This report was generated on Wednesday, 23-Feb-22 22:48:15 CET using arduino-testlib.
Version: 3.5.0
More details
| Board | Claims compatibility | Inclusion | Fire2012WithPalette |
Multiple |
Pacifica |
Ports |
SmartMatrix |
AnalogOutput |
Blink |
ColorTemperature |
RGBCalibrate |
TwinkleFox |
ColorPalette |
Fire2012 |
FirstLight |
Noise |
NoisePlayground |
RGBSetDemo |
Pintest |
Pride2015 |
XYMatrix |
Cylon |
DemoReel100 |
NoisePlusPalette |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
arduino:avr:uno
1.8.4 |
Yes | PASS | PASS | FAIL | PASS | FAIL | FAIL | PASS | PASS | PASS | PASS | PASS | PASS | PASS | PASS | PASS | PASS | PASS | PASS | PASS | PASS | PASS | PASS | PASS |
|
arduino:mbed_nano:nanorp2040connect
2.7.2 |
Yes ⚠️ | FAIL | FAIL | FAIL | FAIL | FAIL | FAIL | FAIL | FAIL | FAIL | FAIL | FAIL | FAIL | FAIL | FAIL | FAIL | FAIL | FAIL | FAIL | FAIL | FAIL | FAIL | FAIL | FAIL |
|
arduino:megaavr:nona4809
1.8.7 |
Yes | PASS | FAIL | FAIL | PASS | FAIL | FAIL | PASS | PASS | PASS | PASS | PASS | FAIL | FAIL | PASS | PASS | PASS | PASS | FAIL | PASS | PASS | PASS | PASS | PASS |
|
arduino:samd:mkrwifi1010
1.8.12 |
Yes | PASS | PASS | FAIL | PASS | FAIL | FAIL | PASS | PASS | PASS | PASS | PASS | PASS | PASS | PASS | PASS | PASS | PASS | FAIL | PASS | PASS | PASS | PASS | PASS |
|
esp32:esp32:d1_mini32
1.0.6 |
Yes | PASS | FAIL | FAIL | PASS | FAIL | FAIL | FAIL | PASS | PASS | PASS | PASS | PASS | PASS | PASS | PASS | PASS | PASS | PASS | PASS | PASS | PASS | PASS | PASS |
Result: PASS
Sketch uses 512 bytes (1%) of program storage space. Maximum is 32256 bytes. Global variables use 22 bytes (1%) of dynamic memory, leaving 2026 bytes for local variables. Maximum is 2048 bytes.
Result: PASS
Sketch uses 1554 bytes (4%) of program storage space. Maximum is 32256 bytes. Global variables use 23 bytes (1%) of dynamic memory, leaving 2025 bytes for local variables. Maximum is 2048 bytes.
Result: PASS
Sketch uses 3622 bytes (11%) of program storage space. Maximum is 32256 bytes. Global variables use 100 bytes (4%) of dynamic memory, leaving 1948 bytes for local variables. Maximum is 2048 bytes.
Result: PASS
Sketch uses 5100 bytes (15%) of program storage space. Maximum is 32256 bytes. Global variables use 302 bytes (14%) of dynamic memory, leaving 1746 bytes for local variables. Maximum is 2048 bytes.
Result: PASS
Sketch uses 4174 bytes (12%) of program storage space. Maximum is 32256 bytes. Global variables use 278 bytes (13%) of dynamic memory, leaving 1770 bytes for local variables. Maximum is 2048 bytes.
Result: PASS
Sketch uses 5098 bytes (15%) of program storage space. Maximum is 32256 bytes. Global variables use 481 bytes (23%) of dynamic memory, leaving 1567 bytes for local variables. Maximum is 2048 bytes.
Result: PASS
Sketch uses 5832 bytes (18%) of program storage space. Maximum is 32256 bytes. Global variables use 373 bytes (18%) of dynamic memory, leaving 1675 bytes for local variables. Maximum is 2048 bytes.
Result: PASS
Sketch uses 3966 bytes (12%) of program storage space. Maximum is 32256 bytes. Global variables use 219 bytes (10%) of dynamic memory, leaving 1829 bytes for local variables. Maximum is 2048 bytes.
Result: PASS
Sketch uses 4596 bytes (14%) of program storage space. Maximum is 32256 bytes. Global variables use 271 bytes (13%) of dynamic memory, leaving 1777 bytes for local variables. Maximum is 2048 bytes.
Result: PASS
Sketch uses 3584 bytes (11%) of program storage space. Maximum is 32256 bytes. Global variables use 277 bytes (13%) of dynamic memory, leaving 1771 bytes for local variables. Maximum is 2048 bytes.
Result: FAIL
Result: PASS
Sketch uses 5318 bytes (16%) of program storage space. Maximum is 32256 bytes. Global variables use 1386 bytes (67%) of dynamic memory, leaving 662 bytes for local variables. Maximum is 2048 bytes.
Result: PASS
Sketch uses 9678 bytes (30%) of program storage space. Maximum is 32256 bytes. Global variables use 1076 bytes (52%) of dynamic memory, leaving 972 bytes for local variables. Maximum is 2048 bytes.
Result: PASS
Sketch uses 7878 bytes (24%) of program storage space. Maximum is 32256 bytes. Global variables use 1184 bytes (57%) of dynamic memory, leaving 864 bytes for local variables. Maximum is 2048 bytes.
Result: PASS
Sketch uses 6426 bytes (19%) of program storage space. Maximum is 32256 bytes. Global variables use 489 bytes (23%) of dynamic memory, leaving 1559 bytes for local variables. Maximum is 2048 bytes.
Result: PASS
Sketch uses 10212 bytes (31%) of program storage space. Maximum is 32256 bytes. Global variables use 400 bytes (19%) of dynamic memory, leaving 1648 bytes for local variables. Maximum is 2048 bytes.
Result: FAIL
Result: PASS
Sketch uses 4422 bytes (13%) of program storage space. Maximum is 32256 bytes. Global variables use 735 bytes (35%) of dynamic memory, leaving 1313 bytes for local variables. Maximum is 2048 bytes.
Result: PASS
Sketch uses 1090 bytes (3%) of program storage space. Maximum is 32256 bytes. Global variables use 32 bytes (1%) of dynamic memory, leaving 2016 bytes for local variables. Maximum is 2048 bytes.
Result: PASS
Sketch uses 3932 bytes (12%) of program storage space. Maximum is 32256 bytes. Global variables use 225 bytes (10%) of dynamic memory, leaving 1823 bytes for local variables. Maximum is 2048 bytes.
Result: FAIL
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastLED/examples/SmartMatrix/SmartMatrix.ino:1:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SmartMatrix/src/SmartMatrix.h:74:19: error: No MatrixHardware*.h file included - You must include one at the top of your sketch
#pragma GCC error "No MatrixHardware*.h file included - You must include one at the top of your sketch"
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Result: PASS
Sketch uses 5962 bytes (18%) of program storage space. Maximum is 32256 bytes. Global variables use 561 bytes (27%) of dynamic memory, leaving 1487 bytes for local variables. Maximum is 2048 bytes.
Result: PASS
Sketch uses 4044 bytes (12%) of program storage space. Maximum is 32256 bytes. Global variables use 900 bytes (43%) of dynamic memory, leaving 1148 bytes for local variables. Maximum is 2048 bytes.
Result: FAIL
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastLED/src/FastLED.h:43:0,
from /tmp/arduino-testlib1064042670/test/test.ino:1:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastLED/src/led_sysdefs.h:55:2: error: #error "This platform isn't recognized by FastLED... yet. See comments in FastLED/led_sysdefs.h for options."
#error "This platform isn't recognized by FastLED... yet. See comments in FastLED/led_sysdefs.h for options."
^~~~~
Result: FAIL
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastLED/src/FastLED.h:43:0,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastLED/examples/AnalogOutput/AnalogOutput.ino:1:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastLED/src/led_sysdefs.h:55:2: error: #error "This platform isn't recognized by FastLED... yet. See comments in FastLED/led_sysdefs.h for options."
#error "This platform isn't recognized by FastLED... yet. See comments in FastLED/led_sysdefs.h for options."
^~~~~
Result: FAIL
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastLED/src/FastLED.h:43:0,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastLED/examples/Blink/Blink.ino:1:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastLED/src/led_sysdefs.h:55:2: error: #error "This platform isn't recognized by FastLED... yet. See comments in FastLED/led_sysdefs.h for options."
#error "This platform isn't recognized by FastLED... yet. See comments in FastLED/led_sysdefs.h for options."
^~~~~
Result: FAIL
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastLED/src/FastLED.h:43:0,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastLED/examples/ColorPalette/ColorPalette.ino:1:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastLED/src/led_sysdefs.h:55:2: error: #error "This platform isn't recognized by FastLED... yet. See comments in FastLED/led_sysdefs.h for options."
#error "This platform isn't recognized by FastLED... yet. See comments in FastLED/led_sysdefs.h for options."
^~~~~
Result: FAIL
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastLED/src/FastLED.h:43:0,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastLED/examples/ColorTemperature/ColorTemperature.ino:1:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastLED/src/led_sysdefs.h:55:2: error: #error "This platform isn't recognized by FastLED... yet. See comments in FastLED/led_sysdefs.h for options."
#error "This platform isn't recognized by FastLED... yet. See comments in FastLED/led_sysdefs.h for options."
^~~~~
Result: FAIL
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastLED/src/FastLED.h:43:0,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastLED/examples/Cylon/Cylon.ino:1:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastLED/src/led_sysdefs.h:55:2: error: #error "This platform isn't recognized by FastLED... yet. See comments in FastLED/led_sysdefs.h for options."
#error "This platform isn't recognized by FastLED... yet. See comments in FastLED/led_sysdefs.h for options."
^~~~~
Result: FAIL
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastLED/src/FastLED.h:43:0,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastLED/examples/DemoReel100/DemoReel100.ino:1:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastLED/src/led_sysdefs.h:55:2: error: #error "This platform isn't recognized by FastLED... yet. See comments in FastLED/led_sysdefs.h for options."
#error "This platform isn't recognized by FastLED... yet. See comments in FastLED/led_sysdefs.h for options."
^~~~~
Result: FAIL
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastLED/src/FastLED.h:43:0,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastLED/examples/Fire2012/Fire2012.ino:1:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastLED/src/led_sysdefs.h:55:2: error: #error "This platform isn't recognized by FastLED... yet. See comments in FastLED/led_sysdefs.h for options."
#error "This platform isn't recognized by FastLED... yet. See comments in FastLED/led_sysdefs.h for options."
^~~~~
Result: FAIL
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastLED/src/FastLED.h:43:0,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastLED/examples/Fire2012WithPalette/Fire2012WithPalette.ino:1:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastLED/src/led_sysdefs.h:55:2: error: #error "This platform isn't recognized by FastLED... yet. See comments in FastLED/led_sysdefs.h for options."
#error "This platform isn't recognized by FastLED... yet. See comments in FastLED/led_sysdefs.h for options."
^~~~~
Result: FAIL
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastLED/src/FastLED.h:43:0,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastLED/examples/FirstLight/FirstLight.ino:6:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastLED/src/led_sysdefs.h:55:2: error: #error "This platform isn't recognized by FastLED... yet. See comments in FastLED/led_sysdefs.h for options."
#error "This platform isn't recognized by FastLED... yet. See comments in FastLED/led_sysdefs.h for options."
^~~~~
Result: FAIL
Result: FAIL
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastLED/src/FastLED.h:43:0,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastLED/examples/Noise/Noise.ino:1:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastLED/src/led_sysdefs.h:55:2: error: #error "This platform isn't recognized by FastLED... yet. See comments in FastLED/led_sysdefs.h for options."
#error "This platform isn't recognized by FastLED... yet. See comments in FastLED/led_sysdefs.h for options."
^~~~~
Result: FAIL
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastLED/src/FastLED.h:43:0,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastLED/examples/NoisePlayground/NoisePlayground.ino:1:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastLED/src/led_sysdefs.h:55:2: error: #error "This platform isn't recognized by FastLED... yet. See comments in FastLED/led_sysdefs.h for options."
#error "This platform isn't recognized by FastLED... yet. See comments in FastLED/led_sysdefs.h for options."
^~~~~
Result: FAIL
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastLED/src/FastLED.h:43:0,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastLED/examples/NoisePlusPalette/NoisePlusPalette.ino:1:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastLED/src/led_sysdefs.h:55:2: error: #error "This platform isn't recognized by FastLED... yet. See comments in FastLED/led_sysdefs.h for options."
#error "This platform isn't recognized by FastLED... yet. See comments in FastLED/led_sysdefs.h for options."
^~~~~
Result: FAIL
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastLED/src/FastLED.h:43:0,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastLED/examples/Pacifica/Pacifica.ino:9:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastLED/src/led_sysdefs.h:55:2: error: #error "This platform isn't recognized by FastLED... yet. See comments in FastLED/led_sysdefs.h for options."
#error "This platform isn't recognized by FastLED... yet. See comments in FastLED/led_sysdefs.h for options."
^~~~~
Result: FAIL
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastLED/src/FastLED.h:43:0,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastLED/examples/Pintest/Pintest.ino:2:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastLED/src/led_sysdefs.h:55:2: error: #error "This platform isn't recognized by FastLED... yet. See comments in FastLED/led_sysdefs.h for options."
#error "This platform isn't recognized by FastLED... yet. See comments in FastLED/led_sysdefs.h for options."
^~~~~
Result: FAIL
Result: FAIL
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastLED/src/FastLED.h:43:0,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastLED/examples/Pride2015/Pride2015.ino:1:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastLED/src/led_sysdefs.h:55:2: error: #error "This platform isn't recognized by FastLED... yet. See comments in FastLED/led_sysdefs.h for options."
#error "This platform isn't recognized by FastLED... yet. See comments in FastLED/led_sysdefs.h for options."
^~~~~
Result: FAIL
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastLED/src/FastLED.h:43:0,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastLED/examples/RGBCalibrate/RGBCalibrate.ino:1:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastLED/src/led_sysdefs.h:55:2: error: #error "This platform isn't recognized by FastLED... yet. See comments in FastLED/led_sysdefs.h for options."
#error "This platform isn't recognized by FastLED... yet. See comments in FastLED/led_sysdefs.h for options."
^~~~~
Result: FAIL
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastLED/src/FastLED.h:43:0,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastLED/examples/RGBSetDemo/RGBSetDemo.ino:1:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastLED/src/led_sysdefs.h:55:2: error: #error "This platform isn't recognized by FastLED... yet. See comments in FastLED/led_sysdefs.h for options."
#error "This platform isn't recognized by FastLED... yet. See comments in FastLED/led_sysdefs.h for options."
^~~~~
Result: FAIL
WARNING: library SmartMatrix claims to run on avr, esp32 architecture(s) and may be incompatible with your current board which runs on mbed_nano architecture(s).
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastLED/examples/SmartMatrix/SmartMatrix.ino:1:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SmartMatrix/src/SmartMatrix.h:74:19: error: No MatrixHardware*.h file included - You must include one at the top of your sketch
#pragma GCC error "No MatrixHardware*.h file included - You must include one at the top of your sketch"
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastLED/src/FastLED.h:43:0,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastLED/examples/SmartMatrix/SmartMatrix.ino:2:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastLED/src/led_sysdefs.h:55:2: error: #error "This platform isn't recognized by FastLED... yet. See comments in FastLED/led_sysdefs.h for options."
#error "This platform isn't recognized by FastLED... yet. See comments in FastLED/led_sysdefs.h for options."
^~~~~
Result: FAIL
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastLED/src/FastLED.h:43:0,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastLED/examples/TwinkleFox/TwinkleFox.ino:1:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastLED/src/led_sysdefs.h:55:2: error: #error "This platform isn't recognized by FastLED... yet. See comments in FastLED/led_sysdefs.h for options."
#error "This platform isn't recognized by FastLED... yet. See comments in FastLED/led_sysdefs.h for options."
^~~~~
Result: FAIL
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastLED/src/FastLED.h:43:0,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastLED/examples/XYMatrix/XYMatrix.ino:1:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastLED/src/led_sysdefs.h:55:2: error: #error "This platform isn't recognized by FastLED... yet. See comments in FastLED/led_sysdefs.h for options."
#error "This platform isn't recognized by FastLED... yet. See comments in FastLED/led_sysdefs.h for options."
^~~~~
Result: PASS
Sketch uses 870 bytes (1%) of program storage space. Maximum is 49152 bytes. Global variables use 35 bytes (0%) of dynamic memory, leaving 6109 bytes for local variables. Maximum is 6144 bytes.
Result: PASS
Sketch uses 1996 bytes (4%) of program storage space. Maximum is 49152 bytes. Global variables use 36 bytes (0%) of dynamic memory, leaving 6108 bytes for local variables. Maximum is 6144 bytes.
Result: PASS
Sketch uses 4082 bytes (8%) of program storage space. Maximum is 49152 bytes. Global variables use 79 bytes (1%) of dynamic memory, leaving 6065 bytes for local variables. Maximum is 6144 bytes.
Result: FAIL
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastLED/src/platforms/avr/fastled_avr.h:4:0,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastLED/src/platforms.h:41,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastLED/src/FastLED.h:54,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastLED/examples/ColorPalette/ColorPalette.ino:1:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastLED/src/platforms/avr/fastpin_avr.h: In instantiation of 'static void _AVRPIN<PIN, _MASK, _PORT, _DDR, _PIN>::setOutput() [with unsigned char PIN = 5; unsigned char _MASK = 4; _PORT = __gen_struct_VPORTB_OUT; _DDR = __gen_struct_VPORTB_DIR; _PIN = __gen_struct_VPORTB_IN]':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastLED/src/platforms/avr/clockless_trinket.h:114:31: required from 'void ClocklessController<DATA_PIN, T1, T2, T3, RGB_ORDER, XTRA0, FLIP, WAIT_TIME>::init() [with unsigned char DATA_PIN = 5; int T1 = 6; int T2 = 8; int T3 = 6; EOrder RGB_ORDER = (EOrder)66; int XTRA0 = 0; bool FLIP = false; int WAIT_TIME = 10]'
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastLED/examples/ColorPalette/ColorPalette.ino:164:2: required from here
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastLED/src/platforms/avr/fastpin_avr.h:22:42: error: incomplete type '__gen_struct_VPORTB_DIR' used in nested name specifier
inline static void setOutput() { _DDR::r() |= _MASK; }
~~~~~~~^~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastLED/src/platforms/avr/fastpin_avr.h: In instantiation of 'static volatile uint8_t* _AVRPIN<PIN, _MASK, _PORT, _DDR, _PIN>::port() [with unsigned char PIN = 5; unsigned char _MASK = 4; _PORT = __gen_struct_VPORTB_OUT; _DDR = __gen_struct_VPORTB_DIR; _PIN = __gen_struct_VPORTB_IN; _AVRPIN<PIN, _MASK, _PORT, _DDR, _PIN>::port_ptr_t = volatile unsigned char*; uint8_t = unsigned char]':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastLED/src/platforms/avr/clockless_trinket.h:362:44: required from 'static void ClocklessController<DATA_PIN, T1, T2, T3, RGB_ORDER, XTRA0, FLIP, WAIT_TIME>::showRGBInternal(PixelController<RGB_ORDER>&) [with unsigned char DATA_PIN = 5; int T1 = 6; int T2 = 8; int T3 = 6; EOrder RGB_ORDER = (EOrder)66; int XTRA0 = 0; bool FLIP = false; int WAIT_TIME = 10]'
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastLED/src/platforms/avr/clockless_trinket.h:126:19: required from 'void ClocklessController<DATA_PIN, T1, T2, T3, RGB_ORDER, XTRA0, FLIP, WAIT_TIME>::showPixels(PixelController<RGB_ORDER>&) [with unsigned char DATA_PIN = 5; int T1 = 6; int T2 = 8; int T3 = 6; EOrder RGB_ORDER = (EOrder)66; int XTRA0 = 0; bool FLIP = false; int WAIT_TIME = 10]'
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastLED/examples/ColorPalette/ColorPalette.ino:164:2: required from here
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastLED/src/platforms/avr/fastpin_avr.h:39:84: error: incomplete type '__gen_struct_VPORTB_OUT' used in nested name specifier
inline static port_ptr_t port() __attribute__ ((always_inline)) { return &_PORT::r(); }
~~~~~~~~^~
Result: PASS
Sketch uses 4654 bytes (9%) of program storage space. Maximum is 49152 bytes. Global variables use 257 bytes (4%) of dynamic memory, leaving 5887 bytes for local variables. Maximum is 6144 bytes.
Result: PASS
Sketch uses 6299 bytes (12%) of program storage space. Maximum is 49152 bytes. Global variables use 424 bytes (6%) of dynamic memory, leaving 5720 bytes for local variables. Maximum is 6144 bytes.
Result: PASS
Sketch uses 6281 bytes (12%) of program storage space. Maximum is 49152 bytes. Global variables use 300 bytes (4%) of dynamic memory, leaving 5844 bytes for local variables. Maximum is 6144 bytes.
Result: FAIL
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastLED/src/platforms/avr/fastled_avr.h:4:0,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastLED/src/platforms.h:41,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastLED/src/FastLED.h:54,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastLED/examples/Fire2012/Fire2012.ino:1:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastLED/src/platforms/avr/fastpin_avr.h: In instantiation of 'static void _AVRPIN<PIN, _MASK, _PORT, _DDR, _PIN>::setOutput() [with unsigned char PIN = 5; unsigned char _MASK = 4; _PORT = __gen_struct_VPORTB_OUT; _DDR = __gen_struct_VPORTB_DIR; _PIN = __gen_struct_VPORTB_IN]':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastLED/src/platforms/avr/clockless_trinket.h:114:31: required from 'void ClocklessController<DATA_PIN, T1, T2, T3, RGB_ORDER, XTRA0, FLIP, WAIT_TIME>::init() [with unsigned char DATA_PIN = 5; int T1 = 6; int T2 = 8; int T3 = 6; EOrder RGB_ORDER = (EOrder)66; int XTRA0 = 0; bool FLIP = false; int WAIT_TIME = 10]'
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastLED/examples/Fire2012/Fire2012.ino:104:1: required from here
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastLED/src/platforms/avr/fastpin_avr.h:22:42: error: incomplete type '__gen_struct_VPORTB_DIR' used in nested name specifier
inline static void setOutput() { _DDR::r() |= _MASK; }
~~~~~~~^~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastLED/src/platforms/avr/fastpin_avr.h: In instantiation of 'static volatile uint8_t* _AVRPIN<PIN, _MASK, _PORT, _DDR, _PIN>::port() [with unsigned char PIN = 5; unsigned char _MASK = 4; _PORT = __gen_struct_VPORTB_OUT; _DDR = __gen_struct_VPORTB_DIR; _PIN = __gen_struct_VPORTB_IN; _AVRPIN<PIN, _MASK, _PORT, _DDR, _PIN>::port_ptr_t = volatile unsigned char*; uint8_t = unsigned char]':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastLED/src/platforms/avr/clockless_trinket.h:362:44: required from 'static void ClocklessController<DATA_PIN, T1, T2, T3, RGB_ORDER, XTRA0, FLIP, WAIT_TIME>::showRGBInternal(PixelController<RGB_ORDER>&) [with unsigned char DATA_PIN = 5; int T1 = 6; int T2 = 8; int T3 = 6; EOrder RGB_ORDER = (EOrder)66; int XTRA0 = 0; bool FLIP = false; int WAIT_TIME = 10]'
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastLED/src/platforms/avr/clockless_trinket.h:126:19: required from 'void ClocklessController<DATA_PIN, T1, T2, T3, RGB_ORDER, XTRA0, FLIP, WAIT_TIME>::showPixels(PixelController<RGB_ORDER>&) [with unsigned char DATA_PIN = 5; int T1 = 6; int T2 = 8; int T3 = 6; EOrder RGB_ORDER = (EOrder)66; int XTRA0 = 0; bool FLIP = false; int WAIT_TIME = 10]'
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastLED/examples/Fire2012/Fire2012.ino:104:1: required from here
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastLED/src/platforms/avr/fastpin_avr.h:39:84: error: incomplete type '__gen_struct_VPORTB_OUT' used in nested name specifier
inline static port_ptr_t port() __attribute__ ((always_inline)) { return &_PORT::r(); }
~~~~~~~~^~
Result: FAIL
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastLED/src/platforms/avr/fastled_avr.h:4:0,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastLED/src/platforms.h:41,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastLED/src/FastLED.h:54,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastLED/examples/Fire2012WithPalette/Fire2012WithPalette.ino:1:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastLED/src/platforms/avr/fastpin_avr.h: In instantiation of 'static void _AVRPIN<PIN, _MASK, _PORT, _DDR, _PIN>::setOutput() [with unsigned char PIN = 5; unsigned char _MASK = 4; _PORT = __gen_struct_VPORTB_OUT; _DDR = __gen_struct_VPORTB_DIR; _PIN = __gen_struct_VPORTB_IN]':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastLED/src/platforms/avr/clockless_trinket.h:114:31: required from 'void ClocklessController<DATA_PIN, T1, T2, T3, RGB_ORDER, XTRA0, FLIP, WAIT_TIME>::init() [with unsigned char DATA_PIN = 5; int T1 = 6; int T2 = 8; int T3 = 6; EOrder RGB_ORDER = (EOrder)66; int XTRA0 = 0; bool FLIP = false; int WAIT_TIME = 10]'
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastLED/examples/Fire2012WithPalette/Fire2012WithPalette.ino:163:1: required from here
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastLED/src/platforms/avr/fastpin_avr.h:22:42: error: incomplete type '__gen_struct_VPORTB_DIR' used in nested name specifier
inline static void setOutput() { _DDR::r() |= _MASK; }
~~~~~~~^~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastLED/src/platforms/avr/fastpin_avr.h: In instantiation of 'static volatile uint8_t* _AVRPIN<PIN, _MASK, _PORT, _DDR, _PIN>::port() [with unsigned char PIN = 5; unsigned char _MASK = 4; _PORT = __gen_struct_VPORTB_OUT; _DDR = __gen_struct_VPORTB_DIR; _PIN = __gen_struct_VPORTB_IN; _AVRPIN<PIN, _MASK, _PORT, _DDR, _PIN>::port_ptr_t = volatile unsigned char*; uint8_t = unsigned char]':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastLED/src/platforms/avr/clockless_trinket.h:362:44: required from 'static void ClocklessController<DATA_PIN, T1, T2, T3, RGB_ORDER, XTRA0, FLIP, WAIT_TIME>::showRGBInternal(PixelController<RGB_ORDER>&) [with unsigned char DATA_PIN = 5; int T1 = 6; int T2 = 8; int T3 = 6; EOrder RGB_ORDER = (EOrder)66; int XTRA0 = 0; bool FLIP = false; int WAIT_TIME = 10]'
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastLED/src/platforms/avr/clockless_trinket.h:126:19: required from 'void ClocklessController<DATA_PIN, T1, T2, T3, RGB_ORDER, XTRA0, FLIP, WAIT_TIME>::showPixels(PixelController<RGB_ORDER>&) [with unsigned char DATA_PIN = 5; int T1 = 6; int T2 = 8; int T3 = 6; EOrder RGB_ORDER = (EOrder)66; int XTRA0 = 0; bool FLIP = false; int WAIT_TIME = 10]'
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastLED/examples/Fire2012WithPalette/Fire2012WithPalette.ino:163:1: required from here
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastLED/src/platforms/avr/fastpin_avr.h:39:84: error: incomplete type '__gen_struct_VPORTB_OUT' used in nested name specifier
inline static port_ptr_t port() __attribute__ ((always_inline)) { return &_PORT::r(); }
~~~~~~~~^~
Result: PASS
Sketch uses 4064 bytes (8%) of program storage space. Maximum is 49152 bytes. Global variables use 256 bytes (4%) of dynamic memory, leaving 5888 bytes for local variables. Maximum is 6144 bytes.
Result: FAIL
Result: PASS
Sketch uses 5790 bytes (11%) of program storage space. Maximum is 49152 bytes. Global variables use 1365 bytes (22%) of dynamic memory, leaving 4779 bytes for local variables. Maximum is 6144 bytes.
Result: PASS
Sketch uses 10832 bytes (22%) of program storage space. Maximum is 49152 bytes. Global variables use 1021 bytes (16%) of dynamic memory, leaving 5123 bytes for local variables. Maximum is 6144 bytes.
Result: PASS
Sketch uses 8330 bytes (16%) of program storage space. Maximum is 49152 bytes. Global variables use 1163 bytes (18%) of dynamic memory, leaving 4981 bytes for local variables. Maximum is 6144 bytes.
Result: PASS
Sketch uses 6927 bytes (14%) of program storage space. Maximum is 49152 bytes. Global variables use 428 bytes (6%) of dynamic memory, leaving 5716 bytes for local variables. Maximum is 6144 bytes.
Result: FAIL
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastLED/src/platforms/avr/fastled_avr.h:4:0,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastLED/src/platforms.h:41,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastLED/src/FastLED.h:54,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastLED/examples/Pintest/Pintest.ino:2:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastLED/src/platforms/avr/fastpin_avr.h: In instantiation of 'static volatile uint8_t* _AVRPIN<PIN, _MASK, _PORT, _DDR, _PIN>::port() [with unsigned char PIN = 21; unsigned char _MASK = 32; _PORT = __gen_struct_VPORTD_OUT; _DDR = __gen_struct_VPORTD_DIR; _PIN = __gen_struct_VPORTD_IN; _AVRPIN<PIN, _MASK, _PORT, _DDR, _PIN>::port_ptr_t = volatile unsigned char*; uint8_t = unsigned char]':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastLED/examples/Pintest/Pintest.ino:102:52: required from 'void CheckPin() [with unsigned char PIN = 21]'
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastLED/examples/Pintest/Pintest.ino:95:19: required from 'void CheckPin() [with unsigned char PIN = 22]'
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastLED/examples/Pintest/Pintest.ino:189:20: required from here
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastLED/src/platforms/avr/fastpin_avr.h:39:84: error: incomplete type '__gen_struct_VPORTD_OUT' used in nested name specifier
inline static port_ptr_t port() __attribute__ ((always_inline)) { return &_PORT::r(); }
~~~~~~~~^~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastLED/src/platforms/avr/fastpin_avr.h: In instantiation of 'static volatile uint8_t* _AVRPIN<PIN, _MASK, _PORT, _DDR, _PIN>::port() [with unsigned char PIN = 20; unsigned char _MASK = 16; _PORT = __gen_struct_VPORTD_OUT; _DDR = __gen_struct_VPORTD_DIR; _PIN = __gen_struct_VPORTD_IN; _AVRPIN<PIN, _MASK, _PORT, _DDR, _PIN>::port_ptr_t = volatile unsigned char*; uint8_t = unsigned char]':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastLED/examples/Pintest/Pintest.ino:95:19: recursively required from 'void CheckPin() [with unsigned char PIN = 21]'
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastLED/examples/Pintest/Pintest.ino:95:19: required from 'void CheckPin() [with unsigned char PIN = 22]'
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastLED/examples/Pintest/Pintest.ino:189:20: required from here
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastLED/src/platforms/avr/fastpin_avr.h:39:84: error: incomplete type '__gen_struct_VPORTD_OUT' used in nested name specifier
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastLED/src/platforms/avr/fastpin_avr.h: In instantiation of 'static volatile uint8_t* _AVRPIN<PIN, _MASK, _PORT, _DDR, _PIN>::port() [with unsigned char PIN = 17; unsigned char _MASK = 1; _PORT = __gen_struct_VPORTD_OUT; _DDR = __gen_struct_VPORTD_DIR; _PIN = __gen_struct_VPORTD_IN; _AVRPIN<PIN, _MASK, _PORT, _DDR, _PIN>::port_ptr_t = volatile unsigned char*; uint8_t = unsigned char]':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastLED/examples/Pintest/Pintest.ino:95:19: recursively required from 'void CheckPin() [with unsigned char PIN = 21]'
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastLED/examples/Pintest/Pintest.ino:95:19: required from 'void CheckPin() [with unsigned char PIN = 22]'
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastLED/examples/Pintest/Pintest.ino:189:20: required from here
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastLED/src/platforms/avr/fastpin_avr.h:39:84: error: incomplete type '__gen_struct_VPORTD_OUT' used in nested name specifier
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastLED/src/platforms/avr/fastpin_avr.h: In instantiation of 'static volatile uint8_t* _AVRPIN<PIN, _MASK, _PORT, _DDR, _PIN>::port() [with unsigned char PIN = 16; unsigned char _MASK = 2; _PORT = __gen_struct_VPORTD_OUT; _DDR = __gen_struct_VPORTD_DIR; _PIN = __gen_struct_VPORTD_IN; _AVRPIN<PIN, _MASK, _PORT, _DDR, _PIN>::port_ptr_t = volatile unsigned char*; uint8_t = unsigned char]':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastLED/examples/Pintest/Pintest.ino:95:19: recursively required from 'void CheckPin() [with unsigned char PIN = 21]'
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastLED/examples/Pintest/Pintest.ino:95:19: required from 'void CheckPin() [with unsigned char PIN = 22]'
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastLED/examples/Pintest/Pintest.ino:189:20: required from here
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastLED/src/platforms/avr/fastpin_avr.h:39:84: error: incomplete type '__gen_struct_VPORTD_OUT' used in nested name specifier
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastLED/src/platforms/avr/fastpin_avr.h: In instantiation of 'static volatile uint8_t* _AVRPIN<PIN, _MASK, _PORT, _DDR, _PIN>::port() [with unsigned char PIN = 15; unsigned char _MASK = 4; _PORT = __gen_struct_VPORTD_OUT; _DDR = __gen_struct_VPORTD_DIR; _PIN = __gen_struct_VPORTD_IN; _AVRPIN<PIN, _MASK, _PORT, _DDR, _PIN>::port_ptr_t = volatile unsigned char*; uint8_t = unsigned char]':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastLED/examples/Pintest/Pintest.ino:95:19: recursively required from 'void CheckPin() [with unsigned char PIN = 21]'
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastLED/examples/Pintest/Pintest.ino:95:19: required from 'void CheckPin() [with unsigned char PIN = 22]'
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastLED/examples/Pintest/Pintest.ino:189:20: required from here
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastLED/src/platforms/avr/fastpin_avr.h:39:84: error: incomplete type '__gen_struct_VPORTD_OUT' used in nested name specifier
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastLED/src/platforms/avr/fastpin_avr.h: In instantiation of 'static volatile uint8_t* _AVRPIN<PIN, _MASK, _PORT, _DDR, _PIN>::port() [with unsigned char PIN = 14; unsigned char _MASK = 8; _PORT = __gen_struct_VPORTD_OUT; _DDR = __gen_struct_VPORTD_DIR; _PIN = __gen_struct_VPORTD_IN; _AVRPIN<PIN, _MASK, _PORT, _DDR, _PIN>::port_ptr_t = volatile unsigned char*; uint8_t = unsigned char]':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastLED/examples/Pintest/Pintest.ino:95:19: recursively required from 'void CheckPin() [with unsigned char PIN = 21]'
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastLED/examples/Pintest/Pintest.ino:95:19: required from 'void CheckPin() [with unsigned char PIN = 22]'
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastLED/examples/Pintest/Pintest.ino:189:20: required from here
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastLED/src/platforms/avr/fastpin_avr.h:39:84: error: incomplete type '__gen_struct_VPORTD_OUT' used in nested name specifier
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastLED/src/platforms/avr/fastpin_avr.h: In instantiation of 'static volatile uint8_t* _AVRPIN<PIN, _MASK, _PORT, _DDR, _PIN>::port() [with unsigned char PIN = 10; unsigned char _MASK = 2; _PORT = __gen_struct_VPORTB_OUT; _DDR = __gen_struct_VPORTB_DIR; _PIN = __gen_struct_VPORTB_IN; _AVRPIN<PIN, _MASK, _PORT, _DDR, _PIN>::port_ptr_t = volatile unsigned char*; uint8_t = unsigned char]':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastLED/examples/Pintest/Pintest.ino:95:19: recursively required from 'void CheckPin() [with unsigned char PIN = 21]'
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastLED/examples/Pintest/Pintest.ino:95:19: required from 'void CheckPin() [with unsigned char PIN = 22]'
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastLED/examples/Pintest/Pintest.ino:189:20: required from here
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastLED/src/platforms/avr/fastpin_avr.h:39:84: error: incomplete type '__gen_struct_VPORTB_OUT' used in nested name specifier
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastLED/src/platforms/avr/fastpin_avr.h: In instantiation of 'static volatile uint8_t* _AVRPIN<PIN, _MASK, _PORT, _DDR, _PIN>::port() [with unsigned char PIN = 9; unsigned char _MASK = 1; _PORT = __gen_struct_VPORTB_OUT; _DDR = __gen_struct_VPORTB_DIR; _PIN = __gen_struct_VPORTB_IN; _AVRPIN<PIN, _MASK, _PORT, _DDR, _PIN>::port_ptr_t = volatile unsigned char*; uint8_t = unsigned char]':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastLED/examples/Pintest/Pintest.ino:95:19: recursively required from 'void CheckPin() [with unsigned char PIN = 21]'
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastLED/examples/Pintest/Pintest.ino:95:19: required from 'void CheckPin() [with unsigned char PIN = 22]'
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastLED/examples/Pintest/Pintest.ino:189:20: required from here
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastLED/src/platforms/avr/fastpin_avr.h:39:84: error: incomplete type '__gen_struct_VPORTB_OUT' used in nested name specifier
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastLED/src/platforms/avr/fastpin_avr.h: In instantiation of 'static volatile uint8_t* _AVRPIN<PIN, _MASK, _PORT, _DDR, _PIN>::port() [with unsigned char PIN = 5; unsigned char _MASK = 4; _PORT = __gen_struct_VPORTB_OUT; _DDR = __gen_struct_VPORTB_DIR; _PIN = __gen_struct_VPORTB_IN; _AVRPIN<PIN, _MASK, _PORT, _DDR, _PIN>::port_ptr_t = volatile unsigned char*; uint8_t = unsigned char]':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastLED/examples/Pintest/Pintest.ino:95:19: recursively required fr
Result: FAIL
Result: PASS
Sketch uses 4893 bytes (9%) of program storage space. Maximum is 49152 bytes. Global variables use 682 bytes (11%) of dynamic memory, leaving 5462 bytes for local variables. Maximum is 6144 bytes.
Result: PASS
Sketch uses 1516 bytes (3%) of program storage space. Maximum is 49152 bytes. Global variables use 45 bytes (0%) of dynamic memory, leaving 6099 bytes for local variables. Maximum is 6144 bytes.
Result: PASS
Sketch uses 4432 bytes (9%) of program storage space. Maximum is 49152 bytes. Global variables use 204 bytes (3%) of dynamic memory, leaving 5940 bytes for local variables. Maximum is 6144 bytes.
Result: FAIL
WARNING: library SmartMatrix claims to run on avr, esp32 architecture(s) and may be incompatible with your current board which runs on megaavr architecture(s).
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastLED/examples/SmartMatrix/SmartMatrix.ino:1:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SmartMatrix/src/SmartMatrix.h:74:19: error: No MatrixHardware*.h file included - You must include one at the top of your sketch
#pragma GCC error "No MatrixHardware*.h file included - You must include one at the top of your sketch"
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Result: PASS
Sketch uses 6458 bytes (13%) of program storage space. Maximum is 49152 bytes. Global variables use 512 bytes (8%) of dynamic memory, leaving 5632 bytes for local variables. Maximum is 6144 bytes.
Result: PASS
Sketch uses 4527 bytes (9%) of program storage space. Maximum is 49152 bytes. Global variables use 847 bytes (13%) of dynamic memory, leaving 5297 bytes for local variables. Maximum is 6144 bytes.
Result: PASS
Sketch uses 12180 bytes (4%) of program storage space. Maximum is 262144 bytes. Global variables use 3012 bytes (9%) of dynamic memory, leaving 29756 bytes for local variables. Maximum is 32768 bytes.
Result: PASS
Sketch uses 13180 bytes (5%) of program storage space. Maximum is 262144 bytes. Global variables use 3056 bytes (9%) of dynamic memory, leaving 29712 bytes for local variables. Maximum is 32768 bytes.
Result: PASS
Sketch uses 15116 bytes (5%) of program storage space. Maximum is 262144 bytes. Global variables use 3080 bytes (9%) of dynamic memory, leaving 29688 bytes for local variables. Maximum is 32768 bytes.
Result: PASS
Sketch uses 16712 bytes (6%) of program storage space. Maximum is 262144 bytes. Global variables use 3276 bytes (9%) of dynamic memory, leaving 29492 bytes for local variables. Maximum is 32768 bytes.
Result: PASS
Sketch uses 15764 bytes (6%) of program storage space. Maximum is 262144 bytes. Global variables use 3260 bytes (9%) of dynamic memory, leaving 29508 bytes for local variables. Maximum is 32768 bytes.
Result: PASS
Sketch uses 15692 bytes (5%) of program storage space. Maximum is 262144 bytes. Global variables use 3272 bytes (9%) of dynamic memory, leaving 29496 bytes for local variables. Maximum is 32768 bytes.
Result: PASS
Sketch uses 16920 bytes (6%) of program storage space. Maximum is 262144 bytes. Global variables use 3324 bytes (10%) of dynamic memory, leaving 29444 bytes for local variables. Maximum is 32768 bytes.
Result: PASS
Sketch uses 15524 bytes (5%) of program storage space. Maximum is 262144 bytes. Global variables use 3200 bytes (9%) of dynamic memory, leaving 29568 bytes for local variables. Maximum is 32768 bytes.
Result: PASS
Sketch uses 15964 bytes (6%) of program storage space. Maximum is 262144 bytes. Global variables use 3248 bytes (9%) of dynamic memory, leaving 29520 bytes for local variables. Maximum is 32768 bytes.
Result: PASS
Sketch uses 15200 bytes (5%) of program storage space. Maximum is 262144 bytes. Global variables use 3256 bytes (9%) of dynamic memory, leaving 29512 bytes for local variables. Maximum is 32768 bytes.
Result: FAIL
Result: PASS
Sketch uses 17060 bytes (6%) of program storage space. Maximum is 262144 bytes. Global variables use 4380 bytes (13%) of dynamic memory, leaving 28388 bytes for local variables. Maximum is 32768 bytes.
Result: PASS
Sketch uses 19464 bytes (7%) of program storage space. Maximum is 262144 bytes. Global variables use 3912 bytes (11%) of dynamic memory, leaving 28856 bytes for local variables. Maximum is 32768 bytes.
Result: PASS
Sketch uses 19016 bytes (7%) of program storage space. Maximum is 262144 bytes. Global variables use 4172 bytes (12%) of dynamic memory, leaving 28596 bytes for local variables. Maximum is 32768 bytes.
Result: PASS
Sketch uses 17272 bytes (6%) of program storage space. Maximum is 262144 bytes. Global variables use 3428 bytes (10%) of dynamic memory, leaving 29340 bytes for local variables. Maximum is 32768 bytes.
Result: FAIL
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastLED/src/FastLED.h:50:0,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastLED/examples/Pintest/Pintest.ino:2:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastLED/src/fastpin.h: In instantiation of 'class FastPin<22>':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastLED/examples/Pintest/Pintest.ino:102:52: required from 'void CheckPin() [with unsigned char PIN = 22]'
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastLED/examples/Pintest/Pintest.ino:189:20: required from here
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastLED/src/fastpin.h:210:2: error: static assertion failed: Invalid pin specified
static_assert(validpin(), "Invalid pin specified");
^~~~~~~~~~~~~
Result: FAIL
Result: PASS
Sketch uses 15968 bytes (6%) of program storage space. Maximum is 262144 bytes. Global variables use 3684 bytes (11%) of dynamic memory, leaving 29084 bytes for local variables. Maximum is 32768 bytes.
Result: PASS
Sketch uses 12576 bytes (4%) of program storage space. Maximum is 262144 bytes. Global variables use 3052 bytes (9%) of dynamic memory, leaving 29716 bytes for local variables. Maximum is 32768 bytes.
Result: PASS
Sketch uses 15572 bytes (5%) of program storage space. Maximum is 262144 bytes. Global variables use 3216 bytes (9%) of dynamic memory, leaving 29552 bytes for local variables. Maximum is 32768 bytes.
Result: FAIL
WARNING: library SmartMatrix claims to run on avr, esp32 architecture(s) and may be incompatible with your current board which runs on samd architecture(s).
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastLED/examples/SmartMatrix/SmartMatrix.ino:1:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SmartMatrix/src/SmartMatrix.h:74:19: error: No MatrixHardware*.h file included - You must include one at the top of your sketch
#pragma GCC error "No MatrixHardware*.h file included - You must include one at the top of your sketch"
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Result: PASS
Sketch uses 17300 bytes (6%) of program storage space. Maximum is 262144 bytes. Global variables use 3564 bytes (10%) of dynamic memory, leaving 29204 bytes for local variables. Maximum is 32768 bytes.
Result: PASS
Sketch uses 15784 bytes (6%) of program storage space. Maximum is 262144 bytes. Global variables use 3848 bytes (11%) of dynamic memory, leaving 28920 bytes for local variables. Maximum is 32768 bytes.
Result: PASS
Sketch uses 198730 bytes (15%) of program storage space. Maximum is 1310720 bytes.
Global variables use 13188 bytes (4%) of dynamic memory, leaving 314492 bytes for local variables. Maximum is 327680 bytes.
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastLED/src/FastLED.h:67:0,
from /tmp/arduino-testlib1064042670/test/test.ino:1:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastLED/src/fastspi.h:145:23: note: #pragma message: No hardware SPI pins defined. All SPI access will default to bitbanged output
# pragma message "No hardware SPI pins defined. All SPI access will default to bitbanged output"
^
Result: FAIL
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastLED/src/FastLED.h:67:0,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastLED/examples/AnalogOutput/AnalogOutput.ino:1:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastLED/src/fastspi.h:145:23: note: #pragma message: No hardware SPI pins defined. All SPI access will default to bitbanged output
# pragma message "No hardware SPI pins defined. All SPI access will default to bitbanged output"
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastLED/examples/AnalogOutput/AnalogOutput.ino: In function 'void showAnalogRGB(const CRGB&)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastLED/examples/AnalogOutput/AnalogOutput.ino:29:31: error: 'analogWrite' was not declared in this scope
analogWrite(REDPIN, rgb.r );
^
Result: PASS
Sketch uses 211570 bytes (16%) of program storage space. Maximum is 1310720 bytes.
Global variables use 13552 bytes (4%) of dynamic memory, leaving 314128 bytes for local variables. Maximum is 327680 bytes.
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastLED/src/FastLED.h:67:0,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastLED/examples/Blink/Blink.ino:1:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastLED/src/fastspi.h:145:23: note: #pragma message: No hardware SPI pins defined. All SPI access will default to bitbanged output
# pragma message "No hardware SPI pins defined. All SPI access will default to bitbanged output"
^
Result: PASS
Sketch uses 213514 bytes (16%) of program storage space. Maximum is 1310720 bytes.
Global variables use 13752 bytes (4%) of dynamic memory, leaving 313928 bytes for local variables. Maximum is 327680 bytes.
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastLED/src/FastLED.h:67:0,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastLED/examples/ColorPalette/ColorPalette.ino:1:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastLED/src/fastspi.h:145:23: note: #pragma message: No hardware SPI pins defined. All SPI access will default to bitbanged output
# pragma message "No hardware SPI pins defined. All SPI access will default to bitbanged output"
^
Result: PASS
Sketch uses 212246 bytes (16%) of program storage space. Maximum is 1310720 bytes.
Global variables use 13728 bytes (4%) of dynamic memory, leaving 313952 bytes for local variables. Maximum is 327680 bytes.
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastLED/src/FastLED.h:67:0,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastLED/examples/ColorTemperature/ColorTemperature.ino:1:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastLED/src/fastspi.h:145:23: note: #pragma message: No hardware SPI pins defined. All SPI access will default to bitbanged output
# pragma message "No hardware SPI pins defined. All SPI access will default to bitbanged output"
^
Result: PASS
Sketch uses 218674 bytes (16%) of program storage space. Maximum is 1310720 bytes.
Global variables use 14056 bytes (4%) of dynamic memory, leaving 313624 bytes for local variables. Maximum is 327680 bytes.
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastLED/src/FastLED.h:67:0,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastLED/examples/Cylon/Cylon.ino:1:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastLED/src/fastspi.h:145:23: note: #pragma message: No hardware SPI pins defined. All SPI access will default to bitbanged output
# pragma message "No hardware SPI pins defined. All SPI access will default to bitbanged output"
^
Result: PASS
Sketch uses 213798 bytes (16%) of program storage space. Maximum is 1310720 bytes.
Global variables use 13792 bytes (4%) of dynamic memory, leaving 313888 bytes for local variables. Maximum is 327680 bytes.
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastLED/src/FastLED.h:67:0,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastLED/examples/DemoReel100/DemoReel100.ino:1:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastLED/src/fastspi.h:145:23: note: #pragma message: No hardware SPI pins defined. All SPI access will default to bitbanged output
# pragma message "No hardware SPI pins defined. All SPI access will default to bitbanged output"
^
Result: PASS
Sketch uses 212026 bytes (16%) of program storage space. Maximum is 1310720 bytes.
Global variables use 13664 bytes (4%) of dynamic memory, leaving 314016 bytes for local variables. Maximum is 327680 bytes.
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastLED/src/FastLED.h:67:0,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastLED/examples/Fire2012/Fire2012.ino:1:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastLED/src/fastspi.h:145:23: note: #pragma message: No hardware SPI pins defined. All SPI access will default to bitbanged output
# pragma message "No hardware SPI pins defined. All SPI access will default to bitbanged output"
^
Result: FAIL
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastLED/src/FastLED.h:67:0,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastLED/examples/Fire2012WithPalette/Fire2012WithPalette.ino:1:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastLED/src/fastspi.h:145:23: note: #pragma message: No hardware SPI pins defined. All SPI access will default to bitbanged output
# pragma message "No hardware SPI pins defined. All SPI access will default to bitbanged output"
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastLED/examples/Fire2012WithPalette/Fire2012WithPalette.ino: In function 'void loop()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastLED/examples/Fire2012WithPalette/Fire2012WithPalette.ino:68:32: error: no matching function for call to 'random()'
random16_add_entropy( random());
^
In file included from /tmp/arduino-sketch-9E7C969E4679B7058140CE7816453426/sketch/Fire2012WithPalette.ino.cpp:1:0:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/esp32/hardware/esp32/1.0.6/cores/esp32/Arduino.h:121:6: note: candidate: long int random(long int, long int)
long random(long, long);
^
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/esp32/hardware/esp32/1.0.6/cores/esp32/Arduino.h:121:6: note: candidate expects 2 arguments, 0 provided
In file included from /tmp/arduino-sketch-9E7C969E4679B7058140CE7816453426/sketch/Fire2012WithPalette.ino.cpp:1:0:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/esp32/hardware/esp32/1.0.6/cores/esp32/Arduino.h:179:6: note: candidate: long int random(long int)
long random(long);
^
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/esp32/hardware/esp32/1.0.6/cores/esp32/Arduino.h:179:6: note: candidate expects 1 argument, 0 provided
Result: PASS
Sketch uses 211578 bytes (16%) of program storage space. Maximum is 1310720 bytes.
Global variables use 13728 bytes (4%) of dynamic memory, leaving 313952 bytes for local variables. Maximum is 327680 bytes.
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastLED/src/FastLED.h:67:0,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastLED/examples/FirstLight/FirstLight.ino:6:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastLED/src/fastspi.h:145:23: note: #pragma message: No hardware SPI pins defined. All SPI access will default to bitbanged output
# pragma message "No hardware SPI pins defined. All SPI access will default to bitbanged output"
^
Result: FAIL
Result: PASS
Sketch uses 213806 bytes (16%) of program storage space. Maximum is 1310720 bytes.
Global variables use 14840 bytes (4%) of dynamic memory, leaving 312840 bytes for local variables. Maximum is 327680 bytes.
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastLED/src/FastLED.h:67:0,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastLED/examples/Noise/Noise.ino:1:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastLED/src/fastspi.h:145:23: note: #pragma message: No hardware SPI pins defined. All SPI access will default to bitbanged output
# pragma message "No hardware SPI pins defined. All SPI access will default to bitbanged output"
^
Result: PASS
Sketch uses 233430 bytes (17%) of program storage space. Maximum is 1310720 bytes.
Global variables use 14736 bytes (4%) of dynamic memory, leaving 312944 bytes for local variables. Maximum is 327680 bytes.
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastLED/src/FastLED.h:67:0,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastLED/examples/NoisePlayground/NoisePlayground.ino:1:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastLED/src/fastspi.h:145:23: note: #pragma message: No hardware SPI pins defined. All SPI access will default to bitbanged output
# pragma message "No hardware SPI pins defined. All SPI access will default to bitbanged output"
^
Result: PASS
Sketch uses 216278 bytes (16%) of program storage space. Maximum is 1310720 bytes.
Global variables use 14632 bytes (4%) of dynamic memory, leaving 313048 bytes for local variables. Maximum is 327680 bytes.
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastLED/src/FastLED.h:67:0,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastLED/examples/NoisePlusPalette/NoisePlusPalette.ino:1:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastLED/src/fastspi.h:145:23: note: #pragma message: No hardware SPI pins defined. All SPI access will default to bitbanged output
# pragma message "No hardware SPI pins defined. All SPI access will default to bitbanged output"
^
Result: PASS
Sketch uses 214342 bytes (16%) of program storage space. Maximum is 1310720 bytes.
Global variables use 13904 bytes (4%) of dynamic memory, leaving 313776 bytes for local variables. Maximum is 327680 bytes.
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastLED/src/FastLED.h:67:0,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastLED/examples/Pacifica/Pacifica.ino:9:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastLED/src/fastspi.h:145:23: note: #pragma message: No hardware SPI pins defined. All SPI access will default to bitbanged output
# pragma message "No hardware SPI pins defined. All SPI access will default to bitbanged output"
^
Result: PASS
Sketch uses 206882 bytes (15%) of program storage space. Maximum is 1310720 bytes.
Global variables use 13520 bytes (4%) of dynamic memory, leaving 314160 bytes for local variables. Maximum is 327680 bytes.
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastLED/src/FastLED.h:67:0,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastLED/examples/Pintest/Pintest.ino:2:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastLED/src/fastspi.h:145:23: note: #pragma message: No hardware SPI pins defined. All SPI access will default to bitbanged output
# pragma message "No hardware SPI pins defined. All SPI access will default to bitbanged output"
^
Result: FAIL
Result: PASS
Sketch uses 212558 bytes (16%) of program storage space. Maximum is 1310720 bytes.
Global variables use 14152 bytes (4%) of dynamic memory, leaving 313528 bytes for local variables. Maximum is 327680 bytes.
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastLED/src/FastLED.h:67:0,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastLED/examples/Pride2015/Pride2015.ino:1:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastLED/src/fastspi.h:145:23: note: #pragma message: No hardware SPI pins defined. All SPI access will default to bitbanged output
# pragma message "No hardware SPI pins defined. All SPI access will default to bitbanged output"
^
Result: PASS
Sketch uses 199406 bytes (15%) of program storage space. Maximum is 1310720 bytes.
Global variables use 13228 bytes (4%) of dynamic memory, leaving 314452 bytes for local variables. Maximum is 327680 bytes.
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastLED/src/FastLED.h:67:0,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastLED/examples/RGBCalibrate/RGBCalibrate.ino:1:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastLED/src/fastspi.h:145:23: note: #pragma message: No hardware SPI pins defined. All SPI access will default to bitbanged output
# pragma message "No hardware SPI pins defined. All SPI access will default to bitbanged output"
^
Result: PASS
Sketch uses 212154 bytes (16%) of program storage space. Maximum is 1310720 bytes.
Global variables use 13688 bytes (4%) of dynamic memory, leaving 313992 bytes for local variables. Maximum is 327680 bytes.
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastLED/src/FastLED.h:67:0,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastLED/examples/RGBSetDemo/RGBSetDemo.ino:1:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastLED/src/fastspi.h:145:23: note: #pragma message: No hardware SPI pins defined. All SPI access will default to bitbanged output
# pragma message "No hardware SPI pins defined. All SPI access will default to bitbanged output"
^
Result: FAIL
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastLED/examples/SmartMatrix/SmartMatrix.ino:1:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SmartMatrix/src/SmartMatrix.h:74:19: error: No MatrixHardware*.h file included - You must include one at the top of your sketch
#pragma GCC error "No MatrixHardware*.h file included - You must include one at the top of your sketch"
^
Result: PASS
Sketch uses 214230 bytes (16%) of program storage space. Maximum is 1310720 bytes.
Global variables use 14032 bytes (4%) of dynamic memory, leaving 313648 bytes for local variables. Maximum is 327680 bytes.
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastLED/src/FastLED.h:67:0,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastLED/examples/TwinkleFox/TwinkleFox.ino:1:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastLED/src/fastspi.h:145:23: note: #pragma message: No hardware SPI pins defined. All SPI access will default to bitbanged output
# pragma message "No hardware SPI pins defined. All SPI access will default to bitbanged output"
^
Result: PASS
Sketch uses 212146 bytes (16%) of program storage space. Maximum is 1310720 bytes.
Global variables use 14320 bytes (4%) of dynamic memory, leaving 313360 bytes for local variables. Maximum is 327680 bytes.
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastLED/src/FastLED.h:67:0,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastLED/examples/XYMatrix/XYMatrix.ino:1:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastLED/src/fastspi.h:145:23: note: #pragma message: No hardware SPI pins defined. All SPI access will default to bitbanged output
# pragma message "No hardware SPI pins defined. All SPI access will default to bitbanged output"
^