FTTech Aqualabo Sensors - compatibility matrix

This report was generated on Wednesday, 23-Feb-22 22:48:15 CET using arduino-testlib.

FTTech Aqualabo Sensors

Version: 1.0.2
More details

Compatibility matrix

Board	Claims compatibility	Inclusion	ReadTurbidity
arduino:avr:uno 1.8.4	Yes	PASS	FAIL
arduino:mbed_nano:nanorp2040connect 2.7.2	Yes ⚠️	FAIL	FAIL
arduino:megaavr:nona4809 1.8.7	Yes	PASS	FAIL
arduino:samd:mkrwifi1010 1.8.12	Yes	PASS	FAIL
esp32:esp32:d1_mini32 1.0.6	Yes ⚠️	FAIL	FAIL

Compilation logs

arduino:avr:uno @ 1.8.4

Inclusion

Result: PASS
This library has no main header file so an empty one was created.

Sketch uses 9752 bytes (30%) of program storage space. Maximum is 32256 bytes.
Global variables use 1077 bytes (52%) of dynamic memory, leaving 971 bytes for local variables. Maximum is 2048 bytes.

examples/ReadTurbidity

Result: FAIL

WARNING: library FTTech_SAMD51_Clicks claims to run on samd architecture(s) and may be incompatible with your current board which runs on avr architecture(s).
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FTTech_Aqualabo_Sensors/examples/ReadTurbidity/ReadTurbidity.ino:39:18: error: 'A9' was not declared in this scope
 uint8_t de_pin = A9;
                  ^~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FTTech_Aqualabo_Sensors/examples/ReadTurbidity/ReadTurbidity.ino:39:18: note: suggested alternative: 'A7'
 uint8_t de_pin = A9;
                  ^~
                  A7
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FTTech_Aqualabo_Sensors/examples/ReadTurbidity/ReadTurbidity.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FTTech_Aqualabo_Sensors/examples/ReadTurbidity/ReadTurbidity.ino:35:20: error: 'Serial3' was not declared in this scope
 #define NTU_SERIAL Serial3
                    ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FTTech_Aqualabo_Sensors/examples/ReadTurbidity/ReadTurbidity.ino:61:22: note: in expansion of macro 'NTU_SERIAL'
   RS485 = RS485Class(NTU_SERIAL, tx_pin, de_pin, re_pin);
                      ^~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FTTech_Aqualabo_Sensors/examples/ReadTurbidity/ReadTurbidity.ino:35:20: note: suggested alternative: 'Serial'
 #define NTU_SERIAL Serial3
                    ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FTTech_Aqualabo_Sensors/examples/ReadTurbidity/ReadTurbidity.ino:61:22: note: in expansion of macro 'NTU_SERIAL'
   RS485 = RS485Class(NTU_SERIAL, tx_pin, de_pin, re_pin);
                      ^~~~~~~~~~

arduino:mbed_nano:nanorp2040connect @ 2.7.2

Inclusion

Result: FAIL

In function 'void __static_initialization_and_destruction_0(int, int)',
    inlined from '(static initializers for /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ArduinoRS485/src/RS485.cpp)' at /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ArduinoRS485/src/RS485.cpp:189:105:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ArduinoRS485/src/RS485.cpp:189:104: error: call to 'NinaPin::operator int' declared with attribute error: Change me to a #define
 RS485Class RS485(SERIAL_PORT_HARDWARE, RS485_DEFAULT_TX_PIN, RS485_DEFAULT_DE_PIN, RS485_DEFAULT_RE_PIN);
                                                                                                        ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ArduinoRS485/src/RS485.cpp:189:104: error: call to 'NinaPin::operator int' declared with attribute error: Change me to a #define

examples/ReadTurbidity

Result: FAIL

WARNING: library FTTech_SAMD51_Clicks claims to run on samd architecture(s) and may be incompatible with your current board which runs on mbed_nano architecture(s).
WARNING: library Adafruit_SleepyDog_Library claims to run on avr, samd, nrf52, teensy, esp32, esp8266 architecture(s) and may be incompatible with your current board which runs on mbed_nano architecture(s).
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FTTech_SAMD51_Clicks/src/FTTech_SAMD51_Clicks.h:7:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FTTech_SAMD51_Clicks/src/FTTech_SAMD51Clicks.h:3,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FTTech_Aqualabo_Sensors/examples/ReadTurbidity/ReadTurbidity.ino:31:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Adafruit_SleepyDog_Library/Adafruit_SleepyDog.h:38:2: error: #error Unsupported platform for the Adafruit Watchdog library!
 #error Unsupported platform for the Adafruit Watchdog library!
  ^~~~~
Multiple libraries were found for "AqualaboSensor.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AqualaboSensor
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FTTech_Aqualabo_Sensors

arduino:megaavr:nona4809 @ 1.8.7

Inclusion

Result: PASS

Sketch uses 10626 bytes (21%) of program storage space. Maximum is 49152 bytes.
Global variables use 443 bytes (7%) of dynamic memory, leaving 5701 bytes for local variables. Maximum is 6144 bytes.

examples/ReadTurbidity

Result: FAIL

WARNING: library FTTech_SAMD51_Clicks claims to run on samd architecture(s) and may be incompatible with your current board which runs on megaavr architecture(s).
WARNING: library Adafruit_SleepyDog_Library claims to run on avr, samd, nrf52, teensy, esp32, esp8266 architecture(s) and may be incompatible with your current board which runs on megaavr architecture(s).
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FTTech_Aqualabo_Sensors/examples/ReadTurbidity/ReadTurbidity.ino:39:18: error: 'A9' was not declared in this scope
 uint8_t de_pin = A9;
                  ^~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FTTech_Aqualabo_Sensors/examples/ReadTurbidity/ReadTurbidity.ino:39:18: note: suggested alternative: 'A7'
 uint8_t de_pin = A9;
                  ^~
                  A7
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FTTech_Aqualabo_Sensors/examples/ReadTurbidity/ReadTurbidity.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FTTech_Aqualabo_Sensors/examples/ReadTurbidity/ReadTurbidity.ino:61:3: error: 'RS485' was not declared in this scope
   RS485 = RS485Class(NTU_SERIAL, tx_pin, de_pin, re_pin);
   ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FTTech_Aqualabo_Sensors/examples/ReadTurbidity/ReadTurbidity.ino:35:20: error: 'Serial3' was not declared in this scope
 #define NTU_SERIAL Serial3
                    ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FTTech_Aqualabo_Sensors/examples/ReadTurbidity/ReadTurbidity.ino:61:22: note: in expansion of macro 'NTU_SERIAL'
   RS485 = RS485Class(NTU_SERIAL, tx_pin, de_pin, re_pin);
                      ^~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FTTech_Aqualabo_Sensors/examples/ReadTurbidity/ReadTurbidity.ino:35:20: note: suggested alternative: 'Serial1'
 #define NTU_SERIAL Serial3
                    ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FTTech_Aqualabo_Sensors/examples/ReadTurbidity/ReadTurbidity.ino:61:22: note: in expansion of macro 'NTU_SERIAL'
   RS485 = RS485Class(NTU_SERIAL, tx_pin, de_pin, re_pin);
                      ^~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FTTech_Aqualabo_Sensors/examples/ReadTurbidity/ReadTurbidity.ino:61:11: error: 'RS485Class' was not declared in this scope
   RS485 = RS485Class(NTU_SERIAL, tx_pin, de_pin, re_pin);
           ^~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FTTech_Aqualabo_Sensors/examples/ReadTurbidity/ReadTurbidity.ino:61:11: note: suggested alternative: 'PORTDClass'
   RS485 = RS485Class(NTU_SERIAL, tx_pin, de_pin, re_pin);
           ^~~~~~~~~~
           PORTDClass
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FTTech_Aqualabo_Sensors/examples/ReadTurbidity/ReadTurbidity.ino:62:3: error: 'ModbusRTUClient' was not declared in this scope
   ModbusRTUClient = ModbusRTUClientClass(RS485);
   ^~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FTTech_Aqualabo_Sensors/examples/ReadTurbidity/ReadTurbidity.ino:62:21: error: 'ModbusRTUClientClass' was not declared in this scope
   ModbusRTUClient = ModbusRTUClientClass(RS485);
                     ^~~~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FTTech_Aqualabo_Sensors/examples/ReadTurbidity/ReadTurbidity.ino:64:3: error: 'aqualaboSensorObj' was not declared in this scope
   aqualaboSensorObj = AqualaboSensorClass(ModbusRTUClient);
   ^~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FTTech_Aqualabo_Sensors/examples/ReadTurbidity/ReadTurbidity.ino:64:23: error: 'AqualaboSensorClass' was not declared in this scope
   aqualaboSensorObj = AqualaboSensorClass(ModbusRTUClient);
                       ^~~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FTTech_Aqualabo_Sensors/examples/ReadTurbidity/ReadTurbidity.ino: In function 'void loop()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FTTech_Aqualabo_Sensors/examples/ReadTurbidity/ReadTurbidity.ino:78:3: error: 'aqualaboSensorObj' was not declared in this scope
   aqualaboSensorObj.readNTU();
   ^~~~~~~~~~~~~~~~~
Multiple libraries were found for "AqualaboSensor.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AqualaboSensor
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FTTech_Aqualabo_Sensors

arduino:samd:mkrwifi1010 @ 1.8.12

Inclusion

Result: PASS
This library has no main header file so an empty one was created.

Sketch uses 34432 bytes (13%) of program storage space. Maximum is 262144 bytes.
Global variables use 3604 bytes (10%) of dynamic memory, leaving 29164 bytes for local variables. Maximum is 32768 bytes.

examples/ReadTurbidity

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FTTech_Aqualabo_Sensors/examples/ReadTurbidity/ReadTurbidity.ino:39:18: error: 'A9' was not declared in this scope
 uint8_t de_pin = A9;
                  ^~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FTTech_Aqualabo_Sensors/examples/ReadTurbidity/ReadTurbidity.ino:39:18: note: suggested alternative: 'A6'
 uint8_t de_pin = A9;
                  ^~
                  A6
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FTTech_Aqualabo_Sensors/examples/ReadTurbidity/ReadTurbidity.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FTTech_Aqualabo_Sensors/examples/ReadTurbidity/ReadTurbidity.ino:35:20: error: 'Serial3' was not declared in this scope
 #define NTU_SERIAL Serial3
                    ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FTTech_Aqualabo_Sensors/examples/ReadTurbidity/ReadTurbidity.ino:61:22: note: in expansion of macro 'NTU_SERIAL'
   RS485 = RS485Class(NTU_SERIAL, tx_pin, de_pin, re_pin);
                      ^~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FTTech_Aqualabo_Sensors/examples/ReadTurbidity/ReadTurbidity.ino:35:20: note: suggested alternative: 'Serial_'
 #define NTU_SERIAL Serial3
                    ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FTTech_Aqualabo_Sensors/examples/ReadTurbidity/ReadTurbidity.ino:61:22: note: in expansion of macro 'NTU_SERIAL'
   RS485 = RS485Class(NTU_SERIAL, tx_pin, de_pin, re_pin);
                      ^~~~~~~~~~

esp32:esp32:d1_mini32 @ 1.0.6

Inclusion

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ArduinoRS485/src/RS485.cpp:189:18: error: 'SERIAL_PORT_HARDWARE' was not declared in this scope
 RS485Class RS485(SERIAL_PORT_HARDWARE, RS485_DEFAULT_TX_PIN, RS485_DEFAULT_DE_PIN, RS485_DEFAULT_RE_PIN);
                  ^

examples/ReadTurbidity

Result: FAIL

WARNING: library FTTech_SAMD51_Clicks claims to run on samd architecture(s) and may be incompatible with your current board which runs on esp32 architecture(s).
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FTTech_Aqualabo_Sensors/examples/ReadTurbidity/ReadTurbidity.ino:39:18: error: 'A9' was not declared in this scope
 uint8_t de_pin = A9;
                  ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FTTech_Aqualabo_Sensors/examples/ReadTurbidity/ReadTurbidity.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FTTech_Aqualabo_Sensors/examples/ReadTurbidity/ReadTurbidity.ino:61:3: error: 'RS485' was not declared in this scope
   RS485 = RS485Class(NTU_SERIAL, tx_pin, de_pin, re_pin);
   ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FTTech_Aqualabo_Sensors/examples/ReadTurbidity/ReadTurbidity.ino:35:20: error: 'Serial3' was not declared in this scope
 #define NTU_SERIAL Serial3
                    ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FTTech_Aqualabo_Sensors/examples/ReadTurbidity/ReadTurbidity.ino:61:22: note: in expansion of macro 'NTU_SERIAL'
   RS485 = RS485Class(NTU_SERIAL, tx_pin, de_pin, re_pin);
                      ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FTTech_Aqualabo_Sensors/examples/ReadTurbidity/ReadTurbidity.ino:61:56: error: 'RS485Class' was not declared in this scope
   RS485 = RS485Class(NTU_SERIAL, tx_pin, de_pin, re_pin);
                                                        ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FTTech_Aqualabo_Sensors/examples/ReadTurbidity/ReadTurbidity.ino:62:3: error: 'ModbusRTUClient' was not declared in this scope
   ModbusRTUClient = ModbusRTUClientClass(RS485);
   ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FTTech_Aqualabo_Sensors/examples/ReadTurbidity/ReadTurbidity.ino:62:47: error: 'ModbusRTUClientClass' was not declared in this scope
   ModbusRTUClient = ModbusRTUClientClass(RS485);
                                               ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FTTech_Aqualabo_Sensors/examples/ReadTurbidity/ReadTurbidity.ino:64:3: error: 'aqualaboSensorObj' was not declared in this scope
   aqualaboSensorObj = AqualaboSensorClass(ModbusRTUClient);
   ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FTTech_Aqualabo_Sensors/examples/ReadTurbidity/ReadTurbidity.ino:64:58: error: 'AqualaboSensorClass' was not declared in this scope
   aqualaboSensorObj = AqualaboSensorClass(ModbusRTUClient);
                                                          ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FTTech_Aqualabo_Sensors/examples/ReadTurbidity/ReadTurbidity.ino: In function 'void loop()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FTTech_Aqualabo_Sensors/examples/ReadTurbidity/ReadTurbidity.ino:78:3: error: 'aqualaboSensorObj' was not declared in this scope
   aqualaboSensorObj.readNTU();
   ^
Multiple libraries were found for "AqualaboSensor.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AqualaboSensor
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FTTech_Aqualabo_Sensors