1GHz_LORA-like/examples/AES_TX_and_RX/AES_TX_and_RX.ino:2:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Easy_IoT_with_CC1101_-_Sub-1GHz_LORA-like/cc1101.h:563:10: note: candidate: bool CC1101::begin(CFREQ, DATA_RATE, uint8_t, uint8_t, uint8_t)
     bool begin(CFREQ freq, DATA_RATE rate, uint8_t channr, uint8_t addr, uint8_t interrupt_pin);
          ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Easy_IoT_with_CC1101_-_Sub-1GHz_LORA-like/cc1101.h:563:10: note:   candidate expects 5 arguments, 4 provided
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Easy_IoT_with_CC1101_-_Sub-1GHz_LORA-like/cc1101.h:566:10: note: candidate: bool CC1101::begin(const byte*, uint8_t)
     bool begin(const byte regConfig[NUM_CONFIG_REGISTERS], uint8_t interrupt_pin);
          ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Easy_IoT_with_CC1101_-_Sub-1GHz_LORA-like/cc1101.h:566:10: note:   candidate expects 2 arguments, 4 provided
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Easy_IoT_with_CC1101_-_Sub-1GHz_LORA-like/examples/AES_TX_and_RX/AES_TX_and_RX.ino: In function 'void loop()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Easy_IoT_with_CC1101_-_Sub-1GHz_LORA-like/examples/AES_TX_and_RX/AES_TX_and_RX.ino:105:12: error: 'class Serial_' has no member named 'printf'; did you mean 'print'?
     Serial.printf("\nRECEIVED CIPHER:");
            ^~~~~~
            print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Easy_IoT_with_CC1101_-_Sub-1GHz_LORA-like/examples/AES_TX_and_RX/AES_TX_and_RX.ino:174:14: error: 'class Serial_' has no member named 'printf'; did you mean 'print'?
       Serial.printf("Plaintext is %d chars in length.\n", plainLength);
              ^~~~~~
              print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Easy_IoT_with_CC1101_-_Sub-1GHz_LORA-like/examples/AES_TX_and_RX/AES_TX_and_RX.ino:176:14: error: 'class Serial_' has no member named 'printf'; did you mean 'print'?
       Serial.printf("Padded ciphertext is %d bytes in length.\n", paddedLength);
              ^~~~~~
              print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Easy_IoT_with_CC1101_-_Sub-1GHz_LORA-like/examples/AES_TX_and_RX/AES_TX_and_RX.ino:193:14: error: 'class Serial_' has no member named 'printf'; did you mean 'print'?
       Serial.printf("\n\nPLAIN :");
              ^~~~~~
              print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Easy_IoT_with_CC1101_-_Sub-1GHz_LORA-like/examples/AES_TX_and_RX/AES_TX_and_RX.ino:195:14: error: 'class Serial_' has no member named 'printf'; did you mean 'print'?
       Serial.printf("\nCIPHER:");
              ^~~~~~
              print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Easy_IoT_with_CC1101_-_Sub-1GHz_LORA-like/examples/AES_TX_and_RX/AES_TX_and_RX.ino:197:14: error: 'class Serial_' has no member named 'printf'; did you mean 'print'?
       Serial.printf("\nCHECK :");
              ^~~~~~
              print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Easy_IoT_with_CC1101_-_Sub-1GHz_LORA-like/examples/AES_TX_and_RX/AES_TX_and_RX.ino:199:14: error: 'class Serial_' has no member named 'printf'; did you mean 'print'?
       Serial.printf("\nIV    :");
              ^~~~~~
              print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Easy_IoT_with_CC1101_-_Sub-1GHz_LORA-like/examples/AES_TX_and_RX/AES_TX_and_RX.ino:201:14: error: 'class Serial_' has no member named 'printf'; did you mean 'print'?
       Serial.printf("\n============================================================\n");
              ^~~~~~
              print

examples/Simple_TX_and_RX

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Easy_IoT_with_CC1101_-_Sub-1GHz_LORA-like/examples/Simple_TX_and_RX/Simple_TX_and_RX.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Easy_IoT_with_CC1101_-_Sub-1GHz_LORA-like/examples/Simple_TX_and_RX/Simple_TX_and_RX.ino:90:104: error: 'GDO0_INTERRUPT_PIN' was not declared in this scope
     while ( !radio.begin(CFREQ_868, KBPS_250, /* channel num */ 16, /* address */ THIS_DEVICE_ADDRESS, GDO0_INTERRUPT_PIN /* Interrupt */) ) // channel 16! Whitening enabled
                                                                                                        ^~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Easy_IoT_with_CC1101_-_Sub-1GHz_LORA-like/examples/Simple_TX_and_RX/Simple_TX_and_RX.ino:90:104: note: suggested alternative: 'W_INTERRUPTS_CPP'
     while ( !radio.begin(CFREQ_868, KBPS_250, /* channel num */ 16, /* address */ THIS_DEVICE_ADDRESS, GDO0_INTERRUPT_PIN /* Interrupt */) ) // channel 16! Whitening enabled
                                                                                                        ^~~~~~~~~~~~~~~~~~
                                                                                                        W_INTERRUPTS_CPP

esp32:esp32:d1_mini32 @ 1.0.6

Inclusion

Result: FAIL
This library has no main header file so an empty one was created.

/tmp/arduino-testlib3814172323/test/test.ino:1:55: fatal error: Easy_IoT_with_CC1101_-_Sub-1GHz_LORA-like.h: No such file or directory
compilation terminated.

examples/AES_TX_and_RX

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Easy_IoT_with_CC1101_-_Sub-1GHz_LORA-like/examples/AES_TX_and_RX/AES_TX_and_RX.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Easy_IoT_with_CC1101_-_Sub-1GHz_LORA-like/examples/AES_TX_and_RX/AES_TX_and_RX.ino:69:99: error: no matching function for call to 'CC1101::begin(CFREQ, DATA_RATE, int, const int&)'
     if ( !radio.begin(CFREQ_868, KBPS_250, /* channel num */ 16, /* address */ THIS_DEVICE_ADDRESS) ) // Channel 16. This device has an address of 64
                                                                                                   ^
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Easy_IoT_with_CC1101_-_Sub-1GHz_LORA-like/examples/AES_TX_and_RX/AES_TX_and_RX.ino:2:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Easy_IoT_with_CC1101_-_Sub-1GHz_LORA-like/cc1101.h:563:10: note: candidate: bool CC1101::begin(CFREQ, DATA_RATE, uint8_t, uint8_t, uint8_t)
     bool begin(CFREQ freq, DATA_RATE rate, uint8_t channr, uint8_t addr, uint8_t interrupt_pin);
          ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Easy_IoT_with_CC1101_-_Sub-1GHz_LORA-like/cc1101.h:563:10: note:   candidate expects 5 arguments, 4 provided
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Easy_IoT_with_CC1101_-_Sub-1GHz_LORA-like/cc1101.h:566:10: note: candidate: bool CC1101::begin(const byte*, uint8_t)
     bool begin(const byte regConfig[NUM_CONFIG_REGISTERS], uint8_t interrupt_pin);    
          ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Easy_IoT_with_CC1101_-_Sub-1GHz_LORA-like/cc1101.h:566:10: note:   candidate expects 2 arguments, 4 provided

examples/Simple_TX_and_RX

Result: PASS

Sketch uses 221278 bytes (16%) of program storage space. Maximum is 1310720 bytes.
Global variables use 14440 bytes (4%) of dynamic memory, leaving 313240 bytes for local variables. Maximum is 327680 bytes.