FlightSimOutputs - compatibility matrix

This report was generated on Wednesday, 23-Feb-22 22:48:15 CET using arduino-testlib.

FlightSimOutputs

Version: 0.2.6
More details

Compatibility matrix

Board	Claims compatibility	Inclusion	BoardTest	Demo_Cessna172
arduino:avr:uno 1.8.4	Yes	PASS	PASS	FAIL
arduino:mbed_nano:nanorp2040connect 2.7.2	No	FAIL	FAIL	FAIL
arduino:megaavr:nona4809 1.8.7	No ⚠️	PASS	PASS	FAIL
arduino:samd:mkrwifi1010 1.8.12	No	FAIL	FAIL	FAIL
esp32:esp32:d1_mini32 1.0.6	No ⚠️	PASS	PASS	FAIL

Compilation logs

arduino:avr:uno @ 1.8.4

Inclusion

Result: PASS

Sketch uses 1332 bytes (4%) of program storage space. Maximum is 32256 bytes.
Global variables use 184 bytes (8%) of dynamic memory, leaving 1864 bytes for local variables. Maximum is 2048 bytes.

examples/BoardTest

Result: PASS

Sketch uses 4930 bytes (15%) of program storage space. Maximum is 32256 bytes.
Global variables use 589 bytes (28%) of dynamic memory, leaving 1459 bytes for local variables. Maximum is 2048 bytes.

examples/Demo_Cessna172

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FlightSimOutputs/examples/Demo_Cessna172/Demo_Cessna172.ino:25:1: error: 'FlightSimDigitalOutput' does not name a type; did you mean 'FlightSimOutputElement'?
 FlightSimDigitalOutput transponderActive(1);
 ^~~~~~~~~~~~~~~~~~~~~~
 FlightSimOutputElement
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FlightSimOutputs/examples/Demo_Cessna172/Demo_Cessna172.ino:30:1: error: 'FlightSimDigitalOutput' does not name a type; did you mean 'FlightSimOutputElement'?
 FlightSimDigitalOutput transponderActiveHighThreshold(2, 0.5);
 ^~~~~~~~~~~~~~~~~~~~~~
 FlightSimOutputElement
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FlightSimOutputs/examples/Demo_Cessna172/Demo_Cessna172.ino:35:1: error: 'FlightSimDigitalOutput' does not name a type; did you mean 'FlightSimOutputElement'?
 FlightSimDigitalOutput transponderActiveInverted(3, 0.3, true);
 ^~~~~~~~~~~~~~~~~~~~~~
 FlightSimOutputElement
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FlightSimOutputs/examples/Demo_Cessna172/Demo_Cessna172.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FlightSimOutputs/examples/Demo_Cessna172/Demo_Cessna172.ino:42:3: error: 'FlightSim' was not declared in this scope
   FlightSim.update();  // Call FlightSim.update to make serial output work. Must not take longer
   ^~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FlightSimOutputs/examples/Demo_Cessna172/Demo_Cessna172.ino:53:3: error: 'transponderActive' was not declared in this scope
   transponderActive=             XPlaneRef("sim/cockpit2/radios/indicators/transponder_brightness");
   ^~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FlightSimOutputs/examples/Demo_Cessna172/Demo_Cessna172.ino:53:34: error: 'XPlaneRef' was not declared in this scope
   transponderActive=             XPlaneRef("sim/cockpit2/radios/indicators/transponder_brightness");
                                  ^~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FlightSimOutputs/examples/Demo_Cessna172/Demo_Cessna172.ino:54:3: error: 'transponderActiveHighThreshold' was not declared in this scope
   transponderActiveHighThreshold=XPlaneRef("sim/cockpit2/radios/indicators/transponder_brightness");
   ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FlightSimOutputs/examples/Demo_Cessna172/Demo_Cessna172.ino:55:3: error: 'transponderActiveInverted' was not declared in this scope
   transponderActiveInverted=     XPlaneRef("sim/cockpit2/radios/indicators/transponder_brightness");
   ^~~~~~~~~~~~~~~~~~~~~~~~~

arduino:mbed_nano:nanorp2040connect @ 2.7.2

Inclusion

Result: FAIL

WARNING: library FlightSimOutputs claims to run on avr architecture(s) and may be incompatible with your current board which runs on mbed_nano architecture(s).
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FlightSimOutputs/src/FlightSimOutputs.cpp: In member function 'void MultiOutputBoard::setData(size_t, bool)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FlightSimOutputs/src/FlightSimOutputs.cpp:140:20: error: '_BV' was not declared in this scope
  uint8_t bitMask = _BV(pinNumber & 7);
                    ^~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FlightSimOutputs/src/FlightSimOutputs.cpp:140:20: note: suggested alternative: '_B'
  uint8_t bitMask = _BV(pinNumber & 7);
                    ^~~
                    _B
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FlightSimOutputs/src/FlightSimOutputs.cpp: In member function 'bool MultiOutputBoard::getData(size_t)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FlightSimOutputs/src/FlightSimOutputs.cpp:170:20: error: '_BV' was not declared in this scope
  uint8_t bitMask = _BV(pinNumber & 7);
                    ^~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FlightSimOutputs/src/FlightSimOutputs.cpp:170:20: note: suggested alternative: '_B'
  uint8_t bitMask = _BV(pinNumber & 7);
                    ^~~
                    _B

examples/BoardTest

Result: FAIL

WARNING: library FlightSimOutputs claims to run on avr architecture(s) and may be incompatible with your current board which runs on mbed_nano architecture(s).
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FlightSimOutputs/src/FlightSimOutputs.cpp: In member function 'void MultiOutputBoard::setData(size_t, bool)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FlightSimOutputs/src/FlightSimOutputs.cpp:140:20: error: '_BV' was not declared in this scope
  uint8_t bitMask = _BV(pinNumber & 7);
                    ^~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FlightSimOutputs/src/FlightSimOutputs.cpp:140:20: note: suggested alternative: '_B'
  uint8_t bitMask = _BV(pinNumber & 7);
                    ^~~
                    _B
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FlightSimOutputs/src/FlightSimOutputs.cpp: In member function 'bool MultiOutputBoard::getData(size_t)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FlightSimOutputs/src/FlightSimOutputs.cpp:170:20: error: '_BV' was not declared in this scope
  uint8_t bitMask = _BV(pinNumber & 7);
                    ^~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FlightSimOutputs/src/FlightSimOutputs.cpp:170:20: note: suggested alternative: '_B'
  uint8_t bitMask = _BV(pinNumber & 7);
                    ^~~
                    _B

examples/Demo_Cessna172

Result: FAIL

WARNING: library FlightSimOutputs claims to run on avr architecture(s) and may be incompatible with your current board which runs on mbed_nano architecture(s).
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FlightSimOutputs/examples/Demo_Cessna172/Demo_Cessna172.ino:25:1: error: 'FlightSimDigitalOutput' does not name a type; did you mean 'FlightSimOutputElement'?
 FlightSimDigitalOutput transponderActive(1);
 ^~~~~~~~~~~~~~~~~~~~~~
 FlightSimOutputElement
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FlightSimOutputs/examples/Demo_Cessna172/Demo_Cessna172.ino:30:1: error: 'FlightSimDigitalOutput' does not name a type; did you mean 'FlightSimOutputElement'?
 FlightSimDigitalOutput transponderActiveHighThreshold(2, 0.5);
 ^~~~~~~~~~~~~~~~~~~~~~
 FlightSimOutputElement
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FlightSimOutputs/examples/Demo_Cessna172/Demo_Cessna172.ino:35:1: error: 'FlightSimDigitalOutput' does not name a type; did you mean 'FlightSimOutputElement'?
 FlightSimDigitalOutput transponderActiveInverted(3, 0.3, true);
 ^~~~~~~~~~~~~~~~~~~~~~
 FlightSimOutputElement
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FlightSimOutputs/examples/Demo_Cessna172/Demo_Cessna172.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FlightSimOutputs/examples/Demo_Cessna172/Demo_Cessna172.ino:42:3: error: 'FlightSim' was not declared in this scope
   FlightSim.update();  // Call FlightSim.update to make serial output work. Must not take longer
   ^~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FlightSimOutputs/examples/Demo_Cessna172/Demo_Cessna172.ino:53:3: error: 'transponderActive' was not declared in this scope
   transponderActive=             XPlaneRef("sim/cockpit2/radios/indicators/transponder_brightness");
   ^~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FlightSimOutputs/examples/Demo_Cessna172/Demo_Cessna172.ino:53:34: error: 'XPlaneRef' was not declared in this scope
   transponderActive=             XPlaneRef("sim/cockpit2/radios/indicators/transponder_brightness");
                                  ^~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FlightSimOutputs/examples/Demo_Cessna172/Demo_Cessna172.ino:54:3: error: 'transponderActiveHighThreshold' was not declared in this scope
   transponderActiveHighThreshold=XPlaneRef("sim/cockpit2/radios/indicators/transponder_brightness");
   ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FlightSimOutputs/examples/Demo_Cessna172/Demo_Cessna172.ino:55:3: error: 'transponderActiveInverted' was not declared in this scope
   transponderActiveInverted=     XPlaneRef("sim/cockpit2/radios/indicators/transponder_brightness");
   ^~~~~~~~~~~~~~~~~~~~~~~~~

arduino:megaavr:nona4809 @ 1.8.7

Inclusion

Result: PASS

WARNING: library FlightSimOutputs claims to run on avr architecture(s) and may be incompatible with your current board which runs on megaavr architecture(s).
Sketch uses 2614 bytes (5%) of program storage space. Maximum is 49152 bytes.
Global variables use 177 bytes (2%) of dynamic memory, leaving 5967 bytes for local variables. Maximum is 6144 bytes.

examples/BoardTest

Result: PASS

WARNING: library FlightSimOutputs claims to run on avr architecture(s) and may be incompatible with your current board which runs on megaavr architecture(s).
Sketch uses 5909 bytes (12%) of program storage space. Maximum is 49152 bytes.
Global variables use 238 bytes (3%) of dynamic memory, leaving 5906 bytes for local variables. Maximum is 6144 bytes.

examples/Demo_Cessna172

Result: FAIL

WARNING: library FlightSimOutputs claims to run on avr architecture(s) and may be incompatible with your current board which runs on megaavr architecture(s).
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FlightSimOutputs/examples/Demo_Cessna172/Demo_Cessna172.ino:25:1: error: 'FlightSimDigitalOutput' does not name a type; did you mean 'FlightSimOutputElement'?
 FlightSimDigitalOutput transponderActive(1);
 ^~~~~~~~~~~~~~~~~~~~~~
 FlightSimOutputElement
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FlightSimOutputs/examples/Demo_Cessna172/Demo_Cessna172.ino:30:1: error: 'FlightSimDigitalOutput' does not name a type; did you mean 'FlightSimOutputElement'?
 FlightSimDigitalOutput transponderActiveHighThreshold(2, 0.5);
 ^~~~~~~~~~~~~~~~~~~~~~
 FlightSimOutputElement
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FlightSimOutputs/examples/Demo_Cessna172/Demo_Cessna172.ino:35:1: error: 'FlightSimDigitalOutput' does not name a type; did you mean 'FlightSimOutputElement'?
 FlightSimDigitalOutput transponderActiveInverted(3, 0.3, true);
 ^~~~~~~~~~~~~~~~~~~~~~
 FlightSimOutputElement
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FlightSimOutputs/examples/Demo_Cessna172/Demo_Cessna172.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FlightSimOutputs/examples/Demo_Cessna172/Demo_Cessna172.ino:42:3: error: 'FlightSim' was not declared in this scope
   FlightSim.update();  // Call FlightSim.update to make serial output work. Must not take longer
   ^~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FlightSimOutputs/examples/Demo_Cessna172/Demo_Cessna172.ino:53:3: error: 'transponderActive' was not declared in this scope
   transponderActive=             XPlaneRef("sim/cockpit2/radios/indicators/transponder_brightness");
   ^~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FlightSimOutputs/examples/Demo_Cessna172/Demo_Cessna172.ino:53:3: note: suggested alternative: 'isDoubleBondedActive'
   transponderActive=             XPlaneRef("sim/cockpit2/radios/indicators/transponder_brightness");
   ^~~~~~~~~~~~~~~~~
   isDoubleBondedActive
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FlightSimOutputs/examples/Demo_Cessna172/Demo_Cessna172.ino:53:34: error: 'XPlaneRef' was not declared in this scope
   transponderActive=             XPlaneRef("sim/cockpit2/radios/indicators/transponder_brightness");
                                  ^~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FlightSimOutputs/examples/Demo_Cessna172/Demo_Cessna172.ino:54:3: error: 'transponderActiveHighThreshold' was not declared in this scope
   transponderActiveHighThreshold=XPlaneRef("sim/cockpit2/radios/indicators/transponder_brightness");
   ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FlightSimOutputs/examples/Demo_Cessna172/Demo_Cessna172.ino:55:3: error: 'transponderActiveInverted' was not declared in this scope
   transponderActiveInverted=     XPlaneRef("sim/cockpit2/radios/indicators/transponder_brightness");
   ^~~~~~~~~~~~~~~~~~~~~~~~~

arduino:samd:mkrwifi1010 @ 1.8.12

Inclusion

Result: FAIL

WARNING: library FlightSimOutputs claims to run on avr architecture(s) and may be incompatible with your current board which runs on samd architecture(s).
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FlightSimOutputs/src/FlightSimOutputs.cpp: In member function 'void MultiOutputBoard::setData(size_t, bool)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FlightSimOutputs/src/FlightSimOutputs.cpp:140:20: error: '_BV' was not declared in this scope
  uint8_t bitMask = _BV(pinNumber & 7);
                    ^~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FlightSimOutputs/src/FlightSimOutputs.cpp:140:20: note: suggested alternative: '_B'
  uint8_t bitMask = _BV(pinNumber & 7);
                    ^~~
                    _B
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FlightSimOutputs/src/FlightSimOutputs.cpp: In member function 'bool MultiOutputBoard::getData(size_t)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FlightSimOutputs/src/FlightSimOutputs.cpp:170:20: error: '_BV' was not declared in this scope
  uint8_t bitMask = _BV(pinNumber & 7);
                    ^~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FlightSimOutputs/src/FlightSimOutputs.cpp:170:20: note: suggested alternative: '_B'
  uint8_t bitMask = _BV(pinNumber & 7);
                    ^~~
                    _B

examples/BoardTest

Result: FAIL

WARNING: library FlightSimOutputs claims to run on avr architecture(s) and may be incompatible with your current board which runs on samd architecture(s).
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FlightSimOutputs/src/FlightSimOutputs.cpp: In member function 'void MultiOutputBoard::setData(size_t, bool)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FlightSimOutputs/src/FlightSimOutputs.cpp:140:20: error: '_BV' was not declared in this scope
  uint8_t bitMask = _BV(pinNumber & 7);
                    ^~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FlightSimOutputs/src/FlightSimOutputs.cpp:140:20: note: suggested alternative: '_B'
  uint8_t bitMask = _BV(pinNumber & 7);
                    ^~~
                    _B
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FlightSimOutputs/src/FlightSimOutputs.cpp: In member function 'bool MultiOutputBoard::getData(size_t)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FlightSimOutputs/src/FlightSimOutputs.cpp:170:20: error: '_BV' was not declared in this scope
  uint8_t bitMask = _BV(pinNumber & 7);
                    ^~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FlightSimOutputs/src/FlightSimOutputs.cpp:170:20: note: suggested alternative: '_B'
  uint8_t bitMask = _BV(pinNumber & 7);
                    ^~~
                    _B

examples/Demo_Cessna172

Result: FAIL

WARNING: library FlightSimOutputs claims to run on avr architecture(s) and may be incompatible with your current board which runs on samd architecture(s).
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FlightSimOutputs/examples/Demo_Cessna172/Demo_Cessna172.ino:25:1: error: 'FlightSimDigitalOutput' does not name a type; did you mean 'FlightSimOutputElement'?
 FlightSimDigitalOutput transponderActive(1);
 ^~~~~~~~~~~~~~~~~~~~~~
 FlightSimOutputElement
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FlightSimOutputs/examples/Demo_Cessna172/Demo_Cessna172.ino:30:1: error: 'FlightSimDigitalOutput' does not name a type; did you mean 'FlightSimOutputElement'?
 FlightSimDigitalOutput transponderActiveHighThreshold(2, 0.5);
 ^~~~~~~~~~~~~~~~~~~~~~
 FlightSimOutputElement
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FlightSimOutputs/examples/Demo_Cessna172/Demo_Cessna172.ino:35:1: error: 'FlightSimDigitalOutput' does not name a type; did you mean 'FlightSimOutputElement'?
 FlightSimDigitalOutput transponderActiveInverted(3, 0.3, true);
 ^~~~~~~~~~~~~~~~~~~~~~
 FlightSimOutputElement
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FlightSimOutputs/examples/Demo_Cessna172/Demo_Cessna172.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FlightSimOutputs/examples/Demo_Cessna172/Demo_Cessna172.ino:42:3: error: 'FlightSim' was not declared in this scope
   FlightSim.update();  // Call FlightSim.update to make serial output work. Must not take longer
   ^~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FlightSimOutputs/examples/Demo_Cessna172/Demo_Cessna172.ino:53:3: error: 'transponderActive' was not declared in this scope
   transponderActive=             XPlaneRef("sim/cockpit2/radios/indicators/transponder_brightness");
   ^~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FlightSimOutputs/examples/Demo_Cessna172/Demo_Cessna172.ino:53:34: error: 'XPlaneRef' was not declared in this scope
   transponderActive=             XPlaneRef("sim/cockpit2/radios/indicators/transponder_brightness");
                                  ^~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FlightSimOutputs/examples/Demo_Cessna172/Demo_Cessna172.ino:54:3: error: 'transponderActiveHighThreshold' was not declared in this scope
   transponderActiveHighThreshold=XPlaneRef("sim/cockpit2/radios/indicators/transponder_brightness");
   ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FlightSimOutputs/examples/Demo_Cessna172/Demo_Cessna172.ino:55:3: error: 'transponderActiveInverted' was not declared in this scope
   transponderActiveInverted=     XPlaneRef("sim/cockpit2/radios/indicators/transponder_brightness");
   ^~~~~~~~~~~~~~~~~~~~~~~~~

esp32:esp32:d1_mini32 @ 1.0.6

Inclusion

Result: PASS

WARNING: library FlightSimOutputs claims to run on avr architecture(s) and may be incompatible with your current board which runs on esp32 architecture(s).
Sketch uses 200510 bytes (15%) of program storage space. Maximum is 1310720 bytes.
Global variables use 13192 bytes (4%) of dynamic memory, leaving 314488 bytes for local variables. Maximum is 327680 bytes.

examples/BoardTest

Result: PASS

WARNING: library FlightSimOutputs claims to run on avr architecture(s) and may be incompatible with your current board which runs on esp32 architecture(s).
Sketch uses 203102 bytes (15%) of program storage space. Maximum is 1310720 bytes.
Global variables use 13416 bytes (4%) of dynamic memory, leaving 314264 bytes for local variables. Maximum is 327680 bytes.

examples/Demo_Cessna172

Result: FAIL

WARNING: library FlightSimOutputs claims to run on avr architecture(s) and may be incompatible with your current board which runs on esp32 architecture(s).
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FlightSimOutputs/examples/Demo_Cessna172/Demo_Cessna172.ino:25:1: error: 'FlightSimDigitalOutput' does not name a type
 FlightSimDigitalOutput transponderActive(1);
 ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FlightSimOutputs/examples/Demo_Cessna172/Demo_Cessna172.ino:30:1: error: 'FlightSimDigitalOutput' does not name a type
 FlightSimDigitalOutput transponderActiveHighThreshold(2, 0.5);
 ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FlightSimOutputs/examples/Demo_Cessna172/Demo_Cessna172.ino:35:1: error: 'FlightSimDigitalOutput' does not name a type
 FlightSimDigitalOutput transponderActiveInverted(3, 0.3, true);
 ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FlightSimOutputs/examples/Demo_Cessna172/Demo_Cessna172.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FlightSimOutputs/examples/Demo_Cessna172/Demo_Cessna172.ino:42:3: error: 'FlightSim' was not declared in this scope
   FlightSim.update();  // Call FlightSim.update to make serial output work. Must not take longer
   ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FlightSimOutputs/examples/Demo_Cessna172/Demo_Cessna172.ino:53:3: error: 'transponderActive' was not declared in this scope
   transponderActive=             XPlaneRef("sim/cockpit2/radios/indicators/transponder_brightness");
   ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FlightSimOutputs/examples/Demo_Cessna172/Demo_Cessna172.ino:53:99: error: 'XPlaneRef' was not declared in this scope
   transponderActive=             XPlaneRef("sim/cockpit2/radios/indicators/transponder_brightness");
                                                                                                   ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FlightSimOutputs/examples/Demo_Cessna172/Demo_Cessna172.ino:54:3: error: 'transponderActiveHighThreshold' was not declared in this scope
   transponderActiveHighThreshold=XPlaneRef("sim/cockpit2/radios/indicators/transponder_brightness");
   ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FlightSimOutputs/examples/Demo_Cessna172/Demo_Cessna172.ino:55:3: error: 'transponderActiveInverted' was not declared in this scope
   transponderActiveInverted=     XPlaneRef("sim/cockpit2/radios/indicators/transponder_brightness");
   ^