EmotiBit MLX90632 - compatibility matrix

This report was generated on Wednesday, 23-Feb-22 22:48:15 CET using arduino-testlib.

EmotiBit MLX90632

Version: 1.0.8
More details

Compatibility matrix

Board	Claims compatibility	Inclusion	Example4-DebugPrinting	Example5-EEPROMWriting	Example9-AlgorithmTest	EmotiBit_Example1-Basic_Reading	EmotiBit_Example2-Changing_Refresh_Rate	EmotiBit_Example3-Continuous_Reading	Example3-BeginOptions
arduino:avr:uno 1.8.4	Yes	PASS	PASS	PASS	PASS	FAIL	FAIL	FAIL	FAIL
arduino:mbed_nano:nanorp2040connect 2.7.2	Yes	PASS	PASS	PASS	PASS	FAIL	FAIL	FAIL	FAIL
arduino:megaavr:nona4809 1.8.7	Yes	PASS	PASS	PASS	PASS	FAIL	FAIL	FAIL	FAIL
arduino:samd:mkrwifi1010 1.8.12	Yes	PASS	PASS	PASS	PASS	FAIL	FAIL	FAIL	FAIL
esp32:esp32:d1_mini32 1.0.6	Yes	PASS	PASS	PASS	PASS	FAIL	FAIL	FAIL	PASS

Compilation logs

arduino:avr:uno @ 1.8.4

Inclusion

Result: PASS

Sketch uses 2522 bytes (7%) of program storage space. Maximum is 32256 bytes.
Global variables use 297 bytes (14%) of dynamic memory, leaving 1751 bytes for local variables. Maximum is 2048 bytes.

examples/EmotiBit_Example1-Basic_Reading

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EmotiBit_MLX90632/examples/EmotiBit_Example1-Basic_Reading/EmotiBit_Example1-Basic_Reading.ino:13:17: error: 'sercom1' was not declared in this scope
 TwoWire myWire(&sercom1, 11, 13);
                 ^~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EmotiBit_MLX90632/examples/EmotiBit_Example1-Basic_Reading/EmotiBit_Example1-Basic_Reading.ino:13:17: note: suggested alternative: 'strcoll'
 TwoWire myWire(&sercom1, 11, 13);
                 ^~~~~~~
                 strcoll
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EmotiBit_MLX90632/examples/EmotiBit_Example1-Basic_Reading/EmotiBit_Example1-Basic_Reading.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EmotiBit_MLX90632/examples/EmotiBit_Example1-Basic_Reading/EmotiBit_Example1-Basic_Reading.ino:27:20: error: 'PIO_SERCOM' was not declared in this scope
  pinPeripheral(11, PIO_SERCOM);
                    ^~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EmotiBit_MLX90632/examples/EmotiBit_Example1-Basic_Reading/EmotiBit_Example1-Basic_Reading.ino:27:2: error: 'pinPeripheral' was not declared in this scope
  pinPeripheral(11, PIO_SERCOM);
  ^~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EmotiBit_MLX90632/examples/EmotiBit_Example1-Basic_Reading/EmotiBit_Example1-Basic_Reading.ino:42:30: error: 'EE_MEAS1' was not declared in this scope
  myTempSensor.readRegister16(EE_MEAS1, valueInMemory);
                              ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EmotiBit_MLX90632/examples/EmotiBit_Example1-Basic_Reading/EmotiBit_Example1-Basic_Reading.ino:42:30: note: suggested alternative: 'EE_Ea'
  myTempSensor.readRegister16(EE_MEAS1, valueInMemory);
                              ^~~~~~~~
                              EE_Ea
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EmotiBit_MLX90632/examples/EmotiBit_Example1-Basic_Reading/EmotiBit_Example1-Basic_Reading.ino:46:30: error: 'EE_MEAS2' was not declared in this scope
  myTempSensor.readRegister16(EE_MEAS2, valueInMemory);
                              ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EmotiBit_MLX90632/examples/EmotiBit_Example1-Basic_Reading/EmotiBit_Example1-Basic_Reading.ino:46:30: note: suggested alternative: 'EE_Ea'
  myTempSensor.readRegister16(EE_MEAS2, valueInMemory);
                              ^~~~~~~~
                              EE_Ea
Multiple libraries were found for "SparkFun_MLX90632_Arduino_Library.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_MLX90632_Noncontact_Infrared_Temperature_Sensor
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EmotiBit_MLX90632

examples/EmotiBit_Example2-Changing_Refresh_Rate

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EmotiBit_MLX90632/examples/EmotiBit_Example2-Changing_Refresh_Rate/EmotiBit_Example2-Changing_Refresh_Rate.ino:7:17: error: 'sercom1' was not declared in this scope
 TwoWire myWire(&sercom1, 11, 13);
                 ^~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EmotiBit_MLX90632/examples/EmotiBit_Example2-Changing_Refresh_Rate/EmotiBit_Example2-Changing_Refresh_Rate.ino:7:17: note: suggested alternative: 'strcoll'
 TwoWire myWire(&sercom1, 11, 13);
                 ^~~~~~~
                 strcoll
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EmotiBit_MLX90632/examples/EmotiBit_Example2-Changing_Refresh_Rate/EmotiBit_Example2-Changing_Refresh_Rate.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EmotiBit_MLX90632/examples/EmotiBit_Example2-Changing_Refresh_Rate/EmotiBit_Example2-Changing_Refresh_Rate.ino:16:20: error: 'PIO_SERCOM' was not declared in this scope
  pinPeripheral(11, PIO_SERCOM);
                    ^~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EmotiBit_MLX90632/examples/EmotiBit_Example2-Changing_Refresh_Rate/EmotiBit_Example2-Changing_Refresh_Rate.ino:16:2: error: 'pinPeripheral' was not declared in this scope
  pinPeripheral(11, PIO_SERCOM);
  ^~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EmotiBit_MLX90632/examples/EmotiBit_Example2-Changing_Refresh_Rate/EmotiBit_Example2-Changing_Refresh_Rate.ino:26:30: error: 'EE_MEAS1' was not declared in this scope
  myTempSensor.readRegister16(EE_MEAS1, read_meas1);
                              ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EmotiBit_MLX90632/examples/EmotiBit_Example2-Changing_Refresh_Rate/EmotiBit_Example2-Changing_Refresh_Rate.ino:26:30: note: suggested alternative: 'EE_Ea'
  myTempSensor.readRegister16(EE_MEAS1, read_meas1);
                              ^~~~~~~~
                              EE_Ea
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EmotiBit_MLX90632/examples/EmotiBit_Example2-Changing_Refresh_Rate/EmotiBit_Example2-Changing_Refresh_Rate.ino:27:30: error: 'EE_MEAS2' was not declared in this scope
  myTempSensor.readRegister16(EE_MEAS2, read_meas2);
                              ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EmotiBit_MLX90632/examples/EmotiBit_Example2-Changing_Refresh_Rate/EmotiBit_Example2-Changing_Refresh_Rate.ino:27:30: note: suggested alternative: 'EE_Ea'
  myTempSensor.readRegister16(EE_MEAS2, read_meas2);
                              ^~~~~~~~
                              EE_Ea
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EmotiBit_MLX90632/examples/EmotiBit_Example2-Changing_Refresh_Rate/EmotiBit_Example2-Changing_Refresh_Rate.ino:33:15: error: 'class MLX90632' has no member named 'setMeasurementRate'
  myTempSensor.setMeasurementRate(8);
               ^~~~~~~~~~~~~~~~~~
Multiple libraries were found for "SparkFun_MLX90632_Arduino_Library.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_MLX90632_Noncontact_Infrared_Temperature_Sensor
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EmotiBit_MLX90632

examples/EmotiBit_Example3-Continuous_Reading

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EmotiBit_MLX90632/examples/EmotiBit_Example3-Continuous_Reading/EmotiBit_Example3-Continuous_Reading.ino:13:17: error: 'sercom1' was not declared in this scope
 TwoWire myWire(&sercom1, 11, 13);
                 ^~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EmotiBit_MLX90632/examples/EmotiBit_Example3-Continuous_Reading/EmotiBit_Example3-Continuous_Reading.ino:13:17: note: suggested alternative: 'strcoll'
 TwoWire myWire(&sercom1, 11, 13);
                 ^~~~~~~
                 strcoll
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EmotiBit_MLX90632/examples/EmotiBit_Example3-Continuous_Reading/EmotiBit_Example3-Continuous_Reading.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EmotiBit_MLX90632/examples/EmotiBit_Example3-Continuous_Reading/EmotiBit_Example3-Continuous_Reading.ino:27:20: error: 'PIO_SERCOM' was not declared in this scope
  pinPeripheral(11, PIO_SERCOM);
                    ^~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EmotiBit_MLX90632/examples/EmotiBit_Example3-Continuous_Reading/EmotiBit_Example3-Continuous_Reading.ino:27:2: error: 'pinPeripheral' was not declared in this scope
  pinPeripheral(11, PIO_SERCOM);
  ^~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EmotiBit_MLX90632/examples/EmotiBit_Example3-Continuous_Reading/EmotiBit_Example3-Continuous_Reading.ino:57:30: error: 'EE_MEAS1' was not declared in this scope
  myTempSensor.readRegister16(EE_MEAS1, valueInMemory);
                              ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EmotiBit_MLX90632/examples/EmotiBit_Example3-Continuous_Reading/EmotiBit_Example3-Continuous_Reading.ino:57:30: note: suggested alternative: 'EE_Ea'
  myTempSensor.readRegister16(EE_MEAS1, valueInMemory);
                              ^~~~~~~~
                              EE_Ea
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EmotiBit_MLX90632/examples/EmotiBit_Example3-Continuous_Reading/EmotiBit_Example3-Continuous_Reading.ino:61:30: error: 'EE_MEAS2' was not declared in this scope
  myTempSensor.readRegister16(EE_MEAS2, valueInMemory);
                              ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EmotiBit_MLX90632/examples/EmotiBit_Example3-Continuous_Reading/EmotiBit_Example3-Continuous_Reading.ino:61:30: note: suggested alternative: 'EE_Ea'
  myTempSensor.readRegister16(EE_MEAS2, valueInMemory);
                              ^~~~~~~~
                              EE_Ea
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EmotiBit_MLX90632/examples/EmotiBit_Example3-Continuous_Reading/EmotiBit_Example3-Continuous_Reading.ino: In function 'void loop()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EmotiBit_MLX90632/examples/EmotiBit_Example3-Continuous_Reading/EmotiBit_Example3-Continuous_Reading.ino:82:31: error: 'SENSOR_NO_NEW_DATA' is not a member of 'MLX90632::status'
  myStatus = MLX90632::status::SENSOR_NO_NEW_DATA;
                               ^~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EmotiBit_MLX90632/examples/EmotiBit_Example3-Continuous_Reading/EmotiBit_Example3-Continuous_Reading.ino:87:29: error: 'class MLX90632' has no member named 'end_getObjectTemp'; did you mean 'getObjectTemp'?
   objectTemp = myTempSensor.end_getObjectTemp(myStatus); //Get the temperature of the object we're looking at in C
                             ^~~~~~~~~~~~~~~~~
                             getObjectTemp
Multiple libraries were found for "SparkFun_MLX90632_Arduino_Library.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_MLX90632_Noncontact_Infrared_Temperature_Sensor
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EmotiBit_MLX90632

examples/Example3-BeginOptions

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EmotiBit_MLX90632/examples/Example3-BeginOptions/Example3-BeginOptions.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EmotiBit_MLX90632/examples/Example3-BeginOptions/Example3-BeginOptions.ino:32:3: error: 'Wire1' was not declared in this scope
   Wire1.begin();
   ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EmotiBit_MLX90632/examples/Example3-BeginOptions/Example3-BeginOptions.ino:32:3: note: suggested alternative: 'Wire'
   Wire1.begin();
   ^~~~~
   Wire
Multiple libraries were found for "SparkFun_MLX90632_Arduino_Library.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_MLX90632_Noncontact_Infrared_Temperature_Sensor
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EmotiBit_MLX90632

examples/Example4-DebugPrinting

Result: PASS

Sketch uses 12306 bytes (38%) of program storage space. Maximum is 32256 bytes.
Global variables use 524 bytes (25%) of dynamic memory, leaving 1524 bytes for local variables. Maximum is 2048 bytes.

examples/Example5-EEPROMWriting

Result: PASS

Sketch uses 9260 bytes (28%) of program storage space. Maximum is 32256 bytes.
Global variables use 576 bytes (28%) of dynamic memory, leaving 1472 bytes for local variables. Maximum is 2048 bytes.

examples/Example9-AlgorithmTest

Result: PASS

Sketch uses 5240 bytes (16%) of program storage space. Maximum is 32256 bytes.
Global variables use 514 bytes (25%) of dynamic memory, leaving 1534 bytes for local variables. Maximum is 2048 bytes.

arduino:mbed_nano:nanorp2040connect @ 2.7.2

Inclusion

Result: PASS

Sketch uses 81706 bytes (0%) of program storage space. Maximum is 16777216 bytes.
Global variables use 44220 bytes (16%) of dynamic memory, leaving 226116 bytes for local variables. Maximum is 270336 bytes.

examples/EmotiBit_Example1-Basic_Reading

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EmotiBit_MLX90632/examples/EmotiBit_Example1-Basic_Reading/EmotiBit_Example1-Basic_Reading.ino:13:17: error: 'sercom1' was not declared in this scope
 TwoWire myWire(&sercom1, 11, 13);
                 ^~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EmotiBit_MLX90632/examples/EmotiBit_Example1-Basic_Reading/EmotiBit_Example1-Basic_Reading.ino:13:17: note: suggested alternative: 'strcoll'
 TwoWire myWire(&sercom1, 11, 13);
                 ^~~~~~~
                 strcoll
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EmotiBit_MLX90632/examples/EmotiBit_Example1-Basic_Reading/EmotiBit_Example1-Basic_Reading.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EmotiBit_MLX90632/examples/EmotiBit_Example1-Basic_Reading/EmotiBit_Example1-Basic_Reading.ino:27:20: error: 'PIO_SERCOM' was not declared in this scope
  pinPeripheral(11, PIO_SERCOM);
                    ^~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EmotiBit_MLX90632/examples/EmotiBit_Example1-Basic_Reading/EmotiBit_Example1-Basic_Reading.ino:27:2: error: 'pinPeripheral' was not declared in this scope
  pinPeripheral(11, PIO_SERCOM);
  ^~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EmotiBit_MLX90632/examples/EmotiBit_Example1-Basic_Reading/EmotiBit_Example1-Basic_Reading.ino:27:2: note: suggested alternative: 'pinmap_peripheral'
  pinPeripheral(11, PIO_SERCOM);
  ^~~~~~~~~~~~~
  pinmap_peripheral
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EmotiBit_MLX90632/examples/EmotiBit_Example1-Basic_Reading/EmotiBit_Example1-Basic_Reading.ino:42:30: error: 'EE_MEAS1' was not declared in this scope
  myTempSensor.readRegister16(EE_MEAS1, valueInMemory);
                              ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EmotiBit_MLX90632/examples/EmotiBit_Example1-Basic_Reading/EmotiBit_Example1-Basic_Reading.ino:42:30: note: suggested alternative: 'EE_Eb'
  myTempSensor.readRegister16(EE_MEAS1, valueInMemory);
                              ^~~~~~~~
                              EE_Eb
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EmotiBit_MLX90632/examples/EmotiBit_Example1-Basic_Reading/EmotiBit_Example1-Basic_Reading.ino:46:30: error: 'EE_MEAS2' was not declared in this scope
  myTempSensor.readRegister16(EE_MEAS2, valueInMemory);
                              ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EmotiBit_MLX90632/examples/EmotiBit_Example1-Basic_Reading/EmotiBit_Example1-Basic_Reading.ino:46:30: note: suggested alternative: 'EE_Eb'
  myTempSensor.readRegister16(EE_MEAS2, valueInMemory);
                              ^~~~~~~~
                              EE_Eb
Multiple libraries were found for "SparkFun_MLX90632_Arduino_Library.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_MLX90632_Noncontact_Infrared_Temperature_Sensor
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EmotiBit_MLX90632

examples/EmotiBit_Example2-Changing_Refresh_Rate

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EmotiBit_MLX90632/examples/EmotiBit_Example2-Changing_Refresh_Rate/EmotiBit_Example2-Changing_Refresh_Rate.ino:7:17: error: 'sercom1' was not declared in this scope
 TwoWire myWire(&sercom1, 11, 13);
                 ^~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EmotiBit_MLX90632/examples/EmotiBit_Example2-Changing_Refresh_Rate/EmotiBit_Example2-Changing_Refresh_Rate.ino:7:17: note: suggested alternative: 'strcoll'
 TwoWire myWire(&sercom1, 11, 13);
                 ^~~~~~~
                 strcoll
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EmotiBit_MLX90632/examples/EmotiBit_Example2-Changing_Refresh_Rate/EmotiBit_Example2-Changing_Refresh_Rate.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EmotiBit_MLX90632/examples/EmotiBit_Example2-Changing_Refresh_Rate/EmotiBit_Example2-Changing_Refresh_Rate.ino:16:20: error: 'PIO_SERCOM' was not declared in this scope
  pinPeripheral(11, PIO_SERCOM);
                    ^~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EmotiBit_MLX90632/examples/EmotiBit_Example2-Changing_Refresh_Rate/EmotiBit_Example2-Changing_Refresh_Rate.ino:16:2: error: 'pinPeripheral' was not declared in this scope
  pinPeripheral(11, PIO_SERCOM);
  ^~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EmotiBit_MLX90632/examples/EmotiBit_Example2-Changing_Refresh_Rate/EmotiBit_Example2-Changing_Refresh_Rate.ino:16:2: note: suggested alternative: 'pinmap_peripheral'
  pinPeripheral(11, PIO_SERCOM);
  ^~~~~~~~~~~~~
  pinmap_peripheral
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EmotiBit_MLX90632/examples/EmotiBit_Example2-Changing_Refresh_Rate/EmotiBit_Example2-Changing_Refresh_Rate.ino:26:30: error: 'EE_MEAS1' was not declared in this scope
  myTempSensor.readRegister16(EE_MEAS1, read_meas1);
                              ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EmotiBit_MLX90632/examples/EmotiBit_Example2-Changing_Refresh_Rate/EmotiBit_Example2-Changing_Refresh_Rate.ino:26:30: note: suggested alternative: 'EE_Eb'
  myTempSensor.readRegister16(EE_MEAS1, read_meas1);
                              ^~~~~~~~
                              EE_Eb
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EmotiBit_MLX90632/examples/EmotiBit_Example2-Changing_Refresh_Rate/EmotiBit_Example2-Changing_Refresh_Rate.ino:27:30: error: 'EE_MEAS2' was not declared in this scope
  myTempSensor.readRegister16(EE_MEAS2, read_meas2);
                              ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EmotiBit_MLX90632/examples/EmotiBit_Example2-Changing_Refresh_Rate/EmotiBit_Example2-Changing_Refresh_Rate.ino:27:30: note: suggested alternative: 'EE_Eb'
  myTempSensor.readRegister16(EE_MEAS2, read_meas2);
                              ^~~~~~~~
                              EE_Eb
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EmotiBit_MLX90632/examples/EmotiBit_Example2-Changing_Refresh_Rate/EmotiBit_Example2-Changing_Refresh_Rate.ino:33:15: error: 'class MLX90632' has no member named 'setMeasurementRate'
  myTempSensor.setMeasurementRate(8);
               ^~~~~~~~~~~~~~~~~~
Multiple libraries were found for "SparkFun_MLX90632_Arduino_Library.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_MLX90632_Noncontact_Infrared_Temperature_Sensor
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EmotiBit_MLX90632

examples/EmotiBit_Example3-Continuous_Reading

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EmotiBit_MLX90632/examples/EmotiBit_Example3-Continuous_Reading/EmotiBit_Example3-Continuous_Reading.ino:13:17: error: 'sercom1' was not declared in this scope
 TwoWire myWire(&sercom1, 11, 13);
                 ^~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EmotiBit_MLX90632/examples/EmotiBit_Example3-Continuous_Reading/EmotiBit_Example3-Continuous_Reading.ino:13:17: note: suggested alternative: 'strcoll'
 TwoWire myWire(&sercom1, 11, 13);
                 ^~~~~~~
                 strcoll
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EmotiBit_MLX90632/examples/EmotiBit_Example3-Continuous_Reading/EmotiBit_Example3-Continuous_Reading.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EmotiBit_MLX90632/examples/EmotiBit_Example3-Continuous_Reading/EmotiBit_Example3-Continuous_Reading.ino:27:20: error: 'PIO_SERCOM' was not declared in this scope
  pinPeripheral(11, PIO_SERCOM);
                    ^~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EmotiBit_MLX90632/examples/EmotiBit_Example3-Continuous_Reading/EmotiBit_Example3-Continuous_Reading.ino:27:2: error: 'pinPeripheral' was not declared in this scope
  pinPeripheral(11, PIO_SERCOM);
  ^~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EmotiBit_MLX90632/examples/EmotiBit_Example3-Continuous_Reading/EmotiBit_Example3-Continuous_Reading.ino:27:2: note: suggested alternative: 'pinmap_peripheral'
  pinPeripheral(11, PIO_SERCOM);
  ^~~~~~~~~~~~~
  pinmap_peripheral
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EmotiBit_MLX90632/examples/EmotiBit_Example3-Continuous_Reading/EmotiBit_Example3-Continuous_Reading.ino:57:30: error: 'EE_MEAS1' was not declared in this scope
  myTempSensor.readRegister16(EE_MEAS1, valueInMemory);
                              ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EmotiBit_MLX90632/examples/EmotiBit_Example3-Continuous_Reading/EmotiBit_Example3-Continuous_Reading.ino:57:30: note: suggested alternative: 'EE_Eb'
  myTempSensor.readRegister16(EE_MEAS1, valueInMemory);
                              ^~~~~~~~
                              EE_Eb
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EmotiBit_MLX90632/examples/EmotiBit_Example3-Continuous_Reading/EmotiBit_Example3-Continuous_Reading.ino:61:30: error: 'EE_MEAS2' was not declared in this scope
  myTempSensor.readRegister16(EE_MEAS2, valueInMemory);
                              ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EmotiBit_MLX90632/examples/EmotiBit_Example3-Continuous_Reading/EmotiBit_Example3-Continuous_Reading.ino:61:30: note: suggested alternative: 'EE_Eb'
  myTempSensor.readRegister16(EE_MEAS2, valueInMemory);
                              ^~~~~~~~
                              EE_Eb
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EmotiBit_MLX90632/examples/EmotiBit_Example3-Continuous_Reading/EmotiBit_Example3-Continuous_Reading.ino: In function 'void loop()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EmotiBit_MLX90632/examples/EmotiBit_Example3-Continuous_Reading/EmotiBit_Example3-Continuous_Reading.ino:82:31: error: 'SENSOR_NO_NEW_DATA' is not a member of 'MLX90632::status'
  myStatus = MLX90632::status::SENSOR_NO_NEW_DATA;
                               ^~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EmotiBit_MLX90632/examples/EmotiBit_Example3-Continuous_Reading/EmotiBit_Example3-Continuous_Reading.ino:87:29: error: 'class MLX90632' has no member named 'end_getObjectTemp'; did you mean 'getObjectTemp'?
   objectTemp = myTempSensor.end_getObjectTemp(myStatus); //Get the temperature of the object we're looking at in C
                             ^~~~~~~~~~~~~~~~~
                             getObjectTemp
Multiple libraries were found for "SparkFun_MLX90632_Arduino_Library.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_MLX90632_Noncontact_Infrared_Temperature_Sensor
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EmotiBit_MLX90632

examples/Example3-BeginOptions

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EmotiBit_MLX90632/examples/Example3-BeginOptions/Example3-BeginOptions.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EmotiBit_MLX90632/examples/Example3-BeginOptions/Example3-BeginOptions.ino:32:3: error: 'Wire1' was not declared in this scope
   Wire1.begin();
   ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EmotiBit_MLX90632/examples/Example3-BeginOptions/Example3-BeginOptions.ino:32:3: note: suggested alternative: 'Wire'
   Wire1.begin();
   ^~~~~
   Wire
Multiple libraries were found for "SparkFun_MLX90632_Arduino_Library.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_MLX90632_Noncontact_Infrared_Temperature_Sensor
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EmotiBit_MLX90632

examples/Example4-DebugPrinting

Result: PASS

Sketch uses 91792 bytes (0%) of program storage space. Maximum is 16777216 bytes.
Global variables use 44360 bytes (16%) of dynamic memory, leaving 225976 bytes for local variables. Maximum is 270336 bytes.

examples/Example5-EEPROMWriting

Result: PASS

Sketch uses 84358 bytes (0%) of program storage space. Maximum is 16777216 bytes.
Global variables use 44344 bytes (16%) of dynamic memory, leaving 225992 bytes for local variables. Maximum is 270336 bytes.

examples/Example9-AlgorithmTest

Result: PASS

Sketch uses 84810 bytes (0%) of program storage space. Maximum is 16777216 bytes.
Global variables use 43444 bytes (16%) of dynamic memory, leaving 226892 bytes for local variables. Maximum is 270336 bytes.

arduino:megaavr:nona4809 @ 1.8.7

Inclusion

Result: PASS

Sketch uses 4640 bytes (9%) of program storage space. Maximum is 49152 bytes.
Global variables use 472 bytes (7%) of dynamic memory, leaving 5672 bytes for local variables. Maximum is 6144 bytes.
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EmotiBit_MLX90632/src/SparkFun_MLX90632_Arduino_Library.h:36:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EmotiBit_MLX90632/src/SparkFun_MLX90632_Arduino_Library.cpp:55:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h: In member function 'MLX90632::status MLX90632::readRegister16(uint16_t, uint16_t&)':
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:63:12: note: candidate 1: size_t TwoWire::requestFrom(int, int)
     size_t requestFrom(int, int);
            ^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:61:12: note: candidate 2: virtual size_t TwoWire::requestFrom(uint8_t, size_t)
     size_t requestFrom(uint8_t, size_t);
            ^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h: In member function 'MLX90632::status MLX90632::readRegister32(uint16_t, uint32_t&)':
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:63:12: note: candidate 1: size_t TwoWire::requestFrom(int, int)
     size_t requestFrom(int, int);
            ^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:61:12: note: candidate 2: virtual size_t TwoWire::requestFrom(uint8_t, size_t)
     size_t requestFrom(uint8_t, size_t);
            ^~~~~~~~~~~

examples/EmotiBit_Example1-Basic_Reading

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EmotiBit_MLX90632/examples/EmotiBit_Example1-Basic_Reading/EmotiBit_Example1-Basic_Reading.ino:13:17: error: 'sercom1' was not declared in this scope
 TwoWire myWire(&sercom1, 11, 13);
                 ^~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EmotiBit_MLX90632/examples/EmotiBit_Example1-Basic_Reading/EmotiBit_Example1-Basic_Reading.ino:13:17: note: suggested alternative: 'strcoll'
 TwoWire myWire(&sercom1, 11, 13);
                 ^~~~~~~
                 strcoll
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EmotiBit_MLX90632/examples/EmotiBit_Example1-Basic_Reading/EmotiBit_Example1-Basic_Reading.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EmotiBit_MLX90632/examples/EmotiBit_Example1-Basic_Reading/EmotiBit_Example1-Basic_Reading.ino:27:20: error: 'PIO_SERCOM' was not declared in this scope
  pinPeripheral(11, PIO_SERCOM);
                    ^~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EmotiBit_MLX90632/examples/EmotiBit_Example1-Basic_Reading/EmotiBit_Example1-Basic_Reading.ino:27:2: error: 'pinPeripheral' was not declared in this scope
  pinPeripheral(11, PIO_SERCOM);
  ^~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EmotiBit_MLX90632/examples/EmotiBit_Example1-Basic_Reading/EmotiBit_Example1-Basic_Reading.ino:42:30: error: 'EE_MEAS1' was not declared in this scope
  myTempSensor.readRegister16(EE_MEAS1, valueInMemory);
                              ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EmotiBit_MLX90632/examples/EmotiBit_Example1-Basic_Reading/EmotiBit_Example1-Basic_Reading.ino:42:30: note: suggested alternative: 'EE_Ab'
  myTempSensor.readRegister16(EE_MEAS1, valueInMemory);
                              ^~~~~~~~
                              EE_Ab
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EmotiBit_MLX90632/examples/EmotiBit_Example1-Basic_Reading/EmotiBit_Example1-Basic_Reading.ino:46:30: error: 'EE_MEAS2' was not declared in this scope
  myTempSensor.readRegister16(EE_MEAS2, valueInMemory);
                              ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EmotiBit_MLX90632/examples/EmotiBit_Example1-Basic_Reading/EmotiBit_Example1-Basic_Reading.ino:46:30: note: suggested alternative: 'EE_Ab'
  myTempSensor.readRegister16(EE_MEAS2, valueInMemory);
                              ^~~~~~~~
                              EE_Ab
Multiple libraries were found for "SparkFun_MLX90632_Arduino_Library.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_MLX90632_Noncontact_Infrared_Temperature_Sensor
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EmotiBit_MLX90632

examples/EmotiBit_Example2-Changing_Refresh_Rate

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EmotiBit_MLX90632/examples/EmotiBit_Example2-Changing_Refresh_Rate/EmotiBit_Example2-Changing_Refresh_Rate.ino:7:17: error: 'sercom1' was not declared in this scope
 TwoWire myWire(&sercom1, 11, 13);
                 ^~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EmotiBit_MLX90632/examples/EmotiBit_Example2-Changing_Refresh_Rate/EmotiBit_Example2-Changing_Refresh_Rate.ino:7:17: note: suggested alternative: 'strcoll'
 TwoWire myWire(&sercom1, 11, 13);
                 ^~~~~~~
                 strcoll
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EmotiBit_MLX90632/examples/EmotiBit_Example2-Changing_Refresh_Rate/EmotiBit_Example2-Changing_Refresh_Rate.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EmotiBit_MLX90632/examples/EmotiBit_Example2-Changing_Refresh_Rate/EmotiBit_Example2-Changing_Refresh_Rate.ino:16:20: error: 'PIO_SERCOM' was not declared in this scope
  pinPeripheral(11, PIO_SERCOM);
                    ^~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EmotiBit_MLX90632/examples/EmotiBit_Example2-Changing_Refresh_Rate/EmotiBit_Example2-Changing_Refresh_Rate.ino:16:2: error: 'pinPeripheral' was not declared in this scope
  pinPeripheral(11, PIO_SERCOM);
  ^~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EmotiBit_MLX90632/examples/EmotiBit_Example2-Changing_Refresh_Rate/EmotiBit_Example2-Changing_Refresh_Rate.ino:26:30: error: 'EE_MEAS1' was not declared in this scope
  myTempSensor.readRegister16(EE_MEAS1, read_meas1);
                              ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EmotiBit_MLX90632/examples/EmotiBit_Example2-Changing_Refresh_Rate/EmotiBit_Example2-Changing_Refresh_Rate.ino:26:30: note: suggested alternative: 'EE_Ab'
  myTempSensor.readRegister16(EE_MEAS1, read_meas1);
                              ^~~~~~~~
                              EE_Ab
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EmotiBit_MLX90632/examples/EmotiBit_Example2-Changing_Refresh_Rate/EmotiBit_Example2-Changing_Refresh_Rate.ino:27:30: error: 'EE_MEAS2' was not declared in this scope
  myTempSensor.readRegister16(EE_MEAS2, read_meas2);
                              ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EmotiBit_MLX90632/examples/EmotiBit_Example2-Changing_Refresh_Rate/EmotiBit_Example2-Changing_Refresh_Rate.ino:27:30: note: suggested alternative: 'EE_Ab'
  myTempSensor.readRegister16(EE_MEAS2, read_meas2);
                              ^~~~~~~~
                              EE_Ab
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EmotiBit_MLX90632/examples/EmotiBit_Example2-Changing_Refresh_Rate/EmotiBit_Example2-Changing_Refresh_Rate.ino:33:15: error: 'class MLX90632' has no member named 'setMeasurementRate'
  myTempSensor.setMeasurementRate(8);
               ^~~~~~~~~~~~~~~~~~
Multiple libraries were found for "SparkFun_MLX90632_Arduino_Library.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_MLX90632_Noncontact_Infrared_Temperature_Sensor
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EmotiBit_MLX90632

examples/EmotiBit_Example3-Continuous_Reading

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EmotiBit_MLX90632/examples/EmotiBit_Example3-Continuous_Reading/EmotiBit_Example3-Continuous_Reading.ino:13:17: error: 'sercom1' was not declared in this scope
 TwoWire myWire(&sercom1, 11, 13);
                 ^~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EmotiBit_MLX90632/examples/EmotiBit_Example3-Continuous_Reading/EmotiBit_Example3-Continuous_Reading.ino:13:17: note: suggested alternative: 'strcoll'
 TwoWire myWire(&sercom1, 11, 13);
                 ^~~~~~~
                 strcoll
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EmotiBit_MLX90632/examples/EmotiBit_Example3-Continuous_Reading/EmotiBit_Example3-Continuous_Reading.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EmotiBit_MLX90632/examples/EmotiBit_Example3-Continuous_Reading/EmotiBit_Example3-Continuous_Reading.ino:27:20: error: 'PIO_SERCOM' was not declared in this scope
  pinPeripheral(11, PIO_SERCOM);
                    ^~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EmotiBit_MLX90632/examples/EmotiBit_Example3-Continuous_Reading/EmotiBit_Example3-Continuous_Reading.ino:27:2: error: 'pinPeripheral' was not declared in this scope
  pinPeripheral(11, PIO_SERCOM);
  ^~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EmotiBit_MLX90632/examples/EmotiBit_Example3-Continuous_Reading/EmotiBit_Example3-Continuous_Reading.ino:57:30: error: 'EE_MEAS1' was not declared in this scope
  myTempSensor.readRegister16(EE_MEAS1, valueInMemory);
                              ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EmotiBit_MLX90632/examples/EmotiBit_Example3-Continuous_Reading/EmotiBit_Example3-Continuous_Reading.ino:57:30: note: suggested alternative: 'EE_Ab'
  myTempSensor.readRegister16(EE_MEAS1, valueInMemory);
                              ^~~~~~~~
                              EE_Ab
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EmotiBit_MLX90632/examples/EmotiBit_Example3-Continuous_Reading/EmotiBit_Example3-Continuous_Reading.ino:61:30: error: 'EE_MEAS2' was not declared in this scope
  myTempSensor.readRegister16(EE_MEAS2, valueInMemory);
                              ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EmotiBit_MLX90632/examples/EmotiBit_Example3-Continuous_Reading/EmotiBit_Example3-Continuous_Reading.ino:61:30: note: suggested alternative: 'EE_Ab'
  myTempSensor.readRegister16(EE_MEAS2, valueInMemory);
                              ^~~~~~~~
                              EE_Ab
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EmotiBit_MLX90632/examples/EmotiBit_Example3-Continuous_Reading/EmotiBit_Example3-Continuous_Reading.ino: In function 'void loop()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EmotiBit_MLX90632/examples/EmotiBit_Example3-Continuous_Reading/EmotiBit_Example3-Continuous_Reading.ino:82:31: error: 'SENSOR_NO_NEW_DATA' is not a member of 'MLX90632::status'
  myStatus = MLX90632::status::SENSOR_NO_NEW_DATA;
                               ^~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EmotiBit_MLX90632/examples/EmotiBit_Example3-Continuous_Reading/EmotiBit_Example3-Continuous_Reading.ino:87:29: error: 'class MLX90632' has no member named 'end_getObjectTemp'; did you mean 'getObjectTemp'?
   objectTemp = myTempSensor.end_getObjectTemp(myStatus); //Get the temperature of the object we're looking at in C
                             ^~~~~~~~~~~~~~~~~
                             getObjectTemp
Multiple libraries were found for "SparkFun_MLX90632_Arduino_Library.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_MLX90632_Noncontact_Infrared_Temperature_Sensor
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EmotiBit_MLX90632

examples/Example3-BeginOptions

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EmotiBit_MLX90632/examples/Example3-BeginOptions/Example3-BeginOptions.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EmotiBit_MLX90632/examples/Example3-BeginOptions/Example3-BeginOptions.ino:32:3: error: 'Wire1' was not declared in this scope
   Wire1.begin();
   ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EmotiBit_MLX90632/examples/Example3-BeginOptions/Example3-BeginOptions.ino:32:3: note: suggested alternative: 'Wire'
   Wire1.begin();
   ^~~~~
   Wire
Multiple libraries were found for "SparkFun_MLX90632_Arduino_Library.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_MLX90632_Noncontact_Infrared_Temperature_Sensor
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EmotiBit_MLX90632

examples/Example4-DebugPrinting

Result: PASS

Sketch uses 13283 bytes (27%) of program storage space. Maximum is 49152 bytes.
Global variables use 546 bytes (8%) of dynamic memory, leaving 5598 bytes for local variables. Maximum is 6144 bytes.
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_MLX90632_Noncontact_Infrared_Temperature_Sensor/src/SparkFun_MLX90632_Arduino_Library.h:36:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_MLX90632_Noncontact_Infrared_Temperature_Sensor/src/SparkFun_MLX90632_Arduino_Library.cpp:55:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h: In member function 'MLX90632::status MLX90632::readRegister16(uint16_t, uint16_t&)':
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:63:12: note: candidate 1: size_t TwoWire::requestFrom(int, int)
     size_t requestFrom(int, int);
            ^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:61:12: note: candidate 2: virtual size_t TwoWire::requestFrom(uint8_t, size_t)
     size_t requestFrom(uint8_t, size_t);
            ^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h: In member function 'MLX90632::status MLX90632::readRegister32(uint16_t, uint32_t&)':
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:63:12: note: candidate 1: size_t TwoWire::requestFrom(int, int)
     size_t requestFrom(int, int);
            ^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:61:12: note: candidate 2: virtual size_t TwoWire::requestFrom(uint8_t, size_t)
     size_t requestFrom(uint8_t, size_t);
            ^~~~~~~~~~~

examples/Example5-EEPROMWriting

Result: PASS

Sketch uses 10201 bytes (20%) of program storage space. Maximum is 49152 bytes.
Global variables use 542 bytes (8%) of dynamic memory, leaving 5602 bytes for local variables. Maximum is 6144 bytes.
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_MLX90632_Noncontact_Infrared_Temperature_Sensor/src/SparkFun_MLX90632_Arduino_Library.h:36:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_MLX90632_Noncontact_Infrared_Temperature_Sensor/src/SparkFun_MLX90632_Arduino_Library.cpp:55:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h: In member function 'MLX90632::status MLX90632::readRegister16(uint16_t, uint16_t&)':
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:63:12: note: candidate 1: size_t TwoWire::requestFrom(int, int)
     size_t requestFrom(int, int);
            ^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:61:12: note: candidate 2: virtual size_t TwoWire::requestFrom(uint8_t, size_t)
     size_t requestFrom(uint8_t, size_t);
            ^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h: In member function 'MLX90632::status MLX90632::readRegister32(uint16_t, uint32_t&)':
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:63:12: note: candidate 1: size_t TwoWire::requestFrom(int, int)
     size_t requestFrom(int, int);
            ^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:61:12: note: candidate 2: virtual size_t TwoWire::requestFrom(uint8_t, size_t)
     size_t requestFrom(uint8_t, size_t);
            ^~~~~~~~~~~

examples/Example9-AlgorithmTest

Result: PASS

Sketch uses 6359 bytes (12%) of program storage space. Maximum is 49152 bytes.
Global variables use 177 bytes (2%) of dynamic memory, leaving 5967 bytes for local variables. Maximum is 6144 bytes.

arduino:samd:mkrwifi1010 @ 1.8.12

Inclusion

Result: PASS

Sketch uses 13584 bytes (5%) of program storage space. Maximum is 262144 bytes.
Global variables use 3568 bytes (10%) of dynamic memory, leaving 29200 bytes for local variables. Maximum is 32768 bytes.

examples/EmotiBit_Example1-Basic_Reading

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EmotiBit_MLX90632/examples/EmotiBit_Example1-Basic_Reading/EmotiBit_Example1-Basic_Reading.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EmotiBit_MLX90632/examples/EmotiBit_Example1-Basic_Reading/EmotiBit_Example1-Basic_Reading.ino:42:30: error: 'EE_MEAS1' was not declared in this scope
  myTempSensor.readRegister16(EE_MEAS1, valueInMemory);
                              ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EmotiBit_MLX90632/examples/EmotiBit_Example1-Basic_Reading/EmotiBit_Example1-Basic_Reading.ino:42:30: note: suggested alternative: 'EE_Aa'
  myTempSensor.readRegister16(EE_MEAS1, valueInMemory);
                              ^~~~~~~~
                              EE_Aa
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EmotiBit_MLX90632/examples/EmotiBit_Example1-Basic_Reading/EmotiBit_Example1-Basic_Reading.ino:46:30: error: 'EE_MEAS2' was not declared in this scope
  myTempSensor.readRegister16(EE_MEAS2, valueInMemory);
                              ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EmotiBit_MLX90632/examples/EmotiBit_Example1-Basic_Reading/EmotiBit_Example1-Basic_Reading.ino:46:30: note: suggested alternative: 'EE_Aa'
  myTempSensor.readRegister16(EE_MEAS2, valueInMemory);
                              ^~~~~~~~
                              EE_Aa
Multiple libraries were found for "SparkFun_MLX90632_Arduino_Library.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_MLX90632_Noncontact_Infrared_Temperature_Sensor
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EmotiBit_MLX90632

examples/EmotiBit_Example2-Changing_Refresh_Rate

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EmotiBit_MLX90632/examples/EmotiBit_Example2-Changing_Refresh_Rate/EmotiBit_Example2-Changing_Refresh_Rate.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EmotiBit_MLX90632/examples/EmotiBit_Example2-Changing_Refresh_Rate/EmotiBit_Example2-Changing_Refresh_Rate.ino:26:30: error: 'EE_MEAS1' was not declared in this scope
  myTempSensor.readRegister16(EE_MEAS1, read_meas1);
                              ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EmotiBit_MLX90632/examples/EmotiBit_Example2-Changing_Refresh_Rate/EmotiBit_Example2-Changing_Refresh_Rate.ino:26:30: note: suggested alternative: 'EE_Aa'
  myTempSensor.readRegister16(EE_MEAS1, read_meas1);
                              ^~~~~~~~
                              EE_Aa
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EmotiBit_MLX90632/examples/EmotiBit_Example2-Changing_Refresh_Rate/EmotiBit_Example2-Changing_Refresh_Rate.ino:27:30: error: 'EE_MEAS2' was not declared in this scope
  myTempSensor.readRegister16(EE_MEAS2, read_meas2);
                              ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EmotiBit_MLX90632/examples/EmotiBit_Example2-Changing_Refresh_Rate/EmotiBit_Example2-Changing_Refresh_Rate.ino:27:30: note: suggested alternative: 'EE_Aa'
  myTempSensor.readRegister16(EE_MEAS2, read_meas2);
                              ^~~~~~~~
                              EE_Aa
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EmotiBit_MLX90632/examples/EmotiBit_Example2-Changing_Refresh_Rate/EmotiBit_Example2-Changing_Refresh_Rate.ino:33:15: error: 'class MLX90632' has no member named 'setMeasurementRate'
  myTempSensor.setMeasurementRate(8);
               ^~~~~~~~~~~~~~~~~~
Multiple libraries were found for "SparkFun_MLX90632_Arduino_Library.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_MLX90632_Noncontact_Infrared_Temperature_Sensor
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EmotiBit_MLX90632

examples/EmotiBit_Example3-Continuous_Reading

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EmotiBit_MLX90632/examples/EmotiBit_Example3-Continuous_Reading/EmotiBit_Example3-Continuous_Reading.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EmotiBit_MLX90632/examples/EmotiBit_Example3-Continuous_Reading/EmotiBit_Example3-Continuous_Reading.ino:57:30: error: 'EE_MEAS1' was not declared in this scope
  myTempSensor.readRegister16(EE_MEAS1, valueInMemory);
                              ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EmotiBit_MLX90632/examples/EmotiBit_Example3-Continuous_Reading/EmotiBit_Example3-Continuous_Reading.ino:57:30: note: suggested alternative: 'EE_Aa'
  myTempSensor.readRegister16(EE_MEAS1, valueInMemory);
                              ^~~~~~~~
                              EE_Aa
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EmotiBit_MLX90632/examples/EmotiBit_Example3-Continuous_Reading/EmotiBit_Example3-Continuous_Reading.ino:61:30: error: 'EE_MEAS2' was not declared in this scope
  myTempSensor.readRegister16(EE_MEAS2, valueInMemory);
                              ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EmotiBit_MLX90632/examples/EmotiBit_Example3-Continuous_Reading/EmotiBit_Example3-Continuous_Reading.ino:61:30: note: suggested alternative: 'EE_Aa'
  myTempSensor.readRegister16(EE_MEAS2, valueInMemory);
                              ^~~~~~~~
                              EE_Aa
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EmotiBit_MLX90632/examples/EmotiBit_Example3-Continuous_Reading/EmotiBit_Example3-Continuous_Reading.ino: In function 'void loop()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EmotiBit_MLX90632/examples/EmotiBit_Example3-Continuous_Reading/EmotiBit_Example3-Continuous_Reading.ino:82:31: error: 'SENSOR_NO_NEW_DATA' is not a member of 'MLX90632::status'
  myStatus = MLX90632::status::SENSOR_NO_NEW_DATA;
                               ^~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EmotiBit_MLX90632/examples/EmotiBit_Example3-Continuous_Reading/EmotiBit_Example3-Continuous_Reading.ino:87:29: error: 'class MLX90632' has no member named 'end_getObjectTemp'; did you mean 'getObjectTemp'?
   objectTemp = myTempSensor.end_getObjectTemp(myStatus); //Get the temperature of the object we're looking at in C
                             ^~~~~~~~~~~~~~~~~
                             getObjectTemp
Multiple libraries were found for "SparkFun_MLX90632_Arduino_Library.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_MLX90632_Noncontact_Infrared_Temperature_Sensor
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EmotiBit_MLX90632

examples/Example3-BeginOptions

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EmotiBit_MLX90632/examples/Example3-BeginOptions/Example3-BeginOptions.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EmotiBit_MLX90632/examples/Example3-BeginOptions/Example3-BeginOptions.ino:32:3: error: 'Wire1' was not declared in this scope
   Wire1.begin();
   ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EmotiBit_MLX90632/examples/Example3-BeginOptions/Example3-BeginOptions.ino:32:3: note: suggested alternative: 'Wire'
   Wire1.begin();
   ^~~~~
   Wire
Multiple libraries were found for "SparkFun_MLX90632_Arduino_Library.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_MLX90632_Noncontact_Infrared_Temperature_Sensor
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EmotiBit_MLX90632

examples/Example4-DebugPrinting

Result: PASS

Sketch uses 31804 bytes (12%) of program storage space. Maximum is 262144 bytes.
Global variables use 3720 bytes (11%) of dynamic memory, leaving 29048 bytes for local variables. Maximum is 32768 bytes.

examples/Example5-EEPROMWriting

Result: PASS

Sketch uses 24092 bytes (9%) of program storage space. Maximum is 262144 bytes.
Global variables use 3688 bytes (11%) of dynamic memory, leaving 29080 bytes for local variables. Maximum is 32768 bytes.

examples/Example9-AlgorithmTest

Result: PASS

Sketch uses 26068 bytes (9%) of program storage space. Maximum is 262144 bytes.
Global variables use 2996 bytes (9%) of dynamic memory, leaving 29772 bytes for local variables. Maximum is 32768 bytes.

esp32:esp32:d1_mini32 @ 1.0.6

Inclusion

Result: PASS

Sketch uses 204574 bytes (15%) of program storage space. Maximum is 1310720 bytes.
Global variables use 13968 bytes (4%) of dynamic memory, leaving 313712 bytes for local variables. Maximum is 327680 bytes.

examples/EmotiBit_Example1-Basic_Reading

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EmotiBit_MLX90632/examples/EmotiBit_Example1-Basic_Reading/EmotiBit_Example1-Basic_Reading.ino:13:17: error: 'sercom1' was not declared in this scope
 TwoWire myWire(&sercom1, 11, 13);
                 ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EmotiBit_MLX90632/examples/EmotiBit_Example1-Basic_Reading/EmotiBit_Example1-Basic_Reading.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EmotiBit_MLX90632/examples/EmotiBit_Example1-Basic_Reading/EmotiBit_Example1-Basic_Reading.ino:27:20: error: 'PIO_SERCOM' was not declared in this scope
  pinPeripheral(11, PIO_SERCOM);
                    ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EmotiBit_MLX90632/examples/EmotiBit_Example1-Basic_Reading/EmotiBit_Example1-Basic_Reading.ino:27:30: error: 'pinPeripheral' was not declared in this scope
  pinPeripheral(11, PIO_SERCOM);
                              ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EmotiBit_MLX90632/examples/EmotiBit_Example1-Basic_Reading/EmotiBit_Example1-Basic_Reading.ino:42:30: error: 'EE_MEAS1' was not declared in this scope
  myTempSensor.readRegister16(EE_MEAS1, valueInMemory);
                              ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EmotiBit_MLX90632/examples/EmotiBit_Example1-Basic_Reading/EmotiBit_Example1-Basic_Reading.ino:46:30: error: 'EE_MEAS2' was not declared in this scope
  myTempSensor.readRegister16(EE_MEAS2, valueInMemory);
                              ^
Multiple libraries were found for "SparkFun_MLX90632_Arduino_Library.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_MLX90632_Noncontact_Infrared_Temperature_Sensor
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EmotiBit_MLX90632

examples/EmotiBit_Example2-Changing_Refresh_Rate

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EmotiBit_MLX90632/examples/EmotiBit_Example2-Changing_Refresh_Rate/EmotiBit_Example2-Changing_Refresh_Rate.ino:7:17: error: 'sercom1' was not declared in this scope
 TwoWire myWire(&sercom1, 11, 13);
                 ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EmotiBit_MLX90632/examples/EmotiBit_Example2-Changing_Refresh_Rate/EmotiBit_Example2-Changing_Refresh_Rate.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EmotiBit_MLX90632/examples/EmotiBit_Example2-Changing_Refresh_Rate/EmotiBit_Example2-Changing_Refresh_Rate.ino:16:20: error: 'PIO_SERCOM' was not declared in this scope
  pinPeripheral(11, PIO_SERCOM);
                    ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EmotiBit_MLX90632/examples/EmotiBit_Example2-Changing_Refresh_Rate/EmotiBit_Example2-Changing_Refresh_Rate.ino:16:30: error: 'pinPeripheral' was not declared in this scope
  pinPeripheral(11, PIO_SERCOM);
                              ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EmotiBit_MLX90632/examples/EmotiBit_Example2-Changing_Refresh_Rate/EmotiBit_Example2-Changing_Refresh_Rate.ino:26:30: error: 'EE_MEAS1' was not declared in this scope
  myTempSensor.readRegister16(EE_MEAS1, read_meas1);
                              ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EmotiBit_MLX90632/examples/EmotiBit_Example2-Changing_Refresh_Rate/EmotiBit_Example2-Changing_Refresh_Rate.ino:27:30: error: 'EE_MEAS2' was not declared in this scope
  myTempSensor.readRegister16(EE_MEAS2, read_meas2);
                              ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EmotiBit_MLX90632/examples/EmotiBit_Example2-Changing_Refresh_Rate/EmotiBit_Example2-Changing_Refresh_Rate.ino:33:15: error: 'class MLX90632' has no member named 'setMeasurementRate'
  myTempSensor.setMeasurementRate(8);
               ^
Multiple libraries were found for "SparkFun_MLX90632_Arduino_Library.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_MLX90632_Noncontact_Infrared_Temperature_Sensor
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EmotiBit_MLX90632

examples/EmotiBit_Example3-Continuous_Reading

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EmotiBit_MLX90632/examples/EmotiBit_Example3-Continuous_Reading/EmotiBit_Example3-Continuous_Reading.ino:13:17: error: 'sercom1' was not declared in this scope
 TwoWire myWire(&sercom1, 11, 13);
                 ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EmotiBit_MLX90632/examples/EmotiBit_Example3-Continuous_Reading/EmotiBit_Example3-Continuous_Reading.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EmotiBit_MLX90632/examples/EmotiBit_Example3-Continuous_Reading/EmotiBit_Example3-Continuous_Reading.ino:27:20: error: 'PIO_SERCOM' was not declared in this scope
  pinPeripheral(11, PIO_SERCOM);
                    ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EmotiBit_MLX90632/examples/EmotiBit_Example3-Continuous_Reading/EmotiBit_Example3-Continuous_Reading.ino:27:30: error: 'pinPeripheral' was not declared in this scope
  pinPeripheral(11, PIO_SERCOM);
                              ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EmotiBit_MLX90632/examples/EmotiBit_Example3-Continuous_Reading/EmotiBit_Example3-Continuous_Reading.ino:57:30: error: 'EE_MEAS1' was not declared in this scope
  myTempSensor.readRegister16(EE_MEAS1, valueInMemory);
                              ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EmotiBit_MLX90632/examples/EmotiBit_Example3-Continuous_Reading/EmotiBit_Example3-Continuous_Reading.ino:61:30: error: 'EE_MEAS2' was not declared in this scope
  myTempSensor.readRegister16(EE_MEAS2, valueInMemory);
                              ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EmotiBit_MLX90632/examples/EmotiBit_Example3-Continuous_Reading/EmotiBit_Example3-Continuous_Reading.ino: In function 'void loop()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EmotiBit_MLX90632/examples/EmotiBit_Example3-Continuous_Reading/EmotiBit_Example3-Continuous_Reading.ino:82:13: error: 'SENSOR_NO_NEW_DATA' is not a member of 'MLX90632::status'
  myStatus = MLX90632::status::SENSOR_NO_NEW_DATA;
             ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EmotiBit_MLX90632/examples/EmotiBit_Example3-Continuous_Reading/EmotiBit_Example3-Continuous_Reading.ino:87:29: error: 'class MLX90632' has no member named 'end_getObjectTemp'
   objectTemp = myTempSensor.end_getObjectTemp(myStatus); //Get the temperature of the object we're looking at in C
                             ^
Multiple libraries were found for "SparkFun_MLX90632_Arduino_Library.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_MLX90632_Noncontact_Infrared_Temperature_Sensor
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EmotiBit_MLX90632

examples/Example3-BeginOptions

Result: PASS

Sketch uses 223602 bytes (17%) of program storage space. Maximum is 1310720 bytes.
Global variables use 14288 bytes (4%) of dynamic memory, leaving 313392 bytes for local variables. Maximum is 327680 bytes.

examples/Example4-DebugPrinting

Result: PASS

Sketch uses 223410 bytes (17%) of program storage space. Maximum is 1310720 bytes.
Global variables use 14288 bytes (4%) of dynamic memory, leaving 313392 bytes for local variables. Maximum is 327680 bytes.

examples/Example5-EEPROMWriting

Result: PASS

Sketch uses 216906 bytes (16%) of program storage space. Maximum is 1310720 bytes.
Global variables use 14256 bytes (4%) of dynamic memory, leaving 313424 bytes for local variables. Maximum is 327680 bytes.

examples/Example9-AlgorithmTest

Result: PASS

Sketch uses 211038 bytes (16%) of program storage space. Maximum is 1310720 bytes.
Global variables use 13416 bytes (4%) of dynamic memory, leaving 314264 bytes for local variables. Maximum is 327680 bytes.