GSMSim - compatibility matrix

This report was generated on Wednesday, 23-Feb-22 22:48:15 CET using arduino-testlib.

GSMSim

Version: 2.0.2
More details

Compatibility matrix

GSMSim_Email

GSMSim_HTTP

GSMSim_Module_Info

GSMSim_SMS

GSMSim_Time

GSMSim_Call

GSMSim_DTMF

Compilation logs

arduino:avr:uno @ 1.8.4

Inclusion

Result: PASS

Sketch uses 444 bytes (1%) of program storage space. Maximum is 32256 bytes.
Global variables use 9 bytes (0%) of dynamic memory, leaving 2039 bytes for local variables. Maximum is 2048 bytes.

examples/GSMSim_Call

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GSMSim/examples/GSMSim_Call/GSMSim_Call.ino:54:17: error: 'Serial1' was not declared in this scope
 GSMSimCall call(Serial1, RESET_PIN); // GSMSimCall inherit from GSMSim. You can use GSMSim methods with it.
                 ^~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GSMSim/examples/GSMSim_Call/GSMSim_Call.ino:54:17: note: suggested alternative: 'Serial'
 GSMSimCall call(Serial1, RESET_PIN); // GSMSimCall inherit from GSMSim. You can use GSMSim methods with it.
                 ^~~~~~~
                 Serial
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GSMSim/examples/GSMSim_Call/GSMSim_Call.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GSMSim/examples/GSMSim_Call/GSMSim_Call.ino:57:2: error: 'Serial1' was not declared in this scope
  Serial1.begin(115200); // If you dont change module baudrate, it comes with auto baudrate.
  ^~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GSMSim/examples/GSMSim_Call/GSMSim_Call.ino:57:2: note: suggested alternative: 'Serial'
  Serial1.begin(115200); // If you dont change module baudrate, it comes with auto baudrate.
  ^~~~~~~
  Serial
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GSMSim/examples/GSMSim_Call/GSMSim_Call.ino: In function 'void loop()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GSMSim/examples/GSMSim_Call/GSMSim_Call.ino:99:5: error: 'Serial1' was not declared in this scope
  if(Serial1.available()) {
     ^~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GSMSim/examples/GSMSim_Call/GSMSim_Call.ino:99:5: note: suggested alternative: 'Serial'
  if(Serial1.available()) {
     ^~~~~~~
     Serial

examples/GSMSim_DTMF

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GSMSim/examples/GSMSim_DTMF/GSMSim_DTMF.ino:60:17: error: 'Serial1' was not declared in this scope
 GSMSimDTMF call(Serial1, RESET_PIN); // GSMSimDTMF inherit from GSMSimCall. You can use GSMSim and GSMSimCall methods with it.
                 ^~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GSMSim/examples/GSMSim_DTMF/GSMSim_DTMF.ino:60:17: note: suggested alternative: 'Serial'
 GSMSimDTMF call(Serial1, RESET_PIN); // GSMSimDTMF inherit from GSMSimCall. You can use GSMSim and GSMSimCall methods with it.
                 ^~~~~~~
                 Serial
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GSMSim/examples/GSMSim_DTMF/GSMSim_DTMF.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GSMSim/examples/GSMSim_DTMF/GSMSim_DTMF.ino:63:3: error: 'Serial1' was not declared in this scope
   Serial1.begin(115200); // If you dont change module baudrate, it comes with auto baudrate.
   ^~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GSMSim/examples/GSMSim_DTMF/GSMSim_DTMF.ino:63:3: note: suggested alternative: 'Serial'
   Serial1.begin(115200); // If you dont change module baudrate, it comes with auto baudrate.
   ^~~~~~~
   Serial
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GSMSim/examples/GSMSim_DTMF/GSMSim_DTMF.ino: In function 'void loop()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GSMSim/examples/GSMSim_DTMF/GSMSim_DTMF.ino:111:6: error: 'Serial1' was not declared in this scope
   if(Serial1.available()) {
      ^~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GSMSim/examples/GSMSim_DTMF/GSMSim_DTMF.ino:111:6: note: suggested alternative: 'Serial'
   if(Serial1.available()) {
      ^~~~~~~
      Serial

examples/GSMSim_Email

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GSMSim/examples/GSMSim_Email/GSMSim_Email.ino:58:19: error: 'Serial1' was not declared in this scope
 GSMSimEmail email(Serial1, RESET_PIN); // GSMSimEmail inherit from GSMSimGPRS. You can use GSMSim and GSMSimGPRS methods with it.
                   ^~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GSMSim/examples/GSMSim_Email/GSMSim_Email.ino:58:19: note: suggested alternative: 'Serial'
 GSMSimEmail email(Serial1, RESET_PIN); // GSMSimEmail inherit from GSMSimGPRS. You can use GSMSim and GSMSimGPRS methods with it.
                   ^~~~~~~
                   Serial
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GSMSim/examples/GSMSim_Email/GSMSim_Email.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GSMSim/examples/GSMSim_Email/GSMSim_Email.ino:61:3: error: 'Serial1' was not declared in this scope
   Serial1.begin(115200); // If you dont change module baudrate, it comes with auto baudrate.
   ^~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GSMSim/examples/GSMSim_Email/GSMSim_Email.ino:61:3: note: suggested alternative: 'Serial'
   Serial1.begin(115200); // If you dont change module baudrate, it comes with auto baudrate.
   ^~~~~~~
   Serial
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GSMSim/examples/GSMSim_Email/GSMSim_Email.ino: In function 'void loop()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GSMSim/examples/GSMSim_Email/GSMSim_Email.ino:128:6: error: 'Serial1' was not declared in this scope
   if(Serial1.available()) {
      ^~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GSMSim/examples/GSMSim_Email/GSMSim_Email.ino:128:6: note: suggested alternative: 'Serial'
   if(Serial1.available()) {
      ^~~~~~~
      Serial

examples/GSMSim_HTTP

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GSMSim/examples/GSMSim_HTTP/GSMSim_HTTP.ino:57:17: error: 'Serial1' was not declared in this scope
 GSMSimHTTP http(Serial1, RESET_PIN); // GSMSimHTTP inherit from GSMSimGPRS. You can use GSMSim and GSMSimGPRS methods with it.
                 ^~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GSMSim/examples/GSMSim_HTTP/GSMSim_HTTP.ino:57:17: note: suggested alternative: 'Serial'
 GSMSimHTTP http(Serial1, RESET_PIN); // GSMSimHTTP inherit from GSMSimGPRS. You can use GSMSim and GSMSimGPRS methods with it.
                 ^~~~~~~
                 Serial
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GSMSim/examples/GSMSim_HTTP/GSMSim_HTTP.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GSMSim/examples/GSMSim_HTTP/GSMSim_HTTP.ino:60:3: error: 'Serial1' was not declared in this scope
   Serial1.begin(115200); // If you dont change module baudrate, it comes with auto baudrate.
   ^~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GSMSim/examples/GSMSim_HTTP/GSMSim_HTTP.ino:60:3: note: suggested alternative: 'Serial'
   Serial1.begin(115200); // If you dont change module baudrate, it comes with auto baudrate.
   ^~~~~~~
   Serial
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GSMSim/examples/GSMSim_HTTP/GSMSim_HTTP.ino: In function 'void loop()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GSMSim/examples/GSMSim_HTTP/GSMSim_HTTP.ino:129:6: error: 'Serial1' was not declared in this scope
   if(Serial1.available()) {
      ^~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GSMSim/examples/GSMSim_HTTP/GSMSim_HTTP.ino:129:6: note: suggested alternative: 'Serial'
   if(Serial1.available()) {
      ^~~~~~~
      Serial

examples/GSMSim_Module_Info

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GSMSim/examples/GSMSim_Module_Info/GSMSim_Module_Info.ino:36:12: error: 'Serial1' was not declared in this scope
 GSMSim gsm(Serial1, RESET_PIN);
            ^~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GSMSim/examples/GSMSim_Module_Info/GSMSim_Module_Info.ino:36:12: note: suggested alternative: 'Serial'
 GSMSim gsm(Serial1, RESET_PIN);
            ^~~~~~~
            Serial
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GSMSim/examples/GSMSim_Module_Info/GSMSim_Module_Info.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GSMSim/examples/GSMSim_Module_Info/GSMSim_Module_Info.ino:39:2: error: 'Serial1' was not declared in this scope
  Serial1.begin(115200); // If you dont change module baudrate, it comes with auto baudrate.
  ^~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GSMSim/examples/GSMSim_Module_Info/GSMSim_Module_Info.ino:39:2: note: suggested alternative: 'Serial'
  Serial1.begin(115200); // If you dont change module baudrate, it comes with auto baudrate.
  ^~~~~~~
  Serial
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GSMSim/examples/GSMSim_Module_Info/GSMSim_Module_Info.ino: In function 'void loop()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GSMSim/examples/GSMSim_Module_Info/GSMSim_Module_Info.ino:77:5: error: 'Serial1' was not declared in this scope
  if(Serial1.available()) {
     ^~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GSMSim/examples/GSMSim_Module_Info/GSMSim_Module_Info.ino:77:5: note: suggested alternative: 'Serial'
  if(Serial1.available()) {
     ^~~~~~~
     Serial

examples/GSMSim_SMS

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GSMSim/examples/GSMSim_SMS/GSMSim_SMS.ino:58:15: error: 'Serial1' was not declared in this scope
 GSMSimSMS sms(Serial1, RESET_PIN); // GSMSimSMS inherit from GSMSim. You can use GSMSim methods with it.
               ^~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GSMSim/examples/GSMSim_SMS/GSMSim_SMS.ino:58:15: note: suggested alternative: 'Serial'
 GSMSimSMS sms(Serial1, RESET_PIN); // GSMSimSMS inherit from GSMSim. You can use GSMSim methods with it.
               ^~~~~~~
               Serial
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GSMSim/examples/GSMSim_SMS/GSMSim_SMS.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GSMSim/examples/GSMSim_SMS/GSMSim_SMS.ino:61:3: error: 'Serial1' was not declared in this scope
   Serial1.begin(115200); // If you dont change module baudrate, it comes with auto baudrate.
   ^~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GSMSim/examples/GSMSim_SMS/GSMSim_SMS.ino:61:3: note: suggested alternative: 'Serial'
   Serial1.begin(115200); // If you dont change module baudrate, it comes with auto baudrate.
   ^~~~~~~
   Serial
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GSMSim/examples/GSMSim_SMS/GSMSim_SMS.ino: In function 'void loop()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GSMSim/examples/GSMSim_SMS/GSMSim_SMS.ino:112:6: error: 'Serial1' was not declared in this scope
   if(Serial1.available()) {
      ^~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GSMSim/examples/GSMSim_SMS/GSMSim_SMS.ino:112:6: note: suggested alternative: 'Serial'
   if(Serial1.available()) {
      ^~~~~~~
      Serial

examples/GSMSim_Time

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GSMSim/examples/GSMSim_Time/GSMSim_Time.ino:57:21: error: 'Serial1' was not declared in this scope
 GSMSimTime dateTime(Serial1, RESET_PIN); // GSMSimTime inherit from GSMSimGPRS. You can use GSMSim and GSMSimGPRS methods with it.
                     ^~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GSMSim/examples/GSMSim_Time/GSMSim_Time.ino:57:21: note: suggested alternative: 'Serial'
 GSMSimTime dateTime(Serial1, RESET_PIN); // GSMSimTime inherit from GSMSimGPRS. You can use GSMSim and GSMSimGPRS methods with it.
                     ^~~~~~~
                     Serial
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GSMSim/examples/GSMSim_Time/GSMSim_Time.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GSMSim/examples/GSMSim_Time/GSMSim_Time.ino:60:3: error: 'Serial1' was not declared in this scope
   Serial1.begin(115200); // If you dont change module baudrate, it comes with auto baudrate.
   ^~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GSMSim/examples/GSMSim_Time/GSMSim_Time.ino:60:3: note: suggested alternative: 'Serial'
   Serial1.begin(115200); // If you dont change module baudrate, it comes with auto baudrate.
   ^~~~~~~
   Serial
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GSMSim/examples/GSMSim_Time/GSMSim_Time.ino: In function 'void loop()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GSMSim/examples/GSMSim_Time/GSMSim_Time.ino:129:6: error: 'Serial1' was not declared in this scope
   if(Serial1.available()) {
      ^~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GSMSim/examples/GSMSim_Time/GSMSim_Time.ino:129:6: note: suggested alternative: 'Serial'
   if(Serial1.available()) {
      ^~~~~~~
      Serial

arduino:mbed_nano:nanorp2040connect @ 2.7.2

Inclusion

Result: PASS

Sketch uses 78756 bytes (0%) of program storage space. Maximum is 16777216 bytes.
Global variables use 43444 bytes (16%) of dynamic memory, leaving 226892 bytes for local variables. Maximum is 270336 bytes.

examples/GSMSim_Call

Result: PASS

Sketch uses 84704 bytes (0%) of program storage space. Maximum is 16777216 bytes.
Global variables use 43484 bytes (16%) of dynamic memory, leaving 226852 bytes for local variables. Maximum is 270336 bytes.

examples/GSMSim_DTMF

Result: PASS

Sketch uses 85174 bytes (0%) of program storage space. Maximum is 16777216 bytes.
Global variables use 43484 bytes (16%) of dynamic memory, leaving 226852 bytes for local variables. Maximum is 270336 bytes.

examples/GSMSim_Email

Result: PASS

Sketch uses 85880 bytes (0%) of program storage space. Maximum is 16777216 bytes.
Global variables use 43520 bytes (16%) of dynamic memory, leaving 226816 bytes for local variables. Maximum is 270336 bytes.

examples/GSMSim_HTTP

Result: PASS

Sketch uses 88796 bytes (0%) of program storage space. Maximum is 16777216 bytes.
Global variables use 43520 bytes (16%) of dynamic memory, leaving 226816 bytes for local variables. Maximum is 270336 bytes.

examples/GSMSim_Module_Info

Result: PASS

Sketch uses 82814 bytes (0%) of program storage space. Maximum is 16777216 bytes.
Global variables use 43480 bytes (16%) of dynamic memory, leaving 226856 bytes for local variables. Maximum is 270336 bytes.

examples/GSMSim_SMS

Result: PASS

Sketch uses 86272 bytes (0%) of program storage space. Maximum is 16777216 bytes.
Global variables use 43484 bytes (16%) of dynamic memory, leaving 226852 bytes for local variables. Maximum is 270336 bytes.

examples/GSMSim_Time

Result: PASS

Sketch uses 85156 bytes (0%) of program storage space. Maximum is 16777216 bytes.
Global variables use 43520 bytes (16%) of dynamic memory, leaving 226816 bytes for local variables. Maximum is 270336 bytes.

arduino:megaavr:nona4809 @ 1.8.7

Inclusion

Result: PASS

Sketch uses 802 bytes (1%) of program storage space. Maximum is 49152 bytes.
Global variables use 22 bytes (0%) of dynamic memory, leaving 6122 bytes for local variables. Maximum is 6144 bytes.

examples/GSMSim_Call

Result: PASS

Sketch uses 9839 bytes (20%) of program storage space. Maximum is 49152 bytes.
Global variables use 359 bytes (5%) of dynamic memory, leaving 5785 bytes for local variables. Maximum is 6144 bytes.

examples/GSMSim_DTMF

Result: PASS

Sketch uses 10425 bytes (21%) of program storage space. Maximum is 49152 bytes.
Global variables use 359 bytes (5%) of dynamic memory, leaving 5785 bytes for local variables. Maximum is 6144 bytes.

examples/GSMSim_Email

Result: PASS

Sketch uses 12401 bytes (25%) of program storage space. Maximum is 49152 bytes.
Global variables use 377 bytes (6%) of dynamic memory, leaving 5767 bytes for local variables. Maximum is 6144 bytes.

examples/GSMSim_HTTP

Result: PASS

Sketch uses 15712 bytes (31%) of program storage space. Maximum is 49152 bytes.
Global variables use 377 bytes (6%) of dynamic memory, leaving 5767 bytes for local variables. Maximum is 6144 bytes.

examples/GSMSim_Module_Info

Result: PASS

Sketch uses 7538 bytes (15%) of program storage space. Maximum is 49152 bytes.
Global variables use 357 bytes (5%) of dynamic memory, leaving 5787 bytes for local variables. Maximum is 6144 bytes.

examples/GSMSim_SMS

Result: PASS

Sketch uses 12316 bytes (25%) of program storage space. Maximum is 49152 bytes.
Global variables use 360 bytes (5%) of dynamic memory, leaving 5784 bytes for local variables. Maximum is 6144 bytes.

examples/GSMSim_Time

Result: PASS

Sketch uses 10992 bytes (22%) of program storage space. Maximum is 49152 bytes.
Global variables use 377 bytes (6%) of dynamic memory, leaving 5767 bytes for local variables. Maximum is 6144 bytes.

arduino:samd:mkrwifi1010 @ 1.8.12

Inclusion

Result: PASS

Sketch uses 12156 bytes (4%) of program storage space. Maximum is 262144 bytes.
Global variables use 2996 bytes (9%) of dynamic memory, leaving 29772 bytes for local variables. Maximum is 32768 bytes.

examples/GSMSim_Call

Result: PASS

Sketch uses 17856 bytes (6%) of program storage space. Maximum is 262144 bytes.
Global variables use 3400 bytes (10%) of dynamic memory, leaving 29368 bytes for local variables. Maximum is 32768 bytes.

examples/GSMSim_DTMF

Result: PASS

Sketch uses 18428 bytes (7%) of program storage space. Maximum is 262144 bytes.
Global variables use 3400 bytes (10%) of dynamic memory, leaving 29368 bytes for local variables. Maximum is 32768 bytes.

examples/GSMSim_Email

Result: PASS

Sketch uses 19760 bytes (7%) of program storage space. Maximum is 262144 bytes.
Global variables use 3436 bytes (10%) of dynamic memory, leaving 29332 bytes for local variables. Maximum is 32768 bytes.

examples/GSMSim_HTTP

Result: PASS

Sketch uses 22676 bytes (8%) of program storage space. Maximum is 262144 bytes.
Global variables use 3436 bytes (10%) of dynamic memory, leaving 29332 bytes for local variables. Maximum is 32768 bytes.

examples/GSMSim_Module_Info

Result: PASS

Sketch uses 15560 bytes (5%) of program storage space. Maximum is 262144 bytes.
Global variables use 3396 bytes (10%) of dynamic memory, leaving 29372 bytes for local variables. Maximum is 32768 bytes.

examples/GSMSim_SMS

Result: PASS

Sketch uses 19732 bytes (7%) of program storage space. Maximum is 262144 bytes.
Global variables use 3404 bytes (10%) of dynamic memory, leaving 29364 bytes for local variables. Maximum is 32768 bytes.

examples/GSMSim_Time

Result: PASS

Sketch uses 18720 bytes (7%) of program storage space. Maximum is 262144 bytes.
Global variables use 3436 bytes (10%) of dynamic memory, leaving 29332 bytes for local variables. Maximum is 32768 bytes.

esp32:esp32:d1_mini32 @ 1.0.6

Inclusion

Result: PASS

Sketch uses 201418 bytes (15%) of program storage space. Maximum is 1310720 bytes.
Global variables use 13168 bytes (4%) of dynamic memory, leaving 314512 bytes for local variables. Maximum is 327680 bytes.

examples/GSMSim_Call

Result: PASS

Sketch uses 214514 bytes (16%) of program storage space. Maximum is 1310720 bytes.
Global variables use 13528 bytes (4%) of dynamic memory, leaving 314152 bytes for local variables. Maximum is 327680 bytes.

examples/GSMSim_DTMF

Result: PASS

Sketch uses 215538 bytes (16%) of program storage space. Maximum is 1310720 bytes.
Global variables use 13528 bytes (4%) of dynamic memory, leaving 314152 bytes for local variables. Maximum is 327680 bytes.

examples/GSMSim_Email

Result: PASS

Sketch uses 217742 bytes (16%) of program storage space. Maximum is 1310720 bytes.
Global variables use 13568 bytes (4%) of dynamic memory, leaving 314112 bytes for local variables. Maximum is 327680 bytes.

examples/GSMSim_HTTP

Result: PASS

Sketch uses 222706 bytes (16%) of program storage space. Maximum is 1310720 bytes.
Global variables use 13568 bytes (4%) of dynamic memory, leaving 314112 bytes for local variables. Maximum is 327680 bytes.

examples/GSMSim_Module_Info

Result: PASS

Sketch uses 211702 bytes (16%) of program storage space. Maximum is 1310720 bytes.
Global variables use 13528 bytes (4%) of dynamic memory, leaving 314152 bytes for local variables. Maximum is 327680 bytes.

examples/GSMSim_SMS

Result: PASS

Sketch uses 218590 bytes (16%) of program storage space. Maximum is 1310720 bytes.
Global variables use 13536 bytes (4%) of dynamic memory, leaving 314144 bytes for local variables. Maximum is 327680 bytes.

examples/GSMSim_Time

Result: PASS

Sketch uses 215902 bytes (16%) of program storage space. Maximum is 1310720 bytes.
Global variables use 13568 bytes (4%) of dynamic memory, leaving 314112 bytes for local variables. Maximum is 327680 bytes.