FastBLE - compatibility matrix

This report was generated on Wednesday, 23-Feb-22 22:48:15 CET using arduino-testlib.

FastBLE

Version: 0.2.0
More details

Compatibility matrix

Board	Claims compatibility	Inclusion	SerialNINAPassthrough	multiplication
arduino:avr:uno 1.8.4	No	FAIL	FAIL	FAIL
arduino:mbed_nano:nanorp2040connect 2.7.2	No ⚠️	PASS	PASS	PASS
arduino:megaavr:nona4809 1.8.7	No	FAIL	FAIL	FAIL
arduino:samd:mkrwifi1010 1.8.12	Yes	PASS	PASS	PASS
esp32:esp32:d1_mini32 1.0.6	No	FAIL	FAIL	FAIL

Compilation logs

arduino:avr:uno @ 1.8.4

Inclusion

Result: FAIL

WARNING: library FastBLE claims to run on samd architecture(s) and may be incompatible with your current board which runs on avr architecture(s).
In file included from /tmp/arduino-testlib3997516651/test/test.ino:1:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastBLE/src/FastBLE.h: In member function 'void BLETypes::Output<T>::write(T)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastBLE/src/FastBLE.h:19:7: error: 'Serial2' was not declared in this scope
       Serial2.write((uint8_t*)&_n, 2);
       ^~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastBLE/src/FastBLE.h:19:7: note: suggested alternative: 'Serial'
       Serial2.write((uint8_t*)&_n, 2);
       ^~~~~~~
       Serial
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastBLE/src/FastBLE.h: In member function 'virtual void BLETypes::Input<T>::setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastBLE/src/FastBLE.h:42:7: error: 'Serial2' was not declared in this scope
       Serial2.write((uint8_t*)&msg, sizeof(SetupMessage));
       ^~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastBLE/src/FastBLE.h:42:7: note: suggested alternative: 'Serial'
       Serial2.write((uint8_t*)&msg, sizeof(SetupMessage));
       ^~~~~~~
       Serial
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastBLE/src/FastBLE.h: In member function 'virtual void BLETypes::Input<T>::receive()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastBLE/src/FastBLE.h:47:7: error: 'Serial2' was not declared in this scope
       Serial2.readBytes((uint8_t*)&x, sizeof(T));
       ^~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastBLE/src/FastBLE.h:47:7: note: suggested alternative: 'Serial'
       Serial2.readBytes((uint8_t*)&x, sizeof(T));
       ^~~~~~~
       Serial
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastBLE/src/FastBLE.h: In member function 'BLETypes::Output<T> BLEClass::add_output(ble_uuid_any_t)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastBLE/src/FastBLE.h:68:5: error: 'Serial2' was not declared in this scope
     Serial2.write((uint8_t*)&msg, sizeof(SetupMessage));
     ^~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastBLE/src/FastBLE.h:68:5: note: suggested alternative: 'Serial'
     Serial2.write((uint8_t*)&msg, sizeof(SetupMessage));
     ^~~~~~~
     Serial

examples/SerialNINAPassthrough

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastBLE/examples/SerialNINAPassthrough/SerialNINAPassthrough.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastBLE/examples/SerialNINAPassthrough/SerialNINAPassthrough.ino:40:3: error: 'SerialNina' was not declared in this scope
   SerialNina.begin(baud);
   ^~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastBLE/examples/SerialNINAPassthrough/SerialNINAPassthrough.ino:40:3: note: suggested alternative: 'Serial'
   SerialNina.begin(baud);
   ^~~~~~~~~~
   Serial
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastBLE/examples/SerialNINAPassthrough/SerialNINAPassthrough.ino:46:11: error: 'NINA_GPIO0' was not declared in this scope
   pinMode(NINA_GPIO0, OUTPUT);
           ^~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastBLE/examples/SerialNINAPassthrough/SerialNINAPassthrough.ino:47:11: error: 'NINA_RESETN' was not declared in this scope
   pinMode(NINA_RESETN, OUTPUT);
           ^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastBLE/examples/SerialNINAPassthrough/SerialNINAPassthrough.ino: In function 'void loop()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastBLE/examples/SerialNINAPassthrough/SerialNINAPassthrough.ino:64:21: error: 'class HardwareSerial' has no member named 'rts'
   if (rts != Serial.rts()) {
                     ^~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastBLE/examples/SerialNINAPassthrough/SerialNINAPassthrough.ino:70:18: error: 'NINA_RESETN' was not declared in this scope
     digitalWrite(NINA_RESETN, Serial.rts());
                  ^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastBLE/examples/SerialNINAPassthrough/SerialNINAPassthrough.ino:70:38: error: 'class HardwareSerial' has no member named 'rts'
     digitalWrite(NINA_RESETN, Serial.rts());
                                      ^~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastBLE/examples/SerialNINAPassthrough/SerialNINAPassthrough.ino:72:18: error: 'class HardwareSerial' has no member named 'rts'
     rts = Serial.rts();
                  ^~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastBLE/examples/SerialNINAPassthrough/SerialNINAPassthrough.ino:75:21: error: 'class HardwareSerial' has no member named 'dtr'
   if (dtr != Serial.dtr()) {
                     ^~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastBLE/examples/SerialNINAPassthrough/SerialNINAPassthrough.ino:79:18: error: 'NINA_GPIO0' was not declared in this scope
     digitalWrite(NINA_GPIO0, (Serial.dtr() == 0) ? HIGH : LOW);
                  ^~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastBLE/examples/SerialNINAPassthrough/SerialNINAPassthrough.ino:79:38: error: 'class HardwareSerial' has no member named 'dtr'
     digitalWrite(NINA_GPIO0, (Serial.dtr() == 0) ? HIGH : LOW);
                                      ^~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastBLE/examples/SerialNINAPassthrough/SerialNINAPassthrough.ino:81:18: error: 'class HardwareSerial' has no member named 'dtr'
     dtr = Serial.dtr();
                  ^~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastBLE/examples/SerialNINAPassthrough/SerialNINAPassthrough.ino:86:5: error: 'SerialNina' was not declared in this scope
     SerialNina.write(Serial.read());
     ^~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastBLE/examples/SerialNINAPassthrough/SerialNINAPassthrough.ino:86:5: note: suggested alternative: 'Serial'
     SerialNina.write(Serial.read());
     ^~~~~~~~~~
     Serial
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastBLE/examples/SerialNINAPassthrough/SerialNINAPassthrough.ino:89:7: error: 'SerialNina' was not declared in this scope
   if (SerialNina.available()) {
       ^~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastBLE/examples/SerialNINAPassthrough/SerialNINAPassthrough.ino:89:7: note: suggested alternative: 'Serial'
   if (SerialNina.available()) {
       ^~~~~~~~~~
       Serial
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastBLE/examples/SerialNINAPassthrough/SerialNINAPassthrough.ino:95:14: error: 'class HardwareSerial' has no member named 'baud'
   if (Serial.baud() != baud) {
              ^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastBLE/examples/SerialNINAPassthrough/SerialNINAPassthrough.ino:99:19: error: 'class HardwareSerial' has no member named 'baud'
     baud = Serial.baud();
                   ^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastBLE/examples/SerialNINAPassthrough/SerialNINAPassthrough.ino:101:5: error: 'SerialNina' was not declared in this scope
     SerialNina.begin(baud);
     ^~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastBLE/examples/SerialNINAPassthrough/SerialNINAPassthrough.ino:101:5: note: suggested alternative: 'Serial'
     SerialNina.begin(baud);
     ^~~~~~~~~~
     Serial

examples/multiplication

Result: FAIL

WARNING: library FastBLE claims to run on samd architecture(s) and may be incompatible with your current board which runs on avr architecture(s).
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastBLE/examples/multiplication/multiplication.ino:8:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastBLE/src/FastBLE.h: In member function 'void BLETypes::Output<T>::write(T)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastBLE/src/FastBLE.h:19:7: error: 'Serial2' was not declared in this scope
       Serial2.write((uint8_t*)&_n, 2);
       ^~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastBLE/src/FastBLE.h:19:7: note: suggested alternative: 'Serial'
       Serial2.write((uint8_t*)&_n, 2);
       ^~~~~~~
       Serial
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastBLE/src/FastBLE.h: In member function 'virtual void BLETypes::Input<T>::setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastBLE/src/FastBLE.h:42:7: error: 'Serial2' was not declared in this scope
       Serial2.write((uint8_t*)&msg, sizeof(SetupMessage));
       ^~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastBLE/src/FastBLE.h:42:7: note: suggested alternative: 'Serial'
       Serial2.write((uint8_t*)&msg, sizeof(SetupMessage));
       ^~~~~~~
       Serial
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastBLE/src/FastBLE.h: In member function 'virtual void BLETypes::Input<T>::receive()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastBLE/src/FastBLE.h:47:7: error: 'Serial2' was not declared in this scope
       Serial2.readBytes((uint8_t*)&x, sizeof(T));
       ^~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastBLE/src/FastBLE.h:47:7: note: suggested alternative: 'Serial'
       Serial2.readBytes((uint8_t*)&x, sizeof(T));
       ^~~~~~~
       Serial
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastBLE/src/FastBLE.h: In member function 'BLETypes::Output<T> BLEClass::add_output(ble_uuid_any_t)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastBLE/src/FastBLE.h:68:5: error: 'Serial2' was not declared in this scope
     Serial2.write((uint8_t*)&msg, sizeof(SetupMessage));
     ^~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastBLE/src/FastBLE.h:68:5: note: suggested alternative: 'Serial'
     Serial2.write((uint8_t*)&msg, sizeof(SetupMessage));
     ^~~~~~~
     Serial

arduino:mbed_nano:nanorp2040connect @ 2.7.2

Inclusion

Result: PASS

WARNING: library FastBLE claims to run on samd architecture(s) and may be incompatible with your current board which runs on mbed_nano architecture(s).
Sketch uses 78776 bytes (0%) of program storage space. Maximum is 16777216 bytes.
Global variables use 43460 bytes (16%) of dynamic memory, leaving 226876 bytes for local variables. Maximum is 270336 bytes.

examples/SerialNINAPassthrough

Result: PASS

Sketch uses 79408 bytes (0%) of program storage space. Maximum is 16777216 bytes.
Global variables use 43444 bytes (16%) of dynamic memory, leaving 226892 bytes for local variables. Maximum is 270336 bytes.

examples/multiplication

Result: PASS

WARNING: library FastBLE claims to run on samd architecture(s) and may be incompatible with your current board which runs on mbed_nano architecture(s).
Sketch uses 79780 bytes (0%) of program storage space. Maximum is 16777216 bytes.
Global variables use 43460 bytes (16%) of dynamic memory, leaving 226876 bytes for local variables. Maximum is 270336 bytes.

arduino:megaavr:nona4809 @ 1.8.7

Inclusion

Result: FAIL

WARNING: library FastBLE claims to run on samd architecture(s) and may be incompatible with your current board which runs on megaavr architecture(s).
In file included from /tmp/arduino-testlib1824253230/test/test.ino:1:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastBLE/src/FastBLE.h: In member function 'void BLETypes::Output<T>::write(T)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastBLE/src/FastBLE.h:19:7: error: 'Serial2' was not declared in this scope
       Serial2.write((uint8_t*)&_n, 2);
       ^~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastBLE/src/FastBLE.h:19:7: note: suggested alternative: 'Serial1'
       Serial2.write((uint8_t*)&_n, 2);
       ^~~~~~~
       Serial1
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastBLE/src/FastBLE.h: In member function 'virtual void BLETypes::Input<T>::setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastBLE/src/FastBLE.h:42:7: error: 'Serial2' was not declared in this scope
       Serial2.write((uint8_t*)&msg, sizeof(SetupMessage));
       ^~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastBLE/src/FastBLE.h:42:7: note: suggested alternative: 'Serial1'
       Serial2.write((uint8_t*)&msg, sizeof(SetupMessage));
       ^~~~~~~
       Serial1
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastBLE/src/FastBLE.h: In member function 'virtual void BLETypes::Input<T>::receive()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastBLE/src/FastBLE.h:47:7: error: 'Serial2' was not declared in this scope
       Serial2.readBytes((uint8_t*)&x, sizeof(T));
       ^~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastBLE/src/FastBLE.h:47:7: note: suggested alternative: 'Serial1'
       Serial2.readBytes((uint8_t*)&x, sizeof(T));
       ^~~~~~~
       Serial1
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastBLE/src/FastBLE.h: In member function 'BLETypes::Output<T> BLEClass::add_output(ble_uuid_any_t)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastBLE/src/FastBLE.h:68:5: error: 'Serial2' was not declared in this scope
     Serial2.write((uint8_t*)&msg, sizeof(SetupMessage));
     ^~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastBLE/src/FastBLE.h:68:5: note: suggested alternative: 'Serial1'
     Serial2.write((uint8_t*)&msg, sizeof(SetupMessage));
     ^~~~~~~
     Serial1

examples/SerialNINAPassthrough

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastBLE/examples/SerialNINAPassthrough/SerialNINAPassthrough.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastBLE/examples/SerialNINAPassthrough/SerialNINAPassthrough.ino:40:3: error: 'SerialNina' was not declared in this scope
   SerialNina.begin(baud);
   ^~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastBLE/examples/SerialNINAPassthrough/SerialNINAPassthrough.ino:40:3: note: suggested alternative: 'Serial1'
   SerialNina.begin(baud);
   ^~~~~~~~~~
   Serial1
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastBLE/examples/SerialNINAPassthrough/SerialNINAPassthrough.ino:46:11: error: 'NINA_GPIO0' was not declared in this scope
   pinMode(NINA_GPIO0, OUTPUT);
           ^~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastBLE/examples/SerialNINAPassthrough/SerialNINAPassthrough.ino:46:11: note: suggested alternative: 'GPIO_GPIO0'
   pinMode(NINA_GPIO0, OUTPUT);
           ^~~~~~~~~~
           GPIO_GPIO0
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastBLE/examples/SerialNINAPassthrough/SerialNINAPassthrough.ino:47:11: error: 'NINA_RESETN' was not declared in this scope
   pinMode(NINA_RESETN, OUTPUT);
           ^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastBLE/examples/SerialNINAPassthrough/SerialNINAPassthrough.ino:47:11: note: suggested alternative: 'MSC_RESET'
   pinMode(NINA_RESETN, OUTPUT);
           ^~~~~~~~~~~
           MSC_RESET
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastBLE/examples/SerialNINAPassthrough/SerialNINAPassthrough.ino: In function 'void loop()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastBLE/examples/SerialNINAPassthrough/SerialNINAPassthrough.ino:64:21: error: 'class UartClass' has no member named 'rts'
   if (rts != Serial.rts()) {
                     ^~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastBLE/examples/SerialNINAPassthrough/SerialNINAPassthrough.ino:70:18: error: 'NINA_RESETN' was not declared in this scope
     digitalWrite(NINA_RESETN, Serial.rts());
                  ^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastBLE/examples/SerialNINAPassthrough/SerialNINAPassthrough.ino:70:18: note: suggested alternative: 'MSC_RESET'
     digitalWrite(NINA_RESETN, Serial.rts());
                  ^~~~~~~~~~~
                  MSC_RESET
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastBLE/examples/SerialNINAPassthrough/SerialNINAPassthrough.ino:70:38: error: 'class UartClass' has no member named 'rts'
     digitalWrite(NINA_RESETN, Serial.rts());
                                      ^~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastBLE/examples/SerialNINAPassthrough/SerialNINAPassthrough.ino:72:18: error: 'class UartClass' has no member named 'rts'
     rts = Serial.rts();
                  ^~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastBLE/examples/SerialNINAPassthrough/SerialNINAPassthrough.ino:75:21: error: 'class UartClass' has no member named 'dtr'
   if (dtr != Serial.dtr()) {
                     ^~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastBLE/examples/SerialNINAPassthrough/SerialNINAPassthrough.ino:79:18: error: 'NINA_GPIO0' was not declared in this scope
     digitalWrite(NINA_GPIO0, (Serial.dtr() == 0) ? HIGH : LOW);
                  ^~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastBLE/examples/SerialNINAPassthrough/SerialNINAPassthrough.ino:79:18: note: suggested alternative: 'GPIO_GPIO0'
     digitalWrite(NINA_GPIO0, (Serial.dtr() == 0) ? HIGH : LOW);
                  ^~~~~~~~~~
                  GPIO_GPIO0
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastBLE/examples/SerialNINAPassthrough/SerialNINAPassthrough.ino:79:38: error: 'class UartClass' has no member named 'dtr'
     digitalWrite(NINA_GPIO0, (Serial.dtr() == 0) ? HIGH : LOW);
                                      ^~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastBLE/examples/SerialNINAPassthrough/SerialNINAPassthrough.ino:81:18: error: 'class UartClass' has no member named 'dtr'
     dtr = Serial.dtr();
                  ^~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastBLE/examples/SerialNINAPassthrough/SerialNINAPassthrough.ino:86:5: error: 'SerialNina' was not declared in this scope
     SerialNina.write(Serial.read());
     ^~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastBLE/examples/SerialNINAPassthrough/SerialNINAPassthrough.ino:86:5: note: suggested alternative: 'Serial1'
     SerialNina.write(Serial.read());
     ^~~~~~~~~~
     Serial1
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastBLE/examples/SerialNINAPassthrough/SerialNINAPassthrough.ino:89:7: error: 'SerialNina' was not declared in this scope
   if (SerialNina.available()) {
       ^~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastBLE/examples/SerialNINAPassthrough/SerialNINAPassthrough.ino:89:7: note: suggested alternative: 'Serial1'
   if (SerialNina.available()) {
       ^~~~~~~~~~
       Serial1
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastBLE/examples/SerialNINAPassthrough/SerialNINAPassthrough.ino:95:14: error: 'class UartClass' has no member named 'baud'; did you mean 'bind'?
   if (Serial.baud() != baud) {
              ^~~~
              bind
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastBLE/examples/SerialNINAPassthrough/SerialNINAPassthrough.ino:99:19: error: 'class UartClass' has no member named 'baud'; did you mean 'bind'?
     baud = Serial.baud();
                   ^~~~
                   bind
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastBLE/examples/SerialNINAPassthrough/SerialNINAPassthrough.ino:101:5: error: 'SerialNina' was not declared in this scope
     SerialNina.begin(baud);
     ^~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastBLE/examples/SerialNINAPassthrough/SerialNINAPassthrough.ino:101:5: note: suggested alternative: 'Serial1'
     SerialNina.begin(baud);
     ^~~~~~~~~~
     Serial1

examples/multiplication

Result: FAIL

WARNING: library FastBLE claims to run on samd architecture(s) and may be incompatible with your current board which runs on megaavr architecture(s).
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastBLE/examples/multiplication/multiplication.ino:8:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastBLE/src/FastBLE.h: In member function 'void BLETypes::Output<T>::write(T)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastBLE/src/FastBLE.h:19:7: error: 'Serial2' was not declared in this scope
       Serial2.write((uint8_t*)&_n, 2);
       ^~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastBLE/src/FastBLE.h:19:7: note: suggested alternative: 'Serial1'
       Serial2.write((uint8_t*)&_n, 2);
       ^~~~~~~
       Serial1
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastBLE/src/FastBLE.h: In member function 'virtual void BLETypes::Input<T>::setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastBLE/src/FastBLE.h:42:7: error: 'Serial2' was not declared in this scope
       Serial2.write((uint8_t*)&msg, sizeof(SetupMessage));
       ^~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastBLE/src/FastBLE.h:42:7: note: suggested alternative: 'Serial1'
       Serial2.write((uint8_t*)&msg, sizeof(SetupMessage));
       ^~~~~~~
       Serial1
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastBLE/src/FastBLE.h: In member function 'virtual void BLETypes::Input<T>::receive()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastBLE/src/FastBLE.h:47:7: error: 'Serial2' was not declared in this scope
       Serial2.readBytes((uint8_t*)&x, sizeof(T));
       ^~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastBLE/src/FastBLE.h:47:7: note: suggested alternative: 'Serial1'
       Serial2.readBytes((uint8_t*)&x, sizeof(T));
       ^~~~~~~
       Serial1
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastBLE/src/FastBLE.h: In member function 'BLETypes::Output<T> BLEClass::add_output(ble_uuid_any_t)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastBLE/src/FastBLE.h:68:5: error: 'Serial2' was not declared in this scope
     Serial2.write((uint8_t*)&msg, sizeof(SetupMessage));
     ^~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastBLE/src/FastBLE.h:68:5: note: suggested alternative: 'Serial1'
     Serial2.write((uint8_t*)&msg, sizeof(SetupMessage));
     ^~~~~~~
     Serial1

arduino:samd:mkrwifi1010 @ 1.8.12

Inclusion

Result: PASS

Sketch uses 12172 bytes (4%) of program storage space. Maximum is 262144 bytes.
Global variables use 3008 bytes (9%) of dynamic memory, leaving 29760 bytes for local variables. Maximum is 32768 bytes.

examples/SerialNINAPassthrough

Result: PASS

Sketch uses 12448 bytes (4%) of program storage space. Maximum is 262144 bytes.
Global variables use 3012 bytes (9%) of dynamic memory, leaving 29756 bytes for local variables. Maximum is 32768 bytes.

examples/multiplication

Result: PASS

Sketch uses 12948 bytes (4%) of program storage space. Maximum is 262144 bytes.
Global variables use 3012 bytes (9%) of dynamic memory, leaving 29756 bytes for local variables. Maximum is 32768 bytes.

esp32:esp32:d1_mini32 @ 1.0.6

Inclusion

Result: FAIL

WARNING: library FastBLE claims to run on samd architecture(s) and may be incompatible with your current board which runs on esp32 architecture(s).
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastBLE/src/FastBle.cpp: In member function 'void BLEClass::init_if_not_initialized()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastBLE/src/FastBle.cpp:12:11: error: 'NINA_RESETN' was not declared in this scope
   pinMode(NINA_RESETN, OUTPUT);
           ^

examples/SerialNINAPassthrough

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastBLE/examples/SerialNINAPassthrough/SerialNINAPassthrough.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastBLE/examples/SerialNINAPassthrough/SerialNINAPassthrough.ino:40:3: error: 'SerialNina' was not declared in this scope
   SerialNina.begin(baud);
   ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastBLE/examples/SerialNINAPassthrough/SerialNINAPassthrough.ino:46:11: error: 'NINA_GPIO0' was not declared in this scope
   pinMode(NINA_GPIO0, OUTPUT);
           ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastBLE/examples/SerialNINAPassthrough/SerialNINAPassthrough.ino:47:11: error: 'NINA_RESETN' was not declared in this scope
   pinMode(NINA_RESETN, OUTPUT);
           ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastBLE/examples/SerialNINAPassthrough/SerialNINAPassthrough.ino: In function 'void loop()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastBLE/examples/SerialNINAPassthrough/SerialNINAPassthrough.ino:64:21: error: 'class HardwareSerial' has no member named 'rts'
   if (rts != Serial.rts()) {
                     ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastBLE/examples/SerialNINAPassthrough/SerialNINAPassthrough.ino:70:18: error: 'NINA_RESETN' was not declared in this scope
     digitalWrite(NINA_RESETN, Serial.rts());
                  ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastBLE/examples/SerialNINAPassthrough/SerialNINAPassthrough.ino:70:38: error: 'class HardwareSerial' has no member named 'rts'
     digitalWrite(NINA_RESETN, Serial.rts());
                                      ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastBLE/examples/SerialNINAPassthrough/SerialNINAPassthrough.ino:72:18: error: 'class HardwareSerial' has no member named 'rts'
     rts = Serial.rts();
                  ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastBLE/examples/SerialNINAPassthrough/SerialNINAPassthrough.ino:75:21: error: 'class HardwareSerial' has no member named 'dtr'
   if (dtr != Serial.dtr()) {
                     ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastBLE/examples/SerialNINAPassthrough/SerialNINAPassthrough.ino:79:18: error: 'NINA_GPIO0' was not declared in this scope
     digitalWrite(NINA_GPIO0, (Serial.dtr() == 0) ? HIGH : LOW);
                  ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastBLE/examples/SerialNINAPassthrough/SerialNINAPassthrough.ino:79:38: error: 'class HardwareSerial' has no member named 'dtr'
     digitalWrite(NINA_GPIO0, (Serial.dtr() == 0) ? HIGH : LOW);
                                      ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastBLE/examples/SerialNINAPassthrough/SerialNINAPassthrough.ino:81:18: error: 'class HardwareSerial' has no member named 'dtr'
     dtr = Serial.dtr();
                  ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastBLE/examples/SerialNINAPassthrough/SerialNINAPassthrough.ino:86:5: error: 'SerialNina' was not declared in this scope
     SerialNina.write(Serial.read());
     ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastBLE/examples/SerialNINAPassthrough/SerialNINAPassthrough.ino:89:7: error: 'SerialNina' was not declared in this scope
   if (SerialNina.available()) {
       ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastBLE/examples/SerialNINAPassthrough/SerialNINAPassthrough.ino:95:14: error: 'class HardwareSerial' has no member named 'baud'
   if (Serial.baud() != baud) {
              ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastBLE/examples/SerialNINAPassthrough/SerialNINAPassthrough.ino:99:19: error: 'class HardwareSerial' has no member named 'baud'
     baud = Serial.baud();
                   ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastBLE/examples/SerialNINAPassthrough/SerialNINAPassthrough.ino:101:5: error: 'SerialNina' was not declared in this scope
     SerialNina.begin(baud);
     ^

examples/multiplication

Result: FAIL

WARNING: library FastBLE claims to run on samd architecture(s) and may be incompatible with your current board which runs on esp32 architecture(s).
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastBLE/src/FastBle.cpp: In member function 'void BLEClass::init_if_not_initialized()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastBLE/src/FastBle.cpp:12:11: error: 'NINA_RESETN' was not declared in this scope
   pinMode(NINA_RESETN, OUTPUT);
           ^