Firmata - compatibility matrix

This report was generated on Wednesday, 23-Feb-22 22:48:15 CET using arduino-testlib.

Firmata

Version: 2.5.8
More details

Compatibility matrix

Board Claims compatibility Inclusion 
ServoFirmata
 
SimpleAnalogFirmata
 
SimpleDigitalFirmata
 
StandardFirmata
 
StandardFirmataBLE
 
StandardFirmataEthernet
 
AllInputsFirmata
 
EchoString
 
OldStandardFirmata
 
StandardFirmataChipKIT
 
StandardFirmataPlus
 
StandardFirmataWiFi
 
AnalogFirmata
arduino:avr:uno
1.8.4 		Yes PASS PASS PASS PASS PASS FAIL PASS PASS PASS PASS FAIL PASS FAIL PASS
arduino:mbed_nano:nanorp2040connect
2.7.2 		Yes ⚠️ FAIL FAIL FAIL FAIL FAIL FAIL FAIL FAIL FAIL FAIL FAIL FAIL FAIL FAIL
arduino:megaavr:nona4809
1.8.7 		Yes ⚠️ FAIL FAIL FAIL FAIL FAIL FAIL FAIL FAIL FAIL FAIL FAIL FAIL FAIL FAIL
arduino:samd:mkrwifi1010
1.8.12 		Yes ⚠️ FAIL FAIL FAIL FAIL FAIL FAIL FAIL FAIL FAIL FAIL FAIL FAIL FAIL FAIL
esp32:esp32:d1_mini32
1.0.6 		Yes ⚠️ FAIL FAIL FAIL FAIL FAIL FAIL FAIL FAIL FAIL FAIL FAIL FAIL FAIL FAIL

Compilation logs

arduino:avr:uno @ 1.8.4

Inclusion

Result: PASS 

Sketch uses 2044 bytes (6%) of program storage space. Maximum is 32256 bytes.
Global variables use 378 bytes (18%) of dynamic memory, leaving 1670 bytes for local variables. Maximum is 2048 bytes.

examples/AllInputsFirmata

Result: PASS 

Sketch uses 5748 bytes (17%) of program storage space. Maximum is 32256 bytes.
Global variables use 527 bytes (25%) of dynamic memory, leaving 1521 bytes for local variables. Maximum is 2048 bytes.

examples/AnalogFirmata

Result: PASS 

Sketch uses 7172 bytes (22%) of program storage space. Maximum is 32256 bytes.
Global variables use 560 bytes (27%) of dynamic memory, leaving 1488 bytes for local variables. Maximum is 2048 bytes.

examples/EchoString

Result: PASS 

Sketch uses 5006 bytes (15%) of program storage space. Maximum is 32256 bytes.
Global variables use 494 bytes (24%) of dynamic memory, leaving 1554 bytes for local variables. Maximum is 2048 bytes.

examples/OldStandardFirmata

Result: PASS 

Sketch uses 6484 bytes (20%) of program storage space. Maximum is 32256 bytes.
Global variables use 535 bytes (26%) of dynamic memory, leaving 1513 bytes for local variables. Maximum is 2048 bytes.

examples/ServoFirmata

Result: PASS 

Sketch uses 6202 bytes (19%) of program storage space. Maximum is 32256 bytes.
Global variables use 603 bytes (29%) of dynamic memory, leaving 1445 bytes for local variables. Maximum is 2048 bytes.

examples/SimpleAnalogFirmata

Result: PASS 

Sketch uses 5658 bytes (17%) of program storage space. Maximum is 32256 bytes.
Global variables use 521 bytes (25%) of dynamic memory, leaving 1527 bytes for local variables. Maximum is 2048 bytes.

examples/SimpleDigitalFirmata

Result: PASS 

Sketch uses 5588 bytes (17%) of program storage space. Maximum is 32256 bytes.
Global variables use 528 bytes (25%) of dynamic memory, leaving 1520 bytes for local variables. Maximum is 2048 bytes.

examples/StandardFirmata

Result: PASS 

Sketch uses 13156 bytes (40%) of program storage space. Maximum is 32256 bytes.
Global variables use 1109 bytes (54%) of dynamic memory, leaving 939 bytes for local variables. Maximum is 2048 bytes.

examples/StandardFirmataBLE

Result: FAIL 

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Firmata/examples/StandardFirmataBLE/StandardFirmataBLE.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Firmata/examples/StandardFirmataBLE/StandardFirmataBLE.ino:771:3: error: 'stream' was not declared in this scope
   stream.setLocalName(FIRMATA_BLE_LOCAL_NAME);
   ^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Firmata/examples/StandardFirmataBLE/StandardFirmataBLE.ino:771:3: note: suggested alternative: 'Stream'
   stream.setLocalName(FIRMATA_BLE_LOCAL_NAME);
   ^~~~~~
   Stream
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Firmata/examples/StandardFirmataBLE/StandardFirmataBLE.ino: In function 'void loop()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Firmata/examples/StandardFirmataBLE/StandardFirmataBLE.ino:801:8: error: 'stream' was not declared in this scope
   if (!stream.poll()) return;
        ^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Firmata/examples/StandardFirmataBLE/StandardFirmataBLE.ino:801:8: note: suggested alternative: 'Stream'
   if (!stream.poll()) return;
        ^~~~~~
        Stream
Multiple libraries were found for "SoftwareSerial.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/avr/1.8.4/libraries/SoftwareSerial
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Printoo_Library
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Dabble
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EspSoftwareSerial
Multiple libraries were found for "Servo.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Servo
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Printoo_Library
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/evive
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/XMC_Servo
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ServoESP32
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RokitSmart

examples/StandardFirmataChipKIT

Result: FAIL 

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Firmata/examples/StandardFirmataChipKIT/StandardFirmataChipKIT.ino:27:10: fatal error: SoftPWMServo.h: No such file or directory
 #include <SoftPWMServo.h>  // Gives us PWM and Servo on every pin
          ^~~~~~~~~~~~~~~~
compilation terminated.

examples/StandardFirmataEthernet

Result: PASS 

Sketch uses 22536 bytes (69%) of program storage space. Maximum is 32256 bytes.
Global variables use 1396 bytes (68%) of dynamic memory, leaving 652 bytes for local variables. Maximum is 2048 bytes.

examples/StandardFirmataPlus

Result: PASS 

Sketch uses 15814 bytes (49%) of program storage space. Maximum is 32256 bytes.
Global variables use 1286 bytes (62%) of dynamic memory, leaving 762 bytes for local variables. Maximum is 2048 bytes.

examples/StandardFirmataWiFi

Result: FAIL 

In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Firmata/examples/StandardFirmataWiFi/StandardFirmataWiFi.ino:97:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Firmata/examples/StandardFirmataWiFi/wifiConfig.h:194:2: error: #error "you must define a wifi device type in wifiConfig.h."
 #error "you must define a wifi device type in wifiConfig.h."
  ^~~~~
Multiple libraries were found for "Servo.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Servo
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ServoESP32
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/XMC_Servo
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RokitSmart
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Printoo_Library
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/evive
Multiple libraries were found for "SoftwareSerial.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/avr/1.8.4/libraries/SoftwareSerial
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EspSoftwareSerial
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Dabble
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Printoo_Library

arduino:mbed_nano:nanorp2040connect @ 2.7.2

Inclusion

Result: FAIL 

In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Firmata/Firmata.h:17:0,
                 from /tmp/arduino-testlib894260757/test/test.ino:1:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Firmata/Boards.h:856:2: error: #error "Please edit Boards.h with a hardware abstraction for this board"
 #error "Please edit Boards.h with a hardware abstraction for this board"
  ^~~~~

examples/AllInputsFirmata

Result: FAIL 

In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Firmata/Firmata.h:17:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Firmata/examples/AllInputsFirmata/AllInputsFirmata.ino:18:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Firmata/Boards.h:856:2: error: #error "Please edit Boards.h with a hardware abstraction for this board"
 #error "Please edit Boards.h with a hardware abstraction for this board"
  ^~~~~

examples/AnalogFirmata

Result: FAIL 

In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Firmata/Firmata.h:17:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Firmata/examples/AnalogFirmata/AnalogFirmata.ino:18:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Firmata/Boards.h:856:2: error: #error "Please edit Boards.h with a hardware abstraction for this board"
 #error "Please edit Boards.h with a hardware abstraction for this board"
  ^~~~~
Multiple libraries were found for "Servo.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Servo
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ServoESP32
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RokitSmart
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Printoo_Library
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/XMC_Servo
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/evive

examples/EchoString

Result: FAIL 

In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Firmata/Firmata.h:17:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Firmata/examples/EchoString/EchoString.ino:16:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Firmata/Boards.h:856:2: error: #error "Please edit Boards.h with a hardware abstraction for this board"
 #error "Please edit Boards.h with a hardware abstraction for this board"
  ^~~~~

examples/OldStandardFirmata

Result: FAIL 

In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Firmata/examples/OldStandardFirmata/OldStandardFirmata.ino:30:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Hello_Drum/src/EEPROM.h:25:10: fatal error: avr/eeprom.h: No such file or directory
 #include <avr/eeprom.h>
          ^~~~~~~~~~~~~~
compilation terminated.
Multiple libraries were found for "EEPROM.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Hello_Drum
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/arduino-NVM

examples/ServoFirmata

Result: FAIL 

In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Firmata/Firmata.h:17:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Firmata/examples/ServoFirmata/ServoFirmata.ino:19:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Firmata/Boards.h:856:2: error: #error "Please edit Boards.h with a hardware abstraction for this board"
 #error "Please edit Boards.h with a hardware abstraction for this board"
  ^~~~~
Multiple libraries were found for "Servo.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Servo
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RokitSmart
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/evive
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Printoo_Library
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/XMC_Servo
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ServoESP32

examples/SimpleAnalogFirmata

Result: FAIL 

In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Firmata/Firmata.h:17:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Firmata/examples/SimpleAnalogFirmata/SimpleAnalogFirmata.ino:16:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Firmata/Boards.h:856:2: error: #error "Please edit Boards.h with a hardware abstraction for this board"
 #error "Please edit Boards.h with a hardware abstraction for this board"
  ^~~~~

examples/SimpleDigitalFirmata

Result: FAIL 

In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Firmata/Firmata.h:17:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Firmata/examples/SimpleDigitalFirmata/SimpleDigitalFirmata.ino:16:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Firmata/Boards.h:856:2: error: #error "Please edit Boards.h with a hardware abstraction for this board"
 #error "Please edit Boards.h with a hardware abstraction for this board"
  ^~~~~

examples/StandardFirmata

Result: FAIL 

In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Firmata/Firmata.h:17:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Firmata/examples/StandardFirmata/StandardFirmata.ino:28:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Firmata/Boards.h:856:2: error: #error "Please edit Boards.h with a hardware abstraction for this board"
 #error "Please edit Boards.h with a hardware abstraction for this board"
  ^~~~~
Multiple libraries were found for "Servo.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Servo
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RokitSmart
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/evive
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Printoo_Library
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/XMC_Servo
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ServoESP32

examples/StandardFirmataBLE

Result: FAIL 

In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Firmata/Firmata.h:17:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Firmata/examples/StandardFirmataBLE/StandardFirmataBLE.ino:28:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Firmata/Boards.h:856:2: error: #error "Please edit Boards.h with a hardware abstraction for this board"
 #error "Please edit Boards.h with a hardware abstraction for this board"
  ^~~~~
Multiple libraries were found for "Servo.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Servo
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/XMC_Servo
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RokitSmart
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ServoESP32
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/evive
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Printoo_Library

examples/StandardFirmataChipKIT

Result: FAIL 

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Firmata/examples/StandardFirmataChipKIT/StandardFirmataChipKIT.ino:27:10: fatal error: SoftPWMServo.h: No such file or directory
 #include <SoftPWMServo.h>  // Gives us PWM and Servo on every pin
          ^~~~~~~~~~~~~~~~
compilation terminated.

examples/StandardFirmataEthernet

Result: FAIL 

In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Firmata/Firmata.h:17:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Firmata/examples/StandardFirmataEthernet/StandardFirmataEthernet.ino:58:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Firmata/Boards.h:856:2: error: #error "Please edit Boards.h with a hardware abstraction for this board"
 #error "Please edit Boards.h with a hardware abstraction for this board"
  ^~~~~
Multiple libraries were found for "Ethernet.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Ethernet
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EthernetENC
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/UIPEthernet
Multiple libraries were found for "Servo.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Servo
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/evive
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ServoESP32
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RokitSmart
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/XMC_Servo
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Printoo_Library

examples/StandardFirmataPlus

Result: FAIL 

In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Firmata/Firmata.h:17:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Firmata/examples/StandardFirmataPlus/StandardFirmataPlus.ino:49:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Firmata/Boards.h:856:2: error: #error "Please edit Boards.h with a hardware abstraction for this board"
 #error "Please edit Boards.h with a hardware abstraction for this board"
  ^~~~~
Multiple libraries were found for "Servo.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Servo
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RokitSmart
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/evive
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Printoo_Library
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/XMC_Servo
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ServoESP32

examples/StandardFirmataWiFi

Result: FAIL 

In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Firmata/Firmata.h:17:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Firmata/examples/StandardFirmataWiFi/StandardFirmataWiFi.ino:78:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Firmata/Boards.h:856:2: error: #error "Please edit Boards.h with a hardware abstraction for this board"
 #error "Please edit Boards.h with a hardware abstraction for this board"
  ^~~~~
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Firmata/examples/StandardFirmataWiFi/StandardFirmataWiFi.ino:97:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Firmata/examples/StandardFirmataWiFi/wifiConfig.h:194:2: error: #error "you must define a wifi device type in wifiConfig.h."
 #error "you must define a wifi device type in wifiConfig.h."
  ^~~~~
Multiple libraries were found for "Servo.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Servo
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RokitSmart
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/evive
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/XMC_Servo
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Printoo_Library
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ServoESP32

arduino:megaavr:nona4809 @ 1.8.7

Inclusion

Result: FAIL 

In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Firmata/Firmata.h:17:0,
                 from /tmp/arduino-testlib894260757/test/test.ino:1:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Firmata/Boards.h:856:2: error: #error "Please edit Boards.h with a hardware abstraction for this board"
 #error "Please edit Boards.h with a hardware abstraction for this board"
  ^~~~~

examples/AllInputsFirmata

Result: FAIL 

In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Firmata/Firmata.h:17:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Firmata/examples/AllInputsFirmata/AllInputsFirmata.ino:18:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Firmata/Boards.h:856:2: error: #error "Please edit Boards.h with a hardware abstraction for this board"
 #error "Please edit Boards.h with a hardware abstraction for this board"
  ^~~~~

examples/AnalogFirmata

Result: FAIL 

In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Firmata/Firmata.h:17:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Firmata/examples/AnalogFirmata/AnalogFirmata.ino:18:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Firmata/Boards.h:856:2: error: #error "Please edit Boards.h with a hardware abstraction for this board"
 #error "Please edit Boards.h with a hardware abstraction for this board"
  ^~~~~
Multiple libraries were found for "Servo.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Servo
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RokitSmart
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Printoo_Library
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/XMC_Servo
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/evive
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ServoESP32

examples/EchoString

Result: FAIL 

In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Firmata/Firmata.h:17:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Firmata/examples/EchoString/EchoString.ino:16:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Firmata/Boards.h:856:2: error: #error "Please edit Boards.h with a hardware abstraction for this board"
 #error "Please edit Boards.h with a hardware abstraction for this board"
  ^~~~~

examples/OldStandardFirmata

Result: FAIL 

In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Firmata/Firmata.h:17:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Firmata/examples/OldStandardFirmata/OldStandardFirmata.ino:31:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Firmata/Boards.h:856:2: error: #error "Please edit Boards.h with a hardware abstraction for this board"
 #error "Please edit Boards.h with a hardware abstraction for this board"
  ^~~~~
Multiple libraries were found for "EEPROM.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/EEPROM
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Hello_Drum
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/arduino-NVM

examples/ServoFirmata

Result: FAIL 

In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Firmata/Firmata.h:17:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Firmata/examples/ServoFirmata/ServoFirmata.ino:19:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Firmata/Boards.h:856:2: error: #error "Please edit Boards.h with a hardware abstraction for this board"
 #error "Please edit Boards.h with a hardware abstraction for this board"
  ^~~~~
Multiple libraries were found for "Servo.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Servo
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ServoESP32
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/XMC_Servo
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RokitSmart
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/evive
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Printoo_Library

examples/SimpleAnalogFirmata

Result: FAIL 

In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Firmata/Firmata.h:17:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Firmata/examples/SimpleAnalogFirmata/SimpleAnalogFirmata.ino:16:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Firmata/Boards.h:856:2: error: #error "Please edit Boards.h with a hardware abstraction for this board"
 #error "Please edit Boards.h with a hardware abstraction for this board"
  ^~~~~

examples/SimpleDigitalFirmata

Result: FAIL 

In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Firmata/Firmata.h:17:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Firmata/examples/SimpleDigitalFirmata/SimpleDigitalFirmata.ino:16:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Firmata/Boards.h:856:2: error: #error "Please edit Boards.h with a hardware abstraction for this board"
 #error "Please edit Boards.h with a hardware abstraction for this board"
  ^~~~~

examples/StandardFirmata

Result: FAIL 

In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Firmata/Firmata.h:17:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Firmata/examples/StandardFirmata/StandardFirmata.ino:28:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Firmata/Boards.h:856:2: error: #error "Please edit Boards.h with a hardware abstraction for this board"
 #error "Please edit Boards.h with a hardware abstraction for this board"
  ^~~~~
Multiple libraries were found for "Servo.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Servo
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Printoo_Library
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/evive
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RokitSmart
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/XMC_Servo
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ServoESP32

examples/StandardFirmataBLE

Result: FAIL 

In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Firmata/Firmata.h:17:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Firmata/examples/StandardFirmataBLE/StandardFirmataBLE.ino:28:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Firmata/Boards.h:856:2: error: #error "Please edit Boards.h with a hardware abstraction for this board"
 #error "Please edit Boards.h with a hardware abstraction for this board"
  ^~~~~
Multiple libraries were found for "Servo.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Servo
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Printoo_Library
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ServoESP32
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/XMC_Servo
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/evive
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RokitSmart

examples/StandardFirmataChipKIT

Result: FAIL 

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Firmata/examples/StandardFirmataChipKIT/StandardFirmataChipKIT.ino:27:10: fatal error: SoftPWMServo.h: No such file or directory
 #include <SoftPWMServo.h>  // Gives us PWM and Servo on every pin
          ^~~~~~~~~~~~~~~~
compilation terminated.

examples/StandardFirmataEthernet

Result: FAIL 

In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Firmata/Firmata.h:17:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Firmata/examples/StandardFirmataEthernet/StandardFirmataEthernet.ino:58:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Firmata/Boards.h:856:2: error: #error "Please edit Boards.h with a hardware abstraction for this board"
 #error "Please edit Boards.h with a hardware abstraction for this board"
  ^~~~~
Multiple libraries were found for "Ethernet.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Ethernet
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/UIPEthernet
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EthernetENC
Multiple libraries were found for "Servo.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Servo
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RokitSmart
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ServoESP32
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/evive
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Printoo_Library
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/XMC_Servo

examples/StandardFirmataPlus

Result: FAIL 

In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Firmata/Firmata.h:17:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Firmata/examples/StandardFirmataPlus/StandardFirmataPlus.ino:49:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Firmata/Boards.h:856:2: error: #error "Please edit Boards.h with a hardware abstraction for this board"
 #error "Please edit Boards.h with a hardware abstraction for this board"
  ^~~~~
Multiple libraries were found for "Servo.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Servo
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ServoESP32
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/XMC_Servo
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Printoo_Library
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/evive
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RokitSmart

examples/StandardFirmataWiFi

Result: FAIL 

In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Firmata/Firmata.h:17:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Firmata/examples/StandardFirmataWiFi/StandardFirmataWiFi.ino:78:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Firmata/Boards.h:856:2: error: #error "Please edit Boards.h with a hardware abstraction for this board"
 #error "Please edit Boards.h with a hardware abstraction for this board"
  ^~~~~
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Firmata/examples/StandardFirmataWiFi/StandardFirmataWiFi.ino:97:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Firmata/examples/StandardFirmataWiFi/wifiConfig.h:194:2: error: #error "you must define a wifi device type in wifiConfig.h."
 #error "you must define a wifi device type in wifiConfig.h."
  ^~~~~
Multiple libraries were found for "Servo.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Servo
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RokitSmart
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/evive
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Printoo_Library
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ServoESP32
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/XMC_Servo

arduino:samd:mkrwifi1010 @ 1.8.12

Inclusion

Result: FAIL 

In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Firmata/Firmata.h:17:0,
                 from /tmp/arduino-testlib3852188122/test/test.ino:1:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Firmata/Boards.h:856:2: error: #error "Please edit Boards.h with a hardware abstraction for this board"
 #error "Please edit Boards.h with a hardware abstraction for this board"
  ^~~~~

examples/AllInputsFirmata

Result: FAIL 

In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Firmata/Firmata.h:17:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Firmata/examples/AllInputsFirmata/AllInputsFirmata.ino:18:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Firmata/Boards.h:856:2: error: #error "Please edit Boards.h with a hardware abstraction for this board"
 #error "Please edit Boards.h with a hardware abstraction for this board"
  ^~~~~

examples/AnalogFirmata

Result: FAIL 

In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Firmata/Firmata.h:17:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Firmata/examples/AnalogFirmata/AnalogFirmata.ino:18:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Firmata/Boards.h:856:2: error: #error "Please edit Boards.h with a hardware abstraction for this board"
 #error "Please edit Boards.h with a hardware abstraction for this board"
  ^~~~~
Multiple libraries were found for "Servo.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Servo
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/XMC_Servo
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Printoo_Library
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/evive
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ServoESP32
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RokitSmart

examples/EchoString

Result: FAIL 

In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Firmata/Firmata.h:17:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Firmata/examples/EchoString/EchoString.ino:16:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Firmata/Boards.h:856:2: error: #error "Please edit Boards.h with a hardware abstraction for this board"
 #error "Please edit Boards.h with a hardware abstraction for this board"
  ^~~~~

examples/OldStandardFirmata

Result: FAIL 

In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Firmata/examples/OldStandardFirmata/OldStandardFirmata.ino:30:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Hello_Drum/src/EEPROM.h:25:10: fatal error: avr/eeprom.h: No such file or directory
 #include <avr/eeprom.h>
          ^~~~~~~~~~~~~~
compilation terminated.
Multiple libraries were found for "EEPROM.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Hello_Drum
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/arduino-NVM

examples/ServoFirmata

Result: FAIL 

In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Firmata/Firmata.h:17:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Firmata/examples/ServoFirmata/ServoFirmata.ino:19:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Firmata/Boards.h:856:2: error: #error "Please edit Boards.h with a hardware abstraction for this board"
 #error "Please edit Boards.h with a hardware abstraction for this board"
  ^~~~~
Multiple libraries were found for "Servo.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Servo
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/evive
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ServoESP32
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/XMC_Servo
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Printoo_Library
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RokitSmart

examples/SimpleAnalogFirmata

Result: FAIL 

In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Firmata/Firmata.h:17:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Firmata/examples/SimpleAnalogFirmata/SimpleAnalogFirmata.ino:16:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Firmata/Boards.h:856:2: error: #error "Please edit Boards.h with a hardware abstraction for this board"
 #error "Please edit Boards.h with a hardware abstraction for this board"
  ^~~~~

examples/SimpleDigitalFirmata

Result: FAIL 

In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Firmata/Firmata.h:17:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Firmata/examples/SimpleDigitalFirmata/SimpleDigitalFirmata.ino:16:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Firmata/Boards.h:856:2: error: #error "Please edit Boards.h with a hardware abstraction for this board"
 #error "Please edit Boards.h with a hardware abstraction for this board"
  ^~~~~

examples/StandardFirmata

Result: FAIL 

In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Firmata/Firmata.h:17:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Firmata/examples/StandardFirmata/StandardFirmata.ino:28:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Firmata/Boards.h:856:2: error: #error "Please edit Boards.h with a hardware abstraction for this board"
 #error "Please edit Boards.h with a hardware abstraction for this board"
  ^~~~~
Multiple libraries were found for "Servo.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Servo
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/evive
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Printoo_Library
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/XMC_Servo
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RokitSmart
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ServoESP32

examples/StandardFirmataBLE

Result: FAIL 

In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Firmata/Firmata.h:17:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Firmata/examples/StandardFirmataBLE/StandardFirmataBLE.ino:28:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Firmata/Boards.h:856:2: error: #error "Please edit Boards.h with a hardware abstraction for this board"
 #error "Please edit Boards.h with a hardware abstraction for this board"
  ^~~~~
Multiple libraries were found for "Servo.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Servo
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/XMC_Servo
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/evive
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RokitSmart
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Printoo_Library
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ServoESP32

examples/StandardFirmataChipKIT

Result: FAIL 

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Firmata/examples/StandardFirmataChipKIT/StandardFirmataChipKIT.ino:27:10: fatal error: SoftPWMServo.h: No such file or directory
 #include <SoftPWMServo.h>  // Gives us PWM and Servo on every pin
          ^~~~~~~~~~~~~~~~
compilation terminated.

examples/StandardFirmataEthernet

Result: FAIL 

In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Firmata/Firmata.h:17:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Firmata/examples/StandardFirmataEthernet/StandardFirmataEthernet.ino:58:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Firmata/Boards.h:856:2: error: #error "Please edit Boards.h with a hardware abstraction for this board"
 #error "Please edit Boards.h with a hardware abstraction for this board"
  ^~~~~
Multiple libraries were found for "Servo.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Servo
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ServoESP32
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Printoo_Library
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/XMC_Servo
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RokitSmart
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/evive
Multiple libraries were found for "Ethernet.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Ethernet
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/UIPEthernet
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EthernetENC

examples/StandardFirmataPlus

Result: FAIL 

In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Firmata/Firmata.h:17:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Firmata/examples/StandardFirmataPlus/StandardFirmataPlus.ino:49:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Firmata/Boards.h:856:2: error: #error "Please edit Boards.h with a hardware abstraction for this board"
 #error "Please edit Boards.h with a hardware abstraction for this board"
  ^~~~~
Multiple libraries were found for "Servo.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Servo
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Printoo_Library
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/XMC_Servo
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/evive
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RokitSmart
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ServoESP32

examples/StandardFirmataWiFi

Result: FAIL 

In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Firmata/Firmata.h:17:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Firmata/examples/StandardFirmataWiFi/StandardFirmataWiFi.ino:78:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Firmata/Boards.h:856:2: error: #error "Please edit Boards.h with a hardware abstraction for this board"
 #error "Please edit Boards.h with a hardware abstraction for this board"
  ^~~~~
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Firmata/examples/StandardFirmataWiFi/StandardFirmataWiFi.ino:97:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Firmata/examples/StandardFirmataWiFi/wifiConfig.h:194:2: error: #error "you must define a wifi device type in wifiConfig.h."
 #error "you must define a wifi device type in wifiConfig.h."
  ^~~~~
Multiple libraries were found for "Servo.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Servo
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/XMC_Servo
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Printoo_Library
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ServoESP32
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/evive
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RokitSmart

esp32:esp32:d1_mini32 @ 1.0.6

Inclusion

Result: FAIL 

In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Firmata/Firmata.h:17:0,
                 from /tmp/arduino-testlib894260757/test/test.ino:1:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Firmata/Boards.h:856:2: error: #error "Please edit Boards.h with a hardware abstraction for this board"
 #error "Please edit Boards.h with a hardware abstraction for this board"
  ^

examples/AllInputsFirmata

Result: FAIL 

In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Firmata/Firmata.h:17:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Firmata/examples/AllInputsFirmata/AllInputsFirmata.ino:18:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Firmata/Boards.h:856:2: error: #error "Please edit Boards.h with a hardware abstraction for this board"
 #error "Please edit Boards.h with a hardware abstraction for this board"
  ^

examples/AnalogFirmata

Result: FAIL 

In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Firmata/Firmata.h:17:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Firmata/examples/AnalogFirmata/AnalogFirmata.ino:18:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Firmata/Boards.h:856:2: error: #error "Please edit Boards.h with a hardware abstraction for this board"
 #error "Please edit Boards.h with a hardware abstraction for this board"
  ^
Multiple libraries were found for "Servo.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ServoESP32
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/evive
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/XMC_Servo
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RokitSmart
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Servo
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Printoo_Library

examples/EchoString

Result: FAIL 

In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Firmata/Firmata.h:17:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Firmata/examples/EchoString/EchoString.ino:16:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Firmata/Boards.h:856:2: error: #error "Please edit Boards.h with a hardware abstraction for this board"
 #error "Please edit Boards.h with a hardware abstraction for this board"
  ^

examples/OldStandardFirmata

Result: FAIL 

In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Firmata/Firmata.h:17:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Firmata/examples/OldStandardFirmata/OldStandardFirmata.ino:31:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Firmata/Boards.h:856:2: error: #error "Please edit Boards.h with a hardware abstraction for this board"
 #error "Please edit Boards.h with a hardware abstraction for this board"
  ^
Multiple libraries were found for "EEPROM.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/data/packages/esp32/hardware/esp32/1.0.6/libraries/EEPROM
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Hello_Drum
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/arduino-NVM

examples/ServoFirmata

Result: FAIL 

In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Firmata/Firmata.h:17:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Firmata/examples/ServoFirmata/ServoFirmata.ino:19:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Firmata/Boards.h:856:2: error: #error "Please edit Boards.h with a hardware abstraction for this board"
 #error "Please edit Boards.h with a hardware abstraction for this board"
  ^
Multiple libraries were found for "Servo.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ServoESP32
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Printoo_Library
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Servo
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RokitSmart
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/XMC_Servo
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/evive

examples/SimpleAnalogFirmata

Result: FAIL 

In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Firmata/Firmata.h:17:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Firmata/examples/SimpleAnalogFirmata/SimpleAnalogFirmata.ino:16:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Firmata/Boards.h:856:2: error: #error "Please edit Boards.h with a hardware abstraction for this board"
 #error "Please edit Boards.h with a hardware abstraction for this board"
  ^

examples/SimpleDigitalFirmata

Result: FAIL 

In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Firmata/Firmata.h:17:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Firmata/examples/SimpleDigitalFirmata/SimpleDigitalFirmata.ino:16:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Firmata/Boards.h:856:2: error: #error "Please edit Boards.h with a hardware abstraction for this board"
 #error "Please edit Boards.h with a hardware abstraction for this board"
  ^

examples/StandardFirmata

Result: FAIL 

In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Firmata/Firmata.h:17:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Firmata/examples/StandardFirmata/StandardFirmata.ino:28:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Firmata/Boards.h:856:2: error: #error "Please edit Boards.h with a hardware abstraction for this board"
 #error "Please edit Boards.h with a hardware abstraction for this board"
  ^
Multiple libraries were found for "Servo.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ServoESP32
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Printoo_Library
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Servo
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RokitSmart
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/XMC_Servo
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/evive

examples/StandardFirmataBLE

Result: FAIL 

In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Firmata/Firmata.h:17:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Firmata/examples/StandardFirmataBLE/StandardFirmataBLE.ino:28:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Firmata/Boards.h:856:2: error: #error "Please edit Boards.h with a hardware abstraction for this board"
 #error "Please edit Boards.h with a hardware abstraction for this board"
  ^
Multiple libraries were found for "Servo.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ServoESP32
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Servo
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/XMC_Servo
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Printoo_Library
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/evive
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RokitSmart

examples/StandardFirmataChipKIT

Result: FAIL 

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Firmata/examples/StandardFirmataChipKIT/StandardFirmataChipKIT.ino:27:66: fatal error: SoftPWMServo.h: No such file or directory
compilation terminated.

examples/StandardFirmataEthernet

Result: FAIL 

In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Firmata/Firmata.h:17:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Firmata/examples/StandardFirmataEthernet/StandardFirmataEthernet.ino:58:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Firmata/Boards.h:856:2: error: #error "Please edit Boards.h with a hardware abstraction for this board"
 #error "Please edit Boards.h with a hardware abstraction for this board"
  ^
Multiple libraries were found for "Ethernet.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Ethernet
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/UIPEthernet
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EthernetENC
Multiple libraries were found for "Servo.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ServoESP32
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/evive
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/XMC_Servo
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RokitSmart
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Servo
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Printoo_Library

examples/StandardFirmataPlus

Result: FAIL 

In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Firmata/Firmata.h:17:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Firmata/examples/StandardFirmataPlus/StandardFirmataPlus.ino:49:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Firmata/Boards.h:856:2: error: #error "Please edit Boards.h with a hardware abstraction for this board"
 #error "Please edit Boards.h with a hardware abstraction for this board"
  ^
Multiple libraries were found for "Servo.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ServoESP32
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RokitSmart
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/evive
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Servo
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/XMC_Servo
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Printoo_Library

examples/StandardFirmataWiFi

Result: FAIL 

In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Firmata/Firmata.h:17:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Firmata/examples/StandardFirmataWiFi/StandardFirmataWiFi.ino:78:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Firmata/Boards.h:856:2: error: #error "Please edit Boards.h with a hardware abstraction for this board"
 #error "Please edit Boards.h with a hardware abstraction for this board"
  ^
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Firmata/examples/StandardFirmataWiFi/StandardFirmataWiFi.ino:97:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Firmata/examples/StandardFirmataWiFi/wifiConfig.h:194:2: error: #error "you must define a wifi device type in wifiConfig.h."
 #error "you must define a wifi device type in wifiConfig.h."
  ^
Multiple libraries were found for "Servo.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ServoESP32
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/XMC_Servo
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/evive
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Printoo_Library
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Servo
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RokitSmart