G4Enc - compatibility matrix

This report was generated on Wednesday, 23-Feb-22 22:48:15 CET using arduino-testlib.

G4Enc

Version: 1.0.0
More details

Compatibility matrix

g4_encode_simple

Compilation logs

arduino:avr:uno @ 1.8.4

Inclusion

Result: PASS

Sketch uses 444 bytes (1%) of program storage space. Maximum is 32256 bytes.
Global variables use 9 bytes (0%) of dynamic memory, leaving 2039 bytes for local variables. Maximum is 2048 bytes.

examples/g4_encode_simple

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/G4Enc/examples/g4_encode_simple/g4_encode_simple.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/G4Enc/examples/g4_encode_simple/g4_encode_simple.ino:56:10: error: 'class HardwareSerial' has no member named 'printf'; did you mean 'print'?
   Serial.printf("%d x %d image compressed to %d bytes of G4 data in %d ms\n", WIDTH, HEIGHT, iSize, (int)lTime);
          ^~~~~~
          print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/G4Enc/examples/g4_encode_simple/g4_encode_simple.ino:57:10: error: 'class HardwareSerial' has no member named 'printf'; did you mean 'print'?
   Serial.printf("Compression ratio = %d:1\n", (256*128)/(8*iSize));
          ^~~~~~
          print

arduino:mbed_nano:nanorp2040connect @ 2.7.2

Inclusion

Result: PASS

Sketch uses 78756 bytes (0%) of program storage space. Maximum is 16777216 bytes.
Global variables use 43444 bytes (16%) of dynamic memory, leaving 226892 bytes for local variables. Maximum is 270336 bytes.

examples/g4_encode_simple

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/G4Enc/examples/g4_encode_simple/g4_encode_simple.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/G4Enc/examples/g4_encode_simple/g4_encode_simple.ino:56:10: error: 'class arduino::UART' has no member named 'printf'; did you mean 'print'?
   Serial.printf("%d x %d image compressed to %d bytes of G4 data in %d ms\n", WIDTH, HEIGHT, iSize, (int)lTime);
          ^~~~~~
          print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/G4Enc/examples/g4_encode_simple/g4_encode_simple.ino:57:10: error: 'class arduino::UART' has no member named 'printf'; did you mean 'print'?
   Serial.printf("Compression ratio = %d:1\n", (256*128)/(8*iSize));
          ^~~~~~
          print

arduino:megaavr:nona4809 @ 1.8.7

Inclusion

Result: PASS

Sketch uses 802 bytes (1%) of program storage space. Maximum is 49152 bytes.
Global variables use 22 bytes (0%) of dynamic memory, leaving 6122 bytes for local variables. Maximum is 6144 bytes.

examples/g4_encode_simple

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/G4Enc/examples/g4_encode_simple/g4_encode_simple.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/G4Enc/examples/g4_encode_simple/g4_encode_simple.ino:56:10: error: 'class UartClass' has no member named 'printf'; did you mean 'print'?
   Serial.printf("%d x %d image compressed to %d bytes of G4 data in %d ms\n", WIDTH, HEIGHT, iSize, (int)lTime);
          ^~~~~~
          print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/G4Enc/examples/g4_encode_simple/g4_encode_simple.ino:57:10: error: 'class UartClass' has no member named 'printf'; did you mean 'print'?
   Serial.printf("Compression ratio = %d:1\n", (256*128)/(8*iSize));
          ^~~~~~
          print

arduino:samd:mkrwifi1010 @ 1.8.12

Inclusion

Result: PASS

Sketch uses 12156 bytes (4%) of program storage space. Maximum is 262144 bytes.
Global variables use 2996 bytes (9%) of dynamic memory, leaving 29772 bytes for local variables. Maximum is 32768 bytes.

examples/g4_encode_simple

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/G4Enc/examples/g4_encode_simple/g4_encode_simple.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/G4Enc/examples/g4_encode_simple/g4_encode_simple.ino:56:10: error: 'class Serial_' has no member named 'printf'; did you mean 'print'?
   Serial.printf("%d x %d image compressed to %d bytes of G4 data in %d ms\n", WIDTH, HEIGHT, iSize, (int)lTime);
          ^~~~~~
          print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/G4Enc/examples/g4_encode_simple/g4_encode_simple.ino:57:10: error: 'class Serial_' has no member named 'printf'; did you mean 'print'?
   Serial.printf("Compression ratio = %d:1\n", (256*128)/(8*iSize));
          ^~~~~~
          print

esp32:esp32:d1_mini32 @ 1.0.6

Inclusion

Result: PASS

Sketch uses 197832 bytes (15%) of program storage space. Maximum is 1310720 bytes.
Global variables use 13092 bytes (3%) of dynamic memory, leaving 314588 bytes for local variables. Maximum is 327680 bytes.

examples/g4_encode_simple

Result: PASS

Sketch uses 230022 bytes (17%) of program storage space. Maximum is 1310720 bytes.
Global variables use 25768 bytes (7%) of dynamic memory, leaving 301912 bytes for local variables. Maximum is 327680 bytes.