EmotiBit BMI160 - compatibility matrix

This report was generated on Wednesday, 23-Feb-22 22:48:15 CET using arduino-testlib.

EmotiBit BMI160

Version: 0.3.2
More details

Compatibility matrix

Board	Claims compatibility	Inclusion	Interrupt	Gyro
arduino:avr:uno 1.8.4	Yes ⚠️	FAIL	FAIL	PASS
arduino:mbed_nano:nanorp2040connect 2.7.2	Yes ⚠️	FAIL	FAIL	PASS
arduino:megaavr:nona4809 1.8.7	Yes ⚠️	FAIL	FAIL	FAIL
arduino:samd:mkrwifi1010 1.8.12	Yes ⚠️	FAIL	FAIL	PASS
esp32:esp32:d1_mini32 1.0.6	Yes ⚠️	FAIL	FAIL	PASS

Compilation logs

arduino:avr:uno @ 1.8.4

Inclusion

Result: FAIL
This library has no main header file so an empty one was created.

/tmp/arduino-testlib1185418340/test/test.ino:1:10: fatal error: EmotiBit_BMI160.h: No such file or directory
 #include <EmotiBit_BMI160.h>
          ^~~~~~~~~~~~~~~~~~~
compilation terminated.

examples/Gyro

Result: PASS

Sketch uses 7822 bytes (24%) of program storage space. Maximum is 32256 bytes.
Global variables use 653 bytes (31%) of dynamic memory, leaving 1395 bytes for local variables. Maximum is 2048 bytes.

examples/Interrupt

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EmotiBit_BMI160/examples/Interrupt/Interrupt.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EmotiBit_BMI160/examples/Interrupt/Interrupt.ino:18:81: error: no matching function for call to 'BMI160GenClass::begin(BMI160GenClass::Mode, const int&, const int&)'
   BMI160.begin(BMI160GenClass::SPI_MODE, bmi160_select_pin, bmi160_interrupt_pin);
                                                                                 ^
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EmotiBit_BMI160/examples/Interrupt/Interrupt.ino:1:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EmotiBit_BMI160/BMI160Gen.h:11:14: note: candidate: bool BMI160GenClass::begin(int, int)
         bool begin(const int spi_cs_pin = 10, const int intr_pin = 2);
              ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EmotiBit_BMI160/BMI160Gen.h:11:14: note:   candidate expects 2 arguments, 3 provided
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EmotiBit_BMI160/BMI160Gen.h:12:14: note: candidate: bool BMI160GenClass::begin(BMI160GenClass::Mode, TwoWire&, int, int)
         bool begin(Mode mode, TwoWire &wirePort = Wire, const int arg1 = 0x68, const int arg2 = 2);
              ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EmotiBit_BMI160/BMI160Gen.h:12:14: note:   no known conversion for argument 2 from 'const int' to 'TwoWire&'

arduino:mbed_nano:nanorp2040connect @ 2.7.2

Inclusion

Result: FAIL
This library has no main header file so an empty one was created.

/tmp/arduino-testlib3810629607/test/test.ino:1:10: fatal error: EmotiBit_BMI160.h: No such file or directory
 #include <EmotiBit_BMI160.h>
          ^~~~~~~~~~~~~~~~~~~
compilation terminated.

examples/Gyro

Result: PASS

Sketch uses 86372 bytes (0%) of program storage space. Maximum is 16777216 bytes.
Global variables use 44436 bytes (16%) of dynamic memory, leaving 225900 bytes for local variables. Maximum is 270336 bytes.

examples/Interrupt

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EmotiBit_BMI160/examples/Interrupt/Interrupt.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EmotiBit_BMI160/examples/Interrupt/Interrupt.ino:18:81: error: no matching function for call to 'BMI160GenClass::begin(BMI160GenClass::Mode, const int&, const int&)'
   BMI160.begin(BMI160GenClass::SPI_MODE, bmi160_select_pin, bmi160_interrupt_pin);
                                                                                 ^
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EmotiBit_BMI160/examples/Interrupt/Interrupt.ino:1:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EmotiBit_BMI160/BMI160Gen.h:11:14: note: candidate: bool BMI160GenClass::begin(int, int)
         bool begin(const int spi_cs_pin = 10, const int intr_pin = 2);
              ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EmotiBit_BMI160/BMI160Gen.h:11:14: note:   candidate expects 2 arguments, 3 provided
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EmotiBit_BMI160/BMI160Gen.h:12:14: note: candidate: bool BMI160GenClass::begin(BMI160GenClass::Mode, TwoWire&, int, int)
         bool begin(Mode mode, TwoWire &wirePort = Wire, const int arg1 = 0x68, const int arg2 = 2);
              ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EmotiBit_BMI160/BMI160Gen.h:12:14: note:   no known conversion for argument 2 from 'const int' to 'TwoWire& {aka arduino::MbedI2C&}'

arduino:megaavr:nona4809 @ 1.8.7

Inclusion

Result: FAIL
This library has no main header file so an empty one was created.

/tmp/arduino-testlib3810629607/test/test.ino:1:10: fatal error: EmotiBit_BMI160.h: No such file or directory
 #include <EmotiBit_BMI160.h>
          ^~~~~~~~~~~~~~~~~~~
compilation terminated.

examples/Gyro

Result: FAIL

examples/Interrupt

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EmotiBit_BMI160/examples/Interrupt/Interrupt.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EmotiBit_BMI160/examples/Interrupt/Interrupt.ino:18:81: error: no matching function for call to 'BMI160GenClass::begin(BMI160GenClass::Mode, const int&, const int&)'
   BMI160.begin(BMI160GenClass::SPI_MODE, bmi160_select_pin, bmi160_interrupt_pin);
                                                                                 ^
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EmotiBit_BMI160/examples/Interrupt/Interrupt.ino:1:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EmotiBit_BMI160/BMI160Gen.h:11:14: note: candidate: bool BMI160GenClass::begin(int, int)
         bool begin(const int spi_cs_pin = 10, const int intr_pin = 2);
              ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EmotiBit_BMI160/BMI160Gen.h:11:14: note:   candidate expects 2 arguments, 3 provided
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EmotiBit_BMI160/BMI160Gen.h:12:14: note: candidate: bool BMI160GenClass::begin(BMI160GenClass::Mode, TwoWire&, int, int)
         bool begin(Mode mode, TwoWire &wirePort = Wire, const int arg1 = 0x68, const int arg2 = 2);
              ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EmotiBit_BMI160/BMI160Gen.h:12:14: note:   no known conversion for argument 2 from 'const int' to 'TwoWire&'

arduino:samd:mkrwifi1010 @ 1.8.12

Inclusion

Result: FAIL
This library has no main header file so an empty one was created.

/tmp/arduino-testlib1185418340/test/test.ino:1:10: fatal error: EmotiBit_BMI160.h: No such file or directory
 #include <EmotiBit_BMI160.h>
          ^~~~~~~~~~~~~~~~~~~
compilation terminated.

examples/Gyro

Result: PASS

Sketch uses 25132 bytes (9%) of program storage space. Maximum is 262144 bytes.
Global variables use 3832 bytes (11%) of dynamic memory, leaving 28936 bytes for local variables. Maximum is 32768 bytes.

examples/Interrupt

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EmotiBit_BMI160/examples/Interrupt/Interrupt.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EmotiBit_BMI160/examples/Interrupt/Interrupt.ino:18:81: error: no matching function for call to 'BMI160GenClass::begin(BMI160GenClass::Mode, const int&, const int&)'
   BMI160.begin(BMI160GenClass::SPI_MODE, bmi160_select_pin, bmi160_interrupt_pin);
                                                                                 ^
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EmotiBit_BMI160/examples/Interrupt/Interrupt.ino:1:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EmotiBit_BMI160/BMI160Gen.h:11:14: note: candidate: bool BMI160GenClass::begin(int, int)
         bool begin(const int spi_cs_pin = 10, const int intr_pin = 2);
              ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EmotiBit_BMI160/BMI160Gen.h:11:14: note:   candidate expects 2 arguments, 3 provided
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EmotiBit_BMI160/BMI160Gen.h:12:14: note: candidate: bool BMI160GenClass::begin(BMI160GenClass::Mode, arduino::TwoWire&, int, int)
         bool begin(Mode mode, TwoWire &wirePort = Wire, const int arg1 = 0x68, const int arg2 = 2);
              ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EmotiBit_BMI160/BMI160Gen.h:12:14: note:   no known conversion for argument 2 from 'const int' to 'arduino::TwoWire&'

esp32:esp32:d1_mini32 @ 1.0.6

Inclusion

Result: FAIL
This library has no main header file so an empty one was created.

/tmp/arduino-testlib22929808/test/test.ino:1:29: fatal error: EmotiBit_BMI160.h: No such file or directory
compilation terminated.

examples/Gyro

Result: PASS

Sketch uses 223366 bytes (17%) of program storage space. Maximum is 1310720 bytes.
Global variables use 14264 bytes (4%) of dynamic memory, leaving 313416 bytes for local variables. Maximum is 327680 bytes.

examples/Interrupt

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EmotiBit_BMI160/examples/Interrupt/Interrupt.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EmotiBit_BMI160/examples/Interrupt/Interrupt.ino:18:81: error: invalid initialization of non-const reference of type 'TwoWire&' from an rvalue of type 'TwoWire'
   BMI160.begin(BMI160GenClass::SPI_MODE, bmi160_select_pin, bmi160_interrupt_pin);
                                                                                 ^
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EmotiBit_BMI160/BMI160Gen.h:6:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EmotiBit_BMI160/examples/Interrupt/Interrupt.ino:1:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/esp32/hardware/esp32/1.0.6/libraries/Wire/src/Wire.h:68:5: note:   after user-defined conversion: TwoWire::TwoWire(uint8_t)
     TwoWire(uint8_t bus_num);
     ^
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EmotiBit_BMI160/examples/Interrupt/Interrupt.ino:1:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EmotiBit_BMI160/BMI160Gen.h:12:14: note:   initializing argument 2 of 'bool BMI160GenClass::begin(BMI160GenClass::Mode, TwoWire&, int, int)'
         bool begin(Mode mode, TwoWire &wirePort = Wire, const int arg1 = 0x68, const int arg2 = 2);
              ^