FreqCount - compatibility matrix

This report was generated on Wednesday, 23-Feb-22 22:48:15 CET using arduino-testlib.

FreqCount

Version: 1.3
More details

Compatibility matrix

Board Claims compatibility Inclusion 
LCD_Output
 
Serial_Output
arduino:avr:uno
1.8.4 		Yes PASS PASS PASS
arduino:mbed_nano:nanorp2040connect
2.7.2 		Yes ⚠️ FAIL FAIL FAIL
arduino:megaavr:nona4809
1.8.7 		Yes ⚠️ FAIL FAIL FAIL
arduino:samd:mkrwifi1010
1.8.12 		Yes ⚠️ FAIL FAIL FAIL
esp32:esp32:d1_mini32
1.0.6 		Yes ⚠️ FAIL FAIL FAIL

Compilation logs

arduino:avr:uno @ 1.8.4

Inclusion

Result: PASS 

Sketch uses 650 bytes (2%) of program storage space. Maximum is 32256 bytes.
Global variables use 22 bytes (1%) of dynamic memory, leaving 2026 bytes for local variables. Maximum is 2048 bytes.

examples/LCD_Output

Result: PASS 

Sketch uses 3136 bytes (9%) of program storage space. Maximum is 32256 bytes.
Global variables use 250 bytes (12%) of dynamic memory, leaving 1798 bytes for local variables. Maximum is 2048 bytes.

examples/Serial_Output

Result: PASS 

Sketch uses 2060 bytes (6%) of program storage space. Maximum is 32256 bytes.
Global variables use 204 bytes (9%) of dynamic memory, leaving 1844 bytes for local variables. Maximum is 2048 bytes.

arduino:mbed_nano:nanorp2040connect @ 2.7.2

Inclusion

Result: FAIL 

In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FreqCount/FreqCount.cpp:27:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FreqCount/util/FreqCountTimers.h:64:4: error: #error "Unknown chip, please edit me with timer+counter definitions"
   #error "Unknown chip, please edit me with timer+counter definitions"
    ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FreqCount/FreqCount.cpp: In static member function 'static void FreqCountClass::begin(uint16_t)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FreqCount/FreqCount.cpp:44:2: error: 'counter_init' was not declared in this scope
  counter_init();
  ^~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FreqCount/FreqCount.cpp:44:2: note: suggested alternative: 'count_ready'
  counter_init();
  ^~~~~~~~~~~~
  count_ready
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FreqCount/FreqCount.cpp:45:16: error: 'timer_init' was not declared in this scope
  gate_length = timer_init(msec);
                ^~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FreqCount/FreqCount.cpp:45:16: note: suggested alternative: 'timer_hw_t'
  gate_length = timer_init(msec);
                ^~~~~~~~~~
                timer_hw_t
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FreqCount/FreqCount.cpp:46:19: error: 'SREG' was not declared in this scope
  uint8_t status = SREG;
                   ^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FreqCount/FreqCount.cpp:46:19: note: suggested alternative: 'SING'
  uint8_t status = SREG;
                   ^~~~
                   SING
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FreqCount/FreqCount.cpp:47:2: error: 'cli' was not declared in this scope
  cli();
  ^~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FreqCount/FreqCount.cpp:48:2: error: 'timer_start' was not declared in this scope
  timer_start();
  ^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FreqCount/FreqCount.cpp:48:2: note: suggested alternative: 'timer_hw_t'
  timer_start();
  ^~~~~~~~~~~
  timer_hw_t
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FreqCount/FreqCount.cpp:50:2: error: 'counter_start' was not declared in this scope
  counter_start();
  ^~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FreqCount/FreqCount.cpp:50:2: note: suggested alternative: 'count_ready'
  counter_start();
  ^~~~~~~~~~~~~
  count_ready
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FreqCount/FreqCount.cpp: In static member function 'static uint32_t FreqCountClass::read()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FreqCount/FreqCount.cpp:64:11: error: 'SREG' was not declared in this scope
  status = SREG;
           ^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FreqCount/FreqCount.cpp:64:11: note: suggested alternative: 'SING'
  status = SREG;
           ^~~~
           SING
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FreqCount/FreqCount.cpp:65:2: error: 'cli' was not declared in this scope
  cli();
  ^~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FreqCount/FreqCount.cpp: In static member function 'static void FreqCountClass::end()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FreqCount/FreqCount.cpp:74:2: error: 'timer_shutdown' was not declared in this scope
  timer_shutdown();
  ^~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FreqCount/FreqCount.cpp:74:2: note: suggested alternative: 'timer_hw'
  timer_shutdown();
  ^~~~~~~~~~~~~~
  timer_hw
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FreqCount/FreqCount.cpp:75:2: error: 'counter_shutdown' was not declared in this scope
  counter_shutdown();
  ^~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FreqCount/FreqCount.cpp:75:2: note: suggested alternative: 'count_output'
  counter_shutdown();
  ^~~~~~~~~~~~~~~~
  count_output
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FreqCount/FreqCount.cpp: At global scope:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FreqCount/FreqCount.cpp:79:4: error: expected constructor, destructor, or type conversion before '(' token
 ISR(TIMER_ISR_VECTOR)
    ^

examples/LCD_Output

Result: FAIL 

In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FreqCount/FreqCount.cpp:27:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FreqCount/util/FreqCountTimers.h:64:4: error: #error "Unknown chip, please edit me with timer+counter definitions"
   #error "Unknown chip, please edit me with timer+counter definitions"
    ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FreqCount/FreqCount.cpp: In static member function 'static void FreqCountClass::begin(uint16_t)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FreqCount/FreqCount.cpp:44:2: error: 'counter_init' was not declared in this scope
  counter_init();
  ^~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FreqCount/FreqCount.cpp:44:2: note: suggested alternative: 'count_ready'
  counter_init();
  ^~~~~~~~~~~~
  count_ready
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FreqCount/FreqCount.cpp:45:16: error: 'timer_init' was not declared in this scope
  gate_length = timer_init(msec);
                ^~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FreqCount/FreqCount.cpp:45:16: note: suggested alternative: 'timer_hw_t'
  gate_length = timer_init(msec);
                ^~~~~~~~~~
                timer_hw_t
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FreqCount/FreqCount.cpp:46:19: error: 'SREG' was not declared in this scope
  uint8_t status = SREG;
                   ^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FreqCount/FreqCount.cpp:46:19: note: suggested alternative: 'SING'
  uint8_t status = SREG;
                   ^~~~
                   SING
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FreqCount/FreqCount.cpp:47:2: error: 'cli' was not declared in this scope
  cli();
  ^~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FreqCount/FreqCount.cpp:48:2: error: 'timer_start' was not declared in this scope
  timer_start();
  ^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FreqCount/FreqCount.cpp:48:2: note: suggested alternative: 'timer_hw_t'
  timer_start();
  ^~~~~~~~~~~
  timer_hw_t
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FreqCount/FreqCount.cpp:50:2: error: 'counter_start' was not declared in this scope
  counter_start();
  ^~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FreqCount/FreqCount.cpp:50:2: note: suggested alternative: 'count_ready'
  counter_start();
  ^~~~~~~~~~~~~
  count_ready
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FreqCount/FreqCount.cpp: In static member function 'static uint32_t FreqCountClass::read()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FreqCount/FreqCount.cpp:64:11: error: 'SREG' was not declared in this scope
  status = SREG;
           ^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FreqCount/FreqCount.cpp:64:11: note: suggested alternative: 'SING'
  status = SREG;
           ^~~~
           SING
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FreqCount/FreqCount.cpp:65:2: error: 'cli' was not declared in this scope
  cli();
  ^~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FreqCount/FreqCount.cpp: In static member function 'static void FreqCountClass::end()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FreqCount/FreqCount.cpp:74:2: error: 'timer_shutdown' was not declared in this scope
  timer_shutdown();
  ^~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FreqCount/FreqCount.cpp:74:2: note: suggested alternative: 'timer_hw'
  timer_shutdown();
  ^~~~~~~~~~~~~~
  timer_hw
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FreqCount/FreqCount.cpp:75:2: error: 'counter_shutdown' was not declared in this scope
  counter_shutdown();
  ^~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FreqCount/FreqCount.cpp:75:2: note: suggested alternative: 'count_output'
  counter_shutdown();
  ^~~~~~~~~~~~~~~~
  count_output
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FreqCount/FreqCount.cpp: At global scope:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FreqCount/FreqCount.cpp:79:4: error: expected constructor, destructor, or type conversion before '(' token
 ISR(TIMER_ISR_VECTOR)
    ^

examples/Serial_Output

Result: FAIL 

In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FreqCount/FreqCount.cpp:27:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FreqCount/util/FreqCountTimers.h:64:4: error: #error "Unknown chip, please edit me with timer+counter definitions"
   #error "Unknown chip, please edit me with timer+counter definitions"
    ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FreqCount/FreqCount.cpp: In static member function 'static void FreqCountClass::begin(uint16_t)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FreqCount/FreqCount.cpp:44:2: error: 'counter_init' was not declared in this scope
  counter_init();
  ^~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FreqCount/FreqCount.cpp:44:2: note: suggested alternative: 'count_ready'
  counter_init();
  ^~~~~~~~~~~~
  count_ready
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FreqCount/FreqCount.cpp:45:16: error: 'timer_init' was not declared in this scope
  gate_length = timer_init(msec);
                ^~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FreqCount/FreqCount.cpp:45:16: note: suggested alternative: 'timer_hw_t'
  gate_length = timer_init(msec);
                ^~~~~~~~~~
                timer_hw_t
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FreqCount/FreqCount.cpp:46:19: error: 'SREG' was not declared in this scope
  uint8_t status = SREG;
                   ^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FreqCount/FreqCount.cpp:46:19: note: suggested alternative: 'SING'
  uint8_t status = SREG;
                   ^~~~
                   SING
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FreqCount/FreqCount.cpp:47:2: error: 'cli' was not declared in this scope
  cli();
  ^~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FreqCount/FreqCount.cpp:48:2: error: 'timer_start' was not declared in this scope
  timer_start();
  ^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FreqCount/FreqCount.cpp:48:2: note: suggested alternative: 'timer_hw_t'
  timer_start();
  ^~~~~~~~~~~
  timer_hw_t
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FreqCount/FreqCount.cpp:50:2: error: 'counter_start' was not declared in this scope
  counter_start();
  ^~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FreqCount/FreqCount.cpp:50:2: note: suggested alternative: 'count_ready'
  counter_start();
  ^~~~~~~~~~~~~
  count_ready
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FreqCount/FreqCount.cpp: In static member function 'static uint32_t FreqCountClass::read()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FreqCount/FreqCount.cpp:64:11: error: 'SREG' was not declared in this scope
  status = SREG;
           ^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FreqCount/FreqCount.cpp:64:11: note: suggested alternative: 'SING'
  status = SREG;
           ^~~~
           SING
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FreqCount/FreqCount.cpp:65:2: error: 'cli' was not declared in this scope
  cli();
  ^~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FreqCount/FreqCount.cpp: In static member function 'static void FreqCountClass::end()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FreqCount/FreqCount.cpp:74:2: error: 'timer_shutdown' was not declared in this scope
  timer_shutdown();
  ^~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FreqCount/FreqCount.cpp:74:2: note: suggested alternative: 'timer_hw'
  timer_shutdown();
  ^~~~~~~~~~~~~~
  timer_hw
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FreqCount/FreqCount.cpp:75:2: error: 'counter_shutdown' was not declared in this scope
  counter_shutdown();
  ^~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FreqCount/FreqCount.cpp:75:2: note: suggested alternative: 'count_output'
  counter_shutdown();
  ^~~~~~~~~~~~~~~~
  count_output
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FreqCount/FreqCount.cpp: At global scope:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FreqCount/FreqCount.cpp:79:4: error: expected constructor, destructor, or type conversion before '(' token
 ISR(TIMER_ISR_VECTOR)
    ^

arduino:megaavr:nona4809 @ 1.8.7

Inclusion

Result: FAIL 

In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FreqCount/FreqCount.cpp:27:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FreqCount/util/FreqCountTimers.h:64:4: error: #error "Unknown chip, please edit me with timer+counter definitions"
   #error "Unknown chip, please edit me with timer+counter definitions"
    ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FreqCount/FreqCount.cpp: In static member function 'static void FreqCountClass::begin(uint16_t)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FreqCount/FreqCount.cpp:44:2: error: 'counter_init' was not declared in this scope
  counter_init();
  ^~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FreqCount/FreqCount.cpp:44:2: note: suggested alternative: 'count_ready'
  counter_init();
  ^~~~~~~~~~~~
  count_ready
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FreqCount/FreqCount.cpp:45:16: error: 'timer_init' was not declared in this scope
  gate_length = timer_init(msec);
                ^~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FreqCount/FreqCount.cpp:45:16: note: suggested alternative: 'isprint'
  gate_length = timer_init(msec);
                ^~~~~~~~~~
                isprint
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FreqCount/FreqCount.cpp:48:2: error: 'timer_start' was not declared in this scope
  timer_start();
  ^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FreqCount/FreqCount.cpp:48:2: note: suggested alternative: 'va_start'
  timer_start();
  ^~~~~~~~~~~
  va_start
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FreqCount/FreqCount.cpp:50:2: error: 'counter_start' was not declared in this scope
  counter_start();
  ^~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FreqCount/FreqCount.cpp:50:2: note: suggested alternative: 'count_ready'
  counter_start();
  ^~~~~~~~~~~~~
  count_ready
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FreqCount/FreqCount.cpp: In static member function 'static void FreqCountClass::end()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FreqCount/FreqCount.cpp:74:2: error: 'timer_shutdown' was not declared in this scope
  timer_shutdown();
  ^~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FreqCount/FreqCount.cpp:75:2: error: 'counter_shutdown' was not declared in this scope
  counter_shutdown();
  ^~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FreqCount/FreqCount.cpp:75:2: note: suggested alternative: 'count_output'
  counter_shutdown();
  ^~~~~~~~~~~~~~~~
  count_output
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FreqCount/FreqCount.cpp: In function 'void TIMER_ISR_VECTOR()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FreqCount/FreqCount.cpp:85:14: error: 'counter_read' was not declared in this scope
  count_lsw = counter_read();
              ^~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FreqCount/FreqCount.cpp:85:14: note: suggested alternative: 'count_ready'
  count_lsw = counter_read();
              ^~~~~~~~~~~~
              count_ready
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FreqCount/FreqCount.cpp:86:6: error: 'counter_overflow' was not declared in this scope
  if (counter_overflow()) {
      ^~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FreqCount/FreqCount.cpp:86:6: note: suggested alternative: 'count_lsw'
  if (counter_overflow()) {
      ^~~~~~~~~~~~~~~~
      count_lsw
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FreqCount/FreqCount.cpp:87:3: error: 'counter_overflow_reset' was not declared in this scope
   counter_overflow_reset();
   ^~~~~~~~~~~~~~~~~~~~~~

examples/LCD_Output

Result: FAIL 

In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FreqCount/FreqCount.cpp:27:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FreqCount/util/FreqCountTimers.h:64:4: error: #error "Unknown chip, please edit me with timer+counter definitions"
   #error "Unknown chip, please edit me with timer+counter definitions"
    ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FreqCount/FreqCount.cpp: In static member function 'static void FreqCountClass::begin(uint16_t)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FreqCount/FreqCount.cpp:44:2: error: 'counter_init' was not declared in this scope
  counter_init();
  ^~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FreqCount/FreqCount.cpp:44:2: note: suggested alternative: 'count_ready'
  counter_init();
  ^~~~~~~~~~~~
  count_ready
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FreqCount/FreqCount.cpp:45:16: error: 'timer_init' was not declared in this scope
  gate_length = timer_init(msec);
                ^~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FreqCount/FreqCount.cpp:45:16: note: suggested alternative: 'isprint'
  gate_length = timer_init(msec);
                ^~~~~~~~~~
                isprint
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FreqCount/FreqCount.cpp:48:2: error: 'timer_start' was not declared in this scope
  timer_start();
  ^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FreqCount/FreqCount.cpp:48:2: note: suggested alternative: 'va_start'
  timer_start();
  ^~~~~~~~~~~
  va_start
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FreqCount/FreqCount.cpp:50:2: error: 'counter_start' was not declared in this scope
  counter_start();
  ^~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FreqCount/FreqCount.cpp:50:2: note: suggested alternative: 'count_ready'
  counter_start();
  ^~~~~~~~~~~~~
  count_ready
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FreqCount/FreqCount.cpp: In static member function 'static void FreqCountClass::end()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FreqCount/FreqCount.cpp:74:2: error: 'timer_shutdown' was not declared in this scope
  timer_shutdown();
  ^~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FreqCount/FreqCount.cpp:75:2: error: 'counter_shutdown' was not declared in this scope
  counter_shutdown();
  ^~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FreqCount/FreqCount.cpp:75:2: note: suggested alternative: 'count_output'
  counter_shutdown();
  ^~~~~~~~~~~~~~~~
  count_output
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FreqCount/FreqCount.cpp: In function 'void TIMER_ISR_VECTOR()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FreqCount/FreqCount.cpp:85:14: error: 'counter_read' was not declared in this scope
  count_lsw = counter_read();
              ^~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FreqCount/FreqCount.cpp:85:14: note: suggested alternative: 'count_ready'
  count_lsw = counter_read();
              ^~~~~~~~~~~~
              count_ready
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FreqCount/FreqCount.cpp:86:6: error: 'counter_overflow' was not declared in this scope
  if (counter_overflow()) {
      ^~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FreqCount/FreqCount.cpp:86:6: note: suggested alternative: 'count_lsw'
  if (counter_overflow()) {
      ^~~~~~~~~~~~~~~~
      count_lsw
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FreqCount/FreqCount.cpp:87:3: error: 'counter_overflow_reset' was not declared in this scope
   counter_overflow_reset();
   ^~~~~~~~~~~~~~~~~~~~~~

examples/Serial_Output

Result: FAIL 

In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FreqCount/FreqCount.cpp:27:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FreqCount/util/FreqCountTimers.h:64:4: error: #error "Unknown chip, please edit me with timer+counter definitions"
   #error "Unknown chip, please edit me with timer+counter definitions"
    ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FreqCount/FreqCount.cpp: In static member function 'static void FreqCountClass::begin(uint16_t)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FreqCount/FreqCount.cpp:44:2: error: 'counter_init' was not declared in this scope
  counter_init();
  ^~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FreqCount/FreqCount.cpp:44:2: note: suggested alternative: 'count_ready'
  counter_init();
  ^~~~~~~~~~~~
  count_ready
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FreqCount/FreqCount.cpp:45:16: error: 'timer_init' was not declared in this scope
  gate_length = timer_init(msec);
                ^~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FreqCount/FreqCount.cpp:45:16: note: suggested alternative: 'isprint'
  gate_length = timer_init(msec);
                ^~~~~~~~~~
                isprint
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FreqCount/FreqCount.cpp:48:2: error: 'timer_start' was not declared in this scope
  timer_start();
  ^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FreqCount/FreqCount.cpp:48:2: note: suggested alternative: 'va_start'
  timer_start();
  ^~~~~~~~~~~
  va_start
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FreqCount/FreqCount.cpp:50:2: error: 'counter_start' was not declared in this scope
  counter_start();
  ^~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FreqCount/FreqCount.cpp:50:2: note: suggested alternative: 'count_ready'
  counter_start();
  ^~~~~~~~~~~~~
  count_ready
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FreqCount/FreqCount.cpp: In static member function 'static void FreqCountClass::end()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FreqCount/FreqCount.cpp:74:2: error: 'timer_shutdown' was not declared in this scope
  timer_shutdown();
  ^~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FreqCount/FreqCount.cpp:75:2: error: 'counter_shutdown' was not declared in this scope
  counter_shutdown();
  ^~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FreqCount/FreqCount.cpp:75:2: note: suggested alternative: 'count_output'
  counter_shutdown();
  ^~~~~~~~~~~~~~~~
  count_output
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FreqCount/FreqCount.cpp: In function 'void TIMER_ISR_VECTOR()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FreqCount/FreqCount.cpp:85:14: error: 'counter_read' was not declared in this scope
  count_lsw = counter_read();
              ^~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FreqCount/FreqCount.cpp:85:14: note: suggested alternative: 'count_ready'
  count_lsw = counter_read();
              ^~~~~~~~~~~~
              count_ready
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FreqCount/FreqCount.cpp:86:6: error: 'counter_overflow' was not declared in this scope
  if (counter_overflow()) {
      ^~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FreqCount/FreqCount.cpp:86:6: note: suggested alternative: 'count_lsw'
  if (counter_overflow()) {
      ^~~~~~~~~~~~~~~~
      count_lsw
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FreqCount/FreqCount.cpp:87:3: error: 'counter_overflow_reset' was not declared in this scope
   counter_overflow_reset();
   ^~~~~~~~~~~~~~~~~~~~~~

arduino:samd:mkrwifi1010 @ 1.8.12

Inclusion

Result: FAIL 

In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FreqCount/FreqCount.cpp:27:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FreqCount/util/FreqCountTimers.h:64:4: error: #error "Unknown chip, please edit me with timer+counter definitions"
   #error "Unknown chip, please edit me with timer+counter definitions"
    ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FreqCount/FreqCount.cpp: In static member function 'static void FreqCountClass::begin(uint16_t)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FreqCount/FreqCount.cpp:44:2: error: 'counter_init' was not declared in this scope
  counter_init();
  ^~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FreqCount/FreqCount.cpp:44:2: note: suggested alternative: 'count_ready'
  counter_init();
  ^~~~~~~~~~~~
  count_ready
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FreqCount/FreqCount.cpp:45:16: error: 'timer_init' was not declared in this scope
  gate_length = timer_init(msec);
                ^~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FreqCount/FreqCount.cpp:45:16: note: suggested alternative: 'timer_t'
  gate_length = timer_init(msec);
                ^~~~~~~~~~
                timer_t
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FreqCount/FreqCount.cpp:46:19: error: 'SREG' was not declared in this scope
  uint8_t status = SREG;
                   ^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FreqCount/FreqCount.cpp:46:19: note: suggested alternative: 'SING'
  uint8_t status = SREG;
                   ^~~~
                   SING
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FreqCount/FreqCount.cpp:47:2: error: 'cli' was not declared in this scope
  cli();
  ^~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FreqCount/FreqCount.cpp:47:2: note: suggested alternative: 'Gclk'
  cli();
  ^~~
  Gclk
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FreqCount/FreqCount.cpp:48:2: error: 'timer_start' was not declared in this scope
  timer_start();
  ^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FreqCount/FreqCount.cpp:48:2: note: suggested alternative: 'timer_t'
  timer_start();
  ^~~~~~~~~~~
  timer_t
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FreqCount/FreqCount.cpp:50:2: error: 'counter_start' was not declared in this scope
  counter_start();
  ^~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FreqCount/FreqCount.cpp:50:2: note: suggested alternative: 'count_ready'
  counter_start();
  ^~~~~~~~~~~~~
  count_ready
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FreqCount/FreqCount.cpp: In static member function 'static uint32_t FreqCountClass::read()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FreqCount/FreqCount.cpp:64:11: error: 'SREG' was not declared in this scope
  status = SREG;
           ^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FreqCount/FreqCount.cpp:64:11: note: suggested alternative: 'SING'
  status = SREG;
           ^~~~
           SING
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FreqCount/FreqCount.cpp:65:2: error: 'cli' was not declared in this scope
  cli();
  ^~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FreqCount/FreqCount.cpp:65:2: note: suggested alternative: 'Gclk'
  cli();
  ^~~
  Gclk
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FreqCount/FreqCount.cpp: In static member function 'static void FreqCountClass::end()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FreqCount/FreqCount.cpp:74:2: error: 'timer_shutdown' was not declared in this scope
  timer_shutdown();
  ^~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FreqCount/FreqCount.cpp:74:2: note: suggested alternative: 'timer_t'
  timer_shutdown();
  ^~~~~~~~~~~~~~
  timer_t
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FreqCount/FreqCount.cpp:75:2: error: 'counter_shutdown' was not declared in this scope
  counter_shutdown();
  ^~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FreqCount/FreqCount.cpp:75:2: note: suggested alternative: 'count_output'
  counter_shutdown();
  ^~~~~~~~~~~~~~~~
  count_output
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FreqCount/FreqCount.cpp: At global scope:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FreqCount/FreqCount.cpp:79:4: error: expected constructor, destructor, or type conversion before '(' token
 ISR(TIMER_ISR_VECTOR)
    ^

examples/LCD_Output

Result: FAIL 

In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FreqCount/FreqCount.cpp:27:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FreqCount/util/FreqCountTimers.h:64:4: error: #error "Unknown chip, please edit me with timer+counter definitions"
   #error "Unknown chip, please edit me with timer+counter definitions"
    ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FreqCount/FreqCount.cpp: In static member function 'static void FreqCountClass::begin(uint16_t)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FreqCount/FreqCount.cpp:44:2: error: 'counter_init' was not declared in this scope
  counter_init();
  ^~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FreqCount/FreqCount.cpp:44:2: note: suggested alternative: 'count_ready'
  counter_init();
  ^~~~~~~~~~~~
  count_ready
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FreqCount/FreqCount.cpp:45:16: error: 'timer_init' was not declared in this scope
  gate_length = timer_init(msec);
                ^~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FreqCount/FreqCount.cpp:45:16: note: suggested alternative: 'timer_t'
  gate_length = timer_init(msec);
                ^~~~~~~~~~
                timer_t
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FreqCount/FreqCount.cpp:46:19: error: 'SREG' was not declared in this scope
  uint8_t status = SREG;
                   ^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FreqCount/FreqCount.cpp:46:19: note: suggested alternative: 'SING'
  uint8_t status = SREG;
                   ^~~~
                   SING
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FreqCount/FreqCount.cpp:47:2: error: 'cli' was not declared in this scope
  cli();
  ^~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FreqCount/FreqCount.cpp:47:2: note: suggested alternative: 'Gclk'
  cli();
  ^~~
  Gclk
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FreqCount/FreqCount.cpp:48:2: error: 'timer_start' was not declared in this scope
  timer_start();
  ^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FreqCount/FreqCount.cpp:48:2: note: suggested alternative: 'timer_t'
  timer_start();
  ^~~~~~~~~~~
  timer_t
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FreqCount/FreqCount.cpp:50:2: error: 'counter_start' was not declared in this scope
  counter_start();
  ^~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FreqCount/FreqCount.cpp:50:2: note: suggested alternative: 'count_ready'
  counter_start();
  ^~~~~~~~~~~~~
  count_ready
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FreqCount/FreqCount.cpp: In static member function 'static uint32_t FreqCountClass::read()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FreqCount/FreqCount.cpp:64:11: error: 'SREG' was not declared in this scope
  status = SREG;
           ^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FreqCount/FreqCount.cpp:64:11: note: suggested alternative: 'SING'
  status = SREG;
           ^~~~
           SING
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FreqCount/FreqCount.cpp:65:2: error: 'cli' was not declared in this scope
  cli();
  ^~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FreqCount/FreqCount.cpp:65:2: note: suggested alternative: 'Gclk'
  cli();
  ^~~
  Gclk
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FreqCount/FreqCount.cpp: In static member function 'static void FreqCountClass::end()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FreqCount/FreqCount.cpp:74:2: error: 'timer_shutdown' was not declared in this scope
  timer_shutdown();
  ^~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FreqCount/FreqCount.cpp:74:2: note: suggested alternative: 'timer_t'
  timer_shutdown();
  ^~~~~~~~~~~~~~
  timer_t
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FreqCount/FreqCount.cpp:75:2: error: 'counter_shutdown' was not declared in this scope
  counter_shutdown();
  ^~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FreqCount/FreqCount.cpp:75:2: note: suggested alternative: 'count_output'
  counter_shutdown();
  ^~~~~~~~~~~~~~~~
  count_output
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FreqCount/FreqCount.cpp: At global scope:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FreqCount/FreqCount.cpp:79:4: error: expected constructor, destructor, or type conversion before '(' token
 ISR(TIMER_ISR_VECTOR)
    ^

examples/Serial_Output

Result: FAIL 

In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FreqCount/FreqCount.cpp:27:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FreqCount/util/FreqCountTimers.h:64:4: error: #error "Unknown chip, please edit me with timer+counter definitions"
   #error "Unknown chip, please edit me with timer+counter definitions"
    ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FreqCount/FreqCount.cpp: In static member function 'static void FreqCountClass::begin(uint16_t)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FreqCount/FreqCount.cpp:44:2: error: 'counter_init' was not declared in this scope
  counter_init();
  ^~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FreqCount/FreqCount.cpp:44:2: note: suggested alternative: 'count_ready'
  counter_init();
  ^~~~~~~~~~~~
  count_ready
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FreqCount/FreqCount.cpp:45:16: error: 'timer_init' was not declared in this scope
  gate_length = timer_init(msec);
                ^~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FreqCount/FreqCount.cpp:45:16: note: suggested alternative: 'timer_t'
  gate_length = timer_init(msec);
                ^~~~~~~~~~
                timer_t
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FreqCount/FreqCount.cpp:46:19: error: 'SREG' was not declared in this scope
  uint8_t status = SREG;
                   ^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FreqCount/FreqCount.cpp:46:19: note: suggested alternative: 'SING'
  uint8_t status = SREG;
                   ^~~~
                   SING
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FreqCount/FreqCount.cpp:47:2: error: 'cli' was not declared in this scope
  cli();
  ^~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FreqCount/FreqCount.cpp:47:2: note: suggested alternative: 'Gclk'
  cli();
  ^~~
  Gclk
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FreqCount/FreqCount.cpp:48:2: error: 'timer_start' was not declared in this scope
  timer_start();
  ^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FreqCount/FreqCount.cpp:48:2: note: suggested alternative: 'timer_t'
  timer_start();
  ^~~~~~~~~~~
  timer_t
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FreqCount/FreqCount.cpp:50:2: error: 'counter_start' was not declared in this scope
  counter_start();
  ^~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FreqCount/FreqCount.cpp:50:2: note: suggested alternative: 'count_ready'
  counter_start();
  ^~~~~~~~~~~~~
  count_ready
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FreqCount/FreqCount.cpp: In static member function 'static uint32_t FreqCountClass::read()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FreqCount/FreqCount.cpp:64:11: error: 'SREG' was not declared in this scope
  status = SREG;
           ^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FreqCount/FreqCount.cpp:64:11: note: suggested alternative: 'SING'
  status = SREG;
           ^~~~
           SING
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FreqCount/FreqCount.cpp:65:2: error: 'cli' was not declared in this scope
  cli();
  ^~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FreqCount/FreqCount.cpp:65:2: note: suggested alternative: 'Gclk'
  cli();
  ^~~
  Gclk
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FreqCount/FreqCount.cpp: In static member function 'static void FreqCountClass::end()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FreqCount/FreqCount.cpp:74:2: error: 'timer_shutdown' was not declared in this scope
  timer_shutdown();
  ^~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FreqCount/FreqCount.cpp:74:2: note: suggested alternative: 'timer_t'
  timer_shutdown();
  ^~~~~~~~~~~~~~
  timer_t
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FreqCount/FreqCount.cpp:75:2: error: 'counter_shutdown' was not declared in this scope
  counter_shutdown();
  ^~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FreqCount/FreqCount.cpp:75:2: note: suggested alternative: 'count_output'
  counter_shutdown();
  ^~~~~~~~~~~~~~~~
  count_output
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FreqCount/FreqCount.cpp: At global scope:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FreqCount/FreqCount.cpp:79:4: error: expected constructor, destructor, or type conversion before '(' token
 ISR(TIMER_ISR_VECTOR)
    ^

esp32:esp32:d1_mini32 @ 1.0.6

Inclusion

Result: FAIL 

In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FreqCount/FreqCount.cpp:27:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FreqCount/util/FreqCountTimers.h:64:4: error: #error "Unknown chip, please edit me with timer+counter definitions"
   #error "Unknown chip, please edit me with timer+counter definitions"
    ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FreqCount/FreqCount.cpp: In static member function 'static void FreqCountClass::begin(uint16_t)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FreqCount/FreqCount.cpp:44:15: error: 'counter_init' was not declared in this scope
  counter_init();
               ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FreqCount/FreqCount.cpp:45:31: error: 'timer_init' was not declared in this scope
  gate_length = timer_init(msec);
                               ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FreqCount/FreqCount.cpp:46:19: error: 'SREG' was not declared in this scope
  uint8_t status = SREG;
                   ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FreqCount/FreqCount.cpp:48:14: error: 'timer_start' was not declared in this scope
  timer_start();
              ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FreqCount/FreqCount.cpp:50:16: error: 'counter_start' was not declared in this scope
  counter_start();
                ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FreqCount/FreqCount.cpp: In static member function 'static uint32_t FreqCountClass::read()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FreqCount/FreqCount.cpp:64:11: error: 'SREG' was not declared in this scope
  status = SREG;
           ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FreqCount/FreqCount.cpp: In static member function 'static void FreqCountClass::end()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FreqCount/FreqCount.cpp:74:17: error: 'timer_shutdown' was not declared in this scope
  timer_shutdown();
                 ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FreqCount/FreqCount.cpp:75:19: error: 'counter_shutdown' was not declared in this scope
  counter_shutdown();
                   ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FreqCount/FreqCount.cpp: At global scope:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FreqCount/FreqCount.cpp:79:4: error: expected constructor, destructor, or type conversion before '(' token
 ISR(TIMER_ISR_VECTOR)
    ^

examples/LCD_Output

Result: FAIL 

In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FreqCount/FreqCount.cpp:27:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FreqCount/util/FreqCountTimers.h:64:4: error: #error "Unknown chip, please edit me with timer+counter definitions"
   #error "Unknown chip, please edit me with timer+counter definitions"
    ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FreqCount/FreqCount.cpp: In static member function 'static void FreqCountClass::begin(uint16_t)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FreqCount/FreqCount.cpp:44:15: error: 'counter_init' was not declared in this scope
  counter_init();
               ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FreqCount/FreqCount.cpp:45:31: error: 'timer_init' was not declared in this scope
  gate_length = timer_init(msec);
                               ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FreqCount/FreqCount.cpp:46:19: error: 'SREG' was not declared in this scope
  uint8_t status = SREG;
                   ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FreqCount/FreqCount.cpp:48:14: error: 'timer_start' was not declared in this scope
  timer_start();
              ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FreqCount/FreqCount.cpp:50:16: error: 'counter_start' was not declared in this scope
  counter_start();
                ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FreqCount/FreqCount.cpp: In static member function 'static uint32_t FreqCountClass::read()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FreqCount/FreqCount.cpp:64:11: error: 'SREG' was not declared in this scope
  status = SREG;
           ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FreqCount/FreqCount.cpp: In static member function 'static void FreqCountClass::end()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FreqCount/FreqCount.cpp:74:17: error: 'timer_shutdown' was not declared in this scope
  timer_shutdown();
                 ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FreqCount/FreqCount.cpp:75:19: error: 'counter_shutdown' was not declared in this scope
  counter_shutdown();
                   ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FreqCount/FreqCount.cpp: At global scope:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FreqCount/FreqCount.cpp:79:4: error: expected constructor, destructor, or type conversion before '(' token
 ISR(TIMER_ISR_VECTOR)
    ^

examples/Serial_Output

Result: FAIL 

In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FreqCount/FreqCount.cpp:27:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FreqCount/util/FreqCountTimers.h:64:4: error: #error "Unknown chip, please edit me with timer+counter definitions"
   #error "Unknown chip, please edit me with timer+counter definitions"
    ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FreqCount/FreqCount.cpp: In static member function 'static void FreqCountClass::begin(uint16_t)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FreqCount/FreqCount.cpp:44:15: error: 'counter_init' was not declared in this scope
  counter_init();
               ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FreqCount/FreqCount.cpp:45:31: error: 'timer_init' was not declared in this scope
  gate_length = timer_init(msec);
                               ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FreqCount/FreqCount.cpp:46:19: error: 'SREG' was not declared in this scope
  uint8_t status = SREG;
                   ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FreqCount/FreqCount.cpp:48:14: error: 'timer_start' was not declared in this scope
  timer_start();
              ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FreqCount/FreqCount.cpp:50:16: error: 'counter_start' was not declared in this scope
  counter_start();
                ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FreqCount/FreqCount.cpp: In static member function 'static uint32_t FreqCountClass::read()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FreqCount/FreqCount.cpp:64:11: error: 'SREG' was not declared in this scope
  status = SREG;
           ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FreqCount/FreqCount.cpp: In static member function 'static void FreqCountClass::end()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FreqCount/FreqCount.cpp:74:17: error: 'timer_shutdown' was not declared in this scope
  timer_shutdown();
                 ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FreqCount/FreqCount.cpp:75:19: error: 'counter_shutdown' was not declared in this scope
  counter_shutdown();
                   ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FreqCount/FreqCount.cpp: At global scope:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FreqCount/FreqCount.cpp:79:4: error: expected constructor, destructor, or type conversion before '(' token
 ISR(TIMER_ISR_VECTOR)
    ^