FTRGBLED - compatibility matrix

This report was generated on Wednesday, 23-Feb-22 22:48:15 CET using arduino-testlib.

FTRGBLED

Version: 1.0.0
More details

Compatibility matrix

Board	Claims compatibility	Inclusion	ColourWheel	BlinkRGB	Chaser
arduino:avr:uno 1.8.4	Yes	PASS	PASS	PASS	PASS
arduino:mbed_nano:nanorp2040connect 2.7.2	No	FAIL	FAIL	FAIL	FAIL
arduino:megaavr:nona4809 1.8.7	No ⚠️	PASS	PASS	PASS	PASS
arduino:samd:mkrwifi1010 1.8.12	No	FAIL	FAIL	FAIL	FAIL
esp32:esp32:d1_mini32 1.0.6	No	FAIL	FAIL	FAIL	FAIL

Compilation logs

arduino:avr:uno @ 1.8.4

Inclusion

Result: PASS

Sketch uses 444 bytes (1%) of program storage space. Maximum is 32256 bytes.
Global variables use 9 bytes (0%) of dynamic memory, leaving 2039 bytes for local variables. Maximum is 2048 bytes.

examples/BlinkRGB

Result: PASS

Sketch uses 1974 bytes (6%) of program storage space. Maximum is 32256 bytes.
Global variables use 25 bytes (1%) of dynamic memory, leaving 2023 bytes for local variables. Maximum is 2048 bytes.

examples/Chaser

Result: PASS

Sketch uses 2924 bytes (9%) of program storage space. Maximum is 32256 bytes.
Global variables use 201 bytes (9%) of dynamic memory, leaving 1847 bytes for local variables. Maximum is 2048 bytes.

examples/ColourWheel

Result: PASS

Sketch uses 4552 bytes (14%) of program storage space. Maximum is 32256 bytes.
Global variables use 232 bytes (11%) of dynamic memory, leaving 1816 bytes for local variables. Maximum is 2048 bytes.

arduino:mbed_nano:nanorp2040connect @ 2.7.2

Inclusion

Result: FAIL

WARNING: library FTRGBLED claims to run on avr, sam architecture(s) and may be incompatible with your current board which runs on mbed_nano architecture(s).
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FTRGBLED/FTRGBLED.cpp: In function 'void delay20ns()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FTRGBLED/FTRGBLED.cpp:66:17: error: 'VARIANT_MCK' was not declared in this scope
   uint32_t n = (VARIANT_MCK / 150000000) + 1;
                 ^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FTRGBLED/FTRGBLED.cpp: In member function 'void RGBLEDChain::update()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FTRGBLED/FTRGBLED.cpp:83:30: error: 'portOutputRegister' was not declared in this scope
   volatile reg_t *port_sdi = portOutputRegister(digitalPinToPort(pin_sdi));
                              ^~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FTRGBLED/FTRGBLED.cpp:84:20: error: 'digitalPinToBitMask' was not declared in this scope
   reg_t mask_sdi = digitalPinToBitMask(pin_sdi);
                    ^~~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FTRGBLED/FTRGBLED.cpp:84:20: note: suggested alternative: 'digitalPinToPinName'
   reg_t mask_sdi = digitalPinToBitMask(pin_sdi);
                    ^~~~~~~~~~~~~~~~~~~
                    digitalPinToPinName

examples/BlinkRGB

Result: FAIL

WARNING: library FTRGBLED claims to run on avr, sam architecture(s) and may be incompatible with your current board which runs on mbed_nano architecture(s).
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FTRGBLED/FTRGBLED.cpp: In function 'void delay20ns()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FTRGBLED/FTRGBLED.cpp:66:17: error: 'VARIANT_MCK' was not declared in this scope
   uint32_t n = (VARIANT_MCK / 150000000) + 1;
                 ^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FTRGBLED/FTRGBLED.cpp: In member function 'void RGBLEDChain::update()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FTRGBLED/FTRGBLED.cpp:83:30: error: 'portOutputRegister' was not declared in this scope
   volatile reg_t *port_sdi = portOutputRegister(digitalPinToPort(pin_sdi));
                              ^~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FTRGBLED/FTRGBLED.cpp:84:20: error: 'digitalPinToBitMask' was not declared in this scope
   reg_t mask_sdi = digitalPinToBitMask(pin_sdi);
                    ^~~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FTRGBLED/FTRGBLED.cpp:84:20: note: suggested alternative: 'digitalPinToPinName'
   reg_t mask_sdi = digitalPinToBitMask(pin_sdi);
                    ^~~~~~~~~~~~~~~~~~~
                    digitalPinToPinName

examples/Chaser

Result: FAIL

WARNING: library FTRGBLED claims to run on avr, sam architecture(s) and may be incompatible with your current board which runs on mbed_nano architecture(s).
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FTRGBLED/FTRGBLED.cpp: In function 'void delay20ns()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FTRGBLED/FTRGBLED.cpp:66:17: error: 'VARIANT_MCK' was not declared in this scope
   uint32_t n = (VARIANT_MCK / 150000000) + 1;
                 ^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FTRGBLED/FTRGBLED.cpp: In member function 'void RGBLEDChain::update()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FTRGBLED/FTRGBLED.cpp:83:30: error: 'portOutputRegister' was not declared in this scope
   volatile reg_t *port_sdi = portOutputRegister(digitalPinToPort(pin_sdi));
                              ^~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FTRGBLED/FTRGBLED.cpp:84:20: error: 'digitalPinToBitMask' was not declared in this scope
   reg_t mask_sdi = digitalPinToBitMask(pin_sdi);
                    ^~~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FTRGBLED/FTRGBLED.cpp:84:20: note: suggested alternative: 'digitalPinToPinName'
   reg_t mask_sdi = digitalPinToBitMask(pin_sdi);
                    ^~~~~~~~~~~~~~~~~~~
                    digitalPinToPinName

examples/ColourWheel

Result: FAIL

WARNING: library FTRGBLED claims to run on avr, sam architecture(s) and may be incompatible with your current board which runs on mbed_nano architecture(s).
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FTRGBLED/FTRGBLED.cpp: In function 'void delay20ns()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FTRGBLED/FTRGBLED.cpp:66:17: error: 'VARIANT_MCK' was not declared in this scope
   uint32_t n = (VARIANT_MCK / 150000000) + 1;
                 ^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FTRGBLED/FTRGBLED.cpp: In member function 'void RGBLEDChain::update()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FTRGBLED/FTRGBLED.cpp:83:30: error: 'portOutputRegister' was not declared in this scope
   volatile reg_t *port_sdi = portOutputRegister(digitalPinToPort(pin_sdi));
                              ^~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FTRGBLED/FTRGBLED.cpp:84:20: error: 'digitalPinToBitMask' was not declared in this scope
   reg_t mask_sdi = digitalPinToBitMask(pin_sdi);
                    ^~~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FTRGBLED/FTRGBLED.cpp:84:20: note: suggested alternative: 'digitalPinToPinName'
   reg_t mask_sdi = digitalPinToBitMask(pin_sdi);
                    ^~~~~~~~~~~~~~~~~~~
                    digitalPinToPinName

arduino:megaavr:nona4809 @ 1.8.7

Inclusion

Result: PASS

WARNING: library FTRGBLED claims to run on avr, sam architecture(s) and may be incompatible with your current board which runs on megaavr architecture(s).
Sketch uses 802 bytes (1%) of program storage space. Maximum is 49152 bytes.
Global variables use 22 bytes (0%) of dynamic memory, leaving 6122 bytes for local variables. Maximum is 6144 bytes.

examples/BlinkRGB

Result: PASS

WARNING: library FTRGBLED claims to run on avr, sam architecture(s) and may be incompatible with your current board which runs on megaavr architecture(s).
Sketch uses 4176 bytes (8%) of program storage space. Maximum is 49152 bytes.
Global variables use 46 bytes (0%) of dynamic memory, leaving 6098 bytes for local variables. Maximum is 6144 bytes.

examples/Chaser

Result: PASS

WARNING: library FTRGBLED claims to run on avr, sam architecture(s) and may be incompatible with your current board which runs on megaavr architecture(s).
Sketch uses 5668 bytes (11%) of program storage space. Maximum is 49152 bytes.
Global variables use 202 bytes (3%) of dynamic memory, leaving 5942 bytes for local variables. Maximum is 6144 bytes.

examples/ColourWheel

Result: PASS

WARNING: library FTRGBLED claims to run on avr, sam architecture(s) and may be incompatible with your current board which runs on megaavr architecture(s).
Sketch uses 7328 bytes (14%) of program storage space. Maximum is 49152 bytes.
Global variables use 233 bytes (3%) of dynamic memory, leaving 5911 bytes for local variables. Maximum is 6144 bytes.

arduino:samd:mkrwifi1010 @ 1.8.12

Inclusion

Result: FAIL

WARNING: library FTRGBLED claims to run on avr, sam architecture(s) and may be incompatible with your current board which runs on samd architecture(s).
/tmp/ccrOqrHd.s: Assembler messages:
/tmp/ccrOqrHd.s:322: Error: instruction not supported in Thumb16 mode -- `subs r6,#1'

examples/BlinkRGB

Result: FAIL

WARNING: library FTRGBLED claims to run on avr, sam architecture(s) and may be incompatible with your current board which runs on samd architecture(s).
/tmp/cctq9dpn.s: Assembler messages:
/tmp/cctq9dpn.s:322: Error: instruction not supported in Thumb16 mode -- `subs r6,#1'

examples/Chaser

Result: FAIL

WARNING: library FTRGBLED claims to run on avr, sam architecture(s) and may be incompatible with your current board which runs on samd architecture(s).
/tmp/ccSIsTAv.s: Assembler messages:
/tmp/ccSIsTAv.s:322: Error: instruction not supported in Thumb16 mode -- `subs r6,#1'

examples/ColourWheel

Result: FAIL

WARNING: library FTRGBLED claims to run on avr, sam architecture(s) and may be incompatible with your current board which runs on samd architecture(s).
/tmp/ccBV4iHI.s: Assembler messages:
/tmp/ccBV4iHI.s:322: Error: instruction not supported in Thumb16 mode -- `subs r6,#1'

esp32:esp32:d1_mini32 @ 1.0.6

Inclusion

Result: FAIL

WARNING: library FTRGBLED claims to run on avr, sam architecture(s) and may be incompatible with your current board which runs on esp32 architecture(s).
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FTRGBLED/FTRGBLED.cpp: In function 'void delay20ns()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FTRGBLED/FTRGBLED.cpp:66:17: error: 'VARIANT_MCK' was not declared in this scope
   uint32_t n = (VARIANT_MCK / 150000000) + 1;
                 ^

examples/BlinkRGB

Result: FAIL

WARNING: library FTRGBLED claims to run on avr, sam architecture(s) and may be incompatible with your current board which runs on esp32 architecture(s).
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FTRGBLED/FTRGBLED.cpp: In function 'void delay20ns()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FTRGBLED/FTRGBLED.cpp:66:17: error: 'VARIANT_MCK' was not declared in this scope
   uint32_t n = (VARIANT_MCK / 150000000) + 1;
                 ^

examples/Chaser

Result: FAIL

WARNING: library FTRGBLED claims to run on avr, sam architecture(s) and may be incompatible with your current board which runs on esp32 architecture(s).
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FTRGBLED/FTRGBLED.cpp: In function 'void delay20ns()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FTRGBLED/FTRGBLED.cpp:66:17: error: 'VARIANT_MCK' was not declared in this scope
   uint32_t n = (VARIANT_MCK / 150000000) + 1;
                 ^

examples/ColourWheel

Result: FAIL

WARNING: library FTRGBLED claims to run on avr, sam architecture(s) and may be incompatible with your current board which runs on esp32 architecture(s).
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FTRGBLED/FTRGBLED.cpp: In function 'void delay20ns()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FTRGBLED/FTRGBLED.cpp:66:17: error: 'VARIANT_MCK' was not declared in this scope
   uint32_t n = (VARIANT_MCK / 150000000) + 1;
                 ^